FLEXMAN Pipe Bender, SH 0.5 Fan Shaped Portable Carbon Steel Tubing Bender for Galvanized Pipes, Electric Wire Pipes, Aluminum Alloy Pipes, Thin Iron Pipes, PVC Plastic Pipes
Asin: B0D2SQ6HQH | Model: flexmanc4vw67q5om | PartNumber: flexmanc4vw67q5om
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.[Scope Of Application] Manual Pipe Bender Is Suitable For Bending Electric Wires, Aluminum Alloy Pipes, Thin Iron Pipes, Pvc Plastic Pipes, Etc..
[Uniform Angle] The Pipe Bender Can Bend The Pipe Into A Uniform Angle, Making Your Operation More Precise And Convenient To Use..
[Lightweight And Portable] Lightweight, Small Size, Easy To Carry And Store, No Matter Where You Go, You Can Put It In Your Bag And Use It Anytime, Anywhere..
[Accurate Pipe Bending] Manual Pipe Bender Has A Wide Range Of Applications, Making It More Convenient To Use The Product, Accurately Bending The Pipe, Quickly Saving Time And Effort..
Features
- [Carbon Steel] Pipe bender is made of carbon steel, which is precise and durable, wear resistant and heat resistant, and is suitable for bending pipes of various materials.
- [Accurate Pipe Bending] Manual pipe bender has a wide range of applications, making it more convenient to use the product, accurately bending the pipe, quickly saving time and effort.
- [Scope of Application] Manual pipe bender is suitable for bending electric wires, aluminum alloy pipes, thin iron pipes, PVC plastic pipes, etc.
- [Lightweight and Portable] Lightweight, small size, easy to carry and store, no matter where you go, you can put it in your bag and use it anytime, anywhere.
- [Uniform angle] The pipe bender can bend the pipe into a uniform angle, making your operation more precise and convenient to use.
- See more on Amazon...
Brand: flexman | Manufacturer: flexman
See On Amazon Similar To FLEXMAN Pipe Bender SH 0.5
#1
Klein Tools 51606 Aluminum Conduit Bender Full Assembly, 1/2-Inch EMT, Wide Food Pedal, Benchmark Symbols and Angle Setter
Asin: B08L41DC9N | Model: 51606 | PartNumber: 51606 | Ean: 0092644516061 | UPC: 092644516061
Wide Foot Pedal Provides Excellent Stability, Leverage, And Comfort.
Features Klein’S Angle Setter Cat. No. 51611 That Creates A Hard Stop For Quick, Accurate, And Consistent Bends.
Includes Markings For 10-Degree, 22.5-Degree, 30-Degree, 45-Degree, 60-Degree And Corresponding Offset Multipliers.
Interior Clamp Securely Holds Conduit While Cutting With Hacksaw.
Interior Hook Surface Prevents Conduit From Rolling Or Twisting During Bends.
Bold Cast Markings And Symbols Make For Fast, Easy Conduit Alignment To Make All Bend Types, Including Saddle And Back-To-Back Bends.
Features
- 1/2-Inch assembled Aluminum Bender includes Klein s unique Angle Setter technology for time-saving, repeated accurate bends; Patent pending Angle Setter for use on 10-, 22.5-, 30-, and 45-Degree bends (adjusted for conduit spring back)
- Bold cast markings and symbols make for fast, easy conduit alignment to make all bend types, including saddle and back-to-back bends
- Wide foot pedal provides excellent stability, leverage, and comfort
- Interior hook surface prevents conduit from rolling or twisting during bends
- Includes markings for 10-Degree, 22.5-Degree, 30-Degree, 45-Degree, 60-Degree and corresponding offset multipliers
- Interior clamp securely holds conduit while cutting with hacksaw
- Features Klein s Angle Setter Cat. No. 51611 that creates a hard stop for quick, accurate, and consistent bends
- See more on Amazon...
Brand: Klein Tools | Manufacturer: Klein Tools
Dimensions: 1.00 x 1.00 x 1.00 inches | Weight: 1.00 Pounds
Warranty: Please refer to attached warranty document for information
See On Amazon #2
Antstone 1/4 3/8 1/2 O.D. Tubing Bender 3 in 1 Tube Bender 180 HVAC Copper Aluminum Tubes Bending Tool for Air Conditioning Refrigeration Repair
Asin: B09NXSPXB2
[High Quality] - High-Quality Alloy Aluminum Body, Which Is Lightweight And Durable. (Note: If The Tube Wall Thickness < 0.059”, It May Be Damaged.).
[Wide Application] - This Tubing Bender Is Widely Used For Hvac, Refrigerators, Automobiles, Hydraulic And Pneumatic Systems Maintenance, Etc..
[Professional Design] - (1)Aluminum Alloy Material Makes It Light And Portable.(2)The Soft Rubber Handle Provides A Comfortable Grip..
[3-In-1 Design] - The Tube Bender Is A 3 In 1 Tool And Will Fit 1/4", 3/8", 1/2" Outside Diameter Tubes..
Features
- [Parameters] - Application: only for soft copper / aluminum tubes; applicable tube outer diameter: 1/4" 3/8" 1/2"; applicable wall thickness: 0.027 -0.059 (0.7mm-1.5mm); bending radius: 0.82 , 1.14 , 1.43 (21mm, 29mm, 36.5mm); bending angle: 0~180 .
- [3-in-1 Design] - The tube bender is a 3 in 1 tool and will fit 1/4, 3/8, 1/2 outside diameter tubes.
- [High Quality] - High-quality alloy aluminum body, which is lightweight and durable. (NOTE: if the tube wall thickness < 0.059 , it may be damaged.)
- [Professional Design] - (1)Aluminum alloy material makes it light and portable.(2)The soft rubber handle provides a comfortable grip.
- [Wide Application] - This tubing bender is widely used for HVAC, refrigerators, automobiles, hydraulic and pneumatic systems maintenance, etc.
- See more on Amazon...
Brand: Antstone | Manufacturer: Antstone
See On Amazon #3
Fuzbaxy 1/2-inch EMT Conduit Pipe,Conduit Hand Bender Tool for 1/2 in. EMT Pipes,Bender Head Aluminum
Asin: B0B9FXGBVS | Model: SB0050 | PartNumber: SB0050 | Ean: 0699987080404 | UPC: 699987080404
Durable Construction: Made Aluminum Die Cast ,The Rugged Construction Of Aluminum Bender Head Offers Durability To Withstand Long-Term Heavy-Duty Use..
Easy Reading And Accurate:Embossed Sight Lines For 10°, 22°, 30°, 45°, 60° 90°,6 Degree Inside Radius.Making Measurements Easy To Read No Matter How You Bend It..
Large Serrated Step Provides Greater Control And Helps Prevent Slippage When Applying Force..
1/2" Etm Aluminum Conduit Hand Bender Tool.Require A 3/4" Pipe Bar For A Handle..
Features
- Material Aluminum Die Cast.Carton packing effectively protects the product from damage in transit.
- 1/2 ETM Aluminum Conduit Hand Bender Tool.Require a 3/4 pipe bar for a handle.
- Durable Construction: made aluminum die cast ,the rugged construction of aluminum bender head offers durability to withstand long-term heavy-duty use.
- Large serrated step provides greater control and helps prevent slippage when applying force.
- Easy Reading and accurate:Embossed sight lines for 10 , 22 , 30 , 45 , 60 90 ,6 Degree Inside Radius.Making measurements easy to read no matter how you bend it.
- See more on Amazon...
Brand: Fuzbaxy | Manufacturer: Fuzbaxy
See On Amazon #4
RIDGID 38048 Model 608 Heavy-Duty Stainless Steel Pipe and Tubing Bender, 1/2" Pipe Bender with Extra Long Handles, Black; Red; Silver
Asin: B008ULY74G | Model: 38048 | PartNumber: 38048 | Ean: 0095691380487 | UPC: 095691380487
Ergonomic Handles With Grips: Made With Extra Long 16" Handles That Have Ergonomic Cushioned Grips For Superior Leverage And Reduced Force When Bending.
Powerful And Stable: For Additional Stability, A Vise Clamp Block Is Built Into The Bending Form, And The Pipe Bender Tool Has A 1/2" O.D. Capacity And 1-1/2" Bend Radius.
Roll Dies And Gain Marks: Features Roll Dies In The Bending Carriage That Help To Reduce Force And Tube Flattening, And You Can Easily Ensure Proper Alignment Thanks To Clearly Visible Gain Marks.
2-Stage Design: Allows For Easy In-Place Bending From 90 Degrees To 180 Degrees Without Ever Crossing Handles, And It Quickly Lock And Unlocks With A Simple Half Turn Rotation Of The Bending Handle.
Features
- HEAVY-DUTY PIPE BENDER: Specifically designed to handle even the toughest jobs and deliver a high-quality bending performance on stainless steel and other hard tubing materials such as steel and titanium
- 2-STAGE DESIGN: Allows for easy in-place bending from 90 degrees to 180 degrees without ever crossing handles, and it quickly lock and unlocks with a simple half turn rotation of the bending handle
- ERGONOMIC HANDLES WITH GRIPS: Made with extra long 16 handles that have ergonomic cushioned grips for superior leverage and reduced force when bending
- ROLL DIES AND GAIN MARKS: Features roll dies in the bending carriage that help to reduce force and tube flattening, and you can easily ensure proper alignment thanks to clearly visible gain marks
- POWERFUL AND STABLE: For additional stability, a vise clamp block is built into the bending form, and the pipe bender tool has a 1/2 O.D. capacity and 1-1/2 bend radius
- See more on Amazon...
Brand: RIDGID | Manufacturer: Ridgid Tool Company
Dimensions: 3.00 x 24.00 x 4.00 inches | Weight: 6.61 pounds
See On Amazon #5
Wostore Tubing Bender 3 in 1 Tube Bender 180 For Tubing 1/4",3/8", 1/2", Bending Copper, Aluminium, Soft Thin Stainless Tubes For HVAC
Asin: B0CQYKL25T | Model: 1207 | PartNumber: 1207
【Multifunction Design】Special Adjustbale Hock Design, Can Adjust The Position Of Hock According To The O.D. Of The Pipe Before Your Bending. Provides Better Stability And Less Effort When Bending The Pipe..
【Extensive Application】Copper Tubing Bender Finds Extensive Usage In Hvac, Refrigeration, Automotive, Plumbing, Hydraulic And Pneumatic Systems Maintenance, Among Others. It Delivers Exceptional Bending Performance For Copper Tubes, Aluminum Tubes, Thin Iron Tubes & Thin Stainless Steel Tubes As Well As Other Rigid Tubing Materials..
【0-180°Degrees Available】The Metal Bender Offers A Wide Range Of Angles, From 0 To 180 Degrees, Allowing For Effortless Adjustment. With Its User-Friendly Operation, This Brake Bender Ensures Efficient Bending Without Consuming Excessive Time..
【High Quality Material】Pipe Bender Is Constructed From Alloy Aluminum, Offering Superior Durability. It Boasts A Lighter Weight Compared To Other Conventional Steel Bending Tools, Resulting In An Extended Lifespan. This Tube Bender Exhibits Exceptional Overall Performance, Strength, And Resistance To Corrosion. It Is Suitable For Bending Copper, Aluminum, Soft Iron, And Thin Stainless Steel Tubes. Please Note That When Bending Stainless Steel Pipes, Ensure The Thickness Does Not Exceed 0.04" (1Mm)..
Features
- Parameters of the pipe bender The 3 in 1 manual tubing and pipe bender is capable of handling tubes with an outer diameter capacity of 1/4",3/8",1/2"and a bend radius of 0.82 , 1.14 , 1.43 (21mm, 29mm, 36.5mm).
- High quality material Pipe bender is constructed from alloy aluminum, offering superior durability. It boasts a lighter weight compared to other conventional steel bending tools, resulting in an extended lifespan. This tube bender exhibits exceptional overall performance, strength, and resistance to corrosion. It is suitable for bending copper, aluminum, soft iron, and thin stainless steel tubes. Please note that when bending stainless steel pipes, ensure the thickness does not exceed 0.04 (1mm).
- Multifunction design Special adjustbale hock design, can adjust the position of hock according to the O.D. of the pipe before your bending. Provides better stability and less effort when bending the pipe.
- 0-180 Degrees available The metal bender offers a wide range of angles, from 0 to 180 degrees, allowing for effortless adjustment. With its user-friendly operation, this brake bender ensures efficient bending without consuming excessive time.
- Extensive application Copper tubing bender finds extensive usage in HVAC, refrigeration, automotive, plumbing, hydraulic and pneumatic systems maintenance, among others. It delivers exceptional bending performance for copper tubes, aluminum tubes, thin iron tubes & thin stainless steel tubes as well as other rigid tubing materials.
- See more on Amazon...
Brand: Wostore | Manufacturer: Wostore
See On Amazon #6
Pipe Tube Bender, 1/4", 3/8", 1/2", 180 OD 3 in 1 Manual Aluminum and Copper Pipe Bender for HVAC AC and Refrigerator
Asin: B0CNYTLFYM | Model: 001 | PartNumber: 001 | Ean: 0782279793240 | UPC: 782279793240
【Simple Operation】When Bending A Pipe, Adjust The Position Of The Pipe Hook, Determine The Size Of The Pipe To Be Bent, And Place The Pipe In The Appropriate Size Pipe Slot. Then Hold The Pipe Bender Handle With Both Hands And Press Inward To Slowly Bend The Pipe To The Desired Angle, And Remove The Pipe From The Bend Slot And Hook After Completing The Bend..
【After-Sales Service】Thank You Very Much For Your Support Of Our Tube Bender! We Will Provide Comprehensive After-Sales Service To Ensure Your Satisfaction And Peace Of Mind. The Copper Pipe Bender Is Guaranteed For Two Years From The Date Of Purchase. If You Encounter Any Problems During Use, You Can Contact Us By Email Or Message. Our Professional After-Sales Service Team Will Reply Your Questions In Time And Sincerely Provide You With Excellent After-Sales Service!.
【Wide Range Of Applications】As A Tool For Processing Metal Pipes, The Pipe Bender Can Realize The Need For Pipe Bending Of Customized Sizes And Angles, And Is Widely Used For Pipe Bending And Repair In A Variety Of Fields, Such As Hvac, Refrigerators, Automotive Brake Systems, Pneumatic System Repair And So On..
【High Quality, High Accuracy】The Pipe Bender Is Made Of High-Quality Aluminum Alloy Material, Lightweight But Strong And Durable, Not Easy To Rust Or Damage In The Process Of Use, Long Service Life. Meanwhile, The Precise Bending Angle Ensures The Accuracy Of Pipe Installation, And The Light Weight Of Aluminum Alloy Material Is Suitable For Mobile Working Scenarios, Combined With The Rubber Handle Provides A Comfortable Using Experience During The Working Process..
Features
- Multi-Function Design 3 in 1 pipe bender multi-function design, can be applied to different sizes of pipes, including 1/4 inch,3/8 inch and 1/2 inch OD pipes. Can meet the needs of a variety of sizes of pipe bending, extended handle design pipe uniform force to prevent pipe deformation.
- High Quality, High Accuracy The pipe bender is made of high-quality aluminum alloy material, lightweight but strong and durable, not easy to rust or damage in the process of use, long service life. Meanwhile, the precise bending angle ensures the accuracy of pipe installation, and the light weight of aluminum alloy material is suitable for mobile working scenarios, combined with the rubber handle provides a comfortable using experience during the working process.
- Simple Operation When bending a pipe, adjust the position of the pipe hook, determine the size of the pipe to be bent, and place the pipe in the appropriate size pipe slot. Then hold the pipe bender handle with both hands and press inward to slowly bend the pipe to the desired angle, and remove the pipe from the bend slot and hook after completing the bend.
- Wide Range of Applications As a tool for processing metal pipes, the pipe bender can realize the need for pipe bending of customized sizes and angles, and is widely used for pipe bending and repair in a variety of fields, such as HVAC, refrigerators, automotive brake systems, pneumatic system repair and so on.
- After-Sales Service Thank you very much for your support of our tube bender! We will provide comprehensive after-sales service to ensure your satisfaction and peace of mind. The copper pipe bender is guaranteed for two years from the date of purchase. If you encounter any problems during use, you can contact us by email or message. Our professional after-sales service team will reply your questions in time and sincerely provide you with excellent after-sales service!
- See more on Amazon...
Brand: Kamitaly | Manufacturer: Kamitaly
See On Amazon #7
Super Stars Tube Bender 1/4", 3/8", 1/2" 3-in-1 Tubing Bender 180 HVAC Copper Aluminum Tubes Bending Tool for AC Repair
Asin: B0B8S9CYNX | Ean: 0750748552513 | UPC: 750748552513
Patented, Quick Action Trigger Release Repositions Two-Stage Handle Midway Through A Bend When Both Handles Begin To Meet. This Feature Allows Easy Fabrication Of Optimized Bends Up To 180˚ With Reduced Effort, Better Control And No Crossing Of Handles!.
Newly Designed Generation 3 Benders - They Are Half The Weight Of The Older Style And Utilize Bolt-On Inserts That Are On Average 243% Stronger. With Over 600 Hours In R&D And Tooling Preparation, We Are Confident These Are The Best Benders On The Market Today.
Tube O.D.: 1/4", 3/8", 1/2" (6/10/12Mm) Durable Aluminum Alloy: The Compact Bender Kit Is Made Of High-Quality Aluminum Alloy, Which Is Corrosion-Proof. With Good Processing Performance Is Widely Used And Sturdy For Long Service Life..
For Reduced Force, Extra-Long 12 In. Handles Offer Increased Leverage While A Vise Clamp Built Into The Bending Form Delivers Extra Stability.
Features
- Super Stars 3-in-1 tube bender is a triple head, all-metal lever type tube bender for soft copper, aluminum and thin wall steel tubing. Creates smooth, tight radius bends up to 180 with minimal effort and eliminate scoring of tubing
- For reduced force, extra-long 12 in. handles offer increased leverage while a vise clamp built into the bending form delivers extra stability
- Patented, quick action trigger release repositions two-stage handle midway through a bend when both handles begin to meet. This feature allows easy fabrication of optimized bends up to 180 with reduced effort, better control and no crossing of handles!
- Tube O.D.: 1/4, 3/8, 1/2 (6/10/12mm) Durable Aluminum Alloy: The compact bender kit is made of high-quality aluminum alloy, which is corrosion-proof. With good processing performance is widely used and sturdy for long service life.
- NEWLY DESIGNED GENERATION 3 BENDERS - They are half the weight of the older style and utilize bolt-on inserts that are on average 243% stronger. With over 600 hours in R&D and tooling preparation, we are confident these are the best benders on the market today
- See more on Amazon...
Brand: Super Stars | Manufacturer: Super Stars
See On Amazon #8
Klein Tools 51603 Iron Conduit Bender Full Assembly, 1/2-Inch EMT, Wide Foot Pedal, Benchmark Symbols and Angle Setter
Asin: B08W6GJTHW | Model: 51603 | PartNumber: 51603 | Ean: 0092644516030 | UPC: 092644516030
Bold Cast Markings And Symbols Make For Fast, Easy Conduit Alignment To Make All Bend Types, Including Saddle And Back-To-Back Bends.
Features Klein’S 1/2-Inch Angle Setter (Cat. No. 51611) That Creates A Hard Stop For Quick, Accurate, And Consistent Bends.
Interior Hook Surface Prevents Conduit From Rolling Or Twisting During Bends.
Includes Markings For 10-Degrees, 22.5-Degrees, 30-Degrees, 45-Degrees, 60-Degrees And Corresponding Offset Multipliers.
Wide Foot Pedal Provides Excellent Stability, Leverage, And Comfort.
Heavy Duty Cast Ductile Iron Has The Durability Needed On The Job Site.
Features
- 1/2-Inch assembled Iron Bender includes Klein s unique Angle Setter technology for time-saving, repeated accurate bends; Patent pending Angle Setter for use on 10-, 22.5-, 30-, and 45-Degree bends (adjusted for conduit spring back)
- Heavy duty cast ductile iron has the durability needed on the job site
- Bold cast markings and symbols make for fast, easy conduit alignment to make all bend types, including saddle and back-to-back bends
- Wide foot pedal provides excellent stability, leverage, and comfort
- Interior hook surface prevents conduit from rolling or twisting during bends
- Includes markings for 10-Degrees, 22.5-Degrees, 30-Degrees, 45-Degrees, 60-Degrees and corresponding offset multipliers
- Features Klein s 1/2-Inch Angle Setter (Cat. No. 51611) that creates a hard stop for quick, accurate, and consistent bends
- See more on Amazon...
Brand: Klein Tools | Manufacturer: Klein Tools
Dimensions: 2.50 x 39.88 x 9.62 inches
Warranty: Please refer to attached warranty document.
See On Amazon #9
Wostore 1/2" Heavy Duty Tubing Bender Tube Bender Roller 180 HVAC Copper Tool for Copper Pipe, Aluminum Pipe, Iron Pipe, Stainless Steel Pipe
Asin: B0CQYLDBMD | Model: 1209 | PartNumber: 1209
【Enhanced Design】The Inclusion Of Extra-Long 22.05"/56Cm Handles (Featuring A Non-Slip Rubber Grip) Enhances Leverage In The Bending Process, Thereby Reducing Required Force. The Addition Of A Non-Slip Handle Cover Allows For Prolonged Operation Without Experiencing Fatigue. This Bender Is Equipped With Ergonomic Long Handles And A Knurled Grip That Ensures Optimal Comfort During Use, Providing An Exceptional Working Experience..
【Extensive Application】This Heavy-Duty Tubing Bender Finds Extensive Usage In Hvac, Refrigeration, Automotive, Hydraulic And Pneumatic Systems Maintenance, Among Others. It Delivers Exceptional Bending Performance For Copper Tubes, Aluminum Tubes, Iron Tubes & Stainless Steel Tubes As Well As Other Rigid Tubing Materials..
【0-180°Degrees Available】The Metal Bender Offers A Wide Range Of Angles, From 0 To 180 Degrees, Allowing For Effortless Adjustment Without The Need To Cross Handles. With Its User-Friendly Operation, This Steel Brake Bender Ensures Efficient Bending Without Consuming Excessive Time..
【Durable Material】The Pipe Bender Is Constructed From Corrosion-Resistant Steel, Offering Superior Durability. It Boasts A Lighter Weight Compared To Other Conventional Steel Bending Tools, Resulting In An Extended Lifespan. This Tube Bender Exhibits Exceptional Overall Performance, Strength, And Resistance To Corrosion. It Is Suitable For Bending Copper, Aluminum, Soft Iron, And Stainless Steel Tubes. Please Note That When Bending Stainless Steel Pipes, Ensure The Thickness Does Not Exceed 0.08" (2Mm)..
Features
- Parameters of the pipe bender The manual tubing and pipe bender is capable of handling tubes with an outer diameter capacity of 1/2" (12mm) and a bend radius of 1.43" (36.5mm).
- Durable material The pipe bender is constructed from corrosion-resistant steel, offering superior durability. It boasts a lighter weight compared to other conventional steel bending tools, resulting in an extended lifespan. This tube bender exhibits exceptional overall performance, strength, and resistance to corrosion. It is suitable for bending copper, aluminum, soft iron, and stainless steel tubes. Please note that when bending stainless steel pipes, ensure the thickness does not exceed 0.08 (2mm).
- Enhanced design The inclusion of extra-long 22.05/56cm handles (featuring a non-slip rubber grip) enhances leverage in the bending process, thereby reducing required force. The addition of a non-slip handle cover allows for prolonged operation without experiencing fatigue. This bender is equipped with ergonomic long handles and a knurled grip that ensures optimal comfort during use, providing an exceptional working experience.
- 0-180 Degrees available The metal bender offers a wide range of angles, from 0 to 180 degrees, allowing for effortless adjustment without the need to cross handles. With its user-friendly operation, this steel brake bender ensures efficient bending without consuming excessive time.
- Extensive application This heavy-duty tubing bender finds extensive usage in HVAC, refrigeration, automotive, hydraulic and pneumatic systems maintenance, among others. It delivers exceptional bending performance for copper tubes, aluminum tubes, iron tubes & stainless steel tubes as well as other rigid tubing materials.
- See more on Amazon...
Brand: Wostore | Manufacturer: Wostore
See On Amazon #10
uxcell 2 in 1 Pipe Tube Bender 180 Degree Tool for 3/8-inch 1/2-inch OD Brass Aluminum Thin Walled Steel Tubing
Asin: B071W8CM97 | Model: US-SA-AJD-195632 | PartNumber: US-SA-AJD-195632
Designed To Smoothly Bend Copper, Brass, Aluminum, And Other Thin Walled Steel Tubing Without Crimping.
Opens Up Fully To Allow You To Put On The Pipe Even When The Pipe Is Partly Installed.
Marked Degrees Gauge Accurate Angles From 0-180 Degrees.
2 Channels Design For Working On 3/8-Inch (10Mm) And 1/2-Inch (12Mm) O.D. Tube.
Features
- 2 in 1 Tube Bender Tool for Pipe Bending
- 2 channels design for working on 3/8-inch (10mm) and 1/2-inch (12mm) O.D. tube
- Designed to smoothly bend copper, brass, aluminum, and other thin walled steel tubing without crimping
- Marked degrees Gauge accurate angles from 0-180 degrees
- Opens up fully to allow you to put on the pipe even when the pipe is partly installed
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 2.76 x 17.72 x 3.94 Inches | Weight: 0.00 pounds
See On Amazon #11
Bonvoisin 3/8" 1/2" OD Tubing Bender 2 in 1 Manual Bender 180 HVAC Soft Copper Aluminum Tubes Bending Tool for Air Conditioning Refrigeration Repair
Asin: B08HDC4B2Q | Model: -81 | PartNumber: -81 | Ean: 0780682679687 | UPC: 780682679687
[2-In-1] - This Tubing Bender Tool Is A 2 In 1 Tool And Will Fit 3/8’’、1/2’’ Tubes, Which Is Convenient For Different Size Tube Bending And Save Cost..
[Wide Applications] - This Tubing Bender Is Suitable For Hvac, Air Conditioning, And Refrigerator Pipe Repairs..
[Humanized Design] - (1)The Manual Bender Uses The Principle Of Leverage, With Which You Can Easily Bend The Tubes. (2)The Round Hole Of The Upper Handle Can Test The Size Of The Copper Tube. (3)The Bender Is Only About 1Kg, Light And Portable..
[High Quality] - The Tube Bender Is Forged From High-Quality Aluminum Alloy, Which Is Light And Durable.(Note: If The Pipe Wall Thickness<0.6Mm, It Will Cause Deformation Of The Tube.).
Features
- [Parameters] - Application: only for copper / aluminum tubes; applicable tube O.D.: 3/8" 1/2"; applicable tube wall thickness: 0.6mm-2mm; bending radius of 10mm: 23mm (3/8"), bending radius of 12mm (1/2"): 35.8mm; bending angle: 0~180 .
- [High Quality] - The tube bender is forged from high-quality aluminum alloy, which is light and durable.(NOTE: if the pipe wall thickness<0.6mm, it will cause deformation of the tube.)
- [2-in-1] - This tubing bender tool is a 2 in 1 tool and will fit 3/8 1/2 tubes, which is convenient for different size tube bending and save cost.
- [Humanized Design] - (1)The manual bender uses the principle of leverage, with which you can easily bend the tubes. (2)The round hole of the upper handle can test the size of the copper tube. (3)The bender is only about 1kg, light and portable.
- [Wide Applications] - This tubing bender is suitable for HVAC, air conditioning, and refrigerator pipe repairs.
- See more on Amazon...
Brand: Bonvoisin | Manufacturer: Bonvoisin
See On Amazon #12
Hydraulic Pipe Bender 1/2 Manual Copper Exhaust Tube Bender Tool 6 Dies (1/2,3/4,1,1-1/4,1-1/2,2) Adjustable Rollers 90-180 Bending Steel Iron Metal Ratcheting
Asin: B0CM6KVXNR | Model: 164789-5354-1704392913 | PartNumber: 164789-5354-1704392913 | Ean: 0840366421800 | UPC: 840366421800
🔔[𝟔 𝐃𝐢𝐞𝐬 𝐚𝐧𝐝 𝟔 𝐀𝐝𝐣𝐮𝐬𝐭𝐚𝐛𝐥𝐞 𝐑𝐨𝐥𝐥𝐞𝐫 𝐋𝐞𝐯𝐞𝐥𝐬] - This Copper Pipe Bender Includes 1/2, 3/4, 1, 1-1/4, 1-1/2, 2 A Total Of 6 Precision Casting Dies; At The Same Time There Are 6 Adjustable Roller Levels To Meet The Bending Angle Of The Tube..
🔔[𝐄𝐱𝐜𝐞𝐥𝐥𝐞𝐧𝐭 𝐒𝐭𝐫𝐮𝐜𝐭𝐮𝐫𝐞] - High Quality Steel Frame Material Can Be Applied To A Variety Of Pipe Bending Occasions，Steel Frame Can Work In Many Condition. Compact Design, Smooth Appearance, Wear Resistance, Saving Time And Labor On Bending Tubes..
🔔[𝐓𝐡𝐞 𝐔𝐧𝐢𝐪𝐮𝐞 𝐆𝐞𝐚𝐫 𝐃𝐞𝐬𝐢𝐠𝐧 𝐀𝐭 𝐓𝐡𝐞 𝐄𝐧𝐝 𝐨𝐟 𝐓𝐡𝐞 𝐇𝐲𝐝𝐫𝐚𝐮𝐥𝐢𝐜 𝐑𝐨𝐝] - The Upper End Of The Hydraulic Rod Is Made Of Vinyl Material, Which Is Comfortable To The Hand. The Gear At The End Of The Hydraulic Lever Is Used To Control The Opening And Closing Of The Valve. The Hydraulic Lever Is Aligned With The Valve, And The Lift Of The Pipe Bender Can Be Controlled By Turning The Valve Slightly..
🔔[𝟗𝟎-𝟏𝟖𝟎° 𝐁𝐞𝐧𝐝𝐢𝐧𝐠] - 12 Ton Copper Pipe Bender Can Bend The Pipe Within 90-180 Degrees, Reducing Your Workload And Improving Work Efficiency..
Features
- [ ] - Dead load: 12Ton, Stroke: 130 mm(5.12), adjustable height:255cm(8.36) in maximum,sizes of dies: 1/2, 3/4, 1, 1-1/4, 1-1/12 and 2,, oil capacity: 0.75kg(1.65 lbs).
- [ - ] - 12 Ton copper pipe bender can bend the pipe within 90-180 degrees, reducing your workload and improving work efficiency.
- [ ] - This copper pipe bender includes 1/2, 3/4, 1, 1-1/4, 1-1/2, 2 a total of 6 Precision casting dies; at the same time there are 6 adjustable roller levels to meet the bending angle of the tube.
- [ ] - The upper end of the hydraulic rod is made of vinyl material, which is comfortable to the hand. The gear at the end of the hydraulic lever is used to control the opening and closing of the valve. The hydraulic lever is aligned with the valve, and the lift of the pipe bender can be controlled by turning the valve slightly.
- [ ] - High quality steel frame material can be applied to a variety of pipe bending occasions steel frame can work in many condition. Compact design, smooth appearance, wear resistance, saving time and labor on bending tubes.
- See more on Amazon...
Brand: FAHKNS | Manufacturer: FAHKNS
Dimensions: 11.65 x 20.47 x 4.13 inches | Weight: 19.80 Pounds
See On Amazon #13
1/2" Hydraulic Pipe Bender 16 Ton Manual Copper Exhaust Tube Bender Tool 8 Dies (1/2",3/4",1",1-1/4",1-1/2",2",2.5", 3") Adjustable Rollers 90-180 Bending Steel Iron Metal Ratcheting
Asin: B0C88Y87DL | Model: hydraulic pipe bende | PartNumber: hydraulic pipe bende
🛠️[𝟖 𝐃𝐢𝐞𝐬 𝐚𝐧𝐝 𝟖 𝐚𝐝𝐣𝐮𝐬𝐭𝐚𝐛𝐥𝐞 𝐑𝐨𝐥𝐥𝐞𝐫 𝐋𝐞𝐯𝐞𝐥𝐬] - This Dobladora De Tubo De Metal Includes 1/2", 3/4", 1", 1-1/4", 1-1/2", 2",2.5", 3" A Total Of 8 Precision Casting Dies; At The Same Time There Are 6 Adjustable Roller Levels To Meet The Bending Angle Of The Tube..
🛠️[𝐓𝐡𝐞 𝐔𝐧𝐢𝐪𝐮𝐞 𝐆𝐞𝐚𝐫 𝐃𝐞𝐬𝐢𝐠𝐧 𝐀𝐭 𝐓𝐡𝐞 𝐄𝐧𝐝 𝐨𝐟 𝐓𝐡𝐞 𝐇𝐲𝐝𝐫𝐚𝐮𝐥𝐢𝐜 𝐑𝐨𝐝] - The Upper End Of The Hydraulic Rod Is Made Of Vinyl Material, Which Is Comfortable To The Hand. The Gear At The End Of The Hydraulic Lever Is Used To Control The Opening And Closing Of The. The Hydraulic Lever Is Aligned With The, And The Lift Of The Pipe Bender Can Be..
🛠️[𝟗𝟎-𝟏𝟖𝟎° 𝐁𝐞𝐧𝐝𝐢𝐧𝐠] - 16Ton Hydraulic Tube Bender Can Bend The Pipe Within 90-180 Degrees, Reducing Your Workload And Improving Work Efficiency. It Can Be Used In Construction, Plumbing, Petroleum, Mining, Shipbuilding And Other Industries..
🛠️[𝟏𝟔 𝐓𝐨𝐧] - Copper Pipe Bender-Dead Load: 16 Ton, Stroke: 5.12(130 Mm), Adjustable Height: 13" (330 Mm) Minimum, 18" (460 Mm) Maximum, Bending Range: 1/2-3" (1.3-7.6 Cm), Diameter: 1/2 (1.3 Cm), Oil Capacity: 1000G (2.2 Lbs)..
Features
- [ ] - Hydraulic pipe bender is work in Any Condition. Compact Design, Smooth Appearance, Wear Resistance, Saving Time and Labor on Bending Tubes. Stable Four-feet Design Enhances Working Time and Quality for Continuously Bending Tubes.
- [ ] - Copper Pipe Bender-Dead Load: 16 Ton, Stroke: 5.12(130 mm), Adjustable Height: 13 (330 mm) Minimum, 18 (460 mm) Maximum, Bending Range: 1/2-3 (1.3-7.6 cm), Diameter: 1/2 (1.3 cm), Oil Capacity: 1000g (2.2 lbs).
- [ ] - This dobladora de tubo de metal includes 1/2, 3/4, 1, 1-1/4, 1-1/2, 2,2.5, 3 a total of 8 Precision casting dies; at the same time there are 6 adjustable roller levels to meet the bending angle of the tube.
- [ - ] - 16Ton hydraulic tube bender can bend the pipe within 90-180 degrees, reducing your workload and improving work efficiency. It can be used in construction, plumbing, petroleum, mining, shipbuilding and other industries.
- [ ] - The upper end of the hydraulic rod is made of vinyl material, which is comfortable to the hand. The gear at the end of the hydraulic lever is used to control the opening and closing of the. The hydraulic lever is aligned with the, and the lift of the pipe bender can be.
- See more on Amazon...
Brand: GCCSJ | Manufacturer: GCCSJ
Dimensions: 7.48 x 26.77 x 24.80 inches
See On Amazon #14
FURVOCHY Tube Bender, 1/4 3/8 1/2 (6/8/10mm) O.D. Tubing Bender 3 in 1 Tube Bender 180 HVAC Copper Aluminum Tubes Bending Tool for Air Conditioning Refrigeration Repair
Asin: B0C52XS3VZ | Model: ST-612A | PartNumber: ST-612A | Ean: 0739713841340 | UPC: 739713841340
✨Professional Design - Aluminum Alloy Material Makes It Light And Portable;The Soft Rubber Handle Provides A Comfortable Grip.The Pipe Bender Is Easy To Operate And Portable So You Can Take It From Site To Site.New Design For Accurate And Tight Bends Up To 180 Degree Angles With Index Marks For The Most Accurate Bends..
✨Detail Parameters - Only For Soft Copper / Aluminum Tubes; Applicable Tube Outer Diameter: 1/4"、3/8"、1/2"; Applicable Wall Thickness: 0.027”-0.059”(0.7Mm-1.5Mm); Bending Radius: 0.82”, 1.14”, 1.43”(21Mm, 29Mm, 36.5Mm); Bending Angle: 0~180°..
✨Widely Use - The Bender Used For Easy Bending Of Various Tubing Such As Copper, Stainless Steel, Steel And Titanium, To A Maximum Of 180°,As For Hvac, Refrigerators, Automobiles, Hydraulic And Pneumatic Systems Maintenance, Etc..
✨High Quality - The Metal Bender Is Forged From High-Quality Aluminum Alloy, Which Is Lightweight And Durable. Made With High Precision And Premium Machining Quality, It Is A Robust Tool That Is Built To Last(Please Note: If The Tube Wall Thickness < 0.059”, It May Be Damaged.).
Features
- NEW UPGRADE GENERATION 3 BENDERS - They are half the weight of the older style and utilize bolt-on inserts that are on average 243% stronger. With over 600 hours in R&D and tooling preparation, make it is the best benders on the market today
- HIGH QUALITY - The metal bender is forged from high-quality aluminum alloy, which is lightweight and durable. Made with high precision and premium machining quality, it is a robust tool that is built to last(PLEASE NOTE: if the tube wall thickness < 0.059 , it may be damaged.)
- PROFESSIONAL DESIGN - Aluminum alloy material makes it light and portable;The soft rubber handle provides a comfortable grip.The pipe bender is easy to operate and portable so you can take it from site to site.New design for accurate and tight bends up to 180 degree angles with index marks for the most accurate bends.
- WIDELY USE - The bender used for easy bending of various tubing such as copper, stainless steel, steel and titanium, to a maximum of 180 ,as for HVAC, refrigerators, automobiles, hydraulic and pneumatic systems maintenance, etc.
- DETAIL PARAMETERS - Only for soft copper / aluminum tubes; applicable tube outer diameter: 1/4 3/8 1/2; applicable wall thickness: 0.027 -0.059 (0.7mm-1.5mm); bending radius: 0.82 , 1.14 , 1.43 (21mm, 29mm, 36.5mm); bending angle: 0~180 .
- See more on Amazon...
Brand: FURVOCHY | Manufacturer: FURVOCHY
Dimensions: 2.68 x 11.73 x 3.98 inches
See On Amazon #15
1/2" EMT Bender - Hand Bender with Head - Aluminum Conduit Bender Full Assembly - Conduit Metal Pipe Bender without handle - Pack of 1
Asin: B0C112B2L3 | Model: EMT-B-1/2 | PartNumber: EMT-B-1/2 | Ean: 0645637852792 | UPC: 645637852792
Convenient Usage: The Bender's Comfortable Grip Handle And Ratcheting Mechanism Make It Easy And Efficient To Use, Even On Tough Jobs That Require Multiple Bends.The Grooved Internal Hook Surface Of The Ductile Pipe Bender Prevents Slippage While Applying Extra Force In Use To Avoid Accidents..
Compact Design : With Its Lightweight Design And Compact Size, The Emt Bender Is Easy To Transport And Store, Making It A Convenient Tool To Have On Hand For Any Electrical Project.The Heat-Treated Sturdy Stress Points Allow The Users To Get Accurate Bends With Ease.
Multi Purpose : The Emt Bender Is A Versatile And Essential Tool For Electricians And Diy Enthusiasts. It's Designed To Make Bending Electrical Conduit Easy And Precise, Ensuring That Your Electrical Systems Fit Together Perfectly..
Adjustable Angle : The Emt Bender's Adjustable Angle Guide Allows You To Create Precise Bends Up To 90 Degrees, Ensuring That Your Conduit Fits Perfectly Into Any Electrical System, Whether It's A Commercial Or Residential Project..
Features
- RELIABLE AND DURABLE CONSTRUCTION: The bender features a durable construction that can withstand heavy use and tough job site conditions, making it a reliable tool that you can count on for years to come.The markings are raised and cast into both sides to aid visibility of the users
- ADJUSTABLE ANGLE : The EMT Bender's adjustable angle guide allows you to create precise bends up to 90 degrees, ensuring that your conduit fits perfectly into any electrical system, whether it's a commercial or residential project.
- CONVENIENT USAGE: The bender's comfortable grip handle and ratcheting mechanism make it easy and efficient to use, even on tough jobs that require multiple bends.The grooved internal hook surface of the ductile pipe bender prevents slippage while applying extra force in use to avoid accidents.
- MULTI PURPOSE : The EMT Bender is a versatile and essential tool for electricians and DIY enthusiasts. It's designed to make bending electrical conduit easy and precise, ensuring that your electrical systems fit together perfectly.
- COMPACT DESIGN : With its lightweight design and compact size, the EMT Bender is easy to transport and store, making it a convenient tool to have on hand for any electrical project.The heat-treated sturdy stress points allow the users to get accurate bends with ease
- See more on Amazon...
Brand: Generic | Manufacturer: DMNI
See On Amazon #16
1/2 EMT Bender - Hand Bender with Head and Steel Handle - Aluminum Conduit Bender Full Assembly - Conduit Metal Pipe Bender with handle - Pack of 1
Asin: B0C5YWC65F | Ean: 0658865108258 | UPC: 658865108258
Convenient Usage: The Bender's Comfortable Grip Handle And Ratcheting Mechanism Make It Easy And Efficient To Use, Even On Tough Jobs That Require Multiple Bends.The Grooved Internal Hook Surface Of The Ductile Pipe Bender Prevents Slippage While Applying Extra Force In Use To Avoid Accidents..
Compact Design : With Its Lightweight Design And Compact Size, The Emt Bender Is Easy To Transport And Store, Making It A Convenient Tool To Have On Hand For Any Electrical Project.The Heat-Treated Sturdy Stress Points Allow The Users To Get Accurate Bends With Ease.
Multi Purpose : The Emt Bender Is A Versatile And Essential Tool For Electricians And Diy Enthusiasts. It's Designed To Make Bending Electrical Conduit Easy And Precise, Ensuring That Your Electrical Systems Fit Together Perfectly..
Adjustable Angle : The Emt Bender's Adjustable Angle Guide Allows You To Create Precise Bends Up To 90 Degrees, Ensuring That Your Conduit Fits Perfectly Into Any Electrical System, Whether It's A Commercial Or Residential Project..
Features
- RELIABLE AND DURABLE CONSTRUCTION: The bender features a durable construction that can withstand heavy use and tough job site conditions, making it a reliable tool that you can count on for years to come.The markings are raised and cast into both sides to aid visibility of the users
- ADJUSTABLE ANGLE : The EMT Bender's adjustable angle guide allows you to create precise bends up to 90 degrees, ensuring that your conduit fits perfectly into any electrical system, whether it's a commercial or residential project.
- CONVENIENT USAGE: The bender's comfortable grip handle and ratcheting mechanism make it easy and efficient to use, even on tough jobs that require multiple bends.The grooved internal hook surface of the ductile pipe bender prevents slippage while applying extra force in use to avoid accidents.
- MULTI PURPOSE : The EMT Bender is a versatile and essential tool for electricians and DIY enthusiasts. It's designed to make bending electrical conduit easy and precise, ensuring that your electrical systems fit together perfectly.
- COMPACT DESIGN : With its lightweight design and compact size, the EMT Bender is easy to transport and store, making it a convenient tool to have on hand for any electrical project.The heat-treated sturdy stress points allow the users to get accurate bends with ease
- See more on Amazon...
Brand: Generic | Manufacturer: DMNI
See On Amazon #17
Antstone 1/2 OD Tubing Bender Roller Type Pipe Bender 180 HVAC Copper Aluminum Tube Bending Tool for Air Conditioning Refrigeration Repair
Asin: B09NVYWS5H
[Fixed Hook] - With A Fixed Hook, The Pipe Bender Can Hold The Pipe Stably And Firmly..
[Wide Application] - This Tubing Bender Is Widely Used For Hvac, Refrigerators, Automobiles, Hydraulic And Pneumatic Systems Maintenance, Etc..
[Professional Design] - (1)Aluminum Alloy Material Makes It Light And Portable.(2)The Non-Slip Rubber Handle Provides A Comfortable Grip..
[Roller Design] - The Roller Makes The Pipe Bend Smoother And Will Not Scratch The Pipe..
Features
- [Parameters] - This tubing bender is only for 1/2 O.D. soft copper / aluminum / stainless steel pipes; applicable wall thickness: soft copper / aluminum pipes: 0.023"~0.078"(0.6~2mm); bending radius: 1.4". (NOTE: if the pipe wall is too thin, it may be damaged.)
- [Roller Design] - The roller makes the pipe bend smoother and will not scratch the pipe.
- [Fixed Hook] - With a fixed hook, the pipe bender can hold the pipe stably and firmly.
- [Professional Design] - (1)Aluminum alloy material makes it light and portable.(2)The non-slip rubber handle provides a comfortable grip.
- [Wide Application] - This tubing bender is widely used for HVAC, refrigerators, automobiles, hydraulic and pneumatic systems maintenance, etc.
- See more on Amazon...
Brand: Antstone | Manufacturer: Antstone
See On Amazon #18
IDEAL Electrical 74-001 Ductile Iron Bender Head Conduit Metal Pipe Bender for 1/2 in. EMT Pipes. Benders
Asin: B000ZZCP1W | Model: 783250740017 | PartNumber: 783250740017 | Ean: 0783250740017 | UPC: 783250740017
Durable Construction: Made With Ductile Iron, The Rugged Construction Of Iron Bender Head Offers Durability To Withstand Long-Term Heavy-Duty Use..
Product Specifications: The Ductile Emt Bender Is Suitable To Bend 0.5 In. Emt Metal Pipes And Uses Industrial Standard Benfield Bending System For Bending.
Convenient Usage: The Grooved Internal Hook Surface Of The Ductile Iron Pipe Bender Head Prevents Slippage While Applying Extra Force In Use To Avoid Accidents. The Heat-Treated Sturdy Stress Points Allow The Users To Get Accurate Bends With Ease.
Precision Bending: The Metal Pipe Bender Is Equipped With Markings Locating Star, Arrow, Degree Scale, And Rim Notch To Get Perfect Bends. The Markings Are Raised And Cast Into Both Sides To Aid Visibility Of The Users.
Features
- Conduit Bender head: ideally used to bend iron and metal pipes, the iron conduit bender offers application in electrical repairs and installation to fit pipes around all ceiling, corners, wall, and irregularly shaped passages
- Precision Bending: the metal pipe bender is equipped with markings locating star, arrow, degree scale, and rim notch to get perfect bends. The markings are raised and cast into both sides to aid visibility of the users
- Durable Construction: made with ductile iron, the rugged construction of iron bender head offers durability to withstand long-term heavy-duty use.
- Convenient Usage: the grooved internal hook surface of the ductile iron pipe bender head prevents slippage while applying extra force in use to avoid accidents. The heat-treated sturdy stress points allow the users to get accurate bends with ease
- Product Specifications: The Ductile EMT bender is suitable to bend 0.5 in. EMT metal pipes and uses industrial standard Benfield bending system for bending
- See more on Amazon...
Brand: Ideal Industries | Manufacturer: Ideal
Dimensions: 2.00 x 9.00 x 5.00 Inches | Weight: 0.01 pounds
See On Amazon #19
Hydraulic Pipe Bender 1/2 Inch Manual Copper Exhaust Tube Bender Tool 6 Dies (1/2",3/4",1",1-1/4",1-1/2",2") Adjustable Rollers 90-180 Degree Bending Steel Iron Metal Ratcheting
Asin: B09JK4JSG1 | Ean: 0789481408658 | UPC: 789481408658
💖[𝟏𝟖𝟎 𝐃𝐞𝐠𝐫𝐞𝐞 𝐁𝐞𝐧𝐝𝐢𝐧𝐠] - 12Ton Exhaust Pipe Bender Can Bend The Pipe Within 90-180 Degrees, Reducing Your Workload And Improving Work Efficiency. It Can Be Used In Construction, Chemical, Plumbing, Petroleum, Mining, Shipbuilding And Other Industries..
💖[𝟏𝟎𝟎% 𝐒𝐚𝐭𝐢𝐬𝐟𝐚𝐜𝐭𝐨𝐫𝐲 𝐒𝐞𝐫𝐯𝐢𝐜𝐞] - Please Rest Assured To Buy Our Pipe Tube Bender. Our Products Are Guaranteed. If You Encounter Any Problems During Use, Please Feel Free To Contact Us. We Will Definitely Give You A Satisfactory Answer..
💖[𝐓𝐡𝐞 𝐔𝐧𝐢𝐪𝐮𝐞 𝐆𝐞𝐚𝐫 𝐃𝐞𝐬𝐢𝐠𝐧 𝐀𝐭 𝐓𝐡𝐞 𝐄𝐧𝐝 𝐨𝐟 𝐓𝐡𝐞 𝐇𝐲𝐝𝐫𝐚𝐮𝐥𝐢𝐜 𝐑𝐨𝐝] - The Upper End Of The Hydraulic Rod Is Made Of Vinyl Material, Which Is Comfortable To The Hand. The Gear At The End Of The Hydraulic Lever Is Used To Control The Opening And Closing Of The Valve. The Hydraulic Lever Is Aligned With The Valve, And The Lift Of The Pipe Bender Can Be Controlled By Turning The Valve Slightly..
💖[𝟔 𝐃𝐢𝐞𝐬 𝐚𝐧𝐝 𝟔 𝐚𝐝𝐣𝐮𝐬𝐭𝐚𝐛𝐥𝐞 𝐑𝐨𝐥𝐥𝐞𝐫 𝐋𝐞𝐯𝐞𝐥𝐬] - This Copper Pipe Bender Includes 1/2", 3/4", 1", 1-1/4", 1-1/2", 2" A Total Of 6 Precision Casting Dies; At The Same Time There Are 6 Adjustable Roller Levels To Meet The Bending Angle Of The Tube..
Features
- [ - ] - 12Ton hydraulic pipe bender is made of high-quality steel, with a compact overall structure design, smooth appearance, wear-resistant, and can withstand a weight of up to 12 tons. The hydraulic system and the return spring system can help you efficiently complete the bending work.
- [ ] - This copper pipe bender includes 1/2, 3/4, 1, 1-1/4, 1-1/2, 2 a total of 6 Precision casting dies; at the same time there are 6 adjustable roller levels to meet the bending angle of the tube.
- [ ] - 12Ton exhaust pipe bender can bend the pipe within 90-180 degrees, reducing your workload and improving work efficiency. It can be used in construction, chemical, plumbing, petroleum, mining, shipbuilding and other industries.
- [ ] - The upper end of the hydraulic rod is made of vinyl material, which is comfortable to the hand. The gear at the end of the hydraulic lever is used to control the opening and closing of the valve. The hydraulic lever is aligned with the valve, and the lift of the pipe bender can be controlled by turning the valve slightly.
- [ % ] - Please rest assured to buy our pipe tube bender. Our products are guaranteed. If you encounter any problems during use, please feel free to contact us. We will definitely give you a satisfactory answer.
- See more on Amazon...
Brand: GYZJ | Manufacturer: GYZJ
Dimensions: 6.69 x 25.59 x 22.83 inches
See On Amazon #20
Flexzion Manual Aluminum Tubing Bender - 1/2 Inch OD Tube and Pipe Bender for HVAC Refrigeration, Aluminum, Brass, and Soft Copper Pipe Bender Tool with Wide Hook Grip up to 180-Degree Bending
Asin: B017D2YXEQ | Model: TUB_BEND_CT364 | PartNumber: TUB_BEND_CT364 | Ean: 0814870024734 | UPC: 814870024734
Ergonomic Wide Hook Grip - The Wide Hook Design Ensures A Secure Grip On Tubing, Allowing For Precise And Controlled Bending, While The Soft Rubber Handle Provides Additional Comfort..
Ideal For Various Projects - This Ratchet Tube Bender Hvac Is Perfect For Plumbing Repairs, Hvac System Installations, Automotive Tasks, And More For Professionals And Diy Enthusiasts..
Durable And Reliable Construction - Crafted With High-Quality Materials, This Aluminum Copper Bender Hvac Offers Long-Lasting Performance And Dependability, Making It A Valuable Addition To Your Tool Collection..
Precise And Uniform Bends - This Copper Pipe Bender Tool Features Clear Markings That Display The Bend Angle, Enabling You To Create Bends Up To 180 Degrees, Guaranteeing Consistent And Professional Results..
Features
- Versatile Bending Capabilities - Effortlessly bend most 1/2" O.D. hydraulic tubings, soft copper, aluminum, brass, steel, and more with this 1/2 copper tubing bender tool.
- Precise and Uniform Bends - This copper pipe bender tool features clear markings that display the bend angle, enabling you to create bends up to 180 degrees, guaranteeing consistent and professional results.
- Ergonomic Wide Hook Grip - The wide hook design ensures a secure grip on tubing, allowing for precise and controlled bending, while the soft rubber handle provides additional comfort.
- Durable and Reliable Construction - Crafted with high-quality materials, this aluminum copper bender hvac offers long-lasting performance and dependability, making it a valuable addition to your tool collection.
- Ideal for Various Projects - This ratchet tube bender hvac is perfect for plumbing repairs, HVAC system installations, automotive tasks, and more for professionals and DIY enthusiasts.
- See more on Amazon...
Brand: Flexzion | Manufacturer: Flexzion
Dimensions: 3.19 x 19.02 x 4.69 inches | Weight: 3.25 pounds
See On Amazon
Looking For Something Else?
Search