Best quadcopter camera mounts - Buying Guide
Last Updated: 04/25/2024
Share on
Bestselling quadcopter camera mounts on Amazon
- Hanatora 4.7-12.9 Inch Tablet Holder Mount for DJI Mavic Mini,Mini SE,Mavic 2 Pro/Zoom,Mavic Air,Spa...
- Arzroic Tablet Holder Mount for DJI Mini 2/Mini 2 SE/Air 2S/Air 3/Mavic 3/Mavic Air 2/Mini 3 4 Pro/R...
- Arzroic Tablet Holder Mount with Lanyard for DJI Mini 2/Mini 2 SE/Air 3/Air 2S/Mavic 3/Mavic Air 2/R...
- Hanatora 4-11 Inch Tablet Phone Front Holder Mount with Neck Lanyard for DJI Mavic Mini/Mini SE,Mavi...
- VCUTECH Drone RC Tablet Holder Compatible with DJI Mini 3 Pro, Mavic 3, Mavic 3 Classic, Mini 2, Mav...
- HeiyRC 0.31-0.47in 8-12mm Thickness Phone Holder for DJI Mavic Mini Se Mavic Pro 2 Zoom Air Spark Re...
- HeiyRC Silicone Eye Pad for DJI AVATA Goggles 2 Face Cushion Cover Sweat-Proof Non-Slip Washable Fac...
- Goggles 2 Battery Bracket Holder and Power Cable for DJI Avata Goggles 2, Battery Recharging Wire/Cl...
- HeiyRC Gimbal Bumper for DJI Avata,PTZ Protect Bar Aluminum Alloy Anti-Collision Camera Guard FPV Dr...
- Replacement for DJI Mini 4 Pro Gimbal Shock Absorption Rubber for DJI Mini 4 Pro Damper Rubber Gimba...
#1
Hanatora 4.7-12.9 Inch Tablet Holder Mount for DJI Mavic Mini,Mini SE,Mavic 2 Pro/Zoom,Mavic Air,Spark,Mavic Pro/Platinum Remote Controller, Aluminum Phone Accessories
Asin: B098JPS1VJ | Model: YX-M-AIR2-032 | PartNumber: YX-M-AIR2-032
【Highlights】The Problem Of Insufficient Tightening And Unstable Position Of Traditional Nuts Is Solved. All Adopt Joint Design, Which Is More Convenient, Fast And Stable To Use.
【What You Get】 1 X Tablet Holder.
【Sturdy And Stable】 The Holder Has Good Supporting Force And Can Support A Weight Within 1.4 B /640G. Hold The Controller Normally, The Tablet Can Maintain A Stable Position. You Can Use Accessories Such As Sunshade.
Product Weight: 9.7 Ounces /274.85G. The Base Is Aluminum Alloy. Arm And Clip Are High Quality Plastic.Foldable Design, Easy To Carry And Store.
【Precise Adjustment】 The Holder Has Two Joints,Which Can Adjust The Angle Of The Arm And The Clip Flexibly, Simply And Accurately.
【Wide Range Of Application】 Support Most 4.7"-12.9" Inches Tablet And Phone.Not Fit 4 Inch Phone Or Phones Less Than 124 Mm In Length.
Features
- Compatible With DJI Mavic Mini,DJI Mini SE,Mavic 2 Pro,Mavic 2 zoom,Mavic Air,Mavic Pro/ Platinum/,DJI Spark remote controller
- Wide range of application Support most 4.7-12.9 inches tablet and phone.Not fit 4 inch phone or phones less than 124 mm in length
- Highlights The problem of insufficient tightening and unstable position of traditional nuts is solved. All adopt joint design, which is more convenient, fast and stable to use
- Precise adjustment The holder has two joints,which can adjust the angle of the arm and the clip flexibly, simply and accurately
- Sturdy and stable The holder has good supporting force and can support a weight within 1.4 b /640g. Hold the controller normally, the tablet can maintain a stable position. You can use accessories such as sunshade
- Product weight: 9.7 ounces /274.85g. The base is aluminum alloy. Arm and clip are high quality plastic.Foldable design, easy to carry and store
- What You Get 1 x tablet holder
- See more on Amazon...
Brand: Hanatora | Manufacturer: Hanatora
Weight: 0.61 Pounds
See On Amazon #2
Arzroic Tablet Holder Mount for DJI Mini 2/Mini 2 SE/Air 2S/Air 3/Mavic 3/Mavic Air 2/Mini 3 4 Pro/RC-N1/RC-N2 Drone Accessories Remote Controller iPad Mount Holder
Asin: B09PF8Y632 | Model: MC-TH-G2S | PartNumber: MC-TH-G2S
Two Slots And Two Screws Ensure That The Ipad Holder Is Firmly Fixed To The Remote Control. Compact And Durable But Only Weight 1.75 Oz.
After-Sale Service: 1 Year Warranty. Any Questions Or Quality Issue Will Be Answered Or Solved Within 24 Hours.
The Tablet Holder Does Not Affect The Contraction Of The Original Built-In Phone Holder.
No Need To Assemble Or Disassemble Each Time, You Can Easily Put It Into Your Backpack Together With Your Remote Controller And You Can Also Quickly Start Your Flight.
Features
- The Upgraded Portable Tablet Holder is an essential accessory for DJI Mini 4 Pro, DJI Air 3, DJI Mini 3, DJI Mini 3 Pro, DJI Mini 2, DJI Mini 2 SE, DJI Air 2S, DJI Mavic 3, DJI Mavic 3 Cine/Classic and DJI Mavic Air 2 Remote Control - DJI RC N1 and DJI RC N2, it can hold all tablets that width between 4.33 and 7.20 inches
- No need to assemble or disassemble each time, you can easily put it into your backpack together with your remote controller and you can also quickly start your flight
- Two slots and two screws ensure that the ipad holder is firmly fixed to the remote control. Compact and durable but only weight 1.75 oz
- The tablet holder does not affect the contraction of the original built-in phone holder
- After-Sale Service: 1 year warranty. Any questions or quality issue will be answered or solved within 24 hours
- See more on Amazon...
Brand: Arzroic | Manufacturer: Arzroic
Dimensions: 0.68 x 5.94 x 2.80 inches | Weight: 0.11 Pounds
See On Amazon #3
Arzroic Tablet Holder Mount with Lanyard for DJI Mini 2/Mini 2 SE/Air 3/Air 2S/Mavic 3/Mavic Air 2/RC-N1/RC-N2 Drone Accessories Remote Controller iPad Mount Holder
Asin: B0BRD33PCN | Model: MC-TH-G5 | PartNumber: MC-TH-G5
Compact And Durable, 2 Slots And 2 Screws Ensure That The Ipad Holder Is Firmly Fixed To The Remote Control.
After-Sale Service: 1 Year Warranty. Any Questions Or Quality Issue Will Be Answered Or Solved Within 24 Hours.
Folding And Puting Away This Tablet Holder Does Not Affect The Contraction Of The Original Built-In Phone Holder.
Simple And Easy, No Need To Disassemble Each Time, Fold The Holder Then You Can Easily Put It Into Your Backpack Together With Your Remote Control.
Features
- The Upgraded Portable Tablet Holder and Skin-friendly Lanyard compatible with DJI Mini 2 SE, DJI Mini 2, DJI Air 3, DJI Air 2S, DJI Mavic 3 and DJI Mavic Air 2 Remote Control, can hold all tablets that width between 4.33 and 7.20 inches
- Simple and easy, no need to disassemble each time, fold the holder then you can easily put it into your backpack together with your remote control
- Compact and durable, 2 slots and 2 screws ensure that the ipad holder is firmly fixed to the remote control
- Folding and puting away this tablet holder does not affect the contraction of the original built-in phone holder
- After-Sale Service: 1 year warranty. Any questions or quality issue will be answered or solved within 24 hours
- See more on Amazon...
Brand: Arzroic | Manufacturer: Arzroic
Weight: 0.24 Pounds
See On Amazon #4
Hanatora 4-11 Inch Tablet Phone Front Holder Mount with Neck Lanyard for DJI Mavic Mini/Mini SE,Mavic 2 Pro/Zoom, DJI Mavic Air/Spark/Mavic Pro/Platinum Remote Control
Asin: B07J657ZCH | Model: MAVIC2-004 | PartNumber: MAVIC2-004 | Ean: 0653445655757 | UPC: 653445655757
Have Screen On The Top Part Of The Transmitter Instead Of The Bottom Will Never Obfuscate Or Block Your View Of The Information Shown On The Transmitter Display..
What You Get: 1 X Remote Controller Tablet Holder, 1 X Neck Lanyard Strap..
Suitable Tablet & Phone: 4-11 Inches Tablet Or Phone.Widely Compatible With Ipad Pro 9.7"/10.5"/11"(Not For 12.9"), Ipad Air 3/2/1(9.7"/10.5"), Ipad Mini 4/3/2(7.9"), Samsung Galaxy Tab S2/4/3/A, Nexus 9, Nivida Sheild K1 And Other Tablets Smaller Than 11 Inch.Some Tablets Or Phones Need To Make Some Adjustment From Horizontal To Vertical And Have A Rotation..
Features
- PREMIUM MATERIAL: The base and bracket are made of high quality nylon material(Nylon is a kind of plastic), high hardness with good toughness. This material has great tensile and compression strength.The clip is made of high quality ABS plastic.the Quick-release bracket mount is easy to install and uninstall with user-friendly thumb screws.
- SUITABLE TABLET & PHONE: 4-11 inches tablet or phone.Widely compatible with iPad Pro 9.7/10.5/11(Not for 12.9), iPad Air 3/2/1(9.7/10.5), iPad Mini 4/3/2(7.9), Samsung Galaxy Tab S2/4/3/A, Nexus 9, Nivida Sheild K1 and other tablets smaller than 11 inch.Some tablets or phones need to make some adjustment from horizontal to vertical and have a rotation.
- Have screen on the top part of the transmitter instead of the bottom will never obfuscate or block your view of the information shown on the transmitter display.
- WHAT YOU GET: 1 x Remote controller Tablet holder, 1 x Neck Lanyard Strap.
- See more on Amazon...
Brand: Hanatora | Manufacturer: Hanatora
Weight: 0.44 Pounds
See On Amazon #5
VCUTECH Drone RC Tablet Holder Compatible with DJI Mini 3 Pro, Mavic 3, Mavic 3 Classic, Mini 2, Mavic Air 2s, Air 2, for 4-12.9 inch iPad Tablet Mount, Drone Accessories(Upgraded Version)
Asin: B08QF4SJ1D | Model: V-THP-102 | PartNumber: V-THP-102 | Ean: 0850007916251 | UPC: 850007916251
Made Of Strong And Lightweight Material, 360-Degree Adjustable, Flexible Design Arbitrary Rotation With Lightweight Design. Just Snap On To Your Dji Mavic Mini3 / Mavic 3 Classic / Mavic Air 2S Remote Controller And It’S Good To Go.
What You Get: 1 X Rc Tablet Holder Pro. Our Worry-Free 12-Month Warranty, And Friendly Customer Service. Satisfaction Guarantee: We’Re Proud Of Our Products. If You Aren’T Satisfied, We’Ll Send Replacement For Any Reason Within A Year Of Purchase.
An Ergonomic Design Drone Accessories, Tested By Professional Drone Pilots, Hold Your Device In A Perfect Balance, Bring Your Dji Rc-N1 Remote Controller Suit With Ipad Air And Other Tablet. Vcutech Rc Tablet Stand Doesn't Comes With Additional Cable, Purchase Separately If Needed.
Support Up To A Maximum Of 12.9-Inch Width Phone & Tablet. Widely Compatible With, Ipad Air, Ipad Mini 5/4/3, Samsung Galaxy Tab S5e/S4/S6/A7, Nexus 9/7, And Most Other Tablets Between 4 -12.9 Inch, Ideal For Dji Mini 3 Pro Rc Controller.
Features
- Designed only for DJI Mini 3 / Mavic 3 / Mini 2 / Mavic Air 2 / DJI Air 2S remote controller. Weight: Only 5.8 OZ with a size: 6.5 x 2.6 x 3.7 inch with adjustable view angle make this VCUTECH tablet holder pro a must-have for DJI RC controller
- Support up to a maximum of 12.9-inch width phone & tablet. Widely compatible with, iPad Air, iPad Mini 5/4/3, Samsung Galaxy Tab S5e/S4/S6/A7, Nexus 9/7, and most other tablets between 4 -12.9 inch, ideal for DJI Mini 3 Pro RC Controller
- Made of strong and lightweight material, 360-degree adjustable, flexible design arbitrary rotation with lightweight design. Just snap on to your DJI Mavic Mini3 / Mavic 3 Classic / Mavic Air 2s remote controller and it s good to go
- An ergonomic design drone accessories, tested by professional drone pilots, hold your device in a perfect balance, bring your DJI RC-N1 Remote Controller suit with iPad Air and other Tablet. VCUTECH RC Tablet Stand doesn't comes with additional cable, purchase separately if needed
- What You Get: 1 x RC Tablet Holder Pro. Our worry-free 12-month warranty, and friendly customer service. Satisfaction Guarantee: We re proud of our products. If you aren t satisfied, we ll send replacement for any reason within a year of purchase
- See more on Amazon...
Brand: VCUTECH | Manufacturer: VCUTECH
Dimensions: 3.70 x 6.25 x 2.60 Inches | Weight: 0.35 Pounds
Warranty: VCUTECH 1 Year Warranty
See On Amazon #6
HeiyRC 0.31-0.47in 8-12mm Thickness Phone Holder for DJI Mavic Mini Se Mavic Pro 2 Zoom Air Spark Remote Control Phone Mount Clip Accessory
Asin: B08725X634 | Ean: 0077063265912 | UPC: 077063265912
Supports Mobile Phones With A Total Thickness Of 8-12Mm..
Please Measure The Thickness Of Your Phone And Case Before Place The Order..
Product Include:1 Set Phone Mount,4 Pieces Sponge Pad..
Compatible With Original Data Cable, Small Size, Easy To Carry,.
Features
- Designed for mobile phones with shells, used for DJI Mavic Pro 1 2/Mavic Mini/Se/Pro/Air Spark remote control drones,
- Compatible with original data cable, small size, easy to carry,
- Supports mobile phones with a total thickness of 8-12mm.
- Product include:1 set phone mount,4 pieces sponge pad.
- Please measure the thickness of your phone and case before place the order.
- See more on Amazon...
Brand: HeiyRC | Manufacturer: HeiyRC
Dimensions: 3.10 x 1.18 x 1.97 Inches
See On Amazon #7
HeiyRC Silicone Eye Pad for DJI AVATA Goggles 2 Face Cushion Cover Sweat-Proof Non-Slip Washable Face Padding Accessories(Black)
Asin: B0BMX9Y27L | Model: Black face padding | PartNumber: Black face padding | Ean: 0752692102189 | UPC: 752692102189
Easy To Clean - Wipeable, Washable, Reusable And Long Term Use..
Special Design - The Forehead Is Designed With A Non-Slip Stripe That Won't Slip Off, Protecting Your Shooting Journey..
Thin - Ultra-Thin Face Cover Only 0.078 Inches In Thickness,Light, Soft, And Comfortable,Which Perfectly Fits Most People Face..
Premium Material - Eye Pad Replacement Made Of High-Grade Environmentally Friendly Silicone,So The Faceplate Is Safe And Hygienic, And No Irritation To The Skin. Bring You An Improved And More Comfortable Experience..
Features
- COMPATIBILITY - Specially designed for DJI Avata Goggles 2.Skin-friendly, sweatproof, thin, comfortable, easy to install remove, and clean.Not only increases the experience of flight but also provides better protection for your DJI Goggles 2 device.
- PREMIUM MATERIAL - Eye pad replacement made of high-grade environmentally friendly silicone,so the Faceplate is safe and hygienic, and no irritation to the skin. Bring you an improved and more comfortable experience.
- EASY TO CLEAN - Wipeable, washable, reusable and long term use.
- THIN - Ultra-thin face cover only 0.078 inches in thickness,light, soft, and comfortable,which perfectly fits most people face.
- SPECIAL DESIGN - The forehead is designed with a non-slip stripe that won't slip off, protecting your shooting journey.
- See more on Amazon...
Brand: HeiyRC | Manufacturer: HeiyRC
Dimensions: 3.74 x 7.08 x 1.57 inches
See On Amazon #8
Goggles 2 Battery Bracket Holder and Power Cable for DJI Avata Goggles 2, Battery Recharging Wire/Clip for Avata Goggles 2, Protective Cover for DJI Avata Combo Goggles 2 Lens Protector Accessories
Asin: B0BGJH6T6X
Protective Mat For Dji Avata Goggles 2 Lens- This Is A Muti-Function Mat, Lightproof&Dustproof&Scratchproof Foam Cover For Avata Goggles 2 Lens, Hold And Store The Power Cable, This Light-Proof Cover Will Provide Effective Protection On The Display Glass Because The Lens Is Every Sensitive To Sunlight, Keep Your Goggles 2 In Good Condition..
Get Them(Option-2)- Package Only Includes 1* Bracket, 1* 30Cm Power Line And 1*Lens Mat, The Device Is Not Included, Get It, Very Impressed!.
Usage And Material- Easy To Assemble And Disassemble, Battery Clip Is Made Of Pc Material, Power Wire Is Made Of Pvc Material, Lightweight And Durable..
Application- Battery Bracket For Avata Goggles Battery Can Perfectly Hold Your Goggles 2 Battery And Hang The Battery On The Back Of The Headset Strap. Short Power Wire Will Connect Your Goggles 2 With Battery To Supply The Power, No More Dangling Cords To Catch On Anything, Prevents Drag And Drops, Increase Your Flying&Playing Time. Good Solution To Get More Comfortable Experience, Both Will Be Perfect Replacement Of Dji Avata Googles 2 Original Long Cable..
Features
- Battery Bracket and short Power Cable for DJI Avata Goggles 2- The Battery Holder for DJI Avata Goggles 2 Battery, Power Cable is only 30cm and it is the replacement of original cable or spare line(Note: charging cord is not for FPV Goggles V2, please choose right option).
- Application- Battery Bracket for Avata Goggles battery can perfectly hold your Goggles 2 battery and hang the battery on the back of the headset strap. Short power wire will connect your goggles 2 with battery to supply the power, no more dangling cords to catch on anything, prevents drag and drops, increase your flying&playing time. Good solution to get more comfortable experience, both will be perfect replacement of DJI Avata googles 2 original long cable.
- Protective Mat for DJI Avata Goggles 2 Lens- this is a muti-function mat, lightproof&dustproof&scratchproof foam cover for Avata Goggles 2 Lens, hold and store the power cable, this light-proof cover will provide effective protection on the display glass because the lens is every sensitive to sunlight, keep your Goggles 2 in good condition.
- Usage and Material- easy to assemble and disassemble, Battery clip is made of PC material, power wire is made of PVC material, lightweight and durable.
- Get Them(Option-2)- Package only includes 1* bracket, 1* 30cm Power line and 1*Lens Mat, the device is not included, get it, Very Impressed!
- See more on Amazon...
Brand: JCHPINE | Manufacturer: JCHPINE
See On Amazon #9
HeiyRC Gimbal Bumper for DJI Avata,PTZ Protect Bar Aluminum Alloy Anti-Collision Camera Guard FPV Drone Accessories(Black)
Asin: B0C1SHDTH2 | Model: CSG148_1 | PartNumber: CSG148_1 | Ean: 0793288459706 | UPC: 793288459706
Quick Release - Easy And Quick Installation, Only Remove One Screw From Each Side Of The Body And It Is Ready To Go. The Installation Screws Is Designed According To The Shape Of The Drone, Which Is Firm And Reliable, With Self-Contained Toolkit, No Additional Tools Are Needed..
Note - When The Lens Is Facing Down, The Avata Protection Bumper Will Enter The Lens Slightly, Which Will Not Affect The Use. If You Are Not Satisfied With Our Product For Any Reason, You Can Contact Us 100% To Your Satisfaction..
Material & Durability - Made Of Light-Weight Aluminum Alloy, The Weight Is Only 12G (0.42Oz), Almost No Effect On The Flight, The Surface Is Treated With Oxidation, Not Easy To Fade And Rust, High Visibility Color Makes Your Avata Drone More Eye-Catching In The Air..
Design & Safety - With Its Unique Curved Design, It Can Withstand Great Impact When The Avata Fpv Drone Crashes, Effectively Protecting The Lens And Gimbal, Without Interfering With The Camera And Sensors, Reducing Drag..
Features
- Compatibility - This gimbal bumper designed specifically for DJI Avata FPV drone, provides cushioning and protection for your expensive Avata gimbal.
- Design & Safety - With its unique curved design, it can withstand great impact when the Avata FPV drone crashes, effectively protecting the lens and gimbal, without interfering with the camera and sensors, reducing drag.
- Quick Release - Easy and quick installation, only remove one screw from each side of the body and it is ready to go. The installation screws is designed according to the shape of the drone, which is firm and reliable, with self-contained toolkit, no additional tools are needed.
- Material & Durability - Made of light-weight aluminum alloy, the weight is only 12g (0.42oz), almost no effect on the flight, the surface is treated with oxidation, not easy to fade and rust, high visibility color makes your Avata drone more eye-catching in the air.
- Note - When the lens is facing down, the avata protection bumper will enter the lens slightly, which will not affect the use. If you are not satisfied with our product for any reason, you can contact us 100% to your satisfaction.
- See more on Amazon...
First Available: 04/30/2023
Brand: HeiyRC | Manufacturer: HeiyRC
Dimensions: 1.40 x 3.80 x 2.20 inches | Weight: 0.03 Pounds
See On Amazon #10
Replacement for DJI Mini 4 Pro Gimbal Shock Absorption Rubber for DJI Mini 4 Pro Damper Rubber Gimbal Camera Shock Absorber Drones Accessories Parts with Repair Tools(Left and Right Rubber)
Asin: B0CX84S2HP
Quality Guarantee: The Gimbal Shock Absorption Rubber For Dji Mini 4 Pro Are Make Of Good Silicone, Can Be Stretched At Will And Not Easily Broken, Produce By Accurate Design With The Original Module.With Good Shock Absorbing Cushioning , This Mini 4 Pro Shock Absorbing Cushion Helps To Improve The Overall Stability And Performance, Make Sure More Smooth And Professional Aerial Photography..
Suggestion Tips: Please Recognize The Difference Of Gimbal Shock Pads Before Installation, The Left Side Is 3 Holes, The Right Side Is 4 Holes. If You Do Not Have Any Experience Of Install Mini 4 Pro Gimbal Shock Absorption Rubber, Please Find The Professionals To Install, If You Need The Suggested Installation Video For Dji Mini 4 Pro Damper Rubber, Please Leave Message..
Professional Repair Tools: Comes With Set Tools For Dji Mini 4 Pro Gimbal Damper Rubber Replacement, It Include The Screwdriver Of ”+” , Anti-Static Tweezers And Spudger, Help To Disassemble And Install More Convenient And Easily..
Rubber Application：When Your Drone Shooting Was Show The Problem Of Shaking, The Photo Is Not Clear. Which Means The Gimbal Damper Rubber Was Damaged And Need To Replace. Our Mini 4 Pro Gimbal Shock Absorption Rubber Replacement Could Help To Solve The Problem..
Features
- Compatible Model: The gimbal shock absorption rubber replacement only for DJI Mini 4 Pro( Long Type), not suits for other drone model. Please confirm the Mini 4 Pro damper rubber is the correct model.
- Rubber Application When your drone shooting was show the problem of shaking, the photo is not clear. Which means the gimbal damper rubber was damaged and need to replace. Our Mini 4 Pro gimbal shock absorption rubber replacement could help to solve the problem.
- Quality Guarantee: The gimbal shock absorption rubber for DJI Mini 4 Pro are make of good silicone, can be stretched at will and not easily broken, produce by accurate design with the original module.With good shock absorbing cushioning , this Mini 4 Pro shock absorbing cushion helps to improve the overall stability and performance, make sure more smooth and professional aerial photography.
- Professional Repair Tools: Comes with set tools for DJI Mini 4 Pro gimbal damper rubber replacement, it include the screwdriver of + , anti-static tweezers and spudger, help to disassemble and install more convenient and easily.
- Suggestion Tips: Please recognize the difference of gimbal shock pads before installation, the left side is 3 holes, the right side is 4 holes. If you do not have any experience of install Mini 4 Pro gimbal shock absorption rubber, please find the professionals to install, if you need the suggested installation video for DJI Mini 4 Pro damper rubber, please leave message.
- See more on Amazon...
Brand: HBIHGHHONG | Manufacturer: shenzhenshiyuelaohudianzishangwuyouxiangongsi
Warranty: 6 months
See On Amazon #11
ZWLLKJGS 5Pcs Rubber Damper Shock Absorbers Balls Damping Cushion Repair Kits for DJI Mavic 3/Mavic 3 Pro/Air 3 Drone Spare Parts Gimbal Camera Accessories
Asin: B0CRBJPRQZ
High Quality.If Your Drone Shooting Shows The Problem Of Shaking,The Photo Is Not Clear, Which Means The Gimbal Shock Absorption Rubber Was Damaged And Need To Replace.Our Gimbal Shock Absorber Ball Is Made Of High Quality Silicone And Not Easily Broken,It Could Help You Solve The Problem..
Package:5×Gimbal Shock Absorption Rubber Replacement Parts.
Professional Installation Required,You Can Go To A Repair Department With The Gimbal Shock Ball You Bought Or Find Some Videos Online About How To Replace..
Used To Connecting The Shock Absorber Bracket Mounting Plate And The Gimbal Camera,Reduce Vibrations Between The Drone And Cameras,Inscrease Stability And More Clear Image..
Features
- Original brand new gimbal rubber shock absorbing ball replacement parts,suitable for Dji Air 3/Mavic 3/Mavic 3 pro drone.
- Used to connecting the shock absorber bracket mounting plate and the gimbal camera,reduce vibrations between the drone and cameras,inscrease stability and more clear image.
- High quality.If your drone shooting shows the problem of shaking,the photo is not clear, which means the gimbal shock absorption rubber was damaged and need to replace.our gimbal shock absorber ball is made of high quality silicone and not easily broken,it could help you solve the problem.
- Professional installation required,you can go to a repair department with the gimbal shock ball you bought or find some videos online about how to replace.
- Package:5 gimbal shock absorption rubber replacement parts
- See more on Amazon...
Brand: ZWLLKJGS | Manufacturer: ZWLLKJGS
Dimensions: 0.16 x 0.31 x 0.20 inches
See On Amazon #12
Battery Clip Holder for DJI Avata Goggles 2, with 30cm Charging Cable
Asin: B0BG7CJ3V5
The Back Of The Battery Holder Adopts Smooth Flat Design, Not Oppress The Back Of The Head After Wearing, And There Is No Discomfort..
Using An Upgraded Copper Core, The Output Is More Stable And The Charging Is Faster. Pvc Wire, Sturdy And Durable..
The 30Cm Charging Cable Does Not Affect Your Flight Control And Brings You A Better Flight Experience..
The Battery Bracket Adoptes Barb Design, And The Charging Hole Is Reserved, Can Be Charged Anytime And Anywhere..
Features
- The battery clip and charging cable is for DJI Avata Goggles 2 flight glasses.
- The battery bracket adoptes barb design, and the charging hole is reserved, can be charged anytime and anywhere.
- The back of the battery holder adopts smooth flat design, not oppress the back of the head after wearing, and there is no discomfort.
- The 30cm charging cable does not affect your flight control and brings you a better flight experience.
- Using an upgraded copper core, the output is more stable and the charging is faster. PVC wire, sturdy and durable.
- See more on Amazon...
Brand: JOYSOG | Manufacturer: JOYSOG
See On Amazon #13
Mini Pan/Tilt Camera Platform Anti-Vibration Camera Mount w/ 2 Servos Aircraft FPV
Asin: B0775R6JFF | Model: 43218-273 | PartNumber: 43218-273 | Ean: 0766330281501 | UPC: 766330281501
Anti-Vibration Camera Mount For Aircraft Fpv..
About Us, Professional Factory, Welcome To Our Store For More Choices With Best Price. What We Pursue Is Your Satisfaction Of Our Service, Not Just For Our Goods. For Any Reason You Are Unsatisfied With Our Product At Any Time, Simply Contact Support For Exchange Or Refund. We Will Reply You About Any Question You Ask Within 24 Hours..
They're Good For Beginners Who Want To Make Stuff Move And The Pan-Tilt Is An Easy Way To Give Whatever You're Making Both Left-Right And Up-Down Motion..
Camera Is Not Included..
Features
- This is a small Camera Platform. Including 2 SG90 servos.
- Camera is not included.
- Anti-Vibration Camera Mount for Aircraft FPV.
- They're good for beginners who want to make stuff move and the pan-tilt is an easy way to give whatever you're making both left-right and up-down motion.
- About us, Professional factory, welcome to our store for more choices with best price. What we pursue is your satisfaction of our service, not just for our goods. For any reason you are unsatisfied with our product at any time, simply contact support for exchange or refund. We will reply you about any question you ask within 24 hours.
- See more on Amazon...
Brand: Ximimark | Manufacturer: Ximimark
Weight: 0.11 Pounds
See On Amazon #14
DJI Mavic Mini Gimbal Camera Assembly Repair Parts for DJI Mavic Mini Genuine Spare Replacement
Asin: B09Z2NYZ61 | Ean: 0768432241483 | UPC: 768432241483
Professional Installation Required, Drone Can Be Easily Damaged By Improper Installation, So Please Be Very Careful When You Replace It..
Half-Year Quality Assurance, If There Is Any Problem, Please Contact Us.
Dji Mavic Mini Camera Lens Are Available For Maintenance And Installation. But There Will Be Reported Errors When Installing, Which Can Not Affect Normal Use. The Hardware Function Is Normal, And , The Errors Can Be Eliminated By Software . In Order To Avoid Trouble , Non Maintenance Personnel Should Not Buy ..
Can Be Used To Repair/Replace A Damaged Mavic Mini Drone Camera.
Features
- This camera needs to be calibrated with professional software after you installed. Please search on the youtube, or we suggest you could go to professional repairing departments to do the calibration. Please make sure you can do the calibration before placing order.
- Can be used to repair/replace a damaged Mavic Mini drone camera
- Professional installation Required, drone can be easily damaged by improper installation, so please be very careful when you replace it.
- DJI mavic mini camera lens are available for maintenance and installation. But there will be reported errors when installing, which can not affect normal use. The hardware function is normal, And , the errors can be eliminated by software . In order to avoid trouble , non maintenance personnel should not buy .
- Half-year quality assurance, if there is any problem, please contact us
- See more on Amazon...
Brand: IMYHOO | Manufacturer: IMYHOO
See On Amazon #15
HeiyRC Gimbal Bumper for DJI Avata,PTZ Protect Bar Aluminum Alloy Anti-Collision Camera Guard FPV Drone Accessories(Red)
Asin: B0C1SH72LD | Ean: 0715748609285 | UPC: 715748609285
Quick Release - Easy And Quick Installation, Only Remove One Screw From Each Side Of The Body And It Is Ready To Go. The Installation Screws Is Designed According To The Shape Of The Drone, Which Is Firm And Reliable, With Self-Contained Toolkit, No Additional Tools Are Needed..
Note - When The Lens Is Facing Down, The Avata Protection Bumper Will Enter The Lens Slightly, Which Will Not Affect The Use. If You Are Not Satisfied With Our Product For Any Reason, You Can Contact Us 100% To Your Satisfaction..
Material & Durability - Made Of Light-Weight Aluminum Alloy, The Weight Is Only 12G (0.42Oz), Almost No Effect On The Flight, The Surface Is Treated With Oxidation, Not Easy To Fade And Rust, High Visibility Color Makes Your Avata Drone More Eye-Catching In The Air..
Design & Safety - With Its Unique Curved Design, It Can Withstand Great Impact When The Avata Fpv Drone Crashes, Effectively Protecting The Lens And Gimbal, Without Interfering With The Camera And Sensors, Reducing Drag..
Features
- Compatibility - This gimbal bumper designed specifically for DJI Avata FPV drone, provides cushioning and protection for your expensive Avata gimbal.
- Design & Safety - With its unique curved design, it can withstand great impact when the Avata FPV drone crashes, effectively protecting the lens and gimbal, without interfering with the camera and sensors, reducing drag.
- Quick Release - Easy and quick installation, only remove one screw from each side of the body and it is ready to go. The installation screws is designed according to the shape of the drone, which is firm and reliable, with self-contained toolkit, no additional tools are needed.
- Material & Durability - Made of light-weight aluminum alloy, the weight is only 12g (0.42oz), almost no effect on the flight, the surface is treated with oxidation, not easy to fade and rust, high visibility color makes your Avata drone more eye-catching in the air.
- Note - When the lens is facing down, the avata protection bumper will enter the lens slightly, which will not affect the use. If you are not satisfied with our product for any reason, you can contact us 100% to your satisfaction.
- See more on Amazon...
First Available: 04/30/2023
Brand: HeiyRC | Manufacturer: HeiyRC
Dimensions: 1.40 x 3.80 x 2.20 Inches | Weight: 0.03 Pounds
See On Amazon #16
FPV Goggles V2 Battery Bracket Holder and Power Cable Compatible with DJI FPV Combo Goggles V2, Battery Recharging Wire/Clip for FPV Goggles V2 Accessories
Asin: B096W7G3N8 | Ean: 0727387998859 | UPC: 727387998859
Ultra Portable And Enjoyment- Power Cable Replacement Is Very Short(Only 30Cm), No More Dangling Cords To Catch On Anything, Prevents Drag And Drops. Good Solution To Get More Comfortable Experience..
Get Them(Optiona-1)- Package Only Includes 1* Bracket And 1* 30Cm Power Line, The Device Is Not Included, Get It, Very Impressed!.
Usage And Material- Easy To Assemble And Disassemble, Battery Clip Is Made Of Pc Material, Power Wire Is Made Of Pvc Material, Lightweight And Durable..
Application- Battery Bracket Can Perfectly Hold Your Battery And Hang The Battery On The Back Of The Headset Strap. Short Power Wire Will Connect Your Goggles V2 With Battery To Supply The Power. Good Solution To Increase Your Flying&Playing Time..
Features
- Battery Bracket&30cm Power Cable- The Battery Holder is compatible with DJI FPV Goggles V2, Power Cable is only 30cm and it is the replacement of original cable or spare line(Note: charging cord is not for Avata Goggles 2, please choose right option).
- Application- Battery Bracket can perfectly hold your battery and hang the battery on the back of the headset strap. Short power wire will connect your goggles V2 with battery to supply the power. Good solution to increase your flying&playing time.
- Ultra Portable and Enjoyment- Power Cable replacement is very short(only 30cm), no more dangling cords to catch on anything, prevents drag and drops. Good solution to get more comfortable experience.
- Usage and Material- easy to assemble and disassemble, Battery clip is made of PC material, power wire is made of PVC material, lightweight and durable.
- Get Them(Optiona-1)- Package only includes 1* bracket and 1* 30cm Power line, the device is not included, get it, Very Impressed!
- See more on Amazon...
Brand: JCHPINE | Manufacturer: JCHPINE
See On Amazon #17
Hanatora 4.7-12.9 Inch Tablet Holder Mount Bracket for DJI FPV Remote Controller 2,Extended Drone Control Clip Accessories
Asin: B098J2FVTJ
【Wide Range Of Application】 Support Most 4.7"-12.9" Inches Tablet And Phone.Not Fit 4 Inch Phone Or Phones Less Than 124 Mm In Length.
【What You Get】 1 X Tablet Holder, 1 X Usb-C Cable,1 X Ios Cable,1 X Micro-Usb Cable.
【Precise Adjustment】 The Holder Has Two Joints,Which Can Adjust The Angle Of The Arm And The Clip Flexibly, Simply And Accurately.
【Sturdy And Stable】 The Holder Has Good Supporting Force And Can Support A Weight Within 1.4 B /640G. Hold The Controller Normally, The Tablet Can Maintain A Stable Position. You Can Use Accessories Such As Sunshade.
【Quick And Easy Installation And Removal】Fasten Or Loosen The Buckle.
Connection: Install Dji Fly App, Use The Included Data Cable To Connect The Tablet And Fpv Glasses. Turn On The Switch Of The Fpv Glasses To Display The Image.
Features
- Specially design for DJI FPV Remote Controller 2
- Connection: Install DJI Fly APP, use the included data cable to connect the tablet and FPV glasses. Turn on the switch of the FPV glasses to display the image
- Wide range of application Support most 4.7-12.9 inches tablet and phone.Not fit 4 inch phone or phones less than 124 mm in length
- Quick and easy installation and removal Fasten or loosen the buckle
- Precise adjustment The holder has two joints,which can adjust the angle of the arm and the clip flexibly, simply and accurately
- Sturdy and stable The holder has good supporting force and can support a weight within 1.4 b /640g. Hold the controller normally, the tablet can maintain a stable position. You can use accessories such as sunshade
- What You Get 1 x tablet holder, 1 x USB-C cable,1 x IOS cable,1 x Micro-USB cable
- See more on Amazon...
Brand: Hanatora | Manufacturer: YX-D-FPV-07
See On Amazon #18
RCGEEK Tablet Clip Mount Holder Extender Kit Compatible with Air 3 / Mini 3 Pro/Mini 2 / Mavic 3 / Air 2 / Air 2S Drone Controllers Removeable Extended Stand Accessory
Asin: B088NWT5V6 | Ean: 0740646020894 | UPC: 740646020894
Extended The Mavic 3 / Air 2 / Air 2S / Mavic Mini 2 Controller Clip Mount To 13.2 Cm (5.1Inch), Compatible With Ipad Mini And Other Tablet Which Width Less Than 13Cm(5.1 Inch)..
Note: Not Included Mavic 3 Air 2 2S Or Mavic Mini 2 Controller And Tablet Or Other Accessories;.
High Quality Plastic,Beautiful Appearance, Lightweight, Small Size, Easy To Carry;Removable, Easy To Install And Disassemble,No Need Any Tools;.
Your Mavic 3 / Air 2 2S / Mini 2 Remote Controllers Will Not Only Support To Work With Your Cellphone, But Also Easy To Work With Your Tablet Or Ipad.
Features
- Specialed design,only compatible with Air 3 / Mavic 3 / Mini 3 Pro / Mini 2 / Air 2 / Air 2S drone controllers;
- Your Mavic 3 / Air 2 2S / Mini 2 remote controllers will not only support to work with your cellphone, but also easy to work with your tablet or iPad
- Extended the Mavic 3 / Air 2 / Air 2S / Mavic Mini 2 controller clip mount to 13.2 cm (5.1inch), Compatible with iPad Mini and other tablet which width less than 13cm(5.1 inch).
- High quality plastic,beautiful appearance, lightweight, small size, easy to carry;Removable, easy to install and disassemble,no need any tools;
- Note: Not included Mavic 3 Air 2 2S or Mavic Mini 2 controller and tablet or other accessories;
- See more on Amazon...
Brand: RCGEEK | Manufacturer: RCGEEK
See On Amazon #19
ZWLLKJGS Replacement Shock Absorber Board Gimbal Vibration Absorption Damping Brackets for DJI Mavic 3 Pro Assembly Repair Part Drone Accessories
Asin: B0CRDCTBV9
Professional Installation Required,You Can Go To A Repair Department With The Gimbal Shock-Absorping Board You Bought Or Find Some Videos Online..
Package: 1×Mavic 3 Pro Gimbal Damping Bracket.
Used To Replace Damaged Or Broken Gimbal Camera Assembly Shock Absorbing Board..
Features
- Original brand new gimbal shock board accessories replacement part, suitable for Dji mavic 3 pro drone.
- Used to replace damaged or broken gimbal camera assembly shock absorbing board.
- Professional installation required,you can go to a repair department with the gimbal shock-absorping board you bought or find some videos online.
- Package: 1 mavic 3 pro gimbal damping bracket
- See more on Amazon...
Brand: ZWLLKJGS | Manufacturer: ZWLLKJGS
Dimensions: 1.57 x 3.94 x 2.17 inches
See On Amazon #20
HeiyRC Silicone Eye Pad for DJI AVATA Goggles 2 Face Cushion Cover Sweat-Proof Non-Slip Washable Face Padding Accessories(Red)
Asin: B0BMXC98ZY | Model: Red face padding | PartNumber: Red face padding | Ean: 0743645950087 | UPC: 743645950087
Easy To Clean - Wipeable, Washable, Reusable And Long Term Use..
Special Design - The Forehead Is Designed With A Non-Slip Stripe That Won't Slip Off, Protecting Your Shooting Journey..
Thin - Ultra-Thin Face Cover Only 0.078 Inches In Thickness,Light, Soft, And Comfortable,Which Perfectly Fits Most People Face..
Premium Material - Eye Pad Replacement Made Of High-Grade Environmentally Friendly Silicone,So The Faceplate Is Safe And Hygienic, And No Irritation To The Skin. Bring You An Improved And More Comfortable Experience..
Features
- COMPATIBILITY - Specially designed for DJI Avata Goggles 2.Skin-friendly, sweatproof, thin, comfortable, easy to install remove, and clean.Not only increases the experience of flight but also provides better protection for your DJI Goggles 2 device.
- PREMIUM MATERIAL - Eye pad replacement made of high-grade environmentally friendly silicone,so the Faceplate is safe and hygienic, and no irritation to the skin. Bring you an improved and more comfortable experience.
- EASY TO CLEAN - Wipeable, washable, reusable and long term use.
- THIN - Ultra-thin face cover only 0.078 inches in thickness,light, soft, and comfortable,which perfectly fits most people face.
- SPECIAL DESIGN - The forehead is designed with a non-slip stripe that won't slip off, protecting your shooting journey.
- See more on Amazon...
Brand: HeiyRC | Manufacturer: HeiyRC
Dimensions: 3.74 x 7.08 x 1.57 inches
See On Amazon #21
Protect Cover for DJI FPV Goggles V2 Dustproof Sunshade Pad Antenna microSD Card Storage Holder for DJI FPV Combo Accessories
Asin: B092YLJQL4 | Model: FV-Q9307 | PartNumber: FV-Q9307 | Ean: 0732866937656 | UPC: 732866937656
Durable Pu Material For Longer Service Life..
Package Included: 1Pc Protect Storage Cover (As The Second Photo Shows, The Goggles V2 & Antennas & Microsd Card Are Not Included).
Convenient And Easy To Carry Anywhere..
Storage Cover For Dji Fpv Googles V2 Antenna And Memory Card,It Can Holder Microsd Card And 4 Antennas..
Features
- The back flannel mateial protects the lens from sunlight, dust and scratch.
- Storage cover for DJI FPV Googles V2 antenna and memory card,it can holder microSD Card and 4 Antennas.
- Durable PU material for longer service life.
- Convenient and easy to carry anywhere.
- Package included: 1pc Protect Storage Cover (as the second photo shows, the Goggles V2 & antennas & microSD Card are not included)
- See more on Amazon...
Brand: gouduoduo2018 | Manufacturer: gouduoduo2018
Weight: 0.03 Pounds
See On Amazon #22
Landing Gear for DJI Avata 2, Adjustable Legs Height Extension Stand Quick Release Bracket for Avata 2 Drone Protection (Orange)
Asin: B0D2NRDWB4
The Spider Leg Structure Kickstand Provides A Stable Sense Of Security For Takeoff And Landing For Avata 2. (Adjust The Landing Gear To The Height Of 25Mm, The Avata 2 Can Autonomously Complete Turtle Flipping.).
Soft Silicone Strap For Quick Installation In Only One Step Without Scratching The Drone Body. Foldable Design, Portable Storage, Easy To Travel!.
Precise Molding, Customized, Firmly Lock The Fuselage For Stable Installation, And Does Not Affect The Visual System And Infrared Sensors At The Bottom Of The Body..
3 Adjustable Heights (41Mm, 35Mm, 25Mm). Greatly Increase The Spacing Between The Avata 2 And The Ground, Effectively Preventing Ground Debris From Damaging Or Dirtying The Fuselage, Sensors, Etc. During Takeoff And Landing..
Features
- This landing gear for Avata 2 can effectively raise the legs height!
- 3 adjustable heights (41mm, 35mm, 25mm). Greatly increase the spacing between the Avata 2 and the ground, effectively preventing ground debris from damaging or dirtying the fuselage, sensors, etc. during takeoff and landing.
- The spider leg structure kickstand provides a stable sense of security for takeoff and landing for avata 2. (Adjust the landing gear to the height of 25mm, the Avata 2 can autonomously complete turtle flipping.)
- Precise molding, customized, firmly lock the fuselage for stable installation, and does not affect the visual system and infrared sensors at the bottom of the body.
- Soft silicone strap for quick installation in only one step without scratching the drone body. Foldable design, portable storage, easy to travel!
- See more on Amazon...
Brand: Hesupy | Manufacturer: Hesupy
See On Amazon #23
JOYSOG Magnetic Camera Mount for DJI Action 4 / Action 3 Sports Camera Quick Release Adapter Extension Bracket Accessories
Asin: B0D2L6RG5G | Model: Action 4 / Action 3 | PartNumber: Action 4 / Action 3
Quickly Connect Your Camera On To Tripod / Super Clamp Directly For Multi-Angle Shooting..
The Silicone Pad Reduced The Friction Between The Camera And The Base While Reducing Slight Vibrations..
That Securely Fastens To The Camera, Ensuring Stability And Safety Even In Intense Sports Situations..
Strong Magnetic Attraction, Quick Assembly, A Strong Magnet Is Built Into The Base, Which Exactly Matches The Magnet Position Of The Host..
Features
- Packing list: 1 x Action Camera Quick-Release Adapter Mount for DJI Action 4 / Action 3 Action Camera.
- Strong magnetic attraction, quick assembly, a strong magnet is built into the base, which exactly matches the magnet position of the host.
- Quickly connect your camera on to tripod / super clamp directly for multi-angle shooting.
- that securely fastens to the camera, ensuring stability and safety even in intense sports situations.
- The silicone pad Reduced the friction between the camera and the base while reducing slight vibrations.
- See more on Amazon...
Brand: JOYSOG | Manufacturer: JOYSOG
See On Amazon #24
Hesupy Motor Protective Cover Cap for DJI Avata 2, Aluminum Alloy Motor Protection Case, Dust-Proof Waterproof Motor Protector for Avata 2 Drone (Black)
Asin: B0D2K9CFR7
Ultra-Light Aviation Aluminum Alloy, Cnc Finishing. Ultra-Light, Hardly Affect The Range..
One Time Installation, Long-Term Use. Does Not Affect The Disassembly And Installation Of The Propeller, Eliminating The Need To Repeatedly Disassemble The Motor Cover, Always Protect The Motor!.
Aluminum Alloy Has Good Thermal Conductivity, Which Will Not Affect The Motor Heat Dissipation In Flight..
Splash-Proof, Waterproof, Dust-Proof And Bump-Proof, Prolonging The Service Life Of The Motor..
Features
- Specially designed motor cover cap for DJI Avata 2.
- Splash-proof, Waterproof, dust-proof and bump-proof, prolonging the service life of the motor.
- Ultra-light aviation aluminum alloy, CNC finishing. Ultra-light, hardly affect the range.
- Aluminum alloy has good thermal conductivity, which will not affect the motor heat dissipation in flight.
- One time installation, long-term use. Does not affect the disassembly and installation of the propeller, eliminating the need to repeatedly disassemble the motor cover, always protect the motor!
- See more on Amazon...
Brand: Hesupy | Manufacturer: Hesupy
See On Amazon #25
Hesupy Motor Protective Cover Cap for DJI Avata 2, Aluminum Alloy Motor Protection Case, Dust-Proof Waterproof Motor Protector for Avata 2 Drone (Red)
Asin: B0D2K97PP3
Ultra-Light Aviation Aluminum Alloy, Cnc Finishing. Ultra-Light, Hardly Affect The Range..
One Time Installation, Long-Term Use. Does Not Affect The Disassembly And Installation Of The Propeller, Eliminating The Need To Repeatedly Disassemble The Motor Cover, Always Protect The Motor!.
Aluminum Alloy Has Good Thermal Conductivity, Which Will Not Affect The Motor Heat Dissipation In Flight..
Splash-Proof, Waterproof, Dust-Proof And Bump-Proof, Prolonging The Service Life Of The Motor..
Features
- Specially designed motor cover cap for DJI Avata 2.
- Splash-proof, Waterproof, dust-proof and bump-proof, prolonging the service life of the motor.
- Ultra-light aviation aluminum alloy, CNC finishing. Ultra-light, hardly affect the range.
- Aluminum alloy has good thermal conductivity, which will not affect the motor heat dissipation in flight.
- One time installation, long-term use. Does not affect the disassembly and installation of the propeller, eliminating the need to repeatedly disassemble the motor cover, always protect the motor!
- See more on Amazon...
Brand: Hesupy | Manufacturer: Hesupy
See On Amazon #26
Drone Bumper Protector, Lightweight RC Drone Protection Bar Prevent Collisions Made of Aluminum Alloy for Drone Accessories (Red)
Asin: B0D2JLGBNF | Model: Generic4av63cwm18-12 | PartNumber: Generic4av63cwm18-12
Top Extension Protection: Drone Protection Bar Has Top Extension Protection, When The Drone Is Upside Down On The Ground, To A Certain Extent To Guard The Top Parts Of The Drone..
Unique Design: Drone Protection Bar Adopts A Unique Bow Design To Increase The Crash Resistance Of The Bumper And Guard The Lens And Tripod Head Of The Drone More Effectively In The Event Of A Crash..
Expanded Design: Drone Bumper Protector With External Expansion Design, The Front End Of The Bumper Over The Front Part Of The Camera, The Of Aerial Images Less Impact, Does Not Affect The Tripod Head Cover Installation..
Easy To Install: You Only Need To Remove One Screw On The Left And Right Side Of The Drone Protection Bar To Install, The Installation Holes Are Designed According To The Shape Of The Drone, Sturdy And Reliable..
Features
- Lightweight Aluminum Alloy: Drone camera bumper protector is made of lightweight aluminum alloy with one piece molding, light weight, almost no effect on , the is oxidized, not easy to fade, no rust.
- Easy to Install: You only need to remove one screw on the left and right side of the drone protection bar to install, the installation holes are designed according to the shape of the drone, sturdy and reliable.
- Top Extension Protection: Drone protection bar has top extension protection, when the drone is upside down on the ground, to a certain extent to guard the top parts of the drone.
- Expanded Design: Drone bumper protector with external expansion design, the front end of the bumper over the front part of the camera, the of aerial images less impact, does not affect the tripod head cover installation.
- Unique Design: Drone protection bar adopts a unique bow design to increase the crash resistance of the bumper and guard the lens and tripod head of the drone more effectively in the event of a crash.
- See more on Amazon...
Brand: Generic | Manufacturer: Generic
Dimensions: 1.57 x 3.54 x 2.36 inches
See On Amazon #27
Drone Bumper Protector, Lightweight RC Drone Protection Bar Prevent Collisions Made of Aluminum Alloy for Drone Accessories (Black)
Asin: B0D2JM1VZH | Model: Generic4av63cwm18-11 | PartNumber: Generic4av63cwm18-11
Top Extension Protection: Drone Protection Bar Has Top Extension Protection, When The Drone Is Upside Down On The Ground, To A Certain Extent To Guard The Top Parts Of The Drone..
Unique Design: Drone Protection Bar Adopts A Unique Bow Design To Increase The Crash Resistance Of The Bumper And Guard The Lens And Tripod Head Of The Drone More Effectively In The Event Of A Crash..
Expanded Design: Drone Bumper Protector With External Expansion Design, The Front End Of The Bumper Over The Front Part Of The Camera, The Of Aerial Images Less Impact, Does Not Affect The Tripod Head Cover Installation..
Easy To Install: You Only Need To Remove One Screw On The Left And Right Side Of The Drone Protection Bar To Install, The Installation Holes Are Designed According To The Shape Of The Drone, Sturdy And Reliable..
Features
- Lightweight Aluminum Alloy: Drone camera bumper protector is made of lightweight aluminum alloy with one piece molding, light weight, almost no effect on , the is oxidized, not easy to fade, no rust.
- Easy to Install: You only need to remove one screw on the left and right side of the drone protection bar to install, the installation holes are designed according to the shape of the drone, sturdy and reliable.
- Top Extension Protection: Drone protection bar has top extension protection, when the drone is upside down on the ground, to a certain extent to guard the top parts of the drone.
- Expanded Design: Drone bumper protector with external expansion design, the front end of the bumper over the front part of the camera, the of aerial images less impact, does not affect the tripod head cover installation.
- Unique Design: Drone protection bar adopts a unique bow design to increase the crash resistance of the bumper and guard the lens and tripod head of the drone more effectively in the event of a crash.
- See more on Amazon...
Brand: Generic | Manufacturer: Generic
Dimensions: 1.57 x 3.54 x 2.36 inches
See On Amazon #28
Arnarkok Metal Desk Stand for DJI Mini 3 Drone Remote Control Mount DJI Mini 3 Pro Accessories Phone Tablet Stand
Asin: B0CW9SZNGF | Ean: 0191170473227 | UPC: 191170473227
Advanced Aviation Material Aluminum Alloy, Sturdy And Durable. All Positions In Contact With The Mini 3 Pro Body And Remote Control Are Equipped With Rubber Pads, Which Will Not Cause Damage..
Can Be Used As A Desktop Stand For Mobile Phones And Tablets.
1/4 Inch Screw Hole, Can Be Connected To Tripods And Other Devices For Use, And There Is A Hole Space For Hanging Straps!.
Bind The Remote Control And Mini Pro3 Together, You Can Use It As A Dslr Camera, Fast And Convenient.
Features
- Fix this metal bracket onto the remote control through the positioning screw hole, and then fix the mini 3 Pro onto this bracket, that is, bind the remote control and mini 3 Pro together for a beautiful and neat storage effect!
- Bind the remote control and mini Pro3 together, you can use it as a DSLR camera, fast and convenient
- Advanced aviation material aluminum alloy, sturdy and durable. All positions in contact with the mini 3 Pro body and remote control are equipped with rubber pads, which will not cause damage.
- 1/4 inch screw hole, can be connected to tripods and other devices for use, and there is a hole space for hanging straps!
- Can be used as a desktop stand for mobile phones and tablets
- See more on Amazon...
Brand: ARNARKOK | Manufacturer: Guanglian
Dimensions: 1.18 x 4.33 x 2.56 inches
Warranty: life time
See On Amazon #29
OSALADI Drone Stand Camera Expansion Mount Drone Camera Extension Bracket Action Camera Holder Fishing Line Release Drop Version Payload Thrower Kit Plastic Stabilizer Sports Camera Mini2
Asin: B0CV9G5B35 | Model: 58O01042A376B7QL | PartNumber: 58O01042A376B7QL
Air Dropper Device: Made Of , Sturdy And Durable, Wear-Resistant;.
Sports Camera: Easy To Install Camera Mount, Easy To Put On And Take Off..
Sport Accessories: The Sensors And Battery On The Uav Will Not Be Affected..
Action Camera: With Rubber Nonslip Pad To Prevent The Camera From Moving During Flight..
Features
- Clip payload drop: quick release, you can install and remove it from your drone easily.
- Action camera: with rubber nonslip pad to prevent the camera from moving during flight.
- Air dropper device: made of , sturdy and durable, wear-resistant;
- Sport accessories: the sensors and battery on the uav will not be affected.
- Sports camera: easy to install camera mount, easy to put on and take off.
- See more on Amazon...
Brand: OSALADI | Manufacturer: OSALADI
Dimensions: 0.39 x 1.34 x 0.87 inches | Weight: 0.03 Pounds
See On Amazon #30
Mounting Parts searchlight Suitable for DJI Mini 4 Pro/for Insta360 ACE PRO/for Action4 Sports Camera Holder Multi Purpose Expansion Mount (Mounts)
Asin: B0CTGZDW3K | Ean: 0762418103918 | UPC: 762418103918
🔔The Interior Is Padded To Prevent Scratches On The Body..
🔔Integrated Molding, Locking Machine, Stable Installation. Integrated With The Body, It Will Not Obstruct The Drone's Fill Light, Vision System, And Sensing System..
Features
- Multi purpose expansion mounting components can be used to install devices such as Action 4/3/2, 360 GO 3/2/1, Sunnylife upgraded searchlight and flashing light.
- Integrated molding, locking machine, stable installation. Integrated with the body, it will not obstruct the drone's fill light, vision system, and sensing system.
- The interior is padded to prevent scratches on the body.
- See more on Amazon...
Manufacturer: Honeye
See On Amazon
Looking For Something Else?
Search