2Pcs Bimetal Nozzle Throat, M6 Thread Bimetal Heat Break Heatbreak Tube 3D Printer Extruders Accessory for CR 6 SE 1.75mm Hot End
Asin: B0D1VPX765
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【No More Leakage】The Heat Break Throat Consisting Of 2 Parts, The Bimetal Heat Break Has Less Connector To Effectively Prevent Leakage, Very Reliable. If You Need Some Nozzle Throats, This Product Can Provide You With Good Using Experience..
【Easy To Install】The 3D Printer Replacement Part Comes With A Light Weight And A Compact Size As Well, The Easy Installation Can Be Quickly Finished In Minutes. You Do Not Need Complicated Procedures When You Install It..
【Bi-Metal Heatbreak】The Bimetal Heatbreak Tube Front's End Is Made From Ti Alloy And The Rear End Is Made From Copper, Making The Heat Dissipation Simpler. You Can Use It With Confidence..
【Perfect Fitting】The 3D Printer Hot End Parts Suits Perfectly For Cr 6 Se 1.75Mm Hot End, The Heatbreak Tube Has Excellent Durability Against Wearing. It's A Good Choice For You To Choose These Heatbreak Tubes..
Features
- Exquisite Craft The 3d printer throat nozzle has the fine workmanship, the nozzle throat with 0.3 inner hole finish enables a large torsion up to 10kg. It can bring you a new and different using feeling.
- Perfect Fitting The 3d printer hot end parts suits perfectly for cr 6 se 1.75mm hot end, the heatbreak tube has excellent durability against wearing. It's a good choice for you to choose these heatbreak tubes.
- No More Leakage the Heat Break Throat Consisting of 2 parts, the bimetal heat break has less connector to effectively prevent leakage, very reliable. If you need some Nozzle Throats, this product can provide you with good using experience.
- Bi-Metal Heatbreak The Bimetal Heatbreak Tube front's end is made from Ti alloy and the rear end is made from copper, making the heat dissipation simpler. You can use it with confidence.
- Easy to Install The 3d printer replacement part comes with a light weight and a compact size as well, the easy installation can be quickly finished in minutes. You do not need complicated procedures when you install it.
- See more on Amazon...
Brand: Agatige | Manufacturer: Agatige
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.02 pounds
See On Amazon Similar To 2Pcs Bimetal Nozzle Throat M6
#1
1piece Hardened Steel Nozzle V6 Nozzle 0.25/0.4/0.5/0.6mm for 1.75mm V6 Hotend Prusa Printing PEI PEEK or Carbon Fiber Filament use (1x 0.6mm)
Asin: B07QPRNLFV | Model: V6 | PartNumber: V6 | Ean: 8011673632124
Including 1 Piece Nozzle.
Nozzle Size: 0.25Mm, 0.4Mm, 0.5Mm. 0.6Mm.
Features
- The nozzle size is marked with Dot's quantity
- Nozzle size: 0.25mm, 0.4mm, 0.5mm. 0.6mm
- including 1 piece nozzle
- See more on Amazon...
Brand: POLISI3D | Manufacturer: POLISI
See On Amazon #2
AFUNTA 15 PCS M6 3D Printer Stainless Steel Nozzles Print Heads Extruder Compatible 1.75mm Makerbot & ANET A8, 5 Sizes (0.2/0.4/0.6/0.8/1.0mm) + 5 Sizes Cleaning Needles
Asin: B07J58R1JX | Model: AF-stainless-steel-nozzle | PartNumber: AF-stainless-steel-nozzle
Material And Size: These Printers' Nozzles Are Made Of Stainless Steel, Out Thread: M6, Filament Diameter: 1.75Mm, Output Diameter: 0.2Mm, 0.4Mm, 0.6Mm, 0.8Mm, 1.0Mm..
Premium Quality: The Cleaning Needles Are Made Of High Quality Stainless Steel, Flexible, Sturdy And Durable. With A Handle, You Can Twist The Drill When Using..
Nozzle Cleaning Needles: 5 Pieces Cleaning Needles Have 5 Different Size: 0.2 Mm, 0.4Mm, 0.6Mm And 0 .8Mm, Suitable For Cleaning Most Of Your 3D Printer Nozzles..
Note: After Replacing The Nozzle, Please Recalibrate The Distance Between Nozzle And Build Plate To Ensure The Quality Of Print Parts..
Features
- COMPATIBILITY: This printer nozzles are compatible with Anet A8, Tevo Tarantula, E-3D makerbot, duplicator, prusa i3 and reprap printer.
- NOTE: After replacing the nozzle, please recalibrate the distance between nozzle and build plate to ensure the quality of print parts.
- MATERIAL AND SIZE: These printers' nozzles are made of stainless steel, Out Thread: M6, Filament Diameter: 1.75mm, Output Diameter: 0.2mm, 0.4mm, 0.6mm, 0.8mm, 1.0mm.
- NOZZLE CLEANING NEEDLES: 5 pieces cleaning needles have 5 different size: 0.2 mm, 0.4mm, 0.6mm and 0 .8mm, suitable for cleaning most of your 3D Printer nozzles.
- PREMIUM QUALITY: The cleaning needles are made of high quality stainless steel, flexible, sturdy and durable. With a handle, you can twist the drill when using.
- See more on Amazon...
Brand: AFUNTA | Manufacturer: AFUNTA
Weight: 0.04 pounds
See On Amazon #3
2PCS Water Outlet Nipple Nozzle Motor Cooling Water Valve M6 or M8 for RC Boat Marine DIY in Silver (M6)
Asin: B0CZLXD9L7
Features:Motor Cooling Water Nipple Nozzle With Rubber Sealing Ring To Prevent Water Leakage.
Size:M6.
Package Includes 2 Piece Of Outlet Nozzle For Rc Boat.
Application:Water Drainage Outlet Nozzle Used For Electric, Methanol, Gasoline Rc Boat.
Features
- Material:water cooling Nipple is made of aluminum alloy
- Application:Water Drainage Outlet Nozzle used for electric, methanol, gasoline RC Boat
- Features:Motor Cooling Water Nipple Nozzle with rubber sealing ring to prevent water leakage
- Package includes 2 piece of Outlet Nozzle for RC Boat
- Size:M6
- See more on Amazon...
Brand: Generic | Manufacturer: yc.tx
Dimensions: 2.00 x 1.00 x 1.00 inches
See On Amazon #4
1pc 500 M6 Plated Copper Nozzle 0.4mm Non-Stick High Temperature Compatible with 1.75mm V6 hotend Prusa i3 MK3 MK3S BLV MGN Cube 3D Printer (0.4mm)
Asin: B07WV9PXBK | Model: V6-plated copper nozzle | PartNumber: V6-plated copper nozzle | Ean: 0791300409616 | UPC: 791300409616
Compatible With 1.75Mm M6 Thread V6 Hotend 3D Printer, Um2+ Series 3D Printer.
Pack: 1Piece.
Non- Stick, High Performance, High Temperature About 500Degree, Excellent Precision Production,.
Nozzle Size: 0.4Mm； Material: Copper, Nickel Based Plating.
Features
- The nozzle size is marked with number
- Nozzle size: 0.4mm Material: Copper, Nickel based plating
- Compatible with 1.75mm M6 thread V6 hotend 3D printer, UM2+ series 3D Printer
- Non- stick, high performance, high temperature about 500degree, Excellent precision production,
- Pack: 1piece
- See more on Amazon...
Brand: POLISI3D | Manufacturer: POLISI3D
See On Amazon #5
Upgraded Bimetallic Nozzle 0.6 MM Hardened Steel Copper Plated, Compatible with 1.75 mm V6 Hot End Prusa I3 MK3S Anycubic Kobra Go 3D Printing
Asin: B0CF49SNFT | Ean: 0728224970298 | UPC: 728224970298
The Flat Surface Seamless Connection Without Filament Leakage,The Fflat Surface And Tight Joints Effectively Solve The Divulge Problem..
Suitability And Compatibility: Our Nozzles Fit M6 Threaded V6 Hot End, Ender Series Cr-10, I3 I3 Mega I3 And Other Diy 3D Printers, And Are Compatible With All 1.75Mm Pla Abs 3D Printers..
Durable And Heat-Resistant, Suitable For Various Wire Materials Copper Alloy Can Withstand Heat Up To 500 ℃,And Quenched Steel Can Withstand Heat Up To 450 ℃. It Can Be Used With Various Wire Materials For Printing..
Impeccable Precise Orifice,Orifice Has No Burrs And The Feeding Is Smoother..
Features
- The Inner Wall Is Smoother And Not Clogged,wall Roughness Ra<0.4 Enhances.The flowability of the wirematerial,Resulting in ultra smooth extrusion.
- Impeccable precise orifice,orifice has no burrs and the feeding is smoother.
- The flat surface seamless connection without filament leakage,The fFlat surface and tight joints effectively solve the divulge problem.
- Durable and Heat-Resistant, suitable for various wire materials copper alloy can withstand heat up to 500 ,And quenched steel can withstand heat up to 450 . It can be used with various wire materials for printing.
- Suitability and Compatibility: Our nozzles fit M6 threaded V6 Hot End, Ender Series Cr-10, I3 I3 Mega I3 And Other Diy 3d Printers, and Are Compatible With All 1.75mm Pla Abs 3d Printers.
- See more on Amazon...
Brand: Xirbbo | Manufacturer: xirbbo
See On Amazon #6
Micro Swiss Plated A2 Hardened Tool Steel Nozzle RepRap - M6 Thread 1.75mm Filament 0.4mm
Asin: B07CGCBPLN | Model: M2573-04 | PartNumber: M2573-04 | Ean: 0814358017012, 7432114996956, 7432114796723 | UPC: 814358017012
1.75Mm Filament / M6 Threads.
Made In Usa By Micro Swiss.
Orifice Size: .4Mm.
Fits: E3d 1.75Mm Hotend V5-V6, Prusa I3.
Features
- A2 Hardened Tool Steel Nozzle Plated with TwinClad XT
- Fits: E3D 1.75mm Hotend V5-V6, Prusa i3
- 1.75mm Filament / M6 Threads
- Orifice size: .4mm
- Made in USA by Micro Swiss
- See more on Amazon...
Brand: Micro-Swiss | Manufacturer: Micro Swiss LLC
Dimensions: 0.50 x 2.00 x 0.50 inches | Weight: 0.02 pounds
See On Amazon #7
UniTak3D Ender 3 Heatbreak All Metal Smooth Upgrade Titanium and Copper Bimetal Throat Nozzle for Ender 3 V2,Ender 3 Pro,CR10 3D Printer Hotend(Pack of 2Pcs)
Asin: B09JVPBHQZ
【Bimetal Material Advantage】:The All Metal Heat Break Is Made Of Titanium Alloy And Copper .Titanium Alloy Is Used To Reduce Heat Conduction Upward From The Heating Block, And Gold-Plated Copper Is Used To Accelerate Heat Conduction..
【Note】: Pla Is Not Recommended. The Heat Break In The Clone Version Cannot Completely Avoid Pla Clogging When Retracting..
【Easy Installation】:This Throat Nozzle Can Be Direct Replacement For Your Ender 3 And Cr10 3D Printers..
【Application】:The Bimetal Titanium Heat Break Is Compatible With Ender 3 V2,Ender 3 Pro,Ender 3 Cr10 Series 3D Printer..
Features
- All-metal Heat Break Advantages :The all metal heat break works well with high-temp filaments. There is no Teflon to wear or burn,high temperature resistance up to 420 .
- Application :The bimetal titanium heat break is compatible with Ender 3 V2,Ender 3 Pro,Ender 3 CR10 series 3D printer.
- Bimetal Material Advantage :The all metal heat break is made of Titanium Alloy and Copper .Titanium alloy is used to reduce heat conduction upward from the heating block, and gold-plated copper is used to accelerate heat conduction.
- Easy Installation :This throat nozzle can be direct replacement for your Ender 3 and CR10 3D Printers.
- NOTE : PLA is NOT recommended. The heat break in the clone version cannot completely avoid PLA clogging when retracting.
- See more on Amazon...
Brand: UniTak3D | Manufacturer: UniTak3D
See On Amazon #8
4pcs Hardened Steel Nozzles M6 Thread Nozzle 0.6mm 0.8mm for 1.75mm V6 Nozzle Hotend Prusa Printing PEI PEEK or Carbon Fiber Filament use (2x0.6 +2x0.8)
Asin: B08FBC6CRQ | Model: p-769 | PartNumber: p-769
Including 2 Pieces 0.6Mm And 2Pieces 0.8Mm, For 1.75Mm Filament Use.
The Nozzle Is Made From Hardened Steel Nozzle, Black Surface Treatment..
Nozzle Size: 0.6Mm, 0.8Mm.
Features
- The nozzle size is marked with Dot's quantity, 0.6(4 dots),0.8mm(5dots)
- Nozzle size: 0.6mm, 0.8mm
- including 2 pieces 0.6mm and 2pieces 0.8mm, for 1.75mm filament use
- The nozzle is made from Hardened steel nozzle, black surface treatment.
- See more on Amazon...
Brand: POLISI3D | Manufacturer: POLISI3D
See On Amazon #9
AEDIKO 2pcs CR6 SE Bimetal Heatbreak Upgrade All Metal Heatbreak Titanium Alloy and Copper Bimetal Throat Nozzle for 3D Printer CR-6 SE/Max/CR-5 PRO Hotend Parts
Asin: B0CJ6FD8LF | Ean: 0687117722713 | UPC: 687117722713
Bimetal Material Advantage: The All Metal Heat Break Is Made Of Titanium Alloy And Copper .Titanium Alloy Is Used To Reduce Heat Conduction Upward From The Heating Block And Gold-Plated Copper Is Used To Accelerate Heat Conduction.
For 1.75Mm Filament：Cr6 Se Bimetal Heatbreak Inner Hole Finish Is 0.3 And The Torque Is More Than 10Kg, Long Threaded Part Thread Is M7, Short Threaded Part Is M6, Could Print 1.75Mm Filament Fast And Safely.
All-Metal Heat Break Advantages: All Metal Heat Break Works Well With High-Temp Filaments. High Temperature Resistance,Integrated Design Refused To Jamming And Improve Printing Efficiency.
High Quality: Thermal Heat Break Is Made From High Quality Titanium Alloy + Plated Copper,Real Bimetal Material ,Combined With 2 Components To Provide Excellent Thermal Isolation Between Heater And Cooling Block.
Features
- Application:CR6 SE Bimetal Heatbreak is Compatible with 3D Printer CR-6 SE, CR-6 Max, CR-5 PRO CR10 Smart, Ender 3 Neo, Ender 3 V2 Neo, Ender 3 Max Neo 3D Printer
- High Quality: Thermal Heat Break is Made From High Quality Titanium Alloy + Plated Copper,Real Bimetal Material ,Combined with 2 Components to Provide Excellent Thermal Isolation Between Heater and Cooling Block
- Bimetal Material Advantage: The All Metal Heat Break is Made of Titanium Alloy and Copper .Titanium Alloy is Used to Reduce Heat Conduction Upward From the Heating Block and Gold-Plated Copper is Used to Accelerate Heat Conduction
- All-Metal Heat Break Advantages: All Metal Heat Break Works Well With High-Temp Filaments. High Temperature Resistance,Integrated Design Refused to Jamming and Improve Printing Efficiency
- for 1.75mm Filament CR6 SE Bimetal Heatbreak Inner Hole Finish is 0.3 and the Torque is more than 10kg, Long Threaded Part Thread is M7, Short Threaded Part is M6, Could Print 1.75mm Filament Fast and Safely
- See more on Amazon...
Brand: AEDIKO | Manufacturer: AEDIKO
See On Amazon #10
GO-3D M6 0.4mm ZS Nozzle Hardened Steel Copper Alloy for V6 Hotend 3D Printer
Asin: B0BHF9WJWP | Model: TL-ZS-M6-0.4 | PartNumber: TL-ZS-M6-0.4 | Ean: 0799924451493 | UPC: 799924451493
Support 500°C High Temperature, Wear Resistant, Abrasion Resistant, Corrosion Resistant.
Designed By Go-3D Print In California.
Compatible With V6 Hotend And Most Of The 3D Printers Using M6 Tread Hotend.
Nozzle Detail: Hardened Steel Nickel Plated And Body Is Copper Alloy.
Features
- Orifice size 0.4mm, Thread: M6, Filament size: 1.75mm
- Nozzle Detail: Hardened Steel Nickel Plated and Body is Copper Alloy
- Support 500 C High Temperature, Wear Resistant, Abrasion Resistant, Corrosion Resistant
- Compatible with V6 hotend and most of the 3d printers using M6 tread hotend
- Designed by GO-3D Print in California
- See more on Amazon...
Brand: GO-3D PRINT | Manufacturer: GO-3D PRINT
Dimensions: 0.31 x 0.59 x 0.31 inches | Weight: 10.00 Grams
See On Amazon #11
V6 Titanium Alloy Bimetal Heat Break Throat Thread Heatbreak Heater Block Metal Throat 1.75mm Nozzle for V6 Hotend 3D Printer (V6 Bimetal)
Asin: B0CJV77SS9 | Ean: 0761241888399 | UPC: 761241888399
Compatibility:This Heatbreak Is Used For The 1.75Mm V6 Hotend..
Package Included: 1 Piece Upgrade Bi-Metal Heatbreak.
Plated Copper Heatsink:Two Components With Different Thermal Conductivity.Improve Heat Dissipation Efficiency.
Features
- Bi-metal Material Advantage: It is made of Titanium Alloy and Copper .Titanium alloy is used to reduce heat conduction upward from the heating block, and gold-plated copper is used to dissipate heat to accelerate heat conduction.
- Plated Copper Heatsink:Two components with different thermal conductivity.improve heat dissipation efficiency
- compatibility:This heatbreak is used for the 1.75mm V6 Hotend.
- Package included: 1 piece Upgrade Bi-metal heatbreak
- See more on Amazon...
Brand: Rirsoasy | Manufacturer: Rirsoasy
See On Amazon #12
Micro Swiss M2 Hardened High Speed Steel Nozzle RepRap - M6 Thread 1.75mm Filament V6 (.6mm)
Asin: B07ZVZ1LQX | Model: M2600-06 | PartNumber: M2600-06 | Ean: 0769407527618 | UPC: 769407527618
Orifice Size: 0.6Mm.
Made In Usa By Micro Swiss.
Limited Lifetime Warranty Against Wear.
Fits: All Printers With V4 / V5 / V6 1.75 Hotend / Prusa I3 Mk2 / Mk2s / Mk3.
Features
- M2 Hardened High Speed Steel with Electroless Nickel plating and WS2 coating
- Fits: All printers with V4 / V5 / V6 1.75 Hotend / Prusa i3 MK2 / MK2S / MK3
- Orifice size: 0.6mm
- Limited lifetime warranty against wear
- Made in USA by Micro Swiss
- See more on Amazon...
Brand: Micro-Swiss | Manufacturer: Micro Swiss LLC
Dimensions: 5.12 x 3.94 x 8.66 inches
See On Amazon #13
AIEX 2pcs All Metal Smooth Heatbreak, Bimetal Heatbreak Titanium Alloy and Copper Heatbreak Throat for Ender 3 V2 Ender 3 Pro CR10 3D Printer Hotend
Asin: B09V46R7YR
Conducts Heat Quickly: The V6 Heatbreak Is Made Of Titanium Alloy And Copper. Titanium Alloy Is Used To Reduce The Heat Conduction Upward From The Heating Block, While Copper Is Used To Accelerate The Heat Conduction. Accelerate The Heat Conduction. The Thermal Conductivity Of Tc4 Is About I=7.955W/M·K..
Applicable Models: The Titanium Alloy And Copper Heatbreak Is Compatible With Ender 3 V2, Ender 3 Pro, Ender 3 Cr10 Series 3D Printers, The Thread Size Is M6..
Easy To Install: This Heatbreak Is A Direct Replacement For Your Ender 3 And Cr10 3D Printer, And The Bayonet Design Allows Screws To Be Screwed Into Place For Easy Removal..
High Temperature Resistance: All Metal Heat Heatbreak Works Well With High Temperature Filament. No Teflon Wear Or Burn, High Temperature Resistance Up To 450-500 Degrees, Can Better Show Its Performance When Matching Capricornus..
Features
- High-quality Alloy: The composition of TC4 titanium alloy material is Ti-6Al-4V, which belongs to (a+b) type titanium alloy, with good comprehensive mechanical properties and high specific strength. The intensity of TC4: sb=1.
- High Temperature Resistance: All metal heat heatbreak works well with high temperature filament. No Teflon wear or burn, high temperature resistance up to 450-500 degrees, can better show its performance when matching Capricornus.
- Conducts Heat Quickly: The V6 heatbreak is made of titanium alloy and copper. Titanium alloy is used to reduce the heat conduction upward from the heating block, while copper is used to accelerate the heat conduction. accelerate the heat conduction. The thermal conductivity of TC4 is about I=7.955W/m K.
- Easy to Install: This heatbreak is a direct replacement for your Ender 3 and CR10 3D Printer, and the bayonet design allows screws to be screwed into place for easy removal.
- Applicable Models: The titanium alloy and copper heatbreak is compatible with Ender 3 V2, Ender 3 Pro, Ender 3 CR10 series 3D printers, the thread size is M6.
- See more on Amazon...
Brand: AIEX | Manufacturer: AIEX
See On Amazon #14
BIQU Custom M4 Hardened Steel Nozzle 0.6mm for H2 V2S Lite, 20mm Long, High Flow Nozzle All Metal Hotend Kit 3D Printer Part
Asin: B0CFZVQBKN
➤Made Of Hardened Tungsten Steel, This M4 Nozzle Is Harder, More Heat-Resistant And Durable. It Is Also Compatible With More Filaments And Has Longer Service Life Than The Normal Brass Nozzle..
➤Please Feel Free To Contact Us When You Have Any Problems During Using, We Are Always Ready For Help..
➤Max Temperature Of This Hardened Steel Nozzle Could Reach Up To 450C, Making It Suitable For High-Temperature Printing, Compatible Material From Pla,Abs To Carbon Fiber, Even Peek..
➤Thin-Walled Design Contributes To More Sensitive Heat Conductivity..
Features
- This custom M4 Hardened Steel Nozzle 0.6mm is for BIQU H2 V2S Lite extruder.
- Thin-walled design contributes to more sensitive heat conductivity.
- Made of hardened tungsten steel, this M4 nozzle is harder, more heat-resistant and durable. It is also compatible with more filaments and has longer service life than the normal brass nozzle.
- Max temperature of this hardened steel nozzle could reach up to 450c, making it suitable for high-temperature printing, compatible material from PLA,ABS to carbon fiber, even PEEK.
- Please feel free to contact us when you have any problems during using, we are always ready for help.
- See more on Amazon...
Brand: BIQU | Manufacturer: BIQU
See On Amazon #15
1pc M6 Plated Copper Nozzle 0.4mm Non-Stick High Temperature Compatible with V6 hotend Anycubic Chiron MEGA S/Zero 2.0 / Prusa I3 MK3S Prusa Mini Mini+ BLV Cube 3D Printer (0.4mm)
Asin: B08X4N2VJL | Model: EV6-plated copper nozzle | PartNumber: EV6-plated copper nozzle | Ean: 0791548327314 | UPC: 791548327314
Compatible With 1.75Mm M6 Thread V6 Hotend, Prusa I3 Mk3 Mk3s , Prusa Mini , Prusa Mini+ Printer.
Pack: 1Piece.
Non- Stick, High Performance, High Temperature About 500Degree, Excellent Precision Production,.
Material: Copper, Plated; Nozzle Size: 0.4Mm.
Features
- The nozzle size is marked with dots: 0.4(3 dots); 0.6mm(4dots) ;0.8mm(5dots)
- Material: Copper, Plated; Nozzle size: 0.4mm
- Compatible with 1.75mm M6 thread V6 hotend, prusa i3 MK3 MK3S , PRUSA MINI , Prusa mini+ printer
- Non- stick, high performance, high temperature about 500degree, Excellent precision production,
- Pack: 1piece
- See more on Amazon...
Brand: POLISI3D | Manufacturer: POLISI3D
See On Amazon #16
HOCENWAY Upgrade Bimetal Nozzle 0.6mm High Flow High Temperature Plated Copper Hardened Steel Bimetallic Nozzle Compatible with AnkerMake M5 M5C 3D Printer (Nozzle 0.6)
Asin: B0CJ4LN3W4
Nickel Plating On The Nozzle Surface Greatly Reduces The Adhesion Of Filaments To The Nozzle, Resulting In Smoother Feeding. Smoother Inner Wall, No Clogging, With The Ra<0.4 Roughness, The Inner Wall Enhances The Fluidity Of The Filament And Brings Super Smooth Extrusion.
Package: 1 Piece Bimetal Nozzle 0.6.
Seamless Junction, No Filament Leakage. A Flat Surface And Intense Joints Effectively Solve The Leakage Problem. Only Compatible With M5 And M5c 3D Printer, Please Know Before Ordering..
Bimetallic Material With High Hardeness For High-Speed Printing. Nozzle Tip Is Made Of Hardened Steel, Mohs Hardeness 7.8, Long Service Life. The Body Is Made Of Copper Alloy, Its Thermal Conductivity Is As High As 330W/M.K,Ensuring That The Nozzle Has More Evenly Heating. The Volume Is Enlarged, Supporting A High-Speed Printing Of 600Mm/S Speed..
Features
- Bimetallic Material- Copper Alloy and Hardened Steel ,Smooth Inner Wall, Smooth Extrusion,Uniform Feeding. Copper alloy has high heat resistance up to 500 C, while hardened steel tip has up to 450 C, it can be used with most filaments for printing.
- Bimetallic material with high hardeness for high-speed printing. Nozzle tip is made of hardened steel, Mohs hardeness 7.8, long service life. The body is made of copper alloy, its thermal conductivity is as high as 330W/m.k,ensuring that the nozzle has more evenly heating. The volume is enlarged, supporting a high-speed printing of 600mm/s speed.
- Nickel plating on the nozzle surface greatly reduces the adhesion of filaments to the nozzle, resulting in smoother feeding. Smoother inner wall, no clogging, with the Ra<0.4 roughness, the inner wall enhances the fluidity of the filament and brings super smooth extrusion
- Seamless junction, no filament leakage. A flat surface and intense joints effectively solve the leakage problem. ONLY Compatible with M5 and M5C 3D printer, PLEASE KNOW BEFORE ORDERING.
- Package: 1 piece Bimetal nozzle 0.6
- See more on Amazon...
Brand: HOCENWAY | Manufacturer: HOCENWAY
Dimensions: 0.28 x 0.67 x 0.28 inches | Weight: 0.02 pounds
See On Amazon #17
MELIFE 4pcs All Metal Threaded Heatbreak Upgrade Titanium Alloy and Copper Bimetal Throat Nozzle for V6 Hotend 3D Printers
Asin: B0B6P4Y7FS | Ean: 0701715528413 | UPC: 701715528413
Titanium Alloy Is Used To Reduce Heat Conduction Upward From The Heating Block, And Gold-Plated Copper Is Used To Dissipate Heat To Accelerate Heat Conduction..
The Size Is 1.5Mm Longer Than The Original V6 Radiator, So It Can Be Directly Installed On The V6 Radiator To Make Your V6 Hot End Perfect..
The Straight Through Makes The Filaments Will Not Face Any Gaps After Extrusion.It Can Minimize The Possibility Of Clogging,Thus Helping To Print Flexible Filaments..
The Bimetal Titanium Heat Break Is Only Compatible With V6 Threaded Hotend.The Outer Hexagonal Design Is More Convenient For Disassembly..
Features
- It made of premium material and Copper in special process, much better than ordinary hotend throat.high temperature resistance up to 420 .
- The bimetal titanium heat break is only compatible with V6 threaded hotend.the outer hexagonal design is more convenient for disassembly.
- Titanium alloy is used to reduce heat conduction upward from the heating block, and gold-plated copper is used to dissipate heat to accelerate heat conduction.
- The straight through makes the filaments will not face any gaps after extrusion.It can minimize the possibility of clogging,thus helping to print flexible filaments.
- The size is 1.5mm longer than the original v6 radiator, so it can be directly installed on the v6 radiator to make your V6 hot end perfect.
- See more on Amazon...
Brand: MELIFE | Manufacturer: MELIFE
See On Amazon #18
Upgrade M6 Bimetal Nozzle 0.8mm Hardened Steel Plated Copper Compatible with V5 V6 Hotend Prusa I3 MK3S Anycubic Mega S Kobra 3D Printing PEI PEEK or Carbon Fiber (My 0.8)
Asin: B0CDXG8Y7R
This Nozzle Have An Advanced Nickel Based Plating, Considerably Reducing The Adhesion Of Plastic To The Nozzle. This Is Great For Filaments Keeping Things Clean And Shiny. Non- Stick, High Performance, Excellent Precision Production,Make Sure The Nozzle Is Smooth Without Burrs. Guarantee The Filament Running More Smoother.
Compatible With 1.75Mm Anycubic Mega S Chiron Kobra V5 V6 Hotend, Voron Series, Prusa I3 Mk3s 3D Printer And Other 3D Printer Which Is Using V5 Or V6 Hotend.
Package: 1Piece Bimetal Nozzle..
One Nozzle Can Print Most Materials From Conventional Printing With Pla To Peek, Even To Carbon Fiber Reinforced Materials, Hardened Steel Nozzle Can Easily Handle With Longer Time Printing.
Insert Tips Is Hardened Steel,High Wear-Resistance.Body Is Copper Alloy.Copper Has More Than 3X The Thermal Conductivity Of Brass.The Higher Thermal Conductivity.It Is Perfect For The High-Temperature Printing That Other Nozzles Can't Handle.
Features
- As the plated copper nozzle is not good wear-resistance but it has very good thermal conductivity, so now we develop this bimetal nozzle to have both high wear-resistant and good thermal conductivity.
- Insert tips is Hardened steel,high wear-resistance.Body is Copper Alloy.Copper has more than 3x the thermal conductivity of brass.The higher thermal conductivity.It is perfect for the high-temperature printing that other nozzles can't handle
- This nozzle have an advanced nickel based plating, considerably reducing the adhesion of plastic to the nozzle. This is great for filaments keeping things clean and shiny. Non- stick, high performance, Excellent precision production,make sure the nozzle is smooth without burrs. Guarantee the filament running more smoother
- One Nozzle can print most Materials From conventional printing with PLA to PEEK, even to Carbon Fiber reinforced materials, hardened steel Nozzle can easily handle with longer time printing
- Compatible with 1.75mm Anycubic Mega S Chiron Kobra V5 V6 Hotend, Voron series, Prusa I3 MK3S 3D printer and other 3D printer which is using V5 or V6 hotend
- Package: 1piece Bimetal Nozzle.
- See more on Amazon...
Brand: POLISI3D | Manufacturer: POLISI3D
Weight: 0.01 pounds
See On Amazon #19
5pcs Nozzle Throat, Stainless Steel M6 x 30mm 1.75mm Tube Accessary for 3D Printer Extruder
Asin: B07D7WR7K6 | Ean: 0741870617300 | UPC: 741870617300
There Is A Ptfe(Polytetrafluoroethylene) Sleeve Tube Inside Which Ensures Fluent Passing Through Of Filament.
Great Parts To Built A 3D Printer Or Used As A Replacement For Old Or Broken Part.
Widely Used And Fit For Any 3D Printer Extruder That Uses 1.75Mm Filament.
Comes Total 5 Pieces In One Pack And You Can Use Them For Quite A Long Time.
Features
- M6 screw part is made of high quality stainless steel, and long service life
- Comes total 5 pieces in one pack and you can use them for quite a long time
- There is a PTFE(Polytetrafluoroethylene) sleeve tube inside which ensures fluent passing through of filament
- Widely used and fit for any 3D printer extruder that uses 1.75mm filament
- Great parts to built a 3D printer or used as a replacement for old or broken part
- See more on Amazon...
Brand: Hilitand | Manufacturer: Hilitand
Dimensions: 0.39 x 2.36 x 1.18 inches | Weight: 0.02 pounds
See On Amazon #20
5pcs Nozzle Throat Stainless Throat 40mm Heatbreak Steel M6 Screw PTFE Tube Inside 3 Dimensional Printer Replacement Part for 3 Dimensional Printer MK8 Extruder(M6*40mm)
Asin: B0B5LT28C6
Comes Total 5 Pieces In One Pack And You May Use Them For Quite A Long Time.
Great Parts To Built A 3D Printer Or Used As A Replacement For Old Or Broken Part.
Widely Used And Fit For Any 3D Printer Extruder That Uses 1.75Mm Filament.
There Is A Ptfe Tube Inside Which Ensures Fluent Passing Through Of Filament.
Features
- M6 screw part is made of high quality stainless steel, and long service life
- There is a PTFE tube inside which ensures fluent passing through of filament
- Comes total 5 pieces in one pack and you may use them for quite a long time
- Widely used and fit for any 3D printer extruder that uses 1.75mm filament
- Great parts to built a 3D printer or used as a replacement for old or broken part
- See more on Amazon...
Brand: Eujgoov | Manufacturer: Eujgoov
Dimensions: 0.39 x 2.76 x 1.97 inches
See On Amazon
Looking For Something Else?
Search