Carbon Fiber Pattern Rear Bumper Side Corner Diffuser Lip for Tesla Model Y Splitters Lower Corner Spoiler Aprons Wrap Angle Accessories 2PCS (Gloss White)
Asin: B0D2SSQWLZ | Model: HHJ5 | PartNumber: HHJ5
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Installation Can Be Easily Done, No Modification Required. ***Please Note: Package Does Not Come With Instructions. Professional Installation Is Always Recommended..
Enhance The Sense Of Hierarchy, Upgrade The Exterior Decoration, And Enhance The Sports Atmosphere..
Molded And Designed Depend On The Original Data, And Maintaining The Original Car Model. Fits Perfectly To The Edges Without Protrusions Or Gaps..
Unique Style Helps Add A Sleek And Personalized Look. Shark Fins Design Provides A Perfect Aerodynamic Appearance Upgrade To Your Vehicle..
Features
- Fits 2020-2024 Tesla Model Y. Please carefully check the compatibility information and make sure your vehicle model will be correct for this rear diffuser before purchase.
- Unique style helps add a sleek and personalized look. Shark Fins Design provides a perfect aerodynamic appearance upgrade to your vehicle.
- Installation can be easily done, no modification required. ***Please note: Package does not come with instructions. Professional installation is always recommended.
- Molded and designed depend on the original data, and maintaining the original car model. Fits perfectly to the edges without protrusions or gaps.
- Enhance the sense of hierarchy, upgrade the exterior decoration, and enhance the sports atmosphere.
- See more on Amazon...
Brand: STAMOO | Manufacturer: STAMOO
See On Amazon Similar To Carbon Fiber Pattern Rear Bumper
#1
Black Carbon Fiber License Plate Frame, 2 Pack Glossy & Waterproof Plastic Number Plate Frame Print Carbon Fiber Pattern for Man and Women (with Fasteners and Screws).
Asin: B09J21GY1D | Model: LX0150 | PartNumber: LX0150
U.S. Standard License Plate Frame: “12.2”*”6.3” Inches License Plate Frame Fit For All America And Canada License Plate. The Aluminum License Plate Can Be A Well Protected. Note: The License Plate Frame Is Designed For Most Of Situations, According To The Laws In Your State, Please Make Sure Our License Plate Frame Will Not Block Out Any Information Of The License Plate..
Sports Style: As We All Know The Real Carbon Fiber Is Very Expensive, The Plastic License Plate Frame Printed With Carbon Fiber Pattern Is Very Light And Easy To Install, You Can Spend Less Money To Decorate Your Car Whit Carbon Fiber, It Makes Your Car Looks More Sport..
Special Production Process: Our License Plate Frame Uses Water Transfer Printing Technology To Make The Surface Of The Entire License Plate Frame Smoother, The Carbon Fiber Texture Is Not Easy To Fall Off, And It Is More Durable..
Why We Choose Lx License Plate Frame: We Are Professional License Plate Frame Manufacturers, We Make Sure That Every License Plate Frames Were Passed The Qualification Inspection. We Sell Directly Form The Factory Without Any Middleman, The Price Will Be Cheaper And Also We Can Provide Excellent Post-Sales Service..
Features
- Valuable price: Compared with the real carbon fiber license plate frame ,Our plastic carbon fiber license plate frame is much more cheaper, and it has the same effect with the real one. For the carbon fiber lover's, it's a more affordable option.
- Why we choose LX license plate frame: We are professional license plate frame manufacturers, we make sure that every license plate frames were passed the qualification inspection. We sell directly form the factory without any middleman, the price will be cheaper and also we can provide excellent post-sales service.
- U.S. standard license plate frame: 12.2 * 6.3 inches license plate frame fit for all America and Canada license plate. The aluminum license plate can be a well protected. NOTE: the license plate frame is designed for most of situations, According to the laws in your state, please make sure our license plate frame will not block out any information of the license plate.
- Special production process: Our license plate frame uses water transfer printing technology to make the surface of the entire license plate frame smoother, the carbon fiber texture is not easy to fall off, and it is more durable.
- Sports style: AS we all know the real carbon fiber is very expensive, the plastic license plate frame printed with carbon fiber pattern is very light and easy to install, you can spend less money to decorate your car whit carbon fiber, it makes your car looks more sport.
- See more on Amazon...
Brand: OKLPF | Manufacturer: LXCAR
Dimensions: 0.30 x 12.20 x 5.90 inches
See On Amazon #2
Rear License Plate Frame Bracket Holder Mount for 2005-2023 BMW 1/2/ 3/5 / 6/ X Series, 328i 323i 528i M3, 2002-2019 Mini Cooper 51187160607 511882380615 51188238061 Screws
Asin: B0BMFMBJXL | Model: BMW 1 2 3 4 5 6 X Series & Mini | PartNumber: BMW 1 2 3 4 5 6 X Series & Mini
🚗Part Number: 51187160607 511882380615 & 51188238061 License Tag Frame; Compatible With 2002-2019 Mini Cooper S R53, 2005-2021 Bmw E46 E70 E90 E60 M335 528I 330Ci 135I 535D 528Xi 320I 320I Rear License Plate Holder; 2003-2022 Range Rover Discovery Lr Series, 2004-2022 Ford Focus C-Max Edge Expedition.
☎Worry-Free Purchase: The Podestaa Service Team Stands Behind Our Products And Is Committed To Addressing Any Quality Issues. We Strive To Enhance The Shopping Experience For Our Customers And Offer 1 Year Warranty Service. Please Feel Free To Contact Us If You Encounter Any Problems..
🚗Easy Installation: This License Plate Bracket Includes All The Necessary Hardware And Can Be Installed On Many Vehicles Besides Bmw, Making It A Versatile And Convenient Option For Drivers, Of Course,If As Long As You Don't Mind Drilling Two Holes In The Bumper Cover To Install The Bracket.
🚗Fits: 2005-2021 Bmw 1/2/3/4/5/6/X/Z Series, X1 X3 X4 X5 X6 I3 M3 Z4 E90 E91 E92 E93 E36 F30 V X3 E46 F10 E30 330I 328I 320 528I E21 E81 E82 E87 E88 E53 E61 E85 E86 Rear License Plate Bracket.
Features
- License Plate Bracket Made with ABS material, Durable and Weather-Resistant; our Podestaa Licence Plate Bracket is designed to withstand the harshest road and weather conditions, ensuring that your license plate stays securely in place without rust, fade, or crack.
- Fits: 2005-2021 BMW 1/2/3/4/5/6/X/Z Series, X1 X3 X4 X5 X6 I3 M3 Z4 E90 E91 E92 E93 E36 F30 v X3 E46 F10 E30 330i 328i 320 528i E21 E81 E82 E87 E88 E53 E61 E85 E86 Rear license plate bracket
- Part Number: 51187160607 511882380615 & 51188238061 license tag frame; Compatible with 2002-2019 Mini Cooper s R53, 2005-2021 BMW E46 E70 E90 E60 M335 528I 330Ci 135i 535d 528Xi 320i 320i Rear license Plate holder; 2003-2022 Range Rover Discovery LR Series, 2004-2022 Ford Focus C-Max Edge Expedition
- Easy Installation: This license plate bracket includes all the necessary hardware and can be installed on many vehicles besides BMW, making it a versatile and convenient option for drivers, of course,if as long as you don't mind drilling two holes in the bumper cover to install the bracket
- Worry-Free Purchase: The Podestaa service team stands behind our products and is committed to addressing any quality issues. We strive to enhance the shopping experience for our customers and offer 1 year warranty service. Please feel free to contact us if you encounter any problems.
- See more on Amazon...
Brand: Podestaa | Manufacturer: Podestaa
Dimensions: 6.00 x 12.00 x 0.30 inches | Weight: 0.29 pounds
Warranty: 12 Months Warranty
See On Amazon #3
Car Door Edge Guards Door Sill Protector 5D Carbon Fiber Wrap Film Vinyl Automotive Protection Film Anti-Collision Fits for Most Car (2.7In x 33Ft, Black)
Asin: B07WS94LLL | Model: CAR5D01 | PartNumber: CAR5D01 | Ean: 0669825479967 | UPC: 669825479967
Easy Of Installation : Conforms Well To Most Contours Andshapes. Self-Adhesive Air Pocket Release Backing Design So There Are No Bubbles. Multiple Size Selection, Select The Appropriate Size According To The Installation Location..
Advantage : Water Proof And Stain Resistant, Easily Cleansed With Water; Uv Protected; Stretchable With Heat, Can Be Shaped And Molded Over Complex Curves, Can Also Be Used With A Heat Gun Or Household Blow Drier For Shaping; Very Flexible And Stretchable..
Easy To Remove : Easily To Remove Without Residue Without Damaging The Painted Surface Of Your Vehicle..
Multi-Function : Automotive Wrap Vinyl Sheets Can Be Applied To Your Car's Hood, Trunk, Roof, Dashboard, Gauges, Interior, Amplifiers, Mirrors, Cellphones, Laptops, Motorcycle Parts, Metal Parts Etc..
Features
- HIGH QUALITY : Automotive grade premium high quality vinyl designed for wrapping vehicles and many other uses. Textured with a carbon fiber design, 5 dimensional look and feel.
- MULTI-FUNCTION : Automotive Wrap Vinyl Sheets can be applied to your car's hood, trunk, roof, dashboard, gauges, interior, amplifiers, mirrors, cellphones, laptops, motorcycle parts, metal parts etc.
- EASY OF INSTALLATION : Conforms well to most contours andshapes. Self-adhesive air pocket release backing design so there are no bubbles. Multiple size selection, select the appropriate size according to the installation location.
- EASY TO REMOVE : Easily to remove without residue without damaging the painted surface of your vehicle.
- ADVANTAGE : Water proof and stain resistant, easily cleansed with water; UV protected; Stretchable with heat, can be shaped and molded over complex curves, can also be used with a heat gun or household blow drier for shaping; Very flexible and stretchable.
- See more on Amazon...
Brand: DGSL | Manufacturer: DGSL
Dimensions: 0.04 x 5.12 x 4.92 inches | Weight: 0.51 pounds
See On Amazon #4
Aootf Carbon Fiber License Plate Frame- Heavy Duty Black Aluminum Car Tag Cover, Slim Front & Rear Holders Mount Hardware Kit- Screws Bolts, Nut, Tire Valve Caps, Rattle Proof Pad
Asin: B08JV27WX9 | Model: XE-Frame | PartNumber: XE-Frame
Easy To Install- License Plate Mounting Hardware In The Kit, Including License Plate Screw Bolts, Nylon Inserts, Carbon Fiber Screw Caps. M6*20Mm Screws Are Suitable For Plate Mount Of Most Models, And The License Plate Fasteners Can Lock The License Plate Firmly. 4 Machine Bolts And 4 Self-Tapping Screws Are Enough For The 4-Hole License Plate Cover. License Plate Screws With Caps Can Well Decorate The Carbon Fiber Frame, Beautiful And Anti-Theft Effect.
Guarantee: Buy It Now With Confidence, "Aootf License Plate Frames"If The Received License Frame Is Bent And Crushed, Or The Screws Don't Fit Your Model,Any Questions, Unconditional Refund Or Free Replacement.
Rattle Proof License Plate- The Large Black Foam License Plate Pad Is Pasted On The Back Of The License Plate, Which Can Effectively Reduce License Plate Noise And Avoid Scratches And Rust On The Paint. High-Value Car Accessories- 4 Set Valve Stem Caps, Are Made From Aluminum Alloy. Tire Valve Caps Provide An Enhanced Seal To Avoid Leakage And Properly Keep Away From Dust, Dirt, Grime And Road Debris. Designed In General Size, 10*16Mm , Can Be Installed On Many Tires Or Wheel Air Valve Stems.
4 Hole Slim Frame For Usa License Plate- The Black Frames For Front And Rear License Plates Are Designed According To The American Standard License Plate, Suitable For All Universal/Novelty/Customized 12*6 Inch Plates In The United States/Canada.Thin Edge Design , Will Not Cover The Registration Sticker On The Metal License Plate, And Guarantee 100% Legal Street. 2 Pack Frame Suitable For Front Bumper Bracket And Back Trunk License Plate Holder For All Cars, Trailers, Trucks, Suvs, 4Runners.
Features
- Carbon Pattern License Plate Holder- Aluminum car license frame, carbon pattern printed on the surface (NOT REAL CARBON FIBER LICENSE PLATE FRAME). 1.6mm Thick aluminum, Heavy Duty, corrosion-resistant, rust-resistant and weather-resistant, protect the License Plate Rust Proof. 3D Twill weave pattern carbon printing, clear, UV resistant, will not fade, more cost-effective than real carbon holder. Cool car tag frame is suitable for BMW, Mercedes-Benz, Audi, Porsche and other models
- 4 Hole Slim Frame For USA License Plate- The black frames for front and rear license plates are designed according to the American standard license plate, suitable for all Universal/novelty/customized 12*6 inch plates in the United States/Canada.Thin edge design , Will not cover the registration sticker on the metal license plate, and guarantee 100% legal street. 2 pack frame suitable for front bumper bracket and back trunk license plate holder for all cars, trailers, trucks, SUVs, 4runners
- Easy To Install- License Plate Mounting Hardware in the kit, including license plate screw bolts, nylon inserts, carbon fiber screw caps. M6*20mm screws are suitable for plate mount of most models, and the license plate fasteners can lock the license plate firmly. 4 machine bolts and 4 self-tapping screws are enough for the 4-hole license plate cover. License plate screws with caps can well decorate the carbon fiber frame, beautiful and anti-theft effect
- Rattle Proof License Plate- The large black foam License Plate Pad is pasted on the back of the license plate, which can effectively reduce license plate noise and avoid scratches and rust on the paint. High-value car accessories- 4 set Valve Stem Caps, are made from aluminum alloy. Tire valve caps provide an enhanced seal to avoid leakage and properly keep away from dust, dirt, grime and road debris. Designed in general size, 10*16mm , can be installed on many tires or wheel air valve stems
- Guarantee: Buy It Now With Confidence, Aootf License Plate FramesIf the received license frame is bent and crushed, Or the screws don't fit your model,any questions, unconditional refund or free replacement
- See more on Amazon...
Brand: AOOTF | Manufacturer: Aootf
Dimensions: 0.30 x 12.00 x 6.00 inches
See On Amazon #5
2Pcs Rear Bumper Diffuser Spoilers for Cars, Rear Bumper Canard Diffuser Splitter Protector, Universal Rear Bumper Lip Splitter Diffuser Spoiler Kit Exterior Decorations for Car (Black)
Asin: B0C9HK35MD | Model: 1 | PartNumber: 1
[Universal Type]: Universal Rear Bumper Lip Body Kit Rear Side Skirt Valence Spoiler Car Exterior Decorations, Suitable For Most Models, Used For The Rear Bumper, Effectively Prevent The Collision Between The Body..
[What You Will Get]: The Package Includes 2*Lower Bumper Lip Canards Deflector, 6 Screws, Create Precise Corners, The Overall Shape Is More Beautiful, The Arc Is More Smooth, And Will Not Affect The Vehicle Passability..
[Easy To Install]: Clean Where You Need To Install, Install To Your Bumper With Screws (If There Are No Screw Holes To Drill).
[Function]: Our Car Side Fender Skirt Lip Splitter Canard Protector Protects Your Car's Rear Bumper From Collision Damage Or Scratches When Parked, While Giving Your Car A Boost And Showing Off Its Unique Sporty Look..
Features
- [High quality]: This Rear Bumper Canard Diffuser Splitter Protector adopts high-quality ABS material, carbon fiber pattern coating and Black coating, anti-corrosion, anti-rust, waterproof, high temperature resistance, never fade, durable.
- [Function]: Our Car Side Fender Skirt Lip Splitter Canard Protector protects your car's rear bumper from collision damage or scratches when parked, while giving your car a boost and showing off its unique sporty look.
- [Universal type]: Universal Rear Bumper Lip Body Kit Rear Side Skirt Valence Spoiler Car Exterior Decorations, suitable for most models, used for the rear bumper, effectively prevent the collision between the body.
- [Easy to install]: Clean where you need to install, install to your bumper with screws (if there are no screw holes to drill)
- [What you will get]: The package includes 2*lower bumper lip canards deflector, 6 screws, create precise corners, the overall shape is more beautiful, the arc is more smooth, and will not affect the vehicle passability.
- See more on Amazon...
Brand: Jsorum | Manufacturer: Jsorum
Warranty: No Applicable
See On Amazon #6
Universal Car Door Edge Guard Door Sill Protector, Automotive Anti-Collision Strip for Car Door Edge/Front and Rear Bumper/Door Sill Protector, Fits for Most Car, Black (2.7In x 33Ft)
Asin: B07TYTMF3M | Ean: 0695713359431 | UPC: 695713359431
Easy Of Installation : Repositionable During Installation. Conforms Well To Most Contours Andshapes. Self-Adhesive Air Pocket Release Backing Design So There Are No Bubbles..
Advantage : Water Proof And Stain Resistant, Easily Cleansed With Water; Uv Protected; Stretchable With Heat, Can Be Shaped And Molded Over Complex Curves, Can Also Be Used With A Heat Gun Or Household Blow Drier For Shaping; Very Flexible And Stretchable..
Easy To Remove : Easily To Remove Without Residue Without Damaging The Painted Surface Of Your Vehicle..
Multi-Function : Automotive Wrap Vinyl Sheets Can Be Applied To Your Car's Hood, Trunk, Roof, Dashboard, Gauges, Interior, Amplifiers, Mirrors, Cellphones, Laptops, Motorcycle Parts, Metal Parts Etc..
Features
- HIGH QUALITY : Automotive grade premium high quality vinyl designed for wrapping vehicles and many other uses. Textured with a carbon fiber design, 5 dimensional look and feel.
- MULTI-FUNCTION : Automotive Wrap Vinyl Sheets can be applied to your car's hood, trunk, roof, dashboard, gauges, interior, amplifiers, mirrors, cellphones, laptops, motorcycle parts, metal parts etc.
- EASY OF INSTALLATION : Repositionable during installation. Conforms well to most contours andshapes. Self-adhesive air pocket release backing design so there are no bubbles.
- EASY TO REMOVE : Easily to remove without residue without damaging the painted surface of your vehicle.
- ADVANTAGE : Water proof and stain resistant, easily cleansed with water; UV protected; Stretchable with heat, can be shaped and molded over complex curves, can also be used with a heat gun or household blow drier for shaping; Very flexible and stretchable.
- See more on Amazon...
Brand: Storystore | Manufacturer: Storystore
See On Amazon #7
REBEL Case for iPhone 15 Pro Max [Gen-5 Aramid Fiber] Strong MagSafe Compatible, Grippy Sides, Shockproof Corners, Metal Lens + Buttons, Upgraded Protective Design, 6.7 Inch Phone 2023 (Black)
Asin: B0CLBTGWX7 | Model: RSG5-15PM | PartNumber: RSG5-15PM | Ean: 0810142320009 | UPC: 810142320009
Innovative Features. All New Cnc Metal Lens & Buttons Are Color Customizable With Satisfying Clicks & Pvd Ceramic Finished For Wear Resistance. Very Tight & Solid Fit, Your Phone Will Never Slip Out!.
Our Best Glass Screen Protector Included. Ultra Impact Resistant Gen-3 Rebel Glass Screen Protector (0.5Mm, 9H Hardness & 2.75D Edge) + Install Kit Included!.
Compatible With Magsafe, Ultra Strong Hold. Upgraded Magnets Are Stronger Vs Gen-4 Rebel Cases. Best Magnets Used + Grippy Raised Aramid Fiber Sheet For Ultimate Magnet Strength. No More Slipping Mounts & Wallets..
Built For Drop Protection, Real Aramid Fiber. Shockproof Tech Includes Tpe Corner Lining & Full Tpu Exterior Body. Raised Corners On Front/Rear Of Case For Top Drop Protection..
Features
- Upgraded Fully Armored Design, Ultra Grippy Sides: Our most protective case with an incredibly sleek profile. Full TPU shell with super grippy spike texture on sides & improved holding comfort.
- Built For Drop Protection, Real Aramid Fiber. Shockproof tech includes TPE corner lining & full TPU exterior body. Raised corners on front/rear of case for top drop protection.
- Innovative Features. All new CNC metal lens & buttons are color customizable with satisfying clicks & PVD ceramic finished for wear resistance. Very tight & solid fit, your phone will never slip out!
- Compatible with MagSafe, Ultra Strong Hold. Upgraded magnets are stronger vs GEN-4 REBEL cases. Best magnets used + grippy raised aramid fiber sheet for ultimate magnet strength. No more slipping mounts & wallets.
- Our Best Glass Screen Protector Included. Ultra Impact Resistant GEN-3 REBEL Glass Screen Protector (0.5mm, 9H hardness & 2.75D edge) + install kit included!
- See more on Amazon...
Brand: REBEL | Manufacturer: REBEL
Dimensions: 0.48 x 6.50 x 3.23 inches | Weight: 0.12 pounds
See On Amazon #8
Car Door Edge Guards Door Sill Protector, Automotive Anti-Collision Strip for Car Door Edge/Front and Rear Bumper/Door Sill Protector, Fits for Most Car (2.7In x 33Ft)
Asin: B08JYGZ21Y | Ean: 0619856478330 | UPC: 619856478330
Easy Of Installation : Repositionable During Installation. Conforms Well To Most Contours Andshapes. Self-Adhesive Air Pocket Release Backing Design So There Are No Bubbles..
Advantage : Water Proof And Stain Resistant, Easily Cleansed With Water; Uv Protected; Stretchable With Heat, Can Be Shaped And Molded Over Complex Curves, Can Also Be Used With A Heat Gun Or Household Blow Drier For Shaping; Very Flexible And Stretchable..
Easy To Remove : Easily To Remove Without Residue Without Damaging The Painted Surface Of Your Vehicle..
Multi-Function : Automotive Wrap Vinyl Sheets Can Be Applied To Your Car's Hood, Trunk, Roof, Dashboard, Gauges, Interior, Amplifiers, Mirrors, Cellphones, Laptops, Motorcycle Parts, Metal Parts Etc..
Features
- HIGH QUALITY : Automotive grade premium high quality vinyl designed for wrapping vehicles and many other uses. Textured with a carbon fiber design, 5 dimensional look and feel.
- MULTI-FUNCTION : Automotive Wrap Vinyl Sheets can be applied to your car's hood, trunk, roof, dashboard, gauges, interior, amplifiers, mirrors, cellphones, laptops, motorcycle parts, metal parts etc.
- EASY OF INSTALLATION : Repositionable during installation. Conforms well to most contours andshapes. Self-adhesive air pocket release backing design so there are no bubbles.
- EASY TO REMOVE : Easily to remove without residue without damaging the painted surface of your vehicle.
- ADVANTAGE : Water proof and stain resistant, easily cleansed with water; UV protected; Stretchable with heat, can be shaped and molded over complex curves, can also be used with a heat gun or household blow drier for shaping; Very flexible and stretchable.
- See more on Amazon...
Brand: Storystore | Manufacturer: Storystore
Dimensions: 0.04 x 396.00 x 2.70 inches
See On Amazon #9
Ouzorp 10Pcs Air Vortex Generator Carbon Fiber Pattern Diffuser Shark Fin Set Kit Compatible with Spoiler Roof Wing Pointed
Asin: B0B4ZZR7SP | Model: LY-39 | PartNumber: LY-39 | Ean: 0768488691218 | UPC: 768488691218
Uv-Protected & Weatherproof Coating Assures You A More Durable Product. Universal Fit For Most Cars, No Need For Modification Or Trimming..
When You Receive The Goods, If There Are Any Problem, Please Contact Us And Do Not Directly Open The Dispute. We Promise We Will Give You A Satisfied Solution After We Confirmed It. We Also Will Give You A Positive Evaluation..
Use Of Bottom Adhesive Directly Stick ,Need Proper Measurement To Get Them Perfectly Aligned.When Installing, Use A Hair Dryer To Heat It For 1 Minute For Better Viscosity..
Instant Upgrade, Dramatically Improved Styling & Appearance..
Features
- Improves fuel economy. Increases downforce and reduces drag.Increases top speed and performance.
- Instant upgrade, dramatically improved styling & appearance.
- UV-protected & weatherproof coating assures you a more durable product. Universal fit for most cars, no need for modification or trimming.
- Use of bottom adhesive directly stick ,need proper measurement to get them perfectly aligned.When installing, use a hair dryer to heat it for 1 minute for better viscosity.
- When you receive the goods, if there are any problem, please contact us and do not directly open the dispute. We promise we will give you a satisfied solution after we confirmed it. We also will give you a positive evaluation.
- See more on Amazon...
Brand: Ouzorp | Manufacturer: Ouzorp
Warranty: 1 YEAR
See On Amazon #10
Automotive Door Entry Guard Reflective Car Door Sill Protector 16.4 Feet Car Scratch Protector Film Car Paint Protector Black Door Edge Protector for Most Cars Vehicles Accessories (2.8 Inch Wide)
Asin: B09JNVP7C5 | Model: 3264 | PartNumber: 3264
Non-Slip Texture: This Car Door Scratch Protector Adopts Rough Grains On The Surface, And Features A Adhesive Backing; The Textured Surface And Nice Adhesion Can Make It Stay In Place And Avoid Slips When Getting In And Out, Giving You A Satisfactory Using Experience.
Wide Range Of Applications: The Car Door Edge Protector Can Protect The Inner Sill From Chips, Scratches, And Scuffs When You Enter Or Exit The Vehicle, Is Suitable For The Car's Hood, Trunk, Roof, Dashboard, Gauges, Interior, Amplifiers, Mirrors, Rear Bumpers, Laptops, Motorcycle Parts, Luggage, Boots, Trucks, Motorcycles And So On.
Simple Installation: Before Use, Please Clean Up The Position That Needs To Be Protected, Making The Area Neat And Tidy; And Press It Hard For 60S, Please Do Not Touch It With Water Within 24 Hours, Otherwise The Effect Will Be Bad; Paste It To Your Desired Place, Very Easy And Convenient; It's Also Simple To Remove, No Need To Worry About Leaving Residue On The Painted Surface Of Your Vehicle Too Much.
Reliable To Use: The Vehicle Door Guard Is Made Of Quality Peva Material With Adhesive On The Back, Not Easy To Break Or Tear, Can Be Easily Cut And Deformed To Cover The Existing Scratches, And Protect Your Paint And Stand Up To Shoes, Boots, And Other Footwear, Wet Weather, And Long-Term Wear.
Features
- Nice car accessory: there is 1 roll of car door edge guard in the package, which measures about 7 cm/ 2.8 inches in width, 5 m/ 16.4 feet in length, sufficient supply to meet your needs for daily usage and replacement, and you can also share it with your friends and family members
- Reliable to use: the vehicle door guard is made of quality PEVA material with adhesive on the back, not easy to break or tear, can be easily cut and deformed to cover the existing scratches, and protect your paint and stand up to shoes, boots, and other footwear, wet weather, and long-term wear
- Non-slip texture: this car door scratch protector adopts rough grains on the surface, and features a adhesive backing; The textured surface and nice adhesion can make it stay in place and avoid slips when getting in and out, giving you a satisfactory using experience
- Simple installation: Before use, please clean up the position that needs to be protected, making the area neat and tidy; And press it hard for 60s, please do not touch it with water within 24 hours, otherwise the effect will be bad; Paste it to your desired place, very easy and convenient; It's also simple to remove, no need to worry about leaving residue on the painted surface of your vehicle too much
- Wide range of applications: the car door edge protector can protect the inner sill from chips, scratches, and scuffs when you enter or exit the vehicle, is suitable for the car's hood, trunk, roof, dashboard, gauges, interior, amplifiers, mirrors, rear bumpers, laptops, motorcycle parts, luggage, boots, trucks, motorcycles and so on
- See more on Amazon...
Brand: Frienda | Manufacturer: Frienda
Dimensions: 2.76 x 4.72 x 4.72 inches | Weight: 0.07 pounds
Warranty: 365days
See On Amazon #11
Car Rear Spoiler Roof Lip Kit, Carbon Fiber 3D Rubber Trunk Spoiler Trim Strip Cool Car Decoration, Universal Punch-Free Vehicle Exterior Accessory Sticker (Carbon Fiber Black)
Asin: B0CN8Q98CZ | Model: Car Rear Spoiler Roof Lip Kit | PartNumber: Car Rear Spoiler Roof Lip Kit
【Comprehensive Body Protection】:This Spoiler Wing Can Protect Multiple Parts Of Your Car, Such As Front And Rear Bumpers, Front And Rear Lips, Side Skirts, And Tailgate, Keeping Your Car Safe From Scratches And Collisions.It Can Be Bent Freely, Adjustable According To The Curvature, Free Fit And High Fit..
【Non Punching Installation】:The Roof Spoiler Is Fixed With A Strong Adhesive Bottom. ①Measure The Length Required For Installation And Cut Off The Excess. ② Wipe The Car Adhesion Area Clean. ③Remove The Protective Film From The Double-Sided Adhesive Tape. Use A Hot Air Blower To Slightly Heat The Double-Sided Adhesive Tape To Make It Stick Tighter..
【Wide Applications】:A Car Rubber Spoiler Can Be Installed On The Trunk, Root Wing, Or Hood Of Your Car, Adding A Stylish And Streamlined Appearance. It Not Only Decorates Your Car But Also Improves Driving Stability, Fuel Efficiency, And Ride Quality. The Linear Design Enhances The Performance Of Your Car's Engine And Maximizes Its Overall Performance..
【High Quality Material】:The Rear Spoiler Is Made Of High-Quality Rubber With A Smooth And Shiny Surface That Is Smooth And Glossy In The Sun. It Has Excellent Flexibility While Maintaining A Degree Of Hardness For Reliability And Durability..
Features
- Dimensions :57.75 inches long and 1.45 inches wide. GM Rubber Spoiler is very flexible and cuttable, it fits perfectly in any car trunk or roof. Fits any car, truck, SUV.
- High Quality Material :The rear spoiler is made of high-quality rubber with a smooth and shiny surface that is smooth and glossy in the sun. It has excellent flexibility while maintaining a degree of hardness for reliability and durability.
- Comprehensive Body Protection :This spoiler wing can protect multiple parts of your car, such as front and rear bumpers, front and rear lips, side skirts, and tailgate, keeping your car safe from scratches and collisions.It can be bent freely, adjustable according to the curvature, free fit and high fit.
- Wide Applications :A car rubber spoiler can be installed on the trunk, root wing, or hood of your car, adding a stylish and streamlined appearance. It not only decorates your car but also improves driving stability, fuel efficiency, and ride quality. The linear design enhances the performance of your car's engine and maximizes its overall performance.
- Non Punching Installation :The roof spoiler is fixed with a strong adhesive bottom. Measure the length required for installation and cut off the excess. Wipe the car adhesion area clean. Remove the protective film from the double-sided adhesive tape. Use a hot air blower to slightly heat the double-sided adhesive tape to make it stick tighter.
- See more on Amazon...
Brand: JOYCOURT | Manufacturer: JOYCOURT
Dimensions: 1.61 x 10.62 x 1.45 inches
Warranty: 0.2
See On Amazon #12
Car Door Edge Entry Guards, 5D Carbon Fiber Anti-Collision Waterproof Protector Tape, Scratch Cover Strip Sticker for Car Door Sill Rear Bumper, Automotive Exterior Accessories for Most Cars
Asin: B0BKK91XJ9 | Model: Car Door Edge Guard | PartNumber: Car Door Edge Guard
【Multiple Functions】: This Car Door Edge Entry Guard Not Only Protect Your Car From Scratch And Water, It Also Prevent Paint Chips And Rust, Keep The Car Clean And Reduce Noise. It Also Suitable For Motorcycles, Laptops Or Domestic Objects, Such As Furniture Or Windows. You Could Cut Them In Any Shape Or Size, And Stick Them In Anywhere You Like, It Can Do What You Want To Do With It..
【Universal Fit】: We Have Two Sizes For You To Choose, 1.97"X393.7" And 2.76"X393.7". Suitable For Various Models Such As Sedan, Suv And Mvp. There Are Two Colors, Black Carbon Fiber Texture And Transparent. The Black One Gives A Great Carbon Like Look, Your Car Will Looks More Stylish And Fashion. It Is A Good Exterior Decoration And A Great Gift Choice For Your Family And Friends..
【Easy Installation】: This Door Edge Entry Guard Is Easy To Install, Before Installation, Please Clean The Surface First To Ensure Stickiness. Then You Should Measure The Size And Cut It To Fit The Shape And Size. Peel Off The Tape Protective Film. Finally, Stick It On The Vehicle Surface. It Only Takes A Few Minutes To Complete The Installation..
【Anti-Collision】: You Can Install This Scratch Cover Strip Sticker On The Inner Sill, Outer Sill, Rear Skid Plate, Outside Of The Door, Inside The Door, Rear View Mirror, Bumper Or Anywherer Around Your Vehicle. When It Is Installed Outside The Car, It Prevent Collision And Scratches, When It Is Installed Inside, It Prevent The Kicking From Children. It Will Provide Full Protection For Your Car At All Times..
Features
- High Quality : Our car door scratch protector is made of high quality PVC material with 5D carbon nanofibers texture which can use for a long time. It can withstand high temperatures and cold weather. It is waterproof, abrasion resistant and protect your car from bright light. It can be tightly glued to the surface of the object, prevent your car form scratch.
- Anti-Collision : You can install this scratch cover strip sticker on the inner sill, outer sill, rear skid plate, outside of the door, inside the door, rear view mirror, bumper or anywherer around your vehicle. When it is installed outside the car, it prevent collision and scratches, when it is installed inside, it prevent the kicking from children. It will provide full protection for your car at all times.
- Multiple Functions : This car door edge entry guard not only protect your car from scratch and water, it also prevent paint chips and rust, keep the car clean and reduce noise. It also suitable for motorcycles, laptops or domestic objects, such as furniture or windows. You could cut them in any shape or size, and stick them in anywhere you like, it can do what you want to do with it.
- Easy Installation : This door edge entry guard is easy to install, before installation, please clean the surface first to ensure stickiness. Then you should measure the size and cut it to fit the shape and size. Peel off the tape protective film. Finally, stick it on the vehicle surface. It only takes a few minutes to complete the installation.
- Universal Fit : We have two sizes for you to choose, 1.97x393.7 and 2.76x393.7. Suitable for various models such as sedan, SUV and MVP. There are two colors, black carbon fiber texture and transparent. The black one gives a great carbon like look, your car will looks more stylish and fashion. It is a good exterior decoration and a great gift choice for your family and friends.
- See more on Amazon...
Brand: Moly Magnolia | Manufacturer: Moly Magnolia
Dimensions: 2.00 x 7.00 x 2.00 inches
See On Amazon #13
RULLINE 10pcs/Set Diffuser Shark Fin Kit Compatible with Spoiler Roof Wing Air Vortex Generator Carbon Fiber Pattern
Asin: B01N7HMO4E | Ean: 0842411127712 | UPC: 842411127712
★[ Drag Reduction ]—— Reduce Air Resistance And Air Noise, Improve The Stability Of The Vehicle During Fast Driving..
★[ Easy To Install ]—— Use Of Bottom Adhesive Directly Stick ,Need Proper Measurement To Get Them Perfectly Aligned.
★[ Universal ]—— Universal Fit For Most Cars, No Need For Modification Or Trimming..
★[ Strong Adhesive ]—— Strong Self Adhesive To The Car, Sturdy And Not Easy To Fall Off, Stayed Adhered Through Harsh Condition..
Features
- [ Car Decoration ] Fashionable EVO style, smooth and shinny surface give your car aggressive look and makes it stand out
- [ Strong Adhesive ] Strong self adhesive to the car, sturdy and not easy to fall off, stayed adhered through harsh condition.
- [ Drag Reduction ] Reduce air resistance and air noise, improve the stability of the vehicle during fast driving.
- [ Universal ] Universal fit for most cars, no need for modification or trimming.
- [ Easy To Install ] Use of bottom adhesive directly stick ,need proper measurement to get them perfectly aligned
- See more on Amazon...
Brand: RULLINE | Manufacturer: RULLINE
Dimensions: 3.15 x 5.12 x 3.15 inches | Weight: 0.18 pounds
Warranty: 90 day
See On Amazon #14
BIEAR Bidet Attachment For Toilet, Ultra-Slim Dual Nozzle Bidet Attachment Adjustable Water Pressure Non-Electric Fresh Cold Water Bidet Toilet Seat Attachment for Feminine and Posterior Wash
Asin: B09Y53J9Y3 | Model: HY-B | PartNumber: HY-B | Ean: 0747301035057 | UPC: 747301035057
【Adjustable Water Pressure】: You Can Adjust The Water Pressure By Twisting The Rotary Controller Of The Bidet Toilet According To The Rotation Angle You Twist. The Larger Angle You Twist, The Larger The Water Pressure You Get. It Is An Ideal Spray Controller For Those Who Are Inconvenient To Make A Big Move, Such As Pregnant, The Elders, Constipated People, Or Overweight People. All You Need To Do Is Choose Your Preferred Water Pressure And Start Cleaning! More Flexible Use On Your Family..
【10Mins Easy To Install】: Turn Off The Inlet Flush The Toilet To Drain The Tank, Unscrew The Line From The Tank, Put In The Coupler, And Hook Everything Up. It May Take About 10 Minutes And You Can Use It Forever. Biear Bidet Comes With A Self-Cleaning Function, You Can Clean The Spray By Twisting The Knob At A Little Angle. And The Automatic Rebound Function Would Spring Upward Return Of The Way When Not In Use. Save Your Money On Toilet Paper And Keep Personal Hygiene!.
【High-Quality Component】: Biear Non-Electric Bidet Attachment Is Built With High-Impact Abs Resin Material And Durable Brass Parts, This Bidet Attachment For The Toilet Can Load Weight Up To 360 Pounds And Serve You And Your Family For A Long Time. Comes With A T-Adapter, Brass Water Inlet And Stainless Steel Flexible Hose, Which Can Help You Fit The Bidet Seat More Compatible And With No Leakage. Withstand High Pressure And Leakproof, Make It Serve You For A Long Time!.
【Dual Nozzle Cleaning Modes】: We Care About People's Hygiene And Have 2 Separate Nozzles For Him And Her, A Feminine Nozzle And Posterior Wash. The Feminine Wash, Which Is Designed For Women's Usage, Would Be Softer Than The Posterior Wash. Biear Carbon Fiber Bidet Also Adapts A Simple Rotary Switch Instead Of A Complex Button Plate, Which Is Humane And Easier To Operate For The Elderly And Children. Just Twist Right Or Left And It Offers A Refreshing Stream For Thorough Cleaning..
Features
- Ultra-Slim & Non-Tube Design : The thickness of BIEAR bidet attachment for the toilet is 0.24 inches, which fits almost 90% of standard toilet seats and the edge can completely fit with the toilet. So you don't need to worry that it would not leave a big unsightly gap between the seat. And we innovatively make a non-tube design, so you don't need to worry about any water-blocking caused by the water tubes being squeezed.
- Dual Nozzle Cleaning Modes : We care about people's hygiene and have 2 separate nozzles for him and her, a feminine nozzle and posterior wash. The feminine wash, which is designed for women's usage, would be softer than the posterior wash. BIEAR carbon fiber bidet also adapts a simple rotary switch instead of a complex button plate, which is humane and easier to operate for the elderly and children. Just twist right or left and it offers a refreshing stream for thorough cleaning.
- Adjustable Water Pressure : You can adjust the water pressure by twisting the rotary controller of the bidet toilet according to the rotation angle you twist. The larger angle you twist, the larger the water pressure you get. It is an ideal spray controller for those who are inconvenient to make a big move, such as pregnant, the elders, constipated people, or overweight people. All you need to do is choose your preferred water pressure and start cleaning! More flexible use on your family.
- High-Quality Component : BIEAR non-electric bidet attachment is built with high-impact ABS resin material and durable brass parts, this bidet attachment for the toilet can load weight up to 360 pounds and serve you and your family for a long time. Comes with a T-adapter, brass water inlet and stainless steel flexible hose, which can help you fit the bidet seat more compatible and with no leakage. Withstand high pressure and leakproof, make it serve you for a long time!
- 10mins Easy to Install : Turn off the inlet flush the toilet to drain the tank, unscrew the line from the tank, put in the coupler, and hook everything up. It may take about 10 minutes and you can use it forever. BIEAR bidet comes with a self-cleaning function, you can clean the spray by twisting the knob at a little angle. And the automatic rebound function would spring upward return of the way when not in use. Save your money on toilet paper and keep personal hygiene!
- See more on Amazon...
Brand: BIEAR | Manufacturer: BIEAR
Dimensions: 1.00 x 0.98 x 1.00 inches
See On Amazon #15
Front Lip ,HengJia Auto Parts 2.5m/8.2ft Car carbon fiber front lip,Front Bumper Lip ,Carbon Lip ,Side Skirt, front lip spoiler 100% waterproof protection(Carbon black)
Asin: B071S4CK8N | Model: 10 | PartNumber: 10 | Ean: 0736561476366, 0781930566988 | UPC: 736561476366, 781930566988
Made Of Durable And Sturdy Rubber.Smooth And Delicate Cross-Section,Prevent Scratches.Flexible In Use,Easy To Bend,Have Excellent Wear Resistance.Bumper Lip Completely Fit With Your Bumper Design..
Carbon Fiber Front Lip Energy Give Your Car An Aggressive , It Prevents Nasty Collision Scratches And Provides Protection Get An Aggressive And Lowered Look---- Make Your Car Looks More Sporty!（One Month Warranty,Case Of Damage Or Other Reasons,Please E-Mail Contact Us, We Will Respond Within 12 Hours Can Do For You And Arrange. Thank You Very Much For Your Order!）.
Easy To Install: Clean The Installation Location, And Then Apply The Adhesion And Squeeze. The Installation Of The Corner Of The Bumper Needs To Cut Out A Few Triangles To Fit The Original Car. The Product Pictures Have Installation Drawings For Reference. The Car Will Fluctuate During Driving. We Recommend Using Self-Tapping Screws For Reinforcement So As Not To Fall Off. Equipped With Screws To Achieve Better Adhesion And Fixation..
Specification:Long 250Cm*Wide 5.5Cm/98.4 Inch*2.16Inch.Quality 3M Automotive Tape Will Not Be Affected By Wet Or Cold Weather.D.I.Y Car Front Lip Fearturing In Curved Design, Slim, Can Be Stick On Front Or Rear Bumper, Body Kit, Side Skirt,Universal For Most Cars..
Features
- Carbon lip function:To provide an elegant and personalized appearance,Front bumper guard anti-collision protective,protect from scrapes from driveways,speed bumps and curbs.protect cars from collision and alleviate the damage.
- Specification:long 250cm*wide 5.5cm/98.4 inch*2.16inch.Quality 3M automotive tape will not be affected by wet or cold weather.D.I.Y Car Front Lip fearturing in curved design, slim, Can be stick on front or rear bumper, body kit, side skirt,universal for most cars.
- Made of durable and sturdy rubber.smooth and delicate cross-section,prevent scratches.flexible in use,Easy to bend,Have Excellent wear resistance.Bumper Lip completely fit with your bumper design.
- Easy to install: Clean the installation location, and then apply the adhesion and squeeze. The installation of the corner of the bumper needs to cut out a few triangles to fit the original car. The product pictures have installation drawings for reference. The car will fluctuate during driving. We recommend using self-tapping screws for reinforcement so as not to fall off. Equipped with screws to achieve better adhesion and fixation.
- carbon fiber front lip energy Give your car an aggressive , It prevents nasty collision scratches and provides protection Get an aggressive and lowered look---- make your car looks more sporty! One month warranty,case of damage or other reasons,please E-mail contact us, we will respond within 12 hours can do for you and arrange. Thank you very much for your order!
- See more on Amazon...
Brand: HENGJIA | Manufacturer: HengJia Auto Parts
Weight: 1.72 pounds
Warranty: 30 day
See On Amazon #16
HOUCLEMIC Rear Trunk Bumper Protector for Grand Highlander 2024 Accessories, Carbon Fiber Pattern 2 PCs Trunk Door Sill Protector for Grand Highlander
Asin: B0CTG4W9X5 | Model: CXHW2023G0008H-parent | PartNumber: CXHW2023G0008H-parent
【Superior Quality Material】The Advanced Abs Material, Enriched With A Three Dimensional Carbon Fiber Pattern, Makes Our Trunk Guard Not Only Scratch And Wear-Resistant But Also Adds A Touch Of Luxury. This Premium Blend Is Specifically Chosen For 2024 Grand Highlander Accessories, Promising Durability Without Compromising On Style..
【Easy Maintenance】Featuring Waterproof Materials, Our Trunk Guard For 2024 Grand Highlander Is Remarkably Easy To Clean. A Simple Wipe Is All It Takes To Maintain Its Pristine Appearance, Making Upkeep Effortless. This Convenience Ensures Your Car For Toyota Grand Highlander Looks As Good As New With Minimal Effort, Enhancing Your Overall Driving Experience..
【Enhanced Durability】Designed To Resist Collisions And Everyday Scratches, Our Bumper Scrape Guard And Rear Trunk Bumper Protector Extend Beyond Conventional Protection For Toyota Grand Highlander. Their Extended Coverage Ensures The Car Remains Unscathed Under Various Conditions, Offering Both Functionality And Visual Appeal..
【Robust Protection】The Bumper Scrape Guard Is Crafted With Resilience In Mind, Our Rear Trunk Bumper Protector And Door Sill Protector Are Engineered To Withstand Impacts, Offering Extensive Coverage. They Safeguard For Toyota Grand Highlander Against Daily Wear And Tears, Ensuring Your Vehicle Remains In Top Condition..
Features
- Custom Fit Our rear bumper guard is exclusively designed for Toyota Grand Highlander, ensuring a perfect match with the vehicle's original aesthetics. This trunk bumper protector guard integrates flawlessly, preserving the functionality and elegance of your vehicle without interference.
- Robust Protection The bumper scrape guard is crafted with resilience in mind, our rear trunk bumper protector and door sill protector are engineered to withstand impacts, offering extensive coverage. They safeguard for Toyota Grand Highlander against daily wear and tears, ensuring your vehicle remains in top condition.
- Superior Quality Material The advanced ABS material, enriched with a three dimensional carbon fiber pattern, makes our Trunk Guard not only scratch and wear-resistant but also adds a touch of luxury. This premium blend is specifically chosen for 2024 Grand Highlander accessories, promising durability without compromising on style.
- Enhanced Durability Designed to resist collisions and everyday scratches, our bumper scrape guard and rear trunk bumper protector extend beyond conventional protection for Toyota Grand Highlander. Their extended coverage ensures the car remains unscathed under various conditions, offering both functionality and visual appeal.
- Easy Maintenance Featuring waterproof materials, our trunk guard for 2024 Grand Highlander is remarkably easy to clean. A simple wipe is all it takes to maintain its pristine appearance, making upkeep effortless. This convenience ensures your car for Toyota Grand Highlander looks as good as new with minimal effort, enhancing your overall driving experience.
- See more on Amazon...
Brand: HOUCLEMIC | Manufacturer: Houclemic
Dimensions: 2.76 x 23.35 x 4.53 inches
Warranty: 2 Year Warranty
See On Amazon #17
Moioee Car Rear Bumper Protector Guard, Carbon Fiber Anti-Scratch Trunk Door Sill Protection Strip, Self-Adhesive Vehicle Rear Bumper Door Entry Trim Cover, Universal for Pickup SUV Trunk (40.94")
Asin: B0BVT9WM7F | Model: Rear Bumper Protector | PartNumber: Rear Bumper Protector
【Multi-Function】: These Trunk Door Sill Guards Are Multi-Functional, They Are Decorative, Scratch And Impact Resistant. Carbon Fiber Car Door Sill Stickers Provide Protection From Severe Scratches While Also Helping You Cover Existing Scratches, Prevent Car Wear And Tear, Paint Scratches, Paint Damage And Other Conditions..
【Wide Compatible】: These Universal Carbon Fiber Grain Trunk Door Sill Protectors Come In Two Sizes, The Short One Measures 35.4 X 2.95 Inches And The Long One Measures 40.9 X 3.35 Inches, They Are Universally Applicable To Most Trucks, Pickups Or Suvs, You Just Need To Find The Corresponding Size To Buy According To Your Needs..
【Easy To Install & Remove】: These Carbon Fiber Grain Car Door Sill Protection Strips Are Very Easy To Install And Remove, Easy To Install, The Protection Strips Are Tough And Can Be Freely Deformed And Cut Freely, You Can Cut And Splice Them According To Your Needs, Then Just Stick Them On Where You Want To Install Them, They Don't Hurt The Car Paint..
【Adequate Protection】: These Carbon Fiber Pattern Protection Stickers Can Provide You With Maximum Effective Protection, And Protect Your Car From Scratches, Reduce The Trunk Guard Is Scraped And Scratched Because Of Heavy Lifting And Other Activities, No Longer Have To Worry About Unintentionally Causing Harm To Your Favorite Car Repeatedly..
Features
- Great Material : These trunk door sills are made of high-quality environmentally friendly carbon fiber grain material, beautiful and generous, wear-resistant and anti-scratch, can effectively reduce the external impact, anti-scratch and anti-scratch, resilient, anti-aging, anti-UV, carbon fiber grain protection sticker can enhance the class of your favorite car.
- Adequate Protection : These carbon fiber pattern protection stickers can provide you with maximum effective protection, and protect your car from scratches, reduce the trunk guard is scraped and scratched because of heavy lifting and other activities, no longer have to worry about unintentionally causing harm to your favorite car repeatedly.
- Multi-Function : These trunk door sill guards are multi-functional, they are decorative, scratch and impact resistant. Carbon fiber car door sill stickers provide protection from severe scratches while also helping you cover existing scratches, prevent car wear and tear, paint scratches, paint damage and other conditions.
- Easy to Install & Remove : These carbon fiber grain car door sill protection strips are very easy to install and remove, easy to install, the protection strips are tough and can be freely deformed and cut freely, you can cut and splice them according to your needs, then just stick them on where you want to install them, they don't hurt the car paint.
- Wide Compatible : These universal carbon fiber grain trunk door sill protectors come in two sizes, the short one measures 35.4 x 2.95 inches and the long one measures 40.9 x 3.35 inches, they are universally applicable to most trucks, pickups or SUVs, you just need to find the corresponding size to buy according to your needs.
- See more on Amazon...
Brand: Moioee | Manufacturer: Moioee
Dimensions: 0.80 x 1.30 x 0.80 inches
Warranty: 0.2
See On Amazon #18
Aootf License Plate Frames Carbon Fiber- 2 Pack Black Aluminum Metal License Plate Holders Printing Carbon Fiber Pattern, 2 Hole License Plate Frame Kits, Fine Size Plate Frames for Women & Men
Asin: B06XYSSXYX | Model: CPT-001 | PartNumber: CPT-001 | Ean: 6905208763303
Easy To Install:The License Plate Frame With Mounting Hardware, Easy To Install. Back Buckle Design,Your Plate Be Able To Slide In And Not Have To Touch The Rear Of Your Vehicle. All Screws And Plastic Anti-Theft Screw Cap, No Need To Purchase Accessories.You Can Install Quickly And Efficiently..
Paint Protection: Exclusive Supply Of 8 Large-Size Thick Rubber Self-Adhesive Pad, The Installation Will Not Scratch The Body Paint, Driving Without Any Sound. License Plate Frame Set Kit Includes License Plate Screws, Security Card Screw Cap, Shock Pad, Installation Instructions, You Can Quickly Install..
Thin But Strong License Plate Holders: Slim Frame Will Not Block Any State Name, Number, The Registration Sticker. Big Thickness, More Solid, Than Stainless Steel License Plate Frame And Chrome License Plate Frame. Protection Plate. Metal Frame Printed Carbon Fiber Pattern(Not Really Carbon Fiber), Not Plastic Plate Frame Will Break. Multi-Layer Protection Treatment, Ultrasonic Rust-Proof Process, Never Rust. High Gloss Clear Resin Layer, Waterproof Sunscreen, Do Not Fade.
Features
- Heavy Duty License Plate Frame :2 Pack carbon fiber black license plate frame made of aluminum metal plate frame surface printing carbon fiber pattern, completely replace the REAL carbon fiber license plate frame, value of the price! Compatible with front license plate frame or rear installation. license plate frame for women, men the best-personalized custom plate frame gift, let your car HONORABLE STATUS, bling, glitter!
- Thin But Strong License Plate Holders: Slim frame will not block any State Name, number, the registration sticker. Big thickness, more solid, than stainless steel license plate frame and chrome license plate frame. Protection plate. Metal frame printed carbon fiber pattern(NOT REALLY CARBON FIBER), not plastic plate frame will break. Multi-layer protection treatment, ultrasonic rust-proof process, never rust. High Gloss Clear resin layer, waterproof sunscreen, do not fade
- Easy To Install:The license plate frame with mounting hardware, easy to install. Back buckle design,Your plate be able to slide in and not have to touch the rear of your vehicle. All screws and plastic anti-theft screw cap, no need to purchase accessories.you can install quickly and efficiently.
- Paint Protection: Exclusive supply of 8 large-size thick rubber self-adhesive pad, the installation will not scratch the body paint, driving without any sound. license plate frame set kit includes license plate screws, security card screw cap, shock pad, installation instructions, you can quickly install.
- See more on Amazon...
Brand: AOOTF | Manufacturer: Aootf
Dimensions: 0.50 x 12.20 x 6.00 inches | Weight: 0.24 Pounds
Warranty: Our carbon fiber patterned 4-hole license plate frame with a 1-year warranty; Any questions, contact us.Will give you the latest license frame replacement.
See On Amazon #19
Mega Racer Carbon Fiber Pattern Metal License Plate Frame 1 Pack - 2 Hole Slim Front or Rear Black Aluminum Frames with Stainless Steel Plate Screws and Black Plastic Caps
Asin: B074J5L91Y | Ean: 0706199251536 | UPC: 706199251536
✔️ Easy Install - Simply Take Off Your Old Car Plate Frame And Install Your New License Plate Frame With Screws. Comes Equipped With Carbon Fiber Front Or Rear License Plate Holder, Anti Theft License Plate Screws Kit And Matching Screw Cap Covers..
😀 Customer Service- Mega Racer's 1 Pc Carbon Fiber Printed Custom License Plate Frame Will Leave Both You And Your Ride Satisfied. If You Have Any Questions Please Send Us A Message Via Amazon Message And We Will Be Sure To Respond Within 24 Hours..
✔️ U.S. And Canada License Plates - Measuring At 6-3/8" X 12-1/4" Exterior, Our License Plate Cover Carbon Fiber Pattern Has Multi-Layer Protection And Is Waterproof. It Will Fit Most U.S. And Canada Car License Plate Frames With Standard Plates..
✔️ Strong, Durable Quality - Our 1 Pc License Plate Holder Is Made Strong To Uphold Anything From Car Washes To Weather Changes. Mega Racer's Carbon Fiber Printed Plate Is Rattle Proof And Rust Resistant Keeping Your Vehicle's Paint Scratch Free..
Features
- FEATURES - Mega Racer's Black Aluminum Carbon Fiber Pattern License Plate Frames for Cars is a slim license plate frame but nevertheless, mighty strong. This sleek style ensures that the state name and registration stickers are not blocked.
- STRONG, DURABLE QUALITY - Our 1 pc License Plate Holder is made strong to uphold anything from car washes to weather changes. Mega Racer's Carbon Fiber Printed plate is RATTLE PROOF and RUST RESISTANT keeping your vehicle's paint SCRATCH FREE.
- EASY INSTALL - Simply take off your old car plate frame and install your new license plate frame with screws. Comes equipped with carbon fiber front or rear license plate holder, anti theft license plate screws kit and matching screw cap covers.
- U.S. AND CANADA LICENSE PLATES - Measuring at 6-3/8 x 12-1/4 Exterior, our License Plate Cover Carbon Fiber Pattern has MULTI-LAYER PROTECTION and is WATERPROOF. It will fit most U.S. AND CANADA car license plate frames with standard plates.
- CUSTOMER SERVICE- Mega Racer's 1 pc Carbon Fiber Printed Custom License Plate Frame will leave both you and your ride satisfied. If you have any questions please send us a message via Amazon Message and we will be sure to respond within 24 hours.
- See more on Amazon...
Brand: Mega Racer | Manufacturer: Mega Racer
Dimensions: 0.01 x 12.00 x 8.00 inches | Weight: 0.35 pounds
See On Amazon #20
Universal Carbon Fiber Pattern Side Skirts Anti-Scratch.Rubber Anti-Scratch Side Skirts Edge Guards.Protector for Sedans, Truck, SUV,Rubber Bumper Protector 10CMx4M(Carbon Fiber Pattern)
Asin: B096XHHRW7 | Model: FZ-CQ-004 | PartNumber: FZ-CQ-004 | Ean: 0798323786397 | UPC: 798323786397
【Perfect Protection】 The Car Universal Rubber Side Skirts Are Flexible To Install And Avoid The Car To Wear And Tear, Scratches Paint Scratches, Collision. Heat And Cold Resistance And Waterproof. Cover The Scratch, Cover The Dent..
【Size Reference】The Product Length Is 13.12Ft. The Length Of One Side Skirts Of Most Cars Is No More Than 6.56Ft.Recommend Measuring The Length Of The Side Skirts Of The Car..
【Scope Of Application】 The Car Bumper Guard Protector Is Suitable For General Vehicles, Such As Suvs, Trucks, And Pickups. Before Ordering, Please Carefully Check The Size Of The Product (10Cm*4M)..
【Easy To Install】 Avoid Sticking To Exposed Environments, Wipe The Car In Advance And Keep It Dry, Otherwise It Will Fall Off Easily. Do Not Wash And Wipe The Car Within 48 Hours After Installing. Otherwise, It Will Fall Easily. You Can Stick The Side Bumper Guards On Any Place Of Your Car Like The Front Bumper, Rear Bumper, Door Guard..
Features
- High-quality rubber material The car Universal Rubber Side Skirts is made of high- quality rubber and is attached with a strong adhesive. Please clean the surface before use, press for a few minutes after heating, which can effectively extend the service life.
- Easy to install Avoid sticking to exposed environments, wipe the car in advance and keep it dry, otherwise it will fall off easily. Do not wash and wipe the car within 48 hours after installing. Otherwise, it will fall easily. You can stick the side bumper guards on any place of your car like the front bumper, rear bumper, door guard.
- Perfect protection The car Universal Rubber Side Skirts are flexible to install and avoid the car to wear and tear, scratches paint scratches, collision. Heat and cold resistance and waterproof. Cover the scratch, cover the dent.
- Scope of application The car bumper guard protector is suitable for general vehicles, such as suvs, trucks, and pickups. Before ordering, please carefully check the size of the product (10CM*4M).
- size reference the product length is 13.12ft. The length of one side skirts of most cars is no more than 6.56ft.recommend measuring the length of the side skirts of the car.
- See more on Amazon...
Brand: muekzru | Manufacturer: MUEKZRU
Dimensions: 0.08 x 157.40 x 3.90 inches
See On Amazon
Looking For Something Else?
Search