Resistors 20pcs Thermistor Resistor NTC MF11-103 10K Thermal Resistor Replacement Resistor
Asin: B0D2VP2MDR | Model: SQGGMOAUSC | PartNumber: SQGGMOAUSC | Ean: 9143009936619
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Color: Black.
Model Number: Mf11-103.
Resistance Tolerance: 10K.
Technology: Carbon Composition.
Features
- Type: Thermal Resistor
- Technology: Carbon Composition
- Color: black
- Resistance Tolerance: 10K
- Model Number: MF11-103
- See more on Amazon...
Brand: SQGGMOAUSC | Manufacturer: SQGGMOAUSC
Weight: 0.11 pounds
See On Amazon Similar To Resistors 20pcs Thermistor Resistor NTC
#1
5PCS Creality 3D Printer NTC Thermistor 100K, NTC 3950 100K ohm Thermistor Temp Sensor for Creality Ender 3/Ender 3 Pro/Ender 3 Neo/Ender 3 Max/Voxelab Aquila, XH2.54-2P Connector (1.3m/51.1inch)
Asin: B0714MR5BC | Model: 3D-RMDZ-5PCS | PartNumber: 3D-RMDZ-5PCS | Ean: 0649910034431 | UPC: 649910034431
Ntc Thermistor: Used For Heated Bed Or Hot End. Our Ender 3 Pro Thermistor Replacement Is Compatible With Most 3D Printers..
After-Sales Service: If You Have Any Unsolvable Problems While Using The Ender 3 Thermistor Replacement, Please Feel Free To Contact Us. Our After-Sales Technical Team Will Provide You With Detailed Solutions Within 24 Hours..
Long Life Service: High Precision, High Sensitivity, And Fast Temperature Conduction, High-Temperature Resistance..
Note Before Buying: Our Ender 3 Thermistor Is Not Fit For Ender 3 V2/Ender 3S/Cr-10S Pro V2/Cr-10S Pro/Ender 2 Pro/Ender 6/Prusa I3 3D Printer. Please Measure The Length Of Your 3D Printer's Thermistor And Confirm Whether This Thermistor Is Compatible With Yours Before Buying..
Features
- Wire Length: 51.1inch /1.3m. The package includes 5 3D printer thermistors. 2-pin XH2.54 female connector.
- Note Before Buying: Our Ender 3 thermistor is not fit for Ender 3 V2/Ender 3S/CR-10S Pro V2/CR-10S Pro/Ender 2 Pro/Ender 6/Prusa i3 3D Printer. Please measure the length of your 3D printer's thermistor and confirm whether this thermistor is compatible with yours before buying.
- NTC Thermistor: Used for heated bed or hot end. Our Ender 3 pro thermistor replacement is compatible with most 3D printers.
- Long Life Service: High precision, high sensitivity, and fast temperature conduction, high-temperature resistance.
- After-sales Service: If you have any unsolvable problems while using the Ender 3 thermistor replacement, please feel free to contact us. Our after-sales technical team will provide you with detailed solutions within 24 hours.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Comgrow
See On Amazon #2
Creality Original 3D Printer NTC100K Thermistor Temp Sensor 5 Pack Quick Replacement Single Ended Glass Sealed for Creality Ender 3/Ender 3 V2/Ender 3 Pro/Ender 5/Ender 5 Pro 3D Printer(30cm/11.8inch)
Asin: B0BJJQGC17 | Model: 3D-Thermistor-5P | PartNumber: 3D-Thermistor-5P
🌡【Single-Ended Glass Sealed】The Glass Material Used In The Package Ensures The Maximum Service Life With Precision Temperature Measurement, Resistance To High Temperatures, And Fast Temperature Conduction..
🌡【Official Creality 3D Store】Official Creality 3D Store! We Provide Professional After-Sales Support. Please Kindly Contact Us(Seller) Via “Ask A Question” Find Us Directly Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What The Question..
🌡【Easy To Install】Only 4 Steps To Install, No Need To Disassemble The Motherboard And Wire Harness, Fast Wiring Just Replace The Thermistor Directly. There Is A Tin Ring Inside, Waterproof Hot Melt Glue, No Welding, Sealing And Waterproof, Anti-Leakage, High-Temperature Resistance..
🌡【The Temperature Measurement】 -30 °C ~ +300 °C, Can Replace The Original Creality 3D Printer Nct Thermistor. Fit For Printing High-Temperature Filament..
Features
- Upgrade NTC Thermistor 100% Official Creality 3D Printer thermistor used for hotbed or hotend. Single-ended glass sealed temperature measurement. Compatible with Ender 3 series, Ender 5 series, Ender-6, and part of CR 10 series.
- The Temperature Measurement -30 C ~ +300 C, can replace the original Creality 3D Printer NCT thermistor. Fit for printing high-temperature filament.
- Single-ended Glass Sealed The glass material used in the package ensures the maximum service life with precision temperature measurement, resistance to high temperatures, and fast temperature conduction.
- Easy to Install Only 4 steps to install, no need to disassemble the motherboard and wire harness, fast wiring just replace the thermistor directly. There is a tin ring inside, waterproof hot melt glue, no welding, sealing and waterproof, anti-leakage, high-temperature resistance.
- Official Creality 3D Store Official Creality 3D Store! We provide professional after-sales support. Please kindly contact us(seller) via ask a question find us directly cause our customer service will respond to you within 24 hours no matter what the question.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #3
HICTOP Ender 3 Thermistor 1.2m/47.2 Inches NTC 3950 100k Thermistor Temp Sensor for Reprap Creality Ender 3,Ender 3 Pro,Ender 3 Neo,Ender 3 Max,CR-10 10S,Prusa i3, 3D Printer 2Pin XH2.54 (Pack of 5)
Asin: B097SSXSX6 | Model: HIC-002 | PartNumber: HIC-002 | Ean: 0602309981952 | UPC: 602309981952
There Is A 2 Pin Female Connector On The Thermistor For 3D Printer.
Recommended Parameters For The Thermistor: R25℃=100K B25/50=3950K± 1%.
Wire Length For The 100K Thermistor 3D Printer: 1.2M/47.2 Inches..
Ender 3 Thermistor Is Compatible With Most 3D Printers In The Market Such As Ender3,Ender3 Pro,Ender3 V2,Ender 3 Neo,Ender 3 Max,Cr-10S Pro V2,Cr-10S Pro,Ender 2 Pro,Ender 6,Prusa I3,Cr-10,Hictop D3 Hero,Voxelab Aquila Etc. 3D Printers.
Features
- HICTOP 3d printer thermistor 1.2m can be used on both of the heated bed and the extruder for 3d printers
- Ender 3 thermistor is compatible with most 3D printers in the market such as ender3,ender3 pro,ender3 V2,Ender 3 Neo,Ender 3 Max,CR-10S Pro V2,CR-10S Pro,Ender 2 Pro,Ender 6,Prusa i3,CR-10,hictop d3 hero,Voxelab Aquila etc. 3D printers
- There is a 2 pin female connector on the thermistor for 3D printer
- Wire length for the 100K thermistor 3d printer: 1.2m/47.2 inches.
- Recommended parameters for the thermistor: R25 =100K B25/50=3950K 1%
- See more on Amazon...
Brand: HICTOP | Manufacturer: HIC Technology
Dimensions: 3.54 x 4.33 x 0.79 inches
See On Amazon #4
TWTADE 2 Pcs 3M 10K B3950 Thermistor Temperature Sensor,able to Support -25 to 125 Degree Celsius,Sensitive NTC Temperature Sensor Probeprobes has 5 * 25mm Stainless Steel housing NTC-3M-2P
Asin: B086YD9L28 | Model: NTC-3M-2P | PartNumber: NTC-3M-2P | Ean: 0747966685864 | UPC: 747966685864
Wide Application: This Multifunctional Test Probe Can Be Used In Household Air Conditioner, Refrigerator, Water Fountain, Drying Box, Constant Box, Etc..
Package Content：2 X 3 Meter Temperature Sensor.
100% Brand-New Products Are Guaranteed For Two Years. If Quality Problems Are Found During The Guarantee Period, Please Contact Us By Email And We Will Replace Them For Free..
Product Specification : The Line Is Three Meter Long.This Temperature Test Probe Has 5*25Mm Stainless Steel Housing And Able To Tolerate The Widest Measuring Range (-25°C To 125°C (-13℉ To 257℉)..
Features
- Product name : Temperature Sensor
- Product specification : The line is three meter long.This temperature test probe has 5*25mm stainless steel housing and able to tolerate the widest measuring range (-25 c to 125 c (-13 to 257 ).
- Wide Application: This multifunctional test probe can be used in household air conditioner, refrigerator, water fountain, drying box, constant box, etc.
- 100% brand-new products are guaranteed for two years. If quality problems are found during the guarantee period, please contact us by email and we will replace them for free.
- Package content 2 x 3 meter Temperature Sensor
- See more on Amazon...
Brand: TWTADE | Manufacturer: TWTADE
See On Amazon #5
4Pcs Ender 3 v2 Thermistor 1m/39.4Inches, 3D Printer 100K ohm NTC 3950 Thermistor Temp Sensor Compatible for Creality Ender 3/Ender 3 Pro/Ender 3 Neo/Ender 5/Voxelab Aquila, 2Pin XH2.54,
Asin: B0CM3FSFF9
This 3D Printer Ohm 100K Ntc Thermistor Compatible For Ender 3 /Ender 3 Pro/Ender 5/Ender 5 Plus/Voxelab Aquila/Cr10/Elegoo Neptune 3, Direct Replacement For Sovol Sv1 Bed Thermistor, Etc..
100K Ohm Ntc 3950 Thermistor Used For 3D Printer Heated Bed Or 3D Printer Hotend. Such As: Ender 3 Hotend, Cr10 Hotend,3D Printer Extruder J-Head Hotend,Etc..
They Are Perfect For The 3D Printer(Ender 3 V2/Ender 3 Pro/Ender 3 Max), But The 1M Wires Are A Bit Short ; So You Need Had To Cut The Thermistor Off And Splice It In And Tape The Splices. Plug And Play With Lerdge K Board For Diy Printer..
Recommended Parameters For The 3D Printer Thermistor: R25℃=100K B25/50=3950K± 1%; Connector : 2Pin Xh2.54..
Features
- Package includes: 4Pcs 1m/39.4 Inches 3D Printer ohm NTC 100K 3950 Thermistor Sensors;
- Recommended parameters for the 3D Printer Thermistor: R25 =100K B25/50=3950K 1%; Connector : 2pin XH2.54.
- This 3D Printer ohm 100k ntc Thermistor Compatible for Ender 3 /Ender 3 Pro/Ender 5/Ender 5 Plus/Voxelab Aquila/CR10/Elegoo Neptune 3, Direct replacement for Sovol SV1 bed thermistor, etc.
- They are Perfect for the 3d printer(Ender 3 V2/Ender 3 Pro/Ender 3 max), but the 1m wires are a bit short ; so you need had to cut the thermistor off and splice it in and tape the splices. Plug and play with Lerdge K board for DIY printer.
- 100K ohm NTC 3950 Thermistor Used for 3D Printer Heated Bed or 3D Printer Hotend. such as: Ender 3 Hotend, CR10 Hotend,3D Printer Extruder J-Head Hotend,etc.
- See more on Amazon...
Brand: TIEXYE | Manufacturer: TIEXYE
See On Amazon #6
Upgrade M3 Hex Screw in Fixing Thermistor 100K 3950 Temperature Sensor for Ender 3 V2 Pro CR10 and Other 3D Printer Extruder Hotend (100K 3950)
Asin: B08YNX79H8 | Model: m3 screw in fixing thermistor | PartNumber: m3 screw in fixing thermistor | Ean: 0791548327406 | UPC: 791548327406
Package: 1Piece M3 Screw In Thermistor.
For The Printer Which Uses Ntc 100K 3950 Thermistor, Then This Thermistor Is Plug And Use.
Thermistor Model: Ntc 100K 3950. Here Is The Firmware Setting: *13:100K Hisens 3950 1% Up To 300°C For Hotend "Simple One " &"Hotend "All In One" #Define Temp_Sensor_0 13.
Diy Players Can Also Modify Block By Themselves. Make An M3 Threaded Hole In Blcok, Then You Can Use This Thermistor.
Features
- M3 screw for installation is Quik and Durable, Flexible and Long Lasting, longer life span
- DIY players can also modify BLOCK by themselves. Make an M3 threaded hole in BLCOK, then you can use this thermistor
- Package: 1piece m3 screw in thermistor
- Thermistor model: NTC 100K 3950. HERE is the firmware setting: *13:100k Hisens 3950 1% up to 300 C for hotend Simple ONE &Hotend All In ONE #define TEMP_SENSOR_0 13
- For the printer which uses NTC 100K 3950 thermistor, Then this thermistor is plug and use
- See more on Amazon...
Brand: POLISI3D | Manufacturer: POLISI3D
See On Amazon #7
Official Creality Original Ender 3 S1 Thermistor Sensor 5 Pack, NTC100K 3950K 3D Printer Hotend Replacement Parts Thermistor Temp Sensor Compatible with Sprite Extruder Heater Block
Asin: B09QPH3HMR | Model: HB TH 3S1 | PartNumber: HB TH 3S1
Recommended Parameters For The Thermistor: R25℃=100K B25/50=3950K± 1%.
Designed For Sprite Extruder Standard Kit 260°C, Compatible With Fdm 3D Printer Equipped With Sprite Extruder, Like Ender 3 S1, Ender3 S1 Plus 3D Printer..
There Is A 2-Pin Female Connector On The Thermistor For 3D Printer Sprite Extruder..
The Thermistor Head Size: Φ3x5.5Mm; Cable Length: About 35Mm/ 1.37 Inch..
Features
- 100% Creality Official. Package Include: 5Pcs thermistors.
- The thermistor head size: 3X5.5mm; Cable length: about 35mm/ 1.37 Inch.
- Recommended parameters for the thermistor: R25 =100K B25/50=3950K 1%
- There is a 2-Pin female connector on the thermistor for 3D printer sprite extruder.
- Designed for Sprite Extruder Standard kit 260 C, Compatible with FDM 3D printer equipped with sprite extruder, like Ender 3 S1, Ender3 S1 Plus 3D Printer.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #8
DROK 5Pcs 10k B3950 Temperature Probe, -25 to 125 Degree Celsius Temp Sensor, 3 Meters 9.8 Feet Sensitive Stainless Steel NTC Temperature Sensor Probe
Asin: B01MZ6Y336 | Model: 300458 | PartNumber: 300458
Advanced Technology: Drok Smart Temp Probe Adopts Sensitive And Reliable Ntc Thermistor And Connected By Pvc Wire, 3 Meter Lead Length (9.8Ft), Available For Remote Temperate Measuring And Controlling..
0.
Wide Application: This Multifunctional Test Probes Can Be Used In Household Air Conditioner, Refrigerator, Water Fountain, Drying Box, Constant Box, Etc..
High-Quality Stainless Steel Probe: This Temperature Test Probes Has 5*25Mm Stainless Steel Housing, Which Is Waterproof, Moisture-Proof And Anti-Rust..
Features
- Wide Measuring Range: DROK digital thermometer probe is able to tolerate the widest measuring range (-25 c to 125 c (-13 to 257 )).
- High-quality Stainless Steel Probe: This temperature test probes has 5*25mm stainless steel housing, which is waterproof, moisture-proof and anti-rust.
- Advanced Technology: DROK smart temp probe adopts sensitive and reliable NTC thermistor and connected by PVC wire, 3 meter lead length (9.8ft), available for remote temperate measuring and controlling.
- Wide Application: This multifunctional test probes can be used in household air conditioner, refrigerator, water fountain, drying box, constant box, etc.
- 0
- See more on Amazon...
Brand: DROK | Manufacturer: DROK
Weight: 0.00 pounds
See On Amazon #9
ENOMAKER 24V 40W 620 Ceramic Cartridge Heater and NTC Thermistor 100K 3950 for 3D Printer Creality Ender 3 (Pack of 10pcs)
Asin: B07K2Z3YW4 | Model: ENO-Heater&Thermistor | PartNumber: ENO-Heater&Thermistor | Ean: 0705300790926 | UPC: 705300790926
Voltage: 24V, Power: 40W,Diameter: 6Mm ; Length: 20Mm.
Compatible With Creality Ender 3, Ender 3X, Ender-3 Pro 3D Printer, Etc..
Conviniently Pre-Wired With 1 Meter Long High Temperature Teflon Insulated Wiring.
Temperature Sensor 100Kω Accuracy Of ± 1%.
Features
- Thermistor Color : white,Cartridge Heater Material: 304 Stainless Steel
- Temperature sensor 100K accuracy of 1%
- Voltage: 24v, Power: 40w,Diameter: 6mm ; Length: 20mm
- Conviniently pre-wired with 1 meter long high temperature teflon insulated wiring
- Compatible with Creality Ender 3, Ender 3X, Ender-3 Pro 3d printer, etc.
- See more on Amazon...
Brand: ENOMAKER | Manufacturer: ENOMAKER
See On Amazon #10
HiLetgo 10pcs 3D Printer 100K ohm NTC 3950 Thermistors Sensors with 1m Cable 3D Printers Parts for RepRap Mend Part Temperature Accessories
Asin: B07V6YBFSY | Model: 3-01-1027 | PartNumber: 3-01-1027
Wiring Length: 1 Meter.
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #11
5Pcs Ender 3 Thermistor, NTC 100K Glass Bead Thermistor, 3D Printer NTC 3950 ohm Thermistor Temp Sensor Use for Creality Ender 3,Ender 3 Pro,Ender 3 V2,CR-10,Voxelab Aquila, 2Pin XH2.54,
Asin: B0CL4D5QB8
This 3D Printer Ohm 100K Ntc Thermistor Compatible For Ender 3 /Ender 3 Pro/Ender 3 V2/Ender 5/Ender 5 Plus/Voxelab Aquila/Cr10/Elegoo Neptune 3, Direct Replacement For Sovol Sv1 Bed Thermistor, Etc..
3D Printer Thermistor 1M/39.4 Inches Used For 3D Printer Heated Bed And The Extruder For 3D Printers. It Fits The Standard Size Of An Ender 3 Hot End..
They Are Perfect For The 3D Printer(Ender 3 V2/Ender 3 Pro/Ender 3 Max), But The 1M Wires Are A Bit Short ; So You Need Had To Cut The Thermistor Off And Splice It In And Tape The Splices. Plug And Play With Lerdge K Board For Diy Printer. Don't Forget The Kapton Tape And Insulation Pad..
3D Printer Ntc 100K Ohm 3950 Thermistor Sensors ; Recommended Parameters For The Thermistor: R25℃=100K B25/50=3950K± 1%; Connector : 2Pin Xh2.54..
Features
- Package includes: 5Pcs Upgrade Ender 3 V2 Thermistor, 3D Printer 100k ohm NTC 3950 Thermistor Temp Sensor 1m/39.4 Inches;
- 3D Printer NTC 100K ohm 3950 Thermistor Sensors ; Recommended parameters for the thermistor: R25 =100K B25/50=3950K 1%; Connector : 2pin XH2.54.
- This 3D Printer ohm 100k ntc Thermistor Compatible for Ender 3 /Ender 3 Pro/Ender 3 V2/Ender 5/Ender 5 Plus/Voxelab Aquila/CR10/Elegoo Neptune 3, Direct replacement for Sovol SV1 bed thermistor, etc.
- They are Perfect for the 3d printer(Ender 3 V2/Ender 3 Pro/Ender 3 max), but the 1m wires are a bit short ; so you need had to cut the thermistor off and splice it in and tape the splices. Plug and play with Lerdge K board for DIY printer. Don't forget the Kapton tape and insulation pad.
- 3D Printer Thermistor 1m/39.4 inches Used for 3D Printer Heated Bed and the Extruder for 3D Printers. It fits the standard size of an Ender 3 hot end.
- See more on Amazon...
Brand: TIEXYE | Manufacturer: TIEXYE
See On Amazon #12
3D Printer Thermistor 100k NTC 3950, M3 Stud Thermistor 100k ntc 3950 Temperature Sensor with 1 Meter Extended Cable Wire Use for Ender 3 V2 Pro CR10 and Other 3D Printer Extruder Hotend,
Asin: B0B7B727KB
Applicated To: Almost All Kind Of Heating Block With M3 Thread Hole..
M3 Stud Thermistor Ntc100k Temperature Sensor Use For Creality Ender 3/ Ender 3 V2 /Ender 3 Pro/Ender 3 V2 /Ender 5 Cr10 Cr10s J-Head Hotend.
Beta Value: Ntc100k 3950 Accuracy: 1%.
Working Temperature:Up To 280 ℃. （Comes With Convenient Short Connection With Longer Cable So It Can Be Disconnected Without Unwiring It Completely. ).
Features
- Item Name: M3 Stud Thermistor NTC100K Temperature Sensor with 1 Meter Extended Cable Wire.
- Working temperature:UP to 280 . Comes with convenient short connection with longer cable so it can be disconnected without unwiring it completely. )
- Applicated to: almost all kind of heating block with M3 thread hole.
- Beta Value: NTC100K 3950 Accuracy: 1%
- M3 Stud Thermistor NTC100K Temperature Sensor use for Creality Ender 3/ Ender 3 v2 /Ender 3 Pro/Ender 3 V2 /Ender 5 CR10 CR10s J-Head Hotend
- See more on Amazon...
Brand: SAPLUSREPRAP | Manufacturer: 5Aplusreprap
Dimensions: 0.39 x 4.72 x 3.15 inches
See On Amazon #13
Upgrade 3D Printer NTC 100K 3950 Thermistor, HT-NTC100K Ender 3 Thermistor Sensor and 3D Printer Heater Cartridge Wire 12V40W Compatible for E3D V6 PT100 Ender 3, Ender 3 V2, Ender 5/PRO CR-10,
Asin: B0BX98PQF5 | Model: HCW-HT | PartNumber: HCW-HT
3D Printer Ntc 100K 3950 Thermistor, Ht-Ntc100k Thermistor Sensor, Ender 3 V2 Thermistor Compatible With E3d V6 Volcano Pt100 Ender 3, Ender 3 V2, Ender 5, Cr10 Hotend, Etc..
( Please Notice) After The Product Has Been Opened And Left In The Air For A Long Time, The Copper Metal Part May Change Color, Which Is Normal..
( Ender 3 Thermistor Ht-Ntc100k, Upgrade Ntc 100K 3950 Thermistor) Cartridge Temperature Sensor. Metal Head Diameter: 3Mm, Head Length: 15Mm, Cable Wire Length: 1 Meter,Connector: Xh2.54 2Pin, （Suitable For Heating Blocks With Holes Of 3Mm*15Mm-3Mm*20Mm）.
3D Printer Heater Cartridge Wire 12V 40W Compatible With Creality Ender 3, Ender 3 V2, Ender 3 Pro, Cr10, Mk8 Mk10 V6 Hotend Pt100 Volcano, Etc..
Features
- Package Include :1-Pcs 3D Printer Heater Cartridge Wire 12V 40W, Heating Tube 620mm 1 meter ; 1-Pcs Ender 3 Thermistor, NTC 100K 3950 Thermistor HT-NTC100K Thermistor Sensor 3x15mm (1 meter);
- 3D Printer Heater Cartridge Wire 12V 40W Compatible with Creality Ender 3, Ender 3 v2, Ender 3 pro, CR10, MK8 MK10 V6 Hotend PT100 Volcano, etc.
- 3D Printer NTC 100K 3950 Thermistor, HT-NTC100K Thermistor Sensor, Ender 3 v2 Thermistor Compatible with E3D V6 Volcano PT100 Ender 3, Ender 3 v2, Ender 5, CR10 Hotend, etc.
- ( Ender 3 Thermistor HT-NTC100K, Upgrade NTC 100K 3950 Thermistor) Cartridge temperature sensor. Metal head diameter: 3mm, head length: 15mm, cable wire length: 1 meter,connector: XH2.54 2PIN, Suitable for heating blocks with holes of 3mm*15mm-3mm*20mm
- ( Please Notice) After the product has been opened and left in the air for a long time, the copper metal part may change color, which is normal.
- See more on Amazon...
Brand: SAPLUSREPRAP | Manufacturer: 5Aplusreprap
See On Amazon #14
Elves Ender 3 S1 Thermistor Sensor CR10 Smart Pro, Sermoon V1 Pro 3D Printer Hotend Replacement Parts Thermistor Temp Sensor Compatible with Sprite Extruder Heater Block 3 Pack
Asin: B0C1S68DRV | Ean: 8686254966037
The Probe Of This Thermistor Tube Is Made Of Closed Stainless Steel Sleeve, With Strict Package And Much Higher Quality Than The Common Cartridge Thermistor On The Market..
Warranty: Every Product Passed Qc Before Shipment. But If You Have Problem, We Provide Free Return/Exchange In 90 Days, Please Contact Us..
Package: 3Pcs Thermistors.
Designed For Sprite Extruder Standard Kit 300°C, Compatible With Fdm 3D Printer Equipped With Sprite Extruder, Like Ender 3 S1, Ender 3 S1 Pro, Cr10 Smart Pro, Sermoon V1, Sermoon V1 Pro 3D Printer..
Features
- Thermistor rod size: 3x5mm, about 52mm/ 1.25 Inch, apply imported chip, NTC100K B3950, installed with XH1.25 connector, upgraded, can sensor up to 300 for long time working.
- Designed for Sprite Extruder Standard kit 300 C, Compatible with FDM 3D printer equipped with sprite extruder, like Ender 3 S1, Ender 3 S1 pro, CR10 Smart pro, Sermoon V1, Sermoon V1 Pro 3D Printer.
- The probe of this thermistor tube is made of closed stainless steel sleeve, with strict package and much higher quality than the common cartridge thermistor on the market.
- Package: 3pcs thermistors
- Warranty: Every product passed QC before shipment. But if you have problem, we provide free return/exchange in 90 days, please contact us.
- See more on Amazon...
Brand: Generic | Manufacturer: Elves 3d
See On Amazon #15
3PCS 1.2m Ender 3 Thermistor, 3D Printer NTC 3950 100K Thermistor, HT-NTC100K Thermistor Sensor 3X15mm Compatible for V6 Volcano PT100 Ender 3, Ender 3 v2, Ender 5, CR10, CR10s,
Asin: B0C2JZZYR4
This 1.2M 3D Printer Ntc100k Thermistor Compatible With E3d V6 Volcano Pt100 Ender 3/ Ender 3 V2/ Ender 5 /Ender 5 Pro/ Cr10/ A8 Maker Pro Extruder Hotend，Etc..
Tips：After The Product Has Been Opened And Left In The Air For A Long Time, The Copper Metal Part May Change Color, Which Is Normal..
This 3D Printer Thermistor Metal Head Diameter: 3Mm, Head Length: 15Mm,Compatible With The Heatblocks With 3Mm Hole, Such As: Cr10 Plated Copper High Temperature Heating Block, V6 Volcano Pt100 Type Heated Block,Etc..
This 1.2M 3D Printer Ntc 100K 3950 Thermistor Sensor The Temperature Measurement: -50 °C ~ +300 °C, Can Replace The Original K-Type Thermocouple Temperature Sensor. Fit For Printing High-Temperature Filament..
Features
- 3-Pack HT-NTC100K Thermistor Sensor 1.2m, 3D Printer NTC 100K 3950 Thermistor Upgrade 3mmx15mm, connector: XH2.54 2PIN,
- This 1.2m 3D Printer NTC 100K 3950 Thermistor Sensor The temperature measurement: -50 C ~ +300 C, Can replace the original K-type thermocouple temperature sensor. Fit for printing high-temperature filament.
- This 1.2m 3D Printer NTC100K Thermistor Compatible with E3D V6 Volcano PT100 Ender 3/ Ender 3 V2/ Ender 5 /Ender 5 Pro/ CR10/ A8 Maker Pro Extruder Hotend etc.
- This 3D Printer Thermistor Metal head diameter: 3mm, head length: 15mm,Compatible with the heatblocks with 3mm hole, Such as: CR10 plated copper high temperature heating block, V6 Volcano PT100 type heated block,etc.
- Tips After the product has been opened and left in the air for a long time, the copper metal part may change color, which is normal.
- See more on Amazon...
Brand: Makerzone | Manufacturer: Makerzone
See On Amazon #16
24V 40W 620 Ceramic Cartridge Heater with 3950 100K NTC Thermistor with 1 Meter Wiring for RepRap 3D Printer Heatbed Hot End
Asin: B07RJX7C52 | Model: 10512 | PartNumber: 10512 | Ean: 0701715426160 | UPC: 701715426160
Heater Diameter: 6Mm; Length: 20Mm.
24V 40W 620 Ceramic Cartridge Heater And Ntc Thermistor 100K 3950 For 3D Printer Creality Cr-10S Pro, Cr-X,Ender 3,Ender 3 Pro, Ender 3 V2,Prusa Mendel.
Temperature Sensor 100Kω Accuracy Of ± 1%.
Heater Voltage: 24V, Power: 40W.
Features
- 1 Meter long wire with high temperature PTFE insulated wiring and female pin head, 1.25mmx2.0mm glass bead
- Heater Voltage: 24v, Power: 40w
- Heater Diameter: 6mm; Length: 20mm
- Temperature sensor 100K accuracy of 1%
- 24V 40W 620 Ceramic Cartridge Heater and NTC Thermistor 100K 3950 for 3D Printer Creality CR-10S Pro, CR-X,Ender 3,Ender 3 Pro, Ender 3 V2,Prusa Mendel
- See more on Amazon...
Brand: ACEIRMC | Manufacturer: Organizer
Weight: 0.15 pounds
See On Amazon #17
PATIKIL NTC Thermistors Resistors, 20Pcs 10K Ohm MF52-103 5% Accuracy High Sensitivity Current Limiter Temperature Sensor for Measuring Temperature Black
Asin: B0CH1CC1S6
This Thermistor Can Facilitate Your Daily Temperature Measurement And Is Widely Used In Electrical Equipment, Household Appliances, Air Conditioning Equipment, Control Motors, Electric Water Heaters, Heaters, Bulb Regulators, Etc..
Note: Please Confirm The Specification Of Thermistors Resistors According To Your Needs Before Your Order..
Instruction: Just Contact The Machine..
Advantage: Made Of Durable Materials, It Has Good Stability And Long Service Life; Moreover, It Is Light And Compact, Can Measure Some Small Electrical Appliances, Flexibly Pass Through Narrow Gaps, And Is Easy To Carry Out. Sensitive Temperature Measurement: It Is Sensitive, Has A Large Temperature Coefficient Of Resistance, And Can Measure Temperature Changes From 10 °C To 6 °C.; Wide Working Temperature Range: It Can Be Applied To Work At -55°C ~ 315°C..
Features
- Specification: Model: NTC-MF52-103; Resistance Value at 25 : 10K Ohm; B Value: 3950; Measurement Accuracy: 5%; Pin Length: 28mm / 1.1inch; Pin Pitch: 1.7mm / 0.07inch; Operating Temperature: -55 315 ; Head Diameter: 2mm / 0.08inch; Package List: 20 x Thermistors Resistors
- Advantage: Made of durable materials, it has good stability and long service life; Moreover, it is light and compact, can measure some small electrical appliances, flexibly pass through narrow gaps, and is easy to carry out. Sensitive Temperature Measurement: it is sensitive, has a large temperature coefficient of resistance, and can measure temperature changes from 10 C to 6 C.; Wide working temperature Range: It can be applied to work at -55 C ~ 315 C.
- This thermistor can facilitate your daily temperature measurement and is widely used in electrical equipment, household appliances, air conditioning equipment, control motors, electric water heaters, heaters, bulb regulators, etc.
- Instruction: Just contact the machine.
- NOTE: Please confirm the specification of thermistors resistors according to your needs before your order.
- See more on Amazon...
Brand: PATIKIL | Manufacturer: PATIKIL
See On Amazon #18
XINGYHENG 10Pcs NTC 10K Thermistor Sensors Digital Temperature Probe for Air Conditioner (100cm)
Asin: B078SQH536 | Model: XLX-1516 | PartNumber: XLX-1516 | Ean: 0714973095054 | UPC: 714973095054
3.Cable Length: 100Cm/ 3.3Ft. Package:10Pcs.
5.The Significant Feature: Rapid Response, Durable, High Sensitivity, Compact Structure, Easy Installation, Good Water Resistance, Wide Temperature Range Of Application, Good Stability, High Reliability..
4.Size Of Probe: 5Mm/0.2In*25Mm/0.98In(Diameter*Length). Size Of Terminal: For Xh2.54-2P.
2.Suitable Temperature Range: -20°C ~ +105°C.
Features
- 1.Product type: NTC 10K 1% temperature probe
- 2.Suitable temperature range: -20 c ~ +105 c
- 3.Cable length: 100cm/ 3.3ft. Package:10Pcs
- 4.Size of probe: 5mm/0.2in*25mm/0.98in(Diameter*Length). Size of terminal: For XH2.54-2P
- 5.The significant feature: Rapid response, durable, high sensitivity, compact structure, easy installation, good water resistance, wide temperature range of application, good stability, high reliability.
- See more on Amazon...
Brand: XINGYHENG | Manufacturer: XLX
See On Amazon #19
Elves Sprite Extruder Pro Kit 300 Heater 24V 40W Thermistor High Temperature Sensor for Ender 3 S1/ CR10 Smart Pro 3D Printer (Heating Tube+Thermistor)
Asin: B0C1S8XT91 | Ean: 8686254966075
【Wide Compatible】: The Product Is Compatible With Lab X1 P1p 3D Printer, High Temperature Kit Is Widely Compatible With Various Printing Filament Materials, Such As Pla, Abs, Pteg, Tpu, Pp, Pc, Nylon, Pedk, Pei, And Other Materials..
【Product List】: 1 Set Of Hardened Steel Nozzle Full Metal Hotend Kit+ 2 Hotend Silicone Cover +1 Extra Hardened Steel Nozzle +1Extra Snap + 24V Ceramic Heater Thermistor.
【Design Upgrade】: This Kit Is Upgraded, The Heating Block Upgraded To Chromium-Zirconium Copper Nickel Plating Treatment, High Temperature Resistance Printing, Fast Heat Conduction. The Throat Structure Is Upgraded Also, And The Step Limit Is Added To Cooperate With The Heating Block, Which Perfectly Solves The Problems Of Leakage And Falling Off..
【Upgrade Nozzle】: The Nozzle Is Made Of Hardened Steel And Quenched And Hardened To Make It More Wear-Resistant And Extend Its Service Life; The Inner Wall Roughness Of The Throat And Nozzle Is 0.4Mm, Which Reduces The Phenomenon Of Blockage And Improves The Printing Quality; The Nozzle Structure Is Upgraded, Can Be Disassembled And Replaced, Reducing The Use Cost..
Features
- All Metal Design : The heater block is upgraded from brass to chromium-zirconium copper nickel-plated, which is small in size and light in weight, and can withstand high temperature up to 500 , with faster thermal conductivity.
- Upgrade Nozzle : The nozzle is made of hardened steel and quenched and hardened to make it more wear-resistant and extend its service life; the inner wall roughness of the throat and nozzle is 0.4MM, which reduces the phenomenon of blockage and improves the printing quality; the nozzle structure is upgraded, can be disassembled and replaced, reducing the use cost.
- Wide Compatible : The product is compatible with Lab X1 P1P 3D Printer, High Temperature kit is widely compatible with various printing filament materials, such as PLA, ABS, PTEG, TPU, PP, PC, Nylon, PEDK, PEI, and other materials.
- Design Upgrade : This Kit is Upgraded, the heating block upgraded to chromium-zirconium copper nickel plating treatment, high temperature resistance printing, fast heat conduction. The throat structure is upgraded also, and the step limit is added to cooperate with the heating block, which perfectly solves the problems of leakage and falling off.
- Product List : 1 set of hardened steel nozzle full metal hotend kit+ 2 Hotend Silicone Cover +1 Extra Hardened Steel Nozzle +1Extra Snap + 24V Ceramic Heater Thermistor
- See more on Amazon...
Brand: Generic | Manufacturer: Elves 3d
See On Amazon #20
uxcell 50PCS NTC Thermistors Resistors MF58 3950B 10K Ohm Glass Sealed Temperature Sensors
Asin: B07P5Q67RH | Model: a18112200ux0729 | PartNumber: a18112200ux0729
Performance: High Precision Resistance, B Values With High Reliability And Stability, High Sensitivity.
Package: 50(+/-2%) Piece X Electrical Axial Lead Ntc Thermistors Resistors.
Application: Suitable For Related Equipment With Temperature Measurement And Controls Thermal Protection Circuits In Various Family Appliances.
Design: Glass Sealed Packaging With Firm Structure, Small Size And Light Weight, Applicable In Severe Environments.
Features
- FEATURES: MF58 10K Ohm NTC Thermistors with B Value: 3950(+/-1%)
- DESIGN: Glass sealed packaging with firm structure, small size and light weight, applicable in severe environments
- PERFORMANCE: High precision resistance, B values with high reliability and stability, high sensitivity
- APPLICATION: Suitable for related equipment with temperature measurement and controls thermal protection circuits in various family appliances
- PACKAGE: 50(+/-2%) Piece x Electrical Axial Lead NTC Thermistors Resistors
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.39 x 3.54 x 2.36 Inches
See On Amazon
Looking For Something Else?
Search