Best servos & parts - Buying Guide
Last Updated: 04/19/2024
Share on
Bestselling servos & parts on Amazon
- Smraza 10 Pcs SG90 9G Micro Servo Metal Geared Motor Kit for RC Robot Arm/Hand/Control with Cable, M...
- INJORA RC Digital Servo 14kg Low Profile Servo Metal Digital Core High Torque Servo Motor for 1/10 1...
- 40 Sets Servo Plug Male Female Connector Crimp Pin Cable Kit Compatible JST SYP Futaba for Hitec Spe...
- Sg90 9g Micro Servo Motor, Miuzei Mini Servos Motor Kit Metal Gear 180 Degree Servo for Rc Car Airpl...
- LewanSoul 20KG RC Servo High Torque Servo Motors, Waterproof Full Metal Gear Steering Servo for 1/6 ...
- INJORA Coreless High Torque Micro Servo with Mount and Servo Horn for SCX24 C10 JLU Bronco Axial 1/2...
- OGRC RC Digital Servo Tester/ESC Consistency Tester for RC Helicopter Airplane Car(Servo Tester,ESC ...
- INJORA RC Servo Steering Servo with Servo Mount Bracket and Arm for AX24 RC Car Boat Model Parts Axi...
- Miuzei 2Pcs 25KG High Torque RC Servo, Waterproof Servo Motor Compatible with 1/8, 1/10 RC Car, Full...
- BETU 70kg Brushless Servo, Waterpoof Servo, High Torque Servo Compatible with 1/5 1/6, 1/8, 1/10 RC ...
#1
Smraza 10 Pcs SG90 9G Micro Servo Metal Geared Motor Kit for RC Robot Arm/Hand/Control with Cable, Mini Servos for Arduino Project (10)
Asin: B07L2SF3R4
Stall Torque (4.8V): 17.5Oz /In (1Kg/Cm). Dead Band Setting: 5 Ms.
Please Note: The Starting Current Of The Motor Should Be Greater Than 1A. Comes With 1 Year Warranty And Lifetime Technical Support.
Amplifier Type: Analog Controller. Operating Voltage: 4.8V～6.0V.
Interface Type: Compatible With Jr & Futaba Interface. Running Speed (At No Load): 0.09 ± 0.01 Sec/60°(4.8V ) 0.08 ± 0.01 Sec/60°(6V). Running Angle: 180 Degree.
Features
- SG90 9G micro servo motor for remote control helicopters, micro robot, robot arm and boats. Fit for ALL kinds of R/C Toys and also make electronics DIY compatible with Arduino, Raspberry Pi
- Interface Type: Compatible with JR & FUTABA interface. Running Speed (at no load): 0.09 0.01 sec/60 (4.8V ) 0.08 0.01 sec/60 (6V). Running angle: 180 degree
- Stall Torque (4.8V): 17.5oz /in (1kg/cm). Dead band setting: 5 ms
- Amplifier Type: Analog controller. Operating Voltage: 4.8V 6.0V
- Please Note: The starting current of the motor should be greater than 1A. Comes with 1 year warranty and lifetime technical Support
- See more on Amazon...
Brand: Smraza | Manufacturer: Smraza
Dimensions: 0.10 x 0.98 x 1.60 inches | Weight: 0.35 pounds
See On Amazon #2
INJORA RC Digital Servo 14kg Low Profile Servo Metal Digital Core High Torque Servo Motor for 1/10 1/12 RC Vehicles On-Road Touring Drift Car Helicopter Model
Asin: B09CDCC3ZX | Model: INJS014 | PartNumber: INJS014
【High Torque Fast Speed】The Digital Servo Provides An Impressive 11.2Kg Torque And 0.10" Transfer Speed At 4.8V, When You Increase The Voltage To 6.0V, The Specification Increases To 14Kg And 0.08" Transfer Speed!.
【Wide Applicability】Exquisite Upgrade Parts Is Not Only Suit For On-Road Car, Fixed-Wing Airplane , But Perfect For Rc Robots, Touring Drift Car, Rc Helicopter Model And So On. Note: This Servo Cann't Be Used As Dig/Shift Servo For Rc Crawler Car..
【High Performance】 Stable High Performance Digital Standard Servo, High Precision And Low Noise, A Great Replacement For The Old Or Damaged Rc Part..
【Low Profile Case】Low Profile Case Shape Saves Space And Weight. The Full Aluminum Case Design Not Only Looks Good But Also Allows For Cooler And Smoother Operating Temps..
Features
- Premium Quality Made of high quality material, full metal gears and dual ball bearings, high sensitivity, stable and low-noise.
- Low profile Case Low profile case shape saves space and weight. The full aluminum case design not only looks good but also allows for cooler and smoother operating temps.
- High Torque Fast Speed The digital servo provides an impressive 11.2kg torque and 0.10 transfer speed at 4.8V, when you increase the voltage to 6.0V, the specification increases to 14KG and 0.08 transfer speed!
- High performance Stable high performance digital standard servo, high precision and low noise, a great replacement for the old or damaged RC part.
- Wide Applicability Exquisite upgrade parts is not only suit for on-road car, Fixed-Wing airplane , but perfect for RC Robots, Touring Drift Car, RC Helicopter Model and so on. NOTE: This servo cann't be used as dig/shift servo for RC Crawler Car.
- See more on Amazon...
Brand: INJORA | Manufacturer: INJORA
See On Amazon #3
40 Sets Servo Plug Male Female Connector Crimp Pin Cable Kit Compatible JST SYP Futaba for Hitec Spektrum RC
Asin: B09MYWTHDZ | Model: CWK-SYF254-FM01 | PartNumber: CWK-SYF254-FM01 | Ean: 0033985744119 | UPC: 033985744119
The Cable Is 3 Meters Long 3P Wires, And 22Awg. The Conduct Is Made Of Multi-Core Tined Copper, Which Is Strong And Can Endure Enough Current.
The Servo Connector Is 2.54Mm Pin Spacing And The Red Connector Is 2.5Mm Pin Spacing.
Each Set Includes Connector Housing, Protective Connector Housing And Crimp Pin Connector..
The Black Connector Compatible With Futaba And Jr Connectors. Ideal For Servo Extensions Diy, Repairing Servo Connectors. The Red Connector Compatible With Jst Syp Connectors. Ideal For Power Cable..
Features
- Includes 20 sets servo male, 20 sets female connector, 20 sets red male SYP 20, sets female SYP connector, 3 meters long 22AWG cables, and a tweezers in one box. Easy to store
- The black connector compatible with Futaba and JR connectors. Ideal for servo extensions DIY, repairing servo connectors. The red connector compatible with JST SYP connectors. Ideal for power cable.
- The cable is 3 meters long 3P wires, and 22AWG. The conduct is made of multi-core tined copper, which is strong and can endure enough current
- Each set includes connector housing, protective connector housing and crimp pin connector.
- The servo connector is 2.54mm pin spacing and the red connector is 2.5mm pin spacing
- See more on Amazon...
Brand: elechawk | Manufacturer: YUYING
Dimensions: 0.79 x 7.09 x 3.94 Inches | Weight: 0.35 pounds
See On Amazon #4
Sg90 9g Micro Servo Motor, Miuzei Mini Servos Motor Kit Metal Gear 180 Degree Servo for Rc Car Airplane Plane Arduino 10 Pack
Asin: B072V529YD | Model: servo motors | PartNumber: servo motors | Ean: 0602430670893 | UPC: 602430670893
Micro Servo Motor - Stall Torque (4.8V): 17.5Oz /In (1Kg/Cm). Dead Band Width: 7Usec. Operating Voltage: 4.8V～6.0V..
Note - Starting Current Of The Analog Servo Motor Should Be Over 1A And Servo Sg90 Are Analog Servos Need To Continuously Provide A Pmw Signal, Then It Will Be Work Normally..
Application Fields -Servos Used For Fixed-Wing, Helicopter, Kt, Glider, Small Robot, Robotic Arm And Other Models..
Mini Servo - Small Servo Motor Compatible With Jr & Futaba Interface. Micro Servo Running Speed (At No Load) : 0.09±0.01 Sec/60° (4.8V) 0.08 ± 0.01 Sec/60°(6V). Running Angle: 180 Degree..
Features
- SG90 9G Servo - Miuzei 9g servo motor for remote control helicopters, micro robot, robot arm and boats. Fit for ALL kinds of R/C Toys and also make electronics DIY compatible with Arduino, Raspberry Pi.
- Mini Servo - small servo motor compatible with JR & Futaba interface. Micro servo running speed (at no load) : 0.09 0.01 sec/60 (4.8V) 0.08 0.01 sec/60 (6V). Running angle: 180 degree.
- Micro Servo Motor - Stall Torque (4.8V): 17.5oz /in (1kg/cm). Dead band width: 7usec. Operating Voltage: 4.8V 6.0V.
- Application Fields -Servos used for fixed-wing, helicopter, KT, glider, small robot, robotic arm and other models.
- Note - Starting current of the analog servo motor should be over 1A and servo sg90 are analog servos need to continuously provide a PMW signal, then it will be work normally.
- See more on Amazon...
Brand: Miuzei | Manufacturer: Miuzei
Weight: 3.31 Pounds
See On Amazon #5
LewanSoul 20KG RC Servo High Torque Servo Motors, Waterproof Full Metal Gear Steering Servo for 1/6 1/8 1/10 1/12 RC Car Robot DIY, Digital Servo with 25T Servo Horn, Control Angle 180
Asin: B073F92G2S | Model: LD-20MG | PartNumber: LD-20MG | Ean: 0651519699249 | UPC: 651519699249
【Superior Quality & High Performance】This Digital Rc Servo Comes With Metal Gear And Dual-Ball Bearings, Which Are Well-Made With Exceptional Performance, Stability, And Minimal Noise Output. By Integrating A High-Precision Potentiometer, Its Accuracy And Linearity Are Greatly Enhanced Leading To An Extended Service Life..
【Excellent After-Sale Service】We Value All Customer's Shopping Experiences. If You Come Across Any Issues With Our Products, Please Don't Hesitate To Reach Out To Us, And We Will Try Our Best To Help Within 24 Hours. Order Today With Peace Of Mind!.
【Size & Weight】Size: 40*20*40.5Mm (1.57*0.8*1.59Inch); Weight: 68G (0.15 Pound)..
【Perfect Servo For Model Diy & Ip67 Waterproof】It Fits 1/6 1/8 1/10 1/12 Rc Cars, Robots, Vehicle/Boat/Airplane Models, And Any Diy. Crafted With High Precision And Thorough Sealing, This Rc Servo Provides Ip67 Water Resistance, Which Allows It To Operate Even In The Presence Of Water Splashes..
【20Kg-180°High Torque Servo Motor】This Rc Servo Boasts A Maximum Torque Of 20Kg.Cm 7.4V, Enhanced By Its Accompanying Metal Servo Arm. Delivering Robust Power, It Is Housed Within An Anodized Aluminum Case That Facilitates Excellent Heat Dissipation And Effectively Reduces Power Consumption..
Features
- Note LD-20MG model has been renamed as HPS-2018MG as part of our brand's upgrade.
- 20kg-180 High Torque Servo Motor This rc servo boasts a maximum torque of 20KG.CM 7.4V, enhanced by its accompanying metal servo arm. Delivering robust power, it is housed within an anodized aluminum case that facilitates excellent heat dissipation and effectively reduces power consumption.
- Superior Quality & High Performance This digital RC servo comes with metal gear and dual-ball bearings, which are well-made with exceptional performance, stability, and minimal noise output. By integrating a high-precision potentiometer, its accuracy and linearity are greatly enhanced leading to an extended service life.
- Perfect Servo for Model DIY & IP67 Waterproof It fits 1/6 1/8 1/10 1/12 RC cars, robots, vehicle/boat/airplane models, and any DIY. Crafted with high precision and thorough sealing, this rc servo provides IP67 water resistance, which allows it to operate even in the presence of water splashes.
- Excellent After-sale Service We value all customer's shopping experiences. If you come across any issues with our products, please don't hesitate to reach out to us, and we will try our best to help within 24 hours. Order today with peace of mind!
- Size & Weight Size: 40*20*40.5mm (1.57*0.8*1.59inch); Weight: 68g (0.15 pound).
- See more on Amazon...
Brand: LewanSoul | Manufacturer: LewanSoul
Dimensions: 0.79 x 1.57 x 1.59 inches | Weight: 0.15 Pounds
See On Amazon #6
INJORA Coreless High Torque Micro Servo with Mount and Servo Horn for SCX24 C10 JLU Bronco Axial 1/24 RC Crawler Car Upgrade Parts (Black)
Asin: B0BTBQC1FQ
【Perfect Combination】This Servo Is Equipped With Metal Mount And Servo Horn, Replaces The Original Plastic Accessories..
【Note】Not Compatible With The Original Scx24 Servo Tray And Servo Horn..
【Application Scope】Water Resistant With O-Ring Seal, Perfect For Scx24 C10 Jlu Bronco Axial 1/24 Rc Crawler Car Upgrade Parts..
【Excellent Performance】 High Precise Metal Gear, With Better Accuracy And Longer Service Life..
Features
- Brand Product INJORA coreless metal gear high torque digital micro servo, high sensitivity, stable and low-noise.
- Excellent Performance High precise metal gear, with better accuracy and longer service life.
- Perfect Combination This servo is equipped with metal mount and servo horn, replaces the original plastic accessories.
- Application Scope Water Resistant with O-ring seal, perfect for SCX24 C10 JLU Bronco Axial 1/24 RC Crawler Car Upgrade Parts.
- Note Not compatible with the original SCX24 servo tray and servo horn.
- See more on Amazon...
Brand: INJORA | Manufacturer: INJORA
See On Amazon #7
OGRC RC Digital Servo Tester/ESC Consistency Tester for RC Helicopter Airplane Car(Servo Tester,ESC Consistency Tester,RC Helicopter Tester Tool)
Asin: B08DM2CP3T | Model: 124 | PartNumber: 124 | Ean: 0192817043971 | UPC: 192817043971
【Keys Pulse Width】1. 50H Analog Servo Signal Cycle 20Us Frequency 50Hz, 2. 125H Digital The Steering Gear A Signal Cycle 8Us Frequency 125Hz,3. 250H Digital Servo Signal Cycle 4Us Frequency 250Hz.
【How To Use】Digital Or Analog Signal Button Selects The Corresponding Servo System And Then Plugs Into The Steering Servo To Avoid Damage To The Steering Servo.
【Powerful Testing Function】Rc Plane Servo Tester Can Test The Steering Gear Is Able To Respond To Subtle Changes With Ppm Signal Test Function In The Display.
【Button The Select】 (Note: The Key Switch Function, Circulation Patterns) 1. S-1 Manual Mode (Manual) 2.S-2-Bit Mode (Neutral) 3.S-3 Automatic Mode (Automatic).
Features
- High Srecision The RC ESC tester used to compare the performance steering gear control of the steering servo output signal can be accurate to 2us (1 milliseconds = 1000 microseconds)
- Button The Select (Note: the key switch function, circulation patterns) 1. S-1 manual mode (Manual) 2.S-2-bit mode (Neutral) 3.S-3 automatic mode (Automatic)
- Keys Pulse Width 1. 50H analog servo signal cycle 20us frequency 50Hz, 2. 125H digital the steering gear a signal cycle 8us frequency 125Hz,3. 250H Digital Servo signal cycle 4us frequency 250Hz
- Powerful Testing Function RC plane servo tester can test the steering gear is able to respond to subtle changes With PPM signal test function in the display
- How To Use Digital or analog signal button selects the corresponding servo system and then plugs into the steering servo to avoid damage to the steering servo
- See more on Amazon...
Brand: GLOBACT | Manufacturer: Globact
Weight: 0.09 Pounds
See On Amazon #8
INJORA RC Servo Steering Servo with Servo Mount Bracket and Arm for AX24 RC Car Boat Model Parts Axial SCX24 Upgrade Parts (Brass Black)
Asin: B0BFF7ZSZ2 | Model: ES08MA-M | PartNumber: ES08MA-M
Stable Performance --Reinforced Metal Gears, Enhance Anti-Interference Ability, Make Rc Car Respond Quickly.
Attentive Service --Equipped With Servo Bracket And Arm, Easy To Install, Make More Fun For Rc.
Widely Use -- Exquisite Part, Perfect For Axial Scx24 Or Rc Helicopters, Small Robots, And Other Models.
Replacement Accessory -- Well-Controlled, A Great Replacement For The Old Or Damaged Rc Part.
Features
- Good Quality -- Made of high quality material, high sensitivity, and quickly dissipate heat, stable and low-noise
- Replacement Accessory -- Well-controlled, A great replacement for the old or damaged RC part
- Stable performance --Reinforced metal gears, enhance anti-interference ability, make RC car respond quickly
- Widely use -- Exquisite part, perfect for Axial Scx24 or RC Helicopters, small robots, and other models
- Attentive service --Equipped with servo bracket and arm, easy to install, make more fun for RC
- See more on Amazon...
Brand: INJORA | Manufacturer: INJORA
Dimensions: 0.79 x 1.97 x 1.97 inches
See On Amazon #9
Miuzei 2Pcs 25KG High Torque RC Servo, Waterproof Servo Motor Compatible with 1/8, 1/10 RC Car, Full Metal Gear Steering Servo with 25T Servo Horn 270
Asin: B0C5LTKBD4
High Torque Servo Motor：It Reacts Quickly And The Maximum Torque Is Up To 27.5Kg,Cm At 8.4V. Waterproof Servo, Full Metal Gear Servo Rc Car Servo, Quiet Servo Motor, Light Weight, Running 270°Degree Servo..
Application Fields: Servo Rc Suitable For Airboats, Rc Car, Robots, Intelligent Diy, Also Rigid Wings, Helicopters, And Other Rc Models..
Rc Servo: 25Kg Digital Servo Have High Torque, High Speed, Fast Response, Stable Performance, Strong Anti-Interference Ability, And Fast Heat Dissipation..
Servo Motors: Servo Motor High Torque Matal Gear Equipped With Double Ball Bearing, Less Noise, More Stable Torque. After The Upgrade Of Rc Servos, Two Functions Are Added, Servos For Rc Cars Can Be Automatically Protected With Anti-Burning And Rotor Blocking Protection; 5S Overload Protection, 70 ℃ Overheat Protection..
Features
- 25kg Servo: rc servo high torque built-in brush motor and stable motherboard, precise angle without deviation.
- Servo Motors: servo motor high torque matal gear equipped with double ball bearing, less noise, more stable torque. After the upgrade of RC Servos, two functions are added, servos for rc cars can be automatically protected with anti-burning and rotor blocking protection; 5S overload protection, 70 overheat protection.
- High Torque Servo Motor it reacts quickly and the maximum torque is up to 27.5kg,cm At 8.4V. Waterproof servo, Full metal gear servo rc car servo, quiet servo motor, light weight, Running 270 degree servo.
- Rc Servo: 25kg digital servo have high torque, high speed, fast response, stable performance, strong anti-interference ability, and fast heat dissipation.
- Application Fields: servo rc suitable for airboats, rc car, robots, intelligent DIY, also rigid wings, helicopters, and other RC models.
- See more on Amazon...
Brand: Miuzei | Manufacturer: Miuzei
See On Amazon #10
BETU 70kg Brushless Servo, Waterpoof Servo, High Torque Servo Compatible with 1/5 1/6, 1/8, 1/10 RC Car/Robot/Boat
Asin: B0CCTNH5XX | Ean: 0738061145582 | UPC: 738061145582
High Voltage Servo: Betu 70Kg Brushless Servo Adapts To High Voltage 4.8~8.4V, High-Pressure Steering Servo, More Powerful And Powerful, Longer Life..
Product Dimension: 1.57 X 0.78 X 1.57 Inch(40 X 20 X 39.8 Mm); Weight:2.7Oz (80G); With One 25T Adjustable Metal Servo Arm..
All Metal Servo: Equipped With Full Aluminum Case And Metal Gear, Cnc Aluminium Middle Shell, Less Noise, Light Weight, Higher Operating Accuracy..
70Kg Waterpoof Servo: Waterproof Performance Ip67. Controllable Angle Range From 0 To 180 Degrees, Excellent Linearity, Precision Control..
Features
- High Torque Servo 70kg Brushless Servo's maximum torque is up to 55 kg/cm-4.8V, 70 kg/cm-8.4V, high torque, Compatible with 1/5 1/6, 1/8, 1/10 RC Car / Robot / Boat.
- 70kg Waterpoof Servo: Waterproof performance IP67. Controllable angle range from 0 to 180 degrees, Excellent linearity, precision control.
- High voltage Servo: BETU 70kg Brushless Servo Adapts to High voltage 4.8~8.4V, High-pressure steering servo, more powerful and powerful, longer life.
- All metal servo: Equipped with full aluminum case and Metal Gear, CNC aluminium middle shell, less noise, light weight, higher operating accuracy.
- Product Dimension: 1.57 x 0.78 x 1.57 inch(40 x 20 x 39.8 mm); Weight:2.7oz (80g); With one 25T adjustable metal servo arm.
- See more on Amazon...
Brand: BETU | Manufacturer: BETU
Dimensions: 1.59 x 1.57 x 0.79 inches
See On Amazon #11
12PCS MG90S Servo Micro 180 9G Servo Motor Geared Micro Servo Motor 9G Smart Robot Compatible with Raspberry Pi Project Car Helicopter Airplane Boat (180 Rotating)
Asin: B0925V3X2S | Ean: 0701715470583 | UPC: 701715470583
Stall Torque: 2.0Kg/Cm(4.8V); Operating Speed: 0.11 Seconds / 60 Degrees (4.8V).The Servo Maximum Angle Is 180..
The Model Is Suitable For Ordinary Small Electric Aircraft Models And Is Not Recommended In Large Fixed Wing And Electric Helicopter..
The Great Gear Micro Motor Servos For Helicopter/Boat/Car/Remote Controlled Aircraft Diy. Fit For Electronics Diy Compatible With Arduino, Raspberry Pi..
Mg90s Micro Servo Gear With Less Noise,The Gears Help With The Movement, These Will Rotate The Proper Direction..
Features
- 100% new, good quality ,MG90S micro servo motor, updated SG90 serve motor.
- MG90S micro servo gear with less noise,the gears help with the movement, these will rotate the proper direction.
- Stall Torque: 2.0kg/cm(4.8V); Operating Speed: 0.11 seconds / 60 degrees (4.8V).The servo Maximum angle is 180.
- The great gear micro motor servos for helicopter/boat/car/remote controlled aircraft DIY. Fit for electronics DIY compatible with Arduino, Raspberry Pi.
- The model is suitable for ordinary small electric aircraft models and is not recommended in large fixed wing and electric helicopter.
- See more on Amazon...
Brand: DORHEA | Manufacturer: DORHEA
See On Amazon #12
[2-Pack] Servo Motor MG995 Control Angle 180 Metal Gear Servo Waterproof Digital High Speed Torque Servo Motor for RC Airplane Helicopter Mechanical Arm Car
Asin: B09JWK2GB3 | Model: MG995 | PartNumber: MG995 | Ean: 0765343061971 | UPC: 765343061971
Torque At 6V 12Kg/Cm, 7.2V 13Kg/Cm. Positioning Speed At 4.8V Without Load 0.17S / 60 Degrees;6.0V Without Load 0.13S / 60 Degrees.
This Servo Offers A Full Range Of 180° With Metal Gears. Application:Rc Robot, Airplane Control, Robot Arm And Boats. Fit For All Kind Of R/C Toys And Arduino Experiments..
Connector Wire Length 300Mm. Stable And Shock Proof Double Coreless Motor, Metal Gear, Ball Bearing Design,Through External Adapter..
This High-Speed Standard Servo Motor Can Rotate 180 Degrees (90 In Each Direction)..
Features
- Good performance digital standard servo, which can be a common use for robots, mechanical arms, climbing cars and remote control toys.
- This high-speed standard servo motor can rotate 180 degrees (90 in each direction).
- Torque at 6V 12kg/cm, 7.2V 13kg/cm. Positioning speed at 4.8V without load 0.17s / 60 degrees;6.0V without load 0.13s / 60 degrees
- Connector wire length 300mm. Stable and shock proof double coreless motor, metal gear, ball bearing design,Through external adapter.
- This servo offers a full range of 180 with metal gears. Application:RC robot, airplane control, robot arm and boats. Fit for all kind of R/C toys and Arduino experiments.
- See more on Amazon...
Brand: Beffkkip | Manufacturer: Beffkkip
See On Amazon #13
Hosyond DS3235 35kg Digital RC Servo High Torque All Metal Gear Coreless Motor Waterproof Servo Motors for RC Robot, Car, Truck (Control Angle 270 )
Asin: B0CJFR6KV9 | Ean: 0741421390409 | UPC: 741421390409
Coreless Motor: This Servo Uses A Coreless Motor, A Type Of Motor That Typically Has High Speed And Fast Response Characteristics That Perform Well In Applications That Require Fast Action..
Wide Working Range: The Servo Provides A 270-Degree Working Angle And Has Different Torques Under Different Voltages, With The Maximum Torque Up To 35Kg/Cm @7.4V. This Means It Has A Wide Adjustability Range And Is Suitable For Different Types Of Applications Including Remote Control Cars, Crawlers And Trucks..
Counterclockwise Rotation: The Ds3235sg Rotates Counterclockwise When The Input Signal Is 1500-2500 Microseconds. This Is A Common Rotation Direction In Remote Control Applications And Facilitates Use With Other Devices And Components..
High Quality Construction: The Housing Is Composed Of Engineering Plastic And Aluminum Alloy, Providing Rugged External Protection While Featuring A Dual-Bearing Design For Added Durability And Reliability. Stainless Steel Gears And Ip67 Water Resistance Further Enhance Its Durability..
Features
- Precise position control: This digital servo supports PWM control with a wide pulse width range from 500 microseconds to 2500 microseconds, including 1500 microseconds in the neutral position. This allows it to provide very precise position control, making it suitable for applications requiring a high degree of accuracy.
- High Quality Construction: The housing is composed of engineering plastic and aluminum alloy, providing rugged external protection while featuring a dual-bearing design for added durability and reliability. Stainless steel gears and IP67 water resistance further enhance its durability.
- Coreless Motor: This servo uses a coreless motor, a type of motor that typically has high speed and fast response characteristics that perform well in applications that require fast action.
- Counterclockwise rotation: The DS3235SG rotates counterclockwise when the input signal is 1500-2500 microseconds. This is a common rotation direction in remote control applications and facilitates use with other devices and components.
- Wide working range: The servo provides a 270-degree working angle and has different torques under different voltages, with the maximum torque up to 35kg/cm @7.4V. This means it has a wide adjustability range and is suitable for different types of applications including remote control cars, crawlers and trucks.
- See more on Amazon...
Brand: Hosyond | Manufacturer: Hosyond
Dimensions: 1.77 x 2.12 x 0.79 inches | Weight: 0.21 Pounds
See On Amazon #14
Yaohappy 5Pair Black Amass XT90 XT-90 Male Female Bullet Connectors Power Plug with Heat Shrink for RC Lipo Battery Motor
Asin: B09L7GVWQ3 | Model: Yaohappy-XT60E-M-5Pairs | PartNumber: Yaohappy-XT60E-M-5Pairs | Ean: 5714405919229
Resistance To Current 90 A (Continuous), 120 A (Peak), Suitable For Needs Plugs And 90-120A Current Application Of Occasion. For Example, 250 Helicopters, Current Car Small Boat Molds..
Solid High-Amp Connection,Perfect For Rc Lipo Battery.Often Used In Remote Control Aircraft And Rc Models, Rc Charger And So On..
Xt90 Adopts The 4.5Mm Banana Plug, Upgrade Version - Light Weight, Small Size, High Current Indurance Performance.
Xt90 Connector With High Temperature Nylon Material,Genuine Amass Connector.
Features
- Amass XT90 bullet connector provides solid and reliable connection,reusable connector end design for times insert and take off from the Enclosure.With high current indurance performance ,it could be used many times, reach to 1000 times.
- XT90 connector with high temperature nylon material,Genuine Amass Connector
- Resistance to current 90 A (Continuous), 120 A (Peak), suitable for needs Plugs and 90-120A current application of occasion. For example, 250 Helicopters, current car Small Boat Molds.
- XT90 adopts the 4.5mm banana plug, upgrade version - Light weight, small size, high current indurance performance
- Solid high-amp connection,perfect for RC lipo battery.Often used in remote control aircraft and Rc models, RC Charger and so on.
- See more on Amazon...
Brand: Yaohappy | Manufacturer: Yaohappy
Dimensions: 0.20 x 1.18 x 0.79 inches
See On Amazon #15
3Packs RC Servo Signal Reverser Rotation Inverter 3.6V - 24V 5A Steering Gear Reverser for JR Futaba Aircraft Airplane Steering Gear and Any Servos
Asin: B0BC1C3H7H | Model: Servo Signal Reverser | PartNumber: Servo Signal Reverser
Simple Installation: Only Need To Be Installed In Series On The Reverse Servo Channel Of The Receiver To Use, Easy To Operate..
For Rotation Control: Rc Servo Signal Reverser Is Used To Make The Servo Rotate Forward Or Reverse, Is Practical And Reliable..
Multiple Usages: Suitable For Operation And Control Of Rc Aircraft And Other Steering Gears, With A Wide Range Of Uses..
Reliable Performance: The Operating Voltage Is 3.6‑24V, The Current Is 5A, And The Performance Is Stable And Reliable.Plug Type : Jr Male And Female..
Features
- Durable Material: Made of excellent ABS material, which has high hardness and wear resistance, and can be used for a long time.
- Reliable Performance: The operating voltage is 3.6 24V, the current is 5A, and the performance is stable and reliable.Plug Type : JR Male and Female.
- Simple Installation: Only need to be installed in series on the reverse servo channel of the receiver to use, easy to operate.
- Multiple Usages: Suitable for operation and control of RC aircraft and other steering gears, with a wide range of uses.
- For Rotation Control: RC servo signal reverser is used to make the servo rotate forward or reverse, is practical and reliable.
- See more on Amazon...
Brand: Nuofany | Manufacturer: Nuofany
Dimensions: 0.10 x 0.10 x 0.10 inches
See On Amazon #16
Miuzei MG90S 9G Micro Servo Motor Metal Geared Motor Kit for RC Car Robot Helicopter, Mini Servos for Arduino Project (4)
Asin: B0CP98TZJ2 | Model: ms90 srevo motor | PartNumber: ms90 srevo motor
Operating Voltage 4.8V~ 6V. Operating Temperature: 0°C ~ +55°C. Dead Zone Width：5 Microseconds.
Wide Applications: Tiny And Lightweight With High Output, This Mini Small Micro Servo Is Perfect For Rc Airplanes, Helicopters, Quadcopters,Boat, Car, Electronics Diy Or Robots..
Metal Gear: Aluminum Metal Teeth, Coreless Motor, Double Ball Bearin. Metal Gear With Less Noise For Added Strength And Durability..
Stall Torque: 2.0Kg/Cm(4.8V). Operating Speed: 0.11 Seconds/60 Degrees (4.8V)..
Features
- MG90S Micro Servo Motor, updated SG90 serve motor.
- Stall Torque: 2.0kg/cm(4.8V). Operating Speed: 0.11 seconds/60 degrees (4.8V).
- Operating Voltage 4.8V~ 6V. Operating Temperature: 0 C ~ +55 C. Dead Zone Width 5 Microseconds
- Metal Gear: Aluminum metal teeth, coreless motor, double ball bearin. Metal Gear with less noise for added strength and durability.
- Wide Applications: Tiny and lightweight with high output, this mini small micro servo is perfect for RC airplanes, helicopters, quadcopters,boat, car, electronics DIY or robots.
- See more on Amazon...
Brand: Miuzei | Manufacturer: Miuzei
See On Amazon #17
AGFRC 40KG Waterproof RC-Steering-Servo High-Torque - Full Metal Gear Brushless Digital Servo for 1/10 RC Car, Control Angle 180 (A73BHLW V2)
Asin: B08HH5V9VB | Model: A73BHLW | PartNumber: A73BHLW | Ean: 0671072398281 | UPC: 671072398281
【Programmable】 This High Torque Rc Crawler Servo Is Programmable By The Agf-Spv3 Servo Programmer (Not Include) To Change The Torque, Speed, Angle, Inversion, Neutral Position, Etc..
【Standard Size & Application】 A73bhlw V2 Servo With A Standard Servo Size:40*20*37.5Mm (1.57*0.79*1.48In), Ideal For 1/10 On Road, Off Road, Rc Crawlers , Monster Trucks, Buggies, Rc Boats And Other Vehicles That Require High Level Waterproof..
【Ip67 Waterproof Design】 When You Cross The Mountains And Pass The Charming Stream, Fully Magnetic Waterproof Ip67 Grade Can Let Your Rc Model Play In Humid Environment Or Rainy Day..
【Upgrade Version & High Quality】 This Upgraded A73bhlw V2 Brushless Servo Motor Uses The Upgraded Thicker Pin Shafts And All Strengthen Steel Gears, Which Is More Sturdy And Durable And Has Stronger Shockproof Performance..
Features
- High Precision & Torque Advanced linearity and accuracy, stable, low noise, waterproof, dust-proof. The maximum torque of this rc crawler steering servo is up to 40 kg-cm (556 oz-in) @ 8.4V and speed up to 0.100sec/60 @ 8.4V.
- Upgrade Version & High Quality This upgraded A73BHLW V2 brushless servo motor uses the upgraded thicker pin shafts and all strengthen steel gears, which is more sturdy and durable and has stronger shockproof performance.
- Programmable This high torque rc crawler servo is programmable by the AGF-SPV3 servo programmer (not include) to change the torque, speed, angle, inversion, neutral position, etc.
- IP67 Waterproof Design When you cross the mountains and pass the charming stream, fully magnetic waterproof IP67 grade can let your rc model play in humid environment or rainy day.
- Standard Size & Application A73BHLW V2 servo with a standard servo size:40*20*37.5mm (1.57*0.79*1.48in), ideal for 1/10 on road, off road, RC crawlers , monster trucks, buggies, RC boats and other vehicles that require high level waterproof.
- See more on Amazon...
Brand: AGFRC | Manufacturer: AGF-RC Electronic Technology CO.,Ltd
Dimensions: 1.48 x 1.57 x 0.79 inches | Weight: 0.22 Pounds
See On Amazon #18
INJORA RC Servo 12g Digital Servo with Metal Mount and 15T Arm for AX24 Axial SCX24 Car Model Upgrade Parts(Red)
Asin: B09TB33XJ2
Injora Digital Servo, Enhance Anti-Interference Ability, Make Rc Car Respond Quickly.
Equipped With Servo Bracket And Arm, Easy To Install, Make More Fun For Rc.
Perfect For 1/24 Rc Crawler Car Axial Scx24 Gladiator Axi90081 Deadbolt And Other Models.
Well-Controlled, A Great Replacement For The Old Or Damaged Rc Part.
Features
- Made of high quality material, high sensitivity, and quickly dissipate heat, stable and low-noise
- Well-controlled, A great replacement for the old or damaged RC part
- INJORA digital servo, enhance anti-interference ability, make RC car respond quickly
- Perfect for 1/24 RC Crawler Car Axial Scx24 Gladiator AXI90081 Deadbolt and other models
- Equipped with servo bracket and arm, easy to install, make more fun for RC
- See more on Amazon...
Brand: INJORA | Manufacturer: INJORA
Dimensions: 3.82 x 5.47 x 0.71 inches
See On Amazon #19
Treedix 2 pcs MG996R Servo Motor Metal Gear High-Torque Servo Motor for Smart Car Robot Boat RC Helicopter Mechanical arm Fittings(Control Angle 360)
Asin: B08743N181 | Model: TRX2-0052 | PartNumber: TRX2-0052
360-Degree Servo Is Equivalent To A Stepless Variable Speed Motor, Which Can Control The Speed And Direction.Stable And Shock Proof, Metal Gear.
Mainly Used For 1:10 And 1: 8 Flat Sports Cars, Off-Road Vehicles, Trucks, Big Cars, Climbing Cars, Biped Robots, Manipulators, Remote Control Boats, Suitable For 50-90 Class Methanol Fixed-Wing Aircraft And 26Cc-50Cc Gasoline Fixed-Wing Aircraft And Other Models..
The Control Method Is The Same As The Control Signal Of General Servo. Suitable Power Source For The Modification Of Wali..
Compatible With Most Standard Receiver Connector: Futaba, Hitec, Sanwa, Gws, Etc..
Features
- Upgraded version from MG995, control angle upgraded from 180 to 360 , have corresponding increase in speed, tension and accuracy.
- Compatible with most standard receiver connector: Futaba, Hitec, Sanwa, GWS, etc.
- 360-degree servo is equivalent to a stepless variable speed motor, which can control the speed and direction.Stable and shock proof, metal gear
- The control method is the same as the control signal of general servo. Suitable power source for the modification of Wali.
- Mainly used for 1:10 and 1: 8 flat sports cars, off-road vehicles, trucks, big cars, climbing cars, biped robots, manipulators, remote control boats, suitable for 50-90 class methanol fixed-wing aircraft and 26cc-50cc gasoline fixed-wing aircraft and other models.
- See more on Amazon...
Brand: Treedix | Manufacturer: Treedix
Dimensions: 1.60 x 1.68 x 0.77 inches
See On Amazon #20
DKKY EMax ES08MAII Analog Servo with Mount and 15T Arm for Axial SCX24 Gladiator 1/24 RC Crawler Car Truck Model Parts Accessories (Red)
Asin: B0B5MW9QQN
3.Upgrade High Torque Analog Scx24 Emax Steering Gear, Large Steering Angle. Responsive And Accurate..
5. Suitable For Axial Scx24 Gladiator Bronco C10 Jlu Deadbolt B17 Or Rc Helicopter, Small Robot And Other Models.
4.This Scx24 Servo Is Equipped With Metal Brackets And Servo Horns, Replacing The Original Plastic Accessories..
2. High-Precision Metal Gear, Higher Precision And Longer Service Life..
Features
- 1. Emax ES08MAII 12g analog steering gear, high sensitivity, stable and low noise.
- 2. High-precision metal gear, higher precision and longer service life.
- 3.Upgrade high torque analog scx24 emax steering gear, large steering angle. Responsive and accurate.
- 4.This scx24 servo is equipped with metal brackets and servo horns, replacing the original plastic accessories.
- 5. Suitable for Axial scx24 Gladiator Bronco C10 JLU Deadbolt B17 or RC helicopter, small robot and other models
- See more on Amazon...
Brand: DKKY DKKY Racing | Manufacturer: Ky-RC
See On Amazon #21
Apex RC Products Double Sided Clear Servo Tape 10 Foot ROLL (25mm x 3m) 10' Easy Remove 3010
Asin: B00A1B27ZE | Model: 3010-TAPE | PartNumber: 3010-TAPE | Ean: 0094393426219 | UPC: 094393426219
Giant 10 Foot Roll (About 3 Meters) - Length: 3M X Width: 25Mm X Thickness: 1Mm (10Ft X 1In X .04In).
Soft & Pliable - Very Easy To Work With..
Super Sticky - Bonds Well To Most Surfaces. Great For Attaching Anything Without Screws Or Hardware..
Double Sided Tape Holds Servos, Esc's, Receivers, Electronics In Place On Cars, Drones, Quadcopters.
Features
- BEST SERVO TAPE IN R/C - Easily peels off in one piece and leaves almost no residue!
- DOUBLE SIDED TAPE holds Servos, ESC's, Receivers, Electronics in place on Cars, Drones, Quadcopters
- GIANT 10 Foot Roll (about 3 Meters) - Length: 3m x Width: 25mm x Thickness: 1mm (10ft x 1in x .04in)
- SUPER STICKY - Bonds well to most surfaces. Great for attaching anything without screws or hardware.
- SOFT & PLIABLE - Very easy to work with.
- See more on Amazon...
Brand: Apex RC Products | Manufacturer: Apex RC Products
Dimensions: 0.90 x 5.10 x 3.60 inches
See On Amazon #22
BUZHI Digital Servo 80kg Metal Gear 270 High Torque Waterproof Replacements for 1/5 HSP HPI RC Car Baja Car
Asin: B0D1XZH8YQ
Metal Gear High Torque For Rc Car, Crawler And Robot..
If There Are Any Problems, Please Contact Our Store In Time. We Will Give You A Satisfactory Solution..
Cnc Precision Gear, It Is More Wear-Resistant And Not Easy To Break And Teeth..
Great Choice For University Professors And Students Who Are Interested In Developing Software For Robot Parts..
Features
- Performance: With anti blocking and anti burning ion function, with waterproof function.
- Great choice for university professors and students who are interested in developing software for robot parts.
- Metal gear high torque for RC car, crawler and robot.
- CNC precision gear, it is more wear-resistant and not easy to break and teeth.
- If there are any problems, please contact our store in time. We will give you a satisfactory solution.
- See more on Amazon...
Brand: BUZHI | Manufacturer: BUZHI
Dimensions: 1.57 x 3.35 x 2.56 inches
See On Amazon #23
Leimezsty Metal Geared Micro Servo for Toy Boat Car Airplane Helicopter Micro Metal Gear Servo 9g Micro Servo Digital Servo
Asin: B0D22DVC74 | Ean: 7543020661354
360 Degrees Steering Gear Is Continuous Rotation For Module..
Is Analog Steering Gear.It Is Suitable For The Swashplate Steering Gear Of 450 Helicopers, Small Robots, Manipulators, Ship Models. Car Models.
It Is Recommended To Usde The Metal Gear Steering Gear, Which Is More And Has Enough Torque Measured By Many Players..
Scope Of Applicatiothe Main Difference Between These Several Types Of Steering Gear Is The Difference In Gear Material, Torque And Rotation Angle..
Features
- Mechanical steering angle of 90 degrees, all gear, wear resistance, and the machine is not capable of being smashed. The model is not afraid to bump the steering gear.n: fixed wing, helicopter, KT, fluttering, gliding, small robot, manipulator and other models.
- Scope of applicatioThe main difference between these several types of steering gear is the difference in gear material, torque and rotation angle.
- 360 degrees steering gear is continuous rotation for module.
- It is recommended to usde the metal gear steering gear, which is more and has enough torque measured by many players.
- is analog steering gear.It is suitable for the swashplate steering gear of 450 helicopers, small robots, manipulators, ship models. car models
- See more on Amazon...
Brand: Leimezsty | Manufacturer: Leimezsty
See On Amazon #24
flexman Digital Servo Tester, 8 Channels Servo Controller with LED Indicator, 8 Way 0~180 Knob Control Onboard STM Steering Gear Controller for RC Car Airplane Robots
Asin: B0D222RPBC | Model: flexmancr1ei3vgub | PartNumber: flexmancr1ei3vgub
Knob Control: The Steering Gear Controller Has 8 Way Knob Adjustment, And Directly Turning The Potentiometer Can Control The Steering Gear To Rotate Within The Range Of 0 To 180 Degrees..
Led Indicator: The Servo Controller Has A Mode Indicator. When The Led Flashes, It Means That The Power Supply Current Is Not Enough, And The Power Supply Needs To Be Replaced..
High Accuracy: The Control Accuracy Of The Steering Gear Controller Is 0.09 Degrees, The Error Is Extremely Small, And The Response Is Sensitive..
Switchable Mode: The Servo Controller Supports Manual Mode And Return Mode, Which Can Be Switched By Buttons, Which Is Very Convenient To Use And Operate..
Features
- Onboard STM: The onboard STM is used to generate high resolution PWM signals, with precise control and plug and play.
- Switchable Mode: The servo controller supports manual mode and return mode, which can be switched by buttons, which is very convenient to use and operate.
- Knob Control: The steering gear controller has 8 way knob adjustment, and directly turning the potentiometer can control the steering gear to rotate within the range of 0 to 180 degrees.
- High Accuracy: The control accuracy of the steering gear controller is 0.09 degrees, the error is extremely small, and the response is sensitive.
- LED Indicator: The servo controller has a mode indicator. When the LED flashes, it means that the power supply current is not enough, and the power supply needs to be replaced.
- See more on Amazon...
Brand: flexman | Manufacturer: flexman
Dimensions: 1.18 x 5.91 x 5.12 inches
Warranty: Manufacturer warranty for 90 day
See On Amazon #25
DIY Pinion Motor Gear Combo Set, 1pc 2Modulus 25Teeth Precision Bevel Gear Bore Diameter 10-25mm 90 Degrees Transmission Bevel Gear (Color : 25Teeth, Size : Bore 14mm Keaway 5mm)
Asin: B0D1Y7C7XL | Model: HEAGER | PartNumber: HEAGER | Ean: 7439749558702
Widely Used In Conveying, Agricultural Equipment, Textile Machinery, Printing Machinery, Cnc Machines, 3D Printers, Rc Models, Robot Diy, Automotive Applications, Etc..
If You Have Any Questions, Please Feel Free To Contact Us. We Will Give You A Satisfactory Reply And Look Forward To Your Purchase. Have A Nice Life, Thank You..
This Bevel Gear Is Used Together With Its Matched Bevel Gear, And The Mechanical Power Transmission Is Efficient, The Torque Is Large, The Working Noise Is Low, And It Provides Good Comprehensive Mechanical Performance.
Made Of 45# Steel Material, The Bevel Tooth Surface Is Quenched, And Has Excellent Wear Resistance.
Features
- The bevel gear is cast with exquisite production technology, the size is precise, the gear teeth meshing is complete and tight, and the power transmission ratio is stable
- Made of 45# steel material, the bevel tooth surface is quenched, and has excellent wear resistance
- Widely used in conveying, agricultural equipment, textile machinery, printing machinery, CNC machines, 3D printers, RC models, robot DIY, automotive applications, etc.
- This bevel gear is used together with its matched bevel gear, and the mechanical power transmission is efficient, the torque is large, the working noise is low, and it provides good comprehensive mechanical performance
- If you have any questions, please feel free to contact us. We will give you a satisfactory reply and look forward to your purchase. Have a nice life, thank you.
- See more on Amazon...
Brand: HEAGER | Manufacturer: HEAGER
Weight: 0.44 pounds
See On Amazon #26
YXQ 500mm Servo Extension Cable 3 Pin Male to Female Lead Wire for RC Airplane (20Pcs)
Asin: B01HLUZQ4G | Model: LMT09300942 | PartNumber: LMT09300942 | Ean: 0709112928454 | UPC: 709112928454
∈Female To Male Servo Extension Cable: Featured With Female Connector On One Side And Male Connector On The Other Side, Can Be Connected To The Receiving Set And Steering Engine.
∈Package Content : 20 Pcs X Rc Servo Extension Lead Wire.
∈Servo Extension Leads Are Compatible With Futaba And Jr Servo, Plane And Helicopter Servo Connection Or Receiver Connection, Remote Control Car, Rc Car.
∈Pin Number : 3;Extension Length : 50Cm/19.7".
Features
- Product Name :Servo Extension Lead Wire;Connect Type : Male to Female
- Pin Number : 3;Extension Length : 50cm/19.7
- Female to male servo extension cable: featured with female connector on one side and male connector on the other side, can be connected to the receiving set and steering engine
- Servo extension leads are compatible with Futaba and JR servo, plane and helicopter servo connection or receiver connection, remote control car, RC Car
- Package Content : 20 Pcs x RC Servo Extension Lead Wire
- See more on Amazon...
Brand: YXQ | Manufacturer: YXQ
See On Amazon #27
MMOBIEL 12 Pcs 3-Pin RC Servo Extention Cables Female - Male for Servo Extention Connection Control Board RC Drone, Car, Robot, etc. (4 Sizes)
Asin: B098PC3YXZ | Ean: 8720011028825
Compatible With Remote Control Drones, Helicopters, Cars, Boats, And All Sorts Of Rc Toys And Hobby Projects. Can Also Be Used With Any Type Of Arduino Project, Raspberry Pi, Futaba, Jr, Sanwa And Hitec Remote System..
Product Provided By Mmobiel - We Always Try Our Best To Exceed Your Expectations At Every Turn. Join The Ever Growing List Of Satisfied Customers And Discover The Difference With Mmobiel..
Set Contains: 3 X Servo Cable 7 Cm / 3 Inch, 3 X Servo Cable 15Cm / 6 Inch, 3 X Servo Cable 30 Cm / 12 Inch, 3 X Servo Cable 60 Cm / 24 Inch..
Application: These Servo Extension Leads Are Compatible With Futaba And Jr Servo's, Can Can Be Used For Rc Drones, Cars, Planes, Helicopters, Robots, Trucks, Off-Road Buggies , Etc. Can Be Connected To The Receiving Set And Steering Engine..
Features
- Material: Made of 22-AWG 60 Twisted Copper Cores making it much more flexible than standard servo cables. The wires are twisted to reduce electromagnetic interference (EMI).
- Application: These Servo Extension Leads are Compatible with Futaba and JR servo's, can can be used for RC Drones, Cars, Planes, Helicopters, Robots, Trucks, Off-Road Buggies , etc. Can be connected to the Receiving set and Steering Engine.
- Compatible with Remote Control Drones, Helicopters, Cars, Boats, and all sorts of RC Toys and hobby projects. Can also be used with any type of Arduino project, Raspberry Pi, Futaba, JR, Sanwa and Hitec remote system.
- Set Contains: 3 x Servo Cable 7 cm / 3 inch, 3 x Servo Cable 15cm / 6 inch, 3 x Servo Cable 30 cm / 12 inch, 3 x Servo Cable 60 cm / 24 inch.
- Product provided by MMOBIEL - We always try our best to exceed your expectations at every turn. Join the ever growing list of satisfied customers and discover the difference with MMOBIEL.
- See more on Amazon...
Brand: MMOBIEL | Manufacturer: MMOBIEL
See On Amazon #28
AGFRC Mini-Z-Car Micro Steering Servo - 0.052Sec HV High Speed Full Metal Gear Mini Digital Coreless Servo for Small Airplane Glider (A06CLS V2(Black))
Asin: B09DKLHT6Q | Model: A11CLS | PartNumber: A11CLS
▶Programmable - This Micro Wing Servo Is Programmable By The Agf-Spv3 Servo Programmer(Not Include) To Change The Torque, Speed, Angle, Inversion, Etc..
▶Application - This Agfrc Digital Rc Servo Can Be Used Mini Z Cars, 1/18, 1/24, 1/27, 1/28 Scale Cars Such As Gl Racing Gld, Gla V2.1, Glr, Glf-1, Glr Gt; Small Size Airplane, Glider, Sailplane, Such As F3p, Gld Airplane Etc..
▶Mini Size - The High Speed Servo Is With A Small Size. 20*8*17.8Mm (0.79*0.31*0.70 In).
▶Durable - Agfrc Coreless Mini-Z Car Servo Adopts Full Cnc Aluminium Housing And Structure, High Precision Titanium Gear And High Quality Coreless Motor..
Features
- Upgrade & High Performance - A06CLS V2 is the A06CLS upgrade version, After the upgrade, it supports 8.4V high voltage, and the speed and torque have also been enhanced. Can be used as wing servo in small aircraft and other applications. The maximum torque of this steering servo is up to 3.0 kg-cm (41 oz-in) @ 8.4V, and speed up to 0.052sec/60 @ 8.4V
- Durable - AGFRC coreless mini-z car servo adopts full CNC Aluminium housing and structure, high precision Titanium gear and high quality coreless motor.
- Programmable - This micro wing servo is programmable by the AGF-SPV3 servo programmer(not include) to change the torque, speed, angle, inversion, etc.
- Mini Size - The high speed servo is with a small size. 20*8*17.8mm (0.79*0.31*0.70 in)
- Application - This AGFRC digital rc servo can be used mini z cars, 1/18, 1/24, 1/27, 1/28 Scale Cars such as GL Racing GLD, GLA V2.1, GLR, GLF-1, GLR GT; small size airplane, glider, sailplane, such as F3P, GLD Airplane etc.
- See more on Amazon...
Brand: AGFRC | Manufacturer: AGF-RC Electronic Technology CO.,Ltd
Dimensions: 0.70 x 0.79 x 0.31 inches | Weight: 0.01 Pounds
Warranty: Manufacturer warranty for 1 year from date of purchase.
See On Amazon #29
ZHOFONET 5 Pairs XT30 Pigtail,XT30 Male and Female Plug,XT30 Connector Adapter with 10cm 16AWG Silicone Wire for RC Lipo Battery FPV Racing Drone
Asin: B09LYHHS9J | Ean: 0746131378372 | UPC: 746131378372
Often Used In Remote Control Aircraft And More Rc Models , Rc Charger And So On..
Quantity: 5Pairs Xt30 Drone Battery Connectors..
Provides Solid And Reliable Connection,Reusable Connector End Design For Times Insert And Take Off From The Enclosure.Rates Up To 55A Continuous. Provides Solid And Reliable Connection..
Pigtail Ends Stripped And Pre Tinned, Save Time To Solder..
Features
- High Quality Female and Male XT30 Connectors with 10cm 16AWG Soft Silicone Wire Cable.
- Pigtail ends stripped and pre tinned, save time to solder.
- Often used in remote control aircraft and More RC models , RC Charger and so on.
- Provides Solid and Reliable Connection,reusable Connector end design for times insert and take off from the Enclosure.Rates up to 55A continuous. Provides solid and reliable connection.
- Quantity: 5pairs XT30 drone battery connectors.
- See more on Amazon...
Brand: ZHOFONET | Manufacturer: ZHOFONET
See On Amazon #30
8Pcs JST Plug Y Splitter,JST to JR Male Female Wire Adapter JST Y-Harness Connectors Parallel Extension Cable Compatible with Traxxas TRX-4 RC Crawler Receiver ESC Winch Cooling Fan Led Lights
Asin: B09D3FK1LD | Model: XZ255 | PartNumber: XZ255 | Ean: 0048518400547 | UPC: 048518400547
Made Of 20Awg Silicone,Soft And Durable To Use..
Cable Length: 15Cm/5.9Inch For Y Splitter Cable, 10Cm/3.9Inch For Jst To Jr Cable.Please Note Cable Length Does Not Contain The Plugs Housing,Only The Cable Length.The Measurements Allowed Error Is 1-2Cm..
These Cables Compatible With 1/10 Traxxas Slash Trx4 Axial Scx10 Redcat Gen7 Hsp Rc4wd Tamiya D90 Hpi Rc Car, Mini Rc Helicopter And Indoor 3D Plane, Also Great For Small Lipo And Nimh Connection..
These Can Used On Esc,Rc Motor Servo,Motor Cooling Fan,Light Bar,Headlight,Winch Etc....
Features
- Total 8Pcs JST Cable,designed for different application scenarios: 1 JST male to 2 JST female Y harness,1 JST male to 3 JST female Y harness,1 JST female to 2 JST female Y harness,1 JST female to 3 JST female Y harness;JST Male to JR male cable,JST male to JR female cable,JST female to JR female cable,JST female to JR male cable.
- These can used on ESC,RC motor servo,motor cooling fan,light bar,headlight,winch etc...
- Made of 20AWG silicone,soft and durable to use.
- These cables compatible with 1/10 Traxxas Slash TRX4 Axial SCX10 Redcat GEN7 HSP RC4WD Tamiya D90 HPI RC car, mini RC helicopter and indoor 3D plane, also great for small Lipo and NiMH connection.
- Cable length: 15cm/5.9inch for Y splitter cable, 10cm/3.9inch for JST to JR cable.Please note cable Length does not contain the plugs housing,only the cable length.The measurements allowed error is 1-2cm.
- See more on Amazon...
Brand: Vgoohobby | Manufacturer: Vgoohobby
See On Amazon
Looking For Something Else?
Search