KONTONTY Solar Controller Solar Charge Controller Lithium Battery Charger Solar Panel Battery Regulator USB Mobile Phone Charger Portable Battery Charger Portable Charger Sun Solar
Asin: B0CZ3ZR6JC | Model: 51P50216YRH | PartNumber: 51P50216YRH
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Solar Panel Regulator-- Current Autofocus Mppt Tracking Charging, High Charging Efficiency, Charging Process Does Not Stop Detection, Two-Way Focus Tracking..
Sun Charge Generator-- Real-Time Display Of Temperature, Charging Current And Discharge Current.
Solar Panel Controller-- .0 Solar Charging Dc Plug, .0 Dc Lamp Output Dc Plug, Easy To Connect.
Solar Panel Power Controller-- Charge 12V /24V Lithium Battery, Super Wide Charge And Discharge Adjustable.
Features
- Mppt solar charger controller-- multiple electronic protection features, including over-charging, over-discharging, reverse polarity, and over-temperature.
- Solar panel power controller-- charge 12v /24v lithium battery, super wide charge and discharge adjustable
- Solar panel regulator-- current autofocus mppt tracking charging, high charging efficiency, charging process does not stop detection, two-way focus tracking.
- Solar panel controller-- .0 solar charging dc plug, .0 dc lamp output dc plug, easy to connect
- Sun charge generator-- real-time display of temperature, charging current and discharge current
- See more on Amazon...
Brand: KONTONTY | Manufacturer: KONTONTY
Dimensions: 6.69 x 6.69 x 6.69 inches | Weight: 0.61 Pounds
See On Amazon Similar To KONTONTY Solar Controller Solar Charge
#1
Renogy Wanderer Li 30A 12V PWM Negative Ground Solar Charge Controller Solar Panel Regulator w/ Temp Sensor Function Fit for Lithium, Sealed, Gel, and Flooded Batteries, Wanderer Li 30A
Asin: B07G1PL1B9 | Model: Charge Controller | PartNumber: Charge Controller | Ean: 0816360027676 | UPC: 816360027676
【Compact In Size】Which Makes It Easy To Install Virtually Anywhere..
【Wanderer10a|30A Installation Notes】 The Default Starting Position Of The Wanderer Controller Terminal Hatches Are Closed (In The Up Position) That Could Mistakenly Look Like An Open Wire Hatch. Make Sure To First Lower Each Terminal Hatch By Screwing The Terminals Counterclockwise (Ccw) To Expose The Wire Terminal Hatch To The Open Position. Then Secure Each Cable By Rotating The Screws Clockwise (Cw) To The Closed Position..
【Remote Monitoring】 The Rs232 Communication Port Allows The Renogy Rover Charge Controller To Communicate With The Dc Home App And Renogy One M1 Via The Renogy Bt-1 Bluetooth Module (Highly Recommend To Add-On ). This Will Enable You To Monitor The Status And Productivity Of Your Panels On The Go..
【Multiple Battery Adaptation】 Deep Cycle Sealed (Agm), Gel, Flooded And Lithium Battery Option Ready..
【Smart 4-Stage Pwm Charging】Smart 4-Stage Pwm Charging (Bulk, Boost, Float, And Equalization) Increases Battery Life And Improves System Performance. Intelligent Protection Against Reverse Polarity, Overcharging, Short-Circuit, And Reverse Current..
Features
- Optimized for 12V Batteries Compatible with 12V battery banks on the market, including lithium batteries. The LED indicators allow you to set battery types and check the charging staus with ease.
- Smart 4-Stage PWM Charging Smart 4-Stage PWM charging (Bulk, Boost, Float, and Equalization) increases battery life and improves system performance. Intelligent protection against reverse polarity, overcharging, short-circuit, and reverse current.
- Compact in size Which makes it easy to install virtually anywhere.
- Multiple battery adaptation Deep Cycle Sealed (AGM), Gel, Flooded and Lithium battery option ready.
- Wanderer10A|30A Installation Notes The default starting position of the Wanderer controller terminal hatches are closed (in the UP position) that could mistakenly look like an open wire hatch. Make sure to FIRST lower each terminal hatch by screwing the terminals counterclockwise (CCW) to expose the wire terminal hatch to the open position. THEN secure each cable by rotating the screws clockwise (CW) to the closed position.
- Remote Monitoring The RS232 communication port allows the Renogy Rover charge controller to communicate with the DC Home app and Renogy ONE M1 via the Renogy BT-1 Bluetooth module (highly recommend to add-on ). This will enable you to monitor the status and productivity of your panels on the go.
- See more on Amazon...
First Available: 02/28/2021
Brand: Renogy | Manufacturer: Renogy
Dimensions: 1.76 x 6.45 x 4.31 inches | Weight: 0.30 pounds
Warranty: 1-year material and workmanship warranty
See On Amazon #2
[Upgraded] 30A Solar Charge Controller, Black Solar Panel Battery Intelligent Regulator with Dual USB Port 12V/24V PWM Auto Paremeter Adjustable LCD Display (30a)
Asin: B08L8TBCK6 | Ean: 0713484981214 | UPC: 713484981214
Please Note: The Charge Regulator Is Only Suitable For Lead-Acid Batteries: Open, Agm, Gel. Do Not Support Any Other Batteries. The Solar Controller Will Turn Off Automatically To Protect The Lifespan Of Your Battery If The Voltage Of The Battery Drop Below 8V..
Warranty: 12-Month Warranty And Lifetime Technique Support. If There Is Any Problem, Please Contact Us Through Amazon Email, We Will Arrange A Refund Or A Replacement..
Lcd Display: Let You Know The Status And Data With Lcd Display. You Can Also Switch Modes And Parameter Configuration Conveniently And Can Use This Controller In A Different Place Like Home, Industrial, Commercial, Etc..
Safe To Use: Equipped With Overcurrent Protection, Short-Circuit Protection, Inverse Connection Protection, Low Voltage, And Overcharge Protection, And Have Fully 3-Stage Pwm Charge Management. This 30A Solar Charge Controller Will Help You Improve The System Efficiency Safely And Prolong The Life Span Of The Battery..
Features
- UPGRADED SOLAR PANEL CONTROLLER: Compatible with 12V 24V system.This solar charge controller helps you manage the working of solar panels and battery in solar systems automatically with the build-in industrial microcontroller. You don't need to reset it when the battery runs out cause it will memorize various parameters set by the user. You can also charge your mobile phone, tablet, PCs through Dual USB output 5V/2.5A (max).
- SAFE TO USE: Equipped with overcurrent protection, short-circuit protection, inverse connection protection, low voltage, and overcharge protection, and have fully 3-stage PWM charge management. This 30A solar charge controller will help you improve the system efficiency safely and prolong the life span of the battery.
- PLEASE NOTE: The charge regulator is only suitable for lead-acid batteries: OPEN, AGM, GEL. Do not support any other batteries. The solar controller will turn off automatically to protect the lifespan of your battery if the voltage of the battery drop below 8V.
- LCD DISPLAY: Let you know the status and data with LCD Display. You can also switch modes and parameter configuration conveniently and can use this controller in a different place like home, industrial, commercial, etc.
- WARRANTY: 12-month warranty and lifetime technique support. If there is any problem, please contact us through amazon email, we will arrange a refund or a replacement.
- See more on Amazon...
Brand: Depvko | Manufacturer: Depvko
Dimensions: 1.30 x 5.28 x 2.80 Inches
See On Amazon #3
SOLPERK 10A Solar Charge Controller Waterproof Solar Panel Controller 12V/24V PWM Solar Panel Battery Intelligent Regulator for RV Boat car with LED Display
Asin: B0946MWYPK
✔️【Indicator Monitoring】You Can Understand Its Current Working Status Through The Three Indicators On The Solar Panel Charge Controller. Load Normal Output: Green Light Is Always On; Battery Is Normal: Green Light Is Always On; Solar Panel Is Charging Normally: Red Light Is Always On..
✔️【What You Get】1 Solar Charger Controller, 1 Manual. Extended 12 Months Warranty And Our 7*24H Technical Service Support. If You Have Any Questions, Please Contact Us Directly..
✔️【Easy To Install And Operate】The Solar Panel Controller Adopts Sae Port, Plug And Play. A Manual With Clear Connection Steps Is Included. There Are 2 Pre-Drilled Holes On The Controller, You Can Install It Anywhere According To Your Needs!.
✔️【Intelligent Protection】Intelligent 3-Stage Pmw Charging Improves Charging Efficiency. The Solar Controller Not Only Extends Battery Life And Improves System Performance, But Also Has Multiple Protection Functions: Battery Under-Voltage, Over-Voltage, Output Overload, Short Circuit, Battery, Solar Panel Anti-Back Connect Protection..
Features
- Waterproof Solar Charge Controller IP67 waterproof, suitable for outdoor use. Automatically identify voltage, 12V Max power: 150W, 24V Max power: 300W. The maximum current is 10A. Compatible with various 12V/24V deep-cycle batteries, such as AGM, GEL, Flooded. Adopting brand MCU chips to realize fast intelligent control and ultra-low standby power consumption.
- Intelligent protection Intelligent 3-stage PMW charging improves charging efficiency. The solar controller not only extends battery life and improves system performance, but also has multiple protection functions: Battery under-voltage, over-voltage, output overload, short circuit, battery, solar panel anti-back connect protection.
- Indicator Monitoring You can understand its current working status through the three indicators on the solar panel charge controller. Load normal output: green light is always on; battery is normal: green light is always on; solar panel is charging normally: red light is always on.
- Easy to install and operate The solar panel controller adopts SAE port, plug and play. A manual with clear connection steps is included. There are 2 pre-drilled holes on the controller, you can install it anywhere according to your needs!
- What You Get 1 solar charger controller, 1 manual. Extended 12 months warranty and our 7*24h technical service support. If you have any questions, please contact us directly.
- See more on Amazon...
Brand: SOLPERK | Manufacturer: SOLPERK
See On Amazon #4
Renogy 30A 12V/24V PWM Solar Charge Controller with LCD Display Flush Mount Design Negative Ground, Compatible with Sealed, Gel, Flooded and Lithium Batteries, Adventurer 30A,black
Asin: B07BBKFTNV | Model: Adventurer 30A Li 12V/24V | PartNumber: Adventurer 30A Li 12V/24V | Ean: 0816360026396 | UPC: 816360026396
【Flush Mount Design】Designed To Cleanly Flush Mount On Walls, Providing A Sleek, Integrated Look. An Included Surface Mount Attachment Allows For Versatility In Mounting..
【Multiple Battery Adaptation】 Deep Cycle Sealed (Agm), Gel, Flooded And Lithium Battery Option Ready..
【Real-Time Monitoring】The Rs232 Port Can Work With The Bt-1 Bluetooth Module To Deliver Real-Time Energy Data Across The Dc Home Smart Phone App & Renogy One M1.
【Negative Ground】The Adventurer Is A Negative Ground Controller. This Ensure Compatibility With Any Negative Ground System, Which Is The Standard And Most Conventional Way Of Grounding. Any Negative Connection On The Solar Module, Battery And Load Can Be Safely Earth Grounded As Required..
【Smart 4-Stage Pwm Charging】Smart 4-Stage Pwm Charging (Bulk, Boost, Float, And Equalization) Increases Battery Life And Improves System Performance. Intelligent Protection Against Reverse Polarity, Overcharging, Short-Circuit, And Reverse Current..
Features
- 12V/24V Automatically Detect Automatically detects 12V or 24V DC system voltages (for non-lithium batteries). The LCD screen and multiple LED indicators display the solar charging and battery operation information, customizable parameters, and error codes.
- Smart 4-Stage PWM Charging Smart 4-Stage PWM charging (Bulk, Boost, Float, and Equalization) increases battery life and improves system performance. Intelligent protection against reverse polarity, overcharging, short-circuit, and reverse current.
- Flush Mount Design Designed to cleanly flush mount on walls, providing a sleek, integrated look. An included Surface Mount Attachment allows for versatility in mounting.
- Negative Ground The Adventurer is a negative ground controller. This ensure compatibility with any negative ground system, which is the standard and most conventional way of grounding. Any negative connection on the solar module, battery and load can be safely earth grounded as required.
- Multiple Battery Adaptation Deep Cycle Sealed (AGM), Gel, Flooded and Lithium battery option ready.
- Real-time Monitoring The RS232 port can work with the BT-1 Bluetooth module to deliver real-time energy data across the DC Home smart phone app & Renogy ONE M1
- See more on Amazon...
First Available: 02/22/2018
Brand: Renogy | Manufacturer: Renogy
Dimensions: 1.90 x 6.56 x 4.50 inches | Weight: 0.60 Pounds
Warranty: NEVER connect the solar panel array to the controller without a battery. Battery must be connected first. This may cause a dangerous occurrence where the controller would experience a high open circuit voltage at the terminals. • Ensure input voltage does not exceed 50 VDC to prevent permanent damage. Use the Open Circuit (Voc) to make sure the voltage does not exceed this value when connecting panels together in series. • The charge controller should be installed indoors in a well-ventilated, cool, and dry environment. • Do NOT allow water to enter the controller.
See On Amazon #5
Renogy Voyager 20A 12V/24V PWM Waterproof Solar Charge Controller w/ LCD Display for AGM, Gel, Flooded and Lithium Battery, Used in RVs, Trailers, Boats, Yachts, Voyager 20A
Asin: B07YXZMKD2 | Model: Voyager 20A PWM | PartNumber: Voyager 20A PWM | Ean: 0810009713517 | UPC: 810009713517
Multiple Protections: The Voyager Controller Has Multiple Intelligent Protections Against Reverse Polarity, Over Charge, Short-Circuit, Reverse Current, Overload, And Over Discharge, Keeping Your Battery Fully Protected..
Backlit Lcd Displaying System: The Voyager Comes With An Lcd Display Showing Accurate And Timely Information Including Charging Current, Generated Energy, Temperature, Battery Voltage, And Error Codes That Allows Users To Monitor And Control Charging..
Support Multiple Battery Types: The Voyager Controller Can Automatically Sense 12V Or 24V System Voltage When Paired With A Gel, Agm, Or Flooded Batteries. It Also Comes With A Lithium Activation Feature..
Ip67 Rated Waterproof: With An Ip67 Rated Waterproof Design, The Voyager Controller Is Suitable For Outdoor Use And Will Remain Fully Operational When Exposed To Water Spray, Rain, Or Condensation..
Features
- 4-STAGE PWM Technology: The Voyager controller is equipped with advanced smart PWM technology with high charging efficiency. It provides 4-stage charging (Bulk, Absorption, Float and Equalization) in order to protect the battery.
- IP67 Rated Waterproof: With an IP67 rated waterproof design, the Voyager controller is suitable for outdoor use and will remain fully operational when exposed to water spray, rain, or condensation.
- Multiple Protections: The Voyager controller has multiple intelligent protections against reverse polarity, over charge, short-circuit, reverse current, overload, and over discharge, keeping your battery fully protected.
- Support Multiple Battery Types: The Voyager controller can automatically sense 12V or 24V system voltage when paired with a Gel, AGM, or Flooded batteries. It also comes with a Lithium activation feature.
- Backlit LCD displaying system: The Voyager comes with an LCD display showing accurate and timely information including charging current, generated energy, temperature, battery voltage, and error codes that allows users to monitor and control charging.
- See more on Amazon...
First Available: 11/24/2020
Brand: Renogy | Manufacturer: Renogy
Dimensions: 1.40 x 6.08 x 3.83 inches | Weight: 0.55 Pounds
Warranty: 2-year material and workmanship warranty
See On Amazon #6
ECO-WORTHY 30A Solar Charger Controller Solar Panel Battery Intelligent Regulator with Dual USB Port Auto 12/24V PWM Positive Ground
Asin: B08JBLMC33
[Battery Type]: The Charge Regulator Is Suitable For Lead-Acid Batteries, Gel Batteries And Lithium Phosphate Batteries. For Protecting The Lifespan Of Your Battery, Once The Voltage Of The Battery Drop Below 8V, The Solar Controller Will Turn Off Automatically.
[Easy To Install And Operate]: The Charge Controller Should Connect The Battery First, Then The Solar Panel, And Finally The Load! The Disassembly Sequence Is Contrary To The Wiring Order.Dual Mosfet Reverse Current Protection, Low Heat Production. ( Note: The Charge Controller Will Heat Up When It Is Running. Please Be Careful To Install The Charger Controller On A Flat, Well-Ventilated Place).
[Lcd Display]: Comes With A Display That Can Clearly Indicate The Status And Data, It Can Be Conveniently Switched Modes And Parameter Configuration, Suitable For Home, Industrial, Commercial Etc..
[Multiple Protection Functions]: Eco-Worthy Solar Controller Has Short-Circuit Protection, Open-Circuit Protection,Reverse Protection, Over-Load Protection. Fully 3-Stage Pwm Charge Management, Improve System Efficiency And Prolong The Life Span Of The Battery.
Features
- [30A Solar Charge controller]: the solar charger controller compatibility with 12V 24V system. Discharge Current: 10A,build-in industrial micro controller, automatically manage the working of solar panel and battery in solar system. Dual USB output 5V/2.5A (max), to support mobile phone chargeing
- [Multiple Protection Functions]: ECO-WORTHY solar controller has short-circuit protection, open-circuit protection,reverse protection, over-load protection. Fully 3-stage PWM charge management, improve system efficiency and prolong the life span of the battery
- [Battery Type]: The charge regulator is suitable for lead-acid batteries, gel batteries and lithium phosphate batteries. For protecting the lifespan of your battery, once the voltage of the battery drop below 8V, the solar controller will turn off automatically
- [LCD Display]: Comes with a display that can clearly indicate the status and data, it can be conveniently switched modes and parameter configuration, suitable for home, industrial, commercial etc.
- [Easy to Install and Operate]: The charge controller should connect the battery first, then the solar panel, and finally the load! The disassembly sequence is contrary to the wiring order.Dual mosfet Reverse current protection, low heat production. ( Note: The charge controller will heat up when it is running. Please be careful to install the charger controller on a flat, well-ventilated place)
- See more on Amazon...
Brand: ECO-WORTHY | Manufacturer: ECO-WORTHY
See On Amazon #7
[Upgraded] 30A Solar Charge Controller 12V/ 24V Solar Panel Charge Controller Intelligent Regulator with Dual USB Port Auto Parameter LCD Display and Timer Setting ON/Off Hours
Asin: B09LLMK7PD | Model: R000079 | PartNumber: R000079 | Ean: 0761594900007 | UPC: 761594900007
3-Stage Pwm Control Charging: Fully 3-Stage Pwm Regulation Charging Using Direct Charge, Lifting Charge, Floating Charge Three-Stage Pwm Regulation Charging Mode. Using The Controller To Realize Efficient And Fast Intelligent Charging, And Effectively Prolong The Service Life Of The Battery..
Confidence Service: Our Brand Werchtay Team Has Complete After-Sales Service, And The Product Comes With An Instruction Manual. If You Encounter Problems, Please Contact Our Team. We Provide One-Year Warranty And Lifetime After-Sales Service..
Multiple Intelligent Protection: Built-In Overcurrent Protection, Short Circuit Protection, Reverse Connection Protection, Open Circuit Protection, All Automatic Recovery, No Damage To The Controller, A Reliable Protector For Your Devices. If The Battery Voltage Is Lower Than 8V, The Solar Controller Will Automatically Shut Down To Protect The Battery Life.
Functional Lcd Screen: Easy To Install And Operate, Intuitive Lcd Display That Can Clearly Indicate The Status And Data Is Able To Switch Modes And Parameter Configuration, The Level Of Complete Power-Off Is Adjustable, Which Can Perfectly Protect The Lithium Battery From Over-Discharge, Suitable For Home, Industrial, Commercial Etc..
Features
- SMART PWM TECHNOLOGY: The controller compatibility with 12V and 24V system, Discharge Current: 30A; dual USB output 5V / 2.5A, Build-in industrial microcontroller for automatical management, memorizing various parameters set by the user and the data won't be lost when the battery runs out, suitable for lead-acid batteries: OPEN, AGM, GEL. Controller mode: b1: lead-acid. b2: ternary lithium. b3: Lithium iron phosphate.
- FUNCTIONAL LCD SCREEN: Easy to install and operate, Intuitive LCD display that can clearly indicate the status and data is able to switch modes and parameter configuration, The level of complete power-off is adjustable, which can perfectly protect the lithium battery from over-discharge, suitable for home, industrial, commercial etc.
- 3-STAGE PWM CONTROL CHARGING: Fully 3-stage PWM regulation charging using direct charge, lifting charge, floating charge three-stage PWM regulation charging mode. Using the controller to realize efficient and fast intelligent charging, and effectively prolong the service life of the battery.
- MULTIPLE INTELLIGENT PROTECTION: Built-in overcurrent protection, short circuit protection, reverse connection protection, open circuit protection, all automatic recovery, no damage to the controller, a reliable protector for your devices. If the battery voltage is lower than 8V, the solar controller will automatically shut down to protect the battery life
- CONFIDENCE SERVICE: Our brand WERCHTAY team has complete after-sales service, and the product comes with an instruction manual. If you encounter problems, please contact our team. We provide one-year warranty and lifetime after-sales service.
- See more on Amazon...
Brand: WERCHTAY | Manufacturer: WERCHTAY
Dimensions: 1.50 x 5.30 x 2.75 inches
See On Amazon #8
POWOXI Solar Panels Charge Controller, 8A Battery Regulator for 12V Solar Battery Charger, Solar Battery Maintainer and 12 Volt Batteries Power Kit
Asin: B07F85CDM6 | Model: Solar Panels Charge Controller 8A | PartNumber: Solar Panels Charge Controller 8A | Ean: 0674551458469 | UPC: 674551458469
【Easy To Monitor Led Indicator】: This Solar Controller Integrates Two Leds, Both Green And Red Indicator Lights Are On (Fully Charged) And Only The Red Indicator Light (Charging). It Also Provides Overcharge, Over-Discharge, And Overload Protection, As Well As Short Circuit And Reverses Connection Protection..
【Multiple Protection】: This Product Provides Overcharge, Over-Discharge, And Overload Protection, As Well As Short Circuit And Reverses Connection Protection..
【Note, The Controller Needs To Be Connected To The Battery To Work】 Advantage 1: It Will Automatically Turn Off At Night And Will Not Consume Battery Power. Advantage 2: If There Is A Connection Error, It Will Not Be Damaged..
【How To Connect】: Before Connecting, Please Recognize The Correctness Of Positive And Negative Polarity, Our Controller Red Is Positive, And Black Is Negative, Please Connect Positive To Positive, And Negative To Negative, We Have Attached A Polarity Converter, If The Product Does Not Work, Please Contact The After-Sales Email, We Will Reply You In Time..
【The Maximum Input Power Of Solar Energy Is 130W】: The Maximum Power Of Solar Panels Is 130W, The Maximum Voltage Is 22V, And The Maximum Current Is 8A. It Is Suitable For A 12V Rechargeable Battery. To Prolong Its Service Life, Please Do Not Overload It..
Features
- Applicable to solar panels above 20W : 8A solar controller is Applicable to solar panels above 20W and will be more efficient, applicable to 12V batteries. The solar panel can convert light energy into electricity stored in the battery, and the battery will be protected by the solar controller. The controller only rely on solar panels to power, and does not consume battery power.
- The maximum input power of solar energy is 130W : The maximum power of solar panels is 130W, the maximum voltage is 22V, and the maximum current is 8A. It is suitable for a 12V rechargeable battery. To prolong its service life, please do not overload it.
- Easy to Monitor LED Indicator : This solar controller integrates two LEDs, both green and red indicator lights are on (fully charged) and only the red indicator light (charging). It also provides overcharge, over-discharge, and overload protection, as well as short circuit and reverses connection protection.
- How to connect : Before connecting, please recognize the correctness of positive and negative polarity, our controller red is positive, and black is negative, please connect positive to positive, and negative to negative, we have attached a polarity converter, if the product does not work, please contact the after-sales email, we will reply you in time.
- Multiple protection : This product provides overcharge, over-discharge, and overload protection, as well as short circuit and reverses connection protection.
- Note, the controller needs to be connected to the battery to work Advantage 1: It will automatically turn off at night and will not consume battery power. Advantage 2: If there is a connection error, it will not be damaged.
- See more on Amazon...
Brand: POWOXI | Manufacturer: POWOXI
Dimensions: 3.90 x 4.70 x 1.50 inches | Weight: 5.90 ounces
See On Amazon #9
[Upgraded] 30A Solar Charge Controller, Black Solar Panel Battery Intelligent Regulator with Dual USB Port 12V/24V PWM Auto Paremeter Adjustable LCD Display (New)
Asin: B09799F9BQ | Ean: 0744252414177 | UPC: 744252414177
Please Note: The Charge Regulator Is Only Suitable For Lead-Acid Batteries: Open, Agm, Gel. Do Not Support Any Other Batteries. The Solar Controller Will Turn Off Automatically To Protect The Lifespan Of Your Battery If The Voltage Of The Battery Drop Below 8V..
Warranty: 12-Month Warranty And Lifetime Technique Support. If There Is Any Problem, Please Contact Us Through Amazon Email, We Will Arrange A Refund Or A Replacement..
Lcd Display: Let You Know The Status And Data With Lcd Display. You Can Also Switch Modes And Parameter Configuration Conveniently And Can Use This Controller In A Different Place Like Home, Industrial, Commercial, Etc..
Safe To Use: Equipped With Overcurrent Protection, Short-Circuit Protection, Inverse Connection Protection, Low Voltage, And Overcharge Protection, And Have Fully 3-Stage Pwm Charge Management. This 30A Solar Charge Controller Will Help You Improve The System Efficiency Safely And Prolong The Life Span Of The Battery..
Features
- UPGRADED SOLAR PANEL CONTROLLER: Compatible with 12V 24V system.This solar charge controller helps you manage the working of solar panels and battery in solar systems automatically with the build-in industrial microcontroller. You don't need to reset it when the battery runs out cause it will memorize various parameters set by the user. You can also charge your mobile phone, tablet, PCs through Dual USB output 5V/2.5A (max).
- SAFE TO USE: Equipped with overcurrent protection, short-circuit protection, inverse connection protection, low voltage, and overcharge protection, and have fully 3-stage PWM charge management. This 30A solar charge controller will help you improve the system efficiency safely and prolong the life span of the battery.
- PLEASE NOTE: The charge regulator is only suitable for lead-acid batteries: OPEN, AGM, GEL. Do not support any other batteries. The solar controller will turn off automatically to protect the lifespan of your battery if the voltage of the battery drop below 8V.
- LCD DISPLAY: Let you know the status and data with LCD Display. You can also switch modes and parameter configuration conveniently and can use this controller in a different place like home, industrial, commercial, etc.
- WARRANTY: 12-month warranty and lifetime technique support. If there is any problem, please contact us through amazon email, we will arrange a refund or a replacement.
- See more on Amazon...
Brand: Depvko | Manufacturer: Depvko
See On Amazon #10
10A 12V MPPT Solar Charge Controller,PowMr Small Portable Solar Panel Regulator with LCD Display,Long Press Switching of Battery Type,for 12 Volt Gel AGM Lithium LiFePO4 Battery
Asin: B0CHVQPN2R | Model: RV-10A | PartNumber: RV-10A
【Suitable For A Wide Range Of Batteries】Compatible With A Wide Range Of 12V Batteries Such As Agm, Gel, Deep Cycle, Sealed, Lead Acid, Liquid Rich And Lifepo4 Lithium Batteries. Ideal For Deep Cycle, Starter, Marine, Automotive, Powersports And More..
Note: 1. Designed For 12V Battery, Please Do Not Connect Higher Voltage Battery. 2. Pv Voc Needs To Be Higher Than The Battery Voltage, The Minimum Is 15V, The Maximum Do Not Exceed 30V. 3. Connection Order: Connect The Battery First, And Then Connect The Solar Panel..
【Ip45 Waterproof Performance】The Controller Has Good Waterproof Performance, You Can Do Daily Life Waterproof No Need To Worry. (Warm Tips: In Order To Extend The Service Life, Please Do Not Immerse The Controller In Water.).
【Easy To Use】Sae Connectors Are Quick To Connect Or Disconnect, Plug And Play, Convenient And Practical..
【Comprehensive Protection】The Controller Has A Built-In Safety Protection System And An Intelligent 3-Stage Charging Mode (Equalization, Float Charging, Boosting), Which Gives You Efficient And Safe Charging Efficiency And Also Fully Protects Your Batteries From Over-Charging, Over-Discharging, Over-Voltage, Over-Current, Overloading, Short-Circuiting, Reversing Polarity And Other Safety Protections, Which Makes It Safer To Use..
【Portable Mini Charge Controller】Mini Mppt Solar Charge Controller Is Equipped With Lcd Display And One-Touch (Need To Long Press The Button) Button To Change The Battery Type, Which Is Convenient For You To Monitor The Working Status Of Solar Panel And Battery. Compared With Other Controllers, It Can Be Easily Carried And Save Space. Perfect For Outdoor Use..
Features
- 100% Efficient MPPT Charge Controller PowMr newly upgraded 10A MPPT solar charge controller for 12V battery systems with maximum power point tracking means maximizing the use of solar energy to charge your batteries can help you save a lot of charging time compared to other products.
- Portable Mini Charge Controller Mini MPPT solar charge controller is equipped with LCD display and one-touch (need to long press the button) button to change the battery type, which is convenient for you to monitor the working status of solar panel and battery. Compared with other controllers, it can be easily carried and save space. Perfect for outdoor use.
- Suitable for a wide range of batteries Compatible with a wide range of 12V batteries such as AGM, Gel, Deep Cycle, Sealed, Lead Acid, Liquid Rich and LiFePO4 Lithium batteries. Ideal for deep cycle, starter, marine, automotive, powersports and more.
- Comprehensive Protection The controller has a built-in safety protection system and an intelligent 3-stage charging mode (equalization, float charging, boosting), which gives you efficient and safe charging efficiency and also fully protects your batteries from over-charging, over-discharging, over-voltage, over-current, overloading, short-circuiting, reversing polarity and other safety protections, which makes it safer to use.
- IP45 waterproof performance The controller has good waterproof performance, you can do daily life waterproof no need to worry. (Warm tips: In order to extend the service life, please do not immerse the controller in water.)
- Easy to use SAE connectors are quick to connect or disconnect, plug and play, convenient and practical.
- Note: 1. Designed for 12V battery, please do not connect higher voltage battery. 2. PV Voc needs to be higher than the battery voltage, the minimum is 15V, the maximum do not exceed 30V. 3. Connection order: connect the battery first, and then connect the solar panel.
- See more on Amazon...
Brand: PowMr | Manufacturer: PowMr
See On Amazon
Looking For Something Else?
Search