MEUS Racing TRX4M Axles Portal Front & Rear Axle Set +8mm Ground Clearance for TRX4M Defender/Bronco/K10/F150 1/18 RC Crawler Car(Version 2.0)
Asin: B0D14HS837
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Portal Axle Structure With Built-In Metal Gear, Provides Up To 25% Reduction(Ratio 1.25:1) And 8Mm Ground Clearance For Excellent Climbing Performance..
Adjustable C-Hub Supports 0° And 14° Angle Adjustment, Rear Axle Feartures Holes To Fasten Linking Rods,Support Lay Down Servo Mount And Original Vertical Servo Mount..
This Upgraded Version Has The Same Width As Stock Steering Rods, Supports Vertical Servo Mount With Stock Rods..
Made Of High Quality Brass And Aluminum Alloy, The Front Axle Comes With Brass C-Hub And Steering Knuckle To Provide Proper Weight And Great Stablity..
Features
- Premium TRX4M upgrades for TRX4M Defender/Bronco/K10/F150 1/18 RC Crawler Car.
- Made of high quality brass and aluminum alloy, The front axle comes with brass C-hub and steering knuckle to provide proper weight and great stablity.
- Portal axle structure with built-in metal gear, provides up to 25% reduction(ratio 1.25:1) and 8mm ground clearance for excellent climbing performance.
- This upgraded version has the same width as stock steering rods, supports vertical servo mount with stock rods.
- Adjustable C-hub supports 0 and 14 angle adjustment, rear axle feartures holes to fasten linking rods,support lay down servo mount and original vertical servo mount.
- See more on Amazon...
Brand: MEUS RACING | Manufacturer: MEUS RACING
Dimensions: 5.00 x 3.00 x 1.50 inches
See On Amazon Similar To MEUS Racing TRX4M Axles Portal
#1
INJORA Front&Rear Axles Set - +4mm Extended Aluminum Complete Axles for TRX4M Upgrade 1/18 RC Crawler Car
Asin: B0CFDMKTVF | Model: 4M-61FR | PartNumber: 4M-61FR
[Upgrade Accessories] Come With Hardened Cvd Shafts, Steel 12/24T Gears, 5Mm(+1Mm) Brass Wheel Hexes And Nuts..
[Wide Application] Designed Specifically For Trx4m Bronco Defender K10 High Trai 1/18 Rc Crawler. Note：As The Axle Housings Are Extended, So They Are Not Compatible With Original Trx4m Size Steering Links And Dogbone Shafts..
[Pre Assembly] Pre-Assembled Make Installation More Simpler, Coming With All Hardware For The Axles..
[Unique Design] +4Mm Axles Increase The Width Of Each Side By 4Mm, Increase Total Length By 8 Mm. 4Mm Extended Desgin Provides Better Stability And Climbing Performance..
Features
- [Well Performance] CNC machined and black anodized, excellent workmanship and high precision.
- [Unique design] +4mm axles increase the width of each side by 4mm, increase total length by 8 mm. 4mm extended desgin provides better stability and climbing performance.
- [Upgrade Accessories] Come with Hardened CVD shafts, steel 12/24T gears, 5mm(+1mm) brass wheel hexes and nuts.
- [Pre Assembly] Pre-assembled make installation more simpler, coming with all hardware for the axles.
- [Wide Application] Designed specifically for TRX4M Bronco Defender K10 High Trai 1/18 RC crawler. Note As the axle housings are extended, so they are not compatible with original TRX4M size steering links and dogbone shafts.
- See more on Amazon...
Brand: INJORA | Manufacturer: INJORA
Dimensions: 1.57 x 5.12 x 3.15 inches
See On Amazon #2
MEUS RACING TRX4M Body Ripper Chassis Kit for TRX4M Defender/Bronco/K10/F150 1/18 RC Crawler Car (MEX2-Black)
Asin: B0C968YRJ1 | Model: MEX2-Black | PartNumber: MEX2-Black
Extra Hardwares! One Lay Down Servo Mount Plus Stainless Steering Linkages..
Package Includes Unassembled Kit*1, Screw Kit*1, Instruction*1 And Stickers..
Suitable For Trx4m Defender/Bronco/K10/F150 1/18 Rc Crawler Car..
Designed To Protect Your Rc Crawler From Damages While Crawling, Climbing And Conquering Any Terrains..
Features
- Cockpit design, frosted surface, solid PA66 nylon injection molding body shell with light weight and great toughness.
- Designed to protect your RC crawler from damages while crawling, climbing and conquering any terrains.
- Extra hardwares! One lay down servo mount plus stainless steering linkages.
- Suitable for TRX4M Defender/Bronco/K10/F150 1/18 RC Crawler Car.
- Package includes unassembled kit*1, screw kit*1, instruction*1 and stickers.
- See more on Amazon...
Brand: MEUS RACING | Manufacturer: MEUS RACING
Dimensions: 1.00 x 2.00 x 1.00 Inches
See On Amazon #3
INJORA Front and Rear Complete Axles Set - Stock Length CNC Aluminum Axles for 1/18 RC Crawler TRX4M Upgrade
Asin: B0CLD7QHN9
Includes Brass Wheel Hexes For Enhanced Strength And Stability..
Features Hardened Cvd Shafts And Steel 12/24T Gears For Enhanced Strength And Longevity..
Same Length As Trx4m Stock Axles For Easy Installation And Compatibility..
Pre-Assembled, Coming With All Hardware For The Axles, Excellent Workmanship And High Precision Ensure Reliable Performance..
Features
- CNC machined,black anodized for superior durability and a sleek appearance.
- Pre-assembled, coming with all hardware for the axles, excellent workmanship and high precision ensure reliable performance.
- Includes brass wheel hexes for enhanced strength and stability.
- Same length as TRX4M stock axles for easy installation and compatibility.
- Features hardened CVD shafts and steel 12/24T gears for enhanced strength and longevity.
- See more on Amazon...
Brand: INJORA | Manufacturer: INJORA
See On Amazon #4
MEUS Racing TRX4M Motor and Transmission Dual15.7:1/56.6:1 for TRAXXAS TRX4M 1/18 RC Crawlers Upgrade Part (Black Without Motor)
Asin: B0CNW7W6QZ | Model: TRX4M Transmission | PartNumber: TRX4M Transmission
This Dual Speed Transmission Includes High Speed 15.7:1/Low Speed 56.6:1 To Enable Stabler Driving Performanc Against Diffrent Terrains..
Package Includes Trx4m Transmission Gearbox*1, 87T Motor*1..
Suitable For Trx4m Original Frames Or Other Frames With Large Enough Space (Does Not Fit Meus Ripper Series)..
Support Speed Switch Via Ch3 Or Manual Switch, The Original Remote Controller Doesn't Support Speed Switch Via Ch3.
Features
- Made of high quality aluminum alloy, anodized surface, steel gears, solid and long-lasting.
- Support speed switch via CH3 or manual switch, the original remote controller doesn't support speed switch via CH3
- This dual speed transmission includes high speed 15.7:1/low speed 56.6:1 to enable stabler driving performanc against diffrent terrains.
- Suitable for TRX4M original frames or other frames with large enough space (does not fit MEUS ripper series).
- Package includes TRX4M transmission gearbox*1, 87T motor*1.
- See more on Amazon...
Brand: MEUS RACING | Manufacturer: MEUS RACING
See On Amazon #5
1Pair Vgoohobby Steel Front CVD Axle Shaft Portal Drive Input Gear Compatible with Traxxas TRX-4 1/10 RC Crawler Car
Asin: B095WVVXV2 | Model: XZ197 | PartNumber: XZ197 | Ean: 0757842351301 | UPC: 757842351301
Length: 67Mm And 93.5Mm..
East To Install And Remove.A Good Choice To Replace The Old Front Cvd Shaft..
1Pair=Left + Right Axle,Total 2 Pieces Trx4 Portal Axles.
Cnc Machined For Precision,Durable In Use..
Features
- The front CVD drive shaft compatible with Traxxas TRX-4 1/10 rc crawler car.
- CNC machined for precision,durable in use.
- Length: 67mm and 93.5mm.
- 1Pair=Left + Right axle,total 2 pieces trx4 portal axles
- East to install and remove.A good choice to replace the old front CVD shaft.
- See more on Amazon...
Brand: Vgoohobby | Manufacturer: Vgoohobby
See On Amazon #6
Que-T Front CVD Axle Shaft Set Portal Drive Input Gear for 1/10 RC TRX-4
Asin: B07Y53ZTVH | Ean: 0600607246414 | UPC: 600607246414
These Are An Excellent Upgrade To Beef Up Your Trx-4 Driveline..
High Quality Materials And Superb Craftsmanship,Sturdy And Durable..
Material : Steel Metal.
This Includes The Left And Right Axle Set..
Features
- It fit For TRX-4 Front Machined Steel Axle Shafts with Portal Drive Input Gears
- This includes the left and right axle set.
- These are an excellent upgrade to beef up your TRX-4 driveline.
- Material : Steel Metal
- High quality materials and superb craftsmanship,sturdy and durable.
- See more on Amazon...
Brand: QUE-T | Manufacturer: Que-T
See On Amazon #7
MEUS RACING TRX4M Driveshaft Front and Rear Universal Drive Shaft for 1/18 TRX4M TRX-4M Bronco Defender RC Crawler Upgrade Parts Accessories
Asin: B0BXX94D6T | Model: MEUS230309 | PartNumber: MEUS230309
Spline Coupling Design With Higher Transmission Torque And Less Deformation..
Perfect As Replacement For The Stock Plastic Parts For 1/18 Trx4m Bronco Defender Rc Crawler..
Upgraded Version Comes With Stabler Connection And Movable Brass Beads Which Reduces The Clearance, Ensures Less Shaking..
Universal Joint Style With Higher Load Capacity And Larger Drive Angle..
Features
- Made of hardened steel to provide greater stability and smoother transmission while driving.
- Universal joint style with higher load capacity and larger drive angle.
- Spline coupling design with higher transmission torque and less deformation.
- Upgraded version comes with stabler connection and movable brass beads which reduces the clearance, ensures less shaking.
- Perfect as replacement for the stock plastic parts for 1/18 TRX4M Bronco Defender RC Crawler.
- See more on Amazon...
Brand: MEUS RACING | Manufacturer: MEUS RACING
Dimensions: 0.20 x 1.00 x 0.20 inches
See On Amazon #8
MEUS RACING TRX4M Transmission Gear Set 16.6:1 TRX4M Upgrade Parts for TRX4M Defender, Bronco, K10 High Trail, F150
Asin: B0BS6H4MX1 | Model: MEUS2311202 | PartNumber: MEUS2311202
Suitable For Trx4m Defender, Bronco, K10 High Trail, F150 Etc...
Ackage Includes Gears*4, 3X6×2.5 Bearings*6, 3×16 Pins*2;.
Same Ratio 16.6:1 As Stock Gear # 9776, Perfect As Replacemetn For #9776.
Bolt On Installation, Perfectly Matches With The Stock Gearbox..
Features
- Made of high quality steel and precisely CNC machined for greater durability and hardness.
- Bolt on installation, perfectly matches with the stock gearbox.
- Suitable for TRX4M Defender, Bronco, K10 High Trail, F150 etc..
- Same ratio 16.6:1 as stock gear # 9776, perfect as replacemetn for #9776
- ackage includes gears*4, 3x6 2.5 bearings*6, 3 16 pins*2;
- See more on Amazon...
Brand: MEUS RACING | Manufacturer: MEUS RACING
Dimensions: 0.40 x 1.00 x 0.70 inches
See On Amazon #9
MEUS Racing Wheelbase Extended Thread Dogbone +4MM CVD Front and Rear Axle Drive Shafts for 1/18 TRX4M Axles Replacement Upgrade
Asin: B0CFXNVLV7
+4Mm At Each Side Wheels , More Stable Vehicle Driving..
Suitable For Trx4m 1/18 Rc Crawler Car.
Easy To Install And Replace #9756 #9754 #9753 #9729 #9730 Original Parts;.
This Is A Cnc Machined Part With Precise Data, Each Part Is Perfectly Matched With The Original Car;.
Features
- This CVD is made of high quality steel and high temperature hard treatment, sturdy and durable;
- This is a CNC machined part with precise data, each part is perfectly matched with the original car;
- +4mm at each side wheels , more stable vehicle driving.
- Easy to install and replace #9756 #9754 #9753 #9729 #9730 original parts;
- Suitable for TRX4M 1/18 RC Crawler Car
- See more on Amazon...
Brand: MEUS RACING | Manufacturer: MEUS
See On Amazon
Looking For Something Else?
Search