AZXYI Silicone Suction Cup Phone Mount, Magnetic Silicone Suction Phone Case Stand, Hands Free Mirror Shower Phone Holder, Perfect for Selfies and Videos Creators (Light Pink)
Asin: B0CZLPJLD2 | Model: AZXYIMag001 | PartNumber: AZXYIMag001 | Ean: 0786194334670 | UPC: 786194334670
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Hands-Free & Adhere To Mirrors】This Silicone Suction Phone Case Adhesive Mount Allows You To Stick Your Phone To The Mirror Easily. No Longer Holding Your Phone In One Hand To Watch Video Tutorials While Making Up..
【Other Attractive Use Scenarios】You Can Enjoy The Shower Time With The Phone Adhered To The Tile At Eye-Level. And You Can Enjoy A Video Call Or Social Media With The Phone Adhered To The Tile During The Meal Preparation Time. You Can Also Apply It To The Power Bank So That Your Phone And The Bank Is Tightly Linked Together, Say Goodbye To The Tangled Wires..
【Remove The Suction Cup Phone After Use】Please Remove The Suction Cup Phone Mount After Use. Suction Cups Can Lose Their Adsorption Force Gradually Over Long Periods Of Continuous Use Or Non-Use Due To Various Factors Like Dust, Dirt, Moisture..
【Friendly To Content Creators】If You Are A Content Creator Or An Online Influencer, You Can Create Videos Anywhere With This Suction Mount Completely Hands Free With This Silicone Cell Phone Mount For Cases..
【Press Down Firmly Every 30 Minutes】Use Your Palm Or Fingers To Press The Phone Down Firmly And Check It's Secure Before Letting Go. Apply Even Pressure For A Few Seconds To Allow The Suction Cup To Adhere Properly. To Maintain The Grip And Prevent Accidental Falls, It's A Good Practice To Periodically Reapply Pressure To The Suction Cup..
【A Strong Grip On The Smooth Surface】19 Upgraded Strong And Reliable Individual Suction Cups, Each 13Mm In Diameter. You Can Easily Hang Your Phone Anywhere With A Smooth Surface. All You Do Is You Clean Off Your Phone Or Your Case. It Is Sturdy And It Not Only Sticks To Mirrors, It Also Sticks To Windows, Refrigerators, Tiles And Other Clean, Flat Surfaces..
Features
- Silicone Suction Phone Case Mount for Magsafe This magnetic silicone suction cup phone holder is designed sepecially for Magsafe. Built-in 17 upgraded N52 super magnets ring, attach once touch just like your Magsafe charger. You can easilly attach it on your MagSafe-enabled phone, MagSafe phone case, or Magsafe metal ring that comes with our product.
- A Strong Grip on the Smooth Surface 19 upgraded strong and reliable individual suction cups, each 13mm in diameter. You can easily hang your phone anywhere with a smooth surface. All you do is you clean off your phone or your case. It is sturdy and it not only sticks to mirrors, it also sticks to windows, refrigerators, tiles and other clean, flat surfaces.
- HANDS-FREE & Adhere to Mirrors This silicone suction phone case adhesive mount allows you to stick your phone to the mirror easily. No longer holding your phone in one hand to watch video tutorials while making up.
- Press Down Firmly Every 30 Minutes Use your palm or fingers to press the phone down firmly and check it's secure before letting go. Apply even pressure for a few seconds to allow the suction cup to adhere properly. To maintain the grip and prevent accidental falls, it's a good practice to periodically reapply pressure to the suction cup.
- Remove the Suction Cup Phone after Use Please remove the suction cup phone mount after use. Suction cups can lose their adsorption force gradually over long periods of continuous use or non-use due to various factors like dust, dirt, moisture.
- Friendly to Content Creators If you are a content creator or an online influencer, you can create videos anywhere with this suction mount completely hands free with this silicone cell phone mount for cases.
- Other Attractive Use Scenarios You can enjoy the shower time with the phone adhered to the tile at eye-level. And you can enjoy a video call or social media with the phone adhered to the tile during the meal preparation time. You can also apply it to the power bank so that your phone and the bank is tightly linked together, say goodbye to the tangled wires.
- See more on Amazon...
Brand: AZXYI | Manufacturer: AZXYI
Dimensions: 0.39 x 2.76 x 2.76 inches | Weight: 0.09 pounds
Warranty: 1-year warranty
See On Amazon Similar To AZXYI Silicone Suction Cup Phone
#1
AZXYI Very High Bond Sticky Adhesive, 6 Pack Dashboard Pad Mounting Disk Adhesive Replacement Kit, Double-Sided Stickers for Suction Cup Dashboard Phone Holder & Windshield Car Mount
Asin: B08BCQJDS4 | Model: AZXYI-6DR | PartNumber: AZXYI-6DR | Ean: 0717066347191, 0723258197840 | UPC: 717066347191, 723258197840
【Cut Into Any Size You Need & Compatible With Suction Base】You Can Cut Pads Into Smaller Pieces If Need. Compatible With Most Suction Cup Dashboard Mount And Other Windshield Long Arm Mount, Gps Holder, Ez Pass/I-Pass/Sunpass Holder, Camera Mount, Etc, Wireless Charger Base, Dash Camera Mount Holder Etc On The Market..
【Very High Bond & Easy To Remove】These High-Strength, Double-Sided Adhesive Pads Let You Quickly And Easily Create A Long-Lasting Bond, Bonding Almost Instantly With No Drying Time. It Also Resists Heat And Moisture, And Protects Adhesive Surfaces Against Scratches, Easy Peels Off Without Leaving Any Sticky Residue Behind..
【Easy To Install】Provided Rounded Rectangle Raised Label To Easily Peel Off The Red Release Film Of The Adhesive Pads. When Using, First Easily Peel Off The White Release Film, Stick The Adhesive To The Dashboard Pad Mounting Disk Or To The Suction Cup Base Directly, Then Peel Off The Other Red Side Film And Stick To Your Car Dashboard. Press Down Repeatedly To Increase The Contact Of The Adhesive With The Substrate. Please Wait 24 Hours To Use..
【Easy To Use】To Maximize Adhesive Contact, Please Clean The Adhesive Surface Before Use And Let It Dry, Free Of Contaminates. And Wait At Least 24 Hours To Use After Stuck. First Peel Off The White Side Of The Adhesive And Stick It To The Car Mount Base. After Applying Some Pressure On The Adhesive, Peel Off The Red Film Side Of The Adhesive And Stick The Car Mount To Your Dashboard/ Windshield..
Features
- 6Pcs Clear Adhesives Replacement AZXYI offers 6 Pcs round clear sticky adhesive pads(Diameter: 80mm,3.15") for attaching dashboard pad mounting disk of your suction cup dashboard phone mount. You can also adhere the transparent adhesive to the suction cup directly, not affecting the look of the suction cup.
- Easy to Use To maximize adhesive contact, please clean the adhesive surface before use and let it dry, free of contaminates. And wait at least 24 hours to use after stuck. First peel off the white side of the adhesive and stick it to the car mount base. After applying some pressure on the adhesive, peel off the red film side of the adhesive and stick the car mount to your dashboard/ windshield.
- Cut into any size you need & Compatible With Suction Base You can cut pads into smaller pieces if need. Compatible with most suction cup dashboard mount and other windshield long arm mount, GPS holder, EZ Pass/I-Pass/SunPass holder, camera mount, ETC, wireless charger base, dash camera mount holder etc on the market.
- Easy to Install Provided rounded rectangle raised label to easily peel off the red release film of the adhesive pads. When using, first easily peel off the white release film, stick the adhesive to the dashboard pad mounting disk or to the suction cup base directly, then peel off the other red side film and stick to your car dashboard. Press down repeatedly to increase the contact of the adhesive with the substrate. please wait 24 HOURS to use.
- Very High Bond & Easy to Remove These high-strength, double-sided adhesive pads let you quickly and easily create a long-lasting bond, bonding almost instantly with no drying time. It also resists heat and moisture, and protects adhesive surfaces against scratches, easy peels off without leaving any sticky residue behind.
- See more on Amazon...
Brand: AZXYI | Manufacturer: AZXYI
Dimensions: 0.04 x 3.15 x 3.15 inches | Weight: 0.07 pounds
See On Amazon #2
AZXYI Sticky Adhesive Replacement for Windshield Camera Holder, 6pcs 2.76"(70mm) VHB Circle Double-Sided Adhesive Tapes for Dashboard Suction Cup Mount, Mounting Disk Pads, Dash Cam/GPS/Sucker Holder
Asin: B08ZS1TVQ2 | Model: OULISHEN-OU6T7DR | PartNumber: OULISHEN-OU6T7DR | Ean: 0723258197857 | UPC: 723258197857
【Cut Into Any Size You Need & Compatible With Suction Base】You Can Cut Pads Into Smaller Pieces If Need. Compatible With Most Suction Cup Dashboard Mount And Other Windshield Long Arm Mount, Gps Holder, Ez Pass/I-Pass/Sunpass Holder, Camera Mount, Etc, Wireless Charger Base, Dash Camera Mount Holder Etc On The Market..
【Very High Bond & Easy To Remove】These High-Strength, Double-Sided Adhesive Pads Let You Quickly And Easily Create A Long-Lasting Bond, Bonding Almost Instantly With No Drying Time. It Also Resists Heat And Moisture, And Protects Adhesive Surfaces Against Scratches, Easy Peels Off Without Leaving Any Sticky Residue Behind..
【Easy To Install】Provided Rounded Rectangle Raised Label To Easily Peel Off The Red Release Film Of The Adhesive Pads. When Using, First Easily Peel Off The White Release Film, Stick The Adhesive To The Dashboard Pad Mounting Disk Or To The Suction Cup Base Directly, Then Peel Off The Other Red Side Film And Stick To Your Car Dashboard. Press Down Repeatedly To Increase The Contact Of The Adhesive With The Substrate. Please Wait 24 Hours To Use..
【6Pcs Clear Adhesives Replacement】We Offer 6 Pcs Round Clear Sticky Adhesive Pads(Diameter: 70Mm, 2.75") For Attaching Dashboard Pad Mounting Disk To Your Car Dashboard . You Can Also Adhere The Transparent Adhesive To The Suction Cup Directly, Not Affecting The Look Of The Suction Cup..
Features
- Strong Sticky Adhesive These extra strong both side clear adhesion pads' stickiness is 40% stronger than ordinary adhesive. The heat resistant performance of these circle adhesive double-sided mounting adhesive tapes for dash cam mount reaches 120 C+, you can use it without worry in hot Summer. Easy to fix on your car phone socket base, or heavy duty dashboard mount base, you can drive uber, truck, vehicle security in bumpy roads.
- 6Pcs Clear Adhesives Replacement We offer 6 Pcs round clear sticky adhesive pads(Diameter: 70mm, 2.75) for attaching dashboard pad mounting disk to your car dashboard . You can also adhere the transparent adhesive to the suction cup directly, not affecting the look of the suction cup.
- Cut into any size you need & Compatible With Suction Base You can cut pads into smaller pieces if need. Compatible with most suction cup dashboard mount and other windshield long arm mount, GPS holder, EZ Pass/I-Pass/SunPass holder, camera mount, ETC, wireless charger base, dash camera mount holder etc on the market.
- Easy to Install Provided rounded rectangle raised label to easily peel off the red release film of the adhesive pads. When using, first easily peel off the white release film, stick the adhesive to the dashboard pad mounting disk or to the suction cup base directly, then peel off the other red side film and stick to your car dashboard. Press down repeatedly to increase the contact of the adhesive with the substrate. please wait 24 HOURS to use.
- Very High Bond & Easy to Remove These high-strength, double-sided adhesive pads let you quickly and easily create a long-lasting bond, bonding almost instantly with no drying time. It also resists heat and moisture, and protects adhesive surfaces against scratches, easy peels off without leaving any sticky residue behind.
- See more on Amazon...
Brand: AZXYI | Manufacturer: OULISHEN_Made
Dimensions: 2.76 x 2.76 x 0.04 inches | Weight: 0.01 pounds
See On Amazon #3
6 Pack 53mm(2.09inch) Adhesives for Suction Cup Replacement, AZXYI Windshield Mount Adhesive Replacement Kit, Compatible with Mounting Disk, GPS Dash Cam and Socket Car Dashboard Suction Cup Mount
Asin: B08SHHXL3W | Model: AZXYI-6MRT | PartNumber: AZXYI-6MRT | Ean: 0049500533526 | UPC: 049500533526
【Work As Wireless Charger Mount】The Strong Adhesion Of These Sticker Pads Help Firmly Lock The Wireless Charger Into The Needed Place, Allow Your Phone Easily Separated From The Charger With One Hand After Charging, And Protect Your Charger From Possible Falling Damage..
【Durability】These Double-Sided Stickers Roll With Pressure Sensitive Adhesive Bonds Almost Instantly With No Drying Time. It Also Resists Heat And Moisture, And Protects Adhesive Surfaces Against Scratches, Easy Peels Off Without Leaving Any Sticky Residue Behind..
【Very High Bond】These High-Strength, Double-Sided Adhesive Pads Let You Quickly And Easily Create A Long-Lasting Bond Attaching Various Surfaces Wherever You Want, Like Car Dashboard, Office, Kitchen, Bedroom, Mirrors, Glasses, Nightstand And More..
【Easy To Use】To Maximize Adhesive Contact, Please Clean The Adhesive Surface Before Use And Let It Dry, Free Of Contaminates. And Wait At Least 24 Hours To Use After Stuck. First Peel Off The White Side Of The Adhesive And Stick It To The Car Mount Base. After Applying Some Pressure On The Adhesive, Peel Off The Red Film Side Of The Adhesive And Stick The Car Mount To Your Dashboard/ Windshield..
Features
- 6Pcs Adhesives Replacement for Suction Cup Mount AZXYI offers 6 Pcs round sticky adhesive pads(Diameter: 53mm,2.09") , which can help to fix your Garmin GPS mount, Phone mount, or Dash Cam Suction Cup Mount when your sucker is not strong enough and fall off often. Try AZXYI super suction cup adhesive replacement for lock sucker. Never fall again!
- Easy to Use To maximize adhesive contact, please clean the adhesive surface before use and let it dry, free of contaminates. And wait at least 24 hours to use after stuck. First peel off the white side of the adhesive and stick it to the car mount base. After applying some pressure on the adhesive, peel off the red film side of the adhesive and stick the car mount to your dashboard/ windshield.
- Work as Wireless Charger Mount The strong adhesion of these sticker pads help firmly lock the Wireless Charger into the needed place, allow your phone easily separated from the charger with one hand after charging, and protect your charger from possible falling damage.
- Very High Bond These high-strength, double-sided adhesive pads let you quickly and easily create a long-lasting bond attaching various surfaces wherever you want, like car dashboard, office, kitchen, bedroom, mirrors, glasses, nightstand and more.
- Durability These Double-sided stickers roll with pressure sensitive adhesive bonds almost instantly with no drying time. It also resists heat and moisture, and protects adhesive surfaces against scratches, easy peels off without leaving any sticky residue behind.
- See more on Amazon...
Brand: AZXYI | Manufacturer: AZXYI
Dimensions: 4.13 x 5.91 x 0.39 inches | Weight: 0.04 pounds
See On Amazon #4
6 Pack Adhesives for Suction Cup Mount, AZXYI 53mm(2.09inch) Sticky Adhesive Replacement Kit, Compatible with Car Dashboard Pad Mounting Disk, GPS Dash Cam Suction Cup Mount and Socket Mount
Asin: B08RCJ5489 | Model: AZXYI-6MR | PartNumber: AZXYI-6MR | Ean: 0046432679087 | UPC: 046432679087
【A Great Addition For Wireless Charger】The Strong Adhesion Of These Sticker Pads Help Firmly Lock The Wireless Charger Into The Needed Place, Allow Your Phone Easily Separated From The Charger With One Hand After Charging, And Protect Your Charger From Possible Falling Damage..
【Durability】These Double-Sided Stickers Roll With Pressure Sensitive Adhesive Bonds Almost Instantly With No Drying Time. It Also Resists Heat And Moisture, And Protects Adhesive Surfaces Against Scratches, Easy Peels Off Without Leaving Any Sticky Residue Behind..
【Very High Bond】These High-Strength, Double-Sided Adhesive Pads Let You Quickly And Easily Create A Long-Lasting Bond Attaching Various Surfaces Wherever You Want, Like Car Dashboard, Car Dash, Windshield & Desktop..
【Easy To Use】To Maximize Adhesive Contact, Please Clean The Adhesive Surface Before Use And Let It Dry, Free Of Contaminates. And Wait At Least 24 Hours To Use After Stuck. First Peel Off The White Side Of The Adhesive And Stick It To The Car Mount Base. After Applying Some Pressure On The Adhesive, Peel Off The Red Film Side Of The Adhesive And Stick The Car Mount To Your Car Dashboard Or Windshield..
Features
- 6Pcs Adhesives Replacement for Suction Cup Mount AZXYI offers 6 Pcs round sticky adhesive pads(Diameter: 53mm,2.09") , which can help to fix your Garmin GPS mount, Phone mount, or Dash Cam Suction Cup Mount when your sucker is not strong enough and fall off often. Try AZXYI super adhesive for lock sucker. Never fall again!
- Easy to Use To maximize adhesive contact, please clean the adhesive surface before use and let it dry, free of contaminates. And wait at least 24 hours to use after stuck. First peel off the white side of the adhesive and stick it to the car mount base. After applying some pressure on the adhesive, peel off the red film side of the adhesive and stick the car mount to your car dashboard or windshield.
- A Great Addition for Wireless Charger The strong adhesion of these sticker pads help firmly lock the Wireless Charger into the needed place, allow your phone easily separated from the charger with one hand after charging, and protect your charger from possible falling damage.
- Very High Bond These high-strength, double-sided adhesive pads let you quickly and easily create a long-lasting bond attaching various surfaces wherever you want, like car dashboard, Car Dash, Windshield & Desktop.
- Durability These Double-sided stickers roll with pressure sensitive adhesive bonds almost instantly with no drying time. It also resists heat and moisture, and protects adhesive surfaces against scratches, easy peels off without leaving any sticky residue behind.
- See more on Amazon...
Brand: AZXYI | Manufacturer: AZXYI
Dimensions: 4.72 x 5.91 x 0.39 inches
See On Amazon #5
DOKOJU 4 Dashboard Mounting Disk for Suction Cup Holders-Large Size Ultra-Strong Adhesive(2.99in)-Fit for Dashboard,Windshield,Car Phone Mount Base,Dash Cam,GPS Car Mount-3 Pack
Asin: B0C2PPHT6G
🔘【Extreme Temperature Resistance】Our Dokoju Dashboard Mounting Pad Offer Exceptional Heat Resistance Up To 80°C (176°F) And Cold Resistance Down To -20°C (-4°F), Ensuring Reliable Performance In Both Hot And Cold Environments. These Mats Are Designed To Withstand The Sun's Heat Without Melting And Remain Durable Even In Freezing Conditions. Compatible With Most Suction Cup Mounts, They Are Suitable For Trucks, Cars, And Any Vehicle Navigating Bumpy Roads..
🔘【Smooth Surface】One Side Is Adhesive, While The Other Side Has A Smooth Surface, Providing A Smooth Glass-Like Surface For The Base Of The Suction Cup Car Mount, Enabling It To Work More Effectively.❤️.
🔘【Package Includes】Each Pack Contains 3 Adhesive Pads..
🔘【Easy To Install And Remove】Simply Peel Off The Film Using The Raised Tabs, Press The Sticky Pads For Car Dashboard Firmly Onto Your Dashboard To Reinforce The Connection (❤️ Requires Wiping The Connection Surface) And Wait For At Least 1 Hour Before Using (24 Hours Resting Time Is Best). When You Need To Remove The Dash Pad, Simply Slowly Pull Up The Small Tail Of The Dashboard Liner..
🔘【Powerful Suction 】Our Dokoju Highly Adhesive Dashboard Pad Mounting Disk Seamlessly Attaches To Slightly Curved, Tiled, Or Uneven Surfaces. Provides Exceptional Protection For Your Dashboard And Extends The Life Of The Suction Cup Mount..
Features
- Wide Compatibility Our premium extra-large sticky mounting plate (76mm/2.99in) fits any suction gadgets, offering versatile use on dashmats, windshields, and more. Say goodbye to falling suckers! Perfect for grab bars, dash cam, desktop, GPS mount, car tablet stands, and more. ( please refer to the sizes strictly)
- Powerful Suction Our DOKOJU highly adhesive Dashboard Pad Mounting disk seamlessly attaches to slightly curved, tiled, or uneven surfaces. Provides exceptional protection for your dashboard and extends the life of the suction cup mount.
- Extreme Temperature Resistance Our DOKOJU dashboard mounting pad offer exceptional heat resistance up to 80 C (176 F) and cold resistance down to -20 C (-4 F), ensuring reliable performance in both hot and cold environments. These mats are designed to withstand the sun's heat without melting and remain durable even in freezing conditions. Compatible with most suction cup mounts, they are suitable for trucks, cars, and any vehicle navigating bumpy roads.
- Easy to Install and Remove Simply peel off the film using the raised tabs, press the sticky pads for car dashboard firmly onto your dashboard to reinforce the connection ( requires wiping the connection surface) and wait for at least 1 hour before using (24 hours resting time is best). When you need to remove the dash pad, simply slowly pull up the small tail of the dashboard liner.
- Smooth Surface One side is adhesive, while the other side has a smooth surface, providing a smooth glass-like surface for the base of the suction cup car mount, enabling it to work more effectively.
- Package Includes Each pack contains 3 adhesive pads.
- See more on Amazon...
Brand: DOKOJU | Manufacturer: DOKOJU
Dimensions: 0.44 x 2.99 x 3.89 inches | Weight: 0.11 pounds
See On Amazon
Looking For Something Else?
Search