10NM Damper Actuator for Operating,air Control dampers in Ventilation AC100...240V 50/60HZ (Size : Y10M24)
Asin: B0D2XJRM86 | Model: UYAAZVHJ | PartNumber: UYAAZVHJ | Ean: 6248448048992
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Brand: UYAAZVHJ | Manufacturer: UYAAZVHJ
Weight: 2.20 Pounds
See On Amazon Similar To 10NM Damper Actuator for Operatingair
#1
ECO-WORTHY 12 Volt 10 Inch Stroke Linear Actuator Heavy Duty 330lbs Maximum Lift with Mounting Brackets
Asin: B00NM8H5UA | Model: AM-TGF12V250-T-1 | PartNumber: AM-TGF12V250-T-1 | Ean: 0799441541219 | UPC: 799441541219
✔Quiet & Comfortable - Move At 5.7Mm/S, Silent And Stable, Make Sound Lower Than 50Db, Suit For Hospital And Massage. Built-In Safety Lock, Stop At Any Position In The Stroke..
✔Professional Team - Eco-Worthy Has Manufactured Linear Actuators For Years, Through Multiple Technical Testings, Ce Certificate. We Have A Professional And Experienced Technicians Team To Service You Within 24 Hours..
✔Safe - Over Current Protection, Overload Protection, Over-Voltage Protection, Over-Discharge Protection, Short Circuit Protection, Shock Protection..
✔Features - Aluminum Alloy Housing, Ip54 Rated Protection Sealed Against Dust, Water, And Corrosion Suitable For Outdoors Use. Internal Limit Switch, Automatically Switch Off When It Reaches In Case Of The Motor Idling..
Features
- Heavy Duty - The alloy-steel shaft accompanied by metal gears allows it to push and pull up to 330 lbs.It will be great to use the actuator with our controller, which helps to control your actuactor to Forward & Reverse.
- Features - Aluminum alloy housing, IP54 rated protection sealed against dust, water, and corrosion suitable for outdoors use. Internal limit switch, automatically switch off when it reaches in case of the motor idling.
- Quiet & Comfortable - move at 5.7mm/s, silent and stable, make sound lower than 50db, suit for hospital and massage. Built-in safety lock, stop at any position in the stroke.
- Safe - over current protection, overload protection, over-voltage protection, over-discharge protection, short circuit protection, shock protection.
- Professional Team - ECO-WORTHY has manufactured linear actuators for years, through multiple technical testings, CE certificate. We have a professional and experienced technicians team to service you within 24 hours.
- See more on Amazon...
Brand: ECO-WORTHY | Manufacturer: ECO-WORTHY
See On Amazon #2
Valemo VDM10, General Purpose Spring Return Damper Actuator and Motor, can Replace Honeywell M847D & Other Similar Damper Actuators, 24 VAC, No Switch
Asin: B08689W618 | Ean: 0859301005159 | UPC: 859301005159
Can Be Used In Either Normally Open (N.O.) Hvac Air Ducts, Or Normally Closed (N.C.) Venting Installations..
Installation: Direct Coupling To 5/16" Damper Shaft, Works Well On Both N.O. And N.C. Dampers..
Input Power: 24 Vac, 50/60 Hz..
Heavy-Duty Motor With All Metal Gears Inside, Stainless Steel Housing. Quality Tested For Over 150K Cycles Of Flawless Operations. Fixed 90-Degree Operation Angle (Stroke)..
Features
- VDM10 2-wire Spring return damper actuator motor is designed to be compatible with and drop-in replacement for following models: Honeywell's M847D, M847D1004, and old ARD and ZD series of damper motors. DuroZone #35105 damper Motor & similar HVAC spring-return 2-wire damper actuators by Zone First, Erie, and others.
- Heavy-duty motor with all METAL gears inside, stainless steel housing. Quality tested for over 150K cycles of flawless operations. Fixed 90-degree operation angle (stroke).
- Can be used in either Normally Open (N.O.) HVAC air ducts, or Normally Closed (N.C.) venting installations.
- Input power: 24 VAC, 50/60 Hz.
- Installation: Direct coupling to 5/16 damper shaft, works well on both N.O. and N.C. dampers.
- See more on Amazon...
Brand: Valemo | Manufacturer: Valemo
See On Amazon #3
DC HOUSE Linear Actuator 12V 1000N High Speed 10 Inch 10" Motor 14mm/s with Mounting Brackets Blcak
Asin: B07PN341M5 | Model: L11TGF1000NB250-T-1 | PartNumber: L11TGF1000NB250-T-1 | Ean: 0702131345547 | UPC: 702131345547
Great Performance: With Reliable Performance, Stable Running, The Same Characteristics Of Push And Pull, Good Environment Adaptability, Etc..
Professional Team: Dc House Has Been Manufacturing Linear Actuators For Many Years, Passing Several Technical Tests..
Application: Widely Used In Many Industries, Such As Electric Power, Machinery, Metallurgy, Mining, Petroleum, Chemical Industry, Transportation, Lifting, Construction, Food And Feed Processing, And So On..
Material: Aluminum Alloy Housing, Ip54-Rated Protection Sealed Against Dust, Water, And Corrosion Suitable For Outdoor Use. The Internal Limit Switch Automatically Switches Off When It Reaches In Case Of The Motor Idling..
Features
- Specification: stroke length: 10 inches(250mm); travel speed: 0.55in/sec(14mm/sec); retracted length: 370mm(15"); extended length: 620mm(25"); current draw: 3Amps.
- Material: aluminum alloy housing, IP54-rated protection sealed against dust, water, and corrosion suitable for outdoor use. The internal limit switch automatically switches off when it reaches in case of the motor idling.
- Great performance: with reliable performance, stable running, the same characteristics of push and pull, good environment adaptability, etc.
- Application: widely used in many industries, such as electric power, machinery, metallurgy, mining, petroleum, chemical industry, transportation, lifting, construction, food and feed processing, and so on.
- Professional team: DC HOUSE has been manufacturing linear actuators for many years, passing several technical tests.
- See more on Amazon...
Brand: DC HOUSE | Manufacturer: ECO LLC
See On Amazon #4
Hon&Guan 10 inch Backdraft Damper, One-Way Airflow Ducting Insert Backflow Preventer Duct Draft Blocker, HVAC Inline Fan Vent
Asin: B09WDGNRHT
【Wide Applications】Back Draught Valves Can Be Inserted Into Hvac Ducting Which Are Flexible Or Non-Flexible. Designed For Use With Range Hoods, Bathroom Fans, Kitchen And Other Home Hvac Applications..
【Backdraft Shutter】Hon&Guan Draft Blocker Designed To Improve Ventilation By Preventing Air From Re-Circulating When The Fans Are Not In Use, Rubber Ring Ensure 100% Closure And Quiet Closing..
【Lightweight Valve Wings】The Valve Wings Open Under The Pressure Created By The Airflow; When The Air Flows In The Opposite Direction, It Is Automatically Closed Under The Action Of The Spring, So As To Cut Off The Flow..
【Installation Method】The 10 Inch Backdraft Damper Has An Opening Of 250Mm And A Length Of 128Mm. When Installed Horizontally, The Springs Should Be Positioned Horizontally To Allow For Optimal Opening And Closing..
Features
- Material The 10 duct damper and the flap leaves is made of a Galvanized steel to withstand temperatures up to 140 F, the Axis are made of aluminum, while the spring are made of carbon steel.
- Installation method The 10 inch backdraft damper has an opening of 250mm and a length of 128mm. When installed horizontally, the springs should be positioned horizontally to allow for optimal opening and closing.
- Wide applications Back draught valves can be inserted into hvac ducting which are flexible or non-flexible. Designed for use with range hoods, bathroom fans, kitchen and other home HVAC applications.
- Lightweight valve wings The valve wings open under the pressure created by the airflow; when the air flows in the opposite direction, it is automatically closed under the action of the spring, so as to cut off the flow.
- Backdraft Shutter Hon&Guan Draft Blocker designed to improve ventilation by preventing air from re-circulating when the fans are not in use, rubber ring ensure 100% closure and quiet closing.
- See more on Amazon...
Brand: Hon&Guan | Manufacturer: Hon&Guan
Dimensions: 5.03 x 5.03 x 9.84 inches | Weight: 1.10 Pounds
See On Amazon #5
Draft Blocker - 10'' Inch Backdraft Damper Duct - Draft Stopper - Backflow Preventer - Inline Fan Vent - Vent Deflector (10'' Inch)
Asin: B08FBCVNN5 | Ean: 4605098011363
Installation: The Backflow Flap Is Installed By Inserting It Into The Ventilation Pipe Until It Stops. The Position Of The Spring Should Be Horizontal For Horizontal Installations So That It Can Open And Close Optimally. The Backdraft Shutter Is Installed So That The Damper Blades Open Only In The Outflowing Air Direction..
Back Draught Valves Can Be Inserted Into Ventilation Ducts Which Are Flexible Or Non Flexible. Cannot Be Used With Plastic Ducts As The Sizes Are Different..
The Backflow Flap Opens And Closes Automatically At Low Air Volumes. It Has A Smooth-Running Spring And An Internal Foam Strip To Keep The Blades From Rattling And Can Be Installed Horizontally Or Vertically.
Damper Has 2 Valves, Designed For Use In Air Conditioners (Ac), Dryers, Exhaust, Extractor Or Range Hoods, Heating Ducts, Vents And Other Hvac Applications.
Features
- Back draft damper is made for insertion into inch ventilation ducts. The backflow damper RKI opens and closes automatically. It has a strong spring and can be installed either horizontally or vertically. The flap is suitable for retrofitting, since it is completely inside the duct
- Damper has 2 valves, designed for use in air conditioners (AC), dryers, exhaust, extractor or range hoods, heating ducts, vents and other HVAC applications
- INSTALLATION: The backflow flap is installed by inserting it into the ventilation pipe until it stops. The position of the spring should be horizontal for horizontal installations so that it can open and close optimally. The Backdraft shutter is installed so that the damper blades open only in the outflowing air direction.
- The backflow flap opens and closes automatically at low air volumes. It has a smooth-running spring and an internal foam strip to keep the blades from rattling and can be installed horizontally or vertically
- Back draught valves can be inserted into ventilation ducts which are flexible or non flexible. Cannot be used with plastic ducts as the sizes are different.
- See more on Amazon...
Brand: ERA Group | Manufacturer: ERA Group
See On Amazon #6
10-in HVAC Duct Manual Volume Damper with Sleeve - Galvanized Sheet Metal Round Volume Damper Airflow Ducting Branch, Adjustment Handle HVAC Air Balancing System - Easy to Install
Asin: B00AVRIZBS | Model: SHMVD261012 | PartNumber: SHMVD261012 | Ean: 0687384261069 | UPC: 687384261069
Balancing Airflow: Balancing Dampers Are Simply Manual Dampers Encased In A Galvanized Sheet Metal Sleeve. Each Branch Should Have A Balancing Damper Installed. That Way, It's Possible To Regulate The Airflow By Adjusting The Position Of The Damper. They Should Be Located In Areas That Are Easily Accessible For Adjustment. The Ductwork Regulates The Flow Of Air And Redirects It To Specific Places Of A House..
100% Satisfaction: We Are Willing For The Satisfaction Of Our Customers Because Customer Satisfaction Is Our First Priority. If You Have Any Kind Of Problem Regarding Our Product We Will Fully Co-Operate In Solving Your Problem. You Should Never Feel Any Hesitation In Contacting Us. If You Don't Satisfy With Our Products, Then Please Question Us We Will Happily Answer Your Question..
Duct Installation Tips And Trick: To Install Damper Sleeves, You Simply Slide The Sleeve Into The Item You Are Attaching To And Fasted With Sheet Metal Screws, And Conceal The Seam With Duct Tape. We Do Recommend That You Seal Around All Sheet Metal To Sheet Metal Connections With A Duct Sealant To Prevent Air Leakage, And Increase The Efficiency Of Your Hvac System. This Damper Does Not Have A 100% Seal It's Used For Air Balancing, Not Air Termination..
Features
- High Quality: Our Damper & Sleeves are made from Galvanized Steel. All sleeves fabricated from galvanized steel meeting ASTM-A-653-96 standards, by the latest edition of SMACNA gauges and construction standards. It can also be used for wind protection. Designed for use in AC, dryer vent, exhaust, extractor, heating systems, fans, vents, and other residential, commercial, and industrial HVAC applications.
- Duct Installation Tips and Trick: To install Damper Sleeves, you simply slide the sleeve into the item you are attaching to and fasted with sheet metal screws, and conceal the seam with duct tape. We do recommend that you seal around all sheet metal to sheet metal connections with a duct sealant to prevent air leakage, and increase the efficiency of your HVAC system. This damper does not have a 100% seal it's used for air balancing, not air termination.
- Balancing Airflow: Balancing dampers are simply manual dampers encased in a galvanized sheet metal sleeve. Each branch should have a balancing damper installed. That way, it's possible to regulate the airflow by adjusting the position of the damper. They should be located in areas that are easily accessible for adjustment. The ductwork regulates the flow of air and redirects it to specific places of a house.
- 100% Satisfaction: We are willing for the satisfaction of our customers because customer satisfaction is our first priority. If you have any kind of problem regarding our product we will fully co-operate in solving your problem. You should never feel any hesitation in contacting us. If you don't satisfy with our products, then please question us we will happily answer your question.
- See more on Amazon...
Brand: The Sheet Metal Kid | Manufacturer: Snappy
Dimensions: 10.00 x 8.00 x 10.00 inches | Weight: 2.00 Pounds
See On Amazon #7
JQDML 10 Inch 10" Stroke Heavy Duty 3000N/660lbs Linear Actuator 12V Electric Actuator 0.2"/s with Mounting Brackets for Window Opener,Door Opener,Home Automation
Asin: B0BZPCGHJF
⚙️【Features】Protection Class: Ip65 ;Noise Level Below 50Db ;Ambient Temperature:-20° C To +60°C;With Reliable Performance, Stable Running, The Same Characteristics Of Push And Pull, And Good Environment Adaptability Etc..
⚙️【Package Included】1Pc Dc 12V Linear Actuator And 2Pcs Mounting Brackets..
⚙️【Wide Application】Linear Actuator Can Be Widely Used In Industrial Electric Lifting System, Electric Bed, Traction Bed, Electric Sofa, Electric Lifting Lever, Electric Booth,Electric Sunroof,Solar Tracker Etc..
⚙️【High Quality】The Linear Actuator Is Made Of High Quality Aluminum;With High Performance Motor And Built-In Limit Switch,It Can Be Stopped At Any Position And Automatically Stop At The Top,With Self-Locking Function..
Features
- Specification Voltage:12V DC;Stroke Length:10"(250mm),Retracted length: 15"(380mm), Extended Length:25"(630mm); No load speed: 0.2 "/sec (5mm/s), Maximum Load:660lbs(3000N);Maximum current draw:4A.
- High quality The linear actuator is made of high quality aluminum;with high performance motor and built-in limit switch,it can be stopped at any position and automatically stop at the top,with self-locking function.
- Features Protection class: IP65 ;Noise level below 50dB ;Ambient temperature:-20 C to +60 C;with reliable performance, stable running, the same characteristics of push and pull, and good environment adaptability etc.
- Wide application Linear actuator can be widely used in industrial electric lifting system, electric bed, traction bed, electric sofa, electric lifting lever, electric booth,electric sunroof,solar tracker etc.
- Package included 1PC DC 12V Linear Actuator and 2PCS Mounting Brackets.
- See more on Amazon...
Brand: JQDML | Manufacturer: JQDML
See On Amazon #8
Speedi-Products AC-VDQ 10 10-Inch Diameter GalvanizedDuct Volume Damper w/Quad
Asin: B0085UZELM | Model: AC-VDQ 10 | PartNumber: AC-VDQ 10 | Ean: 0787447095096 | UPC: 787447095096
Field Installed Into Sheet Metal Starting Collars Or Register Boots.
Consult Your Local Building Codes For Approved Installation Practices.
Ideal For Use In Branch Duct Lines For Adjusting Supply Or Return Air Volume.
Features
- 10-Inch Galvanized Sheet Metal Round volume damper with manual quadrant adjustment handle
- Ideal for use in branch duct lines for adjusting supply or return air volume
- Field installed into sheet metal starting collars or register boots
- Consult your local building codes for approved installation practices
- See more on Amazon...
Brand: Speedi-Products | Manufacturer: Applied Applications International
Dimensions: 0.75 x 11.50 x 10.00 inches | Weight: 2.15 Pounds
Warranty: 1 Year
See On Amazon #9
Replacement for Honeywell M847D Damper Actuator Motor
Asin: B07ZPCN5GL | Model: HD-MOTOR-ALT | PartNumber: HD-MOTOR-ALT
Brand: Jackson Systems | Manufacturer: Jackson Systems
Dimensions: 8.00 x 4.00 x 6.00 inches | Weight: 0.00 Pounds
See On Amazon #10
Honeywell ARD10TZ Round Automatic Damper, 10"
Asin: B01D0BTA5G | Model: ARD10TZ | PartNumber: ARD10TZ | Ean: 0085267461191 | UPC: 085267461191
Can Be Field-Converted When Used As An Independent Zone Or For Fresh Air Intake.
Rated To Operate Up To 1-Inch Wc.
Designated As Power Closed/Spring Return Open Damper For Use With Honeywell Zoning Systems.
Features
- Features galvanized steel with single-blade damper, which closes off tightly against gasket for minimal leakage
- Designated as power closed/spring return open damper for use with Honeywell Zoning Systems
- Can be field-converted when used as an independent zone or for fresh air intake
- Rated to operate up to 1-inch wc
- See more on Amazon...
Brand: Honeywell | Manufacturer: Honeywell
Dimensions: 13.00 x 12.00 x 12.00 inches | Weight: 5.00 Pounds
See On Amazon
Looking For Something Else?
Search