Low Pressure Pump calibrator for HVAC, Laboratories, Room Pressure Monitoring, Filter Monitoring Applications. IK-LPP-01
Asin: B0CZF1CG1F
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Master Connection:4Mm Push Fit Hose To 1/4” Bsp (F) | Dimensions: 206 X 48 X 26 Mm (H X W X D) | Weight: 600 Grams Approx..
Applications: Hvac, Laboratories, Pharmaceuticals Monitoring, Filter Monitoring..
Supply Scope: 1 Unit Of Ik-Lpp-01 Low Pressure Pump Calibrator, Swivel Adapter (6Mm Legris To 1/4” Bsp(F)), 6Mm Put Hose (1 Meter) And Instruction Manual.
Maximum Range: 1 Bar | Medium: Air | Material Of Construction: Brass- Electroless Ni Plating | Vernier-Fine Adjustment : Micro - Adjustable, Volume.
Features
- Fine Adjustment of Pressure: 1000 mBar (1Bar), Vacuum: 300 mBar (-0.3 bar)
- Maximum Range: 1 Bar | Medium: Air | Material of Construction: Brass- Electroless Ni Plating | Vernier-Fine adjustment : Micro - adjustable, Volume
- Master Connection:4mm push fit hose to 1/4 BSP (F) | Dimensions: 206 X 48 X 26 mm (H X W X D) | Weight: 600 Grams Approx.
- Supply Scope: 1 Unit of IK-LPP-01 Low Pressure Pump Calibrator, Swivel Adapter (6mm legris to 1/4 BSP(F)), 6mm PUT Hose (1 Meter) and Instruction Manual
- Applications: HVAC, Laboratories, Pharmaceuticals Monitoring, Filter Monitoring.
- See more on Amazon...
Brand: INSTRUKART | Manufacturer: INSTRUKART
See On Amazon Similar To Low Pressure Pump calibrator for
#1
Hand Pump Calibrator with Pressure and Vacuum Gauge for Calibration Labs, Field Calibration Model: AI-DPI-2200
Asin: B0BMLSJTS3
Master Gauge Range: -1 To 25 Bar | Accuracy : ±0.5% | Case Size 2.5" (63Mm) | Case Material Abs (Ip64) | Rubber Boot Silicone Rubber (Ip65).
Operation Life 1 Million Cycles | Power Supply 2 X Aaa Battery (1.5V) | Battery Life 2Yrs (Auto Shut-Off Mode) | Power Mode Auto Or Manual Shut-Off | Display Digits 4 Digits To 5,000 Psi | Pressure Unit Selection Psi, Bar, Kg/Cm², Mpa.
Supply Scope: 1 Unit Of Ai-Dpi-2200 Pressure And Vacuum Calibrator, 1 Unit Of Master Gauge (Range: -1 To 25), 3 Nos Reducers (1/4", 1/2", 3/4") And Instruction Manual. | Applications: Calibration Labs, Field Calibration, Pressure Gauge Calibration, Pressure Transmitter Calibration..
Operation Mode : Continuous Pressue Reading | Response Time : ±3 Hz Display Refresh Rate | Proof / Burst Pressure : 200% / 300% Fs | Operating Temperature : 14°F To 122°F / -10°C To 50°C | Storage Temperature: -4°F To 167°F / -20°C To 75°C | Lcd Display 2" X 3/4" (48Mm X 16Mm) | Connection 1/4" Npt 304Ss | Sensor 316L Welded, Piezo.
Pressure Range: Ambient To 30 Kg/Cm² (30 Bar) 430 Psi | Material Of Construction: Aluminium And Stainless Steel; Weight Approx. 1.5 Kgs..
Features
- Model: AI-DP1-2200 | Measuring Parameters: Pressure and Vacuum | Vacuum Range: Ambient to -0.9 Kg/Cm |
- Pressure Range: Ambient to 30 Kg/Cm (30 Bar) 430 PSI | Material Of Construction: Aluminium and Stainless Steel; Weight Approx. 1.5 Kgs.
- Master Gauge Range: -1 to 25 Bar | Accuracy : 0.5% | Case Size 2.5 (63mm) | Case Material ABS (IP64) | Rubber Boot Silicone rubber (IP65)
- Operation Mode : Continuous pressue reading | Response Time : 3 Hz display refresh rate | Proof / Burst Pressure : 200% / 300% FS | Operating Temperature : 14 F to 122 F / -10 C to 50 C | Storage Temperature: -4 F to 167 F / -20 C to 75 C | LCD Display 2 x 3/4 (48mm x 16mm) | Connection 1/4 NPT 304SS | Sensor 316L welded, Piezo
- Operation Life 1 million cycles | Power Supply 2 x AAA battery (1.5V) | Battery Life 2yrs (auto shut-off mode) | Power Mode Auto or manual shut-off | Display Digits 4 digits to 5,000 psi | Pressure Unit Selection psi, bar, kg/cm , MPa
- Supply Scope: 1 Unit of AI-DPI-2200 Pressure and Vacuum Calibrator, 1 Unit of Master Gauge (Range: -1 to 25), 3 Nos Reducers (1/4, 1/2, 3/4) and Instruction Manual. | Applications: Calibration Labs, Field Calibration, Pressure Gauge Calibration, Pressure Transmitter Calibration.
- See more on Amazon...
Brand: INSTRUKART | Manufacturer: Ace Instruments
See On Amazon #2
Hand Operated Pressure and Vacuum Pump Calibrator (Only Hand Pump) for Calibration Labs, Field Calibration and Pressure Transmitter Calibration Model: AI-DP1-2200
Asin: B085CH675M
Material Of Construction: Aluminium And Stainless Steel; Weight Approx. 1.5 Kgs..
Applications: Calibration Labs, Field Calibration, Pressure Gauge Calibration, Pressure Transmitter Calibration..
Supply Scope: 1 Unit Of Calibrator, 3 Nos Reducers (1/4", 1/2", 3/4")..
Vacuum Range: Ambient To -0.9 Kg/Cm² | Pressure Range: Ambient To 30 Kg/Cm² (30 Bar) 430 Psi.
Features
- Model: AI-DP1-2200 | Measuring Parameters: Pressure and Vacuum | Model: Hand operated
- Vacuum Range: Ambient to -0.9 Kg/Cm | Pressure Range: Ambient to 30 Kg/Cm (30 Bar) 430 PSI
- Material Of Construction: Aluminium and Stainless Steel; Weight Approx. 1.5 Kgs.
- Supply Scope: 1 Unit of Calibrator, 3 Nos Reducers (1/4, 1/2, 3/4).
- Applications: Calibration Labs, Field Calibration, Pressure Gauge Calibration, Pressure Transmitter Calibration.
- See more on Amazon...
Brand: Ace Instruments | Manufacturer: Ace Instruments
Weight: 3.31 Pounds
See On Amazon #3
Differential Pressure Gauge Calibrator with Master Gauge (Testo 510) for HVAC, Laboratories, Room Pressure Monitoring Model: IK HPP-01 (Pressure Pump with Master Gauge)
Asin: B0D3585QQ4
Master Gauge: Testo 510 Differential Pressure Indicator | Range: 0 To 100 Hpa | Accuracy: ±(0.1 Hpa + 1.5 % Of M.V.) (1.01 To 100 Hpa), ±0.03 Hpa (0 To 0.30 Hpa), ±0.05 Hpa (0.31 To 1.00 Hpa) | Resolution: 0.01 Hpa |.
Supply Scope: 1 Unit Of Pressure Calibrator (Ik Hpp-01), 1 Unit Of Master Gauge (Testo 510), Silicon Tubes, Carrying Case, Instruction Manual And Factory Calibration Certificate | Applications: Hvac, Laboratories, Calibration Labs..
Positive Pressure: 500 Mbar | Maximum Static Pressure: 1.5 Bar | Selectable Units: Hpa, Mbar, Pa, Mmh2o, Inh2o, Inhg, Mmhg, Psi, M/S, Fpm | Operating Temperature: 0 To 50 °C | Storage Temperature: -40 To +70 °C | Measuring Rate: 0.5 S | Protection Class: Ip40.
Vacuum Range: Upto 400 Mm.H.G | Pressure Ports: 2 Pressure Ports With Ferrule Fitting, 1 Each For Master Gauge & Instrument Under Calibration| Approximate Volume: 400 C.C | Maximum Pressure: 30 Psig | Maximum Vacuum: 70% At Atmospheric Pressure | Adjustment: Coarse & Fine Control | Outlet Connection: One 1/4” Bsp Or Ferrules Union |.
Features
- Calibrator: Static Pressure Pump Calibrator (PSI-PP3 L) | Knobs: 2 Nos for Fine & Coarse Pressure Adjustment | Pressure Range: Upto 1 Bar |
- Vacuum Range: Upto 400 mm.H.g | Pressure Ports: 2 Pressure Ports with Ferrule Fitting, 1 Each for Master Gauge & Instrument Under Calibration| Approximate Volume: 400 C.C | Maximum Pressure: 30 PSIG | Maximum Vacuum: 70% at Atmospheric Pressure | Adjustment: Coarse & Fine Control | Outlet Connection: One 1/4 BSP or Ferrules Union |
- Master Gauge: Testo 510 Differential Pressure Indicator | Range: 0 to 100 hPa | Accuracy: (0.1 hPa + 1.5 % of m.v.) (1.01 to 100 hPa), 0.03 hPa (0 to 0.30 hPa), 0.05 hPa (0.31 to 1.00 hPa) | Resolution: 0.01 hPa |
- Positive Pressure: 500 mbar | Maximum Static Pressure: 1.5 bar | Selectable Units: hPa, mbar, Pa, mmH2O, inH2O, inHg, mmHg, psi, m/s, fpm | Operating Temperature: 0 to 50 C | Storage Temperature: -40 to +70 C | Measuring Rate: 0.5 s | Protection Class: IP40
- Supply Scope: 1 Unit of Pressure Calibrator (IK HPP-01), 1 Unit of Master Gauge (Testo 510), Silicon Tubes, carrying Case, Instruction Manual and Factory Calibration Certificate | Applications: HVAC, Laboratories, Calibration Labs.
- See more on Amazon...
Brand: INSTRUKART | Manufacturer: Instrukart
Weight: 1.76 Pounds
See On Amazon #4
INSTRUKART High Pressure Hydraulic Hand Pump Calibrator (Range: 0 to 600 Kg/Cm ) for Field Calibration, Calibration Labs Model: AI-DPI-2300 (Only Hand Pump Calibrator)
Asin: B0D1RCPR36
Operation: Pressure Is Generated By The Hand Operation Of The Caliper Handle Which Move A Piston Back And Forth Resulting In The Suction And Delivery Fluid Used For Pressure Generation. Suitable For Use With Water/Oil..
Applications: Calibration Labs, Field Calibration, Pressure Gauge Calibration, Pressure Transmitter Calibration..
Supply Scope: 1 Unit Of Calibrator, 3 Nos Reducers (1/4", 1/2", 3/4")..
Range: 0 To 600 Kg/Cm² | Material Of Construction: Ss 304 | Weight: 2.5 Kg Approx..
Features
- Model: DPI-2300 | Features: Dual source of hydraulic pressure and vacuum | Built-in fine adjust vernier | Needle valve provides controlled pressure release | Selector valve for vacuum or pressure generation | Comfortable and ergonomically designed molded handles | Adjustable stroke.
- Range: 0 to 600 Kg/Cm | Material of Construction: SS 304 | Weight: 2.5 Kg Approx.
- Operation: Pressure is generated by the hand operation of the caliper handle which move a piston back and forth resulting in the suction and delivery fluid used for pressure generation. Suitable for use with water/oil.
- Supply Scope: 1 Unit of Calibrator, 3 Nos Reducers (1/4, 1/2, 3/4).
- Applications: Calibration Labs, Field Calibration, Pressure Gauge Calibration, Pressure Transmitter Calibration.
- See more on Amazon...
Brand: INSTRUKART | Manufacturer: INSTRUKART
See On Amazon #5
INSTRUKART High Pressure Hydraulic Hand Pump Calibrator (Range: 0 to 600 Kg/Cm ) with Master Gauge (Winters 0-700 Bar) for Field Calibration, Calibration Labs, Model: AI-DPI-2300
Asin: B0D1R9YBZ4
Operation: Pressure Is Generated By The Hand Operation Of The Caliper Handle Which Move A Piston Back And Forth Resulting In The Suction And Delivery Fluid Used For Pressure Generation. Suitable For Use With Water/Oil..
Applications: Calibration Labs, Field Calibration, Pressure Gauge Calibration, Pressure Transmitter Calibration..
Supply Scope: 1 Unit Of Calibrator, Pressure Gauge (Range: 0 To 700 Bar / 0 To 10152 Psi), 3 Nos Reducers (1/4", 1/2", 3/4"), Instruction Manual And Calibration Certificate Treaceable To National Standards (Nabl).
Model: Dpi-2300 | Range: 0 To 600 Kg/Cm² | Pressure Gauge Range: 0 To 700 Bar | Material Of Construction: Ss 304 | Weight: 2.5 Kg Approx..
Features
- Features: Dual source of Hydraulic pressure and vacuum | Built-in fine adjust vernier | Needle valve provides controlled pressure release | Selector valve for vacuum or pressure generation | Comfortable and ergonomically designed molded handles | Adjustable stroke.
- Model: DPI-2300 | Range: 0 to 600 Kg/Cm | Pressure Gauge Range: 0 to 700 Bar | Material of Construction: SS 304 | Weight: 2.5 Kg Approx.
- Operation: Pressure is generated by the hand operation of the caliper handle which move a piston back and forth resulting in the suction and delivery fluid used for pressure generation. Suitable for use with water/oil.
- Supply Scope: 1 Unit of Calibrator, Pressure gauge (Range: 0 to 700 bar / 0 to 10152 PSI), 3 Nos Reducers (1/4, 1/2, 3/4), Instruction Manual and Calibration Certificate Treaceable to National Standards (NABL)
- Applications: Calibration Labs, Field Calibration, Pressure Gauge Calibration, Pressure Transmitter Calibration.
- See more on Amazon...
Brand: INSTRUKART | Manufacturer: INSTRUKART
See On Amazon #6
Low Pressure Pump Calibrator for HVAC, Laboratories, Pharmaceuticals Monitoring, Filter Monitoring. | Model: IK-LPP-01
Asin: B0CZDWH7N8
Master Connection:4Mm Push Fit Hose To 1/4” Bsp (F) | Dimensions: 206 X 48 X 26 Mm (H X W X D) | Weight: 600 Grams Approx..
Applications: Hvac, Laboratories, Pharmaceuticals Monitoring, Filter Monitoring..
Supply Scope: 1 Unit Of Ik-Lpp-01 Low Pressure Pump Calibrator, Swivel Adapter (6Mm Legris To 1/4” Bsp(F)), 6Mm Put Hose (1 Meter) And Instruction Manual.
Maximum Range: 1 Bar | Medium: Air | Material Of Construction: Brass- Electroless Ni Plating | Vernier-Fine Adjustment : Micro - Adjustable, Volume.
Features
- Fine Adjustment of Pressure: 1000 mBar (1Bar), Vacuum: 300 mBar (-0.3 bar)
- Maximum Range: 1 Bar | Medium: Air | Material of Construction: Brass- Electroless Ni Plating | Vernier-Fine adjustment : Micro - adjustable, Volume
- Master Connection:4mm push fit hose to 1/4 BSP (F) | Dimensions: 206 X 48 X 26 mm (H X W X D) | Weight: 600 Grams Approx.
- Supply Scope: 1 Unit of IK-LPP-01 Low Pressure Pump Calibrator, Swivel Adapter (6mm legris to 1/4 BSP(F)), 6mm PUT Hose (1 Meter) and Instruction Manual
- Applications: HVAC, Laboratories, Pharmaceuticals Monitoring, Filter Monitoring.
- See more on Amazon...
Brand: INSTRUKART | Manufacturer: INSTRUKART
See On Amazon #7
Hand Operated Pneumatic Pressure and Vacuum Pump Calibrator for Calibration Labs, Field Calibration and Pressure Transmitter Calibration (AI-DP1-2300 Only Hand Pump)
Asin: B0CW32DGJC
Operation: Pressure Is Generated By The Hand Operation Of The Caliper Handle Which Move A Piston Back And Forth Resulting In The Suction And Delivery Fluid Used For Pressure Generation. Suitable For Use With Water/Oil..
Applications: Calibration Labs, Field Calibration, Pressure Gauge Calibration, Pressure Transmitter Calibration..
Supply Scope: 1 Unit Of Calibrator, 3 Nos Reducers (1/4", 1/2", 3/4")..
Range: 0 To 600 Kg/Cm² | Material Of Construction: Ss 304 | Weight: 2.5 Kg Approx..
Features
- Model: DPI-2300 | Features: Dual source of hydraulic pressure and vacuum | Built-in fine adjust vernier | Needle valve provides controlled pressure release | Selector valve for vacuum or pressure generation | Comfortable and ergonomically designed molded handles | Adjustable stroke.
- Range: 0 to 600 Kg/Cm | Material of Construction: SS 304 | Weight: 2.5 Kg Approx.
- Operation: Pressure is generated by the hand operation of the caliper handle which move a piston back and forth resulting in the suction and delivery fluid used for pressure generation. Suitable for use with water/oil.
- Supply Scope: 1 Unit of Calibrator, 3 Nos Reducers (1/4, 1/2, 3/4).
- Applications: Calibration Labs, Field Calibration, Pressure Gauge Calibration, Pressure Transmitter Calibration.
- See more on Amazon...
Brand: INSTRUKART | Manufacturer: INSTRUKART
See On Amazon #8
High Pressure Hydraulic Hand Pump Calibrator (Range: 0 to 600 Kg/Cm ) for Field Calibration, Calibration Labs Model: AI-DPI-2300 (Only Hand Pump Calibrator)
Asin: B0CPDW28N1
Operation: Pressure Is Generated By The Hand Operation Of The Caliper Handle Which Move A Piston Back And Forth Resulting In The Suction And Delivery Fluid Used For Pressure Generation. Suitable For Use With Water/Oil..
Applications: Calibration Labs, Field Calibration, Pressure Gauge Calibration, Pressure Transmitter Calibration..
. Supply Scope: 1 Unit Of Calibrator, 3 Nos Reducers (1/4", 1/2", 3/4")..
Range: 0 To 600 Kg/Cm² | Material Of Construction: Ss 304 | Weight: 2.5 Kg Approx..
Features
- Model: DPI-2300 | Features: Dual source of hydraulic pressure and vacuum | Built-in fine adjust vernier | Needle valve provides controlled pressure release | Selector valve for vacuum or pressure generation | Comfortable and ergonomically designed molded handles | Adjustable stroke.
- Range: 0 to 600 Kg/Cm | Material of Construction: SS 304 | Weight: 2.5 Kg Approx.
- Operation: Pressure is generated by the hand operation of the caliper handle which move a piston back and forth resulting in the suction and delivery fluid used for pressure generation. Suitable for use with water/oil.
- . Supply Scope: 1 Unit of Calibrator, 3 Nos Reducers (1/4, 1/2, 3/4).
- Applications: Calibration Labs, Field Calibration, Pressure Gauge Calibration, Pressure Transmitter Calibration.
- See more on Amazon...
Brand: INSTRUKART | Manufacturer: INSTRUKART
See On Amazon #9
Differential Pressure Gauge Calibrator for HVAC, Laboratories, Room Pressure Monitoring Model: IK HPP-01
Asin: B0BFX75RGT
Approximate Volume: 400 C.C | Maximum Pressure: 30 Psig | Maximum Vacuum: 70% Atmospheric Pressure | Wetted Parts: Anodized Aluminum | Adjustment: Coarse & Fine Control.
Supply Scope: 1 Unit Of Differential Pressure Gauge Calibrator And Instruction Manual | Applications: Hvac, Laboratories, Room Pressure Monitoring, Filter Monitoring..
Portable Digital Master Online Electronic Pressure Digital Psi Manometers Test Meter Gauges |Differential Dp Low Pressure Pump Sensor Gauge Calibrator.
Outlet Connections: 4 Ferrule-Less Union Connections | Size: 200(L) X 85 Dia Mm.
Pressure Range: Upto 1 Bar | Vacuum Range: Upto 400 Mm.H.G | Pressure Ports: 2 Pressure Ports With Ferrule Fitting, 1 Each For Master Gauge & Instrument Under Calibration.
Features
- Calibrator: Static Pressure Pump Calibrator (IK HPP-01) | Knobs: 2 No. s for Fine & Coarse Pressure Adjustment
- Pressure Range: Upto 1 Bar | Vacuum Range: Upto 400 mm.H.g | Pressure Ports: 2 Pressure Ports with Ferrule Fitting, 1 Each for Master Gauge & Instrument Under Calibration
- Approximate Volume: 400 C.C | Maximum Pressure: 30 PSIG | Maximum Vacuum: 70% Atmospheric Pressure | Wetted Parts: Anodized Aluminum | Adjustment: Coarse & Fine control
- Outlet Connections: 4 Ferrule-less Union Connections | Size: 200(L) X 85 dia mm
- Supply Scope: 1 Unit of Differential Pressure Gauge Calibrator and Instruction Manual | Applications: HVAC, Laboratories, Room Pressure Monitoring, Filter Monitoring.
- Portable digital Master Online electronic pressure digital psi Manometers test Meter gauges |differential dp low pressure pump sensor gauge calibrator
- See more on Amazon...
Brand: INSTRUKART | Manufacturer: INSTRUKART
Weight: 2.20 pounds
See On Amazon #10
Differential Pressure Gauge Calibrator for HVAC, Laboratories, Room Pressure Monitoring Model: IK HPP-01
Asin: B0B691CTVX
Brand: Ace Instruments | Manufacturer: Ace Instruments
Weight: 1.98 Pounds
See On Amazon
Looking For Something Else?
Search