Engine Splash Shield Guard Compatible with Honda Civic 2022 2023, Engine Case Guard Under Car Shield Cover OEM 74111T20A0 74111-T20-A00 Engine Splash Guard
Asin: B0CX1GQRV4 | Model: TMGESGUCIVI2022 | PartNumber: TMGESGUCIVI2022
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Noise And Vibration Reduction】: Not Only Do These Engine Splash Shield Guards Keep Safe Your Engine, They Also Dampen Engine Noise And Vibration. This Means You'll Enjoy A Quieter, Smoother Ride That Enhances Your Overall Driving Experience..
【Easy Installation】:We'll Include Gloves And Supporting Bolt Accessories To Make Installation Of Your Engine Splash Guard Shield Easy. With Our Engine Splash Guards, You Can Drive With Confidence Knowing Your Vehicle Is Fully Taken Care Of..
【Save Time And Money】: By Replacing Damaged Factory Parts Yourself With Our Engine Case Guard Under Car Shield Covers, You'll Avoid Costly Repairs. Our Engine Splash Shields Are Precisely Matched To Your Vehicle's Needs And Are As Compatible As Original Parts..
【High-Quality Aluminum Alloy】: Crafted From Durable Aluminum Alloy, Our Front Engine Splash Shields Fend Off Road Debris, Water, And Hazards, Provide Better Protection For The Engine And Extend Its Service Life..
Features
- Compatible Models : Our engine splash guard Compatible with Honda Civic 2022 2023 Engine Splash Guard Under Car Shield Cover Board OEM 74111T20A0 74111-T20-A00
- High-Quality Aluminum Alloy : Crafted from durable aluminum alloy, our front engine splash shields fend off road debris, water, and hazards, provide better protection for the engine and extend its service life.
- Noise and Vibration Reduction : Not only do these engine splash shield guards keep safe your engine, they also dampen engine noise and vibration. This means you'll enjoy a quieter, smoother ride that enhances your overall driving experience.
- Save Time and Money : By replacing damaged factory parts yourself with our engine case guard under car shield covers, you'll avoid costly repairs. Our engine splash shields are precisely matched to your vehicle's needs and are as compatible as original parts.
- Easy Installation :We'll include gloves and supporting bolt accessories to make installation of your engine splash guard shield easy. With our engine splash guards, you can drive with confidence knowing your vehicle is fully taken care of.
- See more on Amazon...
Brand: TomGoo | Manufacturer: TomGoo
Warranty: 30 days
See On Amazon Similar To Engine Splash Shield Guard Compatible
#1
Rexka 15 pcs Fender Liner Bumper Cover Splash Shield Wheelhouse Liner Bolt Screw Compatible with GM 11570498 Chevrolet Camaro Colorado Corvette Cruze Equinox Silverado Malibu Traverse Cadillac Buick
Asin: B07H8B6BF4 | Ean: 0712885453320 | UPC: 712885453320
Replaces Gm 11570498 ,Black Finish 4.2 - 1.41 X 20Mm, 7Mm Indented Hex Head, Loose Washer.
Meet Or Exceed Oem Specification. Direct Fitment..
Included With Fender Liner, Upper Center Pillar Trim, Grille Assembly, Rocker Molding, Spoiler, Deflector. License Plate Bracket, Bumper Cover, Console Trim Panel, Radiator Support Baffle.
Other Names: Mount Bracket Bolt, Grille Assembly Upper Bolt, Corner Trim Bolt, Windshield Pillar Trim Bolt, Impact Bar Bolt, Bumper Cover Retainer, Side Impact Bag Bolt, Bumper Cover Lower Bolt, Side Cover Bolt, Center Duct Bolt, Lower Bracket Bolt, Tailpipe Extension Bolt, Absorber Bolt, Inlet Duct Bolt, Console Assembly Bolt, Upper Grille Bolt, Step Pad Bolt, Bracket Bolt, Grille Assembly Bolt, Vent Grille Bolt, Lower Absorber Bolt, Lower Support Bolt,Outer Brace Screw, Bumper Cover Screw,.
Features
- Other Names:Wheelhouse Liner Bolt, Bumper Cover Bolt, Guide Bracket Bolt, Bumper Filler Bolt, Lower Cover Bolt, Flare Retainer, Flare Bolt, Splash Shield Bolt, Upper Cap Bolt, Lower Deflector Bolt, Lower Baffle Bolt, Bumper Cover Upper Bolt, Daytime Run Lamp Bolt, Upper Center Pillar Trim Bolt, Guide Bolt, Lower Grille Upper Bolt, Headlamp Assembly Bolt, Outer Bracket Screw, Reinforcement Bolt, Fog Lamp Assembly Bolt, Inner Grille Bolt, Side Retainer Bolt, Wheelhouse Liner Screw
- Other Names: Mount Bracket Bolt, Grille Assembly Upper Bolt, Corner Trim Bolt, Windshield Pillar Trim Bolt, Impact Bar Bolt, Bumper Cover Retainer, Side Impact Bag Bolt, Bumper Cover Lower Bolt, Side Cover Bolt, Center Duct Bolt, Lower Bracket Bolt, Tailpipe Extension Bolt, Absorber Bolt, Inlet Duct Bolt, Console Assembly Bolt, Upper Grille Bolt, Step Pad Bolt, Bracket Bolt, Grille Assembly Bolt, Vent Grille Bolt, Lower Absorber Bolt, Lower Support Bolt,Outer Brace Screw, Bumper Cover Screw,
- Replaces GM 11570498 ,Black Finish 4.2 - 1.41 x 20mm, 7mm Indented Hex Head, Loose Washer
- Included With Fender Liner, Upper Center Pillar Trim, Grille Assembly, Rocker Molding, Spoiler, Deflector. License Plate Bracket, Bumper Cover, Console Trim Panel, Radiator Support Baffle
- Meet or Exceed OEM Specification. Direct Fitment.
- See more on Amazon...
Brand: Rexka | Manufacturer: Yongtao
Weight: 0.20 Pounds
See On Amazon #2
GOOACC GRC-70 35PCS Engine Under Cover Splash Shield Guard Body Bolts Bumper Fender Liner Push Retainer Fastener Rivet Clips , black
Asin: B07TKB45PP | Model: GRC-70 | PartNumber: GRC-70 | Ean: 0767912576855 | UPC: 767912576855
The Clips Are Widely Used For Radiator Yoke Trim Panel Door Trim Door Panel Bumper Car Fender Flare Side Skirt Grille Wheel Well Air Intake Engine Cover Mud Flap And Splash Guard Shield Retainers Rivet Clips Replacement.
Package Includes 10Pcs Extruded U-Nuts - Replace/Fix To The Bumper(Corrosion Resistant) 15Pcs Body Bolts With Built-In Fender Washer (Corrosion Resistant) 10Pcs Plastic Push Clips As Pictured.
Fits Infiniti G35 G37 Fx35 Fx45 Ex35 Nissan 370Z 350Z (See Details).
The Extruded U-Nuts Can Be Used To Replace/Fix To The Bumper.
Features
- Brand New Engine Splash Shield Bolts Hardware Kit Fender Bumper Clips Rivets direct replacement and perfect fitment.Fit Type: Universal
- The extruded U-nuts can be used to replace/fix to the bumper
- The clips are widely used for radiator yoke trim panel door trim door panel bumper car fender flare side skirt grille wheel well air intake engine cover mud flap and splash guard shield retainers rivet clips replacement
- Fits Infiniti G35 G37 FX35 FX45 EX35 Nissan 370Z 350Z (see details)
- Package includes 10pcs Extruded U-nuts - Replace/Fix to the Bumper(CORROSION RESISTANT) 15pcs Body Bolts with Built-in Fender Washer (CORROSION RESISTANT) 10pcs Plastic Push Clips as pictured
- See more on Amazon...
Brand: GOOACC | Manufacturer: GOOACC
Dimensions: 4.61 x 1.30 x 3.66 Inches | Weight: 0.40 Pounds
Warranty: 2 Years Warranty
See On Amazon #3
Zlirfy 35PCS Engine Under Cover Splash Shield Guard Body Bolts Screws,Bumper Fender Liner Push Retainer Fastener Rivet Clips,Bumper Clips Extruded U-Nuts Kit,Replacement for G35 G37 FX35 FX45
Asin: B0C6XG1595 | Model: 551JGFHLS001 | PartNumber: 551JGFHLS001
[Compatible Models] G35 Sedan From 2003 To 2008; 2003-2007 G35 Sports Car; 2008-2014 G37 And G37x; 2003-2008 Fx35&Fx45; 2008-2012 Ex35; 370Z From 2009 To 2014, 350Z From 2003 To 2009..
[Essential] Universal Body Bolts Suitable For Cars, Including Screws And Fasteners For Installing The Lower Hood On The Car. If You Have An Old Car With Fragile And Rusty Clips, This Is A Must-Have..
[Widely Used] This Hood Hardware Kit Can Be Used For Door Trims, Door Panels, Trim Panels, Radiator Yokes, Bumpers, Car Fender Horns, Side Skirts, Grilles, Wheel Cabins, Air Intakes, Engine Hoods, Mudguards, And Fender Retainer Rivet Clips..
[Durable Materials]The Body Bolts Of The Engine Lower Cover Mudguard Are Made Of High Hardness Steel Or High-Quality Nylon Material, Which Is Resistant To Strong Impact And High-Pressure Wear. It Can Resist Factors Such As Road Salt, Water, And Dirt..
Features
- [Package Includes]The car clip kit includes 10 extruded U-nuts, 15 body bolts with built-in fender washers, and 10 plastic push clips. Sufficient quantity to meet your daily replacement needs.
- [Durable Materials]The body bolts of the engine lower cover mudguard are made of high hardness steel or high-quality nylon material, which is resistant to strong impact and high-pressure wear. It can resist factors such as road salt, water, and dirt.
- [Compatible Models] G35 sedan from 2003 to 2008; 2003-2007 G35 sports car; 2008-2014 G37 and G37X; 2003-2008 FX35&FX45; 2008-2012 EX35; 370Z from 2009 to 2014, 350Z from 2003 to 2009.
- [Widely Used] This hood hardware kit can be used for door trims, door panels, trim panels, radiator yokes, bumpers, car fender horns, side skirts, grilles, wheel cabins, air intakes, engine hoods, mudguards, and fender retainer rivet clips.
- [Essential] Universal body bolts suitable for cars, including screws and fasteners for installing the lower hood on the car. If you have an old car with fragile and rusty clips, this is a must-have.
- See more on Amazon...
Brand: Zlirfy | Manufacturer: Zlirfy
Dimensions: 0.39 x 0.39 x 0.39 Inches
See On Amazon #4
UNIGT Push Type Retainer Fender Liner Clips Compatible with Nissan/Infiniti Front Bumper Plastic Fasteners Replace 01553-05323, 01553-09321, 01553-09241, 11296-AG000 Radiator Rivets - 121pcs with Tool
Asin: B0B6VJDJST | Ean: 0713440558399 | UPC: 713440558399
30Pcs Body Fasteners Rivet Clips For Front Bumper Compatible With 2009-2017 370Z, 2008-2017 Rogue, 2016-2017 Titan, Etc. Fits Into 10Mm Hole. Replaces Oem: 01553-09241.
Package Includes 120Pcs Push Type Retainer Clips + 1Pcs Removal Tool, Widely Applicable To Nissan And Infiniti Cars, Made Of High-Quality Nylon Material For Long Last.
30Pcs Bumper Plastic Push Fasteners For Radiator Compatible With 2004-2010 Quest, 2007-2012 Sentra, 2012-2018 Versa, Etc. Fits Into 8Mm Hole. Replaces Oem: 11296-Ag000.
30Pcs Fender Liner Clips For Inter Panels Plastic Fasteners Compatible With 1995-2014 Maxima, 2003-2018 Murano, 1996-2018 Pathfinder, Etc. Fits Into 8Mm Hole. Replaces Oem: 01553-09321.
Features
- 30pcs Cowl mud flaps fender liner push-type retainer compatible with 2001-2014 Altima, 2005-2019 Frontier, 2014-2019 Infiniti Q50, etc. Fits Into 8mm Hole. Replaces OEM: 01553-05323
- 30pcs fender liner clips for inter panels plastic fasteners compatible with 1995-2014 Maxima, 2003-2018 Murano, 1996-2018 Pathfinder, etc. Fits Into 8mm Hole. Replaces OEM: 01553-09321
- 30pcs body fasteners rivet clips for front bumper compatible with 2009-2017 370Z, 2008-2017 Rogue, 2016-2017 Titan, etc. Fits Into 10mm Hole. Replaces OEM: 01553-09241
- 30pcs bumper plastic push fasteners for radiator compatible with 2004-2010 Quest, 2007-2012 Sentra, 2012-2018 Versa, etc. Fits Into 8mm Hole. Replaces OEM: 11296-AG000
- Package Includes 120pcs push type retainer clips + 1pcs removal tool, Widely applicable to Nissan and Infiniti cars, made of high-quality nylon material for long last
- See more on Amazon...
Brand: UNIGT | Manufacturer: UNIGT Auto Parts
See On Amazon #5
Rexka 10 Sets T30 Engine Splash Shield Guard Undertray Cover Screws Bolt Nut Clip Kit Compatible with Ford Focus Fusion Escape Explorer C-Max Transit Connect Lincoln MKC
Asin: B07R1NWDZ1 | Ean: 0742377994987 | UPC: 742377994987
10Pcs Red Nylon Under-Body Shield Nut. Other Names:Front Deflector Retainer Nut, Side Shield Nut, Under Cover Nut, Rear Deflector Nut, Deflector Nut, Lower Shield Retainer Nut, Under-Body Shield Nut, Lower Shield Nut, Shield Nut, Air Deflector Nut, Front Shield Nut, Lower Deflector Nut, Front Deflector Nut, Reservoir Assembly Nut, Front Deflector U-Nut, Rear Deflector U-Nut, Side Cover Nut, Air Shield Nut, Lower Deflector Retainer Nut, Bumper Cover Retainer, Rear Deflector Retainer.
Please Check The Installation In The Video Below.
10Pcs Under Cover U Nuts. Other Names:Reservoir Nut, Side Reinforced Nut, Under Cover Nut, Master Cylinder Nut, Side Support Nut, Cowl Grille Nut, Lower Shield Nut, Reinforced Panel Nut, Reservoir Tank Nut, Side Bracket Nut, Fender Liner Retainer, Ft Fender Liner Nut, Nut - Spring.
10Pcs T30 Torx Head Screw. Other Names:Fender Liner Bolt, Splash Shield Screw, Outer Bracket Screw, Lower Deflector Screw, Under Cover Screw, Bumper Cover Screw, Cowl Grille Screw, Reinforced Panel Screw, Fender Liner Screw, Valance Screw, Screw And Washer - Cross Rece.
Features
- Engine Splash Shield Undercar Bolt Clip Kits. Fits C-Max 2013-2018, Escape 2013-2019,Focus 2012-2018. Explorer 2016-2019,Transit Connect 2014-2019 etc
- 10pcs T30 torx head screw. Other Names:Fender Liner Bolt, Splash Shield Screw, Outer Bracket Screw, Lower Deflector Screw, Under Cover Screw, Bumper Cover Screw, Cowl Grille Screw, Reinforced Panel Screw, Fender Liner Screw, Valance Screw, Screw And Washer - Cross Rece
- 10pcs Red Nylon Under-Body Shield Nut. Other Names:Front Deflector Retainer Nut, Side Shield Nut, Under Cover Nut, Rear Deflector Nut, Deflector Nut, Lower Shield Retainer Nut, Under-Body Shield Nut, Lower Shield Nut, Shield Nut, Air Deflector Nut, Front Shield Nut, Lower Deflector Nut, Front Deflector Nut, Reservoir Assembly Nut, Front Deflector U-Nut, Rear Deflector U-Nut, Side Cover Nut, Air Shield Nut, Lower Deflector Retainer Nut, Bumper Cover Retainer, Rear Deflector Retainer
- 10pcs Under Cover U nuts. Other Names:Reservoir Nut, Side Reinforced Nut, Under Cover Nut, Master Cylinder Nut, Side Support Nut, Cowl Grille Nut, Lower Shield Nut, Reinforced Panel Nut, Reservoir Tank Nut, Side Bracket Nut, Fender Liner Retainer, Ft Fender Liner Nut, Nut - Spring
- Please Check the Installation in the Video Below
- See more on Amazon...
Brand: Rexka | Manufacturer: Yongtao
See On Amazon #6
Lower Engine Cover Pin Screws Bolts Splash Shield Hardware Compatible with Honda Accord Civic CR-V Acura 90674-TY2-A01 90105-TBA-A00
Asin: B0B9BL6NDZ | Model: 90674-TY2-A01 | PartNumber: 90674-TY2-A01 | Ean: 0764481273437 | UPC: 764481273437
[Ideal Replacement] These Splash Shield Hardware Screws Are Exact Match To Replace Your Broken Or Missing Retainers. Get Them And Say Goodbye To Engine Shield Dragging..
[Compatibility]The Radiator Support Splash Shield Bolts (Oem No: 90105-Tba-A00) Are Compatible With 2016-2021 Honda Civic And 2017-2010 Honda Cr-V..
[Compatibility] The Lower Engine Cover Pin Screws (Oem No: 90674-Ty2-A01) Are Compatible With Honda Accord 2014-2019, Honda Civic 2017-2019, Honda Cr-V 2017-19, Acura 2014 Tlx, Rlx And Ilx..
[Trust-Worthy Quality] Made Of Quality Automotive Grade Steel For Long Term Service. This Hardware Has Been Tested For Precise Fit..
Features
- [Package List] Package include 6 Pack Lower Engine Cover Pin Screws and 2 Pack radiator support splash shield bolts.
- [Trust-worthy Quality] Made of quality automotive grade steel for long term service. This hardware has been tested for precise fit.
- [Ideal Replacement] These splash shield hardware screws are exact match to replace your broken or missing retainers. Get them and say goodbye to engine shield dragging.
- [Compatibility] The lower engine cover pin screws (OEM No: 90674-TY2-A01) are compatible with Honda Accord 2014-2019, Honda Civic 2017-2019, Honda CR-V 2017-19, Acura 2014 TLX, RLX and ILX.
- [Compatibility]The radiator support splash shield bolts (OEM No: 90105-TBA-A00) are compatible with 2016-2021 Honda Civic and 2017-2010 Honda CR-V.
- See more on Amazon...
Brand: artapek | Manufacturer: artapek
Warranty: 1 year manufacturer
See On Amazon #7
Xislet 45PCS Universal Style Engine Under Cover Splash Shield Guard Body Bolts Bumper Fender Liner Push Retainer Fastener Rivet Clips Compatible with Most Brand of Vehicles
Asin: B08NSPS1KD | Ean: 0713440557903 | UPC: 713440557903
This Set Of Universal Fender Fastener Clips And Rivets Are Widely Used To Replace Or Repair Fender Bumper Cover, And Front Plastic Fender Wells, And Adapt To Engines' Front Slash Guard.
Package Includes: 15 X Extruded U-Nuts - Replace/Fix To The Bumper, 15 X Body Bolts With Built-In Fender Washer, 15 X Plastic Push Clips, 3 In 1 Enclosed Pack.
Universal Retainer Fastener Rivet Clips Compatible With Infiniti G35 G37 Fx35 Fx45 Ex35 Nissan 370Z 350Z, Dodge Ram, Honda, Replace Grc-70 (Please Check Out The Product Description Below For More Details).
Well Made Universal Engine Splash Shield Bolts Repair Hardware Kit, 8Mm Plastic Rivets, And M6 U-Nuts With Bolts Were Used All Over The Place On Many Vehicles.
Features
- UNIVERSAL body bolt for cars, The UNIVERSAL assortment of screws and fasteners to keep the lower engine cover mounted to your car, a must-have if you have an old vehicle with brittle and rusted clips
- Well made universal engine splash shield bolts repair hardware kit, 8mm plastic rivets, and M6 u-nuts with bolts were used all over the place on many vehicles
- This set of universal fender fastener clips and rivets are widely used to replace or repair fender bumper cover, and front plastic fender wells, and adapt to engines' front slash guard
- Universal Retainer Fastener Rivet Clips Compatible with Infiniti G35 G37 FX35 FX45 EX35 Nissan 370Z 350Z, Dodge Ram, Honda, Replace GRC-70 (please check out the product description below for more details)
- Package includes: 15 X Extruded U-nuts - Replace/Fix to the Bumper, 15 X Body Bolts with Built-in Fender Washer, 15 X Plastic Push Clips, 3 in 1 enclosed pack
- See more on Amazon...
Brand: Xislet | Manufacturer: Xislet Auto Parts
See On Amazon #8
35Pcs Engine Under Cover Splash Shield Body Bolts Screws, Bumper Clips Extruded U-Nuts Kit Compatible with Nissan 350z 370z Infiniti G35 G37 EX35 FX35 FX45
Asin: B0BCQHXQ29 | Model: TOPCNOEM-clips35ps | PartNumber: TOPCNOEM-clips35ps
The Bumper Clips Widely Used For Clips Of Trim Panel,Door Trim,Door Panel,Bumper,Air Intake,Fender,Engine Cover And Splash Shield Retainers Repacement.
Simple To Install Without Complicated Installation Steps. It Is Definitely Cheaper Than Going To The Auto Parts Store !.
Compatible With Infiniti 2003-2008 G35 Sedan, 2003-2007 G35 Coupe,2008-2014 G37 & G37x,2003-2008 Fx35 & Fx45,2008-2012 Ex35; Compatible With Nissan 2009-2014 370Z,2003-2009 350Z..
High Quality - Resist Strong Impact And High Pressure Wear Resistance..
Features
- Includes - 15pcs bolts screws; 10pcs U units; 10pcs bumper clips
- High Quality - Resist strong impact and high pressure wear resistance.
- The bumper clips widely used for clips of trim panel,door trim,door panel,bumper,air intake,fender,engine cover and splash shield retainers repacement
- Compatible with Infiniti 2003-2008 G35 Sedan, 2003-2007 G35 Coupe,2008-2014 G37 & G37X,2003-2008 FX35 & FX45,2008-2012 EX35; Compatible with Nissan 2009-2014 370Z,2003-2009 350Z.
- Simple to install without complicated installation steps. It is definitely cheaper than going to the auto parts store !
- See more on Amazon...
Brand: TOPCNOEM | Manufacturer: TOPCNOEM
Dimensions: 0.01 x 0.01 x 0.01 Inches
See On Amazon #9
Xislet 120 Pcs POM Fastener Rivets Compatible with Honda Acura Accord Civic Fits Bumper and Fender Body Retainer Clips with Tool Replace - 91503-SZ3-003
Asin: B07GCJFR1S | Ean: 0608603170016 | UPC: 608603170016
Exact Replacement For The Old And Cracked Or Missing Clips, Perfectly To Re-Attach Your Honda's, Splash Guard, Front Bumper, Grille Fasteners Clips.
Affordable Price Fastener Rivets Fit For Honda Accord, Civic, Cr-V, Cr-Z, Element, Odyssey, Pilot, Ridgeline, Acura, Detailed Years See The Description Below.
Pls Check The Hole Size Before Purchasing, 2 Sizes Fastener Rivets Needed For Some Honda Parts, Ours Only 10Mm (Not 8Mm Included).
These Rivets Made Of High-Quality Pom Materials, Real Expands From 10 To 13Mm When Fastened, Solid And Fasten Securely (Not 11Mm Like Others).
Features
- Honda Body Clips are single-use, Come in a big bag of 120 Pcs with extras when you need to use them numerous times
- These rivets Made of High-quality POM materials, real expands from 10 to 13mm when fastened, solid and fasten securely (NOT 11mm like others)
- Exact replacement for the old and cracked or missing clips, perfectly to re-attach your Honda's, Splash Guard, Front Bumper, Grille Fasteners Clips
- PLS Check the hole size before purchasing, 2 sizes fastener rivets needed for some Honda parts, ours only 10mm (NOT 8mm included)
- Affordable price fastener rivets fit for Honda Accord, Civic, CR-V, CR-Z, Element, Odyssey, Pilot, Ridgeline, Acura, Detailed Years See the Description Below
- See more on Amazon...
Brand: Xislet | Manufacturer: Xislet
See On Amazon #10
100Pcs Nylon Engine Under Cover Push-Type Retainer Clips Engine Splash Shield Fender Liner Trunk Lid Trim with Bonus Fastener Remover Compatible with Toyota Lexus 90467-07201
Asin: B0BCQGNT43 | Model: TOPCNOEM-90467-07201-100ps | PartNumber: TOPCNOEM-90467-07201-100ps
Under Cover Retainer, Lower Extension Clip, Engine Under Cover Push-Type Retainer, Rear Duct Clip, Wheelhouse Liner Clip, Trunk Side Trim Clip, Side Duct Clip, Storage Cover Retainer, Grille Clip, Bumper Cover Clip, Grille Retainer, Door Trim Panel Clip, Spoiler Clip, Sight Shield Clip.
Compatible With Lexus: Ct200h, Es300, Es330, Es350, Gs F, Gs Turbo, Gs200t, Gs300, Gs350, Gx460, Hs250h, Is F, Is200t, Is250, Is300, Is350, Ls460, Ls600h, Rc200t, Rc300, Rc350, Rx350, Rx450h.
Compatible With Toyota: 4Runner, Avalon, Camry, Corolla, Corolla Im, Highlander, Matrix, Rav4, Sequoia, Solara, Tacoma, Tundra, Venza.
Compatible With Lexus Toyota 90467-07201.
Features
- 100PCS Push type retainer Clips + 1pcs Fastener Remover. Quality black nylon material, Head Diameter: 20mm, Stem Length: 10mm, Fits Into 7mm Hole
- Compatible with Lexus Toyota 90467-07201
- Under Cover Retainer, Lower Extension Clip, Engine Under Cover Push-Type Retainer, Rear Duct Clip, Wheelhouse Liner Clip, Trunk Side Trim Clip, Side Duct Clip, Storage Cover Retainer, Grille Clip, Bumper Cover Clip, Grille Retainer, Door Trim Panel Clip, Spoiler Clip, Sight Shield Clip
- Compatible with Toyota: 4Runner, Avalon, Camry, Corolla, Corolla iM, Highlander, Matrix, RAV4, Sequoia, Solara, Tacoma, Tundra, Venza
- Compatible with Lexus: CT200h, ES300, ES330, ES350, GS F, GS Turbo, GS200t, GS300, GS350, GX460, HS250h, IS F, IS200t, IS250, IS300, IS350, LS460, LS600h, RC200t, RC300, RC350, RX350, RX450h
- See more on Amazon...
Brand: TOPCNOEM | Manufacturer: TOPCNOEM
See On Amazon #11
Xislet 6 in 1 Fender Liner Retainer Clips 90682-SEA-003, Front Bumper Fastener 91512-SX0-003, Push-Type Plastic Rivet 91505-S9A-003, Compatible with Honda Acura Accord Civic CR-V Fit Odyssey - 131PCS
Asin: B09R41TJXQ | Model: XZFR008 | PartNumber: XZFR008 | Ean: 0713440558313 | UPC: 713440558313
20-Pcs Rear Front Bumper Cover Fender Grille Under Cover Push-Type Retainer Clip Fastener Rivet Fits Into 10Mm Hole, Directly Replaces: 91505-Tm8-003.
Fitment: Acura Ilx, Mdx, Rdx, Rlx, Tl, Tlx, Tsx, Accord, Civic, Cr-V, Crosstour, Fit, Hr-V, Insight, Odyssey, Passport, Pilot, Ridgeline Plastic Fastener Rivet Screw Replacement.
20-Pcs Bumper Fender Grille Retainer Replaces: 91506-S9a-003(Stem Length 16 Mm), 20-Pcs Splash Shield Clips Replace: 91505-S9a-003(Stem Length 13 Mm).
20-Pcs Front Bumper Cowl Grille Headlight Retainer Clips Fastener Directly Replaces: 91512-Sx0-003 / 20Pcs Fender Push-Type Retainer Replaces: 91501-Tr0-003, Fits Into 8Mm Hole.
Features
- 30-PCS fender apron liner mudguard retainer clip grommet rivets made of quality nylon, directly replaces: 90682-SEA-003
- 20-PCS front bumper cowl grille headlight retainer clips fastener directly replaces: 91512-SX0-003 / 20PCS fender push-type retainer replaces: 91501-TR0-003, fits into 8mm hole
- 20-PCS rear front bumper cover fender grille under cover push-type retainer clip fastener rivet fits into 10mm hole, directly replaces: 91505-TM8-003
- 20-PCS bumper fender grille retainer replaces: 91506-S9A-003(Stem Length 16 mm), 20-PCS splash shield clips replace: 91505-S9A-003(Stem Length 13 mm)
- Fitment: Acura ILX, MDX, RDX, RLX, TL, TLX, TSX, Accord, Civic, CR-V, Crosstour, Fit, HR-V, Insight, Odyssey, Passport, Pilot, Ridgeline Plastic Fastener Rivet Screw replacement
- See more on Amazon...
Brand: Xislet | Manufacturer: Xislet Auto Parts
See On Amazon #12
BOECIOG 35PCS Engine Under Cover Splash Shield Guard Body Bolts Screws, Front Bumper Fender Liner Push Retainer Fastener Rivet Clips, Automotive Hardware Bumper Clips, U-Nuts Kit, Elegant Black
Asin: B0CPPN4ZN6 | Model: 101510QCLSJGJ | PartNumber: 101510QCLSJGJ
Simple And Convenient Installation: Only Need To Fix It At The Correct Installation Point; Lightweight Accessories; Easy To Carry; Can Be Replaced Anytime And Anywhere..
Best Service: What We Have Been Pursuing Is To Provide Customers With Satisfactory Products And Services. In The Process Of Purchasing Products, If You Have Any Problems, You Can Contact Us At Any Time Via Email, And We Will Reply Within 24 Hours To Provide You With The Best Solution..
Compatible Model: 2003-2008 G35 Car, 2003-2007 G35 Sports Car, 2008-2014 G37 And G37x, 2003-2008 Fx35 And Fx45, 2008-2012 Ex35, The 370Z Ran From 2009-2014, And The 350Z Ran From 2003-2009..
The Set Includes: 15 Pcs Body Bolts With Built-In Fender, 10 Pcs Extruded U-Nuts, And 10 Pcs Nylon Push Clips..
Features
- APPLICATION: Widely used for door trim, fender, bumper, radiator shield yoke, side skirt, grille, engine cover, and splash shield retainers.
- THE SET INCLUDES: 15 PCS body bolts with built-in fender, 10 PCS extruded u-nuts, and 10 PCS nylon push clips.
- SIMPLE AND CONVENIENT INSTALLATION: Only need to fix it at the correct installation point; lightweight accessories; easy to carry; can be replaced anytime and anywhere.
- COMPATIBLE MODEL: 2003-2008 G35 car, 2003-2007 G35 sports car, 2008-2014 G37 and G37X, 2003-2008 FX35 and FX45, 2008-2012 EX35, the 370Z ran from 2009-2014, and the 350Z ran from 2003-2009.
- BEST SERVICE: What we have been pursuing is to provide customers with satisfactory products and services. In the process of purchasing products, if you have any problems, you can contact us at any time via email, and we will reply within 24 hours to provide you with the best solution.
- See more on Amazon...
Brand: BOECIOG | Manufacturer: BOECIOG
Dimensions: 0.85 x 0.67 x 0.24 Inches | Weight: 0.41 pounds
See On Amazon #13
KJAHLAL 35 Pcs Auto Engine Under Cover Splash Shield Body Bolts Screws, Bumper Clips Push and Pull U-Clip Fasteners are Compatible with Most Vehicles
Asin: B0CRB1CP68 | Model: ABC001 | PartNumber: ABC001
Models: Suitable For Infiniti G35 G37 Fx35 Fx45 Ex35 Nissan 370Z 350Z Toyota, Honda Etc..
After Sale: After-Sale Guarantee：If For Any Reason You Are Not Satisfied With Your Purchase, Please Contact Us And We Will Do Our Best To Resolve Your Issue..
Application: Can Be Used For Car Hood, Fender, Trim Plate Clip, Bumper Clip, Side Skirt Plate, Front Diagonal Shield, Grille And Fender Fastening Rivet Clip, Light Weight, Easy To Carry, And Easy To Grasp And Use, Push-In Car Clamp Installation Is Convenient And Quick..
Materials: Body Bolts With Built In Fender，Extruded U-Nuts, Strong Impact Resistance And High Pressure Wear Resistance, Prevent Mud From Splashing On The Body, Protect The Engine From Being Hit..
Features
- Package Includes: 35PCS auto parts includes, 10pcs extruded U-nuts, 15pcs body bolts with built-in fender washer, 10pcs nylon push clips.
- Materials: Body bolts with built in fender extruded U-nuts, strong impact resistance and high pressure wear resistance, prevent mud from splashing on the body, protect the engine from being hit.
- Models: Suitable for Infiniti G35 G37 FX35 FX45 EX35 Nissan 370Z 350Z Toyota, Honda etc.
- Application: Can be used for car hood, fender, trim plate clip, bumper clip, side skirt plate, front diagonal shield, grille and fender fastening rivet clip, Light weight, easy to carry, and easy to grasp and use, push-in car clamp installation is convenient and quick.
- After Sale: After-Sale Guarantee If for any reason you are not satisfied with your purchase, please contact us and we will do our best to resolve your issue.
- See more on Amazon...
Brand: KJAHLAL | Manufacturer: KJAHLAL
Dimensions: 0.85 x 0.66 x 0.66 Inches
See On Amazon #14
Rexka 20pcs Fender Liner Push-Type Retainer Clip Fastener Compatible with Hyundai Kia 86595-2T500 Accent,Azera,Elantra,Equus,Genesis, Ioniq, Kona,Santa Fe,Sonata,Tucson,Veloster,Optima,Sedona
Asin: B07FCNKV2D | Ean: 0712885451128 | UPC: 712885451128
Head Diameter: 18Mm Stem Length: 14Mm Fits Into 8Mm Hole.
Meet Or Exceed Oem Speicfication. Direct Fitment.
Replaces: Hyundai Kia 86595-2T500 ,Fit Applications: Accent 2015-2017, Azera 2016-2017, Elantra 2017-2018, Equus 2016, Genesis 2016, Santa Fe 2016-2017, Sonata 2016-2017, Tucson 2016-2018, Kia Cadenza 2017, Forte 2014-2017, K900 2015-2016, Optima 2014-2016, Rio 2016 , Sedona 2015-2017, Soul 2016-2017, Sportage2017.
Other Names:Closing Plate Retainer Clip, Upper Cover Clip, Bumper Cover Retainer, Console Base Clip, Front Trim Clip, Lower Deflector Clip, Trunk Lid Trim Clip, Under-Body Shield Clip, Upper Cover Retainer, Latch Retainer, Lower Quarter Trim Clip, Side Cover Retainer, Side Extension Clip, Side Shield Retainer, Under Cover Retainer Clip, Wheelhouse Liner Clip, Air Inlet Clip, Front Shield Retainer, Clip.
Features
- Other Names: Bumper Cover Clip, Lower Cover Clip, Lower Shield Clip, Trunk Lid Trim Retainer, Cowl Grille Retainer, Lower Molding Retainer Clip, Sight Shield Clip, Under Cover Retainer, Closure Panel Retainer Clip, Guard Clip, Fender Liner Retainer, Rocker Molding Clip, Splash Guard Clip, Under Cover Clip, Air Inlet Duct Retainer Clip, Air Inlet Duct Clip, Sight Shield Retainer, Air Inlet Retainer
- Other Names:Closing Plate Retainer Clip, Upper Cover Clip, Bumper Cover Retainer, Console Base Clip, Front Trim Clip, Lower Deflector Clip, Trunk Lid Trim Clip, Under-Body Shield Clip, Upper Cover Retainer, Latch Retainer, Lower Quarter Trim Clip, Side Cover Retainer, Side Extension Clip, Side Shield Retainer, Under Cover Retainer Clip, Wheelhouse Liner Clip, Air Inlet Clip, Front Shield Retainer, Clip
- Head Diameter: 18mm Stem Length: 14mm Fits into 8mm Hole
- Replaces: Hyundai Kia 86595-2T500 ,Fit Applications: Accent 2015-2017, Azera 2016-2017, Elantra 2017-2018, Equus 2016, Genesis 2016, Santa Fe 2016-2017, Sonata 2016-2017, Tucson 2016-2018, Kia Cadenza 2017, Forte 2014-2017, K900 2015-2016, Optima 2014-2016, Rio 2016 , Sedona 2015-2017, Soul 2016-2017, Sportage2017
- Meet or Exceed OEM Speicfication. Direct Fitment
- See more on Amazon...
Brand: Rexka | Manufacturer: Yongtao
See On Amazon #15
30pcs Engine Splash Shield Guard Undertray Cover Screws Bolt Nut Clip, T30 Engine Undertray Screws Kit Compatible with Lincoln MKC Ford Focus Fusion Escape Explorer C-Max Transit Connect
Asin: B0C4T66B2K
10Pcs Red Nylon Under-Body Shield Nut Made From Nylon, Which Is Strong And Very Light In Weight, Meet Or Exceed Oem Specification..
Under Cover U Nuts Are Made From Quality Metal, Side Reinforced Nut, Anti-Wear, Strong, Robust And Vibration-Resistant..
10Pcs T30 Torx Head Screw Are Made From Quality Metal, Valance Screw Which Is Not Easy Break And Crack During Use, Which Is Anti-Corrosion And Anti-Wear..
Compatible With C-Max 2013-2018, Escape 2013-2019, Sierra 1982-1993, Fiesta 1989-1996, Fusion 2013-2018, F-150 2015-2018, Edge 2015-2018, Escort 1985-1990 1995-2001, Galaxie 1979-1983, Galaxy 2006-2015, Ka 1996-2009, Mondeo 1993-2007, Orion 1985-1993, Scorpio, Focus 2012-2018. Explorer 2016-2019, Transit Connect 2014-2019 Etc.
Features
- Includ: 10pcs T30 torx head screw, 10 PCS red Nylon sheathing lower nut, 10 PCS Under Cover U nuts, You will receive 30 pieces of Screws Bolt Nut Clip Kit in total.
- Compatible with C-Max 2013-2018, Escape 2013-2019, Sierra 1982-1993, Fiesta 1989-1996, Fusion 2013-2018, F-150 2015-2018, Edge 2015-2018, Escort 1985-1990 1995-2001, Galaxie 1979-1983, Galaxy 2006-2015, KA 1996-2009, Mondeo 1993-2007, Orion 1985-1993, Scorpio, Focus 2012-2018. Explorer 2016-2019, Transit Connect 2014-2019 etc
- 10pcs Red Nylon Under-Body Shield Nut Made from nylon, Which is strong and very light in weight, Meet or Exceed OEM Specification.
- 10pcs T30 torx head screw are made from quality metal, Valance screw which is not easy break and crack during use, which is anti-corrosion and anti-wear.
- Under cover U nuts are made from quality metal, Side Reinforced Nut, Anti-wear, strong, robust and vibration-resistant.
- See more on Amazon...
Brand: TOPCNOEM | Manufacturer: TOPCNOEM
Dimensions: 0.01 x 0.01 x 0.01 Inches
See On Amazon #16
Lower Engine Cover Bolt Pin Screws, Radiator Engine Access Cover Pin and Lower Cover Bolt Lower Engine Cover Pin Screw Compatible with Honda Accord Civic CR-V Acura 90674-TY2-A01 90105-TBA-A00
Asin: B0C2C9TXLC
【Compatible With】The Lower Engine Cover Pin Screws Are Compatible With Honda Accord 2014-2019, Compatible With Honda Civic 2017-2019, Honda Cr-V 2017-19, Acura 2014 Tlx, Rlx And Ilx(Oem No: 90674-Ty2-A01).
【Iclude】You Will Get 6 Engine Access Cover Pins For Replacement Part, Compatible With #90674-Ty2-A01, And 2 Lower Cover Bolts For Replacement Part, Compatible With #90105-Tba-A00 Please Don't Hesitate To Contact Us If There Is Any Question, We Will Reply Within 24 Hours And Help Solve The Problem..
【Compatible With】The Radiator Support Splash Shield Bolts Are Compatible With 2016-2021 Honda Civic And 2017-2010 Honda Cr-V.(Oem No: 90105-Tba-A00).
【Ideal Replacement】These Lower Engine Cover Bolt Pin And Screws Are Ideal Replacement For Original Equipment To Replace Your Broken Or Missing Retainers. Get Them And Say Goodbye To Engine Shield Dragging. Very Suitable For A Variety Of Automotive Uses。.
Features
- Material Made of quality aluminum alloy, nice reliability, strong and sturdy, stable characteristics, which can be applied for a long time,this hardware has been tested for precise fit.
- Ideal Replacement these lower engine cover bolt pin and screws are ideal replacement for original equipment to replace your broken or missing retainers. get them and say goodbye to engine shield dragging. very suitable for a variety of automotive uses
- Compatible With The lower engine cover pin screws are compatible with Honda Accord 2014-2019, compatible with Honda Civic 2017-2019, Honda CR-V 2017-19, Acura 2014 TLX, RLX and ILX(OEM No: 90674-TY2-A01)
- Compatible With The radiator support splash shield bolts are compatible with 2016-2021 Honda Civic and 2017-2010 Honda CR-V.(OEM No: 90105-TBA-A00)
- Iclude You will get 6 engine access cover pins for replacement part, compatible with #90674-TY2-A01, and 2 lower cover bolts for replacement part, compatible with #90105-TBA-A00 Please don't hesitate to contact us if there is any question, we will reply within 24 hours and help solve the problem.
- See more on Amazon...
Brand: stymart | Manufacturer: stymart
See On Amazon #17
Vomika Lower Engine Cover Pin Screws, Premium Radiator Engine Access Cover Pin Clips, Engine Splash Shield Bolt Screw Fastener Clip, Compatible with Honda Civic Accord CRV Acura - 14 Pieces
Asin: B0C8MBPH3P | Ean: 0614158502509 | UPC: 614158502509
【Durable And Reliable Material】 Our Lower Engine Cover Bolt Pin Screws Are Crafted From High-Quality Metal, Ensuring Stability, Durability, And Impeccable Strength. The Splash Shield Hardware Is Engineered With Precision And Care, Guaranteeing A Sturdy And Secure Fit..
【Wide Compatibility】 Enjoy Compatibility With Various Honda And Acura Models, Including Honda Accord 2014-2020, Honda Crv 2017-2020, Honda Civic 2017-2020, Acura Ilx, Rlx, And Tlx. Experience The Perfect Fit And Function For Your Vehicle..
【Easy Installation】 Say Goodbye To Complicated Installations! With Our User-Friendly Design, You Can Replace The Worn-Out Parts In No Time. Simply Use A Couple Of Tools And Follow The Included Instructions For A Seamless Installation Experience..
【Practical And Convenient Set】 This Set Includes 6 Engine Access Cover Pins, Compatible With #90674-Ty2-A01, 2 Lower Cover Bolts, Compatible With #90105-Tba-A00, And 6 Radiator Engine Access Cover Pin Clips. Everything You Need For A Hassle-Free Replacement..
Features
- Boost Your Car's Efficiency Experience superior performance with our premium lower engine cover pin screws set. These bolts and clips are the perfect replacement parts, designed to fit your car flawlessly. Trustworthy and reliable for long-lasting use.
- Practical and Convenient Set This set includes 6 engine access cover pins, compatible with #90674-TY2-A01, 2 lower cover bolts, compatible with #90105-TBA-A00, and 6 radiator engine access cover pin clips. Everything you need for a hassle-free replacement.
- Durable and Reliable Material Our lower engine cover bolt pin screws are crafted from high-quality metal, ensuring stability, durability, and impeccable strength. The splash shield hardware is engineered with precision and care, guaranteeing a sturdy and secure fit.
- Easy Installation Say goodbye to complicated installations! With our user-friendly design, you can replace the worn-out parts in no time. Simply use a couple of tools and follow the included instructions for a seamless installation experience.
- Wide Compatibility Enjoy compatibility with various Honda and Acura models, including Honda Accord 2014-2020, Honda CRV 2017-2020, Honda Civic 2017-2020, Acura ILX, RLX, and TLX. Experience the perfect fit and function for your vehicle.
- See more on Amazon...
Brand: Vomika | Manufacturer: Vomika
Dimensions: 0.39 x 5.90 x 4.10 Inches
See On Amazon #18
8Pcs Engine Lower Cover Pin Screws, 6PCS Radiator Access Cilps 90674-TY2-A01 and 2PCS Lower Engine Cover Bolt 90105-TBA-A00 Compatible with Honda Civic Accord CRV
Asin: B0C455MBX3
[Scope Of Application]: The Radiator Access Cilps And Bolts Are Compatible With Honda Civic 2017-2020, Crv 2017-2020, Accord 2014-2020. Please Check The Size Of The Corresponding Component Model Of Your Car Before Buying To Avoid The Wrong Purchase..
[Easy To Use]: Use Bolts To Fix The Oil Pan Drain Plug Access Cover To Its Installation Point, Will Not Easily Fall Off..
[Lower Engine Shield Cover Bolt Kit Function]:The Engine Cover Screws Are Used For Undercarriage Skid Plate Or Oil Pan Slid Plate, Promptly Replace Old Or Damaged Screws And Bolts..
[Pack List And Oem]: Package Include 6 Pieces Of Lower Engine Cover Pin Screws 90674-Ty2-A01 And 2 Pieces Of Radiator Support Splash Guard Bolts 90105-Tba-A00..
Features
- [High Quality Material]: The Engine Access Cover Pin adopts high quality Aluminum Alloy, rust proof, corrosion resistance, not easy to break or deformation, stable performance, good reliability, durable.
- [Pack list and OEM]: Package include 6 pieces of lower engine cover pin screws 90674-TY2-A01 and 2 pieces of radiator support splash guard bolts 90105-TBA-A00.
- [Scope of application]: The Radiator Access Cilps and bolts are compatible with Honda Civic 2017-2020, CRV 2017-2020, Accord 2014-2020. Please check the size of the corresponding component model of your car before buying to avoid the wrong purchase.
- [Lower engine shield cover bolt kit Function]:The engine cover screws are used for undercarriage skid plate or oil pan slid plate, promptly replace old or damaged screws and bolts.
- [Easy to use]: Use bolts to fix the oil pan drain plug access cover to its installation point, will not easily fall off.
- See more on Amazon...
Brand: Middrivr | Manufacturer: Middrivr
Dimensions: 0.43 x 0.79 x 0.63 Inches
See On Amazon #19
10pcs Screw Bolt Retainer Fender Liner Under Cover - Screw Truss Head Bumper Splash Guard Fender Liner Splash Shield Bumper Cover Self Tapping Compatible with N90974701 Volkswagon,Audi,Porsche
Asin: B09TB951PB | Model: Cekaso-Clips | PartNumber: Cekaso-Clips
Function --- Used For Fender Liner, Bumper Cover, Air Duct, Splash Shield, Plastic Trim, Etc..
Serve --- We Serve You 24 Hours A Day. After You Receive The Product, If There Is Any Problem, Please Send Us An Email In Time.
Specification --- 10 Pcs Stainless Steel Hex Head Screws, Top Head Diameter:14Mm, Screw Length:18Mm, Screw Diameter:7Mm.
Chemical Resistance --- Wide Variety Of Chemicals Resistance, Gasoline, Engine Oil, Anti-Freeze Fluid, Windshield Washer Fluid, Lubrication Oil Etc.Heat Resistant Suitable For High-Temperature Applications, Eco-Friendly, Non-Pollution In Treatment Process.
Features
- Material --- High Quality Steel having excellent toughness,Excellent workmanship are necessary conditions for product reliability, stability and long-term use, We check the products again before shipping for you
- Chemical Resistance --- Wide variety of chemicals resistance, Gasoline, Engine Oil, Anti-freeze fluid, Windshield Washer Fluid, Lubrication Oil etc.Heat Resistant Suitable for high-temperature applications, Eco-friendly, Non-Pollution in Treatment Process
- Function --- Used for Fender liner, bumper cover, air duct, splash shield, plastic trim, etc.
- Specification --- 10 PCS Stainless steel Hex Head Screws, Top head diameter:14mm, Screw length:18mm, Screw diameter:7mm
- Serve --- We serve you 24 hours a day. After you receive the product, if there is any problem, please send us an email in time
- See more on Amazon...
Brand: Cekaso | Manufacturer: Cekaso
See On Amazon #20
35 PCS Engine Under Cover Splash Shield Guard Body Bolts, Splash Shield Guard Retainer Bumper Fender Liner Fastener Rivet Clips and Extruded U-Nuts Kit
Asin: B0BTYQM88S
[Easy To Use] The Installation Is Very Simple, Just Fix It On The Correct Installation Point..
[Compatibility] Bumper Clips Is Compatible With 2003-2008 Infiniti G35 Sedan, 2003-2007 Infiniti G35 Coupe, 2008-2014 Infiniti G37 And G37x, 2003-2008 Infiniti Fx35 And Fx45, 2008-2012 Infiniti Ex35, 2009-2014 Nissan 370Z, 2003-2009 Nissan 350Z..
[Function] These Bumper Retainer Clips Are Widely Used For The Replacement Of Radiator Fork Trim Panel Door Trim Panel Bumper Car Fender Horn Side Skirt Grille Wheel Well Intake Engine Hood Fender And Fender Guard Retainer Rivet Clips..
[Material] The Body Bolt Of The Splash Shield Of The Engine Lower Cover Is Made Of High Hardness Steel Or High-Quality Nylon Material, Which Is Very Strong, Rust-Proof And Anti-Corrosion, And Will Not Break Easily..
Features
- [Package Includes] The car clip kit includes 10 extruded U-nuts, 15 body bolts with built-in fender washers, and 10 plastic push clips.
- [Material] The body bolt of the splash shield of the engine lower cover is made of high hardness steel or high-quality nylon material, which is very strong, rust-proof and anti-corrosion, and will not break easily.
- [Easy to Use] The installation is very simple, just fix it on the correct installation point.
- [Function] These bumper retainer clips are widely used for the replacement of radiator fork trim panel door trim panel bumper car fender horn side skirt grille wheel well intake engine hood fender and fender guard retainer rivet clips.
- [Compatibility] Bumper clips is compatible with 2003-2008 Infiniti G35 sedan, 2003-2007 Infiniti G35 Coupe, 2008-2014 Infiniti G37 and G37X, 2003-2008 Infiniti FX35 and FX45, 2008-2012 Infiniti EX35, 2009-2014 Nissan 370Z, 2003-2009 Nissan 350Z.
- See more on Amazon...
Brand: YAKEFLY | Manufacturer: YAKEFLY
Dimensions: 0.39 x 0.39 x 0.39 Inches
See On Amazon
Looking For Something Else?
Search