BAMBULAB Official Bambu Lab Hotend with Nozzle - X1 Series and P1 Series Compatible with P1S P1P X1C X1 Carbon 3D Printer (.2mm Stainless Steel)
Asin: B0D2WFM9VK | Ean: 6975337030683
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Max. Printing Temp. 300 ℃.
Includes: Hotend With Nozzle, Silicone Sock, Thermal Grease, M3-14 Step Screws.
Features
- Official Bambu Lab Hot End with Nozzle, Compatible with Bambu Lab X1 Carbon and P1 Series Printers: This hotend kit is specifically designed for the Bambu Lab X1 carbon 3D printer, and Bambu Lab P1P 3D printer. It ensures precision and efficiency in your 3D printing tasks
- Includes: Hotend with Nozzle, Silicone Sock, Thermal Grease, M3-14 Step Screws
- Max. Printing Temp. 300
- See more on Amazon...
Brand: BAMBULAB | Manufacturer: Bambu Lab
See On Amazon Similar To BAMBULAB Official Bambu Lab Hotend
#1
Creality K1 Max 3D Printer, 600mm/s Max High-Speed 3D Printers with Auto Leveling, Dual Cooling, Smart AI Function and Out-of-The-Box, Large Printing Size 11.8x11.8x11.8in
Asin: B0C5RFGNDH | Model: K1 Max | PartNumber: K1 Max
Smart Ai Lidar & Camera - The 1Μm Resolution Lidar Will Scan The First Layer On Its Own. It Will Pause Printing And Tell You Immediately If Something Goes Wrong. And K1 Max Uses An Ai Camera To Watch Over Spaghetti Failure, Foreign Objects, Debris, Etc. It Will Alter You When An Error Occurs. It Also Supports Real-Time Monitoring And Creates Time-Lapses For Sharing. Furthermore, The Strain Sensors In The Heatbed Generate An Accurate Leveling Mesh For Auto Compensation..
Note: If You Have A Problem With Nozzle Clogging, Please Check The Following Or Contact Us Directly For Help! A. Upgrade Firmware To 1.3.3.8 B. Use Official Slicing Software For Better Results..
32Mm³/S Flow & Dual Cooling - A New Ceramic Heater Encircling The Hotend Can Melt Various Filaments Instantly. The Dual-Gear Direct Drive Extruder And Titanium Alloy Heartbreak Ensure 32Mm³/S Full-Blast Feeding Flow In Up To 300℃. The Freshly Printed Model Is Cooled Rapidly By Two Fans, One On The Printhead With Directional Air Ducts, And Another In The Build Chamber. The Model Hardens Before Any Stringing And Warping Could Happen..
After-Sale Service - There Are More Than 20 Engineers For After-Sales Service And Provide 24/7 Customer Service With 1-Vear Limited And Lifetime Technical Assistance. Please Contact Us Via "Ask A Question' Directly To Get Professional Assistance..
Out-Of-The-Box - K1 Max Is Assembled And Calibrated Before Shipment, And It Offers A Boot-Up Quick Guide And Allows Self-Test With One Tap. So, Users Can Print Right Out Of The Box. The Creality K1 Max Offers Hands-Free Auto Leveling, The Strain Sensors In The Heatbed Deliver Hands-Free Leveling, While The Ai Lidar Scans The Bed Tilts At A Million Points For More Precise Leveling. Its Heatbed Heats To 60℃ In Just The 90S. Ensuring Perfect Prints Every Time Without The Hassle..
11.8X11.8X11.8In Large Printing Size - The K1 Max Boasts An Impressive Printing Size Of 300×300×300Mm, Allowing For Multiple Models To Be Printed Simultaneously, Significantly Increasing Printing Efficiency. Additionally, Its Print Volume To Printer Size Ratio Can Reach Up To 25.5%, The Biggest Compared With Similar-Sized Printers..
Features
- 600MM/S HIGH-SPEED PRINTING - The Creality K1 Max 3D printer is designed for efficiency, boasting a maximum speed of 600mm/s and 20000mm/s Acceleration, which is 12 times faster than a regular FDM 3D printer. Perfect for professionals and beginners.
- 11.8x11.8x11.8in LARGE PRINTING SIZE - The K1 Max boasts an impressive printing size of 300 300 300mm, allowing for multiple models to be printed simultaneously, significantly increasing printing efficiency. Additionally, its print volume to printer size ratio can reach up to 25.5%, the biggest compared with similar-sized printers.
- SMART AI LIDAR & CAMERA - The 1 m resolution LiDAR will scan the first layer on its own. It will pause printing and tell you immediately if something goes wrong. And K1 Max uses an AI camera to watch over spaghetti failure, foreign objects, debris, etc. It will alter you when an error occurs. It also supports real-time monitoring and creates time-lapses for sharing. Furthermore, The strain sensors in the heatbed generate an accurate leveling mesh for auto compensation.
- OUT-of-THE-BOX - K1 Max is assembled and calibrated before shipment, and it offers a boot-up quick guide and allows self-test with one tap. So, users can print right out of the box. The Creality K1 Max offers hands-free auto leveling, the strain sensors in the heatbed deliver hands-free leveling, while the AI LiDAR scans the bed tilts at a million points for more precise leveling. Its heatbed heats to 60 in just the 90s. Ensuring perfect prints every time without the hassle.
- 32mm /s FlOW & DUAL COOLING - A new ceramic heater encircling the hotend can melt various filaments instantly. The dual-gear direct drive extruder and titanium alloy heartbreak ensure 32mm /s full-blast feeding flow in up to 300 . The freshly printed model is cooled rapidly by two fans, one on the printhead with directional air ducts, and another in the build chamber. The model hardens before any stringing and warping could happen.
- AFTER-SALE SERVICE - There are more than 20 engineers for after-sales service and provide 24/7 customer service with 1-vear limited and lifetime technical assistance. Please contact us via ask a question' directly to get professional assistance.
- Note: If you have a problem with nozzle clogging, please check the following or contact us directly for help! a. Upgrade firmware to 1.3.3.8 b. Use official slicing software for better results.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
Dimensions: 18.18 x 17.12 x 20.70 inches | Weight: 39.68 Pounds
Warranty: 1 year
See On Amazon #2
FLASHFORGE Adventurer 5M 3D Printer, 600mm/s High-Speed Fully Auto Leveling Printer with Quick Detachable 280 Nozzle, Effective Dual-Channel Cooling, Core XY Structure, Print Size 220x220x220mm
Asin: B0CD78PTVX | Ean: 6937120305088
【Core Xy All-Metal Motion Structure】The Adventurer 5M Employs A New And Robust Design To Ensure Fast Printing Speeds While Delivering High-Quality Output. The Stable And Smooth Motion Structure Supports Stable And Low-Noise Printing In High-Speed Mode..
【Resume Prints After Outages】If The Electricity Shuts Down, It Will Save The Ongoing Layer And Resume From That Point When The Power Is Restored. The Flexible Double-Sided Pei Steel Plate Make It Easy To Remove The Printed Model By Bending It. The Reverse Side Is Specifically Designed For Printing With Petg Material..
【Patent Quick-Detachable Nozzle】Different Nozzle Diameter Options (0.25/0.4/0.6/0.8 Mm) Are Suitable For Both High Precision And High Efficiency Modes. Quick Change Nozzle Requires No Tools And Can Be Changed In As Little As 3 Seconds. Easy To Maintain Nozzle For Both The Novice And The Expert..
【Attain A Flawless Printing Experience】The Adventurer 5M Features A Fully Automatic One-Click Levelling System. It Measures The Distance From The Nozzle To The Build Plate To Determine The Correct Offsets. No Requirement For Any Levelling Tools Or Manual Calibration Of The Z-Axis. As A Result, Achieving A Flawless First Layer Becomes A Simple And Effortless Task..
Features
- Your Creativity Knows No Bounds Good Helper for Beginners. Adventurer 5M meets the innovative needs of users with brand-new technology and craftsmanship, whether you are a rookie or an expert. Your originality is unlimited, realize ideas to reality with Adventurer 5M, easy and stress-free.
- Attain a Flawless Printing Experience The Adventurer 5M features a fully automatic one-click levelling system. It measures the distance from the nozzle to the build plate to determine the correct offsets. No requirement for any levelling tools or manual calibration of the Z-axis. As a result, achieving a flawless first layer becomes a simple and effortless task.
- Core XY All-Metal Motion Structure The Adventurer 5M employs a new and robust design to ensure fast printing speeds while delivering high-quality output. The stable and smooth motion structure supports stable and low-noise printing in high-speed mode.
- Patent Quick-Detachable Nozzle Different nozzle diameter options (0.25/0.4/0.6/0.8 mm) are suitable for both high precision and high efficiency modes. Quick change nozzle requires no tools and can be changed in as little as 3 seconds. Easy to maintain nozzle for both the novice and the expert.
- Resume Prints After Outages If the electricity shuts down, it will save the ongoing layer and resume from that point when the power is restored. The flexible double-sided PEI steel plate make it easy to remove the printed model by bending it. The reverse side is specifically designed for printing with PETG material.
- See more on Amazon...
Brand: FLASHFORGE | Manufacturer: Zhejiang Flashforge 3D Technology Co., Ltd
Dimensions: 20.00 x 20.00 x 20.00 inches
Warranty: 1 Year
See On Amazon #3
HICTOP Bambu Labs Hotend X1 Carbon Assembly with Removable Hardened Steel 0.4mm Nozzle Hotend for Bambu Labs X1 Series 3D Printers
Asin: B0CLTN33R4
3.The Heat Sink, Throat, Heat Block And The Removable Hardened Steel 0.4Mm Nozzle Are Assembled, You Only Need To Assemble The Ceramic Heater And Thermistor Or Keep Them For Later Use. Please Heat The Nozzle To 250℃ And Tighten It To Avoid Leaking..
5.Please Heat Up The Bambu Labs Hotend To About 260℃ When Changing The Nozzle, It Helps You To Prevent It From Leaking, Please Take Care Of Your Hand..
4.The Hardened Steel 0.4Mm Nozzle Is Removable, You Can Remove The Nozzle The Nozzle With Just A Wrench No Need To Grab The Heat Sink, It Is A Great Choice If You Often Change The Nozzle..
2. The Bambu Lab Hotend Is Compatible With X1 Series 3D Printers But Not P1 Series As The Ceramic Heaters As Thermistors For Them Are Different For Them..
Features
- 1. It is a bambu labs complete hotend without hotend cooling fan and retaining clip, the assembled hotend with hardened steel 0.4mm nozzle, the ceramic heater and thermistor a silicone cover and a thermal grease are included.
- 2. The bambu lab hotend is compatible with X1 Series 3D printers but not P1 Series as the ceramic heaters as thermistors for them are different for them.
- 3.The heat sink, throat, heat block and the removable hardened steel 0.4mm nozzle are assembled, you only need to assemble the ceramic heater and thermistor or keep them for later use. Please heat the nozzle to 250 and tighten it to avoid leaking.
- 4.The hardened steel 0.4mm nozzle is removable, you can remove the nozzle the nozzle with just a wrench no need to grab the heat sink, it is a great choice if you often change the nozzle.
- 5.Please heat up the bambu labs hotend to about 260 when changing the nozzle, it helps you to prevent it from leaking, please take care of your hand.
- See more on Amazon...
Brand: HICTOP | Manufacturer: HICTOP
See On Amazon #4
R QIDI TECHNOLOGY X-PLUS3 3D Printers Fully Upgrade, 600mm/s Industrial Grade High-Speed 3D Printer, Acceleration 20000mm/s2, 65 Independent Heated Chamber, CoreXY&Klipper, 11.02x11.02x10.63 inch
Asin: B0C7Q23P31
【Independent Chamber Heating System】Heat Chamber To 60℃ In 25 Minutes, And The Internal Structure And Hardware Is Made To Resist High Temp, Equipped Drying Box,While We Specially R&D The Hyper-Speed Abs Rapido/Petg-Tough/Abs-Gf25 Filament. X Plus3 Is Easy Warpless To Print High Performance Materials Whitout Layer Separation..
【R Qidi Technology Service】R Qidi Technology Are Committed To Making Reliable 3D Printers.X-Plus3 Is Suitable For Professional Users As Well As Novice Users.Not Assembly,Out Of The Box. It Is Easy To Print According To The Operating Instructions.The Highly Praised After-Sale Service Of R Qidi Technology Is The Most Trustworthy.1 Year Warranty..
【Faster And More Accurate】Rebuild A New Hotend Cooling System, Fast 3D Printer With A Gear Ratio Of 9.5:1 And 3X Extrusion Flow. The Lightweight Design Of The Print Head&All Metal Frame, Quality Model Free Of Ringing, Pressure Advance And Auto Leveling For Excellent Resolution, 64Bit Processor, Cortex-A53，Main Frequency 1.5Ghz, Equipped With 8G-Emmc And 1G Ddr3..
【Multi-Material Printing】X Plus3 Has Two Sets Of Nozzle With Different Characteristics (Copper Alloy And Hardened Steel Hot End)And Direct Drive Extruder.The Qidi High Performance Materials Is Able To High-Speed Print In X Plus3, Easy Warpless Print Abs/Asa/Petg/Pa/Pc/Gf/Cf/Pla Filament, Variety Of Printing Filaments Meet The Needs Of Different Users..
Features
- Fully Upgrades X-Plus3 A revolutionary FFF/FDM big 3d printer designed for commercial use.Featuring Klipper firmware and CoreXY structure, it reduces printing time by up to 80%(600mm/s print speed and 20000mm/s acceleration).Meanwhile our software and firmware are fully open source for fast 3d printer enthusiasts&geeks.
- Multi-Material Printing X Plus3 has two sets of nozzle with different characteristics (copper alloy and hardened steel hot end)and direct drive extruder.The QIDI High Performance Materials is able to high-speed print in X Plus3, easy warpless print ABS/ASA/PETG/PA/PC/GF/CF/PLA filament, variety of printing filaments meet the needs of different users.
- Independent Chamber Heating System Heat chamber to 60 in 25 minutes, and the internal structure and hardware is made to resist high temp, equipped drying box,while we specially R&D the hyper-speed ABS Rapido/PETG-Tough/ABS-GF25 filament. X plus3 is easy warpless to print High Performance Materials whitout layer separation.
- Faster and more accurate Rebuild a new hotend cooling system, fast 3d printer with a gear ratio of 9.5:1 and 3x extrusion flow. The lightweight design of the Print Head&All metal frame, quality model free of ringing, Pressure advance and auto leveling for excellent resolution, 64bit Processor, Cortex-A53 Main frequency 1.5GHz, equipped with 8G-EMMC and 1G DDR3.
- R QIDI TECHNOLOGY Service R QIDI TECHNOLOGY are committed to making reliable 3d printers.X-Plus3 is suitable for professional users as well as novice users.Not assembly,out of the box. It is easy to print according to the operating instructions.The highly praised after-sale service of R QIDI TECHNOLOGY is the most trustworthy.1 year warranty.
- See more on Amazon...
Brand: R QIDI TECHNOLOGY | Manufacturer: Zhejiang QIDI TECHNOLOGY CO.,LTD
Dimensions: 20.83 x 20.75 x 20.12 inches
See On Amazon #5
HIKUDIY 0.2mm Bambu Lab A1/A1 Mini Hotend, 3D Printer Parts Replacement Print Head for Bambu Lab A1/A1 Mini 3D Printer
Asin: B0D1XHWJHH
Quick Replacement Design: The A1/A1 Mini Hotend Heating Component With A Magnetic Block, Can Quickly And Accurately Fix The Hotend To The Installation Position, Making It Easy And Convenient To Remove And Install The Hotend (Note: Please Make Sure The Hotend Has Cooled Down Before Replacement, And Avoid Touching The Heating Block Under The Hot End To Prevent Burns).
Wide Compatibility: The A1/A1 Mini Hotend Is Compatible With A Variety Of 3D Printing Materials, Including Pla, Abs, Petg, And More. This Broad Compatibility Ensures That Users Have A Diverse Range Of Options To Meet Their Specific Printing Requirements.
Super Durable Material: This Nozzle Is Made Of Hardened Steel Skd11 Material, The Smooth Inner Wall Which Reduces Clogging And Improves Printing Quality. The Max Temp Could Reach 500C, And The Hardness Is Over Hrc60 Can Reduce The Abrasion To The Inner And Outer Of The Nozzle During Long-Time Printing, Achieving High-Quality Printing.
Precision Temperature Control Technology: Featuring State-Of-The-Art Temperature Control Technology, The A1/A1 Mini Hotend Provides Precise Temperature Control, Ensuring Even Material Melting And Improving Overall Print Quality.
Features
- High-Performance Heating Element: This hotend kit is compatible with the Bambu Lab A1/A1 Mini 3D printer, equipped with an advanced heating element that rapidly reaches the desired temperature, ensuring a stable and efficient printing process
- Precision Temperature Control Technology: Featuring state-of-the-art temperature control technology, the A1/A1 Mini hotend provides precise temperature control, ensuring even material melting and improving overall print quality
- Quick Replacement Design: The A1/A1 Mini hotend heating component with a magnetic block, can quickly and accurately fix the hotend to the installation position, making it easy and convenient to remove and install the hotend (Note: Please make sure the hotend has cooled down before replacement, and avoid touching the heating block under the hot end to prevent burns)
- Super Durable Material: This nozzle is made of hardened steel SKD11 material, the smooth inner wall which reduces clogging and improves printing quality. The max temp could reach 500c, and the hardness is over HRC60 can reduce the abrasion to the inner and outer of the nozzle during long-time printing, achieving high-quality printing
- Wide Compatibility: The A1/A1 Mini hotend is compatible with a variety of 3D printing materials, including PLA, ABS, PETG, and more. This broad compatibility ensures that users have a diverse range of options to meet their specific printing requirements
- See more on Amazon...
Brand: HIKUDIY | Manufacturer: HIKUDIY
See On Amazon #6
XIFOWE Hotend Kit 3D Printer Extruders with Standby Nozzles Compatible with Bambu Lab X1, X1-C X1 Carbon, 5 PCS Hardened Steel Nozzles (0.2, 0.4, 0.6, 0.8,1.0mm) with DIY Tools and A Parts Box...
Asin: B0D2LJZG4J | Model: Z-Hotend Kit | PartNumber: Z-Hotend Kit
【Installation Details】✔ When The Hotend Is Assembled, Please Remember! Heat The Nozzle To 250℃ And Tighten It To Avoid Leaking. And Please Heat Up The Bambu Labs Hotend To About 260℃ When Changing The Nozzle, A Small Amount Of Silicone Grease Can Also Be Applied To The Nozzle Thread, It Helps You To Prevent It From Leaking, Please Take Care Of Your Hand..
【What You Receive】✔1Pcs Hot End Hardened Steel Nozzle Assembly Kit With A 0.4Mm Nozzle, A (0.2Mm) Printer Nozzle, A (0.4Mm) Printer Nozzles, A (0.6Mm) Printer Nozzle, A(0.8Mm) Printer Nozzle, A (1.0Mm) Printer Nozzle, A Ten-Grid Parts Box, A 4 Mm Opening Wrench, A Ceramic Heater, A Thermistor, And A Fixing Clip, A Silicone Cover, 2Pcs Screws... The Picture Content Shows The Shipped Accessories..
【Convenient】✔Easy To Install, Easy To Use, High Precision. High Quality Nozzles Not Only Suitable For Common 3D Printer Filaments, But Also Can Print Filaments Of Carbon Fiber, Fiberglass, Etc. The Roughness Of The Inner Wall Of The Throat And Nozzle Is Ra0.4, Improving Printing Quality. The Connection Between The Heating Block And The Radiator Is Upgraded To Two Titanium Alloy Screws For Fixation, Avoiding The Bending And Breaking Of The Throat During High-Speed Printing..
【Universal】✔Suitable For The Hot End Of The Original Bb Lab X1/X1 Carbon Models, And Can Be Used With Other Diy Designs. The Installation Video Is Attached To The Link For Reference. Note: Thermal And Ceramic Heating Pads Are Not Suitable For The Original P1p/S Machine Terminals, If You Have Original P1p/S Machine Terminals, Our Hotend Kit Can Also Be Applied It..
Features
- Material Nozzles are made of High quality hardened tool steel, It has excellent wear resistance, heat resistance and corrosion resistance. The anode black radiator and bimetallic insulated titanium alloy throat are fixed and locked with M3 top wire. All metal smooth insulation, composed of bimetallic copper and titanium alloy insulation sections, provides better heat dissipation effect.
- Universal Suitable for the hot end of the original Bb Lab X1/X1 Carbon models, and can be used with other DIY designs. The installation video is attached to the link for reference. Note: Thermal and ceramic heating pads are not suitable for the original P1P/S machine terminals, If you have original P1P/S machine terminals, Our hotend Kit can also be applied it.
- Installation details When the Hotend is assembled, Please remember! Heat the nozzle to 250 and tighten it to avoid leaking. And please heat up the bambu labs hotend to about 260 when changing the nozzle, a small amount of silicone grease can also be applied to the nozzle thread, it helps you to prevent it from leaking, please take care of your hand.
- Convenient Easy to install, easy to use, high precision. High quality nozzles not only suitable for common 3D printer filaments, but also can print filaments of carbon fiber, fiberglass, etc. The roughness of the inner wall of the throat and nozzle is Ra0.4, Improving printing quality. The connection between the heating block and the radiator is upgraded to two titanium alloy screws for fixation, avoiding the bending and breaking of the throat during high-speed printing.
- What you receive 1pcs hot end hardened steel nozzle assembly kit with a 0.4MM nozzle, a (0.2mm) Printer Nozzle, a (0.4mm) Printer Nozzles, a (0.6mm) Printer Nozzle, a(0.8mm) Printer Nozzle, a (1.0mm) Printer Nozzle, a Ten-Grid Parts Box, a 4 mm opening wrench, a ceramic heater, a thermistor, and a fixing clip, a Silicone cover, 2PCS screws... The picture content shows the shipped accessories.
- See more on Amazon...
Brand: XIFOWE | Manufacturer: XIFOWE
Dimensions: 0.90 x 5.40 x 2.90 inches
See On Amazon #7
HysiPrui 2pcs 3D Printer Accessories NTC 100K Thermistor Temp Sensor and 2pcs Cartridge Heater, Hotend Quick Replacement Parts, for 3D Printer Bambu Lab X1/X1-Carbon
Asin: B0CN6DDK4B
【High Quality 3D Printer Accessories】: The 3D Printer Thermistor And Cartridge Heater Are Processed By Cnc Machine Tool With High Precision And Stable Performance. It Has Been Tested To Be Fully Suitable For High Temperature Printing, Withstanding A Maximum Temperature Of Up To 450°C. It Also Works Perfectly With Daily Filaments Such As Pla, Abs, Tpu, Petg, And So On..
【Easy Installation】: No Need To Disassemble The Motherboard And Wiring Harness, Directly Replace The Thermistor Or Cartridge Heater To Quickly Wire. Inside The Tin Ring, Waterproof Hot Melt Adhesive, No Need To Weld, Sealed Waterproof, Anti-Leakage, High Temperature Resistance..
【What You Get】: Package Includes 2Pcs 3D Printer Thermistors, 2-Pin Xh2.54 Connector, And 2Pcs Cartridge Heater. Insulated With High Temperature Resistant 450 Degree Celsius Fiberglass To Avoid The Possibility Of Thermal Short-Circuiting When Working At High Temperature, Thus Prolonging The Service Life..
【Stable And Durable】: Thermistor And Cartridge Heater, Special Designed For 3D Printer, High Temperature Resistant, Durable, Longer Service Life. High Precision, High Sensitivity, Fast Temperature Conduction, High Temperature Resistance..
Features
- Compatible 3D Printers : The 2 packs NTC 100k thermistor temp sensors and 2 packs cartridge heater are compatible with Bambu Lab X1/X1-Carbon 3d printers, please confirm your 3d printer model before ordering.
- Stable and Durable : Thermistor and cartridge heater, special designed for 3d printer, high temperature resistant, durable, longer service life. High precision, high sensitivity, fast temperature conduction, high temperature resistance.
- High Quality 3D Printer Accessories : The 3d printer thermistor and cartridge heater are processed by CNC machine tool with high precision and stable performance. It has been tested to be fully suitable for high temperature printing, withstanding a maximum temperature of up to 450 C. It also works perfectly with daily filaments such as PLA, ABS, TPU, PETG, and so on.
- What You Get : Package includes 2pcs 3D printer thermistors, 2-pin XH2.54 connector, and 2pcs cartridge heater. Insulated with high temperature resistant 450 degree Celsius fiberglass to avoid the possibility of thermal short-circuiting when working at high temperature, thus prolonging the service life.
- Easy Installation : No need to disassemble the motherboard and wiring harness, directly replace the thermistor or cartridge heater to quickly wire. Inside the tin ring, waterproof hot melt adhesive, no need to weld, sealed waterproof, anti-leakage, high temperature resistance.
- See more on Amazon...
Brand: HysiPrui | Manufacturer: HysiPrui
See On Amazon #8
DUROZZLE Ruby Nozzle Hotend Combo for Bambu Lab P1P / P1S / X1 / X1C, Compatible with Hardened Steel & Ruby & Tungsten Carbide & Diamond Nozzles
Asin: B0CXDTGW4C | Ean: 0750439928443 | UPC: 750439928443
【Upgraded Hotend Design】All-Metal Hotend Design, No Ptfe Tube Inside. Temperature Resistant Up To 500°C, Able To Withstand Printing Temperature From Regular Pla Abs Pc (200°C-300°C) All The Way To Pro High Temp Materials Eg Pps Ppsu Peek Etc (300°C-400°C, Water Cooling May Needed). The Inner Wall Of The Heatbreak Polished To Ra0.4, Reducing Blockages And Enhanced Material Flow;.
【For High Speed Printing】The Heating Block Has Been Upgraded From Brass To Chromium Zirconium Copper With Nickel Electroplating. The Copper Alloy Ensuring High Heat Conductivity For High Speed Printing On Bambu Lab Printers. The Nickel Plating Will Increase Durability Of The Heat Block And Give A Non-Stick Property To The Hotend..
【Enhanced Heat Dissipation】V2 Improved Heatbreak Design. Added Red Copper At Cold End For Faster Heat Dissipation. Stainless Steel Neck Is Now Supported With 2 Titanium Screws To Prevent Bending. Titanium Has Very Low Conductivity To Prevent Loss Of Heat From The Heat Block;.
【New Nozzles Options For Bambu Lab Printers】This Hotend Upgrade Opens New Options To Use Pro Nozzles Eg. Durozzle Ruby / Tungsten Carbide / Pcd Diamond Nozzles. Also Compatible With Hardened Steel Nozzles. This Kit Could Replace The Hotend Of The Original Bambu Lab P1p / P1s / X1 / X1c Models;.
Features
- What s in the Box One piece 0.4mm Ruby Nozzle compatible to all materials especially abrasive materials such as carbon fiber, glow-in-the-dark filaments and etc, Hardened Steel Nozzle 0.6mm * 1, Heat Sink * 1, Heater Block * 1, Silicone Sock * 1, Heater Clamp * 1, Titanium Screws * 2, Set Screws * 4, Thermal Grease * 1, Hex Wrench 1.5mm * 1, 4mm Wrench * 1, 7mm Wrench * 2;
- New Nozzles Options for Bambu Lab Printers This hotend upgrade opens new options to use pro nozzles eg. DUROZZLE Ruby / Tungsten Carbide / PCD Diamond nozzles. Also compatible with Hardened Steel nozzles. This kit could replace the hotend of the original Bambu Lab P1P / P1S / X1 / X1C models;
- Upgraded Hotend Design All-metal hotend design, no PTFE tube inside. Temperature resistant up to 500 C, able to withstand printing temperature from regular PLA ABS PC (200 C-300 C) all the way to pro high temp materials eg PPS PPSU PEEK etc (300 C-400 C, water cooling may needed). The inner wall of the heatbreak polished to Ra0.4, reducing blockages and enhanced material flow;
- Enhanced Heat Dissipation V2 improved heatbreak Design. Added red copper at cold end for faster heat dissipation. Stainless steel neck is now supported with 2 titanium screws to prevent bending. Titanium has very low conductivity to prevent loss of heat from the heat block;
- For High Speed Printing The heating block has been upgraded from brass to chromium zirconium copper with nickel electroplating. The copper alloy ensuring high heat conductivity for high speed printing on Bambu Lab printers. The nickel plating will increase durability of the heat block and give a non-stick property to the hotend.
- See more on Amazon...
Brand: DUROZZLE | Manufacturer: DUROZZLE
See On Amazon #9
ENOMAKER Silicone Sock for Bambu Lab X1 Carbon X1C P1P 3D Printer Extruder Hotend Protective Cover Heater Block Heat Insulation
Asin: B0C3TWK1WY | Model: Bambu Lab silicone sock | PartNumber: Bambu Lab silicone sock | Ean: 0764481226044 | UPC: 764481226044
Non-Stick Silicone Material Made..
Extend The Life Of The Heater Block And Extruder By Keeping It Cleaner..
Keep The Hotend Temperature Extremely Stable..
Heater Block Silicone Cover Instead Of Heat Insulation Cotton.
Features
- Slicone sock for Bambu Lab X1 P1P X1C 3d printer!
- Heater Block Silicone Cover Instead of Heat Insulation Cotton
- Non-stick silicone material made.
- Keep the hotend temperature extremely stable.
- Extend the life of the heater block and extruder by keeping it cleaner.
- See more on Amazon...
Brand: ENOMAKER | Manufacturer: ENOMAKER
See On Amazon #10
ACROSSXD Up to 500 C, Upgrade Hotend Assembly Kit Deluxe version with Hardened Steel Nozzles High Temperature Compatible with 3D Printer Bambu Lab X1 Series
Asin: B0CMT6KG3N | Model: BL-HT-01 | PartNumber: BL-HT-01
★ All Metal Smooth Insulation, Composed Of Bi-Metal Copper And Titanium Alloy Insulation Sections, Provides Better Heat Dissipation Effect. The Throat Is Closely Integrated With The Heating Block, And The Structure Of The Throat Has Been Upgraded. A Step Limit Has Been Added At The Fitting Point With The Heating Block, Reducing The Phenomenon Of Material Leakage And Detachment..
★ Packaging: 1 Set Of Hot End Hardened Steel Nozzle Assembly Kit With A 0.4Mm Nozzle, 2Pcs 0.4Mm High Flow Hardened Steel Nozzles, 1Pc 0.6Mm High Flow Hardened Steel Nozzle, 1Pc Ceramic Heater, 1Pc Thermistor, And 1Pc Fixing Clip, 1Pc Silicone Cover, 2Pcs Screws, ... The Picture Content Shows The Shipped Accessories. (Excluding Thermosensitive Ceramic Accessories).
★ The Roughness Of The Inner Wall Of The Throat And Nozzle Is Ra0.4, Reducing Blockage And Improving Printing Quality. The Connection Between The Heating Block And The Radiator Is Upgraded To Two Titanium Alloy Screws For Fixation, Avoiding The Bending And Breaking Of The Throat During High-Speed Printing. At The Same Time, Titanium Alloy Has Better Insulation Effect And Increases Stability..
★The Anode Black Radiator And Bi-Metal Insulated Titanium Alloy Heat Break Throat Are Fixed And Locked With M3 Top Wire, Which Is Easy To Install, Stable To Connect, And Can Be Disassembled And Replaced, Reducing The Cost Of Use..
Features
- New design for hotend upgrade V2, can directly replace the original hotend of Bambu Lab X1- Carbon/X1CC, and can be used with other DIY designs. The heating block has been upgraded to chrome zirconium copper nickel electroplating treatment, with high temperature resistance of 500 C printing and fast thermal conductivity.
- The anode black radiator and bi-metal insulated titanium alloy heat break throat are fixed and locked with M3 top wire, which is easy to install, stable to connect, and can be disassembled and replaced, reducing the cost of use.
- All metal smooth insulation, composed of bi-metal copper and titanium alloy insulation sections, provides better heat dissipation effect. The throat is closely integrated with the heating block, and the structure of the throat has been upgraded. A step limit has been added at the fitting point with the heating block, reducing the phenomenon of material leakage and detachment.
- The roughness of the inner wall of the throat and nozzle is Ra0.4, reducing blockage and improving printing quality. The connection between the heating block and the radiator is upgraded to two titanium alloy screws for fixation, avoiding the bending and breaking of the throat during high-speed printing. At the same time, titanium alloy has better insulation effect and increases stability.
- Packaging: 1 set of hot end hardened steel nozzle assembly kit with a 0.4MM nozzle, 2PCS 0.4MM high flow hardened steel nozzles, 1PC 0.6MM high flow hardened steel nozzle, 1PC ceramic heater, 1PC thermistor, and 1PC fixing clip, 1PC Silicone cover, 2PCS screws, ... The picture content shows the shipped accessories. (excluding thermosensitive ceramic accessories)
- See more on Amazon...
Brand: ACROSSXD | Manufacturer: ACROSSXD
See On Amazon #11
BAMBULAB Official Bambu Lab Hotend with Nozzle - X1 Series and P1 Series Compatible with P1S P1P X1C X1 Carbon 3D Printer (.4mm Hardened Steel)
Asin: B0D2WG7CXQ | Ean: 6975337030645
Max. Printing Temp. 300 ℃.
Includes: Hotend With Nozzle, Silicone Sock, Thermal Grease, M3-14 Step Screws.
Features
- Official Bambu Lab Hot End with Nozzle, Compatible with Bambu Lab X1 Carbon and P1 Series Printers: This hotend kit is specifically designed for the Bambu Lab X1 carbon 3D printer, and Bambu Lab P1P 3D printer. It ensures precision and efficiency in your 3D printing tasks
- Includes: Hotend with Nozzle, Silicone Sock, Thermal Grease, M3-14 Step Screws
- Max. Printing Temp. 300
- See more on Amazon...
Brand: BAMBULAB | Manufacturer: Bambu Lab
See On Amazon #12
CHPOWER 3D Printer LED Light for Bambu Lab X1, LED Waterproof Lights, LED Light Bar 3D Printer Accessories for Bambulab X1 Series, 5V 12W
Asin: B0CX8NZW4L
Bambulab X1 Series 3D Printer Part 5V 12W Led Light: Waterproof Design, Good Sealing, No Leakage, Easy To Install, You Can Follow Our Picture Guide To Install, Install And Play!.
The Length Of The Wire Is Enough, You Can Arrange The Light Strip Position According To Our Pictures Or According To Your Own Design..
It Doesn't Put Off As Much Light As Other Set Of Leds But It Was Way Easier To Run These In Your Printer. It Puts Out A Lot More Light Than The Factory Light Kit, And Is Still Controlled By The Factory App, Which Is Really Nice. This Kit Is Great For Someone Who Doesn't Have A Riser Printed For Their Machine And Still Wants To Keep The Top Glass On Your Machine..
These Are 100% Plug And Play For The Bambu Labs P1s. Not Only Are They Super Simple To Install, They Are 10X Brighter Then The Factory Led Light. Please Install It In A Glass Top Riser, That Included A 30 Degree Angle To Point The Lights Downward..
Features
- MASSIVE improvement over OEM: 12v led light 3d printer. Plenty of light, simple to install: Wires directly to the stock housing.
- These are 100% plug and play for the Bambu labs P1S. Not only are they super simple to install, they are 10x brighter then the factory LED light. Please install it in a glass top riser, that included a 30 degree angle to point the lights downward.
- Bambulab x1 series 3d printer part 5v 12w led light: Waterproof design, good sealing, no leakage, easy to install, you can follow our picture guide to install, install and play!
- It doesn't put off as much light as other set of LEDs but it was WAY easier to run these in your printer. It puts out a lot more light than the factory light kit, and is still controlled by the factory app, which is really nice. This kit is great for someone who doesn't have a riser printed for their machine and still wants to keep the top glass on your machine.
- The length of the wire is enough, you can arrange the light strip position according to our pictures or according to your own design.
- See more on Amazon...
Brand: CHPOWER | Manufacturer: CHPOWER
See On Amazon #13
IdeaFormer-3D Up to 500 C Upgraded for Bambu Lab Hotend Heater Block for Bambu Lab X1/X1C/P1P/P1S 3D Printer with Removable Hardened Steel 0.4mm Nozzle and Ceramic Heater 3D Printer Hotend
Asin: B0BXKFZ55D | Model: PH-BMU-EXTRUDER | PartNumber: PH-BMU-EXTRUDER
【Hardened Steel Nozzle】The Nozzle Is Made Of High-Quality Hardened Steel Material, With A Smooth Inner Wall Without Burrs, Reducing The Probability Of Blocking During The Printing, Which Has A Longer Lifetime And Wear Resistance. The Thread Design Of The Nozzle Can Be Easily Replaced..
【Commitment】Package List: 1Set Of Hardened Steel Nozzle Full Metal Hotend Kit + 1Extra Hardened Steel Nozzle+1Outer Hexagonal Wrench+1Open Fixed Wrench.It Is A Long Way To Transport, If You Find Any Missing Parts, You Can Contact Us Directly, We Will Reply Within 24 Hours, Thank You For Your Love Of The Product..
【Product Compatibility】The Product Is Compatible For Bambu Lab X1-Carbon,X1-Carbon Combo, Bambu Lab P1p 3D Printer, High Temperature Hotend Kit Is Widely Compatible With Various Printing Filament Materials, Such As Pla, Abs, Pteg, Tpu, Pp, Pc, Nylon, Pedk, Pei, And Other Materials..
【Technical Upgrade】The Nozzle Adopts A Threaded Connection Method, Which Utilizes The Nozzle To Contact The Steps At The Bottom Of The Throat To Solve The Phenomenon Of Falling Off. The Nozzle Is Made Of Hardened Steel And Quenched And Hardened To Make It More Wear-Resistant And Extend Its Service Life; The Inner Wall Roughness Of The Throat And Nozzle Is Ra0.4, Which Reduces The Phenomenon Of Blockage And Improves The Printing Quality..
Features
- Upgrade Heater Block The heating block was upgraded to chromium-zirconium copper nickel plating treatment, high temperature resistance 500 degree printing, and fast heat conduction.
- Technical Upgrade The nozzle adopts a threaded connection method, which utilizes the nozzle to contact the steps at the bottom of the throat to solve the phenomenon of falling off. The nozzle is made of hardened steel and quenched and hardened to make it more wear-resistant and extend its service life; the inner wall roughness of the throat and nozzle is RA0.4, which reduces the phenomenon of blockage and improves the printing quality.
- Hardened steel nozzle The nozzle is made of high-quality hardened steel material, with a smooth inner wall without burrs, reducing the probability of blocking during the printing, which has a longer lifetime and wear resistance. The thread design of the nozzle can be easily replaced.
- Product Compatibility The product is compatible for Bambu Lab x1-carbon,x1-carbon combo, Bambu Lab p1p 3D Printer, High Temperature hotend kit is widely compatible with various printing filament materials, such as PLA, ABS, PTEG, TPU, PP, PC, Nylon, PEDK, PEI, and other materials.
- Commitment Package List: 1set of hardened steel nozzle full metal hotend kit + 1extra hardened steel nozzle+1Outer hexagonal wrench+1Open fixed wrench.It is a long way to transport, if you find any missing parts, you can contact us directly, we will reply within 24 hours, thank you for your love of the product.
- See more on Amazon...
Brand: IdeaFormer-3D | Manufacturer: Bell Tech
Dimensions: 0.59 x 5.51 x 3.35 inches
See On Amazon #14
Upgrade TZ2.0 Bimetal Heatbreak Hotend w/Plated Copper Heater Block Ceramic Heater Thermistor Hardened Steel Nozzle 0.4 Compatible with Bambulab X1 / X1 Carbon Combo P1P 3D Printer
Asin: B0CDLPX1L4
Upgrade Heatbreak To Be Bimetal Heatbreak -Tc4 Titanium Alloy And Plated Copper To Have Better Heat Dissipation. Bigger Size ,And Not Easy To Be Broken..
Packaging: 1Set Hotend Parts As The First Picture Shows (The Nozzle Installed With Heat Block Is Hardened Steel But Not 3-Holes Nozzle). Note : Thermistor And Ceramic Heater Are Not Suitable For The Original P1p Machine Terminals.
1Piece High Flow Nozzle 0.4Mm As A Spare Part Will Come. The Nozzle Is Connected By Thread, And In Contact With The Bottom Step Of The Heatbreak To Completely Solve The Phenomenon Of Falling Off And Reduce The Possibility Of Leakage. The Removable Nozzle Can Be Replaced Easily, Save Time..
All Metal Design , Tz2.0 Print Flow Up To 35Mm³/S. Heater Block Is Connected With The Radiator By Two Titanium Alloy Screws To Advoid Bending And Breaking Of The Pipe During High-Speed Printing.
Features
- This Kit is Upgraded, the heating block upgraded to copper material nickel plating treatment, high temperature resistance 500C degree printing, fast heat conduction. (But the heater and thermistor is up to 300 printing, so this whole hotend only can be for up to 300 print, please know )
- All Metal Design , TZ2.0 Print flow up to 35mm /S. Heater block is connected with the radiator by two titanium alloy screws to advoid bending and breaking of the pipe during high-speed printing
- Upgrade heatbreak to be Bimetal heatbreak -TC4 Titanium alloy and Plated Copper to have better heat dissipation. Bigger size ,and not easy to be broken.
- 1piece high flow nozzle 0.4mm as a spare part will come. The nozzle is connected by thread, and in contact with the bottom step of the heatbreak to completely solve the phenomenon of falling off and reduce the possibility of leakage. The removable nozzle can be replaced easily, Save time.
- Packaging: 1set hotend parts as the first picture shows (the nozzle installed with heat block is hardened steel but not 3-holes nozzle). NOTE : thermistor and ceramic heater are NOT suitable for the original P1P machine terminals
- See more on Amazon...
Brand: HOCENWAY | Manufacturer: HoCenWay
See On Amazon #15
V2.0!! Up to 500 C, 3D Upgraded Bambu Lab Hot-End Version Hardened Steel Nozzle Assembly Kit, Compatible with X1 and P1P
Asin: B0CD434B8X | Ean: 0732184155787 | UPC: 732184155787
3. All Metal Smooth Insulation, Composed Of Bimetallic Copper And Titanium Alloy Insulation Sections, Provides Better Heat Dissipation Effect. The Throat Is Closely Integrated With The Heating Block, And The Structure Of The Throat Has Been Upgraded. A Step Limit Has Been Added At The Fitting Point With The Heating Block, Reducing The Phenomenon Of Material Leakage And Detachment..
5. Packaging: 1 Set Of Hardened Steel Nozzles With A Diameter Of 0.4Mm, And 1 High Flow 3-Hole Nozzle As A Spare Part. The Picture Content Shows The Shipped Accessories. (Excluding Thermosensitive Ceramic Accessories).
4. The Roughness Of The Inner Wall Of The Throat And Nozzle Is Ra0.4, Reducing Blockage And Improving Printing Quality. The Connection Between The Heating Block And The Radiator Is Upgraded To Two Titanium Alloy Screws For Fixation, Avoiding The Bending And Breaking Of The Throat During High-Speed Printing. At The Same Time, Titanium Alloy Has Better Insulation Effect And Increases Stability..
2. The Anode Black Radiator And Bimetallic Insulated Titanium Alloy Throat Are Fixed And Locked With M3 Top Wire, Which Is Easy To Install, Stable To Connect, And Can Be Disassembled And Replaced, Reducing The Cost Of Use..
Features
- 1. This kit is upgraded to a completely new design version, which can directly replace the hot end of the original Bb Lab X1/X1 Carbon/P1P models, and can be used with other DIY designs. The heating block has been upgraded to chrome zirconium copper nickel electroplating treatment, with high temperature resistance of 500 degrees Celsius printing and fast thermal conductivity.
- 2. The anode black radiator and bimetallic insulated titanium alloy throat are fixed and locked with M3 top wire, which is easy to install, stable to connect, and can be disassembled and replaced, reducing the cost of use.
- 3. All metal smooth insulation, composed of bimetallic copper and titanium alloy insulation sections, provides better heat dissipation effect. The throat is closely integrated with the heating block, and the structure of the throat has been upgraded. A step limit has been added at the fitting point with the heating block, reducing the phenomenon of material leakage and detachment.
- 4. The roughness of the inner wall of the throat and nozzle is Ra0.4, reducing blockage and improving printing quality. The connection between the heating block and the radiator is upgraded to two titanium alloy screws for fixation, avoiding the bending and breaking of the throat during high-speed printing. At the same time, titanium alloy has better insulation effect and increases stability.
- 5. Packaging: 1 set of hardened steel nozzles with a diameter of 0.4MM, and 1 high flow 3-hole nozzle as a spare part. The picture content shows the shipped accessories. (excluding thermosensitive ceramic accessories)
- See more on Amazon...
Brand: ZANYAPTR | Manufacturer: ZANYATECH
See On Amazon #16
Generic Upgraded Hotend Kit for Bambu Lab X1/P1P High Temperature 500C Hardened Steel 0.4mm Nozzle Extruder
Asin: B0CZ3ZXGL4 | Ean: 0198168258835 | UPC: 198168258835
0.4Mm Nozzle Extruder: This Hotend Kit Includes A 0.4Mm Hardened Steel Nozzle Extruder, Perfect For Achieving High Precision On The Bambu Lab X1c, And Bambu Lab P1s, Bambu X1c, And Bambu P1p. It Ensures A Smooth And Flawless Printing Experience..
Please Note That This Kit Includes: An Assembled Hotend, A Single 0.4Mm Hardened Steel Nozzle, Wrench Tool To Remove/Change Nozzle, Allen Key, Clip, Silicone Sock, And A Packet Of Thermal Grease. Does Not Include Thermosensitive Ceramic Accessories!.
High-Temperature Resistant: The Hotend Kit Can Withstand Temperatures Up To 500C, Making It Suitable For High-Temperature 3D Printing Tasks Using Filaments Such As Pla, Abs, Petg, Tpu, Pp, Pc, Nylon And Others!.
Features
- Compatible with Bambu Lab X1 Carbon: This upgraded hotend kit is specifically designed for the Bambu Lab X1 carbon 3D printer, and Bambu Lab P1P 3D printer. It ensures precision and efficiency in your 3D printing tasks.
- High-Temperature Resistant: The hotend kit can withstand temperatures up to 500C, making it suitable for high-temperature 3D printing tasks using filaments such as PLA, ABS, PETG, TPU, PP, PC, Nylon and others!
- 0.4mm Nozzle Extruder: This hotend kit includes a 0.4mm hardened steel nozzle extruder, perfect for achieving high precision on the Bambu Lab X1C, and Bambu Lab p1s, bambu x1c, and bambu p1p. It ensures a smooth and flawless printing experience.
- Please note that this kit includes: an assembled hotend, a single 0.4mm hardened steel nozzle, wrench tool to remove/change nozzle, allen key, clip, silicone sock, and a packet of thermal grease. Does NOT include thermosensitive ceramic accessories!
- See more on Amazon...
Brand: Generic | Manufacturer: IMAGIN3D
Weight: 0.10 Pounds
See On Amazon #17
ACROSSXD 3D Printer Hotend for Bambu Lab A1 0.4mm A1 Extrusion Head, Removable Hardened Steel 0.4mm Nozzle with High Temperature Resistant Silicone Sleeve
Asin: B0CZXH4SB2
※High-Quality Materials: Nickel-Plated Brass Titanium Alloy Heating Block Has Good Heat Resistance, Abrasion Resistance, Corrosion Resistance And Long Service Life..
※Insulated Silicone Sleeve: The Silicone Sleeve Prevents The Fan From Cooling The Heat Block And Helps Stabilize The Temperature..
※High Temperature Printing: 0.4Mm Hardened Steel Nozzle Is Made Of High Quality Hardened Steel Material With Higher Thermal Conductivity, Higher Strength, Stronger Oxidation Resistance And Longer Service Life, It Can Support High Temperature Filament ≤ 320℃, And The Removable Nozzle Is Easy To Replace And Saves Time..
※Compatible Bambu Lab A1/A1 Mini,This Is An Upgraded Version, Upgraded From The Original.The Original A1 Hot End Extrusion Head Does Not Have Replaceable Nozzles..
Features
- Kit Contents This 3d Printer Nozzle Hot End Kit Contains: Hot End, Nozzle, Heat Sink Block, Throat, Silicone Sleeve, 2 Wrenches.
- Compatible Bambu Lab A1/A1 Mini,This Is An Upgraded Version, Upgraded From The Original.The Original A1 Hot End Extrusion Head Does Not Have Replaceable Nozzles.
- High-Quality Materials: Nickel-Plated Brass Titanium Alloy Heating Block Has Good Heat Resistance, Abrasion Resistance, Corrosion Resistance And Long Service Life.
- High Temperature Printing: 0.4mm Hardened Steel Nozzle Is Made Of High Quality Hardened Steel Material With Higher Thermal Conductivity, Higher Strength, Stronger Oxidation Resistance And Longer Service Life, It Can Support High Temperature Filament 320 , And The Removable Nozzle Is Easy To Replace And Saves Time.
- Insulated Silicone Sleeve: The Silicone Sleeve Prevents The Fan From Cooling The Heat Block And Helps Stabilize The Temperature.
- See more on Amazon...
Brand: ACROSSXD | Manufacturer: ACROSSXD
See On Amazon #18
HICTOP Ceramic Heater and Thermistor for Bambu lab X1 Series 3D Printers
Asin: B0CPDTMFLW
3.Max Temperature Of The Bambu Lab X1 Thermistor: 300℃; Diameter: 1.3Mm ; The Length Is 95Mm.
5.Package List: Ceramic Heater*1，Thermistor*1, Thermal Grease*1, Retaining Clip*1.
4.The Ceramic Heater And Thermistor Are Compatible With Bambu Lab X1/ X1-Carbon 3D Printers..
2.The Thermistor Has Highly Accurate Temperature Measurement And Reliable Structural Design. It Is For Use With Bambu Lab Complete Hotend Assembly..
Features
- 1.The ceramic heater can heat the nozzle up to 300 , which is for use with Bambu Lab complete hotend assemby.
- 2.The thermistor has highly accurate temperature measurement and reliable structural design. It is for use with Bambu Lab complete hotend assembly.
- 3.Max temperature of the bambu lab X1 thermistor: 300 ; Diameter: 1.3mm ; The length is 95mm
- 4.The Ceramic Heater and Thermistor are compatible with Bambu Lab X1/ X1-Carbon 3D printers.
- 5.Package List: Ceramic Heater*1 Thermistor*1, Thermal Grease*1, Retaining Clip*1
- See more on Amazon...
Brand: HICTOP | Manufacturer: HIC Technology
See On Amazon #19
UP to 500C High Temperature Upgraded Hotend with Plated Copper Heater Block Titanium Heatbreak, Extra Hardened Steel Nozzle Compatible with BB X1 Carbon X1-Carbon Combo P1P 3D Printer (Hotend)
Asin: B0BMZZD5QK | Model: BL X1 Hotend | PartNumber: BL X1 Hotend
The Interference Of The Tc4 Titanium Heatbreak Tube And The Heat Block Increase S The Step Surface At The Bottom Of The Throat To Completely Eliminate The Phenomenon Of Falling Off And Reduces The Possibility Of Leakage..
Package: 1 Set Hotend , 1 Pc Extra Hardened Steel Nozzle 0.4Mm As Spare Part.
The Nozzle Is Connected By Thread, And In Contact With The Bottom Step Of The Heatbreak To Completely Solve The Phenomenon Of Falling Off And Reduce The Possibility Of Leakage. The Removable Nozzle Can Be Replaced Easily, Save Time..
The Radiator And Heat Break Can Be Disassembled And Locked By The Side Fixed Shaft To Reduce The Use Cost..
Features
- This Kit is Upgraded, the heating block upgraded to chromium-zirconium copper nickel plating treatment, high temperature resistance 500C degree printing, fast heat conduction.
- The radiator and heat break can be disassembled and locked by the side fixed shaft to reduce the use cost.
- The interference of the TC4 titanium heatbreak tube and the heat block increase s the step surface at the bottom of the throat to completely eliminate the phenomenon of falling off and reduces the possibility of leakage.
- The nozzle is connected by thread, and in contact with the bottom step of the heatbreak to completely solve the phenomenon of falling off and reduce the possibility of leakage. The removable nozzle can be replaced easily, Save time.
- Package: 1 set hotend , 1 pc extra hardened steel nozzle 0.4mm as spare part
- See more on Amazon...
Brand: HOCENWAY | Manufacturer: HoCenWay
See On Amazon #20
0.4mm A1 hotend heating Assembly, Bambu Lab A1 Mini Hotend Hardened Steel Hotend for A1 Carbon for BambuLab A1/ A1 Mini 3D Printers
Asin: B0D569PNXW
Quick Replacement Design: The A1 Mini Hotend Heating Component With A Magnetic Block, Can Quickly And Accurately Fix The Hotend To The Installation Position, Making It Easy And Convenient To Remove And Install The Hotend..
Note: Please Make Sure The Bambu A1 Mini Hotend Has Cooled Down Before Replacement, And Avoid Touching The Heating Block Under The Hot End To Prevent Burns..
Wide Compatibility: The A1 Mini Hotend Is For A Variety Of 3D Printing Materials: A1 Mini Works With 1.75 Mm Pla/ Abs/ Petg/ Tpu/ Wood Filament..
High-Performance Heating Element: This Bambu Lab A1 Mini Hotend Kit Is Compatible With The Bambu Lab A1 Mini 3D Printer, Equipped With An Advanced Heating Element That Rapidly Reaches The Desired Temperature, Ensuring A Stable And Efficient Printing Process..
Features
- Super Durable Material: This bambu a1 hotend kit is Upgraded, the heating block upgraded to chromium-zirconium copper nickel plating treatment, high temperature resistance 500C degree printing, fast heat conduction.
- High-Performance Heating Element: This bambu lab a1 mini hotend kit is compatible with the Bambu Lab A1 Mini 3D printer, equipped with an advanced heating element that rapidly reaches the desired temperature, ensuring a stable and efficient printing process.
- Quick Replacement Design: The A1 Mini hotend heating component with a magnetic block, can quickly and accurately fix the hotend to the installation position, making it easy and convenient to remove and install the hotend.
- Wide Compatibility: The A1 Mini hotend is for a variety of 3D printing materials: A1 Mini works with 1.75 mm PLA/ ABS/ PETG/ TPU/ Wood filament.
- Note: Please make sure the bambu a1 mini hotend has cooled down before replacement, and avoid touching the heating block under the hot end to prevent burns.
- See more on Amazon...
Brand: CHPOWER | Manufacturer: CHPOWER
See On Amazon
Looking For Something Else?
Search