Stm32 Max30102 Heart Rate Sensor Module Ultra-Low Power Puls Detection Heartbeat Blood Oxygen Concentration Test for
Asin: B0D3YJS2W7
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Brand: ANHHOME | Manufacturer: ANHHOME
See On Amazon Similar To Stm32 Max30102 Heart Rate Sensor
#1
HiLetgo 2pcs STM32F103C8T6 ARM STM32 Minimum System Development Board Module STM32F103C8T6 Core Learning Board for Arduino
Asin: B07VKSVM21 | Model: 3-01-1045-2pcs | PartNumber: 3-01-1045-2pcs
Use The Current Smart Phones Of Mirco Usb Interface, Easy To Use, Usb Communication And Power Supply Can Be Done..
Download With Swd Debug Interface, Which Requires A Minimum Of 3 Wires To Complete Debug A Download Task.
Equipped With High Quality 1*40/2.54Mm Spacing Of Single Rows Of Pins, Ensuring Excellent Conductivecontact.
Board Of Mcu-Based Basic Circuits, Such As A Crystal Oscillator Circuit, Usb Interface And Usb Power Management Circuits, And So On..
Features
- The Board lead to all the I/O resources.
- Board of MCU-based basic circuits, such as a crystal oscillator circuit, USB interface and USB power management circuits, and so on.
- Use the current smart phones of Mirco USB interface, easy to use, USB communication and power supply can be done.
- Equipped with high quality 1*40/2.54mm spacing of single rows of pins, ensuring excellent conductivecontact
- Download with SWD debug interface, which requires a minimum of 3 wires to complete debug a download task
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #2
Teyleten Robot STM32F103C8T6 Minimum System Development Board STM32 ARM Core Learning Board Module for Arduino (5PCS)
Asin: B08THXZ6XK | Model: ASTM32F103C8T6 | PartNumber: ASTM32F103C8T6 | Ean: 6438112821789
Features
- Before, we used original ST chips. Due to the change in cost, we used ST compatible chips, they are fully compatible with ST chips and greatly reduces the cost of the module,can spend the least money to buy the same goods.Change by--2022 May 10
- See more on Amazon...
Brand: Teyleten Robot | Manufacturer: Teyleten Robot
Dimensions: 0.39 x 2.08 x 0.89 Inches
See On Amazon #3
HiLetgo MAX30102 Low Power Heart Rate Click Sensor Breakout Board Module for Arduino Pulse Oximetry Solution SpO2 Replace MAX30100
Asin: B07QC67KMQ | Model: 3-01-1506 | PartNumber: 3-01-1506
2.Example C Source Code For Arduino And Mbed Platforms.
Features
- 1.Optical Heart-Rate Monitor and Pulse Oximetry Solution
- 2.Example C Source Code For Arduino And mbed Platforms
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #4
Heart Rate Sensor Module MAX30102 Pulse Detection Blood Oxygen Concentration Compatible for Arduino STM32 (Pack of 2)
Asin: B07ZQNC8XP | Model: FY2019102903 | PartNumber: FY2019102903 | Ean: 0795042374232 | UPC: 795042374232
Apply To Wearable Device For Heart Rate And Blood Oxygen Collection, Worn On Fingers, Ear Lobes, Wrists And Other Places..
If You Have Any Questions Or Want More Information, Please Let Us Know, We Will Be Happy To Help. Your Satisfaction Is Our Priority..
The Chip Can Also Turn Off The Module By Software, And The Standby Current Is Close To Zero, So That The Power Supply Can Always Be Maintained..
The Standard I2c Compatible Communication Interface Can Transmit The Collected Data To Arduino, Kl25z And Other Microcontrollers For Heart Rate And Blood Oxygen Calculation..
Features
- Integrates a red LED, a infrared LED, aphotodetector, an optical equipment and a low noise electronic circuit with environmental light suppression.
- The standard I2C compatible communication interface can transmit the collected data to Arduino, KL25Z and other microcontrollers for heart rate and blood oxygen calculation.
- Apply to wearable device for heart rate and blood oxygen collection, worn on fingers, ear lobes, wrists and other places.
- The chip can also turn off the module by software, and the standby current is close to zero, so that the power supply can always be maintained.
- If you have any questions or want more information, please let us know, we will be happy to help. Your satisfaction is our priority.
- See more on Amazon...
Brand: USonline911 | Manufacturer: Devsolution
See On Amazon #5
HiLetgo STM32F407VET6 STM32 Cortex-M4 MCU Core Board Development Board NRF2410 FMSG SD Card
Asin: B071KBZR58 | Model: 3-01-1436 | PartNumber: 3-01-1436
Onboard: Sd Card Slot.
Features: 2.54Mm Integer Multiples Spacing Pin.
Rtc Battery: Cr1220.
Data Storage: W25q16.
Features
- STM32F407VET6 chip main parameters
- Data storage: W25Q16
- Onboard: SD card slot
- RTC Battery: CR1220
- Features: 2.54mm integer multiples spacing pin
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #6
Diitao 4pcs Heart Rate Sensor Module MAX30102 Pulse Detection Blood Oxygen Concentration Calculation Modules Heart Rate Sensors Compatible for Arduino STM32
Asin: B0BBDWLP86 | Model: DT082205 | PartNumber: DT082205 | Ean: 0687117702838 | UPC: 687117702838
50V Built-In Led Power Supply---The Chip Can Turn Off The Module Through Software, And The Standby Current Is Close To Zero,Maintaining Power Supply..
Usage---Wearable Device For Heart Rate And Blood Oxygen Collection..
I2c-Compatible Communication Interface---The I2c-Compatible Communication Interface Can Transmit The Collected Data, And Is Compatible For Arduino,Kl25z For Heart Rate And Blood Oxygen Calculation..
Max30102 Integrated Module---An Integrated Heart Rate Sensor Module That Integrates Red Led, Infrared Led,Optical Device, Photoelectric Detector, And Low-Noise Electronic Circuits With Ambient Light Suppression..
Features
- Working voltage:1.8~3.3~5.5V;LED peak wavelength:660nm/880nm;Monitoring signal type:Optical reflection signal (PPG);Communication interface:I2C interface board;Dimension of the reserved assembly hole:0.02x0.33 inch.
- MAX30102 Integrated Module---An integrated heart rate sensor module that integrates red LED, infrared LED,optical device, photoelectric detector, and low-noise electronic circuits with ambient light suppression.
- 50v built-in LED power supply---The chip can turn off the module through software, and the standby current is close to zero,maintaining power supply.
- I2c-compatible communication interface---The I2C-compatible communication interface can transmit the collected data, and is compatible for Arduino,KL25Z for heart rate and blood oxygen calculation.
- Usage---Wearable device for heart rate and blood oxygen collection.
- See more on Amazon...
Brand: Diitao | Manufacturer: Diitao
See On Amazon #7
DWEII 1PCS STM32F411 Development Board V3.0 STM32F411CEU6 STM32F4 Learning Board 100MHz Clock 512kB Flash and 128kB RAM with 1 PCS ST-Link V2 (Random Color) Support for MicroPython/Programming
Asin: B09V7GCMRX | Ean: 0701715515376 | UPC: 701715515376
✹✹Support Micropython Programming, Provide Available Micropython Firmware, See The Link For Configuration Files, But Do Not Provide Technical Answers!.
✹✹Usb-C Interface Software Accessible (Otg).
✹✹32 I/O, Including 14 Analog Inputs;Usb-C Interface Software Accessible.
✹✹V3.0 Version Began To Use Lead-Free Process, The Pin Header Is Gold-Plated Pin Header, More Environmentally Friendly.
Features
- ST-Link V2 Emulator Downloader Programming Supporting the full range of STM32 SWD debugging interface; Supporting the full range of STM8 SWIM download debugging (common development environments such as IAR, STVD etc. are supported);Supporting for automatic firmware upgrades It supports both 5V and 3.3V power outputs, and all I/O output ports are protected
- V3.0 version began to use lead-free process, the pin header is gold-plated pin header, more environmentally friendly
- Support MicroPython programming, provide available MicroPython firmware, see the link for configuration files, but do not provide technical answers!
- 32 I/O, including 14 analog inputs;USB-C interface software accessible
- USB-C interface software accessible (OTG)
- See more on Amazon...
Brand: DWEII | Manufacturer: DWEII
See On Amazon #8
DORHEA 3Pcs STM32F401 Development Board V3.0 STM32F401CCU6 STM32F4 Learning Board 84Mhz Freq 64KB RAM 256KB ROM for Programming
Asin: B09MLHYF89 | Ean: 0701715505186 | UPC: 701715505186
Stm32f401ccu6 Support For Micropython Programming With Available Micropython Firmware; Support For Programming Development; Support C Language Programming Development.
Stm32f401ccu6 There Are 3 Buttons, Reset Key, Boot0 Key, User Key.
25Mhz High Speed Crystal Oscillator & 32.768Khz 6Pf Low Speed Crystal Oscillator.
Features
- STM32F401CCU6 84Mhz, 64KB RAM, 256KB ROM
- 25MHZ high speed crystal oscillator & 32.768khz 6PF low speed crystal oscillator
- STM32F401CCU6 support for MicroPython programming with available MicroPython firmware; Support for programming development; Support C language programming development
- STM32F401CCU6 there are 3 buttons, reset key, BOOT0 key, user key
- See more on Amazon...
Brand: DORHEA | Manufacturer: DORHEA
See On Amazon #9
[initeq] STM32 ARM STM32F103C8T6 Blue Pill Minimum System Development Board with ST-Link V2 USB Programmer (2-Pack + ST-Link V2)
Asin: B079B95L9Y | Model: STM32BPSL01 | PartNumber: STM32BPSL01 | Ean: 0810673030927 | UPC: 810673030927
20Kb Ram.
Microusb And St-Link Connectors.
32 Khz Rtc Real Time Clock Crystal.
64Kb Flash.
Features
- 32-Bit ARM Cortex M3 72MHz
- 64KB Flash
- 20KB RAM
- 32 kHz RTC Real Time Clock Crystal
- MicroUSB and ST-Link Connectors
- See more on Amazon...
Brand: initeq | Manufacturer: initeq
See On Amazon #10
Aideepen ST-Link V2 Programming Unit Emulator Downloader(Random Color)+2PCS 40pin STM32F103C6T6 ARM STM32 SWD Minimum System Board
Asin: B09H3988GP | Model: ZH11044 | PartNumber: ZH11044
2Pcs 40Pin Stm32f103c6t6 Minimum System Board: Micro Usb Connector , You Can Give The Board Power Supply And Usb Communication..
Warranty & Guarantee: 3 Month Extended Warranty And 24/7 Friendly Customer Service. Any Situations, Please Feel Free To Contact Us By Email, Especially When You Need Technical Support.
Increased The 5V Power Output, The Output I / O Ports Are Protected Afraid Of Operational Errors Caused By St-Link V2 Damage.
St-Link V2 Programmer: Support The Full Range Of Stm32 Swd Debugging Interface, A Simple 4-Wire Interface (Including Power), Fast, Stable; Interface Definition Housing Directly Marked.
Features
- upgrade low cost and high stability,It can replace the basic program of STM32F103C8T6 chip.(If your program flash is less than 32K, RAM is less than 10K, and Timer 4 and Serial 3 are not used, you can use it to replace)
- ST-Link V2 Programmer: Support the full range of STM32 SWD debugging interface, a simple 4-wire interface (including power), fast, stable; interface definition housing directly marked
- 2PCS 40pin STM32F103C6T6 Minimum System Board: Micro USB connector , you can give the board power supply and USB communication.
- Increased the 5V power output, the output I / O ports are protected afraid of operational errors caused by ST-LINK V2 damage
- Warranty & Guarantee: 3 month extended warranty and 24/7 friendly customer service. Any situations, please feel free to contact us by email, especially when you need technical support
- See more on Amazon...
Brand: Aideepen | Manufacturer: Aideepen
See On Amazon #11
2Pcs Heart Rate Sensor Module MAX30102 Blood Oxygen Sensor Pulse Detection
Asin: B094JC48HQ | Ean: 0701715460423 | UPC: 701715460423
Application: Max30102 Is Used In Wearable Equipment For Heart Rate And Blood Oxygen Acquisition And Detection. It Is Worn On Fingers, Earlobes And Wrists.The Standard I2c Compatible Communication Interface Can Transmit The Collected Data To Kl25z And Other Microcontrollers For Heart Rate And Blood Oxygen Calculation..
Package Included:2X Max30102 Heart Rate Sensor Module.
The Chip Can Also Turn Off The Module By Software, And The Standby Current Is Close To Zero, So That The Power Supply Can Always Be Maintained..
Led Peak Wavelength: 660Nm/880Nm; Led Power Supply Voltage: 3.3~5V; Detection Signal Type: Optical Reflection Signal (Ppg); Output Signal Interface: I2c Interface; Communication Interface Voltage: 1.8 ~3.3V~ 5V..
Features
- MAX30102 is an integrated module of heart rate monitor biosensor. It integrates a red LED with an infrared LED, a photoelectric detector, an optical device, and a low noise electronic circuit with ambient light suppression.
- LED peak wavelength: 660nm/880nm; LED power supply voltage: 3.3~5V; Detection Signal Type: Optical Reflection Signal (PPG); Output Signal Interface: I2C Interface; Communication Interface Voltage: 1.8 ~3.3V~ 5V.
- Application: MAX30102 is used in wearable equipment for heart rate and blood oxygen acquisition and detection. It is worn on fingers, earlobes and wrists.The standard I2C compatible communication interface can transmit the collected data to KL25Z and other microcontrollers for heart rate and blood oxygen calculation.
- The chip can also turn off the module by software, and the standby current is close to zero, so that the power supply can always be maintained.
- Package included:2x MAX30102 Heart Rate Sensor Module
- See more on Amazon...
Brand: Atnsinc | Manufacturer: Atnsinc
See On Amazon #12
STM32F3DISCOVERY ST STM32F303VCT6 STM32 F3 ARM Cortex-M4 MCU Discovery Evaluation Development Board kit Embedded ST-Link/V2 debugger @XYGStudy
Asin: B00CWWSE6G | Model: 6.10373E+11 | PartNumber: 6.10373E+11 | Ean: 0610373479183 | UPC: 610373479183
Based On The Stm32f303vct6, It Includes An St-Link/V2 Embedded Debug Tool, Accelerometer, Gyroscope And E-Compass St Mems, Usb Connection, Leds And Pushbuttons..
Stm32f303vct6 Microcontroller Featuring 256 Kb Flash, 48 Kb Ram In An Lqfp100 Package, On-Board St-Link/V2 With Selection Mode Switch To Use The Kit As A Standalone St-Link/V2 (With Swd Connector For Programming And Debugging).
The Stm32f3discovery Helps You To Discover The Stm32 F3 Series Cortex-M4 Mixed-Signals Features And To Develop Your Applications Easily. It Includes Everything Required For Beginners And Experienced Users To Get Started Quickly..
Features
- Part Number: STM32F3DISCOVERY
- The STM32F3DISCOVERY helps you to discover the STM32 F3 series Cortex-M4 mixed-signals features and to develop your applications easily. It includes everything required for beginners and experienced users to get started quickly.
- Based on the STM32F303VCT6, it includes an ST-LINK/V2 embedded debug tool, accelerometer, gyroscope and e-compass ST MEMs, USB connection, LEDs and pushbuttons.
- STM32F303VCT6 microcontroller featuring 256 KB Flash, 48 KB RAM in an LQFP100 package, On-board ST-LINK/V2 with selection mode switch to use the kit as a standalone ST-LINK/V2 (with SWD connector for programming and debugging)
- See more on Amazon...
Brand: XYG-ST | Manufacturer: XYG-ST
See On Amazon #13
AITRIP 3PCS Heart Rate Sensor Module MAX30102 Puls Detection Blood Oxygen Concentration for Arduino STM32 (3PCS Black MAX30102)
Asin: B08NFY97SC | Model: MAX30102 | PartNumber: MAX30102 | Ean: 0701715453937 | UPC: 701715453937
Max30102 Is An Integrated Module Of Heart Rate Monitor Biosensor. It Integrates A Red Led With An Infrared Led, A Photoelectric Detector, An Optical Device, And A Low Noise Electronic Circuit With Ambient Light Suppression;Max30102 Uses A 1.8V Power Supply And An Independent 5.0V Power Supply For Internal Led.
It Can Be Used To A Wearable Device For Heart Rate And Blood Oxygen Collection, Worn On Fingers, Ear Lobes, Wrists And Other Places..
The Standard I2c Compatible Communication Interface Can Transmit The Collected Data Compatible With Arduino, Kl25z And Other Microcontrollers For Heart Rate And Blood Oxygen Calculation..
Features
- 3pcs Heart-Rate Sensor Module , MAX30102 Blood Oxygen Sensor, Compatible with Arduino STM32
- The standard I2C compatible communication interface can transmit the collected data Compatible with Arduino, KL25Z and other microcontrollers for heart rate and blood oxygen calculation.
- MAX30102 is an integrated module of heart rate monitor biosensor. It integrates a red LED with an infrared LED, a photoelectric detector, an optical device, and a low noise electronic circuit with ambient light suppression;MAX30102 uses a 1.8V power supply and an independent 5.0V power supply for internal LED
- it can be used to a wearable device for heart rate and blood oxygen collection, worn on fingers, ear lobes, wrists and other places.
- See more on Amazon...
Brand: AITRIP | Manufacturer: AITRIP
See On Amazon #14
DAOKAI MAX30102 Heart Rate Sensor Module Pulse Detection Blood Oxygen Concentration Detection Board with Dupont Cable Compatible for Arduino for STM32,Pack of 4
Asin: B0CD73CPNJ | Model: JA-DA-016 | PartNumber: JA-DA-016
🎖️【Specification】: Output Signal Interface: I2c Interface;Communication Interface Voltage: 1.8 ~5V;Led Power Supply Voltage: 3.3~5V;Led Peak Wavelength: 660Nm/880Nm;Detection Signal Type: Optical Reflection Signal (Ppg);Size:21Mm*5Mm..
🎖️【Products Include】: 4 X Max30102 Heart Rate Sensor;8 X 8-Pin Header;30 X Male And Female Dupont Cable..
🎖️【Video Link】: For More Details, Please Refer To Link:Https://Www.Youtube.Com/Watch?V=Karbc2zkpby..
🎖️【Communication Interface】: The Standard I2c Compatible Communication Interface Can Transmit The Collected Data To For Arduino, Kl25z,And Other Microcontrollers For Heart Rate And Blood Oxygen Calculation..
Features
- WHAT IT DOES : MAX30102 is an integrated module of heart rate monitor biosensor. It integrates a red LED with an infrared LED, a photoelectric detector, an optical device, and a low noise electronic circuit with ambient light suppression.Apply to wearable device for heart rate and blood oxygen collection, worn on fingers, ear lobes, wrists and other places.
- COMMUNICATION INTERFACE : The standard I2C compatible communication interface can transmit the collected data to for Arduino, KL25Z,and other microcontrollers for heart rate and blood oxygen calculation.
- SPECIFICATION : Output Signal Interface: I2C Interface;Communication Interface Voltage: 1.8 ~5V;LED power supply voltage: 3.3~5V;LED peak wavelength: 660nm/880nm;Detection Signal Type: Optical Reflection Signal (PPG);Size:21mm*5mm.
- VIDEO LINK : For more details, please refer to link:https://www.youtube.com/watch?v=KarBC2ZKpBY.
- PRODUCTS INCLUDE : 4 x MAX30102 Heart Rate Sensor;8 x 8-pin header;30 x Male and female DuPont cable.
- See more on Amazon...
Brand: DAOKAI | Manufacturer: DAOKAI
See On Amazon #15
EC Buying 3Pcs STM32F401CCU6 STM32 Minimum Core System Learning Development Board Module STM32F4 STM32F401 ARM Cortex-M4 Type-C 256 Kbytes Flash Memory
Asin: B0CPJGHMPR
Up To 256 Kbytes Of Flash Memory.
Stm32f401 Development Board.
Frequency Up To 84 Mhz.
512 Bytes Of Otp Memory.
Features
- Frequency up to 84 MHz
- 512 bytes of OTP memory
- Up to 256 Kbytes of Flash memory
- Frequency up to 84 MHz
- STM32F401 development board
- See more on Amazon...
Brand: EC Buying | Manufacturer: EC Buying
See On Amazon #16
Teyleten Robot STM32F401CCU6 Development Board STM32F4 STM32F401 Learning Board Development Board for Arduino 3 pcs
Asin: B0CPF4Q8HR
Please Adjust The Direction Of The Jumper Cap If It Does Not Fit, Because The Jumper Cap Is Wide On One Side And Narrow On The Other..
No Jumper Cap Required, Can Be Used Directly. 10K Resistor Pull-Down Inside Booto.
Features
- 25MHZ High Speed Crystals and 32.768Khz 6PF Low Speed Crystals
- No jumper cap required, can be used directly. 10K resistor pull-down inside BOOTO
- Please adjust the direction of the jumper cap if it does not fit, because the jumper cap is wide on one side and narrow on the other.
- See more on Amazon...
Brand: Teyleten Robot | Manufacturer: Teyleten Robot
See On Amazon #17
HiLetgo STM32F103C8T6 ARM STM32 Minimum System Development Board Module STM32F103C8T6 Core Learning Board for Arduino
Asin: B01DLIJOAO | Model: 3-01-1045-A | PartNumber: 3-01-1045-A
Use The Current Smart Phones Of Mirco Usb Interface, Easy To Use, Usb Communication And Power Supply Can Be Done..
Download With Swd Debug Interface, Which Requires A Minimum Of 3 Wires To Complete Debug A Download Task.
Equipped With High Quality 1*40/2.54Mm Spacing Of Single Rows Of Pins, Ensuring Excellent Conductivecontact.
Board Of Mcu-Based Basic Circuits, Such As A Crystal Oscillator Circuit, Usb Interface And Usb Power Management Circuits, And So On..
Features
- The Board lead to all the I/O resources.
- Board of MCU-based basic circuits, such as a crystal oscillator circuit, USB interface and USB power management circuits, and so on.
- Use the current smart phones of Mirco USB interface, easy to use, USB communication and power supply can be done.
- Equipped with high quality 1*40/2.54mm spacing of single rows of pins, ensuring excellent conductivecontact
- Download with SWD debug interface, which requires a minimum of 3 wires to complete debug a download task
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #18
STM32F407VET6 Development Board,STM32F4 32Bit DC 1.8V-3.6V M4 Learning Board Single-Chip Learning Module
Asin: B08G8JW3LW | Model: 1 | PartNumber: 1 | Ean: 0779712318597 | UPC: 779712318597
Working Frequency:168Mhz,210Dmis/1.25Dmips/Mhz. Storage Resources:512Kb Flash,192+4Kb Sram.
Shop With Confidence: To Provide You With The Highest Quality Service, If You Have Any Question, Please Feel Free To Contact Us.We Will Provide After-Sales Service Until You Are Satisfied..
Operating Temperature:-20℃~85℃. Operating Humidity:5%~95%Rh.
Support 1.44 And 1.8 Inch Lcd Screen. Support Usb One-Key Download. Comes With Gpio Pins.
Features
- It Is A STM32F407VET6 Development Board.Users Can Download the Code Directly.Open All Pins, Users Can Choose to Use Various Interface Resources According to Their Own Needs.
- Support 1.44 and 1.8 Inch LCD Screen. Support USB One-key Download. Comes With GPIO Pins
- Working Frequency:168MHz,210DMIS/1.25DMIPS/MHz. Storage Resources:512kB Flash,192+4kB SRAM
- Operating Temperature:-20 ~85 . Operating Humidity:5%~95%RH
- SHOP WITH CONFIDENCE: To Provide You With the Highest Quality Service, If You Have Any Question, Please Feel Free to Contact Us.We Will Provide After-sales Service Until You Are Satisfied.
- See more on Amazon...
Brand: DONGKER | Manufacturer: DONGKER
Dimensions: 0.59 x 3.43 x 2.83 inches
See On Amazon #19
KOOBOOK 1Pcs MAX30102 Oximeter Heart Rate Beat Pulse Sensor Monitor Module Replace MAX30100 R6D3
Asin: B07S7NR5Y7 | Model: KB041 | PartNumber: KB041 | Ean: 0682559865820 | UPC: 682559865820
The Max30102 Operates On A Single 1.8V Power Supply,And A Separate 5.0V Power Supply For The Internal Leds..
The Module Can Be Shut Down Through Software With Zero Standby Current, Allowing The Power Rails To Remain Powered At All Times.For Mobile And Wearable Devices..
Communication Is Through A Standard I 2 C-Compatible Interface..
It Includes Internal Leds,Photodetectors, Optical Elements, And Low-Noise Electronics,With Ambient Light Rejection..
Features
- The MAX30102 is an integrated pulse oximetry and heart-rate monitor module.
- It includes internal LEDs,photodetectors, optical elements, and low-noise electronics,with ambient light rejection.
- The MAX30102 operates on a single 1.8V power supply,and a separate 5.0V power supply for the internal LEDs.
- Communication is through a standard I 2 C-compatible interface.
- The module can be shut down through software with zero standby current, allowing the power rails to remain powered at all times.For mobile and wearable devices.
- See more on Amazon...
Brand: KOOBOOK | Manufacturer: KOOBOOK
See On Amazon #20
5PCS STM32F103C8T6 STM32 Minimum System Development Board Module 40 Pin Core Learning Module for
Asin: B0B5X2NWW3
Mirco Usb Interface: Using The Mirco Usb Interface Of The Current Smartphone, Which Is Easy To Use And Can Perform Usb Communication And Power Supply..
Satisfy Different Needs: Including 5Pcs Minimum System Board Modules, Sufficient Quantity, Convenient For Various Diy Electrical Testing, Has Strong Practicability..
Swd Interface: The System Board Module Is Downloaded Using The Swd Debugging Interface, And The Interface Needs At Least 3 Wires To Complete The Debugging Of The Download Task..
Stable Performance: 40 Pin Stm32f103c8t6 Minimum System Board Module, With Fine Processing, Has Stable And Reliable Performance, Less Interference..
Features
- BASIC CIRCUIT DESIGN: Basic circuits based on microcontroller board, such as crystal oscillator circuit, USB interface and USB power management circuit, etc.
- STABLE PERFORMANCE: 40 Pin STM32F103C8T6 minimum system board module, with fine processing, has stable and reliable performance, less interference.
- MIRCO USB INTERFACE: Using the Mirco USB interface of the current smartphone, which is easy to use and can perform USB communication and power supply.
- SWD INTERFACE: The system board module is downloaded using the SWD debugging interface, and the interface needs at least 3 wires to complete the debugging of the download task.
- SATISFY DIFFERENT NEEDS: Including 5pcs minimum system board modules, sufficient quantity, convenient for various DIY electrical testing, has strong practicability.
- See more on Amazon...
Brand: FTVOGUE | Manufacturer: FTVOGUE
See On Amazon
Looking For Something Else?
Search