Turning Tool,Carbide Inner Turning Tool WNMA080408 LF3018 Turning Tool CNC Carbide Lathe Cutting Tool
Asin: B0D1MQZFMP | Model: LPXDS | PartNumber: LPXDS | Ean: 8095460325864
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.3. Used For Turning And Finishing Of Various Materials;.
2. Turning Blade, Stainless Steel And Steel Design, Sharp And Wear-Resistant, Smooth Chip Removal;.
Features
- 1. Cemented carbide multi-layer coating, long service life, fast cutting speed, low friction coefficient, good wear resistance;
- 2. Turning blade, stainless steel and steel design, sharp and wear-resistant, smooth chip removal;
- 3. Used for turning and finishing of various materials;
- See more on Amazon...
Brand: LPXDS | Manufacturer: LPXDS
Weight: 0.11 pounds
See On Amazon Similar To Turning ToolCarbide Inner Turning Tool
#1
VINWOX 8 PCS Carbide Wood Lathe Turning Tool Set, Carbide Lathe Turning Tool, Including Swan Neck Hollower, Rougher, Finisher, Detailer, Pen Turning tools, Aluminum Alloy Handles from 14" to 29"
Asin: B0CG61QPF3 | Model: wood chisel-4pcs ALU Handle | PartNumber: wood chisel-4pcs ALU Handle | Ean: 0769293700683 | UPC: 769293700683
✅The Length Of The Shank Inserted Into The Handle Is Adjustable According To Your Need On Turning Reach..
✅Simply More Turning & Long Lasting, Say Good-Bye To Sharpening Tools. Top Quality And Long Cutting Life Guaranteed..
✅Detailer With 28X10mm Carbide Tip And 3/8”X3/8” (10X10mm) Tool Shank Make Final Touch On Small Beads Or Coves, Terrific On Chuck Tenons..
✅Including One Set Carbide Tip Insert Installed On Chisel..
✅Square Rougher With 11X11x2mm Carbide Tip And 3/8”X3/8” (10X10mm) Tool Shank Removes Bulk Fast And Efficiently, Terrific On Cutting Hard Materials..
✅Round Finisher With Ø12 Mm Carbide Tip And 3/8”X3/8” (10X10mm) Tool Shank Make Finishing Fast And Efficiently, Terrific Scraping Workout..
✅Swan Neck Hollower With Ø9x1.8Mm Carbide Tip And 3/4”X3/8” (19X10mm) Thick Polished Solid Swan Neck Toolbar Features With Sturdy Turning Feeling Whenever You Start Turning, Perfect Turning On All Inside Holes! Remember 29” Extra Long Handle Is Important On Hollowing Projects..
✅Two Pieces Aluminum Alloy Handles, The Normal Rod Connected To The Carbide Toolbar, The Extended Rod Can Be Screwed Onto The Normal Rod, Flexible Tool Length From 14“ To 29”.
✅All Tool Bars, From 3/4”X3/8” Swan Neck Toolbar To 3/8”X3/8” Regular Rougher/Finisher/Detailer Toolbars Are Fully Polished For Most Smooth Sliding On Tool Rest For Each Workpiece..
Features
- The VINWOX Carbide Turning Tools are Designed with Ease of Use in Mind. It is Ideal for Wood Turners of All Skill Levels and Helps Ensure Success Right From the Start. The VINWOX Carbide Turning Tools Eliminate the Need for Sharpening of Your Turning Tools Since It Features a Rotatable Cutter Head.
- All Tool Bars, from 3/4 x3/8 Swan Neck Toolbar to 3/8 x3/8 Regular Rougher/Finisher/Detailer Toolbars are Fully Polished for Most Smooth Sliding on Tool Rest for Each Workpiece.
- The Length of the Shank Inserted into the Handle is Adjustable According to Your Need on Turning Reach.
- SWAN NECK HOLLOWER with 9x1.8mm Carbide Tip and 3/4 x3/8 (19x10mm) Thick Polished Solid Swan Neck Toolbar Features with Sturdy Turning Feeling Whenever You Start Turning, Perfect Turning on All Inside Holes! Remember 29 Extra Long Handle is Important on Hollowing Projects.
- SQUARE ROUGHER with 11x11x2mm Carbide Tip and 3/8 x3/8 (10x10mm) Tool Shank Removes Bulk Fast and Efficiently, Terrific on Cutting Hard Materials.
- ROUND FINISHER with 12 MM Carbide Tip and 3/8 x3/8 (10x10mm) Tool Shank Make Finishing Fast and Efficiently, Terrific Scraping Workout.
- DETAILER with 28x10mm Carbide Tip and 3/8 x3/8 (10x10mm) Tool Shank Make Final Touch on Small Beads or Coves, Terrific on Chuck Tenons.
- Including One Set Carbide Tip Insert Installed on Chisel.
- Two Pieces Aluminum Alloy Handles, the Normal Rod Connected to the Carbide Toolbar, the Extended Rod Can Be Screwed onto the Normal Rod, Flexible Tool Length from 14 to 29
- Simply More Turning & Long Lasting, SAY Good-bye to Sharpening tools. Top quality and Long cutting life Guaranteed.
- See more on Amazon...
Brand: VINWOX | Manufacturer: VINWOX
See On Amazon #2
Diraeen 35Pcs Tungsten Carbide Cutters Inserts Set,Lathe Tools for Wood Lathe Turning Tools,Supplied with Screws and Screwdriver
Asin: B0C56QRJTB | Model: 35PCS | PartNumber: 35PCS
【3 Screwdrivers And 16 Screws】 The Tungsten Cutting Tool Blade Comes With Multiple Screwdrivers And Screws. Fully Equipped And Easy To Replace.
【High-Quality After-Sales Service】If You Are Not Satisfied With The Product At Any Time Within 1 Years After Purchase, We Will Provide A Refund Or Replacement. Package Included: 4*Square (11 X 11 Mm), 4*Diamond (30 X 10 Mm), 4* Round (Diameter 12 X 2.5 Mm) , 4*Round (Diameter 8.9 X 1.85 Mm), 16* Screws, 3*Screwdriver.
【Fits For Wood Lathe Turning Tools】This Combination Carbide Insert Kit Works Perfectly With Our Wood Lathe Turning Tools Kit.Meet The Requirements Of Rough Machining And Finishing Combination.
【Solid Tungsten Steel】All Of The Carbide Lathe Tools Replacement Inserts Are Made Of Quality Solid Tungsten Steel. Super Sharp And Durable, Long Lasting And Reliable, Hard To Break Or Deform, Providing You With Nice Use Experiences For A Long Time.
Features
- Carbide Lathe Tools Replacement Tips with Screws and Screwdriver Fits For Most Size 11 mm Square with Radius, 12 mm and 8.9 mm Round, 30 x 10 mm Diamond
- Solid Tungsten Steel All of the carbide lathe tools replacement inserts are made of quality solid tungsten steel. Super sharp and durable, long lasting and reliable, hard to break or deform, providing you with nice use experiences for a long time
- 3 screwdrivers and 16 screws The tungsten cutting tool blade comes with multiple screwdrivers and screws. Fully equipped and easy to replace
- Fits for wood lathe turning tools This combination carbide insert kit works perfectly with our wood lathe turning tools kit.Meet the requirements of rough machining and finishing combination
- High-quality after-sales service If you are not satisfied with the product at any time within 1 years after purchase, we will provide a refund or replacement. Package included: 4*Square (11 x 11 mm), 4*Diamond (30 x 10 mm), 4* Round (diameter 12 x 2.5 mm) , 4*Round (diameter 8.9 x 1.85 mm), 16* Screws, 3*Screwdriver
- See more on Amazon...
Brand: Diraeen | Manufacturer: DIRAEEN
See On Amazon #3
WenCrew Carbide Tipped Wood Turning Tools Set, 2023 Upgrade Carbide Lathe Tools for Woodturning, Lathe Rougher Finisher Swan Neck Hollowing Tools with Extendable Shafts
Asin: B0BG4QT947 | Model: carbide lathe tools-01 | PartNumber: carbide lathe tools-01
▶▶▶ Simple Operateion : Carbide Wood Turning Tools Allow Both Beginner And Experienced Turners To Quickly Start Projects By Reducing The Learning Curve Associated With Traditional Turning Tools. And Our Wood Lathe Tools Bring You Outstanding Results, Ideal For Lathe Woodworking Or Diy Enthusiasts.
▶▶▶ Delicate & Portable Case: Convenient Storage And Carry. You Will Get 1* 11Inch Length Aluminum Lathe Tools Handle+ 1* 10Inch Length Handle Extension + 4* Carbide Tips +2*Tools; (4 Tips Included Round + Diamond+ Square + Hollower, 2 Tools Included T15 Wrench And Allen Wrench).
▶▶▶ Note: This Is A Handle + An Extension Rod, Not 2 Handles, If You Need Additional Replacable Handles Or Tips, Please Check The Accessory Variant Link, All Of Them Can Be Sold Separately, If You Couldn't Find The Relevant Link, Please Email Directly To Our Customer Service Staff, We Will Send The Asin To You.
▶▶▶ Fast Handle Switching: Excellent Reliable Ergonomics Grip Makes You Feel Comfortable And Light. Adjustable And Extendable Handle Support Freely Adjust The Length According To Your Preference. Wood Turning Tools Equipped With Tools To Adjust And Extend The Length, Easy And Flexible To Assemble And Disassemble.
▶▶▶ High Stability: High Performance Stainless Steel Arbor And Aluminum Oxide Handles Increase Stability And Shock Resistance. Better Shock Resistant Wood Turning Tools Will Ensure The Handle Will Not Loosen When Vibrating, Which Will Make You Get A Good Cutting Effect In Safe Operation(Heavy Duty Wood Turning Tools For Lathe Are Less Likely To Roll And Move On The Tool Holder Than Wood Tools).
Features
- SAY GOODBYE TO SHARPENING ANNOYANCE: Upgrade premium carbide lathe tools are made with Rotatable tungsten carbide tip with sharp edge. Once the edge becomes dull, you can always rotate the bit to get a new, sharper edge. Sharper & Luster Cutter can offer better strength and durability to helps maintain edge persistence, to avoid constant sharpening.
- HIGH STABILITY: High performance stainless steel arbor and aluminum oxide handles increase stability and shock resistance. Better shock resistant wood turning tools will ensure the handle will not loosen when vibrating, which will make you get a good cutting effect in safe operation(Heavy duty wood turning tools for lathe are less likely to roll and move on the tool holder than wood tools)
- SIMPLE OPERATEION : Carbide wood turning tools allow both beginner and experienced turners to quickly start projects by reducing the learning curve associated with traditional turning tools. And our wood lathe tools bring you outstanding results, Ideal for lathe woodworking or DIY enthusiasts
- FAST HANDLE SWITCHING: Excellent reliable ergonomics grip makes you feel comfortable and light. Adjustable and Extendable handle support freely adjust the length according to your preference. Wood turning tools equipped with tools to adjust and extend the length, easy and flexible to assemble and disassemble
- DELICATE & PORTABLE CASE: Convenient storage and carry. You will get 1* 11inch Length Aluminum lathe tools handle+ 1* 10inch Length Handle Extension + 4* Carbide Tips +2*Tools; (4 Tips included round + diamond+ square + hollower, 2 Tools included T15 wrench and allen wrench)
- NOTE: This is a handle + an extension rod, not 2 handles, if you need additional replacable handles or tips, please check the accessory variant link, all of them can be sold separately, if you couldn't find the relevant link, please email directly to our customer service staff, we will send the asin to you
- See more on Amazon...
Brand: WenCrew | Manufacturer: WenCrew
Dimensions: 0.10 x 5.00 x 2.00 inches
See On Amazon #4
Carbide Tipped Wood Turning Tools Set, Latest Lathe Rougher Finisher Swan Neck Hollowing Tools and Interchangeable Aluminum Alloy Grip Handle with Diamond Round Square Carbide Inserts
Asin: B08MBRPX3Z | Model: mugongju001 | PartNumber: mugongju001 | Ean: 0799117405289 | UPC: 799117405289
Indexable Cutter Design – Indexable Carbide Cutter Inserts Can Be Rotated Or Replaced To Provide A Fresh Cutting Edge Whenever Needed, ( Click The "Aogbra Store" To Order Replace Carbide Cutter Inserts When You Need ).
Tool Details – Tool Shafts Are Cnc Machined From Square High Carbon Steel, Making Them Strong And Solid In The Hand. The Square Shaft Profile Helps Keep The Tool Flat On The Tool Rest And Level With The Floor, Making Them Less Likely Than Round Shaft Tools To Roll And Shift While On The Tool Rest..
Easy To Use – The Variable Length Shaft Design And Carbide Cutters Are Valuable To All Skill Levels Of Woodworkers. Carbide Cutters Allow Both Beginner And Experienced Turners To Quickly Start Projects By Reducing The Learning Curve Associated With Traditional Turning Tools..
Material - Tools Are Made With Tungsten Carbide Tips For Extended Cutter Life, Stainless Steel Arbor For Strength And Durability, And Aluminum Oxide Alloy Handles For Grip, Comfort, And Durability..
Features
- OUR TURNING SYSTEM INCLUDES - (1) 11'' Tool Handle, (1) 9.8'' Handle Extension, (3) Carbide Cutter Tool Shafts (Circle, Square, Diamond), (1) Swan neck Carbide Cutter Hollowing Tool, (1) T15 Wrench, (1) Allen Wrench, (1) Aluminum Protective Case With Foam Insert.
- MATERIAL - Tools are made with tungsten carbide tips for extended cutter life, stainless steel arbor for strength and durability, and aluminum oxide alloy handles for grip, comfort, and durability.
- INDEXABLE CUTTER DESIGN Indexable carbide cutter inserts can be rotated or replaced to provide a fresh cutting edge whenever needed, ( Click the Aogbra Store to order replace carbide cutter inserts when you need )
- EASY TO USE The variable length shaft design and carbide cutters are valuable to all skill levels of woodworkers. Carbide cutters allow both beginner and experienced turners to quickly start projects by reducing the learning curve associated with traditional turning tools.
- TOOL DETAILS Tool shafts are CNC machined from square high carbon steel, making them strong and solid in the hand. The square shaft profile helps keep the tool flat on the tool rest and level with the floor, making them less likely than round shaft tools to roll and shift while on the tool rest.
- See more on Amazon...
Brand: Aogbra | Manufacturer: Aogbra
See On Amazon #5
Indexable Lathe Turning Tool,1/2'' Shank 7 Pieces Carbide Turning Tool Set,Metal Lathe Tools Holder for Turning Grooving Threading with Tin Coated Carbide Inserts Turning insert
Asin: B09CHDVNZ3 | Model: KinRite | PartNumber: KinRite | Ean: 0706926112284 | UPC: 706926112284
3.The Inserts: Carbide Material With Cvd Coating ,Used For Machining Stainless Steel And Steel,Used For Turning And Finishing On A Wide Range Of Materials，The Blade Is Sturdy, Low Friction Coefficient, Wear-Proof And Stable，Good Wear Resistance, Sharp And Durable ,Smoothing Cutting.
5.Black Oxide Smooth Finish On Each Turning Tool Holder Marked With Tool Holder Style And Shank Size. Typically Used For Threading, Turning, Cutoff, Parting, Part-Off, Finish Turning, Facing, External Grooving, Etc..
4. 7Pcs Different Angles Can Cut Out Any Model You Want With High Precision，S12m-Sclcr06 Is 5.9 Inches/ 150 Mm; Cutting Angle Is 95 Degree, Cutting Direction Is Right Hand，S12m-Sclcl06 Is Left Hand , The Dimensions As The Same As The Right Hand, Other 5Pcs Holders Is 3.9Inches/100Mm, And The Shank Diameter Is 1/2",.
2.The Holders Made Of Quality Cemented Carbide And Tungsten Steel（40Crmo）, Hrc Up And Down 48 Degrees ， High Hardness,Offer Long Life And Faster Cutting Speed.
Features
- 1.Package include: 7pcs Holders with inserts (Installed,as the pictures show),Each tool holder comes with a C6 TiN Coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action.Insert screw and wrench included;
- 2.The holders made of quality cemented carbide and tungsten steel 40CrMo , HRC up and down 48 degrees high hardness,Offer long life and faster cutting speed
- 3.The inserts: carbide material with CVD coating ,used for machining stainless steel and steel,Used for turning and finishing on a wide range of materials the blade is sturdy, low friction coefficient, wear-proof and stable Good wear resistance, sharp and durable ,smoothing cutting
- 4. 7pcs different angles can cut out any model you want with high precision S12M-SCLCR06 is 5.9 inches/ 150 mm; cutting angle is 95 degree, cutting direction is right hand S12M-SCLCL06 is left hand , the dimensions as the same as the right hand, other 5pcs holders is 3.9inches/100mm, and the shank diameter is 1/2,
- 5.Black oxide smooth finish on each turning tool holder marked with tool holder style and shank size. Typically used for threading, turning, cutoff, parting, part-off, finish turning, facing, external grooving, etc.
- See more on Amazon...
Brand: KinRite | Manufacturer: KinRite
See On Amazon #6
YUFUTOL Carbide Woodturning Tool Mini Size (3 Piece Set) Includes Diamond Shape, Round and Square Turning Tools With Comfort Grip Handles Perfect For Turning Pens or Small to Mid-Size Turning Project
Asin: B07TPS9YL2 | Model: ZY-GHM-0902-2-214 | PartNumber: ZY-GHM-0902-2-214 | Ean: 0797646127207 | UPC: 797646127207
Set Includes 2Pcs Round 12Mm Carbide Cutters, 2Pcs Square 11Mm Carbide Cutters And 2Pcs Diamond With Radius Cutters..
Designed To Be Kept Flat On The Tool Rest And Level To The Floor, The Yufutol Finisher/Rougher/Detailer Will Effortlessly Hog Away Massive Amounts Of Material For Any Woodturning Process Without The Need For Sharpening，For Wood Hobbyist Or Diy Or Carpenter.
Easy To Use:Greatly Simplified Learning Curving When Turning,No Complicated Angles To Learn And Remember,For All Skill Levels Woodworking Enthusiast Or Diy.
Dimension：Length Of Tool Bar 4.72"(120Mm) ，Length Of Wood Handle：7.87"（200Mm），Overall Length 12.6"(320Mm).
Features
- Combo Set Include: 3 Pieces Wood Turning Tools(Mini Finisher/Rougher/Detailer),Carbide Insert Cutters And Allen Key
- Dimension Length of Tool Bar 4.72(120mm) Length of wood handle 7.87 200mm Overall length 12.6(320mm)
- Set includes 2pcs Round 12mm carbide cutters, 2pcs Square 11mm carbide cutters and 2pcs Diamond with radius cutters.
- Easy to use:greatly simplified learning curving when turning,No complicated angles to learn and remember,For all skill levels woodworking enthusiast or DIY
- Designed to be kept flat on the tool rest and level to the floor, the YUFUTOL Finisher/Rougher/Detailer will effortlessly hog away massive amounts of material for any woodturning process without the need for sharpening for wood hobbyist or DIY or carpenter
- See more on Amazon...
Brand: YUFUTOL | Manufacturer: LA HARDWARE INC
Dimensions: 0.04 x 15.00 x 2.50 Inches | Weight: 0.01 pounds
See On Amazon #7
VINWOX 20" Full Size 4 PCS Carbide Wood Lathe Turning Tool Set, Carbide Wood Lathe Chisel Set, Carbide Lathe Turning Tool, Carbide Turning Tool
Asin: B08DKJYK7N | Model: wood chisel-4pcs | PartNumber: wood chisel-4pcs | Ean: 0728886900497 | UPC: 728886900497
Including One Set Replaceable Carbide Tip Insert Installed On Chisel. Rougher: 11.1X11.1X1.75Mm 4 Sided Square Shape Carbide Tip. Finisher: 12Mm Diameter Round Shape Carbide Tip. Detailer: 28X10mm Diamond Shape Carbide Tip. Peach Square Radius: 11.3X11.3X1.75Mm With 4 Sided 2" Arc Square Radius Carbide Tip. Blade Images On Product Picture Are Only For Clear Vision..
Top Quality And Long Cutting Life Guaranteed.
1/2/3/4 Indexed Carbide Tip Design Always Offer Sharpest Edge For Turning And Maximum Cutting Life.
10Mm Straight Square Steel Shank.
Features
- The VINWOX Carbide Turning Tools are designed with ease of use in mind. It is ideal for wood turners of all skill levels and helps ensure success right from the start. The VINWOX Carbide Lathe Tools eliminate the need for sharpening of your turning tools since it features a rotatable cutter head. Start your easy wood turning on your Wood Lathe with VINWOX Carbide Turning tools now
- 10mm Straight Square Steel Shank
- Including One set Replaceable Carbide Tip Insert installed on chisel. Rougher: 11.1x11.1x1.75mm 4 sided Square Shape Carbide Tip. Finisher: 12mm Diameter Round Shape Carbide Tip. Detailer: 28x10mm Diamond shape Carbide Tip. Peach Square Radius: 11.3x11.3x1.75mm with 4 sided 2 Arc Square Radius Carbide Tip. Blade images on product picture are only for Clear Vision.
- 1/2/3/4 Indexed Carbide tip design always offer sharpest edge for turning and maximum cutting life
- Top quality and Long cutting life Guaranteed
- See more on Amazon...
Brand: VINWOX | Manufacturer: VINWOX
See On Amazon #8
Lathe Grooving Tool Set - 3PCS 5/8" Grooving Holder Turning Holder with 10pcs Indexable Carbide Inserts MGMN200 for Metal Lathe Cutting Tools
Asin: B09YLCFXSL | Ean: 9331908315400
Specification - Shank Diameter Is 5/8''(16Mm), Overall Length 4''(100Mm), Mgivr2016-2 Overall Length 7''(180Mm), Right Hand Cutting Direction, Tin Coated Carbide Insert Is Durable.
After-Sales Service - 30 Days No Reason To Return Or Exchange.
Application - Screw-Up Structure Makes Assembly Smooth And Easy, Widely Used For A Processing Steel.
Features - New Process Upgrade Nitriding Treatment To Improve Tool Hardness And Lubricity. High Grip, Impact Resistance Strong, Speed Cutting Off And Processing.
Features
- Package Includes - 3pcs grooving bar(MGIVR2016-2/MGEHR1616-2/MGEHL1616-2) + 10PCS grooving inserts(MGMN200) + 3pc wrenches
- Features - New process upgrade nitriding treatment to improve tool hardness and lubricity. High grip, impact resistance strong, speed cutting off and processing
- Specification - Shank diameter is 5/8''(16mm), overall length 4''(100mm), MGIVR2016-2 overall length 7''(180mm), right hand cutting direction, TIN coated carbide insert is durable
- Application - Screw-up structure makes assembly smooth and easy, widely used for a processing steel
- After-Sales Service - 30 days no reason to return or exchange
- See more on Amazon...
Brand: IWONGO | Manufacturer: IWONGO
Weight: 1.76 Pounds
See On Amazon #9
33 Pieces Lathe Excircle Indexable Carbide Turning Tool Holder Bit Set MTJNR1616H16 + MWLNR1616H08 + MCLNR1616H12 with 30 CNMG 431 + WNMG 431 + TNMG 331 Metal Indexable Carbide Turning Insert Blades
Asin: B092R2GLPH | Model: Honoson-916243 | PartNumber: Honoson-916243
Size: Diameter Of The Handle Is (5/8 X 5/8 Inches/ 16 X 16 Mm); Overall Length Is 3-7/8 Inch/ 100 Mm, Cutting Direction Is Right Hand; Applicable Machine Tool Is Lathe; Each Tool Holder Has A Black Oxidized Smooth Surface, And The Tool Hardness (Hrc Up And Down 48 Degrees) And Accuracy Have Reached The First Grade.
Note: Due To The Slight Color Change Of Manual Measurement And Different Display Settings, Please Allow A Difference Of 1-3 Cm; Due To The Difference Between Different Monitors, The Picture May Not Reflect The Actual Color Of The Item.
Easy To Store: Insert 30 Pieces Of Cemented Carbide Into 3 Boxes, And Put Them In A Plastic Container, Safe And Easy To Store, Compatible With Mtjnl1616h16, Mwlnl1616h08, Mclnl1616h12 Or Mtjnr1616h16, Mwlnr1616h08, Mclnr1616h12.
Material: Lathe Indexable Carbide Turning Tool Holders Are Made Of Quality Cemented Carbide And Tungsten Steel; The Cemented Carbide Material Makes The Turning Tool Durable And Adaptable; Indexable Carbide Turning Insert Blades Are Made Of Cemented Carbide And Use Pvd Coating, The Blade Has High Hardness, Low Friction Coefficient, Nice Wear Resistance And Chemical Stability.
Features
- Package: you will receive 3 pieces 5/8 inch lathe indexable carbide turning tool holders, 1 piece MTJNR1616H16, 1 piece MWLNR1616H08, 1 piece MWLNR1616H08, 3 pieces carbide inserts and 10 pieces CNMG 431,10 pieces WNMG 431, 10 pieces TNMG 331 metal indexable carbide turning insert blades, cufficient quantity and easy to replace
- Material: lathe indexable carbide turning tool holders are made of quality cemented carbide and tungsten steel; The cemented carbide material makes the turning tool durable and adaptable; Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade has high hardness, low friction coefficient, nice wear resistance and chemical stability
- Size: diameter of the handle is (5/8 x 5/8 inches/ 16 x 16 mm); Overall length is 3-7/8 inch/ 100 mm, cutting direction is right hand; Applicable machine tool is lathe; Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and accuracy have reached the first grade
- Easy to store: insert 30 pieces of cemented carbide into 3 boxes, and put them in a plastic container, safe and easy to store, compatible with MTJNL1616H16, MWLNL1616H08, MCLNL1616H12 or MTJNR1616H16, MWLNR1616H08, MCLNR1616H12
- Note: due to the slight color change of manual measurement and different display settings, please allow a difference of 1-3 cm; Due to the difference between different monitors, the picture may not reflect the actual color of the item
- See more on Amazon...
Brand: Honoson | Manufacturer: Honoson
See On Amazon #10
ASZLBYM 5/8" 36PCS Indexable Carbide Lathe Turning Tool Insert Holder Bit Set MTJNR1616H16 + MWLNR1616H08 + MCLNR1616H12 with CNMG 431 + WNMG 431 + TNMG 331 Indexable Carbide Turning Insert Blades
Asin: B09F2PJ49F | Ean: 8414740898360
●Size : Diameter Of The Holder Is (5/8 X 5/8 Inches/ 16 X 16 Mm); Overall Length Is 3-7/8 Inch/ 100 Mm, Cutting Direction Is Right Hand; Applicable Machine Tool Is Lathe; Each Tool Holder Has A Black Oxidized Smooth Surface..
●Maybe You Need : If You Need 5/8" Left Hand Turning Holder Set, You Can Search For Asin : B07b8xnh98 To Buy It..
●Easy To Store : 33Pieces Indexable Carbide Turning Inserts Into 3 Plastic Boxes , Each Turning Tool Holder Is Placed In A Plastic Box, And Each Box Has A Clear Mark For Easy Identification Of The Product Model, Safe And Easy To Store..
●Material : Lathe Indexable Carbide Turning Tool Holders Are Made Of Quality 40Cr Steel; The 40Cr Steel Material Makes The Turning Tool Durable And Adaptable; Indexable Carbide Turning Insert Blades Are Made Of Cemented Carbide And Use Tin Coating, The Blade Has High Hardness, Low Friction Coefficient, Nice Wear Resistance And Chemical Stability..
Features
- PACKAGE : you will receive 3 pieces 5/8 inch lathe indexable carbide turning tool holders, 1 piece MTJNR1616H16, 1 piece MWLNR1616H08, 1 piece MWLNR1616H08, 11 pieces CNMG 431,11 pieces WNMG 431, 11 pieces TNMG 331 indexable carbide turning insert blades, cufficient quantity and easy to replace.
- MATERIAL : lathe indexable carbide turning tool holders are made of quality 40Cr steel; The 40Cr steel material makes the turning tool durable and adaptable; Indexable carbide turning insert blades are made of cemented carbide and use TIN coating, the blade has high hardness, low friction coefficient, nice wear resistance and chemical stability.
- SIZE : diameter of the holder is (5/8 x 5/8 inches/ 16 x 16 mm); Overall length is 3-7/8 inch/ 100 mm, cutting direction is right hand; applicable machine tool is lathe; each tool holder has a black oxidized smooth surface.
- EASY TO STORE : 33pieces indexable carbide turning inserts into 3 plastic boxes , each turning tool holder is placed in a plastic box, and Each box has a clear mark for easy identification of the product model, safe and easy to store.
- MAYBE YOU NEED : If you need 5/8 left hand turning holder set, you can search for ASIN : B07B8XNH98 to buy it.
- See more on Amazon...
Brand: ASZLBYM | Manufacturer: ASZLBYM
See On Amazon #11
ASZLBYM 11pcs RPMT10T3 MOE R5 Indexable Carbide Milling Inserts Blade Milling Cutter with 5/8"/16mm SRDPN1616H10 Indexable Carbide Milling Tool Holder Metal Lathe Cutting Tools
Asin: B09JBYZW1H | Model: 01 | PartNumber: 01 | Ean: 0747388941685 | UPC: 747388941685
Milling Tool Holder Cutter Size : Shank Diameter ( Length×Width ) : 5/8"*5/8"(16Mm*16Mm) ; Overall Length : 100 Mm ≈ 3.93" ..
Easy To Store: The Milling Tool Holder And Carbide Milling Inserts Are Packed In A Plastic Container, Safe And Easy To Store, Please Rest Assured To Buy!.
Rpmt10t3 Moe Carbide Milling Insert Size : Insert Style : Rpmt , Thickness: 0.156" ≈ 3.97Mm , Diameter : 0.393≈ 10Mm, P=11° Degree..
Material : The Srdpn1616h10 5/8" Lathe Milling Tool Holder Material Is 40Cr Steel, It Has The Characteristics Of Durability, Sturdiness And Stability, And Good Anti-Rust Performance. The Rpmt10t3 Moe Indexable Milling Inserts Cutter Material Is Carbide, And The Coating Is Cvd Al2o3 Ticn, It Has Good Toughness, Wear Resistance And High Temperature Resistance, The Milling Insert Can Be Used For Milling Cast Iron, Steel Parts And Stainless Steel..
Features
- PACKAGE INCLUDES : You will receive 1pc SRDPN1616H10 5/8 /16mm shank diameter carbide lathe milling tool holder , 11pcs RPMT10T3 MOE indexable carbide milling inserts cutters and 1pc T15 wrench.
- Material : The SRDPN1616H10 5/8 lathe milling tool holder material is 40Cr steel, it has the characteristics of durability, sturdiness and stability, and good anti-rust performance. The RPMT10T3 MOE indexable milling inserts cutter material is carbide, and the coating is CVD Al2O3 TICN, It has good toughness, wear resistance and high temperature resistance, the milling insert can be used for milling cast iron, steel parts and stainless steel.
- Milling tool holder cutter size : Shank Diameter ( length width ) : 5/8*5/8(16mm*16mm) ; Overall Length : 100 mm 3.93 .
- RPMT10T3 MOE carbide milling insert size : Insert Style : RPMT , thickness: 0.156 3.97mm , diameter : 0.393 10mm, P=11 degree.
- Easy to store: the milling tool holder and carbide milling inserts are packed in a plastic container, safe and easy to store, please rest assured to buy!
- See more on Amazon...
Brand: ASZLBYM | Manufacturer: ASZLBYM
See On Amazon #12
ASZLBYM Lathe Grooving Tool Holder Grooving Cut-Off Tool Holder MGEHR1212-1.5 With 11pcs MGMN150-G Indexable Carbide Grooving Inserts
Asin: B0BBLLKC23 | Model: 1 | PartNumber: 1 | Ean: 0747388757606 | UPC: 747388757606
Mgmn150-G Carbide Turning Insert Size : Thickness: 1.2Mm ≈ 0.047", Length : 16Mm ≈ 0.629" , Height : 3.5Mm ≈ 0.137" , P=7 Degree..
Easy To Store : The Grooving Tool Holder And Carbide Grooving Inserts Are Packed In A Plastic Container, Safe And Easy To Store, Please Rest Assured To Buy!.
Application : Suitable For Wide And Deep Groove Machining.The Grooving Cut-Off Tool Holder Insert Can Be Used For Cutting Stainless Steel, Iron Pipe, Copper Pipe, Aluminum Pipe, Non-Metallic Pipe, Plate And Other Materials..
Material : The Mgehr1212-1.5 Lathe Turning Tool Holder Material Is 40Cr Steel, It Has The Characteristics Of Durability, Sturdiness And Stability, And Good Anti-Rust Performance. The Mgmn150-G Grooving Inserts Cutter Material Is Carbide, And The Coating Is Hard Coated Alloys , It Has Good Toughness, Wear Resistance And High Temperature Resistance..
Features
- Package : You will receive 1pc 12mm shank diameter MGEHR1212-1.5 carbide lathe turning tool holder , 11pcs MGMN150-G grooving carbide turning inserts.
- Material : The MGEHR1212-1.5 lathe turning tool holder material is 40Cr steel, it has the characteristics of durability, sturdiness and stability, and good anti-rust performance. The MGMN150-G grooving inserts cutter material is carbide, and the coating is Hard Coated Alloys , It has good toughness, wear resistance and high temperature resistance.
- MGMN150-G carbide turning insert size : thickness: 1.2mm 0.047, length : 16mm 0.629 , height : 3.5mm 0.137 , P=7 degree.
- Application : Suitable for wide and deep groove machining.The Grooving Cut-Off Tool Holder insert can be used for cutting stainless steel, iron pipe, copper pipe, aluminum pipe, non-metallic pipe, plate and other materials.
- Easy to store : the grooving tool holder and carbide grooving inserts are packed in a plastic container, safe and easy to store, please rest assured to buy!
- See more on Amazon...
Brand: ASZLBYM | Manufacturer: ZIMING
See On Amazon #13
Accusize Industrial Tools 7 Pieces/Set 1/2'' Indexable Carbide Turning Tool Set in Fitted Box, 2387-2004
Asin: B00SS1YGY4 | Model: 2387-2004 | PartNumber: 2387-2004 | Ean: 0641799804334, 0663566006628 | UPC: 641799804334, 663566006628
Black Oxide Smooth Finish On Each Turning Tool Holder Marked With Tool Holder Style And Shank Size. Typically Used For Threading, Turning, Cutoff, Parting, Part-Off, Finish Turning, Facing, External Grooving, Etc..
Complete Set With Accessories: Set Includes Hex Screws, Hexagon Keys, And A Fitted Aluminum Case, Ensuring Readiness And Organization For Various Lathe Turning Operations..
Robust Material And Coating: Features C6 Tin Coated Carbide Inserts, Known For Their Positive Rake Cutting Angle And Effectiveness In Cutting Very Hard Metals..
Durable Holder Construction: Each Holder Boasts A Black Oxide Smooth Finish, Enhancing Longevity And Performance, Marked Clearly With Holder Style And Shank Size..
*** Insert Kit Item#: 2387-2004Inserts (Sold Separately On Amazon)***.
Comprehensive Tool Variety: Includes 7 Indexable Turning Tool Holders With Specific Models And Original Inserts, Facilitating A Wide Range Of Turning Operations..
Each Tool Holder Comes With A C6 Tin Coated Carbide Insert With Positive Rake Cutting Angle And Built-In Chip Breaker Great For General Purpose Cutting Action.Insert Screw And Wrench Included;.
Versatile Compatibility: Compatible With Axa 250-101 Or 250-102 Quick Change Turning Tool Holders And Axa 251-111 Quick Change Tool Post Sets..
Model Of Each Holder & The Original Insert: Mgehr08-2J (Insert: Mgmn200-M); Ser0500j11 (Insert: 11Er A60); Swgcr08-2J (Insert: Wcmt22); Sclcr08-2J (Insert: Ccmt21.5); Sclcl08-2J (Insert: Ccmt21.5); Sdncn08-2J (Insert: Dcmt21.5); Sdjcr08-2J (Insert: Dcmt21.5).
Features
- 7 piece indexable carbide lathe turning tool set. Shank size: 1/2 inch x 1/2 inch. Overall Length: 4"
- Model of each holder & the original insert: MGEHR08-2J (insert: MGMN200-M); SER0500J11 (insert: 11ER A60); SWGCR08-2J (insert: WCMT22); SCLCR08-2J (insert: CCMT21.5); SCLCL08-2J (insert: CCMT21.5); SDNCN08-2J (insert: DCMT21.5); SDJCR08-2J (insert: DCMT21.5)
- Black oxide smooth finish on each turning tool holder marked with tool holder style and shank size. Typically used for threading, turning, cutoff, parting, part-off, finish turning, facing, external grooving, etc.
- Each tool holder comes with a C6 TiN Coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action.Insert screw and wrench included;
- *** Insert kit Item#: 2387-2004INSERTS (Sold Separately on Amazon)***
- Comprehensive Tool Variety: Includes 7 indexable turning tool holders with specific models and original inserts, facilitating a wide range of turning operations.
- Robust Material and Coating: Features C6 TiN coated carbide inserts, known for their positive rake cutting angle and effectiveness in cutting very hard metals.
- Durable Holder Construction: Each holder boasts a black oxide smooth finish, enhancing longevity and performance, marked clearly with holder style and shank size.
- Versatile Compatibility: Compatible with AXA 250-101 or 250-102 quick change turning tool holders and AXA 251-111 quick change tool post sets.
- Complete Set with Accessories: Set includes hex screws, hexagon keys, and a fitted aluminum case, ensuring readiness and organization for various lathe turning operations.
- See more on Amazon...
Brand: Accusize Industrial Tools | Manufacturer: Accusize Co., Ltd.
Dimensions: 9.06 x 1.57 x 5.51 Inches | Weight: 2.65 Pounds
See On Amazon #14
Wood Lathe Turning tools 19.68 Inches Finisher Carbide Tipped Lathe Chisel Tool Bar With Ci3 12mm Round Carbide Insert Cutter for Wood Hobbyist or DIY or Carpenter
Asin: B07S8XBW2H | Ean: 0718774617729 | UPC: 718774617729
Handle：Solid Wood Material，Ergonomics Design Makes It More Comfortable While Doing Turning Job.
Dimension:Overall Length: 19.68"(500Mm)，Bar Length:7.87"（200Mm），Handle Length:11.81"（300Mm），Handle Diameter：1.2-1.4"（30Mm-40Mm）.
Easy To Use: Greatly Simplified Learning Curving When Turning,No Complicated Angles To Learn And Remember,For All Skill Levels Woodworking Enthusiast Or Diy.
Indexable Replacement Carbide Insert Design: Matched With 12Mm Round Carbide Insert, Indexable Give You Fresh Edge For Maximum Cutter Life. If You Need Carbide Replacement Insert Of Round 12Mm（Ci3）, You Can Find It In Our Amazon Store.
Features
- Mid Size Tool Details: CNC machined from 0.487" square STAINLESS STEEL, making them stronger, stiffer and less likely to roll than round shaft tools, Features a square shaft so the flat back can be kept flat on the tool rest and level with the floor
- Indexable Replacement carbide insert design: matched with 12mm Round Carbide Insert, Indexable give you fresh edge for maximum cutter life. If you need Carbide Replacement Insert of Round 12mm Ci3 , you can find it in our Amazon Store
- Handle solid wood material Ergonomics design makes it more comfortable while doing turning job
- Easy to use: greatly simplified learning curving when turning,No complicated angles to learn and remember,For all skill levels woodworking enthusiast or DIY
- Dimension:Overall length: 19.68(500mm) Bar length:7.87 200mm Handle length:11.81 300mm Handle diameter 1.2-1.4 30mm-40mm
- See more on Amazon...
Brand: Asieg Tool | Manufacturer: Asieg Tool
See On Amazon #15
Roartisa Carbide Tipped Wood Lathe Turning Tools Set, Full Size Rougher Finisher Swan Neck Hollowing Tools and Interchangeable Aluminum Alloy Grip Handle with Diamond Round Square Carbide Inserts
Asin: B09YV1P3BM | Model: CD-6-425 | PartNumber: CD-6-425 | Ean: 0760701076840 | UPC: 760701076840
Easy To Assemble, Seam To Work Well: The Length Of The Toolbar Can Be Adjusted Freely. For Safety, Please Make Sure The Toolbar Is Fixed Tightly By Both Screws. So The Total Length Of The Tool Should Be Within 19"..
What You Get: Include (2) 11'' Tool Handle, (3) Carbide Cutter Tool Shafts (Circle, Square, Diamond), (1) Swan Neck Carbide Cutter Hollowing Tool, (1) T15 Wrench, (1) Allen Wrench, (1) Aluminum Alloy Case With Sponge Liner..
Indexable Cutter Design: With A 100% Increase In Operating Efficiency, Indexable Carbide Cutter Inserts Can Be Rotated Or Replaced To Provide A Fresh Cutting Edge Whenever Needed..
Material: Carbide Inserts Are Made With Tungsten Carbide Tips For Extended Cutter Life, Stainless Steel Arbor For Strength And Durability, And Aluminum Oxide Alloy Handles For Grip, Comfort, And Durability..
Features
- The Only Lathe Turning Tools You Need: Say goodbye to your old HSS chisel. Roartisa 20" Full Size woodturning Tools allow both beginner and experienced turners to quickly start projects by reducing the learning curve associated with traditional turning tools.
- Material: Carbide inserts are made with tungsten carbide tips for extended cutter life, stainless steel arbor for strength and durability, and aluminum oxide alloy handles for grip, comfort, and durability.
- Easy To Assemble, Seam To Work Well: The length of the toolbar can be adjusted freely. For safety, please make sure the toolbar is fixed tightly by both screws. So the total length of the tool should be within 19.
- Indexable Cutter Design: With a 100% increase in operating efficiency, indexable carbide cutter inserts can be rotated or replaced to provide a fresh cutting edge whenever needed.
- What You Get: Include (2) 11'' Tool Handle, (3) Carbide Cutter Tool Shafts (Circle, Square, Diamond), (1) Swan neck Carbide Cutter Hollowing Tool, (1) T15 Wrench, (1) Allen Wrench, (1) aluminum alloy case with sponge liner.
- See more on Amazon...
Brand: Roartisa | Manufacturer: Roartisa
See On Amazon #16
3PCS 5/8" CNC Lathe Excircle Indexable Carbide Turning Tool Holder Bit Set MTJNR1616H16 + MWLNR1616H08 + MCLNR1616H12 with 3pcs wnmg431, cnmg431, tnmg331 Indexable Carbide Inserts (Right Cutting)
Asin: B076WTPBVK | Model: YQ17-DE9-215 | PartNumber: YQ17-DE9-215 | Ean: 6957999650546
★The Material Of The Turning Tool Holder Is 40Cr Steel, Black Oxide Smooth Finish On Each Turning Tool Holder Marked With Tool Holder Style And Shank Size..
★If You Need More Matching Insert Or 5/8" Left Turning Holder Set, You Can Search For B07g386y3b , B07q1117mj (Inserts) Or B07b8xnh98 , B07ttl32hw (Holder).
★The Material Of The Insert Is Carbide,The Inserts Can Be Used For Finishing Or Semi-Finishing Steel, The Inserts Has High Hardness, Low Friction Coefficient, Good Wear Resistance And Chemical Stability..
★Shank Diameter （Length×Width）: (16*16Mm ≈ 5/8"X5/8" ) ; Overall Length：(100Mm ≈ 3-7/8" ) ,Cutting Direction：Right Hand..
Features
- Package Included 3pcs indexable carbide turning tool holder (MTJNR1616H16 + MWLNR1616H08 + MCLNR1616H12 ) ; 3pcs indexable carbide turning inserts (CNMG431 + WNMG431 + TNMG331) ; 3 sets wrenches.
- Shank Diameter length width : (16*16mm 5/8x5/8 ) ; Overall Length (100mm 3-7/8 ) ,Cutting Direction right hand.
- The material of the turning tool holder is 40Cr steel, black oxide smooth finish on each turning tool holder marked with tool holder style and shank size.
- The material of the insert is carbide,the inserts can be used for finishing or semi-finishing steel, the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability.
- If you need more matching insert or 5/8 left turning holder set, you can search for B07G386Y3B , B07Q1117MJ (inserts) or B07B8XNH98 , B07TTL32HW (holder)
- See more on Amazon...
Brand: CK-CNC | Manufacturer: XUZHOU BAIYI Metal Technology Co., Ltd.
Weight: 1.72 Pounds
See On Amazon #17
OSCARBIDE 5/8 Shank 9 Pieces/Set Indexable Carbide Lathe Turning Tool Holder and Boring Bar,CNC Heavy-Duty Nickel Plated indexable Insert Holders for Turning Grooving Threading Cut Off
Asin: B09C8DCZHG | Ean: 0766415074097 | UPC: 766415074097
Cutters Bits Are Made Of Carbide With Tin-Coated,With Positive Rake Cutting Angle And Built-In Chip Breaker For General Purpose Cutting Action.
All Metal Lathe Cutting Tools And Inserts Packed In A Premuim Aluminium Carrying Case,Easy To Carry.
Metal Lathe Tools Suitable For Varied Grooving,External/Internal Turning And Threading,For Semi-Finishing/Roughing Steel Metal.
Turning Holders Are Made Of High Quality Steel With Nickel Cotated, Which Are More Durable Moistureproof, Dust-Proof Than General Lathe Tool Holder.
Features
- 5/8 Metal lathe cutting tools includes 1pcs External Parting&Grooving Tool Holder QA10R-30 , 6pcs External Turning tool holder SCBCR,SSSCR,SCLCL,SCLCR,SWGCR,SDNCN ,1pcs SER External Threading Tool Holder,1 pcs S10R-SCLCR Boring Bar
- Turning Holders are made of high quality steel with Nickel Cotated, which are more durable moistureproof, dust-proof than general lathe tool holder
- Cutters bits are made of carbide with Tin-coated,with positive rake cutting angle and built-in chip breaker for general purpose cutting action
- Metal Lathe tools suitable for varied grooving,external/internal turning and threading,for semi-finishing/roughing steel metal
- All metal lathe cutting tools and inserts packed in a premuim aluminium carrying case,easy to carry
- See more on Amazon...
Brand: OSCARBIDE | Manufacturer: Oscarbide Tools
Weight: 1.10 Pounds
See On Amazon #18
1 pcs MCSNL1616H12 Lathe Turning Tool Holder + 10pcs CNMG120408-MA VP15TF Carbide Insert Turning Tips Tool
Asin: B07YQJ736W | Model: MCSNL1616H12+ CNMG120408 | PartNumber: MCSNL1616H12+ CNMG120408 | Ean: 8414806129605
Package Included:1 Pcs Mcsnl1616h12+ 10Pcs Cnmg120408-Ma Vp15tf.
Blades Exquisite Workmanship, High Strength, High Toughness, Stable And Durable.If You Need More Cnmg120408 Inserts ,Please Search For Asin 【B07yxwnvdr】.
Black Oxided Smooth Finish On Each Turning Tool Holder Style And Shank Size..
Shank D：16Mm. Shank L: 100Mm.
Features
- Model MCSNL 1616H12+ CNMG120408-MA VP15TF
- Shank D 16mm. Shank L: 100mm
- Package included:1 pcs MCSNL1616H12+ 10pcs CNMG120408-MA VP15TF
- Black oxided smooth finish on each turning tool holder style and shank size.
- Blades exquisite workmanship, high strength, high toughness, stable and durable.If you need more CNMG120408 inserts ,please search for ASIN B07YXWNVDR
- See more on Amazon...
Brand: yangzhoumi | Manufacturer: yangzhoumi
See On Amazon #19
RHFGYY 5/8" Metal Lathe Cutting Tool Turning Tool Holder SRAPR1616H10 + 10pcs RCMT10T3 (R5) Carbide Turning Inserts Round Replacement Inserts for Lathe Tools
Asin: B09TZ3GV3W | Model: RHFGYY | PartNumber: RHFGYY | Ean: 0755738598038 | UPC: 755738598038
Type:Right Hand ,Screw Compression Type;.
Package Includes: 1X5/8" Tool Holder + 10Pcs Round Carbide Inserts (Boxed).
The Metal Lathe Cutting Tools Can Process Steel, Stainless Steel, Copper And Aluminum And Other Materials.;.
Tool Holder Is Black Oxidized Smooth Surface And Tool Hardness (Hrc 50 Degrees Up And Down) And Precision Are Up To The First Grade;.
Features
- RCMT10T3MO (R5) Round milling inserts: made of solid carbide with mutilayer coated, high finish and high wear resistance;
- Tool Holder is Black Oxidized Smooth Surface and Tool Hardness (HRC 50 degrees up and down) and Precision Are Up To The First Grade;
- Type:Right hand ,Screw compression type;
- The metal lathe cutting tools can Process Steel, Stainless Steel, Copper and Aluminum and Other Materials.;
- Package includes: 1x5/8 tool holder + 10pcs Round Carbide Inserts (Boxed)
- See more on Amazon...
Brand: RHFGYY | Manufacturer: RHFGYY
See On Amazon #20
OSCARBIDE 1/2" Mini Lathe Indexable Carbide Turning Tool Holder 5 Pieces/Set,Metal Lathe Cutting Tools with Carbide Inserts TCMT16T304
Asin: B07SSRD631 | Ean: 0782500239585 | UPC: 782500239585
Positive Rake Cutting And Built-In Chip Breaker Groove,For Turning, Cutting, Facing, Boring, And Chamfering.
5Pcs In A Wooden Case For Safe Storage,Carbide Inserts Tcmt16t304 For This Set, Please Search The Asin B0819cy784 On Amazon..
Carbide Insert Is Coated With Tin To Provide Long Life And Sharpness,Higher Temperatures Than Ordinary Steel Tools .Turning Tool Holder Is Made Of High-Quality Steel, Coated With Nickel For Durability,Moisture Proof And Resistant To Rusting And Corrosion..
Multiple Cutting Surfaces Available Provide Longer Tool Life,Carbide Inserts Can Be Rotated To A New Cutting Edge Without Changing The Position Of The Tool Holder.
Features
- Mini Turning Tool holders with 1/2'' Shank, 5ps/set AL, AR, BL, BR, and E Tool Holders with 5 TCMT C-6 Inserts
- Multiple cutting surfaces available provide longer tool life,Carbide Inserts can be rotated to a new cutting edge without changing the position of the tool holder
- Positive rake cutting and built-in chip breaker groove,for Turning, Cutting, Facing, Boring, and Chamfering
- Carbide insert is coated with tin to provide long life and sharpness,higher temperatures than ordinary steel tools .turning tool holder is made of high-quality steel, coated with nickel for durability,moisture proof and resistant to rusting and corrosion.
- 5pcs in a wooden case for safe storage,Carbide inserts TCMT16T304 for this set, please search the Asin B0819CY784 on Amazon.
- See more on Amazon...
Brand: OSCARBIDE | Manufacturer: OSCARBIDE TOOLS
See On Amazon
Looking For Something Else?
Search