Frontpage > Product > Activated Carbon Filter Solder Absorber Esd Fume Extractor Filter Sponge Easy To Install

Activated Carbon Filter Solder Absorber ESD Fume Extractor Filter Sponge Easy to Install

Asin: B0D2HFRBXK   |   Ean: 7621630651115


As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.

Innovative Design..
Satisfaction , Please Contact If You Have Any Questions.Thank You!.
Please Allow 1-3Mm Error Due To Manual Measurement.Pls Make Sure You Do Not Mind Before You Bid..
Material, Easy To Use..

Features

  • Good wear resistance, long life.
  • material, easy to use.
  • Innovative design.
  • Please allow 1-3mm error due to manual measurement.pls make sure you do not mind before you bid.
  • Satisfaction , please contact if you have any questions.Thank You!
  • See more on Amazon...

Brand: HIOPOIUYT   |   Manufacturer: HIOPOIUYT

Amazon Price: $2.23 | as of 05/20/2024 (7:14pm pst) *DETAILS
Availability: In Stock

See On Amazon




Similar To Activated Carbon Filter Solder Absorber

  #1

Lesnow solder wick braid 10ft Length Desoldering Wick Braid Remover Tool Solder Sucker 1 piece No-Clean soldering Wick Wire Roll and Disassemble Electrical Components

Asin: B094GZ6CPZ   |   Model: Lesnow-FT-01   |   PartNumber: Lesnow-FT-01   |   Ean: 0606727905286   |   UPC: 606727905286

🌟This Desoldering Wick Has Geometrically-Precise Weave With Copper, Work From The Tip Of The Desoldering Wick, Once The Desoldering Wick And The Solder Has Been Heated, The Solder Braid Can Quickly Absorbed Molten Solder And Left A Clean Working Area..
🌟The Braided Solder Wicks Are Suitable For Labs, Home And Industry Welding Work, Practical Tools To Remove Solder And Correct Errors On Small Pcb Boards, Bringing Lots Of Convenience For Your Work.
🌟The Desoldering Wicks Are Made Of Copper Wires With Nice Quality, Precise Weaving Design Can Improve The Capillary Effect And The Redundant Solder Absorbing Ability, Increasing Your Efficiency.
🌟1 Pieces Of No-Clean Solder Wicks, Each Wick Is About 10Ft Long And 0.1 Inch In Width, Enough Quantity And Length For Your Daily Needs.

Features

  • The solder wicks can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more
  • 1 pieces of no-clean solder wicks, each wick is about 10ft long and 0.1 inch in width, enough quantity and length for your daily needs
  • This desoldering wick has geometrically-precise weave with copper, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
  • The desoldering wicks are made of copper wires with nice quality, precise weaving design can improve the capillary effect and the redundant solder absorbing ability, increasing your efficiency
  • The braided solder wicks are suitable for labs, home and industry welding work, practical tools to remove solder and correct errors on small PCB boards, bringing lots of convenience for your work
  • See more on Amazon...

Brand: Lesnow   |   Manufacturer: Lesnow-FT

Dimensions: 0.50 x 5.00 x 4.00 inches   |   Weight: 0.50 ounces

Amazon Price: $7.99 | as of 05/20/2024 (7:14pm pst) *DETAILS
List Price: $9.99

See On Amazon




  #2

MAIYUM 63-37 Tin Lead Rosin Core Solder Wire for Electrical Soldering (0.8mm 50g)

Asin: B075WB98FJ   |   Model: JF850   |   PartNumber: JF850   |   Ean: 0765470166723   |   UPC: 765470166723

√ Flux Content 1.8%,Electrical Soldering Wire Dia Is 0.8Mm (0.0315Inch),Gross Weight 50Gram (0.11Lbs),Good Size For Pocket.
√ Applications: Very Good Soldering Capability, Esp For Circuit Board, Diy, Home Improvement, Repairation Of Cable/Tv/Radio/Sterro/ Toys And Other Electrical Devices Etc. (Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Brith Defects Or Other Reproductive Harm. For More Information Go To The Offical Proposition 65 Warnings Website).
√ Low Melting Point: 361F/183C. Easy To Be Soldered, Flows Smoothly, Soldering Fast And Strong Soldering Point..
√ Parameters: Solder Wire Tin 63.

Features

  • Tin Lead Solder Wire: High Quality Rosin Core Solder Wire
  • Parameters: solder wire Tin 63
  • Flux content 1.8% electrical soldering wire dia is 0.8mm (0.0315inch) gross weight 50gram (0.11lbs),good size for pocket
  • Low Melting Point: 361F/183C. easy to be soldered, flows smoothly, soldering fast and strong soldering point.
  • Applications: Very good soldering capability, esp for circuit board, DIY, home improvement, Repairation of cable/TV/Radio/sterro/ Toys and other electrical devices etc. (WARNING: This product can expose you to lead, which is known to the State of California to cause brith defects or other reproductive harm. For more information go to the offical Proposition 65 Warnings Website)
  • See more on Amazon...

Brand: MAIYUM   |   Manufacturer: Shenzhen Joycefook Technology Co., Ltd

Dimensions: 2.17 x 2.17 x 1.18 inches   |   Weight: 0.12 pounds

Amazon Price: $8.99 | as of 05/20/2024 (7:14pm pst) *DETAILS

See On Amazon




  #3

Canfield 60/40 solder for stained glass

Asin: B004P4H9CE   |   Model: WBCANFIELD6040   |   PartNumber: WBCANFIELD6040   |   Ean: 0732454010655   |   UPC: 732454010655

Melting Temperature Of 360° - 376°F.
Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Birth Defects Or Other Reproductive Harm. For More Information Go To The Official Proposition 65 Warnings Website: Www.P65warnings.Ca.Gov.
Contains One Spool.
60/40 Is 60% Tin And 40% Lead.

Features

  • Made in the USA 1Lb Spool using only Virgin Material
  • 60/40 is 60% Tin and 40% Lead
  • Melting Temperature of 360 - 376 F
  • Contains One Spool
  • WARNING: This product can expose you to lead, which is known to the state of California to cause birth defects or other reproductive harm. For more information go to the official Proposition 65 Warnings Website: www.P65Warnings.ca.gov
  • See more on Amazon...

Brand: Canfield   |   Manufacturer: Canfield

Dimensions: 6.00 x 5.00 x 11.00 inches   |   Weight: 1.00 pounds

Amazon Price: $26.99 | as of 05/20/2024 (7:14pm pst) *DETAILS
List Price: $31.99

See On Amazon




  #4

TOWOT Solder Wick Braid With Flux No-Clean Electronic, Desoldering Wick Braid Remover.Desolder Soldering 2mm W 0.08'' L 9.8'

Asin: B093ZYF99G

Extensive Applications: The Braided Solder Wicks Are Suitable For Labs, School, Home, And Industrial Welding Work; And The Wicks Adopt A Fine Braid Design To Promote Strong Capillary Action, Bringing More Convenience To Your Daily Work..
Warranty :If You Have Any Questions, Please Feel Free To Contact Us At Any Time. Thank You!.
Low Residue Design: No-Clean Solder Wick Braid Will Just Leave Little Residues After Use And The Residues Are Non-Conductive And Non-Corrosive, No Need To Waste Your Time Cleaning It..
Easy To Use: The Desoldering Wicks Can Provide An Easier Way To Correct Mistakes On Small Pcb Boards And Will Not Make Damage To The Board, Clean Small Components, Suitable For Re-Soldering And Desoldering..

Features

  • Quality materials The Braided Desoldering Wicks are made of 100% copper wires with a fine braid design. Using flat stitch weaving, fast heat conduction, to promote strong capillary action to pull in excess solder.
  • Easy to use: the desoldering wicks can provide an easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering.
  • Extensive applications: the braided solder wicks are suitable for labs, school, home, and industrial welding work; And the wicks adopt a fine braid design to promote strong capillary action, bringing more convenience to your daily work.
  • Low residue design: No-Clean solder wick braid will just leave little residues after use and the residues are non-conductive and non-corrosive, no need to waste your time cleaning it.
  • Warranty If you have any questions, please feel free to contact us at any time. Thank you!
  • See more on Amazon...

Brand: TOWOT   |   Manufacturer: TOWOT

Dimensions: 0.39 x 118.11 x 0.08 inches   |   Weight: 0.01 pounds

Amazon Price: $4.99 | as of 05/20/2024 (7:14pm pst) *DETAILS
List Price: $5.99

See On Amazon




  #5

Solder Wire Lead Free Rosin Core Flux 0.8mm Electric Solder Fine Sn99 Ag0.3 Cu0.7 Flow 0.032in 0.11lb for Electronics Soldering Unlead 50g

Asin: B07Q167J98

Excellent Performance- High Electrical Conductivity, Good Performance For Electronics Soldering, Standard Spool Packing Easy To Use.
Widely Application- The 0.032In Diameter Solder Wire Is Ideal To Solder The Small Components Or Mcus, Excellent For Electronics Diy Or Repair For Drone, Tv, Laptop, Monitor, Smart Watch, Mobile Phone Etc.
Widely Application- The 0.032In Diameter Solder Wire Is Ideal To Solder The Small Components Or Mcus, Excellent For Electronics Diy Or Repair.
Low Melting Temperature- The Melting Point Temperature At 419F, Suitable For All Soldering Tools.

Features

  • LEAD FREE SOLDER- content Sn99 Ag0.3 Cu0.7 Pb Free lead free solder, with rosin core, easy flow, easy soldering, RoHS compliant good for environmental protection
  • LOW MELTING TEMPERATURE- The melting point temperature at 419F, suitable for all soldering tools
  • EXCELLENT PERFORMANCE- high electrical conductivity, good performance for electronics soldering, standard spool packing easy to use
  • WIDELY APPLICATION- the 0.032in diameter solder wire is ideal to solder the small components or MCUs, excellent for electronics DIY or repair
  • WIDELY APPLICATION- the 0.032in diameter solder wire is ideal to solder the small components or MCUs, excellent for electronics DIY or repair for Drone, TV, Laptop, Monitor, smart watch, Mobile Phone etc
  • See more on Amazon...

Brand: E ENERSYSTEC   |   Manufacturer: Enersystec Electric Co.,Ltd

Amazon Price: $7.99 | as of 05/20/2024 (7:14pm pst) *DETAILS

See On Amazon




  #6

KOTTO Solder Smoke Absorber Remover Fume Extractor Smoke Prevention Absorber DIY Working Fan for Soldering Station (Yellow)

Asin: B07VWDN29F   |   Model: Yellow   |   PartNumber: Yellow

Optimized 3000 Rpm High Suction Fan Is Low Noise And Allows You To Remove Fumes 5-6 Inches Away. 4 Non-Slip Heavy Duty Rubber Feet Anchors The Unit To The Ground. Handy Carrying Handle Allows You To Move The Unit Easily..
Us Based Customer Support, 30 Days Full Satisfaction No Question Asked Return Period..
Easy To Replace Filter, Includes One Smoke Trap Replacement Filter. Working Temperature: -20℃~60℃, Power Consumption: 120V, 30W (50 / 60Hz)..
0.4 Inch Thick Activated Carbon Filter Absorbs And Captures Fumes From Solder, Flux, Chemicals, Gases And Helps To Prevent Dissipation Into The Room..

Features

  • Solder Fume Extractor/Smoke Trap/Smoke Eater/Smoke Filter/Solder Sucker Prevention Absorber DIY Working Extractor Fan for Solder Station.
  • 0.4 inch thick activated carbon filter absorbs and captures fumes from solder, flux, chemicals, gases and helps to prevent dissipation into the room.
  • Optimized 3000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. 4 non-slip heavy duty rubber feet anchors the unit to the ground. Handy carrying handle allows you to move the unit easily.
  • Easy to replace filter, Includes one smoke trap replacement filter. Working temperature: -20 60 , Power consumption: 120V, 30W (50 / 60Hz).
  • US based customer support, 30 days full satisfaction no question asked return period.
  • See more on Amazon...

Brand: KOTTO   |   Manufacturer: Fstop Labs

Dimensions: 5.00 x 5.00 x 3.00 Inches

Amazon Price: $39.99 | as of 05/20/2024 (7:14pm pst) *DETAILS

See On Amazon




  #7

TOWOT Solder Wick Braid with Flux No-Clean Electronic, Desoldering Wick Braid Remover.Desolder Soldering 2.5mm W 0.10'' L 5'

Asin: B09XGY9M5H   |   Model: SW-2515   |   PartNumber: SW-2515

Extensive Applications: The Braided Solder Wicks Are Suitable For Labs, School, Home, And Industrial Welding Work; And The Wicks Adopt A Fine Braid Design To Promote Strong Capillary Action, Bringing More Convenience To Your Daily Work..
Warranty :If You Have Any Questions, Please Feel Free To Contact Us At Any Time. Thank You!.
Low Residue Design: No-Clean Solder Wick Braid Will Just Leave Little Residues After Use And The Residues Are Non-Conductive And Non-Corrosive, No Need To Waste Your Time Cleaning It..
Easy To Use: The Desoldering Wicks Can Provide An Easier Way To Correct Mistakes On Small Pcb Boards And Will Not Make Damage To The Board, Clean Small Components, Suitable For Re-Soldering And Desoldering..

Features

  • Quality materials The Braided Desoldering Wicks are made of 100% copper wires with a fine braid design. Using flat stitch weaving, fast heat conduction, to promote strong capillary action to pull in excess solder.
  • Easy to use: the desoldering wicks can provide an easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering.
  • Extensive applications: the braided solder wicks are suitable for labs, school, home, and industrial welding work; And the wicks adopt a fine braid design to promote strong capillary action, bringing more convenience to your daily work.
  • Low residue design: No-Clean solder wick braid will just leave little residues after use and the residues are non-conductive and non-corrosive, no need to waste your time cleaning it.
  • Warranty If you have any questions, please feel free to contact us at any time. Thank you!
  • See more on Amazon...

Brand: TOWOT   |   Manufacturer: TOWOT

Amazon Price: $3.99 | as of 05/20/2024 (7:14pm pst) *DETAILS

See On Amazon




  #8

TOWOT Tin Lead Rosin Core Solder Wire for Electrical Soldering, Content 1.8% Solder Flux Sn60-Pb40 (1.0mm, 50g)

Asin: B0943RVQ5W   |   Model: SW1050   |   PartNumber: SW1050

[Perfect Soldering Capability] -- This Wire Has A Low Melting Point, Flow Smoothly, Fast Soldering Speed And Strong Solder Joints..
[After-Sales Guarantee] -- In Order To Bring You A Better Shopping Experience, If You Have Any Questions, Please Feel Free To Contact Us. We Will Reply As Soon As Possible. Thank You!.
[Applications] -- The Features Of Solder Wire Can Help People Solder More Easier. Especially Suitable For Circuit Board, Tv, Radio And Other Home Appliances Repair, Diy, Home Decoration..
[Parameters Of Solder Wire] -- Diameter: 1.0Mm /Weight: 50 G.

Features

  • [Alloy Parameters] -- Solder wire Tin 60%- Lead 40% (Sn60-Pb40) Solder flux Content:1.8%
  • [Parameters of Solder Wire] -- Diameter: 1.0mm /Weight: 50 g
  • [Perfect soldering capability] -- This wire has a low melting point, flow smoothly, fast soldering speed and strong solder joints.
  • [Applications] -- The features of solder wire can help people solder more easier. Especially suitable for circuit board, TV, radio and other home appliances repair, DIY, home decoration.
  • [After-sales guarantee] -- In order to bring you a better shopping experience, if you have any questions, please feel free to contact us. We will reply as soon as possible. Thank you!
  • See more on Amazon...

Brand: TOWOT   |   Manufacturer: TOWOT

Weight: 0.11 Pounds

Amazon Price: $6.99 | as of 05/20/2024 (7:14pm pst) *DETAILS

See On Amazon




  #9

Weller WSW SnPb (T0051403099) Solder Wire, Dia: 1.0 mm / 0.039 in, Wt: 100 g / 3.527 oz, Alloy Sn60Pb40, Flux content 2.2%

Asin: B09LDG7J4L   |   Model: T0051403099   |   PartNumber: T0051403099   |   Ean: 0037103352132   |   UPC: 037103352132

Low Total Cost Of Ownership - Up To 70% Less Reduced Tip Consumption And Provide A Low Total Cost Of Ownership By Saving Labor Time & Ressources Due A Higher Productivity..
Flow + Heat Performance - Patented Alloys Guarantee Optimal Results..
Reduced Splash - Increase Direct User Safety As Well As Workplace Cleanliness..
Quality Solder Joints - Long-Term, Highly Durable Soldering Joints That Will Not Crack, Even On Difficult Surfaces..

Features

  • PERFORMANCE & PRODUCTIVITY - Optimized performance with a guaranteed and consistent 100% continuous flux core.
  • QUALITY SOLDER JOINTS - Long-term, highly durable soldering joints that will not crack, even on difficult surfaces.
  • LOW TOTAL COST OF OWNERSHIP - Up to 70% less reduced tip consumption and provide a low total cost of ownership by saving labor time & ressources due a higher productivity.
  • REDUCED SPLASH - Increase direct user safety as well as workplace cleanliness.
  • FLOW + HEAT PERFORMANCE - Patented alloys guarantee optimal results.
  • See more on Amazon...

Brand: Weller   |   Manufacturer: Apex Tool Group

Weight: 0.28 pounds

Warranty: No Warranty - Consumable

Amazon Price: $16.19 | as of 05/20/2024 (7:14pm pst) *DETAILS

See On Amazon




  #10

AUSTOR 6 Pack 60-40 Rosin Core Solder, Solder Wire Tin Lead Electrical Soldering Tools Diameter 0.8mm, 20g

Asin: B074CFBQS7   |   Ean: 0601263548508   |   UPC: 601263548508

Relative Parameters:60% Tin And 40% Lead Are Apply For Electronic Assembly Perfectly. 1.8% Flux Is Good For Soldering, Diameter 0.8Mm Is Good Joint And Avoid Components Overheating.
Wide Application: The Rosin Core Solder Wire Is Designed For Electrical Repairs, Such As Radios, Tvs, Vcrs, Stereos, Wires, Motors, Circuit Board And Other Electronics Devices.
Easy To Carry: You Can Take The Solder Wire Anywhere In Your Pocket. And The Plastic Tube Protect Solder From Dirt And Moisture(Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Birth Defects Or Other Reproductive Harm. For More Information Go To The Official Proposition 65 Warnings Website).
Easy To Use: Flows Well And Heats Evenly, The Melting Point Of Soldering Iron Wire Is 185°C - 190°C (365°F - 374°F).

Features

  • High quality: good solder ability in both electrical conductivity and thermal conductivity, working quickly, and suitable for various kinds of soldering iron
  • Easy to use: flows well and heats evenly, the melting point of soldering iron wire is 185 C - 190 C (365 F - 374 F)
  • Relative parameters:60% Tin and 40% Lead are apply for electronic assembly perfectly. 1.8% flux is good for soldering, diameter 0.8mm is good joint and avoid components overheating
  • Easy to carry: you can take the solder wire anywhere in your pocket. And the plastic tube protect solder from dirt and moisture(WARNING: This product can expose you to lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to the official Proposition 65 Warnings Website)
  • Wide application: the rosin core solder wire is designed for electrical repairs, such as radios, TVs, VCRs, stereos, wires, motors, circuit board and other electronics devices
  • See more on Amazon...

Brand: AUSTOR   |   Manufacturer: AUSTOR

Dimensions: 0.06 x 3.54 x 3.54 inches   |   Weight: 0.26 Pounds

Amazon Price: $9.99 ($1.66 / Count) | as of 05/20/2024 (7:14pm pst) *DETAILS

See On Amazon




  #11

63/37 Rosin Core Tin Lead Solder Wire For Electrical Soldering(0.3mm/50g)

Asin: B08M5XDKFG   |   Model: HTMSW63370350   |   PartNumber: HTMSW63370350   |   Ean: 0784121416253   |   UPC: 784121416253

Rosin Core Solder Wire Feature:Low Melting Point (361F/183°C),Very Good Soldering Capability,Smoother Welding Process,Soldering Fast,Strong Soldering Point And Easier To Use.
We Have A Professional Service Team, Ready To Provide The Best Service For Each Customer, Look Forward To The Start Of Cooperation, If You Have Any Questions, Please Feel Free To Contact Us.
Applications:Tin Lead Rosin Core Solder Wire For Electrical Devices,Esp For Radios/Televisions/Video Recorders/Stereo Systems/Wires/ Motors/Circuit Boards And Other Electronical Devices Etc.
Tin Lead Solder Wire Parameters:Solder Wire 63/37,Soldering Wire With Flux1.8%,Electrical Soldering Wire Dia 0.3Mm/0.0118'',Solder Wire G.W 50G/1.76Oz,Good Size For Pocket..

Features

  • Best Content Ratio:not that the higher the tin content, the better the solder wire,the best ratio is 63/37 for use
  • Tin Lead Solder Wire Parameters:solder wire 63/37,soldering wire with flux1.8%,electrical soldering wire dia 0.3mm/0.0118'',solder wire g.w 50g/1.76oz,good size for pocket.
  • Rosin Core Solder Wire Feature:low melting point (361F/183 C),very good soldering capability,smoother welding process,soldering fast,strong soldering point and easier to use
  • Applications:tin lead rosin core solder wire for electrical devices,esp for radios/televisions/video recorders/stereo systems/wires/ motors/circuit boards and other electronical devices etc
  • We have a professional service team, ready to provide the best service for each customer, look forward to the start of cooperation, if you have any questions, please feel free to contact us
  • See more on Amazon...

Brand: HengTianMei   |   Manufacturer: HengTianMei

Weight: 0.11 Pounds

Amazon Price: $8.99 | as of 05/20/2024 (7:14pm pst) *DETAILS
List Price: $12.00

See On Amazon




  #12

wyunway 60/40 solder for stained glass solder wire (450g(1LB))

Asin: B0BRB45JY1   |   Model: 604030   |   PartNumber: 604030   |   Ean: 0737096739339   |   UPC: 737096739339

The Solid Core Solder Wire Is A Good Stained Glass Supplies Solder,Great For The Stained Glass Hobbyist.
Warning: This Product Contains Lead, A Substance Known To The State Of California To Cause Cancer Or Birth De- Fects Or Other Reproductive Toxicity. For More Information, Go To Www.P65warnings.Ca.Gov.
60/40 Solder For Stained Glass And For Use On Copper Foil Seams 、 Lead Seams .This Is Flux Free Solder Suited For Work On Some Jewelry Items, Art Projects And Stained Glass. The Low Melting Point Made It Easy To Work ..
This Solder Is Flux Free - Made For Stained Glass Windows Or Other Applications So Easy To Work With, No Smoke, No Stink, Melts Into A Nice Puddle..

Features

  • wyunway Solid solder wire 60%tin,40%lead solder for stained glass Diameter: 3.0mm,
  • This solder is flux free - made for stained glass windows or other applications So easy to work with, no smoke, no stink, melts into a nice puddle.
  • The solid core solder wire is a good stained glass supplies solder,Great for the stained glass hobbyist
  • 60/40 Solder for stained glass and For Use on Copper Foil Seams Lead Seams .This is flux free solder suited for work on some jewelry items, art projects and stained glass. The low melting point made it easy to work .
  • WARNING: THIS PRODUCT CONTAINS LEAD, A SUBSTANCE KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER OR BIRTH DE- FECTS OR OTHER REPRODUCTIVE TOXICITY. FOR MORE INFORMATION, GO TO WWW.P65WARNINGS.CA.GOV
  • See more on Amazon...

Brand: wyunway   |   Manufacturer: wyunway

Amazon Price: $20.99 | as of 05/20/2024 (7:14pm pst) *DETAILS

See On Amazon




  #13

Kester 44 Solder Wire, 63/37 0.031-in, RMA Rosin, 1-ounce Tube

Asin: B00AVLM4SO   |   Model: 731-KES44-031-DP   |   PartNumber: 731-KES44-031-DP   |   Ean: 0610370936757   |   UPC: 610370936757

67/37 Tin/Lead Is Most Common For Electronics Work.
High Activity Ra Formulation.
.031" Diameter Is Common For Fine-Pitch Electronics Work.
1-Ounce Pocket Size Pack Contains Approx 27 Feet Of Solder!.

Features

  • Specially repackaged by TekLine Supply
  • 1-Ounce pocket size pack contains approx 27 feet of solder!
  • 67/37 Tin/Lead is most common for electronics work
  • .031 Diameter is common for fine-pitch electronics work
  • High activity RA formulation
  • See more on Amazon...

Brand: Kester   |   Manufacturer: Kester

Weight: 0.01 pounds

Amazon Price: $12.49 | as of 05/20/2024 (7:14pm pst) *DETAILS

See On Amazon




  #14

NTE Electronics SW02-10 No-Clean Solder Wick, 4 Blue, 098" Width, 10' Length

Asin: B0195UVWJ8   |   Model: SW02-10   |   PartNumber: SW02-10   |   Ean: 0768249099987   |   UPC: 768249099987

100% Copper Wick Has Fine Braid Design To Promote Strong Capillary Action To Pull In Excess Solder.
Available With Standard Or Anti-Static Bobbins.
Residue Left Behind Is Halide Free And Non-Conductive, So It Does Not Have To Be Cleaned Off The Board.

Features

  • Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes
  • Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board
  • 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder
  • Available with standard or anti-static bobbins
  • See more on Amazon...

Brand: NTE Electronics   |   Manufacturer: NTE Electronics, Inc.

Weight: 0.00 pounds

Amazon Price: $10.65 | as of 05/20/2024 (7:14pm pst) *DETAILS
List Price: $12.00

See On Amazon




  #15

HGMZZQ 60/40 Tin Lead Solder Wire with Rosin core for Electrical Soldering 0.031 inch(0.8mm-50g)

Asin: B0B6397413   |   Model: 6040-08-50   |   PartNumber: 6040-08-50   |   Ean: 0795063400224   |   UPC: 795063400224

3.Lower Melting Point: 361F/183C. Easy To Be Soldered, Flows Smoothly, Soldering Fast And Strong Soldering Point..
5.The Applicable Scope: Household Appliances, Stereos,Headset,Toys, Circuit Board Maintenance Etc..
4.Pretty Good Flow, Melts Evenly And Clean,Less Smoke,Solder Joints Reliable And Beautiful.
2.Sn/Pb: 60%/40%; Flux: 2.2%;Diameter 0.8 Mm/ 0.031 Inch.

Features

  • 1.Tin Lead Solder Wire: High Quality Rosin Core Solder Wire
  • 2.Sn/pb: 60%/40%; Flux: 2.2%;Diameter 0.8 mm/ 0.031 inch
  • 3.Lower Melting Point: 361F/183C. easy to be soldered, flows smoothly, soldering fast and strong soldering point.
  • 4.Pretty good flow, melts evenly and clean,less smoke,Solder joints reliable and beautiful
  • 5.The applicable scope: household appliances, stereos,headset,toys, circuit board maintenance etc.
  • See more on Amazon...

Brand: HGMZZQ   |   Manufacturer: HGMZZQ

Amazon Price: $7.99 | as of 05/20/2024 (7:14pm pst) *DETAILS
List Price: $13.99

See On Amazon




  #16

Solder Wire Rosin Core No Lead Electrical Solder Wire Thin 0.6mm 50g Fine Solder with Flux 2.5 PB Free Sn99 Ag0.3 Cu0.7 Flow 0.11lb Electronics Soldering DIY Repair Tiny Solder

Asin: B07XKHNN2Z

Wire Diameter Is Just 0.6Mm 0.024In, Ideal For Fine Soldering Work, Soldering The Tiny Part.
The Melting Point Temperature At 419F, Suitable For All Soldering Tools, Bright Soldering Pad.
Rohs Compliant Good For Electronics Soldering Task For Pcb, Wire, Smaller Ics, Tiny Resistor.
Alloy Materials Sn99 Ag0.3 Cu0.7, The Ag0.3 Is An Important Material Has Great Electricity Conductivity Which Is Great To Soldering The Amplifier Equipment And Others High End Product.

Features

  • Rosin core with flux, well flow during electronics soldering, easy for use, good solder joint
  • Alloy materials Sn99 Ag0.3 Cu0.7, the Ag0.3 is an important material has great electricity conductivity which is great to soldering the Amplifier equipment and others high end product
  • Wire diameter is just 0.6mm 0.024in, ideal for fine soldering work, soldering the tiny part
  • RoHS compliant good for electronics soldering task for PCB, wire, smaller ICs, Tiny resistor
  • The melting point temperature at 419F, suitable for all soldering tools, bright soldering pad
  • See more on Amazon...

Brand: E ENERSYSTEC   |   Manufacturer: Enersystec Electric Co.,Ltd

Amazon Price: $7.99 ($4.44 / Ounce) | as of 05/20/2024 (7:14pm pst) *DETAILS

See On Amazon




  #17

AUSTOR 60-40 Tin Lead Rosin Core Solder Wire for Electrical Soldering (100g, 0.8mm)

Asin: B073LHK99Z   |   Ean: 0601263547457   |   UPC: 601263547457

Melting Point Range: 185°C - 190°C (365°F - 374°F).
Easy To Use, Be Widely Applied In Electrical Repairs(Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Birth Defects Or Other Reproductive Harm. For More Information Go To The Official Proposition 65 Warnings Website).
Good Solder Ability Both In Electrical Conductivity And Thermal Conductivity.
Diameter: 0.8 Mm (0.032 In); Weight Of Solder Wire: 100G (0.22 Lb).

Features

  • Sn/ Pb: 60% / 40%; Flux: 2.0%; flows well and heats evenly
  • Diameter: 0.8 mm (0.032 in); weight of solder wire: 100g (0.22 lb)
  • Melting point range: 185 C - 190 C (365 F - 374 F)
  • Good solder ability both in electrical conductivity and thermal conductivity
  • Easy to use, be widely applied in electrical repairs WARNING: This product can expose you to lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to the official Proposition 65 Warnings Website
  • See more on Amazon...

Brand: AUSTOR   |   Manufacturer: AUSTOR

Dimensions: 2.17 x 2.17 x 1.18 inches

Amazon Price: $8.99 | as of 05/20/2024 (7:14pm pst) *DETAILS

See On Amazon




  #18

MG Chemicals 4890 60/40 Rosin Core, Leaded Solder Wire Pocket Pack, 0.81mm/0.032" Dia. 2 Pocket Packs

Asin: B071JHLT8Q   |   Model: 4890-18G-2   |   PartNumber: 4890-18G-2   |   Ean: 0779008489062   |   UPC: 779008489062

Meets J-Std-004C/ J-Std-006B.
Melting Point: 183 °C - 191 °C/ 361 °F - 376 °F.
Standard Flux Core Percentage At 2. 2%.
Non-Corrosive Non-Conductive Flux Residue.

Features

  • Rosin activated flux core (rag)
  • Non-corrosive non-conductive flux residue
  • Meets j-std-004c/ j-std-006b
  • Standard Flux Core percentage at 2. 2%
  • Melting point: 183 c - 191 c/ 361 f - 376 f
  • See more on Amazon...

First Available: 06/03/2017

Brand: MG Chemicals   |   Manufacturer: MG Chemicals

Weight: 0.04 Pounds

Warranty: warranty@mgchemicals.com

Amazon Price: $6.95 ($3.48 / Count) | as of 05/20/2024 (7:14pm pst) *DETAILS

See On Amazon




  #19

VIRALLOY No Clean Flux Solder Wick Braid Length 10ft Width 2.5mm Solder Copper Static Dissipative Bobbin Desoldering Wick Solder Remover Wick Desolder Electronic Components - Pack of 1

Asin: B0B1PFSFQT   |   Model: SW-2530   |   PartNumber: SW-2530   |   Ean: 0195893076680   |   UPC: 195893076680

The Ergonomic Design Of The Solder Flux Remover Desoldering Wick Ensures That It Will Leave Little To No Residue After Use, And The Residues That Are Left Behind Are Non-Conductive And Halide-Free.
The Solder Tape Will Absorb The Solder, Leaving Your Circuit Board Clean And Free Of Unwanted Solder. So Why Wait? Get The Viralloy No Clean Desolder Wick Today And Make Desoldering A Breeze!.
Plus, The Flux For Soldering Copper Soldering Wick Is Easy To Use - Simply Place It Over The Area Where You Want To Remove The Solder And Heat It Up.
Made From Pure Copper Wires Woven Together With A No-Clean Flux Formula, This Solder Braid Wick Is Designed To Absorb And Remove Solder From Your Circuit Boards Quickly And Easily.

Features

  • Are you looking for a flux wick and an effective and efficient way to remove solder from your circuit boards? Look no further than the VIRALLOY No Clean Solder Flux Desoldering Braid!
  • Made from pure copper wires woven together with a no-clean flux formula, this solder braid wick is designed to absorb and remove solder from your circuit boards quickly and easily
  • The ergonomic design of the solder flux remover desoldering wick ensures that it will leave little to no residue after use, and the residues that are left behind are non-conductive and halide-free
  • Plus, the flux for soldering copper soldering wick is easy to use - simply place it over the area where you want to remove the solder and heat it up
  • The solder tape will absorb the solder, leaving your circuit board clean and free of unwanted solder. So why wait? Get the VIRALLOY No Clean Desolder Wick today and make desoldering a breeze!
  • See more on Amazon...

Brand: VIRALLOY   |   Manufacturer: VIRALLOY

Dimensions: 0.39 x 2.12 x 2.12 inches

Amazon Price: $6.99 | as of 05/20/2024 (7:14pm pst) *DETAILS

See On Amazon




  #20

KOTTO Soldering Fume Smoke Absorber, Electric Iron Welding Fume Extractor Soldering Smoke Absorber Remover DIY Fume Extractor Filter with Strong Suction

Asin: B07ZHH5H7N   |   Model: FAN_SLD   |   PartNumber: FAN_SLD

Adjustable Optimized 6000 Rpm High Suction Fan Is Low Noise And Allows You To Remove Fumes 5-6 Inches Away. The Fan Speed Is Adjustable. Suction: 40W, 6000 Rpm, 52Cfm, Noise Level: 55Dbm, Life Expectancy: 50,000 Hours, Static Pressure: 125Mmh2o..
Us-Based Customer Support, 30 Days Full Satisfaction No Question Asked Return Period..
Easy To Replace The Filter, Includes One Replacement Filter. Working Temperature: -20℃~60℃, Power Consumption: 120V-240V, 40W ( 12V, 4A Power Supply)..
A 24-Inch Flexible Tube, Fume Hood Can Adjust Direction According To Actual Needs..

Features

  • Soldering Smoke Absorber, Electric Iron Welding Fume Extractor Soldering Smoke Absorber Remover DIY Fume Extractor Filter with Strong Suction.
  • A 24-inch flexible tube, Fume hood can adjust direction according to actual needs.
  • Adjustable optimized 6000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. The fan speed is adjustable. Suction: 40W, 6000 RPM, 52CFM, Noise Level: 55dbm, Life Expectancy: 50,000 hours, Static pressure: 125mmH2O.
  • Easy to replace the filter, Includes one replacement filter. Working temperature: -20 60 , Power consumption: 120V-240V, 40W ( 12V, 4A Power supply).
  • US-based customer support, 30 days full satisfaction no question asked return period.
  • See more on Amazon...

Brand: KOTTO   |   Manufacturer: KOTTO

Dimensions: 3.40 x 4.70 x 4.70 inches   |   Weight: 3.88 pounds

Amazon Price: $79.99 | as of 05/20/2024 (7:14pm pst) *DETAILS
Used Price: $75.09

See On Amazon





Looking For Something Else? Search

Home & Garden


Home Improvement


Industrial


Electronics


Office


Car & Automotive


Sporting Goods


Beauty Supplies


Health & Personal Care


Fashion


Toys and Hobby



Additional Categories


We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.
As an Amazon Associate we earn from qualifying purchases.