Aluminum Outboard Motor Control Arm Throttle Handle for 30hp 2 Stroke, Ergonomic Design, Precise Control
Asin: B0D2V9JKWY | Model: VGEBY0rn6xustez | PartNumber: VGEBY0rn6xustez
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Brand: VGEBY
See On Amazon Similar To Aluminum Outboard Motor Control Arm
#1
T-H Marine Motor Stik OutBoard Motor Support Stick Pair
Asin: B001F0IJQ6 | Model: 3003.6276 | PartNumber: 3003.6276 | Ean: 0733572067750 | UPC: 733572067750
Fits Most Outboards Of 150 Hp And Up And Can Be Used In Salt Or Fresh Water.
Note: Not Compatible With 2024 Mercury Outboards.
Note: Some Yamaha Motors Have A Grease Fitting On The Port Side Ram. Use A Single Motor Stik On The Starboard Side Only In This Application.
Fits Over Existing Trim Rams.
Features
- Supports your outboard while trailering by easing the pressure from your hydraulic system
- Fits over existing trim rams
- Fits most outboards of 150 HP and up and can be used in salt or fresh water
- NOTE: Some Yamaha motors have a grease fitting on the port side ram. Use a single Motor Stik on the starboard side only in this application
- NOTE: Not compatible with 2024 Mercury outboards
- See more on Amazon...
First Available: 06/28/2011
Brand: T-H Marine | Manufacturer: T-H Marine
Dimensions: 1.50 x 13.00 x 5.00 inches | Weight: 0.75 pounds
Warranty: LIMITED WARRANTY
See On Amazon #2
Fantictas Grease Gun Kit, 8000 PSI Leak-Proof Pistol Grip Grease Gun with Lock Coupler, 18" Spring Flex Hose, 14oz Load, 2 Standard Hose, Grease Injector, Needle, Coupler, Rigid Pipe, Sharp Nozzle
Asin: B0CLTSC7NG | Model: FAMGG004 | PartNumber: FAMGG004
Designed With Durability In Mind, The Fantictas Grease Gun Set Is Built To Withstand Demanding Work Environments. The Leak-Proof Construction Prevents Grease From Leaking Out, Minimizing Waste And Mess During Lubrication Tasks. This Ensures That Every Drop Of Grease Is Efficiently Applied, Maximizing The Effectiveness Of Your Maintenance Routine..
Fantictas Grease Gun Kit Supports 3 Filling Methods: Cartridge Loading, Filler Pump Loading, Bulk Loading. With A 14Oz Capacity, It Can Hold A Sufficient Amount Of Grease To Tackle Multiple Tasks Without Frequent Refills. This Grease Gun Set Will Undoubtedly Be A Valuable Addition To Your Toolkit, Offering High-Performance Lubrication And Ensuring The Longevity Of Your Machinery And Equipment. If You Have Any Questions Or Concerns, Please Contact Us Via Amazon..
Equipped With A Lock Coupler, This Grease Gun Kit Provides A Secure Quickly Connection Between The Gun And The Grease Fitting, Preventing Accidental Disengagement During Operation. This Feature Enhances Stability And Prevents Grease From Splattering Or Spraying, Keeping Your Workspace Clean And Highly Effective..
This Comprehensive Kit Includes Essential Accessories To Meet Your Grease Application Needs. The 18" Spring Flex Hose Offers Flexibility And Reach, Making It Easier To Access Tight Spaces And Difficult-To-Reach Areas. Additionally, The Set Comes With 1X Lock Coupler, 2X Standard Hoses, 1X Grease Needle 1X Grease Injector, 1X Reinforced Coupler, 1X Rigid Pipe, And 1X Sharp Nozzle, Ensuring Versatility And Compatibility With Various Grease Fittings..
Features
- The Fantictas Grease Gun Set is a high-quality tool designed for efficient lubrication. With its leak-proof pistol grip and lock coupler, this grease gun delivers a powerful pressure of 8000 PSI. The set includes an 18" spring flex hose, two standard hoses, a coupler, a rigid pipe, a sharp nozzle, and Grease Injector, Needle. This comprehensive set provides all the necessary components for easy and precise greasing. Whether you're working on machinery or vehicles, this grease gun set is a reliable choice to ensure smooth operation and optimal performance.
- This comprehensive kit includes essential accessories to meet your grease application needs. The 18 spring flex hose offers flexibility and reach, making it easier to access tight spaces and difficult-to-reach areas. Additionally, the set comes with 1x lock coupler, 2x standard hoses, 1x grease needle 1x grease Injector, 1x reinforced coupler, 1x rigid pipe, and 1x sharp nozzle, ensuring versatility and compatibility with various grease fittings.
- Designed with durability in mind, the Fantictas Grease Gun Set is built to withstand demanding work environments. The leak-proof construction prevents grease from leaking out, minimizing waste and mess during lubrication tasks. This ensures that every drop of grease is efficiently applied, maximizing the effectiveness of your maintenance routine.
- Equipped with a lock coupler, this grease gun kit provides a secure quickly connection between the gun and the grease fitting, preventing accidental disengagement during operation. This feature enhances stability and prevents grease from splattering or spraying, keeping your workspace clean and highly effective.
- Fantictas grease gun kit supports 3 filling methods: cartridge loading, filler pump loading, bulk loading. With a 14oz capacity, it can hold a sufficient amount of grease to tackle multiple tasks without frequent refills. This grease gun set will undoubtedly be a valuable addition to your toolkit, offering high-performance lubrication and ensuring the longevity of your machinery and equipment. If you have any questions or concerns, please contact us via amazon.
- See more on Amazon...
Brand: Fantictas | Manufacturer: Fantictas
Warranty: 1 year
See On Amazon #3
Ironwood Pacific HelmsMate Tiller Extension Handle U | Universal Joint Model | 37"-51" Extendable
Asin: B01E1B7Z2O | Model: N/A | PartNumber: N/A
Ean: 0722024316584, 0782516471474, 0768674090344, 0755723638701, 6521515357211, 0757183107995, 0611104323812, 0826713926716, 0834742006248, 0525171220625
UPC: 525171220625, 755723638701, 826713926716, 834742006248, 611104323812, 757183107995, 722024316584, 768674090344, 782516471474
Fits Gas And Electric Trolling Motors 15 Hp And Below - Designed For Trolling Motors And Trolling Speeds Only..
Extendable Models Include Stainless Snap Button - Snap Button Enables Handle Length To Be Adjusted While Enabling Throttle Control While Trolling..
Made In Usa With Limited Lifetime Warranty - Ideal For Fishing Boats, Canoes, Kayaks And Some Sail Boats..
Manufactured With Heavy Duty Marine Grade Materials - Anodized Aluminum Tube, Corrosion Resistant Fittings And Unbreakable Nylon Clamp Are Designed For Tiller Handle Fit And Durability..
Full Steering And Throttle Control While Sitting Away From The Motor - Sit Away From The Motor While Controlling Your Steering And Speed..
Features
- UNIVERSAL JOINT ENABLES PUSH PULL STEERING - Universal joint model clamps to your tiller handle and allows for easy push-pull steering with full throttle control. Extends from 37" - 51" in length.
- FULL STEERING AND THROTTLE CONTROL WHILE SITTING AWAY FROM THE MOTOR - Sit away from the motor while controlling your steering and speed.
- FITS GAS AND ELECTRIC TROLLING MOTORS 15 HP AND BELOW - Designed for trolling motors and trolling speeds only.
- MANUFACTURED WITH HEAVY DUTY MARINE GRADE MATERIALS - Anodized aluminum tube, corrosion resistant fittings and unbreakable nylon clamp are designed for tiller handle fit and durability.
- EXTENDABLE MODELS INCLUDE STAINLESS SNAP BUTTON - Snap button enables handle length to be adjusted while enabling throttle control while trolling.
- MADE IN USA WITH LIMITED LIFETIME WARRANTY - Ideal for fishing boats, canoes, kayaks and some sail boats.
- See more on Amazon...
Brand: Ironwood Pacific | Manufacturer: Ironwood Pacific Outdoors
Dimensions: 2.00 x 35.00 x 9.00 inches | Weight: 1.80 Pounds
See On Amazon #4
RITE-HITE New Motor Holder - Stabilizes Outboard Motors with Two Trim Cylinders and Newly Added Allen Wrench
Asin: B01LE77D7A | Model: 31023 | PartNumber: 31023
There Are Some Boats That Will Sit To Low To The Ground While Being Trailered, Resulting In Not Being Long Enough With This Product In Use. It Is Unclear As To If There Are Certain Brands Of Boats Or Certain Lengths That Cause This. If This Becomes An Issue For You, We Can Make Longer Extensions That Could Help This Issue. If There Are Any Questions Please Contact Us..
No More Grease And Grime.
It Is Constructed From Unbreakable Uhmw Material And A High Impact Rubber Top. This Motor Holder Is The Affordable Way Of Reducting The Risk Of Damaging Your Motor While On The Move.
Comes With Two Red Hydraulic Steering Stabilizers Included For Trailering And An Allen Wrench So That The Motor Will Not Rotate Side To Side While Trailering..
Features
- NEW DESIGN! Fits most motors as long as there are 2 TRIM CYLINDERS
- Comes with Two Red Hydraulic Steering Stabilizers Included for Trailering and an Allen Wrench so that the motor will not rotate side to side while trailering.
- There are some boats that will sit to low to the ground while being trailered, resulting in not being long enough with this product in use. It is unclear as to if there are certain brands of boats or certain lengths that cause this. If this becomes an issue for you, we can make longer extensions that could help this issue. If there are any questions please contact us.
- It is constructed from unbreakable UHMW material and a high impact rubber top. This motor holder is the affordable way of reducting the risk of damaging your motor while on the move
- No More Grease and Grime
- See more on Amazon...
Brand: RITE-HITE | Manufacturer: R.M. Industries
See On Amazon #5
LEADALLWAY Outboard Boat Motor Carrier-315LBS Motor Cart With 4 Rubber Casters And Storage
Asin: B07QXPRFBP | Model: MS002 | PartNumber: MS002 | Ean: 4991956768136
【Soft Ergonomic Handles】 Design Featured With Soft Handles,Making The Motor Stand Pushing At Ease..
【Quality Guarantee】 100% Satisfaction After Sale Service Guarantee,If You Do Not Like Our Outboard Motor Carts Outboard Motor Carts Engine Stand Want To Refund,Can Get Their Very Penny Back..
【Sturdy】Solid Steel Tube Structure Offers The Dolly Can Bear A Weight Up To 315 Lbs. Carts Ship Unassembled,But With A Clear Instructions For Installation..
【Multi-Functional】This Motor Cart Dolly,Not Only Can Carrying Outboard Motor,But Also Work For Storing Your Boats A Bottom Rack With Strap,Or Wherever You Need,Very Practical!.
Features
- Stable and Energy Saving Designed with four 8.8" rubber rear wheels and Two front 3" universal stabilizer casters caster enhancing stability,make the motor carrier easily moving.
- Multi-Functional This Motor Cart Dolly,not only can carrying outboard motor,but also work for storing your boats a bottom rack with strap,or wherever you need,very practical!
- Soft Ergonomic Handles Design Featured with soft handles,making the motor stand pushing at ease.
- Sturdy Solid Steel Tube Structure offers the dolly can bear a weight up to 315 LBS. carts ship unassembled,but with a clear instructions for installation.
- Quality Guarantee 100% satisfaction after sale service guarantee,if you do not like our outboard motor carts outboard motor carts engine stand want to refund,can get their very penny back.
- See more on Amazon...
Brand: LEADALLWAY | Manufacturer: LEADALLWAY
Dimensions: 43.00 x 27.60 x 19.00 inches | Weight: 33.00 Pounds
See On Amazon #6
DotLine Adjustable Outboard Motor Tilter
Asin: B0000AZ878 | Model: 1250 | PartNumber: 1250 | Ean: 0029027012506 | UPC: 029027012506
Heavy-Duty Stainless Steel Arm Adjusts To Fit Shrouds Of Motors Up To 75 Hp With Handholds At The Top Of The Shroud.
Will Not Work On Motors With Handholds That Are Not At The Top Of The Shroud Or Are Not Flat.
Cast Aluminum Body And Legs With Protective Cushions And Hand Grips.
For Outboard Motors Without Power Tilt.
Features
- Assists in tilting the motor back with less strain
- For outboard motors without power tilt
- Heavy-duty stainless steel arm adjusts to fit shrouds of motors up to 75 hp with handholds at the TOP of the shroud
- Cast aluminum body and legs with protective cushions and hand grips
- Will not work on motors with handholds that are not at the top of the shroud or are not flat
- See more on Amazon...
Brand: Dotline | Manufacturer: Drifter Marine
Dimensions: 22.00 x 6.00 x 6.00 inches | Weight: 3.00 pounds
See On Amazon #7
U-BCOO Bracket & Hinge Assembly Electric Trolling Motor Stent Electric Outboard Motor Stent
Asin: B073F92412 | Model: 615855657967 | PartNumber: 615855657967 | Ean: 0615855657967 | UPC: 615855657967
Made Of High Strength Nylon Plastic..
Note: Please Please Check If It Is Suitable For Your Electric Outboard Motor Before Placing An Order. Thank You..
For Shaft Size 1 1/8", Stainless Steel Hardware..
Max Width 6" (From Washer To Washer).
Features
- Max Transom Thickness 3"
- Max Width 6 (From washer to washer)
- Made of high strength nylon plastic.
- For shaft size 1 1/8, Stainless steel hardware.
- Note: Please Please check if it is suitable for your electric outboard motor before placing an order. Thank you.
- See more on Amazon...
Brand: U-BCOO | Manufacturer: U-BCOO
Dimensions: 5.91 x 13.78 x 8.66 inches | Weight: 2.65 pounds
See On Amazon #8
881170a15-4000 side mount Gen I for mercury outboard engine throttle control box 2-stroke 8pin
Asin: B09SG4915Y | Model: GEN I Side Mount | PartNumber: GEN I Side Mount | Ean: 6974310112231
·Power Trim Switch.
·With Switch Key.
·Side Mount Control Box Remote Control-4000 Side Mount.
·Pull To Open With 5M Harness.
Features
- 2-stroke 8pin&12pin
- Pull to open with 5m harness
- Power trim switch
- Side Mount Control Box Remote Control-4000 Side Mount
- With switch key
- See more on Amazon...
Brand: POWEROB TEC | Manufacturer: PBD POWER PRODUCT Co,. LTD
Warranty: 90 Days
See On Amazon #9
VEVOR Boat Throttle Control, 8M0059686 Top-Mounted Outboard Remote Control Box for Mercury PT 2-Stroke, Marine Throttle Control Gear Box with Power Trim Switch
Asin: B0CYPL1JQM | Model: 8M0059686 | PartNumber: 8M0059686 | Ean: 0197988200215 | UPC: 197988200215
Trim And Tilt Switch: Enhance Your Boating Experience With The Power Trim And Tilt Switch Directly On The Control Lever Handle. This Design Allows For Easy Adjustment Of The Stern Engine's Position, Aiding In Cargo Loading/Unloading And Preventing Prolonged Engine Immersion..
Long Control Cable: Our Remote Control Box Has A 1 Ft/320 Mm Long Harness With A 3-Pin Connector, And A 5.9 Ft/1800 Mm Long Harness With 2-Pin Connector, Ensuring Ample Reach For Remote Power Supply Setups. During Installation, Turn Off The Ignition, Remove The Key, Disconnect All Cables And Power, And Measure The Cable Length..
Low-Temperature Operation: The Outboard Remote Control Is Equipped With A Low-Temperature Air-Fuel Ratio Adjustment Function, Which Can Adjust The Fuel And Air Mixture Ratio In Cold Weather, Helping To Ensure That The Vessel Can Operate Reliably In Extreme Temperatures..
Smooth Operation: Press The Neutral Release Button To Shift Into Gear. Push Forward About 35° Into Forward Gear, And Push Back About 35° Into Reverse Gear. With The Control Lever In Neutral, Push The Free Accelerator Button To Open The Throttle For Starting And Warm-Up..
Features
- Boat Throttle Control: Our top-mounted outboard remote control kit is compatible with Mercury outboard motors. It's made from aluminum ADC2+ASA and an ABS shell handle that resists cracking. The plastic button ensures firm and reliable operation. The Mercury boat throttle control box is more robust and withstands multiple push-pull maneuvers.
- Smooth Operation: Press the neutral release button to shift into gear. Push forward about 35 into forward gear, and push back about 35 into reverse gear. With the control lever in Neutral, push the free accelerator button to open the throttle for starting and warm-up.
- Trim and Tilt Switch: Enhance your boating experience with the power trim and tilt switch directly on the control lever handle. This design allows for easy adjustment of the stern engine's position, aiding in cargo loading/unloading and preventing prolonged engine immersion.
- Low-Temperature Operation: The outboard remote control is equipped with a low-temperature air-fuel ratio adjustment function, which can adjust the fuel and air mixture ratio in cold weather, helping to ensure that the vessel can operate reliably in extreme temperatures.
- Long Control Cable: Our remote control box has a 1 ft/320 mm long harness with a 3-pin connector, and a 5.9 ft/1800 mm long harness with 2-pin connector, ensuring ample reach for remote power supply setups. During installation, turn off the ignition, remove the key, disconnect all cables and power, and measure the cable length.
- See more on Amazon...
Brand: VEVOR | Manufacturer: VEVOR
Dimensions: 3.74 x 17.91 x 5.71 inches | Weight: 7.03 pounds
See On Amazon #10
Rox Speed FX Pivot Handlebar 2" Riser 7/8"Handlebar Black 1R-P2SS
Asin: B0052YK270 | Model: 1R-P2SS | PartNumber: 1R-P2SS | Ean: 7294104719057, 0779422287091 | UPC: 779422287091
Reducers Lock Into Risers To Insure No Slippage Between Components.
These Will Also Work On Snowmobiles That Have Flat Plate Steering Stems.
Out-Board Positioning Also Makes Them Incredibly Durable.
Features
- Risers are held by the original clamps and re-clamp the handlebars with pivoting fore and aft adjustment
- Out-board positioning also makes them incredibly durable
- Reducers lock into risers to insure no slippage between components
- These will also work on snowmobiles that have flat plate steering stems
- See more on Amazon...
Brand: Rox Speed FX | Manufacturer: ROX SPEED FX
Dimensions: 6.00 x 11.00 x 3.00 inches | Weight: 0.65 pounds
See On Amazon #11
Mercury outboard Remote Control 8M0030550-4500 SIDE MOUT GEN II Control box RC OB TRIM-CHROME
Asin: B0BRJ177W2 | Model: GEN II-4500 SIDE MOUNT | PartNumber: GEN II-4500 SIDE MOUNT | Ean: 6974310119896
Side Mount.
Gen Ii.
Brand: POWEROB TEC | Manufacturer: POWEROB TEC
Warranty: 90 day
See On Amazon #12
883710A02 GEN II Side Mount Outboard Engine Throttle Shifting Remote Control Box Pull To Open For Mercury with Power Trim Tilt Switch
Asin: B0CJNGLZ8M | Model: 883710A02 | PartNumber: 883710A02 | Ean: 6975852840989
Tilt/Lift Control: Adjust The Angle Of The Outboard Engine To Prevent The Propeller From Touching The Bottom When The Ship Sets Sail, Stops, Or Navigates In Shallow Water..
With Flameout Rope : Insert The Shutdown Switch, Abs Plastic Spring Hook Is Used To Connect With The Operator. When The Operator Falls Or Leaves The Control Device, Emergency Shutdown Is Required To Prevent Dangerous Situations And Ensure Safety. The Rope Is Made Of Woven Nylon Fibers, Providing Maximum Safety And Durability, As Well As Scalability And Flexibility..
Waterproof Design: Due To The Special Working Environment, The Control Box Must Have Good Waterproof Performance..
Emergency Stop Switch: Quickly Shut Down The Engine In Emergency Situations To Ensure Safety..
Throttle Shift Control：Pull To Open.Switch Between Forward And Reverse Gears To Change The Direction Of The Ship's Travel..
Features
- Replace Part : Repair and replacement parts in the after-sales market,Replacement Mercury OEM number is 883710A02 for reference
- Throttle Shift Control Pull To Open.Switch between forward and reverse gears to change the direction of the ship's travel.
- Tilt/Lift Control: Adjust the angle of the outboard engine to prevent the propeller from touching the bottom when the ship sets sail, stops, or navigates in shallow water.
- Emergency Stop Switch: Quickly shut down the engine in emergency situations to ensure safety.
- With Flameout Rope : Insert the shutdown switch, ABS plastic spring hook is used to connect with the operator. When the operator falls or leaves the control device, emergency shutdown is required to prevent dangerous situations and ensure safety. The rope is made of woven nylon fibers, providing maximum safety and durability, as well as scalability and flexibility.
- Waterproof Design: Due to the special working environment, the control box must have good waterproof performance.
- See more on Amazon...
Brand: BOATCON | Manufacturer: BOATCOM
Warranty: 90 days
See On Amazon #13
FUTURUP Boat Outboard Motor Bracket, Aluminum outboard Engine Support (7.5 HP to 20 HP)
Asin: B0B129LWV4 | Model: FM7953 | PartNumber: FM7953
Spring Loaded 4-Position Locking Height Adjustment, Wide Track Body For Added Stability..
Perfect For Small To Medium Sized Powerboats And Yachts..
Solid Polypropylene Mounting Board. Easy To Lift-Heavy Spring Helps Balance Motor Weight..
Retractable Bracket Easy To Drive And Auxiliary Motor On Sailing, With Reinforced Welded Frame And Stamping Stainless Steel Parts..
Features
- Overall is made of Aluminum, Base is made of Plastic. Hp rating: 7-1/2 to 20, Broad Size: 8-1/4 10-3/8 , Mounting Size: 5-1/4 9 , maximum weight is 52kg (115lbs).
- Retractable bracket easy to drive and auxiliary motor on sailing, with reinforced welded frame and stamping stainless steel parts.
- Spring loaded 4-position Locking Height Adjustment, Wide track body for added stability.
- Solid Polypropylene Mounting board. Easy to lift-heavy spring helps balance motor weight.
- Perfect for small to medium sized powerboats and yachts.
- See more on Amazon...
Brand: FUTURUP | Manufacturer: NACHUAN
Dimensions: 3.94 x 17.32 x 11.81 inches
See On Amazon #14
Mophorn Boat Throttle Control 881170A15 for Mercury Side Mounted Outboard Remote Control Single Lever Binnacle with Key Switch and Lanyard
Asin: B07LFXJ9P8 | Model: 881170A15 | PartNumber: 881170A15 | Ean: 0601707199327 | UPC: 601707199327
15' Harness With 8 Pin Connector - A Handle Mounted Trim Switch And A 15' Harness With 8 Pin Deutsche Connector..
Thumb-Operated Trim/Tilt Switch - The Power Trim And Tilt Switch Are Attached To The Control Lever Grip. Pushing It Up Trims Up And Tilts Up The Engine And Vice Versa..
Shut-Off Lanyard & Clip - The Cord Can Secure The Operation By Being Attached To The Operator's Clothing, Or Arm, Or Leg. Should Operators Fall Or Leave The Helm, The Cord Will Pull Out The Clip, Stopping Ignition..
Features
- EASY & SMOOTH OPERATION - Exceptionally smooth operation is delivered, To shift into forward and reverse, rotate the control lever downward, further rotated downward, the throttle opens.
- SHUT-OFF LANYARD & CLIP - The cord can secure the operation by being attached to the operator's clothing, or arm, or leg. Should operators fall or leave the helm, the cord will pull out the clip, stopping ignition.
- 15' HARNESS WITH 8 PIN CONNECTOR - A handle mounted trim switch and a 15' harness with 8 pin Deutsche connector.
- THUMB-OPERATED TRIM/TILT SWITCH - The power trim and tilt switch are attached to the control lever grip. Pushing it UP trims up and tilts up the engine and vice versa.
- See more on Amazon...
Brand: Vevor | Manufacturer: Mophorn
Dimensions: 5.50 x 16.90 x 11.00 Inches
See On Amazon #15
VEVOR Boat Throttle Control, 881170A15 Side-Mounted Outboard Remote Control Box for Mercury PT 2-Stroke, Marine Throttle Control Box with Power Trim Switch, 16.3 ft Harness 8+4 Pin, and Lanyard
Asin: B0CYPDBL4W | Model: 881170A15 | PartNumber: 881170A15 | Ean: 0197988199328 | UPC: 197988199328
Trim And Tilt Switch: Enhance Your Boating Experience With The Power Trim And Tilt Switch Directly On The Control Lever Handle. This Design Allows For Easy Adjustment Of The Stern Engine's Position, Aiding In Cargo Loading/Unloading And Preventing Prolonged Engine Immersion. Making Your Engine's Tilt Up/Down Easier With Our Throttle Control Box..
16.3 Ft Control Cable: Our Remote Control Box Has A 16.3 Ft/4970 Mm Long Harness With An 8-Pin Plug And A 4-Pin Plug. And A 9.4"/240 Mm Cable With A 5-Pin Plug And 4-Pin Connector For The Meter Connection, Ensuring Ample Reach For Remote Power Supply Setups. Crafted From Durable Thermoplastic Insulation Material, These Harnesses Are Built To Last. During Installation, Turn Off The Ignition, Remove The Key, And Disconnect All Cables And Power..
Emergency Stop Switch Lanyard: Our Outboard Engine Throttle Control Box Includes An Emergency Stop Switch Lanyard. This Lanyard Halts The Engine Automatically If The Driver Is Unexpectedly Displaced, Preventing Accidents. The Lanyard Can Securely Attach To The Driver's Waistband Or Wrist For Added Security..
Smooth Operation: Press The Neutral Release Button To Shift Into Gear, Push Forward To Move Forward, And Push Back To Move Backward. The Front-End Friction Adjustment Knob Provides Personalized Control Over Throttle Operation, Allowing You To Manage Speed And Thrust With Precision. Additionally, The Boat Throttle Control Has A Cold Start Air-Oil Ratio Adjustment Function That Ensures Reliable Operation In Extreme Temperatures..
Features
- Boat Throttle Control: Our side-mounted outboard remote control kit is compatible with Mercury PT outboard motors (2 strokes). It's made from aluminum ADC2+ASA within a cast aluminum housing and an ABS shell handle that resists cracking. The plastic button ensures firm and reliable operation. The Mercury boat throttle control box is more robust and withstands multiple push-pull maneuvers.
- Smooth Operation: Press the neutral release button to shift into gear, push forward to move forward, and push back to move backward. The front-end friction adjustment knob provides personalized control over throttle operation, allowing you to manage speed and thrust with precision. Additionally, the boat throttle control has a cold start air-oil ratio adjustment function that ensures reliable operation in extreme temperatures.
- Trim and Tilt Switch: Enhance your boating experience with the power trim and tilt switch directly on the control lever handle. This design allows for easy adjustment of the stern engine's position, aiding in cargo loading/unloading and preventing prolonged engine immersion. Making your engine's tilt up/down easier with our throttle control box.
- Emergency Stop Switch Lanyard: Our outboard engine throttle control box includes an emergency stop switch lanyard. This lanyard halts the engine automatically if the driver is unexpectedly displaced, preventing accidents. The lanyard can securely attach to the driver's waistband or wrist for added security.
- 16.3 ft Control Cable: Our remote control box has a 16.3 ft/4970 mm long harness with an 8-pin plug and a 4-pin plug. And a 9.4/240 mm cable with a 5-pin plug and 4-pin connector for the meter connection, ensuring ample reach for remote power supply setups. Crafted from durable thermoplastic insulation material, these harnesses are built to last. During installation, turn off the ignition, remove the key, and disconnect all cables and power.
- See more on Amazon...
Brand: VEVOR | Manufacturer: VEVOR
Dimensions: 3.35 x 12.40 x 12.01 inches | Weight: 9.77 pounds
See On Amazon #16
Outboard Remote Control 883710A02 For Mercury Cotrol Box Panel Mount Outboard
Asin: B0BS6CQVN3 | Model: 883710A02 | PartNumber: 883710A02 | Ean: 6975852840507
883710A02.
Brand: BOATBSN | Manufacturer: BOATBSN
Warranty: 90 day
See On Amazon #17
Outboard Remote Control Box 8M0011213 Throttle Concealed Side Mount For Mercury
Asin: B0937BDL9Z | Model: ZY-8M0011213 | PartNumber: ZY-8M0011213 | Ean: 6974310110305
Improved Throttle And Shift Control.
Stop Switch And Lyanyard.
Easy Pistol Grip Trim Switch.
No Integrated Key Switch And Lanyard.
Features
- PBD8M0011213
- NO Integrated Key Switch and Lanyard
- Improved throttle and shift control
- Easy Pistol Grip trim switch
- STOP SWITCH and LYANYARD
- See more on Amazon...
Brand: ZOYAN | Manufacturer: PBD POWER PRODUCT Co,. LTD
See On Amazon #18
Minn Kota 1854108 Telescoping Extension Handle/MKA-44
Asin: B001PTHKPS | Model: 1854108 | PartNumber: 1854108
Ean: 0157728136839, 0611104326059, 0029402031719, 0523161314354, 0844296037254, 0066510909578, 0826713881763, 7091346690744
UPC: 523161314354, 844296037254, 066510909578, 611104326059, 826713881763, 157728136839, 029402031719
Total Speed And Steering Control In Any Situation.
Simply Twist To Loosen, Adjust And Tighten.
No Tools Required To Install.
Features
- Fits all Minn Kota hand steer motors
- No tools required to install
- Total speed and steering control in any situation
- Simply twist to loosen, adjust and tighten
- See more on Amazon...
First Available: 01/01/2008
Brand: Minn Kota | Manufacturer: Minn Kota
Dimensions: 3.25 x 30.25 x 6.75 Inches | Weight: 0.01 pounds
Warranty: One-Year Warranty
See On Amazon #19
VEVOR Hydraulic Steering Cylinder, HC4645H Front Mount Hydraulic Outboard Marine Steering Cylinder, Suit for Up to 150HP Boats Steering
Asin: B0C2PYQZSM | Model: HC4645H | PartNumber: HC4645H | Ean: 0840349940922 | UPC: 840349940922
Built-In Two-Way Lock: The Hydraulic Steering Cylinder Is Equipped With A Built-In Two-Way Locking Valve Which Eliminates Rebound Torque During Torsion..
Sturdy Aluminum Alloy: The Hydraulic Steering Cylinder Is Made From A High-Strength Aluminum Alloy Material, Which Is Corrosion-Resistant, And High-Density To Effectively Prevent Seawater Erosion. Enjoy The Steering Helm For Years To Come..
Orb Fitting: The Positionable Stainless Steel O-Ring (Orb) Fittings For Easy Hose Routing. And We Put Two Extra Tubes For Easy Installation And Replacement..
Advanced Crush Resistance: Our Hydraulic Outboard Steering Cylinder Provides Excellent Resistance To Repeated Compression Set And Is Designed To Better Withstand The Harsh Marine Environment..
Features
- HC4645H Front Mount Cylinder: HC4645H steering cylinder is ideal for outboard powered boats like center console, offshore fishing, bass boats, flats boats and many more. For use with Yamaha applications where it is necessary to mount the steering cylinder underneath the steering arm.
- Advanced Crush Resistance: Our hydraulic outboard steering cylinder provides excellent resistance to repeated compression set and is designed to better withstand the harsh marine environment.
- Built-In Two-Way Lock: The hydraulic steering cylinder is equipped with a built-in two-way locking valve which eliminates rebound torque during torsion.
- ORB Fitting: The Positionable Stainless Steel O-Ring (ORB) Fittings for easy hose routing. And we put two extra tubes for easy installation and replacement.
- Sturdy Aluminum Alloy: The hydraulic steering cylinder is made from a high-strength aluminum alloy material, which is corrosion-resistant, and high-density to effectively prevent seawater erosion. Enjoy the steering helm for years to come.
- See more on Amazon...
Brand: VEVOR | Manufacturer: VEVOR
Dimensions: 7.00 x 11.80 x 5.50 inches | Weight: 4.30 Pounds
See On Amazon #20
Extreme Max 3005.5126 Outboard Motor Storage Bracket for 1" Rails - Fits 2-Stroke Engines Up to 8 HP
Asin: B0BGYTF3J5 | Model: 3005.5126 | PartNumber: 3005.5126 | Ean: 0810074511797 | UPC: 810074511797
Includes All Necessary Hardware For Easy Installation.
For Use In Storage Situations Only - Do Not Operate The Outboard While Attached To The Storage Bracket.
Securely Attaches To Your Boat's Rails, Taking Storage Weight Off Your Transom.
Features
- Excellent storage solution for your small outboard motor
- Securely attaches to your boat's rails, taking storage weight off your transom
- Includes all necessary hardware for easy installation
- For use in storage situations only - Do not operate the outboard while attached to the storage bracket
- See more on Amazon...
Brand: Extreme Max | Manufacturer: Extreme Max
Warranty: 2-year warranty
See On Amazon
Looking For Something Else?
Search