Leefasy Misting System Sprayer Nozzle with Tee Connector Bendable Nozzle Wear Resistant Water Misting Nozzle for Humidification Patio, 15m Pipe 30cm Nozzle
Asin: B0D3WG3Y6R
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.* 【Garden Tool】: The Misting System Is Practical For Gardening, Plant Watering, Landscaping, Irrigation System, Air Humidification..
* 【Flexible Bendable】: The Sprayer Nozzle Can Be Bent And Fixed At Any 360 Degrees, Which Is Convenient For Adjusting Where The Water Spraying Is Needed And Specifying The Direction..
* 【Functional】: The Misting Cooling System Can Withstand Up To 10 Kg Of Pressure, It Is Designed For Long Term Use. Its Nozzle And Tube Offer Wonderful Durability And An Atomization Effect..
* 【Material】: The Sprayer Nozzle Set Is Made Of Pe And Metal Material, Enduring Durability And Longevity..
Features
- * Atomization Range : Tighten clockwise: 0.5-1 meter; loosen counterclockwise spraying 1-3 meters.
- * Material : The Sprayer Nozzle Set is made of PE and metal material, enduring durability and longevity.
- * Garden Tool : The Misting System is practical for gardening, plant watering, Landscaping, Irrigation System, Air humidification.
- * Functional : The Misting Cooling System can withstand up to 10 kg of pressure, it is designed for long term use. Its Nozzle and tube offer wonderful durability and an atomization effect.
- * Flexible Bendable : The Sprayer Nozzle can be bent and fixed at any 360 degrees, which is convenient for adjusting where the water spraying is needed and specifying the direction.
- See more on Amazon...
Brand: Leefasy | Manufacturer: Leefasy
See On Amazon Similar To Leefasy Misting System Sprayer Nozzle
#1
Petutu 32 Pack Brass Misting Nozzles For Outdoor Cooling System, 0.012 Orifice (0.3 mm) 10/24 UNC
Asin: B071WJSXP6 | Model: Aootech-6-5 | PartNumber: Aootech-6-5
Screw Into Any 10/24-Threaded Mist Nozzle Opening..
Minimal Water Use Of 1/2 Gph Per Nozzle..
Operation Pressure:4-70Kg/Cm (60-995 Psi) Flow Rate:80-145L/Min (21-38Gpm)..
High Quality: Made Of Brass,Never Rust. Best Choice For Outdoor Use With Cold Water..
Features
- 320PCS Brass Misting Nozzles For Outdoor Cooling System, Greenhouse, Landscaping and Dust Control.
- High Quality: Made of Brass,Never Rust. Best Choice For Outdoor Use With Cold Water.
- Screw Into Any 10/24-Threaded Mist Nozzle Opening.
- Operation Pressure:4-70kg/Cm (60-995 psi) Flow Rate:80-145l/Min (21-38GPM).
- Minimal Water Use Of 1/2 GPH Per Nozzle.
- See more on Amazon...
Brand: Aootech | Manufacturer: Aootech
Warranty: Manufacturer warranty for 90 days from date of purchase.
See On Amazon #2
HOMENOTE 10 Pack Brass Misting Nozzles for Outdoor Cooling System
Asin: B07NZTDYBP
【Wide Application】Necessary Accessories To Make Misting Cooling System, Fan Misting System, Plant Watering System..
【Suitable For 1/4" Tubing】Us Standard Size, Adapted To 1/4 Inch Pe Pu Tubing..
【Easy To Install】Instruction Is Included. Just Need 2 Steps In 3 Seconds To Install..
【Misting Cooling Effectively】Misting Range: 20-40 Inch, Cools The Surrounding Air Temperatures Up To 20 Degrees..
Features
- Brass Mist Nozzles Made of brass material, anti-rust and mist effectively. The misting connector is made of sturdy recyclable plastic material, which is good sealing and leakproof.
- Misting Cooling Effectively Misting range: 20-40 inch, cools the surrounding air temperatures up to 20 degrees.
- Wide Application Necessary accessories to make misting cooling system, fan misting system, plant watering system.
- Easy to Install Instruction is included. Just need 2 steps in 3 seconds to install.
- Suitable for 1/4 Tubing US standard size, adapted to 1/4 inch PE PU tubing.
- See more on Amazon...
Brand: homenote | Manufacturer: HOMENOTE
Dimensions: 1.38 x 4.84 x 3.70 inches
See On Amazon #3
HOMENOTE 20 Pack Brass Misting Nozzles and 5 Pack Misting Nozzle Tees for Outdoor Cooling System, Misting Nozzle Replacements for 1/4 inch tubing
Asin: B0CR1GSXPB | Model: MS-nozzles-CT | PartNumber: MS-nozzles-CT
【Wide Application】Our Misting Nozzles Are Necessary Accessories For Creating A Misting Cooling System, Fan Misting System, And Plant Watering System. They Are Ideal For Use In Your Lawn, Yard, Porch, Gazebo, Greenhouse, Garden, Umbrella, Shade Sail, Livestock Farm, Trampoline, And Many Other Patio Outside Places..
【Suitable For 1/4" Tubing】Our Misting Nozzles Are Adapted To 1/4 Inch Pu Pe Pvc Tubing, Which Is A Us Standard Size. This Makes It Easy For You To Find Compatible Tubing And Ensures A Hassle-Free Installation Process..
【Easy To Install】With Just 2 Steps In 3 Seconds, You Can Have Your Misting System Up And Running In No Time..
【Misting Cooling Effectively】With A Misting Range Of 20-40 Inches, Our Misting Nozzles Can Cool Down Outdoor Areas And Maintain The Surrounding Temperature At A Comfortable 23°C/73°F, Making Your Summer Days More Enjoyable..
Features
- Brass Mist Nozzles Made of high-quality brass material, 0.0197" Orifice, 10/24 UNC. These nozzles are anti-rust and mist effectively, ensuring long-lasting use.
- Misting Cooling Effectively With a misting range of 20-40 inches, our misting nozzles can cool down outdoor areas and maintain the surrounding temperature at a comfortable 23 C/73 F, making your summer days more enjoyable.
- Wide Application Our misting nozzles are necessary accessories for creating a misting cooling system, fan misting system, and plant watering system. They are ideal for use in your lawn, yard, porch, gazebo, greenhouse, garden, umbrella, shade sail, livestock farm, trampoline, and many other patio outside places.
- Easy to Install With just 2 steps in 3 seconds, you can have your misting system up and running in no time.
- Suitable for 1/4 Tubing Our misting nozzles are adapted to 1/4 inch PU PE PVC tubing, which is a US standard size. This makes it easy for you to find compatible tubing and ensures a hassle-free installation process.
- See more on Amazon...
Brand: homenote | Manufacturer: HOMENOTE
Dimensions: 0.62 x 3.35 x 3.15 Inches
See On Amazon #4
Brass Misting Nozzles for Garden Cooling System 0.012" (0.3 mm) 10/24 UNC (20 PCS)
Asin: B01L3N8NHO | Model: KUWAN | PartNumber: KUWAN | Ean: 0756970097877 | UPC: 756970097877
Operation Pressure: 20-70Kg/Cm, Flow Rate: 80-145Ml/Min.
Leak-Proof, Self-Sealing O-Ring Included With Each Brass Nozzle; No Tape Or Sealant Is Required.
Minimal Water Use Of 1/2 Gallon Of Water Per Hour Per Mist Nozzle.
High Quality: Made Of Brass, Never Rust. The Bras Nozzle Is The Best Choice For Outdoor Use With Cold Water.
Features
- Brass / SS 0.012 inches (0.3 mm) orifice, screw Into any 10/24-threaded mist nozzle opening
- High Quality: made of brass, never rust. the bras nozzle is the best choice for outdoor use with cold water
- Operation Pressure: 20-70kg/cm, flow Rate: 80-145ml/min
- Minimal water use of 1/2 gallon of water per hour per mist nozzle
- Leak-proof, self-sealing o-ring included with each brass nozzle; no tape or sealant is required
- See more on Amazon...
Brand: KUWAN | Manufacturer: KUWAN
Dimensions: 0.74 x 2.50 x 2.50 Inches | Weight: 0.11 Pounds
See On Amazon #5
POCKET PANDA 20Pcs Brass Mister Nozzles for Outside Patio Misting, Nozzle for Misters Outdoor Cooling System, Mist Replacement Head. Garden Hose Parts Accessories. 0.016" Orifice (0.4 MM) 10/24 Unc
Asin: B09X33XBYT
【High Cost Performance】Made Of High-Quality Metal Material, The Mister Nozzle Has An Excellent Atomization Effect And Non-Clogging. Producing A Softer Mist, Thereby Generating An Excellent Cooling Mist In The Hot Summer..
【Ideal Mister Replacement Head】The Brass Garden Hose Sprayer Nozzles Are Easy To Install, Which Can Be Easily Screw Into Any 10/24 Unc Threaded Mist Nozzle..
【0.016” Orifice/0.4 Mm】The Thread Of The Nozzle Is 10/24 Unc, Which Is Widely Matched With A Variety Of Spray Equipment. For Example, 1/4"" I Joints, 1/4"" Steering Tee Joints, Vertical Atomizing Nozzle Joints, Etc..
【Premium Brass】The Patio Misting Hose Spray Nozzle Is Made Of Brass With Stainless Steel Orifice, Leak-Proof, Sturdy And Durable, Never Rusty. Ideal For Outdoor Use With Cold Water..
Features
- Widely Used in Various Misting Systems The misting nozzles is widely applied to outdoor misters cooling system, agriculture irrigation mister system, green house, deodorizing air purification, landscaping, small fountain, etc.
- Premium Brass The patio misting hose spray nozzle is made of brass with stainless steel orifice, leak-proof, sturdy and durable, never rusty. Ideal for outdoor use with cold water.
- High cost performance Made of high-quality metal material, the mister nozzle has an excellent atomization effect and non-clogging. Producing a softer mist, thereby generating an excellent cooling mist in the hot summer.
- 0.016 Orifice/0.4 mm The thread of the nozzle is 10/24 UNC, which is widely matched with a variety of spray equipment. For example, 1/4 I joints, 1/4 steering tee joints, vertical atomizing nozzle joints, etc.
- Ideal Mister Replacement Head The brass garden hose sprayer nozzles are easy to install, which can be easily screw into any 10/24 UNC threaded mist nozzle.
- See more on Amazon...
Brand: POCKET PANDA | Manufacturer: POCKET PANDA
See On Amazon #6
Aootech Brass Misting Nozzles for Outdoor Cooling System 22 pcs,0.012" Orifice (0.3 mm) 10/24 UNC
Asin: B01K40RFFI | Model: FBA_Aootech_NE_Brass | PartNumber: FBA_Aootech_NE_Brass
Screw Into Any 10/24-Threaded Mist Nozzle Opening..
Minimal Water Use Of 1/2 Gallon Of Water Per Hour Per Nozzle..
Operation Pressure:20-70Kg/Cm. Flow Rate:80-145Ml/Min..
High Quality: Made Of Brass,Never Rust. Best Choice For Outdoor Use With Cold Water..
Features
- High Cost Performance:20pcs+2pcs(Extra Bonus)=22pcs.
- High Quality: Made of Brass,Never Rust. Best Choice For Outdoor Use With Cold Water.
- Screw Into Any 10/24-Threaded Mist Nozzle Opening.
- Operation Pressure:20-70kg/Cm. Flow Rate:80-145ml/Min.
- Minimal Water Use Of 1/2 Gallon Of Water Per Hour Per Nozzle.
- See more on Amazon...
Brand: Aootech | Manufacturer: Aootech
Dimensions: 0.39 x 3.00 x 2.50 Inches | Weight: 0.10 Pounds
See On Amazon #7
Brass Misting Nozzle, 10 Pack High Pressure Spray Misting Nozzle 10/24 UNC Outdoor Anti-drip Fogging Spray Head Misting System Nozzle for Landscaping Outdoor Cooling System (0.012 Orifice)
Asin: B08B84X2MF | Ean: 0614405151276 | UPC: 614405151276
▶ ▶ ▶ Dimension: Brass / Ss 0.012 Inches (0.3 Mm) Orifice, Easily Screw Into Any 10/ 24 Unc Threaded Mist Nozzle Opening.
▶ ▶ ▶ Buy With Confidence: Rest Assured To Buy. If You Have Any Problem With Our Product, Contact Us! We Promise That We Will Make Every Effort To Solve It.
▶ ▶ ▶ Operation Pressure Is 20-80Kg/Cm, Flow Rate 80-145Ml/Min.
▶ ▶ ▶ Package: 10Pcs X Garden Spray Misting Nozzle.
Features
- Material: The mist system filter made of Brass, never rust
- Package: 10pcs x garden spray misting nozzle
- Dimension: Brass / SS 0.012 inches (0.3 mm) orifice, easily screw into any 10/ 24 UNC threaded mist nozzle opening
- Operation Pressure is 20-80kg/cm, Flow Rate 80-145ml/min
- BUY WITH CONFIDENCE: Rest assured to buy. If you have any problem with our product, contact us! We promise that we will make every effort to solve it
- See more on Amazon...
Brand: RESNSTAR
See On Amazon #8
9 Pieces Spray Nozzle Tips Multifunctional Spray Combination Adjustable Sprayer Nozzles Replacement Garden Sprayer Part Pump Sprayer Nozzle for Replacing Backpack Farm Water Pump Orchard Garden Nozzle
Asin: B09K7KLYCQ
Waterproof Connection: Pump Sprayer Nozzle Tips Are Equipped With O Ring For Waterproof And No Leak Connection, Sufficient Quantity Can Meet Your Daily Use Requirements, And The Good Packaging Can Keep Them Safe In The Process Of Transportation, Suitable For Most Sprayer Models, You Can Determine Your Own Sprayer Model Before Buying, If You Are Not Sure Whether It Is Suitable, You Can Consult Us.
Appropriate Dimensions For Usage: The Diameter Of The Round Hole At The Connection Of Backpack Sprayer Tips Is 1.4 Cm / 0.55 Inch, The Moderate Size Is Convenient For You To Use In Various Work, Please Carefully Measure The Size Of Your Nozzle Before Purchase.
Broadly Applicable: Backpack Sprayer Nozzle Can Be Connected To Water Tubes, Widely Applied For Watering Gardens, Washing Dogs, Washing Floors, Washing Cars, Cleaning Fences, Washing Clods, Cleaning Lanes, And More; They Can Also Be Connected To Sprayers For Practical Usages In Communities, Airports And Other Places.
Diverse Styles: Multifunctional Spray Nozzles For Pump Sprayers Contain 9 Diverse Styles, Including Single Nozzle, Double Nozzles, Fan Nozzle, Straight Steel Nozzle, Rotating Nozzle, 3 Hole Nozzle, 4 Hole Pattern Nozzle, 5 Hole Pattern Nozzle And 8 Hole Windproof Nozzle; The Water Can Transform From Thin Fog To Powerful Jets, Meeting Your Demand From High Pressure Cleaning To A Garden Hose.
Features
- Use with confidence: replacement sprayer nozzles are made of quality plastic, they are made of exquisite workmanship, sturdy, and can be applied for a long time, which can satisfy your various work needs, and please pay attention to the size when buying
- Diverse styles: multifunctional spray nozzles for pump sprayers contain 9 diverse styles, including single nozzle, double nozzles, fan nozzle, straight steel nozzle, rotating nozzle, 3 hole nozzle, 4 hole pattern nozzle, 5 hole pattern nozzle and 8 hole windproof nozzle; The water can transform from thin fog to powerful jets, meeting your demand from high pressure cleaning to a garden hose
- Waterproof connection: pump sprayer nozzle tips are equipped with O ring for waterproof and no leak connection, sufficient quantity can meet your daily use requirements, and the good packaging can keep them safe in the process of transportation, suitable for most sprayer models, you can determine your own sprayer model before buying, if you are not sure whether it is suitable, you can consult us
- Broadly applicable: backpack sprayer nozzle can be connected to water tubes, widely applied for watering gardens, washing dogs, washing floors, washing cars, cleaning fences, washing clods, cleaning lanes, and more; They can also be connected to sprayers for practical usages in communities, airports and other places
- Appropriate dimensions for usage: the diameter of the round hole at the connection of backpack sprayer tips is 1.4 cm / 0.55 inch, the moderate size is convenient for you to use in various work, please carefully measure the size of your nozzle before purchase
- See more on Amazon...
Brand: CHENGU | Manufacturer: Chengu
Weight: 0.02 Pounds
See On Amazon #9
HisweetH 20Packs Misting Nozzles 10/24 UNC Mister 0.4mm(0.016Inch) Brass Misting Nozzles Replacement Low Pressure Atomizing Misting Sprayer Outdoor Cooling Mister System for Patio Outdoor
Asin: B07V1ZYCKG | Ean: 0717877539457 | UPC: 717877539457
Dimension: Thread Size Is Unc 10-24, Orifice Diameter Is 0.4Mm.
Leak-Proof, Self-Sealing O-Ring Included With Each Brass Nozzle; No Tape Or Sealant Is Required.
Easy To Install: The Brass Misting Nozzles Are Easy To Install, Which Can Be Easily Screw Into Any 10/24 Unc Threaded Mist Nozzle Opening.
Wide Usage: Widely Apply For Garden, Patio, Lawn Misting System, Outdoor Cooling, Greenhouse, Humidification, Spraying Disinfectant, Epidemic Prevention, Deodorant Air Purification, Small Fountain, Outdoor Cooling System, Agriculture Irrigation System, Etc..
Features
- High Quality Material: The misting nozzles are made of brass with stainless steel orifice, anti-rust, durable, leak-proof, the mister nozzle is best choice for outdoor use with cold water
- Wide Usage: Widely apply for garden, patio, lawn misting system, outdoor cooling, greenhouse, humidification, spraying disinfectant, epidemic prevention, deodorant air purification, small fountain, outdoor cooling system, agriculture irrigation system, etc.
- Dimension: Thread size is UNC 10-24, Orifice diameter is 0.4mm
- Easy to Install: The brass misting nozzles are easy to install, which can be easily screw into any 10/24 UNC threaded mist nozzle opening
- Leak-proof, self-sealing o-ring included with each brass nozzle; no tape or sealant is required
- See more on Amazon...
Brand: HisweetH | Manufacturer: HisweetH
See On Amazon #10
Misting Nozzles Kit Include Water Misting Nozzle Tees Thread 1/4 Inch and Brass Orifice Nozzle with Black Plug for Outdoor Spray Cooling System (72 Pieces)
Asin: B09376SX3V
Durable Quality: Our Spray Cooling Device Made Of Quality Material, The Misting Nozzle Tee Connector Is Made Of Pom Material, Sturdy And Long-Lasting, The Misting Nozzles Is Made Of Brass Material, Not Easy To Rust And Corrode.
Effective For Cooling: These Brass Misting Nozzle Tees Kit Are Suitable For Use In Summer, It Can Effectively Reduce The Outdoor Temperature; The Sprayed Fine Water Mist Can Reduce The Temperature By 20 Degrees, It Is The Nice Accessory For Outdoor Occasions.
Simple Operation: These Water Misting Cooling Nozzle Set Are Easy To Install, Just Connect Suitable Water Pipes To Both Ends And Screw On The Nozzles, Water Mist Can Be Produced After Turning On The Water Source.
Product Dimension: Each Tees Thread Can Be Connected By Many Kinds Tube Which Is 1/4 Inch; The Nozzle Orifice Diameter Is 0.01 Inch, The Operation Pressure Is 2-70 Kg/ Cm, The Sprayed Water Mist Is Uniform And Fine, Energy-Saving And Water-Saving, Without Electricity.
Features
- Sufficient quantity: we provide you with 30 pieces water misting nozzle tees, 36 pieces brass nozzles and 6 pieces black plugs, sufficient quantity is enough for daily use and replacement, nice accessories can be replaced at will, bringing more convenience
- Product dimension: each tees thread can be connected by many kinds tube which is 1/4 inch; The nozzle orifice diameter is 0.01 inch, the operation pressure is 2-70 kg/ cm, the sprayed water mist is uniform and fine, energy-saving and water-saving, without electricity
- Durable quality: our spray cooling device made of quality material, the misting nozzle tee connector is made of POM material, sturdy and long-lasting, the misting nozzles is made of brass material, not easy to rust and corrode
- Simple operation: these water misting cooling nozzle set are easy to install, just connect suitable water pipes to both ends and screw on the nozzles, water mist can be produced after turning on the water source
- Effective for cooling: these brass misting nozzle tees kit are suitable for use in summer, it can effectively reduce the outdoor temperature; The sprayed fine water mist can reduce the temperature by 20 degrees, it is the nice accessory for outdoor occasions
- See more on Amazon...
Brand: Ripeng | Manufacturer: Ripeng
Weight: 0.67 pounds
See On Amazon #11
20 Pack Brass Misting Nozzles Tees, Brass Spray Nozzles for Greenhouse Landscaping Humidification, Dust Control Mist Nozzle Sprinkler for Outdoor Cooling System 0.012 Orifice (0.3 mm) 10/24 UNC Garden
Asin: B07DSY1BPH | Ean: 0614405150972 | UPC: 614405150972
★★★ Operation Pressure: 20-70Kg/Cm; Flow Rate: 80-145Ml/Min.
★★★ Leak-Proof, Self-Sealing O-Ring Included With Each Nozzle, Easy To Install.
★★★ Minimal Water Use: 1/2 Gallon Of Water Per Hour Per Nozzle.
★★★ Best Choice For Outdoor Use With Could Water: Widely Apply For Landscaping, Outdoor Cooling System, Greenhouse, Humidification, Spraying Disinfectant, Epidemic Prevention, Deodorant Air Purification, Small Fountain, Etc.
Features
- Brass / SS 0.012 inches (0.3 mm) orifice, easily screw into any 10/ 24 UNC threaded mist nozzle opening
- BEST CHOICE FOR OUTDOOR USE WITH COULD WATER: Widely apply for landscaping, outdoor cooling system, greenhouse, humidification, spraying disinfectant, epidemic prevention, deodorant air purification, small fountain, etc
- Operation Pressure: 20-70kg/cm; Flow Rate: 80-145ml/Min
- Minimal Water Use: 1/2 Gallon of water per hour per nozzle
- Leak-proof, self-sealing o-ring included with each nozzle, easy to install
- See more on Amazon...
Brand: RESNSTAR | Manufacturer: RESNSTAR
See On Amazon #12
10Pcs Brass Misting Nozzle - 0.004" Orifice (0.1mm) Dia 10/24 UNC Replacement Heads for Outdoor Cooling System (0.1mm)
Asin: B0CD63DD5F | Ean: 0707310187161 | UPC: 707310187161
Parameters: 0.004" (0.1Mm) Orifice Diameter, 3-70Kg Working Pressure, 10-30Ml/Min Flow Rate. This Misting Nozzle Does Not Have A Filtering Device. It Will Be Better If Filtering Device Can Be Installed At The Water Inlet Pipe. This Can Avoid Clogging..
Package Content : 10Pcs Brass Misting Nozzle.
Widely:It Is Widely Used In Outdoor Cooling Systems, Agricultural Irrigation Systems, Greenhouses, Landscaping, Small Fountains, Gardens, Patios, Sheds, Dust Removal, Lawn Spraying Systems, Artificial Fog And Other Humidification Places..
Install: Easily Screw Into Any 10/ 24 Unc Threaded Mist Nozzle Opening. Leak-Proof, Self-Sealing O-Ring Included With Each Nozzle; No Tape Or Sealant Is Required..
Features
- Material:Made of brass with stainless steel orifice, anti-rust and durable. The nozzle is more uniform and the working effect is better.
- Install: Easily screw into any 10/ 24 UNC threaded mist nozzle opening. Leak-proof, self-sealing o-ring included with each nozzle; no tape or sealant is required.
- Parameters: 0.004 (0.1mm) orifice diameter, 3-70kg working pressure, 10-30ml/min flow rate. This misting nozzle does not have a filtering device. It will be better if filtering device can be installed at the water inlet pipe. This can avoid clogging.
- Widely:It is widely used in outdoor cooling systems, agricultural irrigation systems, greenhouses, landscaping, small fountains, gardens, patios, sheds, dust removal, lawn spraying systems, artificial fog and other humidification places.
- Package Content : 10pcs Brass misting nozzle
- See more on Amazon...
Brand: ZXUEZHENG | Manufacturer: ZXUEZHENG
See On Amazon #13
Misting Nozzles for Outdoor Cooling System 10pcs Mister Nozzle Atomizing Misting Sprayer Fog Nozzles for Garden, Humidification, Landscaping, Dust Control, 0.024Inch (Size : 0.6mm)
Asin: B08H1KJ6YF | Ean: 0614405153676 | UPC: 614405153676
【Easy To Diy Install】 The Humidification Misting Cooling Nozzles Uses A No-Hole Design. Simplify The Insertion And Removal Of Small Fittings And Drippers. Cut The Hose To Desired Length, Then Connect All The Nozzles And Hose, And Finally Attach It To Your Faucet. No Special Tool Or Skill Required.
【Wide Application】Misting Cooling System Widely Apply For Garden, Trampoline Water Park, Landscaping, Greenhouse, Humidification, Outdoor Cooling System, Deodorant Air Purification, Swimming Pool Misting Fog Cooling, Increasing Air Humidity, Reducing Temperature And Reducing Floating Particles In The Air, Mist Mosquito System And So On.
【Energy Conservation & Environmental Protection】Misting Cooling System Directly Use Tap Water To Spray And Cool Down, No Electricity Consumption, No Energy Consumption, Save More Money For You, And Be An Environmentalist.
【Work Pressure】 5-20Kg/ 70-140Psi.
Features
- Lengthen Plug-in & Cleanable Mist Nozzles Sturdy metal plug-in mist nozzle easy to install and pull out and makes mist nozzle more firmly when spraying. The mist nozzle can be completely disassembled easy to clean the dirty when it is blocked by impurities
- Work Pressure 5-20kg/ 70-140PSI
- Easy to Diy Install The Humidification misting cooling Nozzles uses a no-hole design. Simplify the insertion and removal of small fittings and drippers. Cut the hose to desired length, then connect all the nozzles and hose, and finally attach it to your faucet. No special tool or skill required
- Energy Conservation & Environmental Protection Misting cooling system directly use tap water to spray and cool down, no electricity consumption, no energy consumption, save more money for you, and be an environmentalist
- Wide Application Misting Cooling System widely apply for garden, Trampoline water park, landscaping, greenhouse, humidification, outdoor cooling system, deodorant air purification, Swimming pool misting fog cooling, Increasing air humidity, reducing temperature and reducing floating particles in the air, Mist mosquito system and so on
- See more on Amazon...
Brand: RESNSTAR | Manufacturer: RESNSTAR
See On Amazon #14
HIRALIY 20 Pack Misting Nozzles with 4 Black Plug for Outdoor Cooling System
Asin: B0CR5F4N4L | Model: Misting Nozzles | PartNumber: Misting Nozzles
Versatile Applications: These Misting Nozzles Are Essential Accessories For Creating A Misting Cooling System, Fan Misting System, And Even A Plant Watering System..
Compatible With 1/4" Tubing: Designed To Fit Perfectly With 1/4 Inch Pe Pu Tubing, These Misting Nozzles Adhere To The Us Standard Size, Ensuring A Hassle-Free Setup..
Effortless Installation: It Only Takes 3 Seconds To Complete By Inserting A 1/4" Tube Into Both Ends Of The Nozzle..
Enhanced Cooling Effect: Experience A Refreshing Misting Range Of 20-40 Inches, Effectively Lowering The Surrounding Air Temperature By Up To 20 Degrees..
Features
- Premium Quality: The misting connector features sturdy recyclable plastic material, providing excellent sealing and leakproof performance.
- Enhanced Cooling Effect: Experience a refreshing misting range of 20-40 inches, effectively lowering the surrounding air temperature by up to 20 degrees.
- Versatile Applications: These misting nozzles are essential accessories for creating a misting cooling system, fan misting system, and even a plant watering system.
- Effortless Installation: It only takes 3 seconds to complete by inserting a 1/4 tube into both ends of the nozzle.
- Compatible with 1/4 Tubing: Designed to fit perfectly with 1/4 inch PE PU tubing, these misting nozzles adhere to the US standard size, ensuring a hassle-free setup.
- See more on Amazon...
Brand: HIRALIY | Manufacturer: HIRALIY
Dimensions: 1.37 x 4.80 x 3.70 inches
See On Amazon #15
Amazing-US 90 PCS Micro Sprayer Fan Jet Hydroponic Aeroponic Misters Cloners -30 PCS 90 Sprayer,30 PCS 180 Sprayer,30 PCS 360 Sprayer(90) Red
Asin: B082DXM6YS | Ean: 0795310007695 | UPC: 795310007695
Easily Screw Into 1/4" Id Tubing/Pipe Or Use 11/64 Drill Bit For Precise Hole.
Micro Sprayers Can Be Used To Replace Damaged Various Spray Head Straight Or For Diy Hydroponic/Aeroponic/Cloning Machine System.
10-32 Thread (M5-0.8 Metric) - Dimensions 13/16" X 1/2" (21Mm X 13Mm) 31.4 Gph Flow Rate (At 20 Psi).
Features
- Package total 90 pcs:30 PCS Micro Sprayers with 90 Degree Fan Jet Spray Pattern,30 PCS Micro Sprayers with 180 Degree Fan Jet Spray Pattern,30 PCS Micro Sprayers with 360 Degree Fan Jet Spray Pattern,
- 10-32 Thread (M5-0.8 Metric) - Dimensions 13/16 x 1/2 (21mm x 13mm) 31.4 GPH Flow Rate (at 20 PSI)
- Easily Screw into 1/4 ID Tubing/Pipe or use 11/64 Drill Bit for precise hole
- Micro sprayers Can be used to replace damaged various spray head straight or for DIY hydroponic/aeroponic/cloning machine system
- See more on Amazon...
Brand: SUCOHANS | Manufacturer: Amazing-us
See On Amazon #16
Fogg It Misting Watering Nozzle 1/4 GPM - Super SuperFine Volume
Asin: B07FNYNZZM
Brand: Fogg-It Nozzle | Manufacturer: Dramm
Weight: 0.01 Pounds
See On Amazon #17
Beduan Brass Misting Nozzles Low Pressure Atomizing Misting Sprayer for Outdoor Cooling System 0.012" Orifice (0.3 mm) 10/24 UNC Garden (Pack of 20)
Asin: B07XHGL5HV | Model: 1xy-10800-noz | PartNumber: 1xy-10800-noz | Ean: 0727161992882 | UPC: 727161992882
Screw Into Any 10/24-Threaded Mist Nozzle Opening.
Minimal Water Use Of 1.3 Gph Per Nozzle.
Operation Pressure:4-70Kg/Cm2 (60-995 Psi) Flow Rate:80-145Ml/Min (1.3-2.3Gpm).
High Quality: Made Of Brass,Never Rust. Best Choice For Outdoor Use With Cold Water.
Features
- 20Pcs Brass Misting Nozzles For Outdoor Cooling System, Greenhouse, Landscaping and Dust Control
- High Quality: Made of Brass,Never Rust. Best Choice For Outdoor Use With Cold Water
- Screw Into Any 10/24-Threaded Mist Nozzle Opening
- Operation Pressure:4-70kg/cm2 (60-995 psi) Flow Rate:80-145ml/Min (1.3-2.3GPM)
- Minimal Water Use Of 1.3 GPH Per Nozzle
- See more on Amazon...
Brand: beduan | Manufacturer: Beduan
See On Amazon #18
Hotop Brass Misting Nozzles 1/4 Inch Slip Lock Mister Nozzles Thread Misting Nozzle Tees with Plugs for Outdoor Cooling System Patio Misting System (15)
Asin: B08VWJHGHM
Simple Installment: You Can Directly Point The Hose And Insert It To The Bottom, Quickly Complete The Installation Without Extra Steps, And You Can Pull Out The Hose By Press The Blue Colored Circle, The Operation Is Very Convenient And Save Your Time.
Wide Range Of Use: Our Misting Nozzle Tees For 1/4 Inch Hoses Are The Necessary Accessories To Make Fan Misting System, Misting Cooling System, Plant Watering System, Helping You Cool Down The Hot Weather, Widely Suitable For Patios, Decks, Porches, Pool And Other Areas.
Effectively Misting Cooling: The Thread Misting Nozzle Can Quickly Connect With The 1/4 Inch Tubing By Sliding Lock, Effective Accessory Will Deliver A Fine Mist To Cool The Air In The Hot Weather And Cool The Surrounding Temperature To 20 Degrees.
Stable Material: These Mister Nozzles Are Made From Quality Brass And Plastic Material, Which Is Strong And Durable, Will Not Be Easily Deformed And Broken, Have Anti-Corrosion And Leak-Proof Functions, Can Serve You For A Long Time.
Features
- What you get: there are 15 pieces brass misting nozzle tees and 2 pieces plugs, suit for 1/4 inch tubing, and the sufficient quantity is enough for your daily use and replacement
- Stable material: these mister nozzles are made from quality brass and plastic material, which is strong and durable, will not be easily deformed and broken, have anti-corrosion and leak-proof functions, can serve you for a long time
- Simple installment: you can directly point the hose and insert it to the bottom, quickly complete the installation without extra steps, and you can pull out the hose by press the blue colored circle, the operation is very convenient and save your time
- Effectively misting cooling: the thread misting nozzle can quickly connect with the 1/4 inch tubing by sliding lock, effective accessory will deliver a fine mist to cool the air in the hot weather and cool the surrounding temperature to 20 degrees
- Wide range of use: our misting nozzle tees for 1/4 inch hoses are the necessary accessories to make fan misting system, misting cooling system, plant watering system, helping you cool down the hot weather, widely suitable for patios, decks, porches, pool and other areas
- See more on Amazon...
Brand: Hotop | Manufacturer: Hotop
See On Amazon #19
20 Pack Brass Mister Nozzles with 20 Pack Misting Nozzle Tees with 2 Pack End Plugs for Outdoor Cooling System Patio Misting System
Asin: B094VVG2ML | Model: Santongtoupenzui42 | PartNumber: Santongtoupenzui42
【Suit For 1/4'' Tubing】These Misting Nozzle Tees Are Made From Recyclable Plastic Material, Which Is Good Sealing, No Leak, Sleek And Sturdy, Can Serve You For A Long Time. Suitable For 1/4'' Tube, Slip Lock Quick Pushing..
【Wide Application】This Mist Nozzle Is The Necessary Accessories To Make Fan Misting System, Misting Cooling System, Plant Watering System, Helping You Cool Down The Hot Weather, Widely Suitable For Patios, Decks, Porches, Pool And Other Play Areas. It's Also Great For Flowers, Plants, Bonsai, And Potted Fruit..
【Effectively Misting Cooling】The Fantastic Outdoor Cooling System Cools The Surrounding Air Temperatures Up To 20 Degrees, Provides A Cool Temperature From The Heat For Your Favorite Outdoor Areas. Cooling And Humidifier Function Bring You A Cool Summer And A More Healthy Life..
【Upgrade High Quality】These Mister Nozzles Are Made From Brass Material, Anti-Rust And Mist Effectively. The Built-In Stainless Steel Wafer Through Advanced Forging Process, Strong Durability, Is 2.5 Times The Life Of A Similar Nozzle..
Features
- Package Include 20pcs brass misting nozzles, 20pcs misting nozzle tees, 2pcs end plugs. The sufficient quantity is enough for your daily use and replacement.
- Upgrade High Quality These mister nozzles are made from brass material, anti-rust and mist effectively. The built-in stainless steel wafer through advanced forging process, strong durability, is 2.5 times the life of a similar nozzle.
- Suit For 1/4'' Tubing These misting nozzle tees are made from recyclable plastic material, which is good sealing, no leak, sleek and sturdy, can serve you for a long time. Suitable for 1/4'' tube, slip lock quick pushing.
- Effectively Misting Cooling The fantastic outdoor cooling system cools the surrounding air temperatures up to 20 degrees, provides a cool temperature from the heat for your favorite outdoor areas. Cooling and humidifier function bring you a cool summer and a more healthy life.
- Wide Application This mist nozzle is the necessary accessories to make fan misting system, misting cooling system, plant watering system, helping you cool down the hot weather, widely suitable for patios, decks, porches, pool and other play areas. It's also great for flowers, plants, bonsai, and potted fruit.
- See more on Amazon...
Brand: Petutu | Manufacturer: Petutu
See On Amazon #20
RuoFeng Mister Nozzles Brass For Outdoor Cooling System Low-Pressure Atomizer 22 pcs Orifice 0.008" (0.2 mm) 10-24 UNC
Asin: B08FT9NVJF | Model: RF14201 | PartNumber: RF14201 | Ean: 8425511167721
It Is Used A Sturdy Brass Body With Stainless Steel Orifice,Use Of Precision Nozzle Keypunch, Sophisticated Production,Strong Durability.
Thread Size:10-24 Unc，Orifice：0.008" (0.2 Mm).
Operation Pressure:20-70Kg/Cm .Flow Rate:80-145L/Min (21-38Gpm).Minimal Water Use Of 1/2 Gph Per Nozzle.
This Misting Nozzle Does Not Need To Use Air Compressed, Can Use Liquid Pressure To Form A Very Fine Mist, Excellent Misting Effect, Energy And Water Saving, Low Cost, Good Effect, No Leakage.
Features
- 22 Pcs Brass Misting Nozzles For Outdoor Cooling System, Greenhouse, Landscaping and Dust Control.This type of nozzle is applied in the low pressure
- This misting nozzle does not need to use air compressed, can use liquid pressure to form a very fine mist, excellent misting effect, energy and water saving, low cost, good effect, no leakage
- It is used a sturdy brass body with stainless steel orifice,Use of precision nozzle keypunch, sophisticated production,strong durability
- Operation Pressure:20-70kg/Cm .Flow Rate:80-145l/Min (21-38GPM).Minimal Water Use Of 1/2 GPH Per Nozzle
- Thread size:10-24 UNC Orifice 0.008 (0.2 mm)
- See more on Amazon...
Brand: RuoFeng | Manufacturer: RuoFeng
See On Amazon
Looking For Something Else?
Search