Imdinnogo Bambu Lab X1 and P1 Series Upgrade Led Light
Asin: B0D1FTW2Y1
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.White Light, Upgraded Led Light Source, Stabilized Constant Current. Create A Comfortable And Even Healthy Spatial Light Sense..
Please Replace It After Power Off. If You Encounter Any Problems, Please Feel Free To Contact Us!.
Compared To The Original Light, This Provides A Very Good Light For Your Working Environment. With The Chamber Camera In The Bambulab, You Can Clearly See The Printing Process, And Remote Control Of The Light Is Also Possible On Bambuhandy..
The Length Of The Wire Is Enough, You Can Arrange The Light Strip Position According To Our Pictures Or According To Your Own Design..
Features
- Upgraded LED chip, energy and power-saving. Good chip and luminous efficiency, low light wane, long service life. Uniform of luminance, soft light.
- The length of the wire is enough, you can arrange the light strip position according to our pictures or according to your own design.
- White light, Upgraded LED light source, stabilized constant current. Create a comfortable and even healthy spatial light sense.
- Compared to the original light, this provides a very good light for your working environment. With the Chamber Camera in the Bambulab, you can clearly see the printing process, and remote control of the light is also possible on BambuHandy.
- Please replace it after power off. If you encounter any problems, please feel free to contact us!
- See more on Amazon...
Brand: Imdinnogo
See On Amazon Similar To Imdinnogo Bambu Lab X1 and
#1
Imdinnogo 3D Printer Platform 257x257mm Dual Side Textured PEI Steel Sheet for Bambulab X1 X1C P1P P1S A1: Strong Adhesion Easy Prints Release Removable and Flexible Spring Build Plate BCZAMD
Asin: B0CRB1WJQX
3. Very Easy To Take Prints: When The Hot Bed Temperature Drops To Room Temperature, Just Gently Pick It Up And Remove It. If The Filament Is Sticky, You Need To Bend The Steel Plate To Remove The Prints..
5. We Not Only Have Double-Sided Pei Steel Plate, But Also Sell Pey+Pei Peo+Pei, If You Need, Please Feel Free To Contact Us!.
4. Compatible With A Variety Of Filaments: Pla, Pla+, Petg, Abs, Etc. You Just Need To Set The Temperature According To The Temperature Required By The Filament, For Example, Pla Is 215 Degrees Celsius For The Nozzle And 30-50 Degrees Celsius For The Heat Bed, While Petg Is 250 Degrees Celsius For The Nozzle And 60-80 Degrees Celsius For The Heat Bed. If You Have Tested The Most Suitable Temperature, We Would Love To Hear From You Professionally..
2. Excellent Adhesion Can Be Achieved When The Temperature Of The Heated Bed Is About 60℃, You Can Print Directly On Each Side Of The Double Sided Pei Sheet Without Using Any Glue Or Other Tools To Help The Model To Stick Onto The Sheet. You Do Not Need To Worry About The Prints Curling With A 60℃ Bed Temperature.It Also Can Print Petg Very Well, But The Temperature Of The Hotbed Needs To Be About 80-85℃..
Features
- 1. Only applicable to: Bambulab X1 X1C P1P P1S A1, not for A1 mini.
- 2. Excellent adhesion can be achieved when the temperature of the heated bed is about 60 , you can print directly on each side of the double sided PEI sheet without using any glue or other tools to help the model to stick onto the sheet. You do not need to worry about the prints curling with a 60 bed temperature.It also can print PETG very well, but the temperature of the hotbed needs to be about 80-85 .
- 3. Very easy to take prints: when the hot bed temperature drops to room temperature, just gently pick it up and remove it. If the filament is sticky, you need to bend the steel plate to remove the prints.
- 4. Compatible with a variety of filaments: PLA, PLA+, PETG, ABS, etc. You just need to set the temperature according to the temperature required by the filament, for example, PLA is 215 degrees Celsius for the nozzle and 30-50 degrees Celsius for the heat bed, while PETG is 250 degrees Celsius for the nozzle and 60-80 degrees Celsius for the heat bed. If you have tested the most suitable temperature, we would love to hear from you professionally.
- 5. We not only have double-sided PEI steel plate, but also sell PEY+PEI PEO+PEI, if you need, please feel free to contact us!
- See more on Amazon...
Brand: Imdinnogo | Manufacturer: Aimengda
Dimensions: 0.02 x 10.12 x 10.12 inches
See On Amazon #2
Wefuit New Upgraded H1H Build Plate for Bambu Lab A1/X1C/X1/X1E/P1P/P1S 3D Printer, Smooth Kaleidoscope+Smooth Skynet Spring Steel Plate Flexible Plate 257x257mm for Bambu 3D Printers
Asin: B0CYLHPN25
【High Resistance And Compatible Filaments】The H1h Print Bed Surface Is Resistant To High Temperature 200°C .After Our Extensive Testing, We Recommend Kaleidoscope+Skynet Build Plate To Print Pla / Tpu /Petg/Abs，If You Want To Print Other Filaments, Please Adjust The Parameters..
【Compatible 3D Printers】The Double-Sided Smooth Kaleidoscope+Smooth Skynet Print Bed Suitable For 3D Printers With 257X257mm Platform Size, Such As Suitable For Bambu Lab X1/X1c/X1e/P1p/P1s/A1. Please Confirm Your 3D Printer Platform Size Before Ordering..
【 Easy To Remove And Use】The Spring Steel Sheet Can Be Bent To Remove The Model Quickly, Without The Help Of Other Tools. And The Plate Will Return To Flatness. Made Of High Quality Spring Steel Plate. Flexible, Removable, High Strength And Heat Resistance, Dual-Side Design, Thicker And More Durable. Easy To Use, Put The Printing Plate Onto The Lab Printer Hot Bed, Then The Print Bed Levelling Will Automatically Go On While Machine Powered On. (The Smooth Surface Has A Factory Protective Film).Please Let The Build Plate Cool Down Before Remove The Model.
【Easy To Maintain】The Skynet Or Kaleidoscope Pattern Of The Printed Model May Fade Or Disappear If Wiped With Hands Or Other Oily Objects, But Don't Worry,You Only Need To Wipe The H1h Surface With A Wet Tissue And Then Wipe Dry It With A Dry Tissue To Keep It Clean. It Will Become As Clean As The First Time You Got It,The Pattern Can Be Reappeared !.
Features
- Kaleidoscope+Skynet build Plate One side is a Kaleidoscope pattern,colorful and ever-changing, rotating unintentionally, emitting a different light.The other side is a Gemini pattern,which is like a large grid that crosses horizontally and vertically, simple and elegant. The bottom of the model will present rich and layered colors at different lighting angles, bringing a dreamy visual effect. The combination of Skynet and Kaleidoscope brings new fun to your 3D printing, adding more interesting inspiration to your creations and immersing you in the fun of 3D printing.
- Easy to Maintain The Skynet or Kaleidoscope pattern of the printed model may fade or disappear if wiped with hands or other oily objects, but don't worry,You only need to wipe the H1H surface with a wet tissue and then wipe dry it with a dry tissue to keep it clean. It will become as clean as the first time you got it,the pattern can be reappeared !
- High Resistance and Compatible Filaments The H1H print bed surface is resistant to high temperature 200 C .After our extensive testing, we recommend Kaleidoscope+Skynet build Plate to print PLA / TPU /PETG/ABS If you want to print other filaments, please adjust the parameters.
- Easy to Remove and use The spring steel sheet can be bent to remove the model quickly, without the help of other tools. And the plate will return to flatness. Made of high quality spring steel plate. Flexible, removable, high strength and heat resistance, dual-side design, thicker and more durable. Easy to use, put the printing plate onto the lab printer hot bed, then the print bed levelling will automatically go on while machine powered on. (The smooth surface has a factory protective film).Please let the build plate cool down before remove the model
- Compatible 3D Printers The double-sided Smooth Kaleidoscope+Smooth Skynet print bed suitable for 3D printers with 257x257mm platform size, such as suitable for Bambu Lab X1/X1C/X1E/P1P/P1S/A1. Please confirm your 3D printer platform size before ordering.
- See more on Amazon...
Brand: Wefuit | Manufacturer: Wefuit
See On Amazon #3
HICTOP Bambu Labs Hotend X1 Carbon Assembly with Removable Hardened Steel 0.4mm Nozzle Hotend for Bambu Labs X1 Series 3D Printers
Asin: B0CLTN33R4
3.The Heat Sink, Throat, Heat Block And The Removable Hardened Steel 0.4Mm Nozzle Are Assembled, You Only Need To Assemble The Ceramic Heater And Thermistor Or Keep Them For Later Use. Please Heat The Nozzle To 250℃ And Tighten It To Avoid Leaking..
5.Please Heat Up The Bambu Labs Hotend To About 260℃ When Changing The Nozzle, It Helps You To Prevent It From Leaking, Please Take Care Of Your Hand..
4.The Hardened Steel 0.4Mm Nozzle Is Removable, You Can Remove The Nozzle The Nozzle With Just A Wrench No Need To Grab The Heat Sink, It Is A Great Choice If You Often Change The Nozzle..
2. The Bambu Lab Hotend Is Compatible With X1 Series 3D Printers But Not P1 Series As The Ceramic Heaters As Thermistors For Them Are Different For Them..
Features
- 1. It is a bambu labs complete hotend without hotend cooling fan and retaining clip, the assembled hotend with hardened steel 0.4mm nozzle, the ceramic heater and thermistor a silicone cover and a thermal grease are included.
- 2. The bambu lab hotend is compatible with X1 Series 3D printers but not P1 Series as the ceramic heaters as thermistors for them are different for them.
- 3.The heat sink, throat, heat block and the removable hardened steel 0.4mm nozzle are assembled, you only need to assemble the ceramic heater and thermistor or keep them for later use. Please heat the nozzle to 250 and tighten it to avoid leaking.
- 4.The hardened steel 0.4mm nozzle is removable, you can remove the nozzle the nozzle with just a wrench no need to grab the heat sink, it is a great choice if you often change the nozzle.
- 5.Please heat up the bambu labs hotend to about 260 when changing the nozzle, it helps you to prevent it from leaking, please take care of your hand.
- See more on Amazon...
Brand: HICTOP | Manufacturer: HICTOP
See On Amazon #4
Imdinnogo Bambulab X1 Series 3D Printer Part 5V 12W LED Light Upgrade Kit: 3 Section 7.5cm/2.95in Length Strip Light - Spacing of Each Section 30cm/11.8in - Waterproof Bczamd
Asin: B0CJJ93TCC
3. White Light, Upgraded Led Light Source, Stabilized Constant Current. Create A Comfortable And Even Healthy Spatial Light Sense..
5. This Is A Waterproof Light Strip, The Length Of The Wire Is Enough, You Can Arrange The Light Strip Position According To Our Pictures Or According To Your Own Design..
4. Compared To The Original Light, This Provides A Very Good Light For Your Working Environment. With The Chamber Camera In The Bambulab, You Can Clearly See The Printing Process, And Remote Control Of The Light Is Also Possible On Bambuhandy..
2. Installation Is Very Simple, Follow The Guidelines In Our Pictures Or Videos..
Features
- 1. Upgraded LED chip, energy and power-saving. Good chip and luminous efficiency, low light wane, long service life. Uniform of luminance, soft light. Only for Bambu Lab X1 X1C X1-Carbon
- 2. Installation is very simple, follow the guidelines in our pictures or videos.
- 3. White light, Upgraded LED light source, stabilized constant current. Create a comfortable and even healthy spatial light sense.
- 4. Compared to the original light, this provides a very good light for your working environment. With the Chamber Camera in the Bambulab, you can clearly see the printing process, and remote control of the light is also possible on BambuHandy.
- 5. This is a waterproof light strip, the length of the wire is enough, you can arrange the light strip position according to our pictures or according to your own design.
- See more on Amazon...
Brand: Imdinnogo | Manufacturer: Aimengda
See On Amazon #5
Imdinnogo 3D Printer Accessories for Bambulab X1 P1P P1S Series Anti-Slip Cushioning Rubber Foot Mats: An Upgrade Kit for The Bambulab Prevents Slippage Reduces Vibration Improves Print Quality Bczamd
Asin: B0CLV6K74X
Package Includes: 4Pcs Anti-Slip Cushion Feet, Each Height: 26Mm/1.02In,Outer Diameter: 29Mm/1.14In, Inner Diameter: 12Mm/0.47In.
When You're Bothered That Your Printer Won't Level, You're Probably Looking For Problems With The Hotend, The Nozzles, The Platform, The Guides, And So On. But It Could Also Be That The Original Feet Have Failed, Replace Them With These Upgraded Feet, It Can Dramatically Improve The Quality Of Your Prints!.
The Shock Absorbing Foot Pad Aims To Separate The 3D Printer From Other 3D Printers On The Same By Absorbing Energy. When Multiple Of 3D Printers Are Placed On The Same Desktop, It Is Strongly Recommended To Replace Support Feet With These Shock Absorbing Foot Pads, As They Can Effectively Reduce Machine On Nearby Areas..
Suitable For Bambulab Series X1 X1c P1p P1s, Please Remove The Original Feet Before Replacing, No Need To Adjust Too Much, As Long As Your Table Is Balanced, Install And Use..
Features
- Before installing it into your printer, please watch the installation video we have uploaded. For white printouts of STL files, get the STL from Printables: 843995. This part will add stability to the feet, we will add this part to subsequent products after we sell out the stock in our Amazon warehouse. Please understand us, thank you very much.
- Suitable for Bambulab Series X1 X1C P1P P1S, please remove the original feet before replacing, no need to adjust too much, as long as your table is balanced, install and use.
- Package Includes: 4pcs Anti-slip cushion feet, each height: 26mm/1.02in,outer diameter: 29mm/1.14in, inner diameter: 12mm/0.47in
- The shock absorbing foot pad aims to separate the 3D printer from other 3D printers on the same by absorbing energy. When multiple of 3d printers are placed on the same desktop, it is strongly recommended to replace support feet with these shock absorbing foot pads, as they can effectively reduce machine on nearby areas.
- When you're bothered that your printer won't level, you're probably looking for problems with the Hotend, the Nozzles, the Platform, the Guides, and so on. But it could also be that the original feet have failed, replace them with these upgraded feet, it can dramatically improve the quality of your prints!
- See more on Amazon...
Brand: Imdinnogo | Manufacturer: Aimengda
Dimensions: 1.14 x 1.02 x 1.02 inches
See On Amazon #6
YOOPAI Double-Sided PEI+PEO Build Plate for Bambu Lab 3D Printer, 257x257mm 3D Printer Bed for Bambu Lab A1 X1 X1C/P1P/P1S 3D Printers
Asin: B0CNP6MP7J | Model: PEI+PEO-257-BK | PartNumber: PEI+PEO-257-BK | Ean: 0850055848252 | UPC: 850055848252
Simple Set-Up: The Build Plate Consists Of Just One Parts - A Flexible Steel Platform With Double Sided Pei+Peo Coating. Since The Hotbed Of The Bambu Lab Printers Is Built-In Magnet, Simply Affix The Pei+Peo Platform To The Hotbed For Instant Printing Without Any Complex Setup Procedures..
Compatible 3D Prenter Models: With A Size Of 257*257 Mm (10.12*10.12 Inch), This Build Plate Is Compatible With Bambu Lab A1, X1, X1c, P1p, P1s And X1-Carbon Combo. Please Confirm Your Printer Model Before Purchasing. After Installation, Please Ensure To Re-Level The Print Bed To Enhance The Printing Quality..
Effortless Removal: This 3D Printer Bed Can Endure The Repeated Heating Cycles That Occur During 3D Printing. Its Flexible Surface Allows For Easy Removal Of Prints Once The Heated Bed Cools Down To Room Temperature. If A Print Still Sticks, Just Detach The Upper Magnetic Surface, Flex The Flexible Surface, And Watch The Model Easily Detach And Land In Your Hands..
Reliable And Cost-Effective: This 3D Printer Bed Is Built To Withstand The Demanding Conditions Of Continuous Printing Operations. The Peo Surface Is Perfect For Printing Pla, Tpu, Petg Filaments, While The Pei Surface Accommodates Most Filaments Including Pla, Abs, Petg, Tpu, And Nylon. By Investing In This Dual-Sided Bed, You Not Only Gain Two Different Printing Effects But Also Double The Usage Time, Making It A Cost-Effective Choice..
Features
- Excellent Adhesion: Each YOOPAI PEI+PEO sheet is equipped with two sides - one diamond textured PEO coating and one smooth PEI coating. You can easily print directly on either side without the need for glue or additional tools to ensure your model sticks firmly to the sheet. Both sides offer strong adhesion to the filaments of corresponding materials, allowing you to choose the appropriate side based on your printing requirements.
- Reliable and Cost-effective: This 3D printer bed is built to withstand the demanding conditions of continuous printing operations. The PEO surface is perfect for printing PLA, TPU, PETG filaments, while the PEI surface accommodates most filaments including PLA, ABS, PETG, TPU, and Nylon. By investing in this dual-sided bed, you not only gain two different printing effects but also double the usage time, making it a cost-effective choice.
- Simple Set-up: The build plate consists of just one parts - a flexible steel platform with double sided PEI+PEO coating. Since the hotbed of the Bambu Lab printers is built-in magnet, simply affix the PEI+PEO platform to the hotbed for instant printing without any complex setup procedures.
- Effortless Removal: This 3D printer bed can endure the repeated heating cycles that occur during 3D printing. Its flexible surface allows for easy removal of prints once the heated bed cools down to room temperature. If a print still sticks, just detach the upper magnetic surface, flex the flexible surface, and watch the model easily detach and land in your hands.
- Compatible 3D Prenter Models: With a size of 257*257 mm (10.12*10.12 inch), this build plate is compatible with Bambu Lab A1, X1, X1C, P1P, P1S and X1-Carbon Combo. Please confirm your printer model before purchasing. After installation, please ensure to re-level the print bed to enhance the printing quality.
- See more on Amazon...
Brand: YOOPAI | Manufacturer: YOOPAI
Dimensions: 0.00 x 10.12 x 10.12 inches
See On Amazon #7
ENOMAKER Silicone Sock for Bambu Lab X1 Carbon X1C P1P 3D Printer Extruder Hotend Protective Cover Heater Block Heat Insulation
Asin: B0C3TWK1WY | Model: Bambu Lab silicone sock | PartNumber: Bambu Lab silicone sock | Ean: 0764481226044 | UPC: 764481226044
Non-Stick Silicone Material Made..
Extend The Life Of The Heater Block And Extruder By Keeping It Cleaner..
Keep The Hotend Temperature Extremely Stable..
Heater Block Silicone Cover Instead Of Heat Insulation Cotton.
Features
- Slicone sock for Bambu Lab X1 P1P X1C 3d printer!
- Heater Block Silicone Cover Instead of Heat Insulation Cotton
- Non-stick silicone material made.
- Keep the hotend temperature extremely stable.
- Extend the life of the heater block and extruder by keeping it cleaner.
- See more on Amazon...
Brand: ENOMAKER | Manufacturer: ENOMAKER
See On Amazon #8
Wefuit 3D Printer PEO PET Build Plate for Bambu Lab X1/X1C/X1E/P1P/P1S/A1 3D Printer,Diamond PEO+Carbon Fiber PET Surface 257x257mm Spring Steel Plate,Double Sided Flexible Sheet Removable Platform
Asin: B0CMPZ3C2L
【 Easy To Remove】The Spring Steel Sheet Can Be Bent To Remove The Model Quickly, Without The Help Of Other Tools. And The Plate Will Return To Flatness..
【Compatible 3D Printers】The Double-Sided Small Peo+Smooth Pet Print Bed Suitable For 3D Printers With 257X257mm Platform Size, Such As Suitable For Bambu Lab X1/X1c/X1e/P1p/P1s/A1. Please Confirm Your 3D Printer Platform Size Before Ordering..
【High Resistance And Compatible Filaments】The Big Peo Print Bed Surface Is Resistant To High Temperature 150℃ And Smooth Pet Coating Bed Is 150℃. After Our Extensive Testing, We Recommend Big Peo+Pet To Print Pla / Tpu /Petg，If You Want To Print Other Filaments, Please Adjust The Parameters..
【Excellent Adhesion For First Printing Layer】The Model Can Be Firmly Attached To The Surface Of The Print Bed.Easily Print Even For A Newbie. Please Let The Build Plate Cool Down Before Remove The Model To Avoid Damaging The Coating..
Features
- Upgraded build plate Double-sided Big PEO+PET spring steel plate,One side is upgraded big PEO film .big PEO looks like countless diamonds on the surface,which make your eyes light up.The other side is smooth PET.the bottom of the printed model is smooth One build plate has two beautiful patterns. The bottom of the prints will leave a unique pattern.
- Excellent adhesion for first printing layer The model can be firmly attached to the surface of the print bed.Easily print even for a newbie. Please let the build plate cool down before remove the model to avoid damaging the coating.
- Easy to Remove The spring steel sheet can be bent to remove the model quickly, without the help of other tools. And the plate will return to flatness.
- High Resistance and Compatible Filaments The big PEO print bed surface is resistant to high temperature 150 and smooth PET coating bed is 150 . After our extensive testing, we recommend big PEO+PET to print PLA / TPU /PETG If you want to print other filaments, please adjust the parameters.
- Compatible 3D Printers The double-sided small PEO+smooth PET print bed suitable for 3D printers with 257x257mm platform size, such as suitable for Bambu Lab X1/X1C/X1E/P1P/P1S/A1. Please confirm your 3D printer platform size before ordering.
- See more on Amazon...
Brand: Wefuit | Manufacturer: Wefuit
See On Amazon #9
Imdinnogo 3D Printer Accessories Bambulabs X1C P1P P1S X1 Carbon Silicone Sock(10Pcs): for Nozzle Cover Extruder Hotend Protective Prevents Filament Buildup
Asin: B0CT8SK452
3. Keep Heaters And Extruders And Nozzles Clean. Silicone Socks Have Good Flexibility, Can Be Placed Close To The Heating Block, Easy To Install, Can Be Easily Assembled To The Hot End Without Disassembly, Stable And Not Easy To Fall Off, Very Strong.
5. Our Boxes Are Lightweight And Small, Making It Easy For You To Store Them. If You Encounter Any Problems, Please Feel Free To Contact Us!.
4. The Nozzle Silicone Cover Is Made Of Heat-Resistant, Non-Stick Silicone Material That Is Resistant To Temperatures Up To 260 Degrees Celsius. It Can Increase The Thermal Insulation Of The 3D Printer To Avoid Excessive Temperature Fluctuation; It Can Also Insulate The Heat To Avoid Burns Caused By Accidental Body Touch..
2. Non-Stick Silicone Material Made Which Can Avoid The Filament Buildup..
Features
- 1. Only for Bambulabs X1 X1C P1P P1S, Not for A1 A1-Mini Ender 3 Neptune3 Neptun4 Kobra2 Vyper.
- 2. Non-stick silicone material made which can avoid the filament buildup.
- 3. Keep heaters and extruders and nozzles clean. Silicone socks have good flexibility, can be placed close to the heating block, easy to install, can be easily assembled to the hot end without disassembly, stable and not easy to fall off, very strong
- 4. The Nozzle silicone cover is made of heat-resistant, non-stick silicone material that is resistant to temperatures up to 260 degrees Celsius. It can increase the thermal insulation of the 3d printer to avoid excessive temperature fluctuation; it can also insulate the heat to avoid burns caused by accidental body touch.
- 5. Our boxes are lightweight and small, making it easy for you to store them. If you encounter any problems, please feel free to contact us!
- See more on Amazon...
Brand: Imdinnogo | Manufacturer: Imdinnogo
See On Amazon #10
IdeaFormer-3D H1H Smooth Build Plate for Bambu Lab X1C/X1/X1E/P1P/P1S/A1 Print Bed Light Beam+Phantom Spring Steel Sheet Plate 257x257mm Double Sided Flexible Sheet for Bambu Labs Series 3D Printers
Asin: B0CPP6C8F8 | Model: PEO-PET-257 | PartNumber: PEO-PET-257
【Easy To Maintain】The Light Beam Or Phantom Pattern Of The Prints May Fade Or Disappear If Wiped With Hands Or Other Oily Objects, But Don't Worry, You Only Need To Wipe The H1h Surface With A Wet Tissue And Then Wipe Dry It With A Dry Tissue To Keep It Clean, It Will Become As Clean As The First Time You Got It, The Light Beam Or Phantom Pattern Can Be Reappeared!.
【Package Included】1 X Spring Steel Sheet (H1h Build Plate Light Beam+Phantom Double Sided Printing). Our Double-Sided H1h Build Plate Fits 3D Printers With A Platform Size Of 257X257mm, Compatible For Bambu Lab X1c/X1/X1e/P1p/P1s/A1..
【Compatible Filaments】The H1h Printing Plate Surface Is Resistant To High Temperatures Of 200°C.After Our Extensive Testing, We Recommend The H1h Build Plate To Print Pla /Petg /Tpu /Abs, If You Want To Print Other Filaments, Please Adjust The Parameters..
【Excellent Adhesion 】The H1h Spring Steel Flexible Sheet Has A Good Adhesive, Even Better Than Smooth Pei Pet Or Peo. It Even Can Stick Well Without Heating The Platform, No Glue Is Needed. If Your Printer Is X1 Series, Please Turn Off "Enable Detection Of Build Plate Position", Otherwise It Will Casued Bad Adhesion..
Features
- H1H Effect Build Plate The H1H spring steel sheet is double sided print plate. One side is a Light beam pattern, which can leave a vibrant Rainbow Streak on the bottom of your printed model. The other side is a phantom pattern, it allows you to transfer holographic patterns to your print object. Make your prints stand out.
- Excellent Adhesion The H1H spring steel flexible sheet has a good adhesive, even better than smooth PEI PET or PEO. It even can stick well without heating the platform, no glue is needed. If your printer is X1 series, please turn off Enable detection of build plate position, otherwise it will casued bad adhesion.
- Easy to Maintain The Light beam or phantom pattern of the prints may fade or disappear if wiped with hands or other oily objects, but don't worry, you only need to wipe the H1H surface with a wet tissue and then wipe dry it with a dry tissue to keep it clean, It will become as clean as the first time you got it, the Light beam or phantom pattern can be reappeared!
- Compatible Filaments The H1H printing plate surface is resistant to high temperatures of 200 C.After our extensive testing, we recommend the H1H build plate to print PLA /PETG /TPU /ABS, If you want to print other filaments, please adjust the parameters.
- Package Included 1 x Spring steel sheet (H1H Build Plate Light Beam+Phantom Double Sided Printing). Our double-sided H1H build plate fits 3D printers with a platform size of 257x257mm, compatible for Bambu Lab X1C/X1/X1E/P1P/P1S/A1.
- See more on Amazon...
Brand: IdeaFormer-3D | Manufacturer: Bell Tech
See On Amazon #11
Imdinnogo 3D Printer Accessories Upgrade Extruder Gear Kit for Bambulab X1 Series P1P P1S Active Extrusion Wheel Assembly: 1Pcs Nano-Coated Gears Improved Filament Extrusion BCZAMD
Asin: B0CP41XB8F
3. Upgraded Slant Bearing 2: The Integrated Shaft Design Ensures Better Concentricity Of The Gears, Reduces Eccentric Rotation Of The Gears Due To Assembly, And Ensures That The Gears Transport Different Filament Pla Abs Tpu Petg Asa More Evenly..
5. Upgraded Slant Bearing 4: The Middle Of The Bearing With Groove, Which Is Beneficial To Tighten The Filament, Especially Soft Filament Like Tpu, Never Skid. The Other Bearing Hold The Stepper Motor, Smooth..
4. Upgraded Slant Bearing 3: Use High-Strength Mold Steel As The Material Of The Feeding Gear, And Use Nano-Coating For Surface Treatment. The Overall Rockwell Hardness Hrc Value Of The Gear Reaches 62-65; The Surface Hardness Hv Value Reaches 1000-1200, Which Greatly Ensures The Gear Strength, Wear Resistance And Corrosion Resistance, Improve The Bearing Capacity Of The Gear And Extend The Service Life Of The Gear..
2. Upgraded Slant Bearing 1: Cnc Processing Technology, Skeletonized Pom And Nano-Coated Mold Steel. Compare With Hardend Steel Material, It Is More Durable And Stable..
Features
- 1. Must Spare Printing Hot End parts: Hobb Level assembly wheel, directly repair for your original Bambulab P1P X1 P1S print head, or DIY your own FDM machine.
- 2. Upgraded Slant Bearing 1: CNC Processing technology, Skeletonized POM and nano-coated mold steel. Compare with hardend steel material, it is more durable and stable.
- 3. Upgraded Slant Bearing 2: The integrated shaft design ensures better concentricity of the gears, reduces eccentric rotation of the gears due to assembly, and ensures that the gears transport different filament PLA ABS TPU PETG ASA more evenly.
- 4. Upgraded Slant Bearing 3: Use high-strength mold steel as the material of the feeding gear, and use nano-coating for surface treatment. The overall Rockwell hardness HRC value of the gear reaches 62-65; the surface hardness HV value reaches 1000-1200, which greatly ensures the gear Strength, wear resistance and corrosion resistance, improve the bearing capacity of the gear and extend the service life of the gear.
- 5. Upgraded Slant Bearing 4: The middle of the bearing with groove, which is beneficial to tighten the filament, especially soft filament like TPU, NEVER Skid. The other bearing hold the stepper motor, smooth.
- See more on Amazon...
Brand: Imdinnogo | Manufacturer: Aimengda
See On Amazon #12
LANKEGU PEI + PEO Double Side Build Plate for Bambu Lab X1, 3D Printer Textured PEI + Smooth PEO Spring Steel Plate and Magnetic Base Print Bed for Bambu Lab X1 257x257mm
Asin: B0CBH7YB1Q
Strong Magnetic Force Not Easy To Dislocate: Strong Magnetic Stickers Help It Maintain High Adhesion At High Temperatures Which Ensures Better Print Stability, The Stainless Steel Plate Will Not Shift During Printing, Causing Printing Failure..
Compatible Models: The Size Of This Pei + Peo Double Side Build Plate Is 257X257mm, Which Is Compatible With Bambu Lab X1, X1c, P1p, P1s..
Wide Compatibility: Applicable To Most Materials Such As Pla , Abs, Asa, Petg,Tpu, Pc, Pa, Etc. Peo Side Is Recommended For Printing Pla, Tpu And Petg Filament. Pei Side Is Recommended For Printing Pla , Petg, Pc, Abs, Tpu , Nylon Etc Filament..
Easy Model Removal: The Selected Spring Steel Is Made With High Flatnessand Good Elasticity, Ensuring Easy Model Removal.Lt Won't Be Deformed After Being Bent Repeatedly..
Features
- PEI+PEO Double Side Build Plate: PEO diamond printing surface, the smooth surface makes it easy to paste the model on the PEO platform, the first layer of the printed model is smooth.. Premium PEl powder coating, with heat and wear-resistant, frosted PEl powder coating, the plate surface is not easy to get scratched or damaged, the first layer of the printed model is is textured.
- Easy Model Removal: The selected spring steel is made with high flatnessand good elasticity, ensuring easy model removal.lt won't be deformed after being bent repeatedly.
- Strong Magnetic Force Not Easy to Dislocate: Strong magnetic stickers help it maintain high adhesion at high temperatures which ensures better print stability, the stainless steel plate will not shift during printing, causing printing failure.
- Wide Compatibility: Applicable to most materials such as PLA , ABS, ASA, PETG,TPU, PC, PA, etc. PEO side is recommended for printing PLA, TPU and PETG filament. PEI side is recommended for printing PLA , PETG, PC, ABS, TPU , Nylon etc filament.
- Compatible Models: The size of this PEI + PEO Double Side build plate is 257x257mm, which is compatible with Bambu Lab X1, X1C, P1P, P1S.
- See more on Amazon...
Brand: LANKEGU | Manufacturer: LANKEGU
See On Amazon #13
RETUXEP 3D Printer PET+PEI Build Plate 257x257mm for Bambu Lab x1 P1P 3D Printer, Smooth Carbon Fiber PET+Textured PEI Spring Steel Build Plate,Double Sided Flexible Sheet Removable Platform
Asin: B0C6P7DBWB
【Good Adhesion】The Model Can Be Firmly Attached To The Surface Of The Print Bed. Please Let The Build Plate Cool Down Before Remove The Model To Avoid Damaging The Coating..
【Compatible 3D Printers】The Double-Sided Smooth Pet+ Textured Pei Print Bed Suitable For 3D Printers With 257X257mm Platform Size, Such As Suitable For Bambu Lab X1 X1c P1p X1-Carbon Combo. Please Confirm Your 3D Printer Platform Size Before Ordering..
【Compatible Filaments】Pet Build Plate Surface Only Prints Pla Filament.You'll Need Glue If You Print Other Materials. Pei Surface Plates Print Most Filaments Like Pla/Abs/Petg/Tpu/Nylon..
【Flexible And Easy To Remove】The Smooth Pet+Textured Pei Spring Steel Sheet Is Flexible. Prints Can Be Easily Removed By Hand Once The Build Surface Has Cooled, Or You Can Bend The Build Plate After The Pei Plate Cooled And Remove The Prints. The Print Mat Won’T Be Out Of Shape..
Features
- Upgraded Double Sided Printing Double-sided PET+PEI spring steel plate , one side is smooth carbon fiber pattern print surface--PET film. The other side is PEI frosted surface, presenting the frosted sticker surface a distinctive frosted touch, provides greater adherence to the model and prints without warping.
- Flexible and Easy to Remove The smooth PET+textured PEI spring steel sheet is flexible. Prints can be easily removed by hand once the build surface has cooled, or you can bend the build plate after the PEI plate cooled and remove the prints. The print mat won t be out of shape.
- Good Adhesion The model can be firmly attached to the surface of the print bed. Please let the build plate cool down before remove the model to avoid damaging the coating.
- Compatible Filaments PET build plate surface only prints PLA filament.You'll need glue if you print other materials. PEI surface plates print most filaments like PLA/ABS/PETG/TPU/Nylon.
- Compatible 3D Printers The double-sided smooth PET+ textured PEI print bed suitable for 3D printers with 257x257mm platform size, such as suitable for Bambu Lab X1 X1C p1p X1-Carbon Combo. Please confirm your 3D printer platform size before ordering.
- See more on Amazon...
Brand: RETUXEP | Manufacturer: AIYANQI
See On Amazon #14
FEAMCE 3D Printer Textured Build Plate for Bambu Lab X1/P1,Diamond Shape & Carbon Fiber Texture, Spring Steel Sheet Plate -Diamond & Carbon Fiber-X1/P1 (257 257mm)
Asin: B0CTTQGHPL | Model: FK2CC32222CL22C | PartNumber: FK2CC32222CL22C | Ean: 9367817515112
[Optimal First Layer Adhesion] Enhance Printing With Feamce's Peo+Pet Build Plate, Providing Excellent Adhesion For First Layers At Recommended Temperatures (Pla: 55~65℃; Petg: 75-85℃)..
[Comprehensive Package] Included: 1 X Spring Steel Plate With Double Sided Printing (Diamond Peo+Carbon Fiber Pet), Compatible With Bambu Lab X1c/X1/X1e/P1p/P1s. Elevate Your 3D Printing With Feamce's Technology And Premium Materials..
[Plate Maintenance] Maintain Superior Adhesion By Cleaning The Build Plate Thoroughly With Isopropyl And A Lint-Free Towel Between Prints. Any Residual Material Can Compromise Adhesion..
[High-Strength Spring Steel] Feamce's Robust Spring Steel Plates Offer Exceptional Flatness And Elasticity, Resisting Deformation After Repeated Bending..
Features
- [Advanced Double Sided Printing] Experience superior 3D printing versatility with FEAMCE's Double Sided Printing plates, seamlessly integrating diamond-patterned PEO and carbon fiber PET on a reliable spring steel plate.
- [High-Strength Spring Steel] FEAMCE's robust spring steel plates offer exceptional flatness and elasticity, resisting deformation after repeated bending.
- [Optimal First Layer Adhesion] Enhance printing with FEAMCE's PEO+PET build plate, providing excellent adhesion for first layers at recommended temperatures (PLA: 55~65 ; PETG: 75-85 ).
- [Plate Maintenance] Maintain superior adhesion by cleaning the build plate thoroughly with isopropyl and a lint-free towel between prints. Any residual material can compromise adhesion.
- [Comprehensive Package] Included: 1 x Spring Steel Plate with Double Sided Printing (Diamond PEO+Carbon Fiber PET), compatible with Bambu Lab X1C/X1/X1E/P1P/P1S. Elevate your 3D printing with FEAMCE's technology and premium materials.
- See more on Amazon...
Brand: FEAMCE | Manufacturer: FEAMCE
Dimensions: 0.59 x 13.78 x 11.81 inches | Weight: 0.32 pounds
See On Amazon #15
Imdinnogo 3D Printer Accessories Upgrade Kit - Bambulab X1 Series X1C P1P P1S Cooling Fan Duct: A Replacement Kit for The Original Bambulab Duct to Provide More Heat Dissipation Improve Cooling Effect
Asin: B0CJJ31SKY
3. Very Easy To Install, Install And Play..
5. Note: In Order To Avoid The Ma Gnet Inconsistency Of Individual Machines, The Ma Gnet Is Not Directly Installed, The Ma Gnet Needs To Be Confirmed, And The Ma Gnet On The Extrusion Head Shell Attract Each Other Before Installation, To Avoid Ma Gnet Repulsion..
4. Pa12 Material, Good Temperature Resistance, Good Toughness..
2. Application : Bambulab P1p P1s Series, Bambulab X1 Series, Bambulab X1c, Etc..
Features
- 1. Upgrade and replace the original air ducts of Bambulab, from the original two air ducts blowing on two sides to three sides around the three air ducts, the air ducts are more accurate heat dissipation, multi-faceted cooling, enhance the cooling effect.
- 2. Application : Bambulab P1P P1S series, Bambulab X1 series, Bambulab X1C, etc.
- 3. Very easy to install, install and play.
- 4. PA12 Material, Good temperature resistance, Good toughness.
- 5. Note: In order to avoid the ma gnet inconsistency of individual machines, the ma gnet is not directly installed, the ma gnet needs to be confirmed, and the ma gnet on the extrusion head shell attract each other before installation, to avoid ma gnet repulsion.
- See more on Amazon...
Brand: Imdinnogo | Manufacturer: Aimengda
See On Amazon #16
brotect Glass Screen Protector Film compatible with Bambu Lab X1-Carbon 3D Printer - Glass-Foil 9H Protection [Scratch Resistant, High Clarity]
Asin: B0C4SDF11W | Ean: 4066208759917
[Highest Clarity] Its Ultra High Transparency Ensures A Clear And Sharp Hd View Of All The Screen Content, Compatible With Bambu Lab X1-Carbon 3D Printer.
[Easy Installation] Bubble-Free Installation Due To Its Optimized Adhesive Layer - Made In Germany.
[Anti-Fingerprint] This Hybrid-Glass Screen Protetor Has An Additional Anti-Fingerprint Layer That Minimizes Dirt And Fingerprint Smudges On Your Display.
[9H Extreme Hardness] This Case-Friendly Airglass Is 2X Thinner And Lighter Than Tempered Glass Screen Protectors But Offers The Same 9H Extreme Hardness Of Ordinary Hard Glass Protectors.
Features
- [Best Quality] BROTECT AirGlass Flexible Hybrid-Glass Screen Protector, the extra-hard and ultra-light sidekick that is compatible with Bambu Lab X1-Carbon 3D Printer
- [9H Extreme Hardness] This case-friendly AirGlass is 2x thinner and lighter than tempered glass screen protectors but offers the same 9H extreme hardness of ordinary hard glass protectors
- [Highest Clarity] Its ultra high transparency ensures a clear and sharp HD view of all the screen content, compatible with Bambu Lab X1-Carbon 3D Printer
- [Anti-Fingerprint] This Hybrid-Glass screen protetor has an additional anti-fingerprint layer that minimizes dirt and fingerprint smudges on your display
- [Easy Installation] Bubble-free installation due to its optimized adhesive layer - Made in Germany
- See more on Amazon...
Brand: brotect | Manufacturer: brotect
Dimensions: 0.50 x 6.69 x 4.13 inches
See On Amazon #17
HIKUDIY 0.4mm Hotend Kit for Bambu Lab A1 Mini, 3D Printer Parts Replacement Print Head for Bambu Lab A1 Mini 3D Printer
Asin: B0CSK9279S
Quick Replacement Design: The A1 Mini Hotend Heating Component With A Magnetic Block, Can Quickly And Accurately Fix The Hotend To The Installation Position, Making It Easy And Convenient To Remove And Install The Hotend (Note: Please Make Sure The Hotend Has Cooled Down Before Replacement, And Avoid Touching The Heating Block Under The Hot End To Prevent Burns).
Wide Compatibility: The A1 Mini Hotend Is Compatible With A Variety Of 3D Printing Materials, Including Pla, Abs, Petg, And More. This Broad Compatibility Ensures That Users Have A Diverse Range Of Options To Meet Their Specific Printing Requirements.
Super Durable Material: This Nozzle Is Made Of Hardened Steel Skd11 Material, The Smooth Inner Wall Which Reduces Clogging And Improves Printing Quality. The Max Temp Could Reach 500C, And The Hardness Is Over Hrc60 Can Reduce The Abrasion To The Inner And Outer Of The Nozzle During Long-Time Printing, Achieving High-Quality Printing.
Precision Temperature Control Technology: Featuring State-Of-The-Art Temperature Control Technology, The A1 Mini Hotend Provides Precise Temperature Control, Ensuring Even Material Melting And Improving Overall Print Quality.
Features
- High-Performance Heating Element: This hotend kit is compatible with the Bambu Lab A1 Mini 3D printer, equipped with an advanced heating element that rapidly reaches the desired temperature, ensuring a stable and efficient printing process
- Precision Temperature Control Technology: Featuring state-of-the-art temperature control technology, the A1 Mini hotend provides precise temperature control, ensuring even material melting and improving overall print quality
- Quick Replacement Design: The A1 Mini hotend heating component with a magnetic block, can quickly and accurately fix the hotend to the installation position, making it easy and convenient to remove and install the hotend (Note: Please make sure the hotend has cooled down before replacement, and avoid touching the heating block under the hot end to prevent burns)
- Super Durable Material: This nozzle is made of hardened steel SKD11 material, the smooth inner wall which reduces clogging and improves printing quality. The max temp could reach 500c, and the hardness is over HRC60 can reduce the abrasion to the inner and outer of the nozzle during long-time printing, achieving high-quality printing
- Wide Compatibility: The A1 Mini hotend is compatible with a variety of 3D printing materials, including PLA, ABS, PETG, and more. This broad compatibility ensures that users have a diverse range of options to meet their specific printing requirements
- See more on Amazon...
Brand: HIKUDIY | Manufacturer: HIKUDIY
See On Amazon #18
V2.0!! Up to 500 C, 3D Upgraded Bambu Lab Hot-End Version Hardened Steel Nozzle Assembly Kit, Compatible with X1 and P1P
Asin: B0CD434B8X | Ean: 0732184155787 | UPC: 732184155787
3. All Metal Smooth Insulation, Composed Of Bimetallic Copper And Titanium Alloy Insulation Sections, Provides Better Heat Dissipation Effect. The Throat Is Closely Integrated With The Heating Block, And The Structure Of The Throat Has Been Upgraded. A Step Limit Has Been Added At The Fitting Point With The Heating Block, Reducing The Phenomenon Of Material Leakage And Detachment..
5. Packaging: 1 Set Of Hardened Steel Nozzles With A Diameter Of 0.4Mm, And 1 High Flow 3-Hole Nozzle As A Spare Part. The Picture Content Shows The Shipped Accessories. (Excluding Thermosensitive Ceramic Accessories).
4. The Roughness Of The Inner Wall Of The Throat And Nozzle Is Ra0.4, Reducing Blockage And Improving Printing Quality. The Connection Between The Heating Block And The Radiator Is Upgraded To Two Titanium Alloy Screws For Fixation, Avoiding The Bending And Breaking Of The Throat During High-Speed Printing. At The Same Time, Titanium Alloy Has Better Insulation Effect And Increases Stability..
2. The Anode Black Radiator And Bimetallic Insulated Titanium Alloy Throat Are Fixed And Locked With M3 Top Wire, Which Is Easy To Install, Stable To Connect, And Can Be Disassembled And Replaced, Reducing The Cost Of Use..
Features
- 1. This kit is upgraded to a completely new design version, which can directly replace the hot end of the original Bb Lab X1/X1 Carbon/P1P models, and can be used with other DIY designs. The heating block has been upgraded to chrome zirconium copper nickel electroplating treatment, with high temperature resistance of 500 degrees Celsius printing and fast thermal conductivity.
- 2. The anode black radiator and bimetallic insulated titanium alloy throat are fixed and locked with M3 top wire, which is easy to install, stable to connect, and can be disassembled and replaced, reducing the cost of use.
- 3. All metal smooth insulation, composed of bimetallic copper and titanium alloy insulation sections, provides better heat dissipation effect. The throat is closely integrated with the heating block, and the structure of the throat has been upgraded. A step limit has been added at the fitting point with the heating block, reducing the phenomenon of material leakage and detachment.
- 4. The roughness of the inner wall of the throat and nozzle is Ra0.4, reducing blockage and improving printing quality. The connection between the heating block and the radiator is upgraded to two titanium alloy screws for fixation, avoiding the bending and breaking of the throat during high-speed printing. At the same time, titanium alloy has better insulation effect and increases stability.
- 5. Packaging: 1 set of hardened steel nozzles with a diameter of 0.4MM, and 1 high flow 3-hole nozzle as a spare part. The picture content shows the shipped accessories. (excluding thermosensitive ceramic accessories)
- See more on Amazon...
Brand: ZANYAPTR | Manufacturer: ZANYATECH
See On Amazon #19
Wefuit 3D Printer Accessories Led Lighting Strip 1.5V Suitable for Bambu lab X1/X1C 3D Printer,1.5m Cold White LED Light Strip can be Freely Cut for Bambu lab X1 Series
Asin: B0CXWLF8DD
【Optimized Illumination】Selected Imported Led Lamp Beads, High Brightness And Color Rendering, Uniform Light Emission And Long Lifespan. The Cool White Led Light Strip Ensures Clear, Uniform Illumination For Your 3D Prints, Reducing Eye Strain..
【Easy To Observe】The Light Upgraded Kit For Bambu Lab X1/X1c Provides You With A Brighter Working Environment Where You Can Clearly See The Printing Process..
【Soft And Flexible To Bend At Will】The Length Of The Wire Is Enough，Selected High-Quality Material Is Flexible And Soft, And Can Be Flexibly Spread In Complex Environments, Which Is More Suitable For Modeling Light Strips..
【Easy Installation】 No Expertise Is Required. There Is A Double-Sided Tape On The Back Of The Light Strip. It Is Ready To Use Without Fixing. Effortlessly Install And Pair With Your Bambu Lab X1 / X1c 3D Printer.
Features
- Precise Customization Each lamp bead is designed for easy customization. With cutting marks every 1cm along the 1.5V strip, you can conveniently cut and adjust the strip to your desired length, allowing adaptability to various spaces
- Easy Installation No expertise is required. There is a double-sided tape on the back of the light strip. It is ready to use without fixing. Effortlessly install and pair with your Bambu Lab X1 / X1C 3D printer
- Optimized Illumination Selected imported LED lamp beads, high brightness and color rendering, uniform light emission and long lifespan. The cool white led light strip ensures clear, uniform illumination for your 3D prints, reducing eye strain.
- Soft and flexible to bend at will The length of the wire is enough Selected high-quality material is flexible and soft, and can be flexibly spread in complex environments, which is more suitable for modeling light strips.
- Easy to observe The light upgraded kit for Bambu lab X1/X1C provides you with a brighter working environment where you can clearly see the printing process.
- See more on Amazon...
Brand: Wefuit | Manufacturer: Wefuit
See On Amazon #20
Wefuit Bambu Lab A1 Mini 3D Printer H1H Build Plate, Double Sided Build Sheet Heated Bed Spring Steel Flexible Platform 184X184mm,Light Beam+Phantom,Smooth and Colorful Plate for 3D Printer
Asin: B0CM42JP1Y
【 Easy To Remove And Use】The Spring Steel Sheet Can Be Bent To Remove The Model Quickly, Without The Help Of Other Tools. And The Plate Will Return To Flatness. Made Of High Quality Spring Steel Plate. Flexible, Removable, High Strength And Heat Resistance, Dual-Side Design, Thicker And More Durable. Easy To Use, Put The Printing Plate Onto The Lab Printer Hot Bed, Then The Print Bed Levelling Will Automatically Go On While Machine Powered On. (The Smooth Surface Has A Factory Protective Film).
Easy To Maintain】The Light Beam Or Phantom Pattern Of The Printed Model May Fade Or Disappear If Wiped With Hands Or Other Oily Objects, But Don't Worry,You Only Need To Wipe The H1h Surface With A Wet Tissue And Then Wipe Dry It With A Dry Tissue To Keep It Clean. It Will Become As Clean As The First Time You Got It,The Starry Pattern Can Be Reappeared !.
【High Resistance And Compatible Filaments】The H1h Print Bed Surface Is Resistant To High Temperature 200°C .After Our Extensive Testing, We Recommend H1h To Print Pla / Tpu /Petg/Abs，If You Want To Print Other Filaments, Please Adjust The Parameters..
【Excellent Adhesion For First Printing Layer】The Model Can Be Firmly Attached To The Surface Of The Print Bed.Easily Print Even For A Newbie. The H1h Spring Steel Flexible Build Plate (184X184mm) Has A Good Adhesive,Even Better Than Smooth Pei Pet Or Peo. It Even Can Stick Well Without Heating The Platform, No Glue Needed.Please Let The Build Plate Cool Down Before Remove The Model To Avoid Damaging The Coating..
Features
- New upgraded HIH build plate One side is a Light beam pattern, which dances in the space like neon-like light strips, vividly displaying natural colors and light with its soft arcs.The other side is a phantom pattern, which seems to be a subtle fusion of reality and dream, creating a fascinating illusion and stunning look.The combination of phantom and beam brings new fun to your 3D printing.
- Excellent adhesion for first printing layer The model can be firmly attached to the surface of the print bed.Easily print even for a newbie. The H1H spring steel flexible build plate (184x184mm) has a good adhesive,even better than smooth PEI PET or PEO. It even can stick well without heating the platform, no glue needed.Please let the build plate cool down before remove the model to avoid damaging the coating.
- Easy to Remove and use The spring steel sheet can be bent to remove the model quickly, without the help of other tools. And the plate will return to flatness. Made of high quality spring steel plate. Flexible, removable, high strength and heat resistance, dual-side design, thicker and more durable. Easy to use, put the printing plate onto the lab printer hot bed, then the print bed levelling will automatically go on while machine powered on. (The smooth surface has a factory protective film)
- High Resistance and Compatible Filaments The H1H print bed surface is resistant to high temperature 200 C .After our extensive testing, we recommend H1H to print PLA / TPU /PETG/ABS If you want to print other filaments, please adjust the parameters.
- Easy to Maintain The Light beam or phantom pattern of the printed model may fade or disappear if wiped with hands or other oily objects, but don't worry,You only need to wipe the H1H surface with a wet tissue and then wipe dry it with a dry tissue to keep it clean. It will become as clean as the first time you got it,the starry pattern can be reappeared !
- See more on Amazon...
Brand: Wefuit | Manufacturer: Wefuit
Dimensions: 7.24 x 0.03 x 7.24 inches | Weight: 0.44 Pounds
See On Amazon
Looking For Something Else?
Search