WZFC Carbide Milling Cutter 3.175 Shank Single Flute Spiral Router Bits CNC Milling Cutter 10pcs,3.175x2x10
Asin: B0D2K7QJDB
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.3. Single Flute Designed End Mill With Sharp Cutting Edge Would Offer A Smooth Cutting Surface And Chip Clearing..
5. Usuallythese End Mills Are Used For Cuttingacrylic, Pvc, Mdf, Density Board,Wood And Many Other Soft Materials..
4. There Are Total 10 Pieces End Mills In This Set That Would Be Great Replacement..
2. 2Mm And 1/8 Inch Standard Shank Diameter Would Fit For Many Milling Machines Or Cnc Cutting Machines..
Features
- 1. Thisset of end millsaremade from high qualitytungsten carbidefor good hardness and the cutting edge is quite sharp.
- 2. 2mm and 1/8 inch standard shank diameter would fit for many milling machines or CNC cutting machines.
- 3. Single flute designed end mill with sharp cutting edge would offer a smooth cutting surface and chip clearing.
- 4. There are total 10 pieces end mills in this set that would be great replacement.
- 5. Usuallythese end mills are used for cuttingacrylic, PVC, MDF, density board,wood and many other soft materials.
- See more on Amazon...
Brand: WZFC | Manufacturer: WZFC
Weight: 1.10 Pounds
See On Amazon Similar To WZFC Carbide Milling Cutter 3.175
#1
Genmitsu 40pcs End Mills CNC Router Bits, 1/8" Shank CNC Cutter Milling Carving Bit Set Including 2-Flute Flat Nose & Ball Nose, Nano Blue Coat & Titanium Coat, MC40A
Asin: B08CD99PWL | Model: MBS-001 | PartNumber: MBS-001 | Ean: 4897093844385
Two End Mill Sets -- Shank Diameter: 3.175Mm, Cutting Diameter: 0.8 - 3.0Mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.5/3.0Mm), Cutting Length: 17Mm, Overall Length: 38Mm, With Nano Blue And Titanium Coating..
Wide Compatibility: The Mc40a End Mills Are Compatible With Most Desktop Cnc Machines, Such As The Genmitsu 3018 Series, As Well As Other Industrial Cnc Machines. Just Make Sure You Select The Correct-Sized Collet For Your Device.
Applicable Materials: Widely Used In Various Materials Including Plastics, Aluminum, Circuit Board, Wood, As Well As Other Precision Parts Processing..
2-Flute Spiral Flat Nose & Ball Nose End Mills -- Shank Diameter: 3.175Mm, Cutting Diameter: 3.175Mm, Cutting Length: 17Mm, Overall Length: 38Mm..
Features
- High Quality: The Genmitsu end mills are made of ultra-fine 0.2 m tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating /Titanium Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
- 2-Flute Spiral Flat Nose & Ball Nose End Mills -- Shank Diameter: 3.175mm, Cutting Diameter: 3.175mm, Cutting Length: 17mm, Overall Length: 38mm.
- Two End Mill Sets -- Shank Diameter: 3.175mm, Cutting Diameter: 0.8 - 3.0mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.5/3.0mm), Cutting Length: 17mm, Overall Length: 38mm, with Nano blue and Titanium coating.
- Applicable Materials: Widely used in various materials including plastics, aluminum, circuit board, wood, as well as other precision parts processing.
- Wide Compatibility: The MC40A end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device
- See more on Amazon...
Brand: Genmitsu | Manufacturer: Genmitsu
Dimensions: 0.04 x 1.50 x 3.18 inches
See On Amazon #2
SPEED TIGER Micrograin Carbide Square End Mill - 4 Flute - ISE1/8"4T (5 Pieces, 1/8") - for Milling Alloy Steels, Hardened Steel, Metal & More Mill Bits Sets for DIYers & Professionals
Asin: B07FSJLMJ5 | Model: ISE1-8-4T | PartNumber: ISE1-8-4T | Ean: 4712805504695
✅ High-Performance Material - This End Mill Is Made From Micrograin Carbide, Which Gives It Exceptional Toughness, Durability, And Machinability. It Performs Brilliantly And Is An Excellent Value For Its Price..
✅ Dedicated Support - Please Don't Hesitate To Contact Us On Amazon If You Need The Cutting Condition Data. We Want To Ensure You Receive The Best Product That Meets Your Requirements..
✅ Fine Workmanship - Our Products Deliver Outstanding High Accuracy With An Error Of -0.02Mm, Empowering Users To Achieve Professional Cutting Quality Effortlessly..
✅ Altibn Coating - This Coating, Made Of Titanium Aluminum Boron Nitride (Altibn), Offers Exceptional Stability At High Temperatures And Surpasses The Heat Resistance Of Tialn, Tin, Or Ticn Coatings..
Features
- APPLICATION - Our carbide tools are highly effective at machining various types of steel such as Carbon Steels (~HB225), Alloy Steels (HB225~325), Pre-hardened Steels (up to HRC45), Hardened Steels (HRC40~54), and Cast Iron.
- AlTiBN COATING - This coating, made of titanium aluminum boron nitride (AlTiBN), offers exceptional stability at high temperatures and surpasses the heat resistance of TiAlN, TiN, or TiCN coatings.
- HIGH-PERFORMANCE MATERIAL - This end mill is made from micrograin carbide, which gives it exceptional toughness, durability, and machinability. It performs brilliantly and is an excellent value for its price.
- FINE WORKMANSHIP - Our products deliver outstanding high accuracy with an error of -0.02mm, empowering users to achieve professional cutting quality effortlessly.
- DEDICATED SUPPORT - Please don't hesitate to contact us on Amazon if you need the Cutting Condition Data. We want to ensure you receive the best product that meets your requirements.
- See more on Amazon...
Brand: SPEED TIGER | Manufacturer: SPEED TIGER
Weight: 0.03 Pounds
See On Amazon #3
CNC End Mill Set, Carbide Tungsten Steel 4 Fultes Milling Cutter, Router Bits Rotary Bits Tool Straight Shank 2-12mm 8pcs
Asin: B07TWTZRQZ | Ean: 8431271486521
Detail Design: Cutting Edge With Suitable Negative Forefoot Design, Taking Into Account The Strength And Sharpness Of The Cutting Edge. At The Same Time, The Large Core Diameter Is Used To Enhance The Rigidity Of The Tool And Make The Cutting And Chip Removal Stable..
Package Included：8 X 4 Flutes Carbide Metric End Mill Cutter Set.
Wide Application Cnc End Mill：It Can Be Used On Many Fields, Such As Metal Processing, Cnc Machining And Engineering Using. Large Chip Flute Design For Smoother Chip Removal, Making The Workpiece Smoother And Brighter..
Material: Tungsten Steel Carbide Has The Advantages Of Wear Resistance, Toughness And Corrosion Resistance. It Also Has Stronger Heat Resistance Than Hss, So It Can Maintain Hardness Tungsten Steel Is Mainly Composed Of Tungsten Carbide And Cobalt, Accounting For 99% Of All Components. Tungsten Steel Is Also Called Cemented Carbide And Is Considered To Be The Teeth Of Modern Industry..
Features
- 2-12mm 4Flutes 8PCS Carbide Metric End Mill Set: This end mill set includes 8 diameter sizes of 2mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, satisfy your different needs.
- Material: Tungsten steel Carbide has the advantages of wear resistance, toughness and corrosion resistance. It also has stronger heat resistance than HSS, so it can maintain hardness Tungsten steel is mainly composed of tungsten carbide and cobalt, accounting for 99% of all components. Tungsten steel is also called cemented carbide and is considered to be the teeth of modern industry.
- Detail design: cutting edge with suitable negative forefoot design, taking into account the strength and sharpness of the cutting edge. At the same time, the large core diameter is used to enhance the rigidity of the tool and make the cutting and chip removal stable.
- Wide Application CNC End Mill It can be used on many fields, such as metal processing, CNC machining and engineering using. Large chip flute design for smoother chip removal, making the workpiece smoother and brighter.
- Package Included 8 x 4 Flutes carbide metric End Mill Cutter set
- See more on Amazon...
Brand: Home of quality tools | Manufacturer: Home of quality tools
See On Amazon #4
End Mill Sets, 10 Pieces Titanium Coat Carbide CNC Router Burrs End Milling Engraving Bits Drilling Hole Tool for PCB Circuit Board Plastic Fiber Wood Copper 0.8~3.175mm 1/8" Shank
Asin: B085S734SJ | Model: DK-010 | PartNumber: DK-010
Titanium Coat Carbide Hard Steel: With Sufficient Flexural Strength And Wear Resistance, Ensuring High Work Efficiency..
Highly Precision: Sharp Cutting Edge, Milling, Hole And Plate Edge, Clean Surface, Neat, No Glitches..
High Quality Material: Using High Quality Grained Carbide Material, Providing Good Milling And Cutting Performance..
Wide Compatibility: Works With Pcb, Smt, Cnc, Mold, Plastic Fiber, Carbon Fiber, Hard Wood, Printed Circuit Board, And Other Precision Parts Processing..
Features
- Cutting edge diameter (CED): 0.8-3.175mm (10Pcs, 0.8mm, 1mm, 1.2mm, 1.5mm, 1.6mm, 1.8mm, 2mm, 2.4mm, 3mm, 3.175mm); Cutting edge length (CEL): 6mm; Total length: 38mm; Shank diameter (SHK): 3.175mm
- Wide Compatibility: Works with PCB, SMT, CNC, Mold, plastic fiber, carbon fiber, hard wood, printed circuit board, and other precision parts processing.
- Titanium Coat Carbide Hard Steel: With sufficient flexural strength and wear resistance, ensuring high work efficiency.
- High Quality Material: Using high quality grained carbide material, providing good milling and cutting performance.
- Highly precision: Sharp cutting edge, milling, hole and plate edge, clean surface, neat, no glitches.
- See more on Amazon...
Brand: DKIBBITH | Manufacturer: DKIBBITH
Weight: 0.08 Grams
See On Amazon #5
R8 FMB32 7/16-20 Shank Face End Mill Arbor and 4"/100mm Cutting Diameter 6-Flute 400R 100-32-6T CNC Face End Milling Shell Cutter with 10Pcs APMT1604 Carbide Inserts and T15 Wrench
Asin: B0CJCG4WK4
High Quality: Made Of Steel With High Hardness And High Strength To Ensure Long Service Life, Which Can Be Used On Cnc Machines, Suitable For Plate Cutting, Hardness Insert Used For Steel Material..
Widely Application: This Shank Face Mill Arbor Set Is Designed For Shoulder Milling, Face Milling And Slotting, Mainly Used For Cnc Machining Centers, Cnc Engraving Machines. It Can Also Be Installed On An Ordinary Milling Machine To Process Some Harder And Less Complex Heat-Treated Materials..
Good Performance: Milling Rotary Tool Is Screw Locking, The Chip Large Space, Good Chip Removal, Edge Can Fit A Variety Of Materials. Body Made Of Fine Quality Steel, Good Permeability,Sturdiness And Durability, Resistance To Multiple Impacts,Fine Durability. Smooth Surface, Comfortable Feeling, Nice Appearance..
Function: Machining Planes, Grooves, And Cutting Off Workpieces On Milling Machines. Milling Speed And Processing Efficiency Are High, And The Surface Quality Of The Processing Is Also Good. It Is Possible To Add T Parts With Hard Skin And Hardened Layers, Which Has Obvious Advantages In Improving Product Quality And Processing Efficiency..
Features
- Set includes: 1 x R8 FMB32 Arbor, 1 x 400R-100-32-6T Cutter, 1 x T15 Wrench, 10 x APMT1604 Carbide Inserts as pictured.
- Function: Machining planes, grooves, and cutting off workpieces on milling machines. Milling speed and processing efficiency are high, and the surface quality of the processing is also good. It is possible to add T parts with hard skin and hardened layers, which has obvious advantages in improving product quality and processing efficiency.
- High Quality: Made of steel with high hardness and high strength to ensure long service life, which can be used on CNC machines, suitable for plate cutting, hardness insert used for steel material.
- Good Performance: Milling rotary tool is screw locking, the chip large space, good chip removal, edge can fit a variety of materials. Body made of fine quality steel, good permeability,sturdiness and durability, resistance to multiple impacts,fine durability. Smooth surface, comfortable feeling, nice appearance.
- Widely Application: This shank face mill arbor set is designed for shoulder milling, face milling and slotting, mainly used for CNC machining centers, CNC engraving machines. It can also be installed on an ordinary milling machine to process some harder and less complex heat-treated materials.
- See more on Amazon...
Brand: BestParts | Manufacturer: BestParts
See On Amazon #6
HQMaster Router Bits Straight End Mill Milling Cutter Endmill 2 Flutes CNC Cutting Carbide Tungsten Steel Straight Slot Bit, Pack of 10 (3.175 x 17 x 38.5mm)
Asin: B078MJCZFK | Model: HQ-5072 | PartNumber: HQ-5072
Brand: HQMaster | Manufacturer: HQMaster
See On Amazon #7
40Pcs End Mills CNC Router Bits Set 1/8" Shank, Mcwdoit CNC Machine Cutting Milling Tool Engraving Cutter Including Flat Nose/Ball Nose End Mill, Nano Blue Coat/Titanium Coat 2 Flute CNC Router Bits
Asin: B07W5N72D4 | Model: HT001 | PartNumber: HT001 | Ean: 0725756324292 | UPC: 725756324292
【Advantage】Carbide Rods And Tungsten Steel Rods With High Hardness, High Wear Resistance, Clean Surface, Neat, No Glitches..
【Cnc Router Bits: Parameter】Overall Length（Oal）: 38Mm; Shank Diameter（Sd）: 3.175Mm.
【Wide Application】Pcb, Smt, Cnc, Mold, Plastic Fiber, Carbon Fiber, Hard Wood, Printed Circuit Board, Aluminum And Other Precision Parts Processing..
【Cost-Effective Kit】4 Type Each 10Pcs, Ball Nose Bit 2-Flute, Flat Nose End Mill 2-Flute, Nano Blue Coat And Titanium Coat Cnc Router Bits, Satisfying Your Different Needs..
Features
- High Quality CNC Bits Mcwdoit 1/8 end mills are made of ultra-fine grain carbide material (tungsten steel), with great cutting and milling performance.
- Cost-Effective Kit 4 Type Each 10Pcs, Ball Nose Bit 2-Flute, Flat Nose End Mill 2-Flute, Nano Blue Coat and Titanium Coat CNC Router Bits, satisfying your different needs.
- Advantage Carbide rods and tungsten steel rods with high hardness, high wear resistance, clean surface, neat, no glitches.
- Wide Application PCB, SMT, CNC, Mold, plastic fiber, carbon fiber, hard wood, printed circuit board, aluminum and other precision parts processing.
- CNC Router Bits: Parameter Overall Length OAL : 38mm; Shank Diameter SD : 3.175mm
- See more on Amazon...
Brand: mcwdoit | Manufacturer: WAM Direct
Dimensions: 4.21 x 5.35 x 1.30 inches | Weight: 0.38 pounds
See On Amazon #8
OSCARBIDE Nickel Plated Indexable End Mill R8 Shank,1-1/2''Cutting Diameter,6-1/8"Overall Length,AP16,4 Flutes with 4 Pieces APKT1604 Carbide Inserts
Asin: B0BBQJX46S | Model: 3 | PartNumber: 3 | Ean: 0766415074271 | UPC: 766415074271
Reduces Cutting Forces, Maximum Rigidity.
4 Flutes, Carbide Inserts Apkt160408 Installed.
Used For Slotting And Peripheral Milling.
R8 Indexable End Mills Positive Rake 90°, Right Hand Cut.
Features
- Carbide Indexable End mills, R8 shank ,1-1/2 Cutting Diameter',Overall Length: 6-1/8"
- R8 Indexable End mills Positive rake 90 , right hand cut
- Reduces cutting forces, Maximum rigidity
- Used for slotting and peripheral milling
- 4 Flutes, carbide inserts APKT160408 installed
- See more on Amazon...
Brand: OSCARBIDE | Manufacturer: OSCARBIDE TOOLS
See On Amazon #9
HQMaster CNC Router Bit 10 Pack 1/8 Shank Spiral Upcut Router Bit 1 Flute End Mill Set Milling Cutter 3.175mm Cutting Single Flute Tungsten Steel Engraving Tool for MDF Acrylic PVC Wood Density Board
Asin: B078S3S956 | Model: HQ-5073 | PartNumber: HQ-5073 | Ean: 0763684168991 | UPC: 763684168991
Perfect Cutting ---- The Design Of Single Flute, Larger Spiral Chip Space And Mirror Polishing Of Cnc Router Bit Makes Non-Stick Crumbs, Smooth Cutting And Fast Chip-Removal.
Package Contents ---- 10Pcs Tungsten Steel Bits Assorted In A Plastic Storage Case.
Dimensions ---- Diameter : 1/8" (3.175Mm); Cutting Diameter: 3.175Mm; Cutting Edge Length (Cel)/Flute Length: 25Mm; Overall Length (Oal): 50Mm.
High Efficiency ---- These Bits Own Sharp Edge Which Is Able For Fast Engraving That Makes High Efficiency; Durable, High Precision And Not Easy To Break; It Is Smokeless And Burr-Free While Processing.
Features
- Range of processing ---- Used for cutting/engraving/carving/drilling/sculpturing/milling in materials like MDF, acrylic, density board, solid wood, wood, plastics, PVC, PVC expansion sheet, PP, ABS, etc.
- High efficiency ---- these bits own sharp edge which is able for fast engraving that makes high efficiency; durable, high precision and not easy to break; it is smokeless and burr-free while processing
- Perfect cutting ---- the design of single flute, larger spiral chip space and mirror polishing of CNC Router Bit makes non-stick crumbs, smooth cutting and fast chip-removal
- Dimensions ---- diameter : 1/8 (3.175mm); cutting diameter: 3.175mm; cutting edge length (CEL)/flute length: 25mm; overall length (OAL): 50mm
- Package contents ---- 10pcs tungsten steel bits assorted in a plastic storage case
- See more on Amazon...
Brand: HQMaster | Manufacturer: HQMaster
Dimensions: 0.31 x 2.36 x 2.17 Inches
See On Amazon #10
Carbide Square End Mill - 4 Flute - 1/8"4T (5 Piece, 1/8") - for Milling Alloy Steels, Hardened Steel, Metal & More Mill Bits Sets for DIYers & Professionals
Asin: B0CJ4PLML5 | Ean: 0761330614038 | UPC: 761330614038
We Use The Highest Quality Tungsten Carbide Powders And Adjust The Ratio Of Tungsten Carbide And Cobalt To Meet The Ideal Hardness. It Is Stable And Has Excellent Wear-Resistance Of The Material. It Significantly Enhances The Tool's Lifespan And Keeps The End Mill Sharp. It Also Helps Keep The Surface Quality Of Your Work-Piece At The Best Level Possible..
Lu&Mn End Mill Bits Are Compatible With Most Desktop Cnc Machines, As Well As Other Industrial Cnc Machines. Just Make Sure You Select The Correct-Sized Collet For Your Device..
General Usage: Applicable With Copper, Copper Alloys, Cast Iron, Steels, Carbon Steels, Alloy Steels, Pre-Hardened Steels, Hardened Steels, And Stainless Steel Materials. Best Use For Materials Hrc Less Than 50..
Material- Solid Carbide With Tialn Coated. Type: 4 Flute With Squre End..
Features
- Size - 1/8 inch shank and 1/8 inch cutting diameter, 3/8 inch cutting Length, 1-1/2 inch for total length
- Material- Solid Carbide with TiAlN Coated. Type: 4 Flute with squre end.
- We use the highest quality tungsten carbide powders and adjust the ratio of tungsten carbide and cobalt to meet the ideal hardness. It is stable and has excellent wear-resistance of the material. It significantly enhances the tool's lifespan and keeps the end mill sharp. It also helps keep the surface quality of your work-piece at the best level possible.
- General Usage: Applicable with copper, copper alloys, cast iron, steels, carbon steels, alloy steels, pre-hardened steels, hardened steels, and stainless steel materials. Best use for materials HRC less than 50.
- LU&MN End mill bits are compatible with most desktop CNC machines, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
- See more on Amazon...
Brand: LU&MN | Manufacturer: LU&MN
Dimensions: 0.13 x 1.50 x 0.13 inches | Weight: 0.09 Pounds
See On Amazon #11
Yakamoz Spiral Router Bit, 10Pcs 1/8" Shank Carbide CNC End Mill Cutter 2 Flutes Flat End Milling Bits 12mm Cutting Length for PCB PVC Wood Acrylic Aluminum
Asin: B098DXTZGR | Model: SK0008 | PartNumber: SK0008
Perfect Cutting ---- Double Flute Spiral Design Improved The Chip Removal Efficiency, Surface Mirror Finish Prevent Chips From Sticking To Bits, Which Makes Cutting More Smooth..
Great Material ---- Made Of Tungsten Steel That's Great For Milling And Cutting Performance, Ensure Your Work Efficiency..
Wide Application ---- Used For Carving, Cutting, Engraving, Milling In Materials Like Density Board, Wood, Acrylic, Plastic, Pcb, Pvc, Pp, Mdf, Nylon, Resin, Plywood, Hardwood Etc..
High Efficiency ---- The Cnc End Mill Bit Is Equipped With A Sharp Cutting Edge And Solid Shank, Which Features High-Speed Cutting, Clean Surface, And No Glitches To Improve Your Working Efficiency..
Features
- Type: Spiral (Upcut), Cutting Type: 2 Flutes with Flat End, Shank: 1/8" (3.175mm), Cutting Diameter: 1/8" (3.175mm), Cutting Length: 15/32" (12mm), Overall Length: 1-33/64" (38.5mm)
- High Efficiency ---- The CNC end mill bit is equipped with a sharp cutting edge and solid shank, which features high-speed cutting, clean surface, and no glitches to improve your working efficiency.
- Perfect Cutting ---- Double Flute Spiral Design improved the chip removal efficiency, surface mirror finish prevent chips from sticking to bits, which makes cutting more smooth.
- Wide application ---- Used for carving, cutting, engraving, milling in materials like density board, wood, acrylic, plastic, PCB, PVC, PP, MDF, nylon, resin, plywood, hardwood etc.
- Great Material ---- Made of tungsten steel that's great for milling and cutting performance, ensure your work efficiency.
- See more on Amazon...
Brand: YAKAMOZ | Manufacturer: Yakamoz
See On Amazon #12
WZFC 3 Flute Flat End Mill CNC Milling Cutter Carbide Router Bit,3.175x3.175x25x50mm
Asin: B0CDFD4RLH | Ean: 6960135303619
3.Speed Machining And High Degree Of Smoothness.Strong And Continuous Machining Is Not Easy To Break.
Package Including:1Pcflat End Mill.
4.Sharp Sharp Angle And Precise Front Angle Sharp Sharp Edge,Cutting Design Of 3 Edge Geometry..
2.The Blade By Mirror Grinding Process.High Efficiency Of Chip Removal.
Features
- 1.material of tungsten steel.Wear-resisting and Not easy to stick milling cutter
- 2.The blade by mirror grinding process.High efficiency of chip removal
- 3.Speed machining and High degree of smoothness.Strong and Continuous machining is not easy to break
- 4.Sharp sharp angle and precise front angle sharp sharp edge,Cutting design of 3 edge geometry.
- Package Including:1pcFlat End Mill
- See more on Amazon...
Brand: WZFC | Manufacturer: WZFC
Weight: 1.10 Pounds
See On Amazon #13
AUTOTOOLHOME 1/8" Carbide Square End Mill for Micro Grain Carbide Milling Cutter for Alloy Steel Hardened Steels 4 Flutes HRC50 (1, 1/8 in)
Asin: B08N6NCW38 | Model: 02440001 | PartNumber: 02440001
This 1/8 Inch Square Drill Bit,Highly Optimized Carbide Material And Coating Pairing Means Superior Wear And Chipping Resistance In Your Cutting Applications.
Carbide End Mill Spiral Router Bit Are Used For Side Milling, End Milling, Finish Machining, Etc..
Unequal Flute Spacing And Irregular Helix Flutes Ensures Stable Machining Of Difficult-To-Cut Materials And Higher Efficiency,Vibration Absorption Provides Stability, High Efficiency Finishing And Improved Chip Disposal.
Carbide Milling Bits Diameter: 1/8'', Shank Diameter: 1/8'', Flute Length: 3/8'', Overall Length: 1-1/2", 4 Flutes.
Features
- AUTOTOOLHOME 600 Nano carbide end mill bits tools are good at working carbon steel (~HB225), alloy steel (HB225~325), pre-hardened steel (up to HRC45), hardened Steel (HRC40~45), cast iron
- Carbide milling bits Diameter: 1/8'', Shank Diameter: 1/8'', Flute length: 3/8'', Overall Length: 1-1/2, 4 Flutes
- This 1/8 inch square drill bit,highly optimized carbide material and coating pairing means superior wear and chipping resistance in your cutting applications
- Unequal flute spacing and irregular helix flutes ensures stable machining of difficult-to-cut materials and higher efficiency,Vibration absorption provides stability, high efficiency finishing and improved chip disposal
- Carbide End Mill spiral router bit are used for side milling, end milling, finish machining, etc.
- See more on Amazon...
Brand: AUTOTOOLHOME | Manufacturer: JYC International Trade Co., Ltd.
See On Amazon #14
12 PCS Carbide END Mill Cutter, AFUNTA 4 PCS 1/8" CNC Router Bits Double Flute Tools + 8 PCS 1 Flute Single Edged Milling Cutter (2 Types) for Nylon, Resin, ABS, Acrylic, PVC, MDF, Hardwood
Asin: B07FGFHTG8 | Model: AF-3-mill_cutter_12 | PartNumber: AF-3-mill_cutter_12
Perfect Cutting: The Router Bit Makes Smooth Cutting, Non-Stick Crumbs, Not Black, Increase The Speed..
Enough To Replace: There Are 12 Pcs Three Size Mill Cutter For You To Replace And Use For A Long Time..
High Quality: These Engraving Bits Have Sufficient Flexural Strength And Wear Resistance, Suitable For Precision Engraving Of Various Materials..
Super Chip Removal: Design Of Cnc Router Bit Is Oversized Spiral And Discharge Chips, To Prevent Sticking Knife, Raising Production Efficiency..
Features
- SUITABLE MATERIALS: Nylon, Resin, ABS, Acrylic, PVC, MDF, Hardwood and other three-dimensional sculpture, surface machining, etc.
- SUPER CHIP REMOVAL: Design of CNC Router Bit is oversized spiral and discharge chips, to prevent sticking knife, raising production efficiency.
- PERFECT CUTTING: The Router Bit makes smooth cutting, non-stick crumbs, not black, increase the speed.
- HIGH QUALITY: these Engraving bits have sufficient flexural strength and wear resistance, suitable for precision engraving of various materials.
- ENOUGH TO REPLACE: There are 12 pcs three size mill cutter for you to replace and use for a long time.
- See more on Amazon...
Brand: AFUNTA | Manufacturer: AFUNTA
Weight: 0.04 Pounds
See On Amazon #15
Face End Mill Set, High Speeds End Mill Cutter Holder Extension MT2 FMB22 Carbide Indexable End Mills 400R 50 22 CNC Lather End Milling Cutter with 10 Pcs APMT1604 Carbide Inserts
Asin: B09RH5TNTZ | Ean: 7618789961837
[Increase The Service Life]: Hardening And Hardening High Precision Shock Resistance, Good Permeability, Resistance To Multiple Impacts, Good Low Temperature Impact Toughness, Power Milling Machine Accessories Is Sturdiness And Durability, Which Can Increase The Service Life And Shock Resistance Of The Cutter Head.
[Machining Range]: New Coating Technology Is Adopted On The Surface, Which Has Good Oxidation Resistance And High Temperature Resistance, A Milling Machine Can Be Used For A Long Time; Precision Machining, Rough Machining, Plane Processing, And Step Processing.
[Sturdy And Durable]: End Mill Holder , The End Face Cnc Milling Cutter Is Made Of Hard Alloy, Which Has High Hardness And Good Impact Resistance. The Surface Of The Fly Cutter For Milling Machine Adopts New Coating Technology, Has Good Oxidation Resistance And High Temperature Resistance, And Can Be Used For A Long Time.
[Cutting Labor And Can Mill The Step Surface]: The Milling Cutter Disk Has The Advantages Of Cutting Labor And Can Mill The Step Surface. During Milling, The Stress Points Are Along The Direction Of Rotation Of The Milling Cutter, And The Downward Force Is Small, And The Product Is Not Easy To Deform When Milling Thin Strip Products.
Features
- [3 Times Faster]: Indexable end mill is made of cemented carbide, which has high hardness with good impact resistance; It is an ideal tool kit for heavy CNC milling; rotation and milling feed speeds are 3 times faster than normal milling cutters
- [Cutting Labor and Can Mill the Step Surface]: The milling cutter disk has the advantages of cutting labor and can mill the step surface. During milling, the stress points are along the direction of rotation of the milling cutter, and the downward force is small, and the product is not easy to deform when milling thin strip products
- [Increase the Service Life]: Hardening and hardening High precision shock resistance, good permeability, resistance to multiple impacts, good low temperature impact toughness, power milling machine accessories is sturdiness and durability, which can increase the service life and shock resistance of the cutter head
- [Sturdy and Durable]: End mill holder , The end face CNC milling cutter is made of hard alloy, which has high hardness and good impact resistance. The surface of the fly cutter for milling machine adopts new coating technology, has good oxidation resistance and high temperature resistance, and can be used for a long time
- [Machining Range]: New coating technology is adopted on the surface, which has good oxidation resistance and high temperature resistance, a milling machine can be used for a long time; precision machining, rough machining, plane processing, and step processing
- See more on Amazon...
Brand: Tiiyee | Manufacturer: Tiiyee
Dimensions: 0.39 x 0.39 x 0.39 inches
See On Amazon #16
OSCARBIDE Carbide End Mills16 Pieces/Set,CNC Spiral Router Bits,Include 4 Pieces 1/8 Shank 2 Flutes Ball Nose,12 Pieces 1 Flutes Milling Cutters for Engraving Milling 3D sculpturing Roughing
Asin: B07RD9VKC7 | Ean: 0726587445262 | UPC: 726587445262
Can Easily Remove Materials Like Wood, Acrylic, Pvc, Cooper, Aluminum, And Steel, Mdf, Resin, Pcb.
16Pcs, 4 Types Mill Cutters In A Pack, Can Save A Lot.
Rustless And Anti-Static, Best Performance With High Precision,Work Perfect On Milling Or Cutting Machines.
Widely Used For Cnc Engraving, Milling, Roughing, Hollowing, 3D Sculpturing Purposes.
Features
- Due to the Great hardness of solid Tungsten carbide Material,Long service life, not easy to break, precise
- Widely used For CNC Engraving, Milling, Roughing, Hollowing, 3D sculpturing purposes
- Can easily remove materials like Wood, acrylic, PVC, cooper, aluminum, and steel, MDF, Resin, PCB
- Rustless and anti-static, best performance with high precision,work perfect on milling or cutting machines
- 16pcs, 4 types mill cutters in a pack, can save a lot
- See more on Amazon...
Brand: OSCARBIDE | Manufacturer: OSCARBIDE TOOLS
Dimensions: 0.08 x 0.00 x 2.00 Picometer | Weight: 0.00 pounds
See On Amazon #17
4-Edge 1/8 Solid Carbide milling Cutter Cutting Diameter Solid Carbide CNC milling Head end Mill 5 pcs
Asin: B0CPF5PVL6
【List】5 X 1/8-Inch 4-Edge Carbide Square Mill Cutters.
【After-Sales】If You Have Any Questions, Please Contact Us And We Will Reply To You In Time. Your Satisfaction Is Our Greatest Pursuit.
【Quality】Industrial Quality Control To Ensure Optimal Performance.
【High Efficiency】The Drill Bit Has Sharp Edges, Capable Of Carving Quickly, High Efficiency, Durable, High Precision And Not Easy To Break. Smoke-Free And Burr-Free Processing.
Features
- Performance Solid carbide spiral drill bits are professional-grade graded, and industrial-grade quality control ensures optimal performance.
- High Efficiency The drill bit has sharp edges, capable of carving quickly, high efficiency, durable, high precision and not easy to break. Smoke-free and burr-free processing
- List 5 x 1/8-inch 4-edge carbide square mill cutters
- Quality Industrial quality control to ensure optimal performance
- After-Sales If you have any questions, please contact us and we will reply to you in time. Your satisfaction is our greatest pursuit
- See more on Amazon...
Brand: NZ | Manufacturer: NZ
See On Amazon #18
OSCARBIDE 3.175x17mm Carbide End Mills 1/8 Inch Shank Up & Down Cut CNC Spiral Router Bits 2 Flutes Milling Cutter for Engraving Milling 3D sculpturing Roughing Composite Multilayer Cutting 5pcs
Asin: B07C1YM65W | Model: 2RFHXD-1/8*1/8*17 | PartNumber: 2RFHXD-1/8*1/8*17 | Ean: 0603977806035 | UPC: 603977806035
☆Due To The Great Hardness Of Solid Tungsten Carbide, It Provides Excellent Abrasive And Wear-Resistance, Bits Stay Balanced During High Speed Rotation Process.
☆Double Flute Spiral Solid Carbide Up-Down Cut End Mill Router Bits Are Widely Used For Cnc Engraving, Milling, Roughing, Hollowing, 3D Sculpturing Purposes.
☆Fast Chip-Removal Volume And Speed, Non-Stick With Bits, Suitable For Composite Multilayer Board, Hard Wood, Polywood, Acrylic.
☆The Unique Flute Design Makes Cutting Process Easier And Faster, Smooth Cutting Without 2Nd Polishing Process, Altin-Coated Improved The Bits Service Life.
Features
- Up Down Cut,1/8" Shank X 1/8"Cutting Dia, 17mm Flute Length with 2 Spiral Flutes, Total length 38 mm, 5 pieces per pack
- The Unique Flute Design makes cutting process easier and faster, Smooth Cutting Without 2nd polishing process, ALTIN-Coated Improved the bits service life
- Due to the Great hardness of solid Tungsten carbide, it provides excellent abrasive and wear-resistance, Bits Stay Balanced during High Speed rotation process
- Fast Chip-Removal volume and Speed, Non-stick With bits, Suitable For Composite multilayer board, hard wood, polywood, acrylic
- Double Flute Spiral Solid Carbide Up-Down Cut End mill Router bits are widely used For CNC Engraving, Milling, Roughing, Hollowing, 3D sculpturing purposes
- See more on Amazon...
Brand: OSCARBIDE | Manufacturer: OSCARBIDE TOOL PTD
See On Amazon #19
Carbide End Mills, Carbide End Mill 1/8" Shank Coated CNC Engraving Bit 3.175mm 10pcs -Products Worth Buying
Asin: B088M9F7DF | Ean: 3458519324464
☎Details: Acute Cutting Edges, Can Be Use For Milling Holes, Grooves And Edges On Plates And The Process Will Be Smooth.
☎Advantage: Have Sufficient Anti-Bending Strength, Wear Resistance, High Hardness, High Wear Resistance And High Strength.
☎Well Made: It Is Made From Ultra-Fine Grain Cemented Carbide Material With Good Milling, Cutting Performance, Ensuring High Work Efficiency.
☎Well Made: It Is Made From Ultra-Fine Grain Cemented Carbide Material With Good Milling, Cutting Performance, Ensuring High Work Efficiency.
Features
- Surfaces: Well polished surfaces are quite clean, neat, and there is no glitches or burrs on the shank
- Well Made: It is made from ultra-fine grain cemented carbide material with good milling, cutting performance, ensuring high work efficiency
- Details: Acute cutting edges, can be use for milling holes, grooves and edges on plates and the process will be smooth
- Well Made: It is made from ultra-fine grain cemented carbide material with good milling, cutting performance, ensuring high work efficiency
- Advantage: Have sufficient anti-bending strength, wear resistance, high hardness, high wear resistance and high strength
- See more on Amazon...
Brand: Naroote | Manufacturer: Naroote
Dimensions: 0.39 x 3.54 x 1.97 inches
See On Amazon #20
Timunr R8 FMB22 Milling Shank with 4Pcs APMT1604 Inserts and T15 Wrench with 400R 50mm Face Milling Cutter CNC End Mills Fit for Plate Cutting and Milling Machine Workpiece Finishing
Asin: B0CG1SGPWF | Model: Does not apply | PartNumber: Does not apply
Process: The Surface Of The Cutter Head Is Treated With Thin Coating, High Hardness And Long Life..
Package Includes: 4 X Square Carbide Insert, 1 X T15 Wrench, 1 X 400R 50-22-4T Face Cutter, 1 X R8-Fmb22 Face Mill Arbor..
Application: It Is Mainly Used For Machining Plane, Groove And Cutting Workpiece On Milling Machine, With Good Milling Speed, Machining Efficiency And Machining Effect..
Design: High Accuracy Design With Good Toughness For Excellent Stability Of The Cutter Head..
Features
- Material: Made of high grade steel, finely ground for durability.
- Design: High accuracy design with good toughness for excellent stability of the cutter head.
- Process: The surface of the cutter head is treated with thin coating, high hardness and long life.
- Application: It is mainly used for machining plane, groove and cutting workpiece on milling machine, with good milling speed, machining efficiency and machining effect.
- Package Includes: 4 x square carbide insert, 1 x T15 wrench, 1 x 400R 50-22-4T face cutter, 1 x R8-FMB22 face mill arbor.
- See more on Amazon...
Brand: Timunr | Manufacturer: Timunr
Dimensions: 4.33 x 7.09 x 4.92 inches | Weight: 2.47 Pounds
See On Amazon
Looking For Something Else?
Search