WENBIXIA 3PCS Nema 23 Stepper Motor 1.26Nm(178.4oz.in) 56mm 2.8A 4-Lead Nema23 Step Motor 6.35mm Shaft for CNC 3D Printer
Asin: B0D25NG9NF | Model: WENBIXIA | PartNumber: WENBIXIA | Ean: 7421899845085
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.3.Low Noise,This Greatly Reduces The Vibration And Noise When The Motor Is Working, Provides You With A Relatively Quiet Environment..
5.This Stepper Motors Can Be Used In Various Area, Such As 3D Printer; Automation Equipment Etc..
4.Perfectly Fits With The High-Strength Synchronous Wheel And Synchronous Gear, It Realizes Accurate Constant Ratio, Uniform Revolution, And High Transmission Efficiency, While Avoiding System Errors And Obtaining Accurate Results..
2.The Motor With Low Power, Uniform Speed, Stable Performance, , And No Step To Lose During The Operation, Which Ensures The Extrusion Mechanism Stable Operation..
Features
- 1.The Stepper Motor with efficient heat dissipation has large torque and high precision without losing steps,This means that you can save on the cost of replacing or repairing the engine.
- 2.The motor with low power, uniform speed, stable performance, , and no step to lose during the operation, which ensures the extrusion mechanism stable operation.
- 3.Low Noise,this greatly reduces the vibration and noise when the motor is working, provides you with a relatively quiet environment.
- 4.Perfectly fits with the high-strength synchronous wheel and synchronous gear, it realizes accurate constant ratio, uniform revolution, and high transmission efficiency, while avoiding system errors and obtaining accurate results.
- 5.This stepper motors can be used in various area, such as 3D printer; automation equipment etc.
- See more on Amazon...
Brand: WENBIXIA | Manufacturer: WENBIXIA
Weight: 0.44 pounds
See On Amazon Similar To WENBIXIA 3PCS Nema 23 Stepper
#1
STEPPERONLINE Short Body Nema 17 Bipolar Stepper Motor 1A 22.6oz.in/16Ncm DIY CNC Extruder
Asin: B00PNEQ79Q | Model: 17HS08-1004S | PartNumber: 17HS08-1004S | Ean: 5269692731844, 4139052218043, 7038557197372, 0701056346851 | UPC: 701056346851
Nema 17 Bipolar 1.65X1.65X0.79 4-Wire.
Rated Current 1.0A & Resistance 3.5Ohms.
1.8 Deg. Step Angle(200 Steps/Rev).
16Ncm(22.6Oz.In) Holding Torque.
Features
- Small Size, Short Height
- 16Ncm(22.6oz.in) holding torque
- NEMA 17 bipolar 1.65x1.65x0.79 4-wire
- 1.8 deg. step angle(200 steps/rev)
- Rated current 1.0A & resistance 3.5ohms
- See more on Amazon...
Brand: STEPPERONLINE | Manufacturer: OSM Technology Co.,Ltd.
Dimensions: 0.79 x 1.65 x 1.65 Inches
See On Amazon #2
STEPPERONLINE Nema 17 Stepper Motor Bipolar 1.5A 42Ncm 42x42x38mm 1.8deg 4 Wires with 1m Cable and Connector (3 Pack)
Asin: B0B38GHRH8 | Model: 17HE15-1504S | PartNumber: 17HE15-1504S
Step Angle 1.8Deg, 200 Step/Revolution.
Low Noise High Speed 3D Printer Stepper Motor, Build With 1M Cable And Connector.
Rated Current/Phase 1.5A & Phase Resistance 2.3Ohms.
Bipolar Stepper Motor ,Dimension 42*42*38Mm, 2 Phase, 4 Leads.
Features
- 3 pack, Nema 17 Stepper Motor with 42Ncm holding troque
- Bipolar stepper motor ,dimension 42*42*38mm, 2 phase, 4 leads
- Step angle 1.8deg, 200 step/revolution
- Rated Current/phase 1.5A & Phase Resistance 2.3ohms
- Low noise high speed 3d printer stepper motor, build with 1m Cable and Connector
- See more on Amazon...
Brand: STEPPERONLINE | Manufacturer: STEPPERONLINE
Dimensions: 1.49 x 1.60 x 1.60 Inches | Weight: 0.62 pounds
See On Amazon #3
STEPPERONLINE High Torque Nema 23 CNC Stepper Motor 114mm 425oz.in/3Nm CNC Mill Lathe Router
Asin: B00PNEPW4C | Model: 23HS45-4204S | PartNumber: 23HS45-4204S | Ean: 0715624558850, 0701056340255 | UPC: 701056340255, 715624558850
Nema 23 Bipolar 2.24"X2.24"X4.45" 4-Wire.
Rated Current 4.2A & Resistance 0.9Ohms.
1.8 Deg. Step Angle(200 Steps/Rev).
3Nm(425Oz.In) Holding Torque.
Features
- Very Huge Torque
- 3Nm(425oz.in) holding torque
- NEMA 23 bipolar 2.24x2.24x4.45 4-wire
- 1.8 deg. step angle(200 steps/rev)
- Rated current 4.2A & resistance 0.9ohms
- See more on Amazon...
Brand: STEPPERONLINE | Manufacturer: STEPPERONLINE
Dimensions: 2.24 x 2.24 x 4.45 inches | Weight: 3.69 pounds
See On Amazon #4
STEPPERONLINE Nema 23 Stepper Motor 2.4Nm(339.79oz.in) 4.0A 8mm Shaft 57x57x82mm 4 Wires
Asin: B091C37FJ2 | Model: 23HS32-4004S | PartNumber: 23HS32-4004S | Ean: 0750226819848 | UPC: 750226819848
Nema 23 Motor Driving Voltage Is 24-48Vdc, Suggest 36 Vdc.
1.8 Deg. Step Angle(200 Steps/Rev).
*Rated Current/Phase: 4.0A, Phase Resistance: 0.65Ohms.
2.4Nm(339.79Oz.In) Holding Torque.
Features
- Nema 23 stepper motor with 8mm shaft
- 2.4Nm(339.79oz.in) Holding Torque
- Nema 23 motor driving voltage is 24-48VDC, suggest 36 VDC
- *Rated Current/phase: 4.0A, Phase Resistance: 0.65ohms
- 1.8 deg. step angle(200 steps/rev)
- See more on Amazon...
Brand: STEPPERONLINE | Manufacturer: STEPPERONLINE
Weight: 2.65 pounds
See On Amazon #5
STEPPERONLINE Nema 17 Pancake Stepper Motor 1A 17Ncm Bipolar 1.8 Degree 4-Lead 23mm Body Length for 3D Printer CNC Extruder
Asin: B0B93PNYCP | Model: 17HE08-1004S | PartNumber: 17HE08-1004S
Step Angle 1.8Deg, 200 Step/Revolution.
Small Size High Troque 3D Printer Stepper Motor, Build With 1M Cable And Connector.
Rated Current/Phase 1A & Phase Resistance 3.6Ohms.
Bipolar Stepper Motor ,Dimension 42*42*23Mm, 2 Phase, 4 Leads.
Features
- Nema 17 Pancake Stepper Motor with 17Ncm holding troque
- Bipolar stepper motor ,dimension 42*42*23mm, 2 phase, 4 leads
- Step angle 1.8deg, 200 step/revolution
- Rated Current/phase 1A & Phase Resistance 3.6ohms
- Small size high troque 3d printer stepper motor, build with 1m Cable and Connector
- See more on Amazon...
Brand: STEPPERONLINE | Manufacturer: STEPPERONLINE
Dimensions: 0.90 x 1.60 x 1.60 inches | Weight: 0.40 pounds
See On Amazon #6
Nema 23 Stepper Motor 4.2A 3.0Nm (425oz.in) 100mm Length with 8mm Shaft for CNC Mill Lathe Router
Asin: B081VD4C28 | Ean: 0720066769252 | UPC: 720066769252
The Most Powerful Nema 23 Stepper Motor Available. Ideal For Cnc Mill Lathe Router..
8Mm Motor Shaft..
Recommend Using Stepper Motor Driver With Voltage Of 24-50Vdc And At Least 4.2A Current..
3.0Nm (425Oz.In) Torque..
Features
- Nema 23 100mm length stepper motor.
- 3.0Nm (425oz.in) torque.
- The most powerful Nema 23 stepper motor available. Ideal for CNC Mill Lathe Router.
- Recommend using stepper motor driver with voltage of 24-50VDC and at least 4.2A current.
- 8mm motor shaft.
- See more on Amazon...
Brand: HobbyUnlimited | Manufacturer: HobbyUnlimited
Dimensions: 2.24 x 4.44 x 4.44 Inches
See On Amazon #7
Nema 23 Stepper Motor 2.8A 1.9Nm (269oz.in) 76mm Length with 8mm Shaft for CNC Mill Lathe Route
Asin: B07Y81FF3V
8Mm Shaft..
Weight: 1.1Kg (2.4 Lb)..
Recommend Using Stepper Motor Driver With Voltage Of 24-50Vdc And At Least 3.5A Current..
2.8A 1.9Nm (269Oz.In) Torque..
Features
- Nema 23 stepper motor 76mm length.
- 2.8A 1.9Nm (269oz.in) torque.
- 8mm shaft.
- Recommend using stepper motor driver with voltage of 24-50VDC and at least 3.5A current.
- Weight: 1.1kg (2.4 lb).
- See more on Amazon...
Brand: HobbyUnlimited | Manufacturer: HobbyUnlimited
Dimensions: 3.00 x 2.50 x 2.50 Inches
See On Amazon #8
4pcs Nema 23 Stepper Motor Steel Mounting Bracket with Mounting Screws
Asin: B073V77VLD | Model: Nema17-Mount | PartNumber: Nema17-Mount | Ean: 0720066773945 | UPC: 720066773945
Fits 57Mm Nema23 Stepper Motors..
Durable Steel Construction..
Mounting Screws Included..
Features
- 4pcs of NEMA 23 stepper motor mounting brackets.
- Mounting screws included.
- Fits 57mm NEMA23 stepper motors.
- Durable steel construction.
- See more on Amazon...
Brand: HobbyUnlimited | Manufacturer: HobbyUnlimited
Weight: 1.46 pounds
See On Amazon #9
STEPPERONLINE Nema 23 CNC Stepper Motor 2.8A 178.4oz.in/1.26Nm CNC Stepping Motor DIY CNC Mill
Asin: B00PNEPF5I | Model: 23HS22-2804S | PartNumber: 23HS22-2804S | Ean: 7241870685987, 7535001558364, 5915903798853, 0190657723350, 0714485662461, 0701056353927 | UPC: 701056353927, 714485662461, 190657723350
Nema 23 Bipolar 2.24"X2.24"X2.2" 4-Wire.
Rated Current 2.8A & Resistance 0.9Ohms.
1.8 Deg. Step Angle(200 Steps/Rev).
1.26Nm(178.4Oz.In) Holding Torque.
Features
- Higher Torque
- 1.26Nm(178.4oz.in) holding torque
- NEMA 23 bipolar 2.24x2.24x2.2 4-wire
- 1.8 deg. step angle(200 steps/rev)
- Rated current 2.8A & resistance 0.9ohms
- See more on Amazon...
Brand: STEPPERONLINE | Manufacturer: OSM Technology Co.,Ltd.
Dimensions: 2.20 x 2.24 x 2.24 Inches | Weight: 1.50 pounds
See On Amazon #10
Twotrees Nema17 Stepper Motor 17HS 4023 Stepper Motor Bipolar 42 Motor 4-Lead Wire with 1m Cable 23mm 42BYGH 1.5A Motor for CNC XYZ 3D Printer
Asin: B07TGJSNJB | Model: Twotrees-16570 | PartNumber: Twotrees-16570
Wide Application: This Small Stepper Motors Can Be Used In Various Area, Such As 3D Printer; Stage Lighting; Laser Engraving; Textile Machinery; Medical Equipment; Placement Machine; Non-Standard Equipment; Automation Equipment Etc..
What Do You Get: The Package Includes 1* 23Mm Stepper Motor/1Pcs 1M 4Pins Cable And Connector (Size: 42Mm X 42Mm X 23Mm/1.65''X1.65''X0.9'' ,Nema 17 Bipolar 4-Wire:Black: A+, Green: A-, Red: B+, Blue: B-.
Excellent Service: Ce Certified:Each Nema 17 Stepper Motor Has Undergone A Rigorous Quality Control Ex Works, Can Carry Out A 24-Month Quality Assurance . If Need Further Please Feel Free Contact Us, We Very Happy To Assist You..
Low Resistance: Twotrees Stepper Motor Can Get A Lower Resistance Value Compared To Motors Of The Same Thickness And Torque. This Considerably Increases The Thermal Conductivity Of The Motor. This Effectively Reduces The Increase In Temperature..
Features
- High Torque: Adopting high quality motor steel material,with high torque 13Ncm(18.4oz.in), low self-inductance reactance, responsive and can avoid system error.
- Low Resistance: Twotrees stepper motor can get a lower resistance value compared to motors of the same thickness and torque. This considerably increases the thermal conductivity of the motor. This effectively reduces the increase in temperature.
- Wide Application: This small stepper motors can be used in various area, such as 3D printer; stage lighting; laser engraving; textile machinery; medical equipment; placement machine; non-standard equipment; automation equipment etc.
- Excellent Service: CE certified Each nema 17 stepper motor has undergone a rigorous quality control ex works, can carry out a 24-month quality assurance . If need further please feel free contact us, we very happy to assist you.
- What Do You Get: The package includes 1* 23mm Stepper Motor/1pcs 1m 4pins cable and connector (Size: 42mm X 42mm X 23mm/1.65''x1.65''x0.9'' ,NEMA 17 bipolar 4-wire:Black: A+, Green: A-, Red: B+, Blue: B-
- See more on Amazon...
Brand: Twotrees | Manufacturer: Twotrees
Dimensions: 0.91 x 0.00 x 0.00 inches | Weight: 0.35 pounds
See On Amazon
Looking For Something Else?
Search