1pcs,5A Active Balancer/Active Equalizer Capacitor Board 4S 8S 16S, Lithium ion,LTO Lithium Battery (Size : 9-14S 5A)
Asin: B0CWSKT2GZ | Model: SYNZPLHG | PartNumber: SYNZPLHG | Ean: 6473760034624
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Brand: SYNZPLHG | Manufacturer: SYNZPLHG
Weight: 0.44 pounds
See On Amazon Similar To 1pcs5A Active Balancer Active Equalizer
#1
5A 3S 4S 12V Battery Active Equalizer Whole Group Balancer LiFePO4 LFP Lipo Li-ion Lithium Active Battery Energy Transfer Equalization Capacitor Balancer PCB Module with Acrylic Protective Case
Asin: B0BBRNF823 | Model: JWCABalancer-4S | PartNumber: JWCABalancer-4S | Ean: 0789513999000 | UPC: 789513999000
The Quiescent Current Is About 12Ma, And The Battery Capacity Is Recommended To Be Used Between 30-300Ah!.
Note: Before Connect The Balance Cable To The Balance Board, Be Sure To Check Whether The Connections Of Each Section Of The Battery Pack Are Correct, And Do A Good Job Of Insulating The Bottom Of The Board And The Battery String Connection Terminals. Otherwise, It Will Short-Circuit And Burn The Board..
With Under-Voltage Sleep Protection, Only Detecting The Battery Voltage Of B1, The Equalizer Will Automatically Stop Entering The Sleep State When The B1 Voltage Is Lower Than 2.7V, And The Standby Power Consumption Is Less Than 0.1Ma..
Working Principle: Flying Capacitor Transfer Charge Transporter, Balancer Board Is Connected To The Battery To Start The Balance Work, Using The Original Brand New Ultra-Low Internal Resistance Mos, 2Oz Copper Thickness Pcb, Balance Current 0-5.5A, The More Balanced The Battery Current Is Small, Reserved For The Dormant Switch Wiring Position, The Dormant Power-Off Mode Working Current Is Less Than 0.1Ma, And The Balance Voltage Accuracy Is Within 5Mv!.
Features
- Working Voltage: 2.7V-4.2V, suitable for NCM Ternary polymer lithium battery (Li-ion), lithium iron phosphate battery (LiFePO4). It can Not fit LTO battery. If it is used for 3S, the last line B4+ is empty. (Note: The default protective case is a kit, not assembled, the transparent acrylic case has a yellow protective film that can be peeled off. )
- Working Principle: Flying capacitor transfer charge transporter, Balancer board is connected to the battery to start the balance work, using the original brand new ultra-low internal resistance MOS, 2OZ copper thickness PCB, balance current 0-5.5A, the more balanced the battery current is Small, reserved for the dormant switch wiring position, the dormant power-off mode working current is less than 0.1mA, and the balance voltage accuracy is within 5mv!
- The quiescent current is about 12mA, and the battery capacity is recommended to be used between 30-300AH!
- With under-voltage sleep protection, only detecting the battery voltage of B1, the equalizer will automatically stop entering the sleep state when the B1 voltage is lower than 2.7V, and the standby power consumption is less than 0.1mA.
- Note: Before connect the balance cable to the balance board, be sure to check whether the connections of each section of the battery pack are correct, and do a good job of insulating the bottom of the board and the battery string connection terminals. Otherwise, it will short-circuit and burn the board.
- See more on Amazon...
Brand: XFYBZN | Manufacturer: XFYBZN
Dimensions: 0.63 x 2.60 x 1.80 inches | Weight: 0.22 pounds
Warranty: Manufacturer warranty for 90 days from date of purchase.
See On Amazon #2
6S 7S 8S 5A Active Equalizer Balancer 8S Equalizer Lifepo4 Li-ion Lithium Lipo/Titanate LTO Energy Transfer Board Whole Group Capacitor Balancer PCB
Asin: B096NNRSMV | Model: JW-CAP-Balancer-8S | PartNumber: JW-CAP-Balancer-8S | Ean: 0723258876165 | UPC: 723258876165
Working Voltage: 1.8V-4.5V, Suitable For Li-Ion,Lifepo4,Lto Battery. The Quiescent Current Is About 7Ma, And The Battery Capacity Is Recommended To Be Used Between 30-200Ah/Per Balancer.High-Capacity Batteries Can Be Connected In Parallel With Multiple Equalizers. With Under-Voltage Sleep Protection, Only Detecting The B1 Battery Voltage, The Equalizer Will Automatically Stop Entering The Sleep State When B1 Voltage Ncm/Lfp<2.7V Or Lto<1.8V, And The Standby Power Consumption Is Less Than 0.1Ma..
The Quiescent Current Is About 7Ma, And The Battery Capacity Is Recommended To Be Used Between 30-200Ah/Per Balancer.High-Capacity Batteries Can Be Connected In Parallel With Multiple Equalizers. With Under-Voltage Sleep Protection, Only Detecting The B1 Battery Voltage, The Equalizer Will Automatically Stop Entering The Sleep State When The B1 Voltage Ncm/Lfp<2.7V Or Lto<1.8V, And The Standby Power Consumption Is Less Than 0.1Ma..
Working Principle: Flying Capacitor Transfer Charge Transporter, Balancer Board Is Connected To The Battery To Start The Balance Work, Using The Original Brand New Ultra-Low Internal Resistance Mos, 2Oz Copper Thickness Pcb. Balance Current 0-5.5A, The More Balanced The Battery Current Is Small, Reserved For The Dormant Switch Wiring Position, The Dormant Power-Off Mode Working Current Is Less Than 0.1Ma, And The Balance Voltage Accuracy Is Within 5Mv!.
【Note】: Before Connect The Balance Cable To The Balance Board, Be Sure To Check Whether The Connections Of Each Section Of The Battery Pack Are Correct, And Do A Good Job Of Insulating The Bottom Of The Board And The Battery String Connection Terminals. Default Setting Fit For Ncm/Lfp Battery, If You Use For Lto Battery, Please Remove The Previous Short Circuiting Pad And Then Re Short Circuiting The Lto Pad (With A Rectangular Short Circuiting Mark On The Board)..
Features
- USE Tips The voltage gap of each battery must be within 0.5V. When the battery voltage difference does not reach more than 0.1V, the light on the balance board is triggered by mistake. The light actually has no balance current when it lights up, and it will automatically go out after a period of time. So We suggest re-plugging the cable to solve the problem. Note that It takes time to equalize the voltage, hot is normal and it does not take effect immediately after plugging it in.
- NOTE : Before connect the balance cable to the balance board, be sure to check whether the connections of each section of the battery pack are correct, and do a good job of insulating the bottom of the board and the battery string connection terminals. DEFAULT setting fit for NCM/LFP battery, If you use for LTO battery, Please remove the previous short circuiting pad and then re short circuiting the LTO pad (with a rectangular short circuiting mark on the board).
- Working Voltage: 1.8V-4.5V, suitable for Li-ion,LiFePO4,LTO battery. The quiescent current is about 7mA, and the battery capacity is recommended to be used between 30-200AH/Per Balancer.High-capacity batteries can be connected in parallel with multiple equalizers. With under-voltage sleep protection, only detecting the B1 battery voltage, the equalizer will automatically stop entering the sleep state when B1 voltage NCM/LFP<2.7V or LTO<1.8V, and the standby power consumption is less than 0.1mA.
- Working Principle: Flying capacitor transfer charge transporter, Balancer board is connected to the battery to start the balance work, using the original brand new ultra-low internal resistance MOS, 2OZ copper thickness PCB. Balance current 0-5.5A, the more balanced the battery current is Small, reserved for the dormant switch wiring position, the dormant power-off mode working current is less than 0.1mA, and the balance voltage accuracy is within 5mv!
- The quiescent current is about 7mA, and the battery capacity is recommended to be used between 30-200AH/Per Balancer.High-capacity batteries can be connected in parallel with multiple equalizers. With under-voltage sleep protection, only detecting the B1 battery voltage, the equalizer will automatically stop entering the sleep state when the B1 voltage NCM/LFP<2.7V or LTO<1.8V, and the standby power consumption is less than 0.1mA.
- See more on Amazon...
Brand: QINIZX | Manufacturer: QINIZX
Dimensions: 0.63 x 3.58 x 2.75 Inches | Weight: 0.29 pounds
See On Amazon #3
Walfront Battery Active Equalizer Balancer Board Universal Energy Transfer Balancer 12 16S for LPO LFP 1.8V 4.5V
Asin: B09RX1GR4R | Model: Walfront0ghzkvoens6419 | PartNumber: Walfront0ghzkvoens6419
Working Current: Balance Current 0‑5.5A, The More Balanced The Smaller The Current, And The Sleep Mode Current Is Less Than 0.1Ma..
Applicable Battery: The Quiescent Current Is About 12Ma, Recommended To Use Battery With A Capacity Of 60‑300Ah..
Working Voltage: The Working Voltage Is 1.8V‑4.5V, The Balance Voltage Accuracy Is Within 5Mv, With High Efficiency..
High Performance: Adopt New Ultra Low Internal Resistance Mos, And 2Oz Copper Thickness Pcb, Stable In Transmission..
Features
- EASY OPERATION: Connect the lithium battery balance board to the top of the battery to start the balance work.
- HIGH PERFORMANCE: Adopt new ultra low internal resistance MOS, and 2oz copper thickness PCB, stable in transmission.
- WORKING CURRENT: Balance current 0 5.5A, the more balanced the smaller the current, and the sleep mode current is less than 0.1mA.
- WORKING VOLTAGE: The working voltage is 1.8V 4.5V, the balance voltage accuracy is within 5mv, with high efficiency.
- APPLICABLE BATTERY: The quiescent current is about 12mA, recommended to use battery with a capacity of 60 300AH.
- See more on Amazon...
Brand: Walfront | Manufacturer: Walfront
See On Amazon #4
100Balance 5A Battery Active Equalizer Balancer 14S for Lifepo4 or NCM Li-ion Lithium Battery Group BMS Energy Transfer Board with Blue ABS Case(14S)
Asin: B0CHYTCJ7L | Ean: 0725414469921 | UPC: 725414469921
Equalized Energy Dissipation Without Internal Resistance And Low Heat Generation For Long Time Connection To The Battery Pack..
We Provide 1 Year Product Warranty And 24/7 Online Service For Your Inquiry, Please Feel Free To Contact Us..
It Can Be Used In The Field Of Power Batteries (Electric Vehicles, Forklifts, Agvs, Cleaning Vehicles, Etc.), And Can Also Be Used In The Field Of Energy Storage (Outdoor Power Supply, Rv, Home Energy Storage, Base Station, Photovoltaic, Etc.).
Suitable For 3-16S Li-Ion Battery Pack And Lifepo4 Battery Pack. Please Note The Battery Strings Must Be Matched To The Active Balancer Strings..
Features
- This is an active equalization module for lithium batteries, which can be compatible with all other brands of BMS.
- Suitable for 3-16S Li-ion battery pack and LiFepo4 battery pack. Please note the battery strings must be matched to the active balancer strings.
- Equalized energy dissipation without internal resistance and low heat generation for long time connection to the battery pack.
- It can be used in the field of power batteries (electric vehicles, forklifts, AGVs, cleaning vehicles, etc.), and can also be used in the field of energy storage (outdoor power supply, RV, home energy storage, base station, photovoltaic, etc.)
- We provide 1 year product warranty and 24/7 online service for your inquiry, please feel free to contact us.
- See more on Amazon...
Brand: 100 BALANCE | Manufacturer: Dongguan Balanced Management Technology Co., Ltd
Dimensions: 0.83 x 6.42 x 2.56 Inches
See On Amazon #5
3S 4S 5.5A Capacitor Active Equalizer Balancer Lifepo4 Lithium Lipo Battery Energy Transfer Active Equalization Whole Group Balancer
Asin: B09MS8Z58H | Model: JWCABalancer-4S | PartNumber: JWCABalancer-4S | Ean: 0721927465870 | UPC: 721927465870
The Quiescent Current Is About 12Ma, And The Battery Capacity Is Recommended To Be Used Between 30-300Ah!.
Note: Before Connect The Balance Cable To The Balance Board, Be Sure To Check Whether The Connections Of Each Section Of The Battery Pack Are Correct, And Do A Good Job Of Insulating The Bottom Of The Board And The Battery String Connection Terminals. Otherwise, It Will Short-Circuit And Burn The Board..
With Under-Voltage Sleep Protection, Only Detecting The Battery Voltage Of B1, The Equalizer Will Automatically Stop Entering The Sleep State When The B1 Voltage Is Lower Than 2.7V, And The Standby Power Consumption Is Less Than 0.1Ma..
Working Principle: Flying Capacitor Transfer Charge Transporter, Balancer Board Is Connected To The Battery To Start The Balance Work, Using The Original Brand New Ultra-Low Internal Resistance Mos, 2Oz Copper Thickness Pcb, Balance Current 0-5.5A, The More Balanced The Battery Current Is Small, Reserved For The Dormant Switch Wiring Position, The Dormant Power-Off Mode Working Current Is Less Than 0.1Ma, And The Balance Voltage Accuracy Is Within 5Mv!.
Features
- Working Voltage: 2.7V-4.2V, suitable for NCM Ternary polymer lithium battery (Li-ion), lithium iron phosphate battery (LiFePO4). It can Not fit LTO battery. If it is used for 3S, the last line B4+ is empty.
- Working Principle: Flying capacitor transfer charge transporter, Balancer board is connected to the battery to start the balance work, using the original brand new ultra-low internal resistance MOS, 2OZ copper thickness PCB, balance current 0-5.5A, the more balanced the battery current is Small, reserved for the dormant switch wiring position, the dormant power-off mode working current is less than 0.1mA, and the balance voltage accuracy is within 5mv!
- The quiescent current is about 12mA, and the battery capacity is recommended to be used between 30-300AH!
- With under-voltage sleep protection, only detecting the battery voltage of B1, the equalizer will automatically stop entering the sleep state when the B1 voltage is lower than 2.7V, and the standby power consumption is less than 0.1mA.
- Note: Before connect the balance cable to the balance board, be sure to check whether the connections of each section of the battery pack are correct, and do a good job of insulating the bottom of the board and the battery string connection terminals. Otherwise, it will short-circuit and burn the board.
- See more on Amazon...
Brand: XFYBZN | Manufacturer: XFYBZN
Dimensions: 1.33 x 3.63 x 3.05 Inches | Weight: 0.13 pounds
Warranty: 60-day warranty
See On Amazon #6
100Balance Hardware1A Active Balancer 4S Equalizer for Lifepo4 or Li-ion Lithium Battery Group BMS Energy Transfer Board with Blue ABS Case(4S)
Asin: B0CHMTY1T9 | Ean: 0725414469631 | UPC: 725414469631
Equalized Energy Dissipation Without Internal Resistance And Low Heat Generation For Long Time Connection To The Battery Pack..
We Provide 1 Year Product Warranty And 24/7 Online Service For Your Inquiry, Please Feel Free To Contact Us..
It Can Be Used In The Field Of Power Batteries (Electric Vehicles, Forklifts, Agvs, Cleaning Vehicles, Etc.), And Can Also Be Used In The Field Of Energy Storage (Outdoor Power Supply, Rv, Home Energy Storage, Base Station, Photovoltaic, Etc.).
Suitable For 3-16S Li-Ion Battery Pack And Lifepo4 Battery Pack. Please Note The Battery Strings Must Be Matched To The Active Balancer Strings..
Features
- This is an active equalization module for lithium batteries, which can be compatible with all other brands of BMS.
- Suitable for 3-16S Li-ion battery pack and LiFepo4 battery pack. Please note the battery strings must be matched to the active balancer strings.
- Equalized energy dissipation without internal resistance and low heat generation for long time connection to the battery pack.
- It can be used in the field of power batteries (electric vehicles, forklifts, AGVs, cleaning vehicles, etc.), and can also be used in the field of energy storage (outdoor power supply, RV, home energy storage, base station, photovoltaic, etc.)
- We provide 1 year product warranty and 24/7 online service for your inquiry, please feel free to contact us.
- See more on Amazon...
Brand: 100 BALANCE | Manufacturer: Dongguan Balanced Management Technology Co., Ltd
Dimensions: 0.71 x 2.36 x 1.38 Inches
See On Amazon #7
Battery Active Equalizer Universal Cell Balancer - Easy Operation, Secure Working, Better Designs - LiFePo4 LTO NCM LFP (3-4S)
Asin: B0CDJ6XYQT | Model: Hyuduooyi9erkapt-11 | PartNumber: Hyuduooyi9erkapt-11
[Secure Working] - Built With Low Internal Resistance Mos And 2Oz Copper Thick Pcb For Safe And Efficient Balancing..
[Wider Utility] - Allows For Broad Application On Various Battery Types, Including Ncm, Lfp, And Lto..
[Practical Uses] - Suitable For Batteries With A Capacity Of 60-300Ah. Ideal For Li2tio3, Lifepo4, Ncm, And More..
[Easy Operation] - Simply Connect It To Your Battery And Start Equalization. No Complicated Setup Required..
Features
- [BETTER DESIGNS] - Features a reserved position for sleep switch wiring, low sleep mode current, and accurate balance voltage.
- [EASY OPERATION] - Simply connect it to your battery and start equalization. No complicated setup required.
- [SECURE WORKING] - Built with low internal resistance MOS and 2OZ copper thick PCB for safe and efficient balancing.
- [PRACTICAL USES] - Suitable for batteries with a capacity of 60-300AH. Ideal for Li2TiO3, LiFePo4, NCM, and more.
- [WIDER UTILITY] - Allows for broad application on various battery types, including NCM, LFP, and LTO.
- See more on Amazon...
Brand: Hyuduo | Manufacturer: Hyuduo
See On Amazon #8
Active Equalizer Balancer, Lithium Battery Cell Energy Transfer Board 4 Series 6A Equalization Board
Asin: B0BR8DBYBM | Model: Hilitandih6vn7y2zt | PartNumber: Hilitandih6vn7y2zt
【High Accurate】 The Price Is Lower Than Similar Capacitor Products, Which Keeps Each Battery Balanced And Prolongs The Service Life Of The Battery..
【Capacitance Principle】 No External Power Supply Is Required,The Working Principle Is Capacitor Fit Transfers The Transporter, Use The Internal Energy Transfer Of The Battery To Transfer And Balance The Entire Battery Pack.The Equalization Board Can Be Connected To The Battery To Start The Equalization Work..
【Applicability】With Simple Indicating Switch, It Is Suitable For People With Weak Base To Operate. All Ternary Lithium Batteries And Iron Lithium Batteries Are Universal..
【Active Capacitance Balance】 Using A Specially Customized Control Chip, Does Not Detect The Pressure Difference/Designed To Work For A Long Time Without Shutting Down..
Features
- Current The quiescent current is as low as 5mA, which can achieve a high accurate equalization of 5mV, and the equalization current is 2~6A (this refers to the limit current that the circuit board can withstand. In the case of small voltage difference or large internal resistance of the battery, the current is not so Big).
- Active Capacitance Balance Using a specially customized control chip, does not detect the pressure difference/designed to work for a long time without shutting down.
- High Accurate The price is lower than similar capacitor products, which keeps each battery balanced and prolongs the service life of the battery.
- Applicability With simple indicating switch, it is suitable for people with weak base to operate. All ternary lithium batteries and iron lithium batteries are universal.
- Capacitance Principle No external power supply is required,The working principle is Capacitor fit transfers the transporter, use the internal energy transfer of the battery to transfer and balance the entire battery pack.the equalization board can be connected to the battery to start the equalization work.
- See more on Amazon...
Brand: Hilitand | Manufacturer: Hilitand
See On Amazon #9
4S 5A 3S Active Equalizer Lifepo4 Lipo Lto Lithium Whole Group Balancer Active Battery Energy Transfer Equalization Capacitor
Asin: B0CCMSN14K
[Original Design]:Using The Original Ultra-Low Internal Resistance Mos, 2Oz Copper Thickness Pcb, Equalizing Current 0-5.5A, The More Balanced The Battery, The Lower The Current..
[Satisfactory Service]: Please Contact Us After Purchase, We Will Send You The Installation Program And Product Instruction Manual.We Provide 24-Hour Online Service,If You Encounter Any Problems, Please Email Seller Support (Not Amazon Support), We Will Give You A Perfect Solution..
[Capacitance Principle]: No External Power Supply Is Required,The Working Principle Is Capacitor Fit Transfers The Charge Transporter, Use The Internal Energy Transfer Of The Battery To Transfer And Balance The Entire Battery Pack. The Equalization Board Can Be Connected To The Battery To Start The Equalization Work..
[Protection Switch]: With Sleep Protection, When The Voltage Is Lower Than 3V, It Will Automatically Stop And Enter The Sleep State To Reduce The Damage To The Battery..
Features
- [Product Information]: Before connecting the equalization board, check whether each piece of wiring is correct, insulation between the bottom board and the battery connection terminals is required to prevent burnout. Model:3S-4S Suitable : Lithium Iron Phosphate 3.2V , NCM Ternary Polymer(3.7V),(Not Fit Lithium Titanate) ,Voltage is 1.8 V-4.5V ,Suggest Battery Capacity: 60-300AH.
- [Protection switch]: With sleep protection, when the voltage is lower than 3V, it will automatically stop and enter the sleep state to reduce the damage to the battery.
- [Original Design]:using the original ultra-low internal resistance MOS, 2OZ copper thickness PCB, equalizing current 0-5.5A, The more balanced the battery, the lower the current.
- [Capacitance Principle]: No external power supply is required,The working principle is Capacitor fit transfers the charge transporter, use the internal energy transfer of the battery to transfer and balance the entire battery pack. the equalization board can be connected to the battery to start the equalization work.
- [Satisfactory Service]: Please contact us after purchase, we will send you the installation program and product instruction manual.We Provide 24-hour online service,If you encounter any problems, Please email SELLER SUPPORT (Not Amazon support), we will give you a perfect solution.
- See more on Amazon...
Brand: Cywhrvzsf | Manufacturer: Cywhrvzsf
See On Amazon #10
Battery Active Equalizer Balancer Energy Transfer Board Accessory Lithium Lipo Battery Energy Active Equalizer(5S)
Asin: B09F6RPBZX | Model: Hilitandx9684a1oz56521-13 | PartNumber: Hilitandx9684a1oz56521-13
Brand: Hilitand | Manufacturer: Hilitand
See On Amazon
Looking For Something Else?
Search