Generic CNC milling Blade, AOMT, AOMT184804PEER-M MP6130, 30pcs/lot (Carbon Steel, Alloy Steel Processing)
Asin: B0CYCMX9TL
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Features
- CNC milling blade, AOMT, AOMT184804PEER-M MP6130, 30pcs/lot (carbon steel, alloy steel processing)
- See more on Amazon...
Brand: Generic | Manufacturer: Shang Hai
See On Amazon Similar To Generic CNC milling Blade AOMT
#1
Genmitsu 40pcs End Mills CNC Router Bits, 1/8" Shank CNC Cutter Milling Carving Bit Set Including 2-Flute Flat Nose & Ball Nose, Nano Blue Coat & Titanium Coat, MC40A
Asin: B08CD99PWL | Model: MBS-001 | PartNumber: MBS-001 | Ean: 4897093844385
Two End Mill Sets -- Shank Diameter: 3.175Mm, Cutting Diameter: 0.8 - 3.0Mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.5/3.0Mm), Cutting Length: 17Mm, Overall Length: 38Mm, With Nano Blue And Titanium Coating..
Wide Compatibility: The Mc40a End Mills Are Compatible With Most Desktop Cnc Machines, Such As The Genmitsu 3018 Series, As Well As Other Industrial Cnc Machines. Just Make Sure You Select The Correct-Sized Collet For Your Device.
Applicable Materials: Widely Used In Various Materials Including Plastics, Aluminum, Circuit Board, Wood, As Well As Other Precision Parts Processing..
2-Flute Spiral Flat Nose & Ball Nose End Mills -- Shank Diameter: 3.175Mm, Cutting Diameter: 3.175Mm, Cutting Length: 17Mm, Overall Length: 38Mm..
Features
- High Quality: The Genmitsu end mills are made of ultra-fine 0.2 m tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating /Titanium Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
- 2-Flute Spiral Flat Nose & Ball Nose End Mills -- Shank Diameter: 3.175mm, Cutting Diameter: 3.175mm, Cutting Length: 17mm, Overall Length: 38mm.
- Two End Mill Sets -- Shank Diameter: 3.175mm, Cutting Diameter: 0.8 - 3.0mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.5/3.0mm), Cutting Length: 17mm, Overall Length: 38mm, with Nano blue and Titanium coating.
- Applicable Materials: Widely used in various materials including plastics, aluminum, circuit board, wood, as well as other precision parts processing.
- Wide Compatibility: The MC40A end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device
- See more on Amazon...
Brand: Genmitsu | Manufacturer: Genmitsu
Dimensions: 0.04 x 1.50 x 3.18 inches
See On Amazon #2
LAKIX 1/8" Shank End Mills CNC Router Bits, 40pcs, CNC Cutter Milling Carving Bit Set Including 2-Flute Flat Nose & Ball Nose End Mill, Nano Blue Coat & Titanium Coat CNC Bits,
Asin: B0CC5CMKPP
➤The Coat End Mill: Shank Diameter: 3.175Mmm(1/8Inch), Cutting Diameter: 0.8 ~ 3.0Mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.5/3.0Mm), Cutting Length: 17Mm, Overall Length: 38Mm, With Nano Blue And Titanium Yellow Coating..
➤Applicable Materials And Uses:These Engraving Bit Can Be Used In A Wide Range Of Materials Including Solid Wood, Wood Paneling, Bakelite, Carbon Fiber, Pcb Boards, And Plastics, Etc. And The Bits Measure 3.178Mm (1/8Inch) And Are Compatible With Most Benchtop Cnc Machines And Engraving Machines Such As The 3018 Series As Well As Other Industrial Cnc Machines..
➤Excellent Performance: The Milling Router Bits As A Whole Uses Tungsten Steel For High-Precision Processing, Smooth Chip Removal, With High Precision, Durability, Not Easy To Wear, Long Service Life And So On, They Will Be A Nice Carving Tool，Greatly Improving Your Engraving Work Efficiency..
➤The 2-Flute Spiral Flat Nose & Ball Nose End Mills: Shank Diameter: 3.175Mm(1/8Inch), Cutting Diameter: 3.175Mm, Cutting Length: 17Mm, Overall Length: 38Mm.(Note: The Ball Nose End Mills's Cutting Diameter Is 2Mm).
Features
- What you will get 1 set 2-Flute Flat Nose Sprial Bit(3.175x17x38mm), 1 set 2-Flute Ball Nose Sprial Bit(3.175x2x17x38mm), 1 set Titanium Coat End Mill(0.8-3.0mm), 1 set Nano Blue Coat End Mill 0.8-3.0mm totally 40pcs CNC Router Bits
- The 2-Flute Spiral Flat Nose & Ball Nose End Mills: Shank Diameter: 3.175mm(1/8inch), Cutting Diameter: 3.175mm, Cutting Length: 17mm, Overall Length: 38mm.(Note: The Ball Nose End Mills's cutting diameter is 2mm)
- The Coat End Mill: Shank Diameter: 3.175mmm(1/8inch), Cutting Diameter: 0.8 ~ 3.0mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.5/3.0mm), Cutting Length: 17mm, Overall Length: 38mm, with Nano blue and Titanium yellow coating.
- Excellent Performance: The milling router bits as a whole uses tungsten steel for high-precision processing, smooth chip removal, with high precision, durability, not easy to wear, long service life and so on, they will be a nice carving Tool greatly improving your engraving work efficiency.
- Applicable materials and uses:These engraving Bit can be used in a wide range of materials including solid wood, wood paneling, bakelite, carbon fiber, PCB boards, and plastics, etc. And the bits measure 3.178mm (1/8inch) and are compatible with most benchtop CNC machines and engraving machines such as the 3018 series as well as other industrial CNC machines.
- See more on Amazon...
Brand: LAKIX | Manufacturer: LAKIX
Dimensions: 0.12 x 1.50 x 0.12 inches
See On Amazon #3
EANOSIC 5PCS Spiral Router Bits Up/Down Cut Compression Bit 1/4 inch Cutting Diameter with Nano Blue Coated, 1/4 inch Shank Solid Carbide CNC End Mill for Wood Carving Engraver Milling Cutters
Asin: B0BNWYW2KQ | Model: E212 | PartNumber: E212
Spiral Bits Used For Side Milling, End Milling, Finish Machining, Etc. End Mill Bits Can Smoothly Upcut And Downcut Groove And Slots, Mortises, Cycles And Dados With Clean Edge And Bottom, Better Than Straight Bits..
The Router Bit Suit For Cnc Router And Any Plunge Routers With 1/4" Collet..
The Cnc End Mill Router Bits Apply To Various Wood: Such As Plywood, Oak, Mdf, And Any Hardwood Working And Long Service Life For Sharp. And Also For Carbon Steel, Soft Alloy Steel, Tool Steel, Cast Iron, Aluminum Alloy..
Solid Carbide & Blue Nano Naco Coated: The Up And Down Cut Spiral Router Bit Is Made Of Solid Carbide. And Nano Blue Coating With High Hardness And Heat Resistance Enables The Tool's Cutting Edge To Retain Crucial Sharpness And Lubricity. This Provides Longevity And Produces Cutting Results Of The Highest Quality. Clean Surface, Neat, No Glitches..
Features
- 5PCS UP & DOWN cut spiral router bit with 1/4 inch shank and 1/4 inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length
- Solid Carbide & Blue Nano nACo Coated: The up and down cut spiral router bit is made of solid carbide. And Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality. Clean surface, neat, no glitches.
- Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut and downcut groove and slots, mortises, cycles and dados with clean edge and bottom, better than straight bits.
- The CNC End Mill Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp. And also for carbon steel, soft alloy steel, tool steel, cast iron, aluminum alloy.
- The router bit suit for CNC router and any plunge routers with 1/4 collet.
- See more on Amazon...
Brand: EANOSIC | Manufacturer: EANOSIC
See On Amazon #4
EANOSIC 5PCS Downcut Spiral Router Bits 1/4 inch Shank, 1/4 inch Cutting Diameter Solid Carbide with Nano Blue Coating CNC Router Bits End Mill for Wood Cut, Carving
Asin: B0BKZVJ55R | Model: E208 | PartNumber: E208
Cnc Spiral Bits Used For Side Milling, End Milling, Finish Machining, Etc. End Mill Bits Can Smoothly Downcut Groove And Slots, Mortises, Cycles And Dados With Clean Edge And Top, Better Than Straight Bits..
The Router Bit Suit For Cnc Router And Any Plunge Routers With 1/4" Collet..
The Cnc End Mill Router Bits Apply To Various Wood: Such As Plywood, Oak, Mdf, And Any Hardwood Working And Long Service Life For Sharp. And Also For Carbon Steel, Soft Alloy Steel, Tool Steel, Cast Iron, Aluminum Alloy..
Solid Carbide & Blue Nano Naco Coated: The Down-Cut Spiral Router Bit Is Made Of Solid Carbide. And Nano Blue Coating With High Hardness And Heat Resistance Enables The Tool's Cutting Edge To Retain Crucial Sharpness And Lubricity. This Provides Longevity And Produces Cutting Results Of The Highest Quality. Clean Surface, Neat, No Glitches. Up To 2.5X Longer Life Compared To Uncoated Bits..
Features
- 5PCS Downcut spiral router bit with 1/4 inch shank and 1/4 inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length
- Solid Carbide & Blue Nano nACo Coated: The down-cut spiral router bit is made of solid carbide. And Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality. Clean surface, neat, no glitches. Up to 2.5X longer life compared to uncoated bits.
- CNC Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly downcut groove and slots, mortises, cycles and dados with clean edge and top, better than straight bits.
- The CNC End Mill Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp. And also for carbon steel, soft alloy steel, tool steel, cast iron, aluminum alloy.
- The router bit suit for CNC router and any plunge routers with 1/4 collet.
- See more on Amazon...
Brand: EANOSIC | Manufacturer: EANOSIC
See On Amazon #5
40Pcs End Mills CNC Router Bits Set 1/8" Shank, Mcwdoit CNC Machine Cutting Milling Tool Engraving Cutter Including Flat Nose/Ball Nose End Mill, Nano Blue Coat/Titanium Coat 2 Flute CNC Router Bits
Asin: B07W5N72D4 | Model: HT001 | PartNumber: HT001 | Ean: 0725756324292 | UPC: 725756324292
【Advantage】Carbide Rods And Tungsten Steel Rods With High Hardness, High Wear Resistance, Clean Surface, Neat, No Glitches..
【Cnc Router Bits: Parameter】Overall Length（Oal）: 38Mm; Shank Diameter（Sd）: 3.175Mm.
【Wide Application】Pcb, Smt, Cnc, Mold, Plastic Fiber, Carbon Fiber, Hard Wood, Printed Circuit Board, Aluminum And Other Precision Parts Processing..
【Cost-Effective Kit】4 Type Each 10Pcs, Ball Nose Bit 2-Flute, Flat Nose End Mill 2-Flute, Nano Blue Coat And Titanium Coat Cnc Router Bits, Satisfying Your Different Needs..
Features
- High Quality CNC Bits Mcwdoit 1/8 end mills are made of ultra-fine grain carbide material (tungsten steel), with great cutting and milling performance.
- Cost-Effective Kit 4 Type Each 10Pcs, Ball Nose Bit 2-Flute, Flat Nose End Mill 2-Flute, Nano Blue Coat and Titanium Coat CNC Router Bits, satisfying your different needs.
- Advantage Carbide rods and tungsten steel rods with high hardness, high wear resistance, clean surface, neat, no glitches.
- Wide Application PCB, SMT, CNC, Mold, plastic fiber, carbon fiber, hard wood, printed circuit board, aluminum and other precision parts processing.
- CNC Router Bits: Parameter Overall Length OAL : 38mm; Shank Diameter SD : 3.175mm
- See more on Amazon...
Brand: mcwdoit | Manufacturer: WAM Direct
Dimensions: 4.21 x 5.35 x 1.30 inches | Weight: 0.38 Pounds
See On Amazon #6
3.15 Inch Face Milling Cutter Aluminum KM12 80MM CNC End Milling Cutter Holder + R8-FMB22 Shank Face Shell Mill Arbor + 5pcs SEHT1204 Carbide Inserts + 8mm Hexagon Wrench + T20 Wrench CNC Machine Tool
Asin: B08MYJDP7Y | Model: AL KM12 80-22 | PartNumber: AL KM12 80-22
Stable Performance Of Gold Plating Process: The Cutter Head Surface Adopts New Thin Coating Gold Plating Process, Which Has Good Oxidation Resistance, High Temperature Resistance And More Durable.
Tight Seam, Strong Compression Force: Screw Offset Fastening Design, So That The Blade Position Slot And Blade Closely Fit, Processing Is Not Easy To Shake, Reduce Damage To The Machine Tool.
Insert The Tooth Sleeve To Avoid Sliding Wire: The Stainless Steel Tooth Sleeve Is Inserted In The Screw Tooth Position Of The Cutter Head, Which Can Effectively Prevent The Thread Sliding Problem Of The Cutter Head Screw Tooth.
High Quality Material Selection And Load Reduction: It Adopts Aviation Aluminum Alloy Raw Material, Which Is Light And Stable, Effectively Reduces The Spindle Load, Greatly Delays The Service Life Of Milling Machine, And Can Process Aluminum Alloy Mold Quickly.
Features
- Precision Design And Accurate Tool Position: The Precision Design Of Blade Position Ensures The Accuracy Of The Blade Position. After The Blade Is Installed, It Is Flat And Consistent With The Cutter Head, So As To Avoid Uneven Force On The Blade During Processing, And Easily Solve The Chatter Of Spring Knife
- High Quality Material Selection And Load Reduction: It Adopts Aviation Aluminum Alloy Raw Material, Which Is Light And Stable, Effectively Reduces The Spindle Load, Greatly Delays The Service Life Of Milling Machine, And Can Process Aluminum Alloy Mold Quickly
- Stable Performance Of Gold Plating Process: The Cutter Head Surface Adopts New Thin Coating Gold Plating Process, Which Has Good Oxidation Resistance, High Temperature Resistance And More Durable
- Insert The Tooth Sleeve To Avoid Sliding Wire: The Stainless Steel Tooth Sleeve Is Inserted In The Screw Tooth Position Of The Cutter Head, Which Can Effectively Prevent The Thread Sliding Problem Of The Cutter Head Screw Tooth
- Tight Seam, Strong Compression Force: Screw Offset Fastening Design, So That The Blade Position Slot And Blade Closely Fit, Processing Is Not Easy To Shake, Reduce Damage To The Machine Tool
- See more on Amazon...
Brand: LingGan | Manufacturer: LingGan
Dimensions: 3.15 x 6.54 x 3.15 inches | Weight: 2.60 pounds
See On Amazon #7
HQMaster Router Bits Straight End Mill Milling Cutter Endmill 2 Flutes CNC Cutting Carbide Tungsten Steel Straight Slot Bit, Pack of 10 (3.175 x 17 x 38.5mm)
Asin: B078MJCZFK | Model: HQ-5072 | PartNumber: HQ-5072
Brand: HQMaster | Manufacturer: HQMaster
See On Amazon #8
ASNOMY 20pcs End Mills CNC Spiral Router Bits, 1/8" Shank CNC Cutter Milling Carving Bit Set, Nano Blue Coat CNC End Mill Bits, Cutting Dia.1/32"-1/8"Inch
Asin: B0BNBM31DX
【Widely Application】This Cnc Router Bit Can Be Used For Pcb, Smt, Cnc, Mold, Plastic Fiber, Carbon Fiber, Hard Wood, Printed Circuit Board, And Other Precision Parts Processing..
【Satisfaction】Asnomy Aims To Provide High-Grade Products And Customer Service To All Customers. Any Problems, Just Contact Us And Our After-Sale Team Will Solve Your Problems Asap..
【20Pcs End Mills Set】Including 20Pcs End Mill Bits, The Cutting Edge Of End Mill Set Is Sharp, Not Easy To Break And Can Maintain For A Long Time. You Can Use It To Improve Your Work Efficiency And Save Your Cost..
【Size】Cutting Edge Dia.1/32" - 1/8"Inch (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.4/3.0/3.175Mm), Shank:1/8"(3.175Mm)..
Features
- Top Quality Made of ultra-fine carbide material, Industrial Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity.
- Size Cutting Edge Dia.1/32 - 1/8Inch (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.4/3.0/3.175mm), Shank:1/8(3.175mm).
- Widely Application This CNC Router bit can be used for PCB, SMT, CNC, Mold, plastic fiber, carbon fiber, hard wood, printed circuit board, and other precision parts processing.
- 20pcs End Mills set Including 20pcs end mill bits, The cutting edge of end mill set is sharp, not easy to break and can maintain for a long time. You can use it to improve your work efficiency and save your cost.
- Satisfaction ASNOMY aims to provide high-grade products and customer service to all customers. Any problems, just contact us and our after-sale team will solve your problems ASAP.
- See more on Amazon...
Brand: ASNOMY | Manufacturer: ASNOMY
See On Amazon #9
4-Edge 1/8 Solid Carbide milling Cutter Cutting Diameter Solid Carbide CNC milling Head end Mill 5 pcs
Asin: B0CPF5PVL6
【List】5 X 1/8-Inch 4-Edge Carbide Square Mill Cutters.
【After-Sales】If You Have Any Questions, Please Contact Us And We Will Reply To You In Time. Your Satisfaction Is Our Greatest Pursuit.
【Quality】Industrial Quality Control To Ensure Optimal Performance.
【High Efficiency】The Drill Bit Has Sharp Edges, Capable Of Carving Quickly, High Efficiency, Durable, High Precision And Not Easy To Break. Smoke-Free And Burr-Free Processing.
Features
- Performance Solid carbide spiral drill bits are professional-grade graded, and industrial-grade quality control ensures optimal performance.
- High Efficiency The drill bit has sharp edges, capable of carving quickly, high efficiency, durable, high precision and not easy to break. Smoke-free and burr-free processing
- List 5 x 1/8-inch 4-edge carbide square mill cutters
- Quality Industrial quality control to ensure optimal performance
- After-Sales If you have any questions, please contact us and we will reply to you in time. Your satisfaction is our greatest pursuit
- See more on Amazon...
Brand: NZ | Manufacturer: NZ
See On Amazon #10
HOZLY Woodwork Milling Cutter ,DLC Coating ,UP & Down Cut 2 Flutes Spiral Carbide Milling Tool CNC Router Compression Wood End Mill Cutter Bits,6mm Shank ,6mm Cutting Dia ,22mm CEL Pack of 5
Asin: B0B5KXBWN9 | Model: 0631384621354 | PartNumber: 0631384621354 | Ean: 0631384621354 | UPC: 631384621354
Spiral Bits Used For Side Milling, End Milling, Finish Machining, Etc. End Mill Bits Can Smoothly Upcut And Downcut Groove And Slots, Mortises, Cycles And Dados With Clean Edge And Bottom, Better Than Straight Bits..
High Processing Efficiency: The Edge Of End Mill Bits Is Hard And Sharp, Process The Heat Treatment Materials Under 32° With High Speed, Reduce Changing Times And Improve The Production Efficiency..
The Cnc End Mill Router Bits Apply To Various Wood: Such As Plywood, Oak, Mdf, And Any Hardwood Working And Long Service Life For Sharp..
Solid Carbide And Dlc Coating: The Up And Down Cut Spiral Router Bit Is Made Of Solid Carbide. And Dlc Coating With High Hardness And Heat Resistance Enables The Tool's Cutting Edge To Retain Crucial Sharpness And Lubricity. This Provides Longevity And Produces Cutting Results Of The Highest Quality. Clean Surface, Neat, No Glitches..
Features
- 5PCS UP & DOWN cut spiral router bit with 6mm shank and 6mm cutting diameter, 22mm cutting length, 50mm for total length
- SOLID CARBIDE AND DLC Coating: The up and down cut spiral router bit is made of solid carbide. And DLC Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality. Clean surface, neat, no glitches.
- Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut and downcut groove and slots, mortises, cycles and dados with clean edge and bottom, better than straight bits.
- The CNC End Mill Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
- HIGH PROCESSING EFFICIENCY: The edge of end mill bits is HARD and SHARP, process the heat treatment materials under 32 with high speed, reduce changing times and improve the production efficiency.
- See more on Amazon...
Brand: HOZLY | Manufacturer: HOZLY
See On Amazon #11
40pcs End Mills CNC Router Bits, 1/8 inch(3.175mm) Shank CNC Milling Carving Bit Set Including 2-Flute Flat & Ball Nose Spiral Bits, Nano Blue Coat & Titanium Coat End Mill, Suitable for ER 11 Collet
Asin: B0C6PQXZ6R | Model: SKCM40 | PartNumber: SKCM40
【Dimensions】Cnc Router Bits Cutter: Length: 38Mm, Shank Diameter: 3.175Mm (1/8"). Flat & Ball End Nose Spiral Bit: Cutting Diameter: 3.175Mm, Cutting Length: 17Mm. Nano Blue And Titanium-Coated: Cutting Diameter: 0.8/1/1.2/1.4/1.6/1.8/2.0/2.2/2.4/3.0Mm. Plastic Case (54 X 51 X 9Mm) For Better Protection.
【Wide Application】Widely Used In Various Materials Such As Plastics, Aluminum, Mdf, Acrylic, And Wood, And More. They Are Compatible With Most Desktop Cnc Machines, Such As The Cnc 3018 Series, 4540, 3020 Plus As Well As Other Cnc Machines.
【High Efficiency】Our Tungsten Steel End Mills Are Sharp, Ensuring Fast Cutting, Low Noise, And Easy Debris Removal. They Save Time On Tool Changes, Significantly Improving Work Efficiency.
【Perfect Combination】Get A Set Of 40 Milling Bits, Including 10 Flat-End And 10 Ball-End Nose Spiral Bits, As Well As 10 Nano Blue-Coated And 10 Titanium-Coated End Mill. These Versatile Sizes Cover Most Mechanical Manufacturing Needs.
Features
- High Quality Our tungsten steel end mills are made for high durability, hardness, wear resistance, and breakage prevention. They have excellent heat resistance and a smooth surface for precision without burrs
- Perfect Combination Get a set of 40 milling bits, including 10 flat-end and 10 ball-end nose spiral bits, as well as 10 nano blue-coated and 10 titanium-coated end mill. These versatile sizes cover most mechanical manufacturing needs
- Dimensions CNC router bits cutter: Length: 38mm, Shank diameter: 3.175mm (1/8). Flat & ball end nose spiral bit: Cutting diameter: 3.175mm, Cutting length: 17mm. Nano blue and titanium-coated: Cutting diameter: 0.8/1/1.2/1.4/1.6/1.8/2.0/2.2/2.4/3.0mm. Plastic case (54 x 51 x 9mm) for better protection
- High Efficiency Our tungsten steel end mills are sharp, ensuring fast cutting, low noise, and easy debris removal. They save time on tool changes, significantly improving work efficiency
- Wide Application Widely used in various materials such as plastics, aluminum, mdf, acrylic, and wood, and more. They are compatible with most desktop CNC machines, such as the CNC 3018 Series, 4540, 3020 PLUS as well as other CNC machines
- See more on Amazon...
Brand: iklestar | Manufacturer: iklestar
See On Amazon #12
VEVOR 40pcs End Mills CNC Router Bits, 1/8" Shank, CNC Cutter Milling Carving Bit Set, Including 2-Flute Flat Nose & Ball Nose End Mill, Nano Blue Coat & Titanium Coat CNC Bits, for Milling Machine
Asin: B0C9ZG75XQ | Model: 40PCSCNC | PartNumber: 40PCSCNC | Ean: 0840349927411 | UPC: 840349927411
Efficient Chip Removal: The 2-Flute Spiral Drill Bits Are Specifically Designed For Carving And Sculpting Curved Surfaces. Precision-Ground Spiral Flutes Facilitate Quick Chip Removal And Avoid Tool Sticking, Enhancing Your Work Efficiency..
High Compatibility: The Cnc Mill Kit Is Compatible With Most Engraving Machines, Precision Carving Machines, Cnc Machines, And Any Machine Equipped With A 1/8-Inch Collet..
Wear-Resistant Coatings: The Cnc Router Bit End Mill Features A High Hardness And Heat-Resistant Nano Blue Coating And Titanium Coating To Extend Service Life And Deliver Optimal Cutting Results. Ideal For Processing Materials Such As Carbon Steel, Soft Alloy Steel, Tool Steel, Cast Iron, And Aluminum Alloys..
Durable & Stable: Each Cnc Milling Bit Is Forged From Tungsten Steel Alloy, Ensuring Sharp Edges And A Smooth, Burr-Free Surface. They Exhibit High Wear Resistance And Durability, Providing You With Stable Milling Performance..
Features
- Cost-Effective Kit: The 1/8-inch shank CNC router bits set includes a combination of four types of cutting heads: 10 x spiral flat nose end mills, 10 x spiral ball nose end mills, 10 x nano blue coating end mills, and 10 x titanium coating end mills.
- Durable & Stable: Each CNC milling bit is forged from tungsten steel alloy, ensuring sharp edges and a smooth, burr-free surface. They exhibit high wear resistance and durability, providing you with stable milling performance.
- Efficient Chip Removal: The 2-flute spiral drill bits are specifically designed for carving and sculpting curved surfaces. Precision-ground spiral flutes facilitate quick chip removal and avoid tool sticking, enhancing your work efficiency.
- Wear-Resistant Coatings: The CNC router bit end mill features a high hardness and heat-resistant nano blue coating and titanium coating to extend service life and deliver optimal cutting results. Ideal for processing materials such as carbon steel, soft alloy steel, tool steel, cast iron, and aluminum alloys.
- High Compatibility: The CNC mill kit is compatible with most engraving machines, precision carving machines, CNC machines, and any machine equipped with a 1/8-inch collet.
- See more on Amazon...
Brand: VEVOR | Manufacturer: VEVOR
See On Amazon #13
5 Pcs 3mm CNC Carbide End Mill Set, 4 Fultes Milling Cutter,Tungsten End Milling Bits Tool
Asin: B07X1W8SGP | Ean: 8431271485333
Detail Design: High-Precision Cutting Edge With Suitable Negative Forefoot Design, Taking Into Account The Strength And Sharpness Of The Cutting Edge. At The Same Time, The Large Core Diameter Is Used To Enhance The Rigidity Of The Tool And Make The Cutting And Chip Removal Stable..
Package Included：5 X 4 Flutes End Mill Cutter.
Wide Application Square Nose End Mills：It Can Be Used On Many Fields, Such As Metal Processing, Cnc Machining And Engineering Using. Large Chip Flute Design For Smoother Chip Removal, Making The Workpiece Smoother And Brighter..
Material: Tungsten Carbide Has The Advantages Of High Hardness, Wear Resistance, Toughness And Corrosion Resistance. It Also Has Stronger Heat Resistance Than Hss, So It Can Maintain Hardness Even At High Temperature. Tungsten Steel Is Mainly Composed Of Tungsten Carbide And Cobalt, Accounting For 99% Of All Components. Tungsten Steel Is Also Called Cemented Carbide And Is Considered To Be The Teeth Of Modern Industry..
Features
- 3mm Carbide End Mill Set: This end mill set includes 5 pieces 3mm End Mill the milling cutter kit contains the number to meet the demand.
- Material: Tungsten Carbide has the advantages of high hardness, wear resistance, toughness and corrosion resistance. It also has stronger heat resistance than HSS, so it can maintain hardness even at high temperature. Tungsten steel is mainly composed of tungsten carbide and cobalt, accounting for 99% of all components. Tungsten steel is also called cemented carbide and is considered to be the teeth of modern industry.
- Detail design: High-precision cutting edge with suitable negative forefoot design, taking into account the strength and sharpness of the cutting edge. At the same time, the large core diameter is used to enhance the rigidity of the tool and make the cutting and chip removal stable.
- Wide Application square nose end mills It can be used on many fields, such as metal processing, CNC machining and engineering using. Large chip flute design for smoother chip removal, making the workpiece smoother and brighter.
- Package Included 5 x 4 Flutes End Mill Cutter
- See more on Amazon...
Brand: Home of quality tools | Manufacturer: Home of quality tools
See On Amazon #14
Generic Drag Knife for CNC spindle/router with 1/4"" collet
Asin: B0D153T5G6 | Model: drag knife | PartNumber: drag knife
Easy Access To Blade.
Fully Enclosed Blade For Safety.
Made In Usa.
Not Expensive Like Others.
Sealed Bearings.
Features
- Easy to operate
- Sealed bearings
- Easy access to blade
- Not expensive like others
- Fully enclosed blade for safety
- Made in USA
- See more on Amazon...
Brand: Generic | Manufacturer: Generic
See On Amazon #15
Nxtop 10Pcs 2mm Carbide End Mill Engraving Milling Cutter CNC Router Bits for PCB Machine, 1/8" Shank
Asin: B07VB3T88V | Model: XD1 | PartNumber: XD1 | Ean: 0745672480513 | UPC: 745672480513
Features: High Hardness, High Wear Resistance, High Strength. Have Sufficient Bending Strength And Wear Resistance..
Application: Can Engrave Pcb, Cnc, Circuit Boards, Metal, Plastics, Wood, Smt, Fiber Glass, Carbon And Environmental Board..
Characteristics: Sharp Cutting Edge, Milling, Hole And Plate Edge, Surface Clean, Neat, No Glitches..
Material: Use Of Ultra-Fine Grain Carbide Material With Good Milling And Cutting Performance, Ensure High Work Efficiency..
Features
- Standrd: Cutting edge diameter: 1mm / 0.039"; Shank diameter: 3.175mm / 1/8"; Cutting edge length: 7mm / 0.28"
- Material: Use of ultra-fine grain carbide material with good milling and cutting performance, ensure high work efficiency.
- Features: High hardness, high wear resistance, high strength. Have sufficient bending strength and wear resistance.
- Characteristics: Sharp cutting edge, milling, hole and plate edge, surface clean, neat, no glitches.
- Application: Can engrave PCB, CNC, Circuit boards, Metal, Plastics, Wood, SMT, Fiber glass, Carbon and environmental board.
- See more on Amazon...
Brand: Nxtop | Manufacturer: Nxtop
See On Amazon #16
LUOCUT Radius Corner Rounding Cutter End Mill 12mm CNC Carbide Tools R0.3 R1 R2 R3 Inner R Mill Cutter Chamferin -(1pcs R3*8 * 60)
Asin: B0CFQR1GJS | Ean: 6975587002355
Coating: Ticn Coating.
Carbide Radius Corner Rounding Cutter End Mill.
Type: Corner Rounding End Mill Meterial: Carbide End Mill.
Features
- Packing list: 1pcs R3 8 60
- Type: Corner Rounding End Mill Meterial: Carbide End Mill
- Coating: TiCN Coating
- Carbide Radius Corner Rounding Cutter End Mill
- See more on Amazon...
Brand: LUOCUT | Manufacturer: LUOCUT
See On Amazon #17
10pcs Flat End Mill Set, 2 Flute CNC Router Bit Nano Blue Coating for CNC Machine Carbide Milling Cutter Wood Cutters CNC Milling Tools| Cutting Diameter 1/1.5/2/2.5/3.175mm
Asin: B09VZF3D4B
🧭Range Of Processing--For Carving, Cutting, Engraving, Milling, Slotting, Sculpturing In Materials Like Mdf, Abs, Pvc, Acrylic, Nylon, Resin, Plastics, Density Board, Plywood, Hardwood Etc..
🎷 Use Parameter --The Most Widely Used Milling Cutter, The Recommended Spindle Speed Is 10000Mm/Min.
💥Carbide Materials--Advanced Technology Nano Blue Coating, Hardness Reach 93Hra. It Has Excellent Properties Such As High Hardness, Wear Resistance, Good Strength And Toughness, Heat Resistance And Corrosion Resistance, Especially Its High Hardness And Wear Resistance.
❤️ 1/8" Shank End Mill--Appropriately Sized For Use With Er11 Chucks And Trimmer Chucks, As Well As For Power Sanding Tools.
Features
- 10PCS CNC ROUTER BIT--Cutting Diameter: 1/1.5/2/2.5/3.175mm; Cutting Length: 4/6/8/12/17mm; Overall Length: 38mm
- 1/8 SHANK END MILL--Appropriately sized for use with ER11 chucks and trimmer chucks, as well as for power sanding tools
- RANGE OF PROCESSING--For carving, cutting, engraving, milling, slotting, sculpturing in materials like MDF, ABS, PVC, acrylic, nylon, resin, plastics, density board, plywood, hardwood etc.
- CARBIDE MATERIALS--Advanced technology nano blue coating, hardness reach 93HRA. It has excellent properties such as high hardness, wear resistance, good strength and toughness, heat resistance and corrosion resistance, especially its high hardness and wear resistance
- USE PARAMETER --The most widely used milling cutter, the recommended spindle speed is 10000mm/min
- See more on Amazon...
Brand: AnoleX | Manufacturer: AnoleX
See On Amazon #18
10pcs CNC Carbide Blade Inserts for Steel and Stainless Steel Rough Machining With Box
Asin: B0D4ZL45LB | Model: Jeffergardentv8kmcn05r | PartNumber: Jeffergardentv8kmcn05r
[Hassle- Replacement] Never Be Caught Off Guard By A Broken Insert. With 10 Included, You Have Convenient Replacements At Your Fingertips Whenever Needed..
[Superior Performance] Achieve Superb Metal Surface Finishing And Experience Excellent Wear Resistance. Unlock The Full Potential Of Your Tools With These Inserts..
[Precisely Engineered] Enjoy Accurate Cutting Action And Reduced Cutting Force Thanks To The Exquisite Workmanship Of These Inserts. Extend The Lifespan Of Your Tools..
[Versatile Usage] Suitable For Steel And Stainless Steel Finishing, Semi-Finishing, And Rough Machining. These Inserts Excel In A Variety Of Applications..
Features
- [PREMIUM CARBIDE TIPS] Crafted with top-quality carbide tips, these inserts offer exceptional strength, durability, and reliability.
- [VERSATILE USAGE] Suitable for steel and stainless steel finishing, semi-finishing, and rough machining. These inserts excel in a variety of applications.
- [HASSLE- REPLACEMENT] Never be caught off guard by a broken insert. With 10 included, you have convenient replacements at your fingertips whenever needed.
- [PRECISELY ENGINEERED] Enjoy accurate cutting action and reduced cutting force thanks to the exquisite workmanship of these inserts. Extend the lifespan of your tools.
- [SUPERIOR PERFORMANCE] Achieve superb metal surface finishing and experience excellent wear resistance. Unlock the full potential of your tools with these inserts.
- See more on Amazon...
Brand: Jeffergarden | Manufacturer: Jeffergarden
See On Amazon #19
Nxtop 10Pcs 0.8mm Carbide End Mill Engraving Milling Cutter CNC Router Bits for PCB Machine, 1/8" Shank
Asin: B07VF88KGS | Ean: 0745672480568 | UPC: 745672480568
Features: High Hardness, High Wear Resistance, High Strength. Have Sufficient Bending Strength And Wear Resistance..
Application: Can Engrave Pcb, Cnc, Circuit Boards, Metal, Plastics, Wood, Smt, Fiber Glass, Carbon And Environmental Board..
Characteristics: Sharp Cutting Edge, Milling, Hole And Plate Edge, Surface Clean, Neat, No Glitches..
Material: Use Of Ultra-Fine Grain Carbide Material With Good Milling And Cutting Performance, Ensure High Work Efficiency..
Features
- Standrd: Cutting edge diameter: 0.8mm / 0.031"; Shank diameter: 3.175mm / 1/8"; Cutting edge length: 5.5mm / 0.22"
- Material: Use of ultra-fine grain carbide material with good milling and cutting performance, ensure high work efficiency.
- Features: High hardness, high wear resistance, high strength. Have sufficient bending strength and wear resistance.
- Characteristics: Sharp cutting edge, milling, hole and plate edge, surface clean, neat, no glitches.
- Application: Can engrave PCB, CNC, Circuit boards, Metal, Plastics, Wood, SMT, Fiber glass, Carbon and environmental board.
- See more on Amazon...
Brand: Nxtop | Manufacturer: Nxtop
See On Amazon #20
Nxtop 10Pcs 1.6mm Carbide End Mill Engraving Milling Cutter CNC Router Bits for PCB Machine, 1/8" Shank
Asin: B07VPPKQQ8 | Ean: 0745672480575 | UPC: 745672480575
Features: High Hardness, High Wear Resistance, High Strength. Have Sufficient Bending Strength And Wear Resistance..
Application: Can Engrave Pcb, Cnc, Circuit Boards, Metal, Plastics, Wood, Smt, Fiber Glass, Carbon And Environmental Board..
Characteristics: Sharp Cutting Edge, Milling, Hole And Plate Edge, Surface Clean, Neat, No Glitches..
Material: Use Of Ultra-Fine Grain Carbide Material With Good Milling And Cutting Performance, Ensure High Work Efficiency..
Features
- Standrd: Cutting edge diameter: 1.6mm / 0.063"; Shank diameter: 3.175mm / 1/8"; Cutting edge length: 8.5mm / 0.33"
- Material: Use of ultra-fine grain carbide material with good milling and cutting performance, ensure high work efficiency.
- Features: High hardness, high wear resistance, high strength. Have sufficient bending strength and wear resistance.
- Characteristics: Sharp cutting edge, milling, hole and plate edge, surface clean, neat, no glitches.
- Application: Can engrave PCB, CNC, Circuit boards, Metal, Plastics, Wood, SMT, Fiber glass, Carbon and environmental board.
- See more on Amazon...
Brand: Nxtop | Manufacturer: Nxtop
See On Amazon
Looking For Something Else?
Search