L5/L10/15/20/25/30cm Length Stainless Steel Tube with Grease Nozzle for 4mm Shaftr RC Boat Drive Accessory (Size : Dia.4mm-L15cm)
Asin: B0D2XQJMFD | Model: DingMotuo | PartNumber: DingMotuo | Ean: 7774580040550
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.The Shaft Sleeve Tube With High Concentricity..
With Grease Oil Nozzle.
Product: 4Mm Stainless Steel Marine Boat Shaft Sleeve Tuber.
New Design, Applied Stainless Stell, And High Precision Manufacture..
Features
- This product is store own workshop design and produce. Welcome for bulk order.
- New design, applied stainless stell, and high precision manufacture.
- The Shaft sleeve tube with high concentricity.
- Product: 4mm Stainless Steel Marine Boat Shaft Sleeve Tuber
- With Grease Oil nozzle
- See more on Amazon...
Brand: DingMotuo | Manufacturer: DingMotuo
Weight: 0.44 pounds
See On Amazon Similar To L5 L10 15 20 25
#1
Hirificing TPS Sensor Throttle Body Position Sensor Replaces OEM #17123855 17123852 213-4668 213-912 977-030, Compatible with Chevrolet GMC Buick Century Savana Silverado Sierra C1500 K2500
Asin: B0CQCBDT9H | Model: Hirificing-JQMCGQ01 | PartNumber: Hirificing-JQMCGQ01
【Easy To Install】Our Throttle Body Sensor, Although This Is Not A True Oem Part, Installs And Works Just Like The Factory Part. It Requires No Tools And Is Very Easy To Install, Just Remove The Old Parts And Install The New Ones, Saving You A Lot Of Money And Time..
【Long-Term Use】This 213-4668 Tps Throttle Position Sensor Is Made From High Quality Plastic Material With A Redesigned Housing And Circuit Board To Better Withstand Extreme Temperatures And Vibration, Making It Rugged And Durable, And While This Is Not A True Oem Part, It Meets Or Exceeds What It Replaces And Can Be Directly Replaced..
【Safe Driving】This Tps Sensor 17123855 Is A Device Used To Monitor Engine Conditions. Monitor Whether The Engine Is Idling, Loading, Accelerating Or Decelerating. It Is Located At The Throttle Body In The Engine Compartment Of The Vehicle And Monitors The Speed At Which The Driver Presses The Accelerator Pedal To Make Driving Safer..
【Compatible Models】This Tps Sensor Kit Compatible With Chevrolet, Gmc, Buick, Century, Regal, Skylark, Rendezvous, Cadillac Deville, Seville, Escalade, Silverado, Malibu, Monte Carlo, Blazer, Astro, Impala, Venture, Lumina, S10, Tahoe, Cavalier, C1500/K1500, C2500/K2500, C3500/K3500, Gmc Savana, C1500, Yukon, Sonoma, Jimmy, Safari, Sierra And More..
Features
- OEM Part Number OEM part numbers for the throttle position sensor are 2134668, 213912, 213913, 213914, 219187, 2131653, 25319901, 17123855, 17123852, 17125483, 38574877, 17113578, 17113625, 1712 5483, 17106809, 8171238520, 8171068090, 8171254830, 88893282, 853678T, 977 -030, 5S12003, TH149, TPS4235, SS10382 TPS140.
- Compatible Models This TPS sensor kit compatible with Chevrolet, GMC, Buick, Century, Regal, Skylark, Rendezvous, Cadillac Deville, Seville, Escalade, Silverado, Malibu, Monte Carlo, Blazer, Astro, Impala, Venture, Lumina, S10, Tahoe, Cavalier, C1500/K1500, C2500/K2500, C3500/K3500, GMC Savana, C1500, Yukon, Sonoma, Jimmy, safari, Sierra and more.
- Easy to Install Our throttle body sensor, although this is not a true OEM part, installs and works just like the factory part. It requires no tools and is very easy to install, just remove the old parts and install the new ones, saving you a lot of money and time.
- Safe Driving This tps sensor 17123855 is a device used to monitor engine conditions. Monitor whether the engine is idling, loading, accelerating or decelerating. It is located at the throttle body in the engine compartment of the vehicle and monitors the speed at which the driver presses the accelerator pedal to make driving safer.
- long-term Use This 213-4668 TPS throttle position sensor is made from high quality plastic material with a redesigned housing and circuit board to better withstand extreme temperatures and vibration, making it rugged and durable, and while this is not a true OEM part, it meets or exceeds what it replaces and can be directly replaced.
- See more on Amazon...
Brand: Hirificing | Manufacturer: Hirificing
Dimensions: 0.72 x 2.11 x 2.07 inches | Weight: 0.03 pounds
See On Amazon #2
LLII Car Windshield Wiper Washer Fluid Cap for Toyota, Windshield Wiper Fluid Reservoir Tank Bottle Leakage Protection Cap Cover Replacement for Toyota Venza, RAV4, Highlander, OEM #85316-48060
Asin: B0CWQ8R37L | Model: LLII-AUTO-03 | PartNumber: LLII-AUTO-03
【Sealing Function】The Windshield Washer Fluid Reservoir Cap For Toyota Can Replace Old Or Broken Caps To Prevent Car Water Tanks From Overflowing Or Leaking. It Has Good Sealing Performance And Perfectly Matches The Original Car. Helping You Save Repair Costs And Time..
【Easy To Install】Our Windshield Washer Reservoir Cap Measures 2.95×2.36 Inches And Has An Inner Diameter Of 1.95 Inches, No Tools Required, Just Remove The Old Washer Reservoir Cap And Replace It With A New One Directly. Please Check Carefully After Installation To Ensure That The Cap And Bottle Mouth Are Well Sealed To Avoid Leakage..
【High Quality Material】The Windshield Washer Fluid Reservoir Bottle Tank Cap Is Made Of High-Quality Abs Material, Reinforced And Upgraded, Leak-Proof, Waterproof And Dust-Proof, Easy To Clean, It Will Not Be Easily Damaged Or Broken During Work..
【Applicable Model】Our Washer Fluid Cap Is Perfectly Suitable For 2009-2015 Toyota Venza, 2012-2018 Toyota Rav4, 2001-2013 Toyota Highlander, 2008-2015 Scion Xb, 2016-2018 Lexus Gs450h , 2007-2015 Lexus Rx350, 2016-2018 Lexus Gs350, 2004-2006 Lexus Rx330..
Features
- Perfect Replacement Our windshield wiper fluid cap meets original auto parts standards and can directly replace the washer cap with OEM number 85316-48060. Please confirm your washer fluid reservoir cap model before purchasing to avoid Purchase error.
- Applicable Model Our washer fluid cap is perfectly suitable for 2009-2015 Toyota Venza, 2012-2018 Toyota RAV4, 2001-2013 Toyota Highlander, 2008-2015 Scion xB, 2016-2018 Lexus GS450h , 2007-2015 Lexus RX350, 2016-2018 Lexus GS350, 2004-2006 Lexus RX330.
- Sealing Function The windshield washer fluid reservoir cap for toyota can replace old or broken caps to prevent car water tanks from overflowing or leaking. It has good sealing performance and perfectly matches the original car. helping you save repair costs and time.
- High Quality Material The windshield washer fluid reservoir bottle tank cap is made of high-quality ABS material, reinforced and upgraded, leak-proof, waterproof and dust-proof, easy to clean, it will not be easily damaged or broken during work.
- Easy to Install Our windshield washer reservoir cap measures 2.95 2.36 inches and has an inner diameter of 1.95 inches, no tools required, just remove the old washer reservoir cap and replace it with a new one directly. Please check carefully after installation to ensure that the cap and bottle mouth are well sealed to avoid leakage.
- See more on Amazon...
Brand: LLII | Manufacturer: LLII
Dimensions: 0.75 x 2.94 x 2.40 inches | Weight: 0.02 pounds
See On Amazon #3
Car Rear View Mirror Cover, Pink Car Accessories decorations Interior RearView Mirror Protector Frame for Women Girls Man Gift, Automotive Rearview Mirror Edge Protective Cover for Car, SUV, Truck
Asin: B0CZKZ2V3F | Model: UZZH-Auto036 | PartNumber: UZZH-Auto036
【Personalized Decoration】: The Furry Appearance Is Very Warm And Cute, It Can Effectively Decorate And Embellish Your Car, Making Your Car More Unique And Personalized. This Pink Car Accessory Is Very Suitable As A Gift For Women And Girls..
【Wide Application】: This Car Decorations Interior Rearview Mirror Protector Adopts Elastic Design And Is Suitable For Most Cars, Trucks, Suvs, Vans, Etc. On The Market. In Addition, You Can Also Use It As A Fixed Hairband When Applying Makeup..
【Wide Application】: This Car Decorations Interior Rearview Mirror Protector Adopts Elastic Design And Is Suitable For Most Cars, Trucks, Suvs, Vans, Etc. On The Market. In Addition, You Can Also Use It As A Fixed Hairband When Applying Makeup..
【High Quality Material】: The Rearview Mirror Protective Cover Is Made Of Super Soft Plush Material, Which Is Soft And Comfortable, Wear-Resistant And Scratch-Resistant, Easy To Clean, Does Not Block The Field Of View, And Supports Long-Term Use..
Features
- Protection Function : The car rearview mirror cover can provide comprehensive protection for your rearview mirror, effectively preventing rearview mirror collisions, scratches, cracks, etc., and can also cover up the original aging rearview mirror frame.
- High Quality Material : The rearview mirror protective cover is made of super soft plush material, which is soft and comfortable, wear-resistant and scratch-resistant, easy to clean, does not block the field of view, and supports long-term use.
- Personalized Decoration : The furry appearance is very warm and cute, it can effectively decorate and embellish your car, making your car more unique and personalized. This pink car accessory is very suitable as a gift for women and girls.
- Wide Application : This car decorations interior rearview mirror protector adopts elastic design and is suitable for most cars, trucks, SUVs, vans, etc. on the market. In addition, you can also use it as a fixed hairband when applying makeup.
- Wide Application : This car decorations interior rearview mirror protector adopts elastic design and is suitable for most cars, trucks, SUVs, vans, etc. on the market. In addition, you can also use it as a fixed hairband when applying makeup.
- See more on Amazon...
Brand: UZZH | Manufacturer: UZZH
Dimensions: 0.60 x 7.00 x 1.40 Inches | Weight: 0.03 pounds
Warranty: Manufacturer warranty for 30 days from date of purchase.
See On Amazon #4
Hirificing Car Seat Belt Buckle Protector Cover, 2PCS Leather Pad Safety Belt Clamp Guard Silencer Chest Clip Holster Trim, Anti-Scratch Auto Interior Replacement Accessories for Most Vehicles (Red)
Asin: B0CNPP5CRB | Model: Hirificing-KT01 | PartNumber: Hirificing-KT01
【Widely Applicable】The Leather Car Seat Belt Silencer Clip Holster Is Universal Automotive Interior Accessories That Are Suitable For Most Vehicles, Including Cars, Trucks, Suvs, Rvs, Etc. The Size Is 3.26×1.88 Inches, To Avoid Unnecessary Waste, Please Check Whether The Dimensions Match Before Purchasing..
【Exquisite Design】The Anti-Scratch Safety Belt Clamp Guard Pad Is Designed With Hand-Stitched Leather. The Detailed Hemming Design Is Fashionable And Luxurious. It Is A Very Practical And Exquisite Car Interior Accessory And A Favorite Among Car Modification Enthusiasts..
【Easy To Install】Our Car Seat-Belt Clips Accessories Is Small And Exquisite. Easy To Install, No Need To Change The Original Car Design. Just Tear Off The Tape Stuck Inside The Leather Seat Belt Buckle Cover, Put In The Seat Belt Buckle And Slowly Adjust The Position..
【Premium Leather】Our Auto Seat Belt Buckle Protector Is Made Of High-Quality Soft Pu Material, Which Is Waterproof And Dustproof, Is Lightweight And Durable, Has A Smooth Surface, And Feels Comfortable To The Touch, And It Doesn't Fade Or Crack Easily..
Features
- Silencer& Protector Our seat belt buckle cover can not only reduce the impact sound of the safety buckle when unfastening the seat belt, but also protect the seat belt buckle from bumps and scratches during application, providing effective protection for the seat belt buckle.
- Premium Leather Our auto seat belt buckle protector is made of high-quality soft PU material, which is waterproof and dustproof, is lightweight and durable, has a smooth surface, and feels comfortable to the touch, and it doesn't fade or crack easily.
- Widely Applicable The leather car seat belt silencer clip holster is universal automotive interior accessories that are suitable for most vehicles, including cars, trucks, SUVs, RVs, etc. The size is 3.26 1.88 inches, to avoid unnecessary waste, please check whether the dimensions match before purchasing.
- Easy to Install Our car seat-belt clips accessories is small and exquisite. Easy to install, no need to change the original car design. Just tear off the tape stuck inside the leather seat belt buckle cover, put in the seat belt buckle and slowly adjust the position.
- Exquisite Design The anti-scratch safety belt clamp guard pad is designed with hand-stitched leather. The detailed hemming design is fashionable and luxurious. It is a very practical and exquisite car interior accessory and a favorite among car modification enthusiasts.
- See more on Amazon...
Brand: Hirificing | Manufacturer: Hirificing
Dimensions: 0.15 x 3.26 x 1.88 inches | Weight: 0.02 pounds
See On Amazon #5
Hirificing 4PCS Radio Removal Pry Tool Kit, U/V-Shaped Stainless Steel Scratch Auto Interior Disassembly and Assembly Removal Tool Set for Most Car Audio Frequency Converter (U/V)
Asin: B0CSYDPFCJ | Model: Hirificing-CX01 | PartNumber: Hirificing-CX01
【Easy To Operate】These Car Radio Removal Tool Kits Have A Small Notch On Each Side. Just Compress Slightly And Push Them Into The Radio Hole, When They Slide Over The Latch They Make A Really Nice Clicking Sound Then The Radio Main Unit Can Be Pulled Out Effortlessly. If It Doesn't Move, Reinsert The Tool And Try Again..
【Universal Fit】These Car Radio Removal Pry Tool Sets Include Four Disassembly Tools, Which Is A Sufficient Quantity. It Is Widely Used In Most Vehicles Equipped With Cd Dvd Audio And Radio Equipment, Such As Volkswagen, Audi, Mercedes-Benz, Such As Cars, Rvs, Station Wagons, Mpvs And Suvs..
【Ergonomic Design】Our Car Audio Disassembly And Assembly Tools Have A Smooth Surface And Are Comfortable To The Touch, Heavy-Duty Tools Yet Lightweight And Convenient. They Feature An Ergonomic Design That's Easy To Grip And Effortless To Use. Compressing Slightly When Pressure Is Applied, They Spring Back To Their Original Shape Once Removed..
【Heavy Duty Design】These Radio Removal Tools Are Made Of High-Quality Heavy-Duty Metal Stainless Steel, Not Easy To Rust, Bend Or Break, Sturdy And Durable, Have A Certain Weight And Can Be Used Multiple Times, Making Them An Ideal Tool Choice For Radio Removal..
Features
- Professional Tools Our radio removal tool is a professional car audio removal pry tool that saves time and effort than wires or clothes hangers, making radio disassembly simpler, easier and faster, and will not damage or scratch the main unit or scratch your fingers.
- Heavy Duty Design These radio removal tools are made of high-quality heavy-duty metal stainless steel, not easy to rust, bend or break, sturdy and durable, have a certain weight and can be used multiple times, making them an ideal tool choice for radio removal.
- Easy to Operate These car radio removal tool kits have a small notch on each side. Just compress slightly and push them into the radio hole, when they slide over the latch they make a really nice clicking sound then the radio main unit can be pulled out effortlessly. If it doesn't move, reinsert the tool and try again.
- Ergonomic Design Our car audio disassembly and assembly tools have a smooth surface and are comfortable to the touch, heavy-duty tools yet lightweight and convenient. They feature an ergonomic design that's easy to grip and effortless to use. Compressing slightly when pressure is applied, they spring back to their original shape once removed.
- Universal Fit These car radio removal pry tool sets include four disassembly tools, which is a sufficient quantity. It is widely used in most vehicles equipped with CD DVD audio and radio equipment, such as Volkswagen, Audi, Mercedes-Benz, such as cars, RVs, station wagons, MPVs and SUVs.
- See more on Amazon...
Brand: Hirificing | Manufacturer: Hirificing
Dimensions: 0.13 x 4.60 x 2.60 Inches | Weight: 0.11 pounds
See On Amazon #6
UZZH 14MM Magnetic Spark Plug Socket Set, 3/8" Drive x 12" Extended Swivel Thin Wall Spark Plug Removal Tool with 12 Point, Professional Car Accessories Spark Wrench for BMW, Mini, Nissan and More
Asin: B0D12R9VQ3 | Model: UZZH-Auto036 | PartNumber: UZZH-Auto036
【Specifications】: This 14Mm Magnetic Rotating Spark Plug Tool Features A 12-Point Thin Wall Design, Which Is Thinner Than A Standard 6-Point Spark Plug Socket, With An Inner Diameter Of 3/8 Inch (9.4Mm) Driver And An Overall Length Of 12X0.7 Inches..
【Wide Application】: The 14Mm Spark Plug Socket Is Compatible With Mini Vehicles Such As Bmw, Benz, Nissan And Mini. Please Confirm Whether This Specification Is Suitable For Your Car Before Purchasing.
【Easy To Use】: The Spark Plug Sleeve Is Very Easy To Use, Just Put The Spark Plug Into The Socket And Make Sure It Is Fully Engaged In The Sleeve. Turn Clockwise To Tighten, Turn Counterclockwise To Loosen..
【High Quality】: The Spark Plug Socket Is Made Of High-Quality Chromium Vanadium Steel Material, Which Has High Hardness, Wear Resistance And Durability, Is Not Easy To Rust And Corrode, And Has A Long Service Life. It Is An Essential Tool For Removing And Installing Spark Plugs..
Features
- Professional Spark Plug Tool : The extended spark plug removal tool adopts a strong magnetic design inside and a 360 flexible rotating head, allowing it to easily work in narrow areas, effectively saving time and money in going to the repair shop.
- High Quality : The spark plug socket is made of high-quality chromium vanadium steel material, which has high hardness, wear resistance and durability, is not easy to rust and corrode, and has a long service life. It is an essential tool for removing and installing spark plugs.
- Specifications : This 14mm magnetic rotating spark plug tool features a 12-point thin wall design, which is thinner than a standard 6-point spark plug socket, with an inner diameter of 3/8 inch (9.4mm) driver and an overall length of 12x0.7 inches.
- Easy to Use : The spark plug sleeve is very easy to use, just put the spark plug into the socket and make sure it is fully engaged in the sleeve. Turn clockwise to tighten, turn counterclockwise to loosen.
- Wide Application : The 14mm spark plug socket is compatible with mini vehicles such as BMW, Benz, Nissan and MINI. Please confirm whether this specification is suitable for your car before purchasing
- See more on Amazon...
Brand: UZZH | Manufacturer: UZZH
Dimensions: 0.70 x 12.00 x 0.70 inches | Weight: 0.49 pounds
Warranty: Manufacturer warranty for 30 days from date of purchase.
See On Amazon #7
Hood Pins Kit for Car - Hood Latch Kit with Racing Lanyard, Stainless Hood Pin Lock Clip for Fixing Car Hood and Reduce Wobble, Universal Car Mods Exterior Accessories Fits Most Car Truck SUV(Silver)
Asin: B0CXX7XC4P | Model: MLAHUIER-Auto17 | PartNumber: MLAHUIER-Auto17
【Package Included】You Will Receive 2 Threaded Pins, 2 Hooks, 4 Nuts, 2 Washers, 2 Racing Lanyards And 8 Small Screws..
【Thread Size】The Bottom Threaded Pin Of The Hood Pin Is 4 Inches Long And The Thread Size Is 2 1/2 Inches, Also Comes With A 24-Inch Race Lanyard With Safety Pin, Suitable For Most Cars, Trucks, Suv Hoods On The Market Modification And Use..
【Installation Tips】This Hood Pin Kit Is Suitable For Truck Hood Pins With Carbon Fiber Covers. It Does Not Need To Be Tightened Too Much When Installing, It Will Not Loosen, Over-Tightening May Cause The Hood To Deform..
【High Quality Material】 The Hood Pin Plate Lock Is Made Of High Quality Stainless Steel Material, And The Pin Base Is Made Of Aluminum Alloy Material, Which Has High Hardness, Acid And Alkali Resistance, Is Strong And Not Easy To Deform, And Has A Long Service Life..
Features
- Fixing Car Hood Cover The hood pin helps your car hood close perfectly. When facing rough roads, the hood can minimize vibrations and will not open easily in case of impact, protecting your engine compartment and improving driving safety.
- High Quality Material The hood pin plate lock is made of high quality stainless steel material, and the pin base is made of aluminum alloy material, which has high hardness, acid and alkali resistance, is strong and not easy to deform, and has a long service life.
- Package Included You will receive 2 threaded pins, 2 hooks, 4 nuts, 2 washers, 2 racing lanyards and 8 small screws.
- Installation Tips This hood pin kit is suitable for truck hood pins with carbon fiber covers. It does not need to be tightened too much when installing, it will not loosen, over-tightening may cause the hood to deform.
- Thread Size The bottom threaded pin of the hood pin is 4 inches long and the thread size is 2 1/2 inches, also comes with a 24-inch race lanyard with safety pin, suitable for most cars, trucks, SUV hoods on the market Modification and use.
- See more on Amazon...
Brand: MLAHUIER | Manufacturer: MLAHUIER
Dimensions: 2.49 x 4.13 x 2.49 inches
See On Amazon #8
Hirificing Cowboy Hat Holder Mounts for Truck Car, Vehicle Hard Hat Storage Rack Hanger for Dashboard Wall Seat Windshield with Suction Cup and Handmade Rope to Fix & Keep Hat Shape (Gray)
Asin: B0CNKCP959 | Model: Hirificing-MJ01 | PartNumber: Hirificing-MJ01
【Easy To Install】The Installation Of Our Hard Hat Rack Suction Cup Does Not Require Any Tools, The Suction Cup Adsorption Installation Will Not Leave Any Traces Of Damage To Your Car. Makes It Easier To Store Your Cowboy Hats, Very Flexible And Can Be Quickly Disassembled And Easily Transferred To Another Place For Use In Less Than 3 Seconds..
【Practical Gift】The Sombrero Holder For Travel Is Cleverly Designed And Does Not Take Up Space. Whether You're A Truck Driver, A Cowboy Or Just Want To Accessorize Your Car, This Hat Rack Is A Must-Have Truck Accessory. Our Cowboy Hat Stand Is A Cute And Practical Little Gift For Family And Friends During Various Holidays, Christmas Or Birthday Parties..
【Widely Used】Our Dashboard Cowboy Hat Holder Is Suitable For All Kinds Of Vehicles. It Can Fix The Hat On The Seat Or Dashboard, Door, Wall, Windshield. It Is Installed Firmly And Will Not Fall Off. Additionally, You Can Attach The Suction Cups To Smooth Door Panels Or Walls. You Can Also Secure Your Cowboy Hat To Your Bedroom, Office, Garage, Hotel Room, And More..
【Fix And Keep Shape】The Hat Mount For Car Is Widely Used In Various Cars, Suvs, And Trucks. The Lanyard Of The Car Hat Holder Is Handmade From Cotton Rope, Which Can Effectively Maintain The Shape Of The Hat And Prevent It From Wearing Or Deforming. This Car Hat Rack Fits Most Hats Such As Cowboy Hats, Bucket Hats, Baseball Bats And More..
Features
- Strong Adsorption Our cowboy hat holder for truck features a suction cup design that ensures a secure grip to keep your hat in place even on bumpy rides. The suction cup is made of high-quality ABS plastic, which is strong and durable and not easy to age or break.
- Fix and Keep Shape The hat mount for car is widely used in various cars, SUVs, and trucks. The lanyard of the car hat holder is handmade from cotton rope, which can effectively maintain the shape of the hat and prevent it from wearing or deforming. This car hat rack fits most hats such as cowboy hats, bucket hats, baseball bats and more.
- Easy to Install The installation of our hard hat rack suction cup does not require any tools, the suction cup adsorption installation will not leave any traces of damage to your car. Makes it easier to store your cowboy hats, very flexible and can be quickly disassembled and easily transferred to another place for use in less than 3 seconds.
- Widely Used Our dashboard cowboy hat holder is suitable for all kinds of vehicles. It can fix the hat on the seat or dashboard, door, wall, windshield. It is installed firmly and will not fall off. Additionally, you can attach the suction cups to smooth door panels or walls. You can also secure your cowboy hat to your bedroom, office, garage, hotel room, and more.
- Practical Gift The sombrero holder for travel is cleverly designed and does not take up space. Whether you're a truck driver, a cowboy or just want to accessorize your car, this hat rack is a must-have truck accessory. Our cowboy hat stand is a cute and practical little gift for family and friends during various holidays, Christmas or birthday parties.
- See more on Amazon...
Brand: Hirificing | Manufacturer: Hirificing
Weight: 0.13 pounds
Warranty: Manufacturer warranty for 7 days from date of purchase.
See On Amazon #9
Hirificing 4PCS Car Mirror Anti Rain Protective Film, Anti Glare & Anti Fog Rainproof & Waterproof HD Nano Coating Hydrophobic Sticker for Side Window & Rear View Mirror (5.31 3.74 Inch)
Asin: B0CNR9YJ31 | Model: Hirificing-JM01 | PartNumber: Hirificing-JM01
【Safe Driving】Our Anti Rain Sticker For Car Mirror Is A High-Definition Nano Safe Driving Sticker With Good Transparency And Clear Vision, Helping You Predict The Rear Environment And Avoid Driving Dangers. It Can Also Protect Your Rearview Mirror From Scratches And Dirt..
【Widely Applicable】Our Hydrophobic Mirror Film Is Designed For Most Car Rearview Mirrors, Suitable For Cars, Buses, Taxis, Trucks, Trailers, Motorcycles, Etc. You Can Cut It Into The Size Or Shape You Want, Diy Your Own Car Rearview Mirror Film, It Is Recommended To Replace It Every Three Months..
【Easy To Install】The Clear Safe Driving Sticker Is Easy To Install. First Use The Cleaning Cloth In The Package To Wipe The Dust And Dirt On The Rearview Mirror, Then Sprinkle Some Water Or Spray Some Alcohol On The Back Of The Waterproof Film, Stick The Protective Film On The Mirror And Discharge The Air, And Finally Tear It Off Blue Protective Film..
【Rainproof】The Anti Fog Glare Car Mirror Protector Is A Hydrophobic Film That Can Quickly Spread Water Droplets. It Has Anti-Fog, Waterproof, And Rainproof Functions, Providing You With A Safe And Clear Vision And Ensure Driving Safety In Rainy Days..
Features
- Anti-glare Our car rearview mirror waterproof film is made of three layers of high-quality PET protective film and two layers of upgraded nano-adhesive layers. It has high light transmittance and anti-glare. It can also prevent strong direct light reflection and reduce glare even at night.
- Rainproof The anti fog glare car mirror protector is a hydrophobic film that can quickly spread water droplets. It has anti-fog, waterproof, and rainproof functions, providing you with a safe and clear vision and ensure driving safety in rainy days.
- Safe Driving Our anti rain sticker for car mirror is a high-definition nano safe driving sticker with good transparency and clear vision, helping you predict the rear environment and avoid driving dangers. It can also protect your rearview mirror from scratches and dirt.
- Easy to Install The clear safe driving sticker is easy to install. First use the cleaning cloth in the package to wipe the dust and dirt on the rearview mirror, then sprinkle some water or spray some alcohol on the back of the waterproof film, stick the protective film on the mirror and discharge the air, and finally tear it off blue protective film.
- Widely Applicable Our hydrophobic mirror film is designed for most car rearview mirrors, suitable for cars, buses, taxis, trucks, trailers, motorcycles, etc. You can cut it into the size or shape you want, DIY your own car rearview mirror film, it is recommended to replace it every three months.
- See more on Amazon...
Brand: Hirificing | Manufacturer: Hirificing
Dimensions: 0.02 x 5.31 x 3.74 inches
See On Amazon #10
UZZH Engine Coolant Temperature Sensor, ECT Coolant Temp Sensor Replace 15404280 12191170 60811520 12608814 for Car Compatible with Delphi Chevy GMC Cadillac Buick (Gold)
Asin: B0D2XQXB7W | Model: UZZH-LQYG01 | PartNumber: UZZH-LQYG01
【Function】: The Temperature Sensor Can Detect Engine Temperature In Real Time And Transmit Accurate Data To The Car's Ecu, Effectively Solving Problems Such As Difficulty In Starting, Weak Acceleration, And Black Smoke From The Exhaust. It Is The Best Replacement For Aging Or Damaged Temperature Sensors..
【Easy To Install】: The Oil Temperature Sensor Is Very Simple To Install, Using A Plug-And-Play Design To Ensure It Can Be Easily Installed By One Person, Effectively Saving You A Lot Of Money And Time In Going To The Repair Shop..
【High Quality Material】: This Sensor De Temperatura For Car Is Made Of High Quality Brass Material, Which Is Sturdy And Durable, Not Easy To Break Or Deform, Works Stably And Has A Long Service Life. Even If The Engine Is Running At High Temperatures, It Can Still Work Accurately And Reliably..
【Compatible Models】: Coolant Temp Sensor Compatible With Delphi 2010-2016 Lacrosse, 2011-2015 Regal, 2004-2019 Cts, 2002-2020 Escalade, 2002-2006 Avalanche 1500; Gmc 2005-2009 Envoy, 1999-2014 Sierra, 2000-2015 Yukon; Cadillac 2004-2015 Cts, 2003-2015 E Scalade ; Buick 2005-2007 Rainier, 2006-2007 Rendezvous; Chevy - 2004-2011 Chevy Aveo, 1998-2015 Chevy Camaro, 2006-2015 Chevy Express, 1999-2014 Chevy Silverado, 2000-2015 Chevy Tahoe, 2006-2009 Chevy Trailblazer Etc..
Features
- OEM Replacement : This car engine coolant temperature sensor replaces OEM# 15404280 12191170 60811520 12608814. Please confirm whether this model matches your car before purchasing.
- Compatible Models : Coolant temp sensor Compatible with Delphi 2010-2016 Lacrosse, 2011-2015 Regal, 2004-2019 CTS, 2002-2020 Escalade, 2002-2006 Avalanche 1500; GMC 2005-2009 Envoy, 1999-2014 Sierra, 2000-2015 Yukon; Cadillac 2004-2015 CTS, 2003-2015 E scalade ; Buick 2005-2007 Rainier, 2006-2007 Rendezvous; Chevy - 2004-2011 Chevy Aveo, 1998-2015 Chevy Camaro, 2006-2015 Chevy Express, 1999-2014 Chevy Silverado, 2000-2015 Chevy Tahoe, 2006-2009 Chevy Trailblazer etc.
- Function : The temperature sensor can detect engine temperature in real time and transmit accurate data to the car's ECU, effectively solving problems such as difficulty in starting, weak acceleration, and black smoke from the exhaust. It is the best replacement for aging or damaged temperature sensors.
- High Quality Material : This sensor de temperatura for car is made of high quality brass material, which is sturdy and durable, not easy to break or deform, works stably and has a long service life. Even if the engine is running at high temperatures, it can still work accurately and reliably.
- Easy to Install : The oil temperature sensor is very simple to install, using a plug-and-play design to ensure it can be easily installed by one person, effectively saving you a lot of money and time in going to the repair shop.
- See more on Amazon...
Brand: UZZH | Manufacturer: UZZH
Dimensions: 0.74 x 2.25 x 0.74 inches | Weight: 0.05 pounds
Warranty: Manufacturer warranty for 30 days from date of purchase.
See On Amazon #11
HFBTE Integrating Sound Decibel Meter Sound Level Meter Statistical Noise Level Meter with IEC 61672 Class 1 Range 25 dB(A) to 140dB(A) Self-generated Noise <18 dBA Frequency Range 10 Hz to 20 kHz
Asin: B0D1CCTL3V | Model: 2024041008dara | PartNumber: 2024041008dara
◆Measure Parameters:Lfp, Lsp, Lip,Leq,T, Lpeak, Leq,T, Lfmax, Lfmin,Lsmax,Lsmin,Limax,Limin,Sel,Lex8h,Lavg,Twa,Dose,L5,L10,L50,L90, L95,Sd,Ts,Tm, Volt,Date,Time,E..
◆Integrating Function◆Statistical Analysis Function.
◆Outputs:Ac, Dc, Rs 232, Usb◆Time Weighting:F, S, I, Peak.
{Key Features}---------◆Small And Light Weight, Fit In A Pocket◆Latest Digital Signal Processing Technology◆Wide Dynamic Range◆Rs232 Output Is Available◆Wide Warm Design, Operating Temperature From -15 ℃ To 50 ℃◆Complies With Iec 61672 Class 1.
Features
- {Application}--------- Widely use in Industrial Noise Surveys; machinery, vehicles, ships and etc Community and industrial noise measurement Checking compliance with noise rating recommendations Traffic noise measurment
- {Key Features}--------- Small and light weight, fit in a pocket Latest Digital Signal Processing Technology Wide Dynamic Range RS232 output is available Wide Warm Design, Operating Temperature from -15 to 50 Complies with IEC 61672 Class 1
- Measure Parameters:LFp, LSp, LIp,Leq,t, Lpeak, Leq,T, LFmax, LFmin,LSmax,LSmin,LImax,LImin,SEL,Lex8h,LAVG,TWA,DOSE,L5,L10,L50,L90, L95,SD,Ts,Tm, Volt,Date,Time,E.
- Outputs:AC, DC, RS 232, USB Time Weighting:F, S, I, Peak
- Integrating Function Statistical Analysis Function
- See more on Amazon...
Brand: HFBTE | Manufacturer: HFBTE
Dimensions: 1.02 x 9.29 x 2.48 inches | Weight: 4.41 pounds
See On Amazon #12
Hirificing Black Rear View Mirror Trim for Tesla Model 3 Y X S Semi 2014-2024, Interior Rearview Mirror Protector Silicone Screen Edge Frame Cover Decoration Trim Frame, Car Accessories (Black)
Asin: B0CZMP83GB | Model: Hirificing-AUTO-27 | PartNumber: Hirificing-AUTO-27
【Model 3 / Y / X / S】This Mirror Protector Frame Measures 7.48 × 2.16 Inches, Is Elastic, And Can Be Perfectly Mounted On The Rearview Mirror Of All Tesla Model 3/Y/X/S. Suitable For American Driving Design, Fit For 2024-2017 Tesla Model 3, 2024-2019 Tesla Model Y, 2023-2016 Tesla Model X, 2023-2014 Tesla Model S..
【Simple Installation】Our Silicone Mirror Screen Edge Frame Is Installed Flush-Mounted, Which Does Not Affect Your Ability To Observe The Vehicles And Road Conditions Behind You. It Is Easy To Install, Just Place The Silicone Protective Frame Along The Edge Of The Car Rearview Mirror And Adjust Angles..
【Silicone Material】Our Mirror Edge Protective Cover Is Made Of Environmentally Friendly Silicone, Which Is Non-Toxic, Odorless, Flexible, Not Easy To Break, And Can Be Pulled And Adjusted At Will. It Is Non-Slip And Wear-Resistant, Will Not Scratch Your Mirror, Is Waterproof And Easy To Clean..
【Decoration Gift】The Rearview Mirror Protection Cover Is A Simple Car Decoration Accessory. It Is Available In Red, Pink, Black, White, And Gray Colors. It Is Warm And Personalized. It Will Make You Feel Happy Every Time You Look At The Rearview Mirror. It Makes A Great Gift For Decorating Car..
Features
- Protector Frame Our car rear view mirror trim can provide comprehensive protection for the rearview mirror, reduce external damage to the mirror caused by scratches, collisions, pollution, etc., and extend the use time of the rearview mirror.
- Decoration Gift The rearview mirror protection cover is a simple car decoration accessory. It is available in red, pink, black, white, and gray colors. It is warm and personalized. It will make you feel happy every time you look at the rearview mirror. It makes a great gift for decorating car.
- Model 3 / Y / X / S This mirror protector frame measures 7.48 2.16 inches, is elastic, and can be perfectly mounted on the rearview mirror of all Tesla Model 3/Y/X/S. Suitable for American driving design, fit for 2024-2017 Tesla Model 3, 2024-2019 Tesla Model Y, 2023-2016 Tesla Model X, 2023-2014 Tesla Model S.
- Silicone Material Our mirror edge protective cover is made of environmentally friendly silicone, which is non-toxic, odorless, flexible, not easy to break, and can be pulled and adjusted at will. It is non-slip and wear-resistant, will not scratch your mirror, is waterproof and easy to clean.
- Simple Installation Our silicone mirror screen edge frame is installed flush-mounted, which does not affect your ability to observe the vehicles and road conditions behind you. It is easy to install, just place the silicone protective frame along the edge of the car rearview mirror and adjust angles.
- See more on Amazon...
Brand: Hirificing | Manufacturer: Hirificing
Dimensions: 0.37 x 7.15 x 2.37 inches | Weight: 0.02 pounds
See On Amazon #13
Hirificing 4PCS Spider Web Car Cup Holder Coaster, 2.75 Inch Silicone Non-Slip Insert Car Drink Decor Pads, Universal Eco-Friendly Gothic Interior Accessories for Men Women (Pink
Asin: B0CQMXHK12 | Model: Hirificing-BD01 | PartNumber: Hirificing-BD01
【Hold Water Droplets】The Raised Spider Web Design On Our Coasters Provides Space To Catch Condensation And Spills From Your Drinks, Keeping Your Tabletop As Dry As Possible While Also Providing Scratch-Proof Protection For Any Type Of Furniture. These Coasters Are Great For Protecting Wood, Stainless Steel Tables From Stains..
【Widely Used】Our Non-Slip Spider Web Cup Mat Fits All Types Of Drinking Glasses, Coffee Mugs, Tea Cups And Flasks. Not Only Suitable For Most Car Cup Holders, But Also Suitable For Offices, Kitchens, Bathrooms And Other Places As Placemats, Vase Mats, Soap Pads, Etc..
【Premium Material】 Our 2.75 Inch Car Drink Cup Pads Is Made Of Environmentally Friendly And High-Quality Silicone, Which Is Safe, Odorless, Flexible And Wear-Resistant And Will Not Fade Even If They Are Exposed To High Temperatures For A Long Time. If There Are Stains On The Coaster, Rinse It With Water And It Will Look Like New..
【Anti-Slip & Shock Absorption】The Spider Webs Of These Silicone Car Coasters Increase Friction And Have Strong Grip, So The Cup Will Not Slip Easily When Placed On It. The Coaster Has A Certain Thickness And Weight, So It Won't Stick To The Drink Cup Easily When You Raise The Glass.Coasters Can Also Reduce The Noise The Cup Makes When Shaken..
Features
- Spider Web Design Our car cup holder coasters are designed with spider webs and are engraved with exquisite spider web patterns on both sides, giving them a fashionable element of the Gothic theme. They are very practical whether for Halloween or everyday, making them a creative spooky gift.
- Anti-slip & Shock Absorption The spider webs of these silicone car coasters increase friction and have strong grip, so the cup will not slip easily when placed on it. The coaster has a certain thickness and weight, so it won't stick to the drink cup easily when you raise the glass.Coasters can also reduce the noise the cup makes when shaken.
- Hold Water Droplets The raised spider web design on our coasters provides space to catch condensation and spills from your drinks, keeping your tabletop as dry as possible while also providing scratch-proof protection for any type of furniture. These coasters are great for protecting wood, stainless steel tables from stains.
- Premium Material Our 2.75 inch car drink cup pads is made of environmentally friendly and high-quality silicone, which is safe, odorless, flexible and wear-resistant and will not fade even if they are exposed to high temperatures for a long time. If there are stains on the coaster, rinse it with water and it will look like new.
- Widely Used Our non-slip spider web cup mat fits all types of drinking glasses, coffee mugs, tea cups and flasks. Not only suitable for most car cup holders, but also suitable for offices, kitchens, bathrooms and other places as placemats, vase mats, soap pads, etc.
- See more on Amazon...
Brand: Hirificing | Manufacturer: Hirificing
Weight: 0.13 pounds
Warranty: Manufacturer warranty for 7 days from date of purchase.
See On Amazon
Looking For Something Else?
Search