HzdaDeve Hotend for Prusa I3 MK4/XL Print Head Heater Block 0.4MM Hardened Steel Nozzle 24V 40W Heating Cartridge Thermistor Silicone Cover Extruder Kit Printhead with Extra 2 Pack Brass Nozzles
Asin: B0D2VP9YB9 | Model: hot end for Prusa I3 MK4 | PartNumber: hot end for Prusa I3 MK4
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Tungsten Carbide Coated: It Has A Strong Adsorption Capacity, Effectively Preventing Molten Plastic From Sticking To The Nozzle..
Simple Installation: Remove The Old Hot End And Install The New Hotend To Start. (Heating Tube, Thermistor, Nozzle Etc Are Pre-Installed).
Filament Material: The Print Head For Prusa I3 Mk4 Works With 1.75 Mm Pla/Abs/Petg/Tpu/Wood Filament..
Premium Nozzle Quality: Mk6 Hardened Nozzles Are Made Of High-Quality Stainless Steel. The Nozzle Is Not Easy To Stick Filament With High Hardness, Resistant To Wear And Tear..
Package Included: 1 Set Hotend Kit (Heater Cartridge, Thermistor, Heat Block,Throat Tube, Nozzle, Silicone Cover) + 2Pk Brass Nozzles..
Features
- Notice: This hotend kit replacement is compatible with Prusa I3 MK4 FDM 3D printer.
- Package Included: 1 set hotend kit (heater cartridge, thermistor, heat block,throat tube, nozzle, silicone cover) + 2PK brass nozzles.
- Tungsten Carbide Coated: It has a strong adsorption capacity, effectively preventing molten plastic from sticking to the nozzle.
- Premium Nozzle Quality: MK6 hardened nozzles are made of high-quality stainless Steel. The nozzle is not easy to stick filament with high hardness, resistant to wear and tear.
- Simple Installation: Remove the old hot end and install the new hotend to start. (Heating tube, thermistor, nozzle etc are pre-installed)
- Filament material: The print head for Prusa I3 MK4 works with 1.75 mm PLA/ABS/PETG/TPU/Wood filament.
- See more on Amazon...
Brand: HzdaDeve | Manufacturer: HzdaDeve hotend for I3 MK4
See On Amazon Similar To HzdaDeve Hotend for Prusa I3
#1
Creality Ender 3 /Pro/V2 3D Printer Assembled Extruder MK8 HotEnd Kit 24V with 0.4mm Nozzle Upgrade with Low Friction Creality-Capricorn Tubing
Asin: B07WNQP916 | Model: ENO-Ender3-Hotend-Bluetube | PartNumber: ENO-Ender3-Hotend-Bluetube | Ean: 0705300791497, 0198549003108 | UPC: 705300791497, 198549003108
Hotend Replacement Parts Suitable For Ender 3, Ender-3X, Ender-3 Pro, Ender 3 V2 3D Printer..
Creality-Capricorn Tube Is Far Superior To The White Ptfe Tubing Supplied With Most 3D Printers. Its Much Smoother To Feed Filament Through. And When Printing It Reduces The Drag On The Extruder Giving A Much Smoother Travel And Print Quality..
High Lubricity Additives Make Our Xs Series Tubing The Lowest Friction Bowden Tubing On The Market. Less Friction Means More Responsiveness, Less Retraction, More Accurate Prints, Less Slippage, Wear, And Tear On The Extruder, And Less Clogging When Printing Chunky Filaments Such As Some Woodfills Or Ironfills. Lower Retraction Means Time Saved Every Time The Extruder Retracts. Over The Course Of A Print, A Few Milliseconds Here And A Few There Add Up To A Lot Of Time Saved..
Upgrade With Low Friction Creality-Capricorn Original Teflon Tube 40Cm..
Features
- It's 100% Creality Original and Creality-Capricorn PTFE Tubing.
- Upgrade with Low Friction Creality-Capricorn Original Teflon Tube 40CM.
- Hotend replacement parts suitable for ender 3, ender-3x, ender-3 pro, Ender 3 V2 3d printer.
- High Lubricity Additives make our XS Series tubing the lowest friction Bowden tubing on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills. Lower retraction means time saved every time the extruder retracts. Over the course of a print, a few milliseconds here and a few there add up to a lot of time saved.
- Creality-Capricorn tube is far superior to the white PTFE tubing supplied with most 3D printers. Its much smoother to feed filament through. And when printing it reduces the drag on the extruder giving a much smoother travel and print quality.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #2
Creality Upgrade Ender 3 Hotend, Assembled Extruder with Capricorn Bowden PTFE Tubing for Creality Ender 3 Pro/Ender 3 V2 with Silicone Cover 3, 0.4mm Ender 3 Nozzle 3 and 2 Pair Pneumatic Couplers
Asin: B082PGCF2B | Model: ENDER3-PT | PartNumber: ENDER3-PT
Pluggable: The Heating Tube And Temperature Thermistor That From Control Box, Connect Them With Terminal Housing And Pin. Then You Could Plug The Hotend Kit, Easier To Replace Hotend Kit..
Mk8 Extruder Hot End Kit, White Wire Was Temperature Thermistor, Braided Wire Was Heating Tube 24V40w..
With More Terminal Housing And Pins As Spare Parts, In Case Fail Installation And Waste..
Original Capricorn Xs Serious Bowden Ptfe Tubing With Lowest Friction On The Market. Less Friction Means More Responsiveness, Less Retraction, More Accurate Prints, Less Slippage, Wear, And Tear On The Extruder, And Less Clogging When Printing Chunky Filaments Such As Some Woodfills Or Ironfills..
Features
- It's 100% Creality Original Upgrade Assembled Extruder Hotend.
- Original Capricorn XS Serious Bowden PTFE tubing with lowest friction on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills.
- Pluggable: the heating tube and temperature thermistor that from control box, connect them with terminal housing and pin. Then you could plug the hotend kit, easier to replace hotend kit.
- With more terminal housing and pins as spare parts, in case fail installation and waste.
- MK8 Extruder Hot End kit, white wire was temperature thermistor, braided wire was heating tube 24V40W.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Weight: 0.30 Pounds
See On Amazon #3
Ender 3 Hotend, Authentic Creality Assembled Hotend Kit 3D Printer Parts with 5X 0.4mm Nozzles for Ender 3 Ender 3 V2 and Ender 3 Pro
Asin: B082XXRT78 | Model: Sprinkler Kit -01 | PartNumber: Sprinkler Kit -01 | Ean: 8711459631234
Mk8 Extruder Hot End Kit, White Wire Was Temperature Thermistor, Braided Wire Was Heating Tube 24V 40W. Tip Of The Nozzle, Aluminum Heating Block, Throat Pipe (Built-In Teflon)..
Silicone Cover Is Provided To Help Keep Temperatures On The Hotend Much More Stable And This Will Result In Higher Print Quality And Consistency..
Five 0.4Mm Brass Nozzle Are Included In This Hotend Kit. This Kit Can Work With Different Sizes Of Mk8 Nozzle: 0.2Mm/0.3Mm/0.4Mm/0.5Mm /0.6Mm/0.8Mm/1.0Mm..
Pluggable: The Heating Tube And Temperature Thermistor That From Control Box, Connect Them With Terminal Housing And Pin. Then You Could Plug The Hotend Kit, Easier To Replace Hotend Kit..
Features
- Compatibility: 100% Creality Original. This assembled hotend kit from Creality is a plug and play replacement for Ender 3/ Ender 3 V2 /Ender 3 Pro/ Ender 3S.
- Pluggable: the heating tube and temperature thermistor that from control box, connect them with terminal housing and pin. Then you could plug the hotend kit, easier to replace hotend kit.
- MK8 extruder hot end kit, white wire was temperature thermistor, braided wire was heating tube 24V 40W. Tip of the nozzle, aluminum heating block, throat pipe (built-in teflon).
- Five 0.4mm brass nozzle are included in this hotend kit. This kit can work with different sizes of MK8 nozzle: 0.2mm/0.3mm/0.4mm/0.5mm /0.6mm/0.8mm/1.0mm.
- Silicone Cover is provided to help keep temperatures on the hotend much more stable and this will result in higher print quality and consistency.
- See more on Amazon...
Brand: ORTHLAND | Manufacturer: Orthland
See On Amazon #4
HzdaDeve Hotend Hot End Print Head Extruder Kit with 2PK Heater Block Cover and 2PK Stainless Steel Hardened Nozzles for Anycubic Kobra 2/Kobra 2 Neo/Kobra 2 Pro/Kobra 2 Plus/Kobra 2 Max 3D Printer
Asin: B0CLNGYS3C
Simple Installation: Remove The Old Hot End And Install The New Hotend To Start. (Heating Tube, Thermistor, Nozzle Etc Are Pre-Installed).
High Speed: It's A Special Volcano Design So The Print Head Heats Evenly. The Interior Of The Nozzle Is Smooth Without Burry, Which Not Only Reduces Air Resistance And Prevents The Filament From Jamming, But Supports High-Speed Printing..
Filament Material: The Print Head For Kobra 2 Pro Works With 1.75 Mm Pla/Abs/Petg/Tpu/Wood Filament..
Package Included: 2Pcs Silicone Cover + 1Pc Hardened Nozzle + 1Pc Brass Nozzle + 1 Set Hotend Kit (Heater Cartridge, Thermistor, Heat Block,Throat Tube, Nozzle).
Features
- Notice: This hotend kit replacement is only compatible with Anycubic Kobra 2/Kobra 2 Neo/Kobra 2 Pro/Kobra 2 Plus/Kobra 2 Max FDM 3D printer.
- Package Included: 2PCS silicone cover + 1PC Hardened Nozzle + 1PC Brass Nozzle + 1 set hotend kit (heater cartridge, thermistor, heat block,throat tube, nozzle)
- Simple Installation: Remove the old hot end and install the new hotend to start. (Heating tube, thermistor, nozzle etc are pre-installed)
- Filament material: The print head for Kobra 2 Pro works with 1.75 mm PLA/ABS/PETG/TPU/Wood filament.
- High Speed: It's a special volcano design so the print head heats evenly. The interior of the nozzle is smooth without burry, which not only reduces air resistance and prevents the filament from jamming, but supports high-speed printing.
- See more on Amazon...
Brand: HzdaDeve | Manufacturer: HzdaDeve hotend kit replacement for Anycubic Kobra 2 Pro
See On Amazon #5
Creality Official Ender 3 V3 KE Ceramic Hotend Kit, Ender 3 V3 KE Ceramic Heating Block Kit, 300 C High Temperature Resistance Extruder Hot End, All Metal Thermal Conductivity Hotend Replacement
Asin: B0CRDQGR3F
Faster Printing Experience - Ender 3 V3 Ke Assembled Extruder Hot End Kit Has Been Assembled In Advance , All You Have To Do Is Plug In The Wires. Ender 3 V3 Ke 3D Printer Can Print At Up To 600Mm/S Speed , Faster Than Most Of Printers On The Market. You Can Complete Models Efficiently, Saving Time To Wait For Print Jobs..
All-Metal Design - Support 300℃ High Temperature Printing. Compatible With More Filaments, Such As Pla, Abs, Petg, Tpu, Pa, Pc, Pla-Cf, Pa-Cf, Pet-Cf, Etc..
Process Upgrades For Better Printing - The Throat Is Made Of Titanium Alloy, Thin-Walled And Thick Throat, Brings Excellent Heat Insulation Performance. A0.4 High Thermal Conductivity Uniform Heating - Ceramic Heating Ring For Improved Heating Efficiency And Faster Heat Transfer, More Uniform Heating..
Features
- Ender 3 V3 KE Ceramic Hotend Kit - 100% Creality official heating block kit, compatible for Creality Ender 3 V3 KE 3D Printer.
- High Thermal Conductivity Uniform Heating - Ceramic heating ring for improved heating efficiency and faster heat transfer, more uniform heating.
- Faster Printing Experience - Ender 3 V3 KE assembled extruder hot end kit has been assembled in advance , all you have to do is plug in the wires. Ender 3 V3 KE 3d printer can print at up to 600mm/s speed , faster than most of printers on the market. You can complete models efficiently, saving time to wait for print jobs.
- Process Upgrades for Better Printing - The throat is made of titanium alloy, thin-walled and thick throat, brings excellent heat insulation performance. a0.4
- All-metal Design - Support 300 high temperature printing. Compatible with more filaments, such as PLA, ABS, PETG, TPU, PA, PC, PLA-CF, PA-CF, PET-CF, etc.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
See On Amazon #6
ANYCUBIC Vyper/Kobra Max/Kobra Plus 3D Printer Hotend Replacement Volcano V5 J-Head Quality Brass Nozzle 24V40W Ceramic Heating Cartridge Element Supports High Speed Printing
Asin: B09DKQ98L3 | Ean: 0770490052598 | UPC: 770490052598
【Plug And Play】: Both Of The Thermistor And Heating Rod Come With Connector, No Wiring And Peeling Works.So This V5 J-Head Hotend Will Be Quite Easy To Install On Anycubic Vyper 3D Printer..
【High-Accurate Brass Nozzle】: With Original High-Accurate Anycubic Brass Nozzle,It Can Provide Smoother Printing,Thus Having Better Printing Result..
【Filament Compatibility】: The 24V Volcano Hot End Works Great With 1.75Mm Pla/Abs/Wood/Petg/Tpu..
【Volcano Hotend Design】: The Print Head Heats Evenly Because Of The Special Volcano Hotend Nozzle Design ,Filament Flows Smoothly In Throat Nozzle ,And It Supports High Speed Printing..
Features
- Application : This hotend replacement is ONLY compatible with ANYCUBIC Vyper/Kobra Max/Kobra Plus 3d printer.It will NOT work with Kobra Neo or Kobra Go.
- Volcano Hotend Design : The print head heats evenly because of the special Volcano hotend nozzle design ,filament flows smoothly in throat nozzle ,and it supports high speed printing.
- Plug and Play : Both of the thermistor and heating rod come with connector, no wiring and peeling works.So this V5 J-head hotend will be quite easy to install on ANYCUBIC Vyper 3D printer.
- Filament Compatibility : The 24V Volcano hot end works great with 1.75mm PLA/ABS/WOOD/PETG/TPU.
- High-accurate Brass Nozzle : With original high-accurate Anycubic brass nozzle,it can provide smoother printing,thus having better printing result.
- See more on Amazon...
Brand: UniTak3D | Manufacturer: UniTak3D
Dimensions: 4.90 x 1.00 x 4.40 Inches | Weight: 0.13 pounds
See On Amazon #7
Creality Official Ender 3 V3 SE Hotend Kit, 260 High-Temperature Resistance Hotend Heater Block, 250mm/s High-Speed Assembled Extruder Hot End Kit with Silicone Sock for Ender 3 V3 SE 3D Printer
Asin: B0CKXNZCP4
High Temperature Resistance - Up To 260℃ High Temperature To Accomplish Better Effect Of Printing With High Temperature Filaments. Ender 3 V3 Se Hotend Heater Block Part Is Compatible With Various Filaments Such As Pla, Abs, Petg, Tpu, Pp, Pc, Nylon, Etc..
After-Sales Service - If You Have Any Unsolvable Problems During Installation Or Use Our Ender 3 V3 Se 3D Printer Accessories, Please Feel Free To Tell Us, And Our After-Sales Technical Team Will Provide You With Detail Solutions Within 24 Hours..
Fast Heat Dissipation - The Heat Block And Nozzle Are Made Of Copper Alloy, Effective Isolation Of Heating And Heat Dissipation Reduces Clogging And Improves Print Success Rates, It Is Easy To Install. The Roughness Of Ra0.3 On The Inner Wall Of The Nozzle To Improve Print Quality..
Faster Printing Experience - Ender 3 V3 Se Assembled Extruder Hot End Kit Has Been Assembled In Advance , All You Have To Do Is Plug In The Wires. Ender 3 V3 Se 3D Printer Can Print At Up To 250Mm/S Speed , Faster Than Most Of Printers On The Market. You Can Complete Models Efficiently, Saving Time To Wait For Print Jobs..
Features
- Package List - 100% Original Creality Ender 3 V3 SE hotend kit. The extruder hotend kit include: Ender 3 V3 SE hotend hotend kit*1, Insulation silicone Sleeve*1, and white bowden tube*1.
- Faster Printing Experience - Ender 3 V3 SE assembled extruder hot end kit has been assembled in advance , all you have to do is plug in the wires. Ender 3 V3 SE 3d printer can print at up to 250mm/s speed , faster than most of printers on the market. You can complete models efficiently, saving time to wait for print jobs.
- High Temperature Resistance - Up to 260 High Temperature to accomplish better effect of printing with high temperature filaments. Ender 3 V3 SE hotend heater block Part is compatible with various filaments such as PLA, ABS, PETG, TPU, PP, PC, Nylon, etc.
- Fast Heat Dissipation - The heat block and nozzle are made of copper alloy, Effective isolation of heating and heat dissipation reduces clogging and improves print success rates, it is easy to install. The roughness of Ra0.3 on the inner wall of the nozzle to improve print quality.
- After-sales Service - If you have any unsolvable problems during installation or use our Ender 3 V3 SE 3d printer accessories, please feel free to tell us, and our after-sales technical team will provide you with detail solutions within 24 hours.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
See On Amazon #8
Creality Ender 3 V3 KE Ceramic Hotend Kit, 300 C High Temperature Heating Block Replacement All Metal High Thermal Conductivity Extruder Hot End
Asin: B0CZQ1BCX7
【Boosted Speed (Faster Printing Experience)】The Pre-Assembled Ender 3 V3 Ke Extruder Hotend Kit Simplifies Installation—Just Plug In The Wires. With A Maximum Printing Speed Of 600Mm/S, Enabling Efficient Model Completion And Reducing Waiting Time For Print Jobs..
Our Dedicated Technical Support Team Is Available To Assist You With Any Installation Concerns..
【Versatile Compatibility (All-Metal Design)】Supporting High-Temperature Printing Up To 300℃, The All-Metal Design Ensures Compatibility With Various Filament Such As Pla, Abs, Petg, Tpu, Pa, Pc, Pla-Cf, Pa-Cf, Pet-Cf, And More, Expanding The Possibilities For Your Printing Projects..
【Tips Of Installation】This Kit Is The Ender 3 V3 Ke 3D Printer Stock Hotend Kit. There Might Be Dried Thermal Grease In The Holes Of The Heat Sink On The Hot End, Which Makes It Difficult To Install. You Can Use A Slightly Larger Flathead Screwdriver To Scrape Off The Dried Thermal Grease Inside The Holes, And Then Install This Hotend Kit..
【Enhanced Precision (Process Upgrades For Better Printing)】The Titanium Alloy Throat Brings Exceptional Heat Insulation Performance While Maintaining A Nozzle Inner Wall Roughness ≤Ra0.4, Facilitating Smoother Filament Discharge. This Results In Superior Print Quality And Improved Overall Performance..
【Accelerated Heat Transfer (High Thermal Conductivity Uniform Heating)】Featuring A Ceramic Heating Ring, This Kit Enhances Heating Efficiency, Expediting Heat Transfer And Achieving More Uniform Heating For Consistent Printing Quality..
Features
- 100% Creality ender 3 V3 KE Ceramic Hotend Kit Original heating block kit replacement for Creality Ender 3 V3 KE 3D Printer.
- Accelerated Heat Transfer (High Thermal Conductivity Uniform Heating) Featuring a ceramic heating ring, this kit enhances heating efficiency, expediting heat transfer and achieving more uniform heating for consistent printing quality.
- Boosted Speed (Faster Printing Experience) The pre-assembled Ender 3 V3 KE extruder hotend kit simplifies installation just plug in the wires. With a maximum printing speed of 600mm/s, enabling efficient model completion and reducing waiting time for print jobs.
- Enhanced Precision (Process Upgrades for Better Printing) The titanium alloy throat brings exceptional heat insulation performance while maintaining a nozzle inner wall roughness Ra0.4, facilitating smoother filament discharge. This results in superior print quality and improved overall performance.
- Versatile Compatibility (All-metal Design) Supporting high-temperature printing up to 300 , the all-metal design ensures compatibility with various filament such as PLA, ABS, PETG, TPU, PA, PC, PLA-CF, PA-CF, PET-CF, and more, expanding the possibilities for your printing projects.
- Tips of Installation This kit is the Ender 3 V3 KE 3d printer stock hotend kit. There might be dried thermal grease in the holes of the heat sink on the hot end, which makes it difficult to install. You can use a slightly larger flathead screwdriver to scrape off the dried thermal grease inside the holes, and then install this hotend kit.
- Our dedicated technical support team is available to assist you with any installation concerns.
- See more on Amazon...
Brand: ENOMAKER | Manufacturer: Creality
See On Amazon #9
5Aplusreprap Ender 3 Hotend Upgrade - M3 Stud Thermistor,Fast Replaced, Compatible for Creality Ender 3 V2/Pro,CR-10 J-Head Hotend Replacement, Assembled Extruder 3D Printer Hot end Kit 24V 40W
Asin: B09QMBMB6S | Model: HTK-24V50W-1set | PartNumber: HTK-24V50W-1set
Advantages: Heater Wire And Thermistor Wire Are With Fast Replace Plug Connectors,Easier To Fast Replace Or Remove The Hotend In Any Cases. Heated Block Was Staby To The Heatsink With The Titanium Alloy Screw,Which Thermal Conductivity Is Lower Than Stainless Steel Screw, Therefore Less Heat Is Conducted To The Heat Sink..
Tips: It Is Suggested To Re-Check The Heatbed Level After Install The New Hotend Or Nozzle, To Avoid The Nozzle Scratch Heatbed. Screw This Termistor In The Heated Block By Hand, Not By Tool..
Compatible With 3D Printer Models: Creality Cr-10, Creality Cr-10-S5, Creality Cr-10-S4, Creality Cr-10S, Creality Cr-10 Mini, Creality Cr-20, Creality Cr-20 Pro, Ender 2, Ender 3, Ender 3 V2, Ender 3 Pro, Ender 5, Xy X5s, Tevo Tornado, Alfawise U20, Lotmaxx Sc-10, Etc..
Staby Temperature Sensor: Different From Other Hotends, This Hotend Uses An Upgraded M3 Stud Ntc 100K Thermistor, Which Better Keeps The Thermistor Firmly Fixed To The Heated Block While Printhead Is Moving. Thermistor Was Sealed With High Temperature Glue And Insulation With Fiberglass, To Ensure More Effective Temperature Resistance To Prevent Short Circuit At 250℃ Temperature..
Features
- Package Includes: 1 x Ender 3 Hotend, CR10 J-head Hotend kit with M3 stud-in NTC 3950 100K Thermistor and 24v 40w heater wire, 5 x 0.4mm brass nozzle, 3 x ender heated block silicone case, 2 x aluminum heated block, 1 x wrench tool.
- Staby Temperature Sensor: Different from other hotends, this hotend uses an upgraded M3 stud NTC 100K thermistor, which better keeps the thermistor firmly fixed to the heated block while printhead is moving. Thermistor was sealed with high temperature glue and insulation with fiberglass, to ensure more effective temperature resistance to prevent short circuit at 250 temperature.
- Advantages: Heater wire and thermistor wire are with fast replace plug connectors,easier to fast replace or remove the hotend in any cases. Heated block was staby to the heatsink with the titanium alloy screw,which thermal conductivity is lower than stainless steel screw, therefore less heat is conducted to the heat sink.
- Compatible with 3D Printer Models: Creality CR-10, Creality CR-10-S5, Creality CR-10-S4, Creality CR-10S, Creality CR-10 MINI, Creality CR-20, Creality CR-20 Pro, Ender 2, Ender 3, Ender 3 V2, Ender 3 Pro, Ender 5, XY X5S, Tevo Tornado, Alfawise U20, Lotmaxx SC-10, etc.
- Tips: It is suggested to re-check the heatbed level after install the new hotend or nozzle, to avoid the nozzle scratch heatbed. Screw this termistor in the heated block by hand, not by tool.
- See more on Amazon...
Brand: SAPLUSREPRAP | Manufacturer: 5Aplusreprap
Dimensions: 1.20 x 3.50 x 5.20 inches | Weight: 0.28 pounds
See On Amazon #10
HICTOP Ender 3 Hotend Ender 3 Pro Hotend 24V 40W Full Assembled Extruder Kit Accessories with Silicone Cover for Ender 3, Ender 3 Pro 3D Printer
Asin: B08R77QLS1 | Model: extruder kit-ender 3 | PartNumber: extruder kit-ender 3 | Ean: 0649910011463 | UPC: 649910011463
3 There Are 2 Fans, Fan Covers, Heat Block, Cooling Block, Nozzle, Throat Pipe, Connector, Teflon Pipe, Thermistor Sensor, Heating Tube, Screws, Silicone Cover, Etc..
5. Silicone Cover Is Provided To Help Keep Temperatures On The Ender 3 Hotend Much More Stable And This Will Result In Higher Print Quality And Consistency.
4 24V High Speed Fan, Lose Heat Quickly And Efficiently; Nozzle And Tube Connect Seamless, Prevent Material Leaking And Blocking..
2 Compatible With Ender 3, Ender 3 Pro And Similar 3D Printer But Not For Ender 3 Neo..
Features
- 1 Ender 3 hotend, Plug and Play Ender 3 Pro Hotend, you do not need to cut it.
- 2 Compatible with Ender 3, Ender 3 Pro and similar 3D printer but not for ender 3 Neo.
- 3 There are 2 fans, fan covers, heat block, cooling block, nozzle, throat pipe, connector, teflon pipe, thermistor sensor, heating tube, screws, silicone cover, etc.
- 4 24V high speed fan, lose heat quickly and efficiently; nozzle and tube connect seamless, prevent material leaking and blocking.
- 5. Silicone Cover is provided to help keep temperatures on the Ender 3 hotend much more stable and this will result in higher print quality and consistency
- See more on Amazon...
Brand: HICTOP | Manufacturer: HICTOP
Dimensions: 3.15 x 5.50 x 4.69 inches | Weight: 0.37 pounds
See On Amazon #11
3D Printer Parts Ender 3 Hotend Assembled Ender 3 Pro Extruder Kit 24V 40W for Creality Ender 3 / Ender 3 Pro/Ender 3 V2 with Silicon Cover and 0.4mm Nozzles
Asin: B07H8TSM95 | Model: Ender 3-Extruder | PartNumber: Ender 3-Extruder | Ean: 0608410981676 | UPC: 608410981676
Ender 3 Extruder Hot End Can Work With Different Size Mk8 Nozzle: 0.2Mm 0.3Mm 0.4Mm 0.5Mm 0.6Mm 0.8Mm 1.0Mm Nozzle.
Tip Of Nozzle, Aluminum Heating Block, Throat Pipe (Built-In Teflon).
Mk8 Extruder Hot End Kits,White Wire Was Temperature Thermistor, Black Wire Was Heating Tube 24V 40W.
5 Pieces 0.4Mm 3D Printers Nozzles As Gift..
Features
- ENDER 3 EXTRUDER is 100% ORIGINAL CREALITY 3D PRINTINGE PRINTERS PARTS /ACCESSORIES AND WITH HIGH QUALITY, WE JUST CONFIRM IT WORKS WITH CREALITY ENDER 3 3D PRINTERS. OTHERS BRANDS WE DO NOT TEST IT.
- 5 PIECES 0.4MM 3D PRINTERS NOZZLES AS GIFT.
- ENDER 3 EXTRUDER HOT END CAN WORK WITH DIFFERENT SIZE MK8 NOZZLE: 0.2MM 0.3MM 0.4MM 0.5MM 0.6MM 0.8MM 1.0MM NOZZLE
- MK8 EXTRUDER HOT END KITS,WHITE WIRE WAS TEMPERATURE THERMISTOR, BLACK WIRE WAS HEATING TUBE 24V 40W
- TIP OF NOZZLE, ALUMINUM HEATING BLOCK, THROAT PIPE (BUILT-IN TEFLON)
- See more on Amazon...
Brand: RICHOOSE | Manufacturer: Creality 3D
See On Amazon #12
FYSETC Prusa 3D Printer Accessory - MK4 Heater Block Silicone Sock: Easy Install Hotend Part Insulate Protect Hot End Nozzle Print Head Silicone Cover Compatible with Prusa MK3.9 XL - Black, Pack of 4
Asin: B0CT7GDT17
3. Package Contents: Nice Set Of Silicone Covers To Keep Your Blocks Clean. Easy Installation, Just Slip It On. It's A Must-Have To Keep A Few Extra Covers At Hand When You Don't Just Have A Single Nozzle/Block. It's Easier To Keep Your Mk4 Nozzles Paired With A Block, Thermistor, And Heater For Faster Changes. Of Course, That Includes These Silicone Covers. It Keeps Heat Block From Further Messes. Maintain The Hotend Temperature Stable And Provides Protection From Failed 3D Printing Projects..
5.High Temperature Resistance For 3D Printer Material: With This Sock You Can Safely Print More Exotic Materials Such As Petg At Higher Temperatures While Also Using The Cooling Fans At Full Speed. Actively Keeping The Hotend Very Hot And Cooling The Petg Much Quicker Before It Is Laid Onto The Hotbed Can Help With Success Rates On More Prints. If Need Mk4 Nextruder Nozzle Hot Bed Thermistor Heater Block, Nextruder V6 Nozzle Adapter, Please Enter Our Shop..
4.Upgraded Material:3D Printer Hotend Silicone Sock Is Made Of Heat-Resistant, Non-Stick Silicone Material, Injection Molded With Temperature Resistance Up To 280°C/536℉. Good For Keeping The Hot End Clean And Temperature Stable..
2. Easy To Install And Remove: Drop-In Replacement For The Original Sock. They Go On Just As Easily As The Oem Ones Do, Help Keep Your Heater Block Clean And Repel Plastic Of Burnt, Blackened, And Filament Build-Up, Reduce Your Repair Times, Then Extend The Life Of The Heat Block And Nozzle, Even The Whole Hot End. Make Sure To Enable The "Nextruder Silicone Sock" Option Under "Settings->Hardware", Otherwise You Might See Issues With It Not Retracting Enough To Prevent Crashing Into Your Print..
Features
- 1. Good Nozzle cover for MK4 Hot End: The Heater Block Silicone Sock is compatible with Prusa MK4 - MK3.9 - XL 3D Printer. These fit snugly, do not warp under heat and work well. Note: NOT for Prusa MK3S MK3 MK2.5S MK2.5 MK2S MMU2S CW1 SL1 MINI MK3S+ MINI+ SL1S CW1S MK2 MMU2 MMU1 MMU3 Hotend. A perfect diy 3d printer part for MK4 all-metal high-precision nozzle with an all-metal filament guide (no PTFE tubes anywhere).
- 2. Easy to install and remove: Drop-in Replacement for the original sock. They go on just as easily as the OEM ones do, Help keep your heater block clean and repel plastic of burnt, blackened, and filament build-up, reduce your repair times, then extend the life of the heat block and nozzle, even the whole hot end. Make sure to enable the Nextruder Silicone Sock option under Settings->Hardware, otherwise you might see issues with it not retracting enough to prevent crashing into your print.
- 3. Package Contents: Nice set of silicone covers to keep your blocks clean. Easy Installation, just slip it on. It's a must-have to keep a few extra covers at hand when you don't just have a single nozzle/block. It's easier to keep your MK4 nozzles paired with a block, thermistor, and heater for faster changes. Of course, that includes these silicone covers. It keeps heat block from further messes. Maintain the hotend temperature stable and provides protection from failed 3d printing projects.
- 4.Upgraded Material:3D Printer Hotend Silicone Sock is made of heat-resistant, non-stick silicone material, Injection molded with temperature resistance up to 280 C/536 . Good for keeping the hot end clean and temperature stable.
- 5.High temperature Resistance for 3d printer material: With this sock you can safely print more exotic materials such as PETG at higher temperatures while also using the cooling fans at full speed. Actively keeping the hotend very hot and cooling the PETG much quicker before it is laid onto the hotbed can help with success rates on more prints. If need MK4 nextruder nozzle hot bed thermistor heater block, nextruder v6 nozzle adapter, please enter our shop.
- See more on Amazon...
Brand: FYSETC | Manufacturer: fuyuansheng
Dimensions: 0.95 x 0.61 x 0.63 inches
See On Amazon #13
Prusa Specific Thermistor (MK2, MK3) (PRUSA-THERMISTOR)
Asin: B07TYGYWRG | Model: PRUSA-THERMISTOR | PartNumber: PRUSA-THERMISTOR
A Custom Made Thermistor Encapsulated Into An Easy To Use Cartridge Package..
Features
- Genuine E3D Parts
- A custom made thermistor encapsulated into an easy to use cartridge package.
- See more on Amazon...
Brand: E3D | Manufacturer: E3D
See On Amazon #14
AOMUWKE 3D Printer Hotend for Kobra 2 Series, 3D Printer Parts Hot End Kit with 4PCS Silicone Sock and 5PCS 0.4mm Nozzles for Anycubic Kobra 2, Kobra 2 Neo, Kobra 2 Pro, Kobra 2 Plus, Kobra 2 Max
Asin: B0CCTJDTQP
Fast Heat Dissipation: The Structure Of The Hotend Kit Adopts A Special Shape, And The Feeding Is Smooth, Which Can Effectively Dissipate Heat And Support Fast Printing..
Package Includes: 1X Hotend Print Head For Kobra 2, 5Pcs 0.4Mm Nozzles, 4Pcs Silicone Socks..
Support Filament: The Hot End Supports A Variety Of Filament Materials, Such As 1.75Mm Pla/Abs/Tpu/Petg/Wood..
Easy Installation: The Teflon Tube, Heater And Thermistor Are Pre-Installed, Just Remove The Old Hotend Kit And Replace With The New Hotend Kit Wiring To Get Started..
Features
- Compatible Models: This hotend kit is compatible with Anycubic Kobra 2, Kobra 2 Neo, Kobra 2 Pro, Kobra 2 Plus, Kobra 2 Max FDM 3D Printer.
- Easy Installation: The Teflon tube, heater and thermistor are pre-installed, just remove the old hotend kit and replace with the new hotend kit wiring to get started.
- Fast Heat Dissipation: The structure of the hotend kit adopts a special shape, and the feeding is smooth, which can effectively dissipate heat and support fast printing.
- Support Filament: The hot end supports a variety of filament materials, such as 1.75mm PLA/ABS/TPU/PETG/WOOD.
- Package includes: 1x Hotend print head for Kobra 2, 5PCS 0.4mm nozzles, 4PCS silicone socks.
- See more on Amazon...
Brand: AOMUWKE | Manufacturer: AOMUWKE
See On Amazon #15
E3D Prusa MK3 MK3S V6 HotEnd Kit
Asin: B07YNHS6F4
Prusa Heatbreak & Thermistor.
Drop-In Replacement.
Maximum Temperature: 285Degc.
Provides More Reliability With Retractions When Using The Mmu.
Features
- Fits MK3 and MK3S
- Provides more reliability with retractions when using the MMU
- Prusa heatbreak & thermistor
- Maximum temperature: 285degC
- Drop-in replacement
- See more on Amazon...
Brand: E3D | Manufacturer: E3D-ONLINE
See On Amazon #16
Creality Original Ender 3 Full Assembled Hotend Set, Replacement Full Assemble Hotend Kit with Mental Shell and Dual Fan for Ender 3 / Ender 3S/ Ender 3 Pro
Asin: B0C85CPXS7
【Easy Installation】The Kit Is Assembled Before Delivery, Which Means It's Quite Easy To Install Even If You Are A Beginner Of 3D Printing. You Can According The Video On The Product Page To Install It..
【After Sales Service】Creality Pays Great Attention To The Buyer’S User Experience. If You Have Unsolvable Problems During Installation And Use, Please Feel Free To Contact Us, Our After-Sales Technical Team Will Provide You With Detailed Solutions Within 24 Hours..
【High Quality Silicone Case】The Non-Stick Silicone Cover Keeps The Hotend Temperature Extremely Stable And What's More, The Extruder Looks Clean And Tidy..
【Effective Heating And Cooling System】 It Has Heating Block And Heat Sink And Dual Fan For Cooling. The Heating Block With Insulating Silicone Cover Keeps The Temperature Stable And Ensures Even Printing. The Design With Two Fans Makes Heat Dissipation More Even, Solidifies The Model Quickly And Ensures Precise Printing.
Features
- Quality Assurance The Ender 3 hotend extruder kit and accessories are all original and high quality from 100% quality assurance. Suitable for Creality Ender 3 / Ender 3S/ Ender 3 Pro
- Effective heating and cooling system It has heating block and heat sink and dual fan for cooling. The heating block with insulating silicone cover keeps the temperature stable and ensures even printing. The design with two fans makes heat dissipation more even, solidifies the model quickly and ensures precise printing
- Easy Installation The kit is assembled before delivery, which means it's quite easy to install even if you are a beginner of 3D printing. You can according the video on the product page to install it.
- High Quality Silicone Case The non-stick silicone cover keeps the hotend temperature extremely stable and what's more, the extruder looks clean and tidy.
- After Sales Service Creality pays great attention to the buyer s user experience. If you have unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
See On Amazon #17
Creality Ender 3 V3 KE Ceramic Heating Block Kit, 3D Printer Parts All Metal Heat Break 300 C High Temperature Resistance Hotend Heating Block Kit with 5PCS Brass Nozzles for Ender 3 V3 KE
Asin: B0CQ7ZWFQ5
Large Hot Melt Section And High Flow Support: The Overall Hot Melt Section Is Increased By 30%(The Hot Melt Section Length Is 28.5Mm),Supporting Up To 600Mm/S High-Speed Printing..
Processing Upgrade For Better Printing: The Heat Break Is Made Of Titanium Alloy, With An Extremely Thin Wall Thickness Of 0.25 Mm For Excellent Heat Insulation Performance.Nozzle Inner Wall Roughness < Ra0.4,Smoother Feeding..
Titanium Alloy And Copper Heat Break High Temperature Resistance: All Metal Design, More Powerful Overall Performance Support 300°C High Temperature Printing, Compatible With More Filaments Such As Pla, Abs Petg,Tpu, Pp, Pc,Nylon, Etc..
Powerful Ceramic Heating Ring: The Heating Block Kit Uses A 60W Ceramic Heating Ring To Increase The Heating Speed, More Uniform Heating, And Faster Heat Transfer..
Features
- Compatible Models: This Ceramic Heating Block Kit is compatible with Creality Ender 3 V3 KE High Speed 3D Printers.
- Powerful ceramic heating ring: The heating block kit uses a 60W ceramic heating ring to increase the heating speed, more uniform heating, and faster heat transfer.
- Large Hot Melt Section and High Flow Support: The overall hot melt section is increased by 30%(The hot melt section length is 28.5mm),supporting up to 600mm/s high-speed printing.
- Titanium Alloy and Copper Heat Break High Temperature Resistance: All metal design, more powerful overall performance support 300 C high temperature printing, compatible with more filaments such as PLA, ABS PETG,TPU, PP, PC,nylon, etc.
- Processing Upgrade for Better Printing: The heat break is made of titanium alloy, with an extremely thin wall thickness of 0.25 mm for excellent heat insulation performance.Nozzle inner wall roughness < Ra0.4,smoother feeding.
- See more on Amazon...
Brand: KOYOFEI | Manufacturer: KOYOFEI
See On Amazon #18
POLISI3D 500 High Temperature Plated Copper Heater Block Compatible with PT100 Cartridge Sensor Version V6 Hotend Titan Aero Extruder Prusa i3 MK3 MK3S 3D Printer (Copper)
Asin: B08NPKF2GC | Model: V6 Heater block PT100 version | PartNumber: V6 Heater block PT100 version | Ean: 0791548327109 | UPC: 791548327109
This Heater Block Is For Od 3Mm Cartridge Temperature Sensor.
Package: 1Piece.
This Copper-Alloy Is Very Temperature Resilient, And Will Not Start To Soften Or Anneal Until Way Beyond 500°C, Making It Perfect For The High-Temperature Printing. In Addition To High Temperature Performance This Block Have An Advanced Nickel Based Plating.
Copper Has More Than 3X The Thermal Conductivity Of Brass, And The Copper Alloy We Use Has Been Hardened And Treated To Reduce The Oxidation That Occurs In Copper At High Temperatures. The Higher Thermal Conductivity Will Also Slightly Increase Your Heat-Up Times, And Can Provide Tighter Temperature Control..
Features
- Size: 23x16x11.5mm. Material: Copper; It is machined with very high precision and high quality
- Copper has more than 3x the thermal conductivity of brass, and the copper alloy we use has been hardened and treated to reduce the oxidation that occurs in copper at high temperatures. The higher thermal conductivity will also slightly increase your heat-up times, and can provide tighter temperature control.
- This heater block is for OD 3mm cartridge temperature sensor
- This copper-alloy is very temperature resilient, and will not start to soften or anneal until way beyond 500 C, making it perfect for the high-temperature printing. In addition to high temperature performance this Block have an advanced nickel based plating
- Package: 1piece
- See more on Amazon...
Brand: POLISI3D | Manufacturer: POLISI3D
Dimensions: 0.45 x 0.91 x 0.63 inches | Weight: 0.07 pounds
See On Amazon #19
FYSETC Prus i3 MK3 Upgrade Hotend Parts HT-NTC100K Thermistor Sensor High Temperature +250 Degrees 2 Pins for 3D Printer MK3 Extruder Heater Block 3Pcs
Asin: B07QDQXDQ5
The Customized Terminal Connector( Xh2.54 2P With Buckle) Is Specially For Mk3/Mk3s Prus Einsy Boards, So Please Check Before Ordering. If For Prus Mini, Please Search Asin: B09wmzj86c. If Need More Support, Please Feel Free To Contact Us Via Your Order Id, We'll Assist You Directly..
Adopts 304 Stainless Steel, With The Internal Temperature Package To Ensure The Maximum Service Life With Precision Temperature Measurement..
Ht-Ntc100k Thermistor Adopts White High-Temperature Cord, Can Bear Higher Temperature. And For Customers' Convenience, The Wires Adopts Line Connection, The Customer Can Tear The Wires Depends On Their Application. The High Temperature Line Is Double Thicker Than Others In The Market, Not Easy To Break Off..
The Temperature Measurement: -50 °C ~ +250 °C For A Long Lifecycle, Sometimes Can Reach Up To +300℃ For A Short Time Using, Can Replace The Original K-Type Thermocouple Temperature, Very Fit For Printing High-Temperature Filament. （Please Note That The Temperature Should Not Be Over 300 °C, Otherwise The Temperature Will Not Be Accurate.).
Features
- Upgrade HT-NTC100K Thermistor: package temperature measurement. Temperature measurement head cylinder diameter 3mm, length 15mm, can be used with the same size heating block that support the thermocouple.
- The temperature measurement: -50 C ~ +250 C for a long lifecycle, sometimes can reach up to +300 for a short time using, can replace the original K-type thermocouple temperature, very fit for printing high-temperature filament. Please note that the temperature should not be over 300 C, otherwise the temperature will not be accurate.)
- The Customized Terminal Connector( XH2.54 2P with buckle) is specially for MK3/MK3S prus einsy boards, so please check before ordering. If for Prus Mini, please search Asin: B09WMZJ86C. If need more support, please feel free to contact us via your order ID, we'll assist you directly.
- HT-NTC100K thermistor adopts white high-temperature cord, can bear higher temperature. And for customers' convenience, the wires adopts line connection, the customer can tear the wires depends on their application. The high temperature line is double thicker than others in the market, not easy to break off.
- Adopts 304 stainless steel, with the internal temperature package to ensure the maximum service life with precision temperature measurement.
- See more on Amazon...
Brand: FYSETC | Manufacturer: Fuyuansheng
See On Amazon #20
FYSETC Prusa i3 MK3 MK3S Cooling Fan 5015 50x50x15mm 5V DC 0.35A otend Cooler Blow Radiator Sleeve Bearing for 3D Printer Parts Accessories, 2Pcs
Asin: B07NTKG9K4 | Model: MK3 5010 Fan | PartNumber: MK3 5010 Fan
Rated Voltage: 5V, 0.35A.
Package Content: 2Piece 5015 5V Front Hotend Blower Fans. If Need More Support, Please Feel Free To Contact Us, We'll Assist You Directly..
Please Note: The Fan Has Two Sides,But The Side With Sticker Must Be Always Facing The Hotend (Not Visible When The Fan Is Mounted).Otherwise,The Cooling Won't Work Properly..
Size: About 50X50x15mm/ 1.9X1.9X0.59 Inch; Cable Length: About 750Mm/ 29.5 Inch.
Features
- Brushless DC Blower Fan, best DIY replacement extruder hotend parts, This MK3 fan is used for Prus i3 MK3 MK3S MK2/2.5 3D printer Extruder
- Size: About 50x50x15mm/ 1.9x1.9x0.59 inch; Cable Length: about 750mm/ 29.5 inch
- Rated Voltage: 5V, 0.35A
- Please Note: the fan has two sides,but the side with sticker must be always facing the hotend (not visible when the fan is mounted).Otherwise,the cooling won't work properly.
- Package Content: 2piece 5015 5V Front hotend blower fans. If need more support, please feel free to contact us, we'll assist you directly.
- See more on Amazon...
Brand: FYSETC | Manufacturer: Fuyuansheng
Dimensions: 1.90 x 1.90 x 0.59 Inches | Weight: 0.02 pounds
See On Amazon
Looking For Something Else?
Search