AC Current Sensor Transmitter Transducer Split Core Input 0-800A AC Output 0-5V DC
Asin: B0D1R66PRQ | Ean: 6933076220086
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Power Supply:24V Dc +/-15%(If You Need Other Power Such As 12V,Contact Us).
Power Consumption:=/< 25Ma.
Working Temp.:-10To+70 Degrees Centigrade.
Response Time:<200 Ms.
Accurracy: 1% F.S.
Customerised Max Ranges:0-3000A Ac,E.G. Calibrate Input 0-500A Ac Output 0-10V.
Hole Diameter:80Mm.
Offset Voltage:< +/-50Mv.
Output:0-5V Dc.
Features
- Input:0-800A AC
- Output:0-5V DC
- Power Supply:24V DC +/-15%(If you need other power such as 12V,contact us)
- Hole Diameter:80mm
- Accurracy: 1% F.S
- Customerised Max Ranges:0-3000A ac,e.g. calibrate Input 0-500A ac Output 0-10V
- Working Temp.:-10to+70 degrees centigrade
- Response Time:<200 mS
- Offset Voltage:< +/-50mV
- Power Consumption:=/< 25mA
- Temperature Shifting:=/<500ppm/degree centigrade
- Isolation:2.5kV/50Hz,1Min
- Linearity:0.5
- See more on Amazon...
Brand: Loulesy | Manufacturer: Loulesy
Dimensions: 5.91 x 7.09 x 0.39 inches | Weight: 0.55 Pounds
See On Amazon Similar To AC Current Sensor Transmitter Transducer
#1
CrocSee Miniature Current Switch, CS-TS0, Normally Open Amp Sensor Monitoring Relay, AC 1-50A Detectable
Asin: B086YT49H7 | Model: 4A420 | PartNumber: 4A420 | Ean: 0689749968811 | UPC: 689749968811
Accurate & Dependable: Offers A Sensing Range Of 1 To 50 Amps And Universal, Solid-State Outputs; Accuracy: 1%.
Note: If You Want To Test The Operation Of The Sensor Switch, A Load Must Be Applied Across The No Contacts; Otherwise, It Will Not Work..
Faster Response Time: Once Current Flow Is Detected, It Closes A Set Of Contacts Immidiately; Response Time: ≤200Ms.
Self-Powered, No External Power Supply Required.
Features
- N.O. Universal Outputs: 2.5A @ 120 VAC/240VAC; In 240V circuit, only one 120V hot line is connected.
- Self-powered, no external power supply required
- Accurate & Dependable: Offers a sensing range of 1 to 50 amps and universal, solid-state outputs; Accuracy: 1%
- Faster Response Time: Once current flow is detected, it closes a set of contacts immidiately; Response Time: 200ms
- NOTE: If you want to test the operation of the sensor switch, a load must be applied across the NO contacts; otherwise, it will not work.
- See more on Amazon...
Brand: CrocSee | Manufacturer: CrocSee
See On Amazon #2
Twidec/M12 Approach Sensor Inductive Proximity Switch PNP NO DC 6-36V, 4mm Detecting Distance LJ12A3-4-Z/BY
Asin: B07NYD3CPK | Model: JND-LJ12A3-4-Z/BY | PartNumber: JND-LJ12A3-4-Z/BY | Ean: 0654913663397 | UPC: 654913663397
Model: Lj12a3-4-Z/By;Theory : Inductive Sensor;Output Type: Pnp No;Diameter Of Column Sensor: 12Mm;Detecting Distance : 4Mm.
External Material : Plastic, Alloy;Package Content : 1 X Inductive Proximity Switch.
Total Size: 6.2 X 2Cm/2.4'' X 0.8'' (L*Max. Dia); Cable Length: 1.2M/47'';Net Weight :44G.
Supply Voltage : Dc 6-36V;Current Output : 300Ma;Detect Object : Iron.
Features
- Product Name Inductive Proximity Switch; Wire Type : DC 3 Wire Type (Black, Brown, Blue);Switch Appearance Type : Cylinder Type
- Supply Voltage : DC 6-36V;Current Output : 300mA;Detect Object : Iron
- Model: LJ12A3-4-Z/BY;Theory : Inductive Sensor;Output Type: PNP NO;Diameter of Column Sensor: 12mm;Detecting Distance : 4mm
- Total Size: 6.2 x 2cm/2.4'' x 0.8'' (L*Max. Dia); Cable Length: 1.2m/47'';Net Weight :44g
- External Material : Plastic, Alloy;Package Content : 1 x Inductive Proximity Switch
- See more on Amazon...
Brand: Twidec | Manufacturer: Twidec
See On Amazon #3
Current Sensing Relay AC Current Sensing Switch 0-30A Normally Open Current Sensor Monitoring Relay (M3050)
Asin: B0B7VT46KG | Ean: 3395597999484
High Performance: The Switch Has No Limit On The Number Of Times Of Opening And Closing, And The Response Speed Reaches The Millisecond Level. The Hysteresis Is Less Than 1% And Can Be Used Under Strong Magnetic Conditions. Through Structure Design, Isolation Withstand Voltage Up To 2000V..
Abs Material: High-Power Mos Tube Non-Contact Electronic Switch Is Used, And The Shell Is Made Of Self-Extinguishing Material Abs, Which Is Heat-Resistant, Acid-Alkali-Resistant, High Impact Strength And Stable In Performance..
Led Indication: The Action Current Is 0-30A Ac, Which Can Be Adjusted By The Potentiometer. The Led Indicator Light Can Easily And Intuitively Indicate The Working Status Of The Switch..
Upgrade: Compared With Traditional Transformers, Thermal Protectors And Other Devices, Using This Device Can Not Only Get More Accurate And Timely Control, But Also Greatly Simplify The Design And Reduce Costs. Self-Powered, No External Power Supply Required. Input Through Current: 0-30A Ac Rated Load: 0.3A@240V Ac/Dc..
Features
- Multi-Purpose: M-3050 AC current sensing switch is specially designed and manufactured to solve AC current monitoring. It uses the principle of mutual inductance to sense AC direct current, isolate the AC current, output normally open or normally closed switch signals, and directly control various automated industrial equipment, such as flash lamps, buzzers, relays, microcontrollers or other power load equipment.
- Upgrade: Compared with traditional transformers, thermal protectors and other devices, using this device can not only get more accurate and timely control, but also greatly simplify the design and reduce costs. Self-powered, no external power supply required. Input through current: 0-30A AC Rated load: 0.3A@240V AC/DC.
- High Performance: The switch has no limit on the number of times of opening and closing, and the response speed reaches the millisecond level. The hysteresis is less than 1% and can be used under strong magnetic conditions. Through structure design, isolation withstand voltage up to 2000V.
- LED Indication: The action current is 0-30A AC, which can be adjusted by the potentiometer. The LED indicator light can easily and intuitively indicate the working status of the switch.
- ABS material: High-power MOS tube non-contact electronic switch is used, and the shell is made of self-extinguishing material ABS, which is heat-resistant, acid-alkali-resistant, high impact strength and stable in performance.
- See more on Amazon...
Brand: nodehawk | Manufacturer: nodehawk
Dimensions: 3.00 x 3.00 x 1.00 Inches
See On Amazon #4
Twidec/10mm Hall Effect Proximity Sensor Inductive Switch NPN NO Normally Open) with Magnet DC5-30V NJK-5002C
Asin: B07P1GKQRM | Model: JND-NJK-5002C | PartNumber: JND-NJK-5002C | Ean: 0654913663625 | UPC: 654913663625
Thread Diameter: 12Mm ; Thread Length: 32Mm；Load Current :150Ma (No More Than).
Net Weight : 50G ;Package Content : 1 X Hall Effect Sensor.
Detect Objects ：Metal Material ；Product Material: Metal ;Parts: Copper Plastic Components;Pbt External Leads:1.2 M (Standard, Others According To Customer Requirements) ;Output Indication:Led (Red);.
Output : Npn Three Lines Output State Normally Open (No).
Features
- Model: NJK-5002C Supply voltage : 5-30VDC; Detection distance :10mm (effective detection distance 0-10mm) ;
- Output : NPN three lines Output state normally open (NO)
- Thread Diameter: 12MM ; thread length: 32MM Load current :150MA (no more than)
- Detect objects metal material Product Material: Metal ;parts: Copper plastic components;PBT External leads:1.2 m (standard, others according to customer requirements) ;Output indication:LED (red);
- Net Weight : 50g ;Package Content : 1 x Hall Effect Sensor
- See more on Amazon...
Brand: Twidec | Manufacturer: Twidec
See On Amazon #5
3PCS 30A Range Current Sensor ACS712 Module AC/DC for Arduino (30A)
Asin: B08R5BX9F5 | Model: 19003-3 | PartNumber: 19003-3 | Ean: 0701715459632 | UPC: 701715459632
When There Is No The Detection Current Through, The Output Voltage Is Vcc/2.
Package Includes:3 Pack 30A Current Sensor Acs712 Module..
Note: Acs712 Module Is Based On The Principle Of Hall Detection, Please Avoid The Influence Of Magnetic Field When Using It!.
Pin 5V Power Supply; On-Board Power Indicator; Measuring Range: ±30 Amps, Corresponding Analog Output:66Mv/A..
Features
- Current sensor chip: ACS712ELC-30A Note: there are 3 specifications of the product 5A/20A/30A, Pls choose them accroding to your needs.
- Pin 5V power supply; on-board power indicator; Measuring range: 30 amps, corresponding Analog output:66mV/A.
- When there is no the detection current through, the output voltage is VCC/2
- Note: ACS712 module is based on the principle of Hall detection, please avoid the influence of magnetic field when using it!
- Package includes:3 Pack 30A Current Sensor ACS712 Module.
- See more on Amazon...
Brand: Atnsinc | Manufacturer: Atnsinc
Weight: 0.02 pounds
See On Amazon #6
NOYITO ACS712 Current Sensor Module Detector ACS712ELC 5A 20A 30A Amps Amperage Range (Pack of 2) (5A)
Asin: B07D1VVVR6 | Model: ACS7125A | PartNumber: ACS7125A | Ean: 0667797750275 | UPC: 667797750275
The Module Can Measure Range 5 / 20 /30 Amps, Corresponding To The Analog Output 100Mv / A;.
Pcb Board Size: 31 (Mm) X13 (Mm)[One Package Contains Two Products With The Same Parameters.].
No Test Current , The Output Voltage Is Vcc / 2.
Pin 5V Power Supply, On-Board Power Indicator;.
Features
- Current sensor chips: ACS712ELC-5A / ACS712ELC-20A / ACS712ELC-30A [There are three specifications for the product 5A / 20A /30A. You can choose the specifications according to your needs.];
- Pin 5V power supply, on-board power indicator;
- The module can measure range 5 / 20 /30 amps, corresponding to the analog output 100mV / A;
- No test current , the output voltage is VCC / 2
- PCB board size: 31 (mm) x13 (mm)[One package contains two products with the same parameters.]
- See more on Amazon...
Brand: NOYITO | Manufacturer: NOYITO
Dimensions: 0.39 x 1.22 x 0.51 inches | Weight: 0.02 Pounds
Warranty: Manufacturer's One-year After-sale Warranty
See On Amazon #7
Current Sensing Switch, Normally Open Current Sensing Relay Adjustable AC 0.2A -30A (SZC23 No AL-CH Model)
Asin: B07N1P6TWL | Ean: 0719527953316 | UPC: 719527953316
Led Indicator Can Conveniently And Intuitively Indicate The Working Status Of The Switch..
The Switch Has No Limit On The Number Of Opening And Closing, And The Speed Reaches The Ms Level..
High-Power Mos Tube Contactless Electronic Switch..
Action Current 0.2-30A Ac, Adjustable With A Potentiometer..
Features
- Self-powered, no external power supply required.
- Action current 0.2-30A AC, adjustable with a potentiometer.
- LED indicator can conveniently and intuitively indicate the working status of the switch.
- High-power MOS tube contactless electronic switch.
- The switch has no limit on the number of opening and closing, and the speed reaches the ms level.
- See more on Amazon...
Brand: Hilitand | Manufacturer: Hilitand
Dimensions: 0.98 x 2.56 x 1.97 inches | Weight: 0.00 Pounds
See On Amazon #8
ECO-WORTHY Hall Sensor AC to DC Transmitter, Input 50A 100A 200A 300A Additional Accessories for Battery Monitor
Asin: B0CTKKDFBD | Ean: 0810127132566 | UPC: 810127132566
[Bidirectional Current Monitoring] Eco-Worthy Battery Monitor Supports Dual Hall Sensors To Collect Both Input And Output Current Separately, And Display Input And Output Power..
Features
- [ECO-WORTHY Hall Sensor] Input 50A 100A 200A 300A Additional Accessories for Battery Monitor.
- [Bidirectional Current Monitoring] ECO-WORTHY battery monitor supports dual Hall Sensors to collect both input and output current separately, and display input and output power.
- See more on Amazon...
Brand: ECO-WORTHY | Manufacturer: ECO-WORTHY
See On Amazon #9
HiLetgo ACS758 ACS758LCB-050B-PFF-T 50A Linear Current Sensor ACS758LCB Current Module 120 kHz Bandwidth 3-5.5V
Asin: B0832PHKB5
Output Voltage Proportional To Ac Or Dc Currents.
Nearly Zero Magnetic Hysteresis, Extremely Stable Output Offset Voltage.
Features
- ACS758 ACS758LCB-050B-PFF-T Linear Current Sensor Module
- Nearly zero magnetic hysteresis, extremely stable output offset voltage
- Output voltage proportional to AC or DC currents
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #10
ACS712 Hall Effect Current Sensor Module 5A 20A 30A Range + Voltage Sensor Module DC0-25V Voltage Tester Terminal Sensor for Arduino
Asin: B096XW328X | Model: DP162 | PartNumber: DP162 | Ean: 0779139596585 | UPC: 779139596585
【Current Sensor Module】Chip: Acs712elc-05A，Measuring Range: ±5 Amps, Corresponding Analog Output:185Mv/A.--- Acs712elc-20A，Measuring Range: ±20 Amps, Corresponding Analog Output:100Mv/A.--- Acs712elc-30A，Measuring Range: ±30 Amps, Corresponding Analog Output:66Mv/A..
【Pls Note】: Acs712 Is Based On The Principle Of Hall Detection, Please Avoid The Influence Of Magnetic Field When Using It!.
【Voltage Sensor Module】Voltage Input Range: Dc0-25V; Voltage Detection Range: Dc0.02445V-25V; Voltage Analog Resolution: 0.00489V; Dc Input Connector: Terminal Cathode Connected To Vcc, Gnd Negative Pole; Output Interface: "+" Then 5/3.3V, "-" Then Gnd, "S" Then The For Arduino Ad Pins..
【Package Included】1Pcs X 30A,1Pcs X 20A, 1Pcs X 5A Acs712 Current Sensor Module, And 1Pcs X Voltage Sensor Module Dc0-25V Voltage Tester Terminal Sensor.
Features
- Perfect Combination Using this product can measure both voltage and current, very suitable for DIY electronic design projects.
- Package Included 1pcs x 30A,1pcs x 20A, 1pcs x 5A ACS712 Current Sensor Module, and 1pcs x Voltage Sensor Module DC0-25V Voltage Tester Terminal Sensor
- Current Sensor Module Chip: ACS712ELC-05A Measuring range: 5 amps, corresponding Analog output:185mV/A.--- ACS712ELC-20A Measuring range: 20 amps, corresponding Analog output:100mV/A.--- ACS712ELC-30A Measuring range: 30 amps, corresponding Analog output:66mV/A.
- Voltage Sensor Module Voltage input range: DC0-25V; Voltage detection range: DC0.02445V-25V; Voltage Analog Resolution: 0.00489V; DC input connector: Terminal cathode connected to VCC, GND negative pole; Output interface: + then 5/3.3V, - then GND, s then the for Arduino AD pins.
- Pls Note : ACS712 is based on the principle of Hall detection, please avoid the influence of magnetic field when using it!
- See more on Amazon...
Brand: Jingzan | Manufacturer: Yowming
See On Amazon #11
Adafruit INA169 Analog DC Current Sensor Breakout - 60V 5A Max
Asin: B00NAY3FSM | Model: 100633 | PartNumber: 100633 | Ean: 0701851952882, 3700386511646, 7107564696618 | UPC: 701851952882
Rated For 2W Continuous So You Can Measure Up To +5A Continuous.
0.1 Ohm, 1% 2W Current Sense Resistor.
Ideal Breakout For Feedback-Loop Control.
Features
- Measure both the DC current draw and have a handy analog output that is with respect to ground
- Ideal breakout for feedback-loop control
- Rated for 2W continuous so you can measure up to +5A continuous
- 0.1 ohm, 1% 2W current sense resistor
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 0.20 x 3.54 x 2.36 inches | Weight: 0.01 pounds
See On Amazon #12
Current Sensing Switch, Normally Open Current Sensing Switch Adjustable AC 0.2-30A SZC23-NO-AL-CH
Asin: B07P87TG8F | Ean: 0724942218735 | UPC: 724942218735
The Switch Has No Limit On The Number Of Opening And Closing, And The Speed Reaches The Ms Level.The Outer Casing Is Made Of Self-Extinguishing Material Abs..
Suitable For Ac Current Measurement And Monitoring, Ac Motor Overload Protection, Electronic Switch Of Automatic Control System And So On..
High-Power Mos Tube Contactless Electronic Switch.Straight-Through Structure Design, Isolation Withstand Voltage Up To 2000V..
Led Indicator Can Conveniently And Intuitively Indicate The Working Status Of The Switch.Hysteresis Is Less Than 1% And Can Be Used Under Strong Magnetic Conditions..
Features
- Self-powered, no external power supply required.Action current 0.2-30A AC, adjustable with a potentiometer.
- LED indicator can conveniently and intuitively indicate the working status of the switch.Hysteresis is less than 1% and can be used under strong magnetic conditions.
- The switch has no limit on the number of opening and closing, and the speed reaches the ms level.The outer casing is made of self-extinguishing material ABS.
- High-power MOS tube contactless electronic switch.Straight-through structure design, isolation withstand voltage up to 2000V.
- Suitable for AC current measurement and monitoring, AC motor overload protection, electronic switch of automatic control system and so on.
- See more on Amazon...
Brand: Walfront | Manufacturer: Walfront
Dimensions: 0.98 x 2.56 x 1.97 inches | Weight: 0.13 pounds
See On Amazon #13
Gikfun DIY 5A Range AC Current Transformer Module for Arduino (Pack of 5pcs) EK1344x5
Asin: B00UT7U982 | Model: LYSB00UT7U982-ELECTRNCS | PartNumber: LYSB00UT7U982-ELECTRNCS | Ean: 0634894431154 | UPC: 634894431154
The Module Can Measure Ac Currents Less Than 5A, The Corresponding Analog Output 5A/5Ma.
80 Ohm Resistor.
Pack Of 5Pcs.
Onboard Precision Micro Current Transformer.
Features
- It's diy kits, need to solder by yourself
- onboard precision micro current transformer
- the module can measure AC currents less than 5A, the corresponding analog output 5A/5mA
- Pack of 5pcs
- 80 Ohm resistor
- See more on Amazon...
Brand: Gikfun | Manufacturer: Esooho
Dimensions: 3.20 x 4.50 x 0.40 inches | Weight: 0.02 Pounds
See On Amazon #14
NOYITO Voltage Transformer Module Active Single Phase Output Voltage Sensor Module - Measure 0-250V AC Voltage - Output Sine Wave Adjustable
Asin: B07D1WP884 | Model: NOVTM0250 | PartNumber: NOVTM0250 | Ean: 0667797750312 | UPC: 667797750312
Analog Voltage Output: The Module Can Measure Ac Voltage Within 250V And The Corresponding Analog Output Can Be Adjusted.
【One-Year After-Sale Warranty】Module Supply Voltage: 5-30V.
Output Signal: The Output Signal Is A Sine Wave, And The Median Value Of The Waveform (Dc Component) Is 1/2 Vcc..
Op Amp Circuit: On-Board High-Precision Op Amp Circuit, Accurate Sampling And Proper Compensation Of Signals..
Features
- Product Name: On-board precision voltage transformer.
- Op amp circuit: On-board high-precision op amp circuit, accurate sampling and proper compensation of signals.
- Analog voltage output: The module can measure AC voltage within 250V and the corresponding analog output can be adjusted
- Output signal: The output signal is a sine wave, and the median value of the waveform (DC component) is 1/2 VCC.
- One-year After-sale Warranty Module supply voltage: 5-30V
- See more on Amazon...
Brand: NOYITO | Manufacturer: NOYITO
Dimensions: 0.77 x 1.95 x 0.79 Inches
Warranty: Manufacturer's One-year After-sale Warranty.
See On Amazon #15
HiLetgo 3pcs ZMCT103C 5A AC Current Sensor Current Transformer Module Single Phase Active Analog Signal Output with OP Amp
Asin: B0CDWWYLMQ | Model: 3-01-1817 | PartNumber: 3-01-1817
On-Board Micro-Precision Current Transformer And Sampling Resistor.
Single Phase Active Analog Signal Output With Op Amp.
5A Can Be Measured Within An Alternating Current, The Analog Output Corresponding To 5A/5Ma.
Features
- ZMCT103C 5A AC Current Sensor Current Transformer Module
- 5A can be measured within an alternating current, the analog output corresponding to 5A/5mA
- On-board micro-precision current transformer and sampling resistor
- Single Phase Active Analog Signal Output with OP Amp
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #16
Current Transmitter, FCS521-SD-5V Current Transducer Transmitter Transformer Sensor AC Current Converter 0-50A
Asin: B0B57ZNBLQ | Model: 3395597999460 | PartNumber: 3395597999460 | Ean: 3395597999460
Installation And Using Are Easy And Convenient, There Is No Need To Connect The Dc Series Into The Circuit During Measurement.Through-Heart Structure Design, Isolation Withstand Voltage Up To 2000V Ac..
It Is Suitable For Various Applications Requiring Current And Voltage Conversion.It Has The Characteristics Of Strong Overload Ability, High Precision, High Isolation, High Security, Low Power Consumption And Strong Anti-Interference Ability..
The Outer Casing Is Made Of Self-Extinguishing Material, Safe And Durable.It Is Used For Ac Current Monitoring, Detection, Current Overload Protection, And Is Also Used As An Electronic Switch For Automatic Control Systems..
The Measured Current Ac: 0-10A / 20A / 50A Can Be Selected.Output Signal Dc: 0-5V / 0-10V /4-20Ma Three Forms Are Available..
Features
- Mutual inductance current monitoring, high current detection accuracy, stable performance, safe isolation of input and output.Magnetic hysteresis less than 1%, can be used in strong magnetic field conditions.
- The measured current AC: 0-10A / 20A / 50A can be selected.Output signal DC: 0-5V / 0-10V /4-20mA three forms are available.
- Installation and using are easy and convenient, there is no need to connect the dc series into the circuit during measurement.Through-heart structure design, isolation withstand voltage up to 2000V AC.
- The outer casing is made of self-extinguishing material, safe and durable.It is used for AC current monitoring, detection, current overload protection, and is also used as an electronic switch for automatic control systems.
- It is suitable for various applications requiring current and voltage conversion.It has the characteristics of strong overload ability, high precision, high isolation, high security, low power consumption and strong anti-interference ability.
- See more on Amazon...
Brand: Nodehawk | Manufacturer: Nodehawk
Dimensions: 2.44 x 3.54 x 1.02 inches
See On Amazon #17
AC Current Sensor Transformer, Core Current Transformer Coil Sensor for 200A Amp Energy Meter
Asin: B0B91R55TS | Model: 3395597999613 | PartNumber: 3395597999613 | Ean: 3395597999613
Good Mechanical Properties: Fully Enclosed, Good Mechanical Properties And Environmental Resistance, Strong Voltage Isolation Capability, Safety And Reliability..
Mini Size:This Is A Mini Split Base Current Transformer; It's The Smallest One Compared To The Similar Products (Output 5Ma)..
Used For Energy Meter In Special: Current Transducer Used For Energy Meter In Special; Ac 220V, 380V Power Supply Can Both Be Applied..
Snap Joint Structure:The Diameter Of Inner Hole Is 24Mm, The Accuracy Is 0.5 Grade, Using Snap Joint Structure, It Can Be Fixed To The Cable Directly Through Nylon Ties..
Features
- SMALL AND LIGHT: This current transformer Built-in input coil; small and light, easy to install.
- SNAP JOINT STRUCTURE:The diameter of inner hole is 24mm, the accuracy is 0.5 grade, Using snap joint structure, it can be fixed to the cable directly through nylon ties.
- GOOD MECHANICAL PROPERTIES: Fully enclosed, good mechanical properties and environmental resistance, strong voltage isolation capability, safety and reliability.
- USED FOR ENERGY METER IN SPECIAL: Current transducer used for energy meter in special; AC 220v, 380v power supply can both be applied.
- MINI SIZE:This is a mini split base current transformer; it's the smallest one compared to the similar products (output 5MA).
- See more on Amazon...
Brand: nodehawk | Manufacturer: nodehawk
Dimensions: 1.26 x 2.56 x 2.13 inches | Weight: 0.50 pounds
See On Amazon #18
HiLetgo 2pcs MAX4080SASA Current Module Current Sensor Amplifier High Accuracy Highly Integrated Voltage Current Source
Asin: B09KLS4LCH | Model: 3-01-1715 | PartNumber: 3-01-1715
Max4080 Offer Users A Highly Integrated, Simple, Accurate, And Compact Current Sensing Solution..
Three Different Gains (5V/V, 20V/V, 60V/V, Chip Silkscreen Suffixes Are Indicated By F, T, S Respectively) Support User Select External Sensor Resistors And It's Easy To Set The Full-Scale Current And Proportional Output Voltage..
Max4080's Single Output Pin Continuously Monitors The Entire Charge-To-Discharge Process Without Additional Polarity Output..
Features
- MAX4080 are a high-side current-Sensor amplifiers with an input voltage range of 4.5V to 76V
- MAX4080's single output pin continuously monitors the entire charge-to-discharge process without additional polarity output.
- MAX4080 offer users a highly integrated, simple, accurate, and compact current sensing solution.
- Three different gains (5V/V, 20V/V, 60V/V, chip silkscreen suffixes are indicated by F, T, S respectively) support user select external Sensor resistors and it's easy to set the full-scale current and proportional output voltage.
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #19
DAOKAI 5 Pcs ACS712 20A Range Current Sensor Module Chip ACS712ELC-20A Hall Current Sensor Current Measuring Module with Dupont Cable for Arduino
Asin: B0B2NS74TL | Model: WE-DA-081A | PartNumber: WE-DA-081A
⚡[Special Reminder] Acs712 Is Based On The Principle Of Hall Detection, Try To Avoid The Influence Of Magnetic Field When Using It..
⚡[Package Includes]You Will Get 5 X Acs712 20A Range Current Sensor Module, 1 X 15Pin Female To Male Dupont Cable..
⚡[Applications]Load Detection And Management In The Field Of Electric Motors, And Overcurrent Fault Protection In The Field Of Switching Power Supplies And Various Electronic Products..
⚡[Accuracy Range (Ip)]The Module Can Measure Positive And Negative 20A Current, Corresponding To Analog Output 100Mv/A; Ip=0A, That Is, When There Is No Detection Current Passing, The Output Voltage Is Vcc/2..
Features
- [Product]Name : Current Sensor Module; Model : ACS712, Range Current : 20A, Current sensor chip: ACS712ELC-20A.
- [Accuracy range (IP)]The module can measure positive and negative 20A current, corresponding to analog output 100mV/A; IP=0A, that is, when there is no detection current passing, the output voltage is VCC/2.
- [Special reminder] ACS712 is based on the principle of Hall detection, try to avoid the influence of magnetic field when using it.
- [Applications]load detection and management in the field of electric motors, and overcurrent fault protection in the field of switching power supplies and various electronic products.
- [Package includes]You will get 5 x ACS712 20A Range Current Sensor Module, 1 x 15Pin Female to Male Dupont Cable.
- See more on Amazon...
Brand: DAOKAI | Manufacturer: DAOKAI
See On Amazon #20
EC Buying 10PCS IR Infrared Sensor Module Slotted Optical Optocoupler Speed Measuring Sensor Module Photo Interrupter Sensor Motor Speed Detection Robot for Arduino
Asin: B0CHDRF497
Using Schmidt Trigger To Jitter Pulses Is Very Stable And Can Be Used For Small Car Speed Measurement, Distance Measurement, And Other Applications!.
Working Voltage: 3.3V-5V, Output Form: Digital Switch Output (0 And 1).
Install Holes With M3 Screws At Both Ends..
As Long As A Non-Transparent Object Passes Through The Slot, It Can Trigger To Output A Low Ttl Level..
Features
- Adopting a slot type photoelectric sensor, it consists of an infrared light-emitting diode and an NPN photoelectric transistor, with a slot width of 5.9mm.
- As long as a non-transparent object passes through the slot, it can trigger to output a low TTL level.
- Using Schmidt trigger to jitter pulses is very stable and can be used for small car speed measurement, distance measurement, and other applications!
- Install holes with M3 screws at both ends.
- Working voltage: 3.3V-5V, output form: digital switch output (0 and 1)
- See more on Amazon...
Brand: EC Buying | Manufacturer: EC Buying
See On Amazon
Looking For Something Else?
Search