Frontpage > Automotive > Oxygen Sensor Removers

Best Oxygen Sensor Removers - Buying Guide

Last Updated: 05/02/2024

Share on

Bestselling Oxygen Sensor Removers on Amazon

  1. A ABIGAIL 5 PCS Automotive O2 Oxygen Sensor Socket Offset Wrench Remover Tool and Thread Chaser Tool
  2. GOHAWKTEQ Automotive Oxygen Sensor Socket Removal Tool Wrench and Thread Chaser Set 5Pcs
  3. 7PCS Oxygen Sensor Socket 22mm (7/8 in), 27mm, 29mm fits All Vehicle O2 Removal and Installation Uni...
  4. Zlirfy 5PCS Oxygen Sensor Removers,Automotive Oxygen Sensor Socket Wrench Remover Tool and Thread Ch...
  5. Orion Motor Tech 7pc Oxygen Sensor Socket Set, O2 Sensor Removal Kit, Oil Pressure Sensor Socket Wre...
  6. ITEQ 5 Pcs Automotive Oxygen Sensor Socket Wrench Remover tool and Thread Chaser Set
  7. DURATECH 5PCS O2 Oxygen Sensor Socket Thread Chaser Set, 3/8" 1/2" Drive x 7/8" 22mm Oxygen Sensor W...
  8. Automotive O2 Oxygen Sensor Socket Offset Wrench Remover Tool, 3/8-Inch Drive, 7/8-Inch (22mm), Wire...
  9. DAYUAN 10Pcs Oxygen Sensor Socket Set Sensor Oil Pressure Sending Unit Removal Kit
  10. ARES 70318-10-Piece Oxygen Sensor Socket Set - Set Includes Thread Chasers, Oxygen Sensor Sockets, a...
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.

  #1

A ABIGAIL 5 PCS Automotive O2 Oxygen Sensor Socket Offset Wrench Remover Tool and Thread Chaser Tool

Asin: B07KT1GR7V

Features

  • Design Standard 6 point with low profile and slotted design to enable you remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots.
  • USE Built for use with ratchets and breakers bars to remove and install oxygen sensors and hex vacuum switches on vehicle, even if you don't have a lot of experience working with cars. This high quality tool can save your time!
  • Package 1-pc 3/8 Dr. extra deep broach socket (3-1/8 long), 1-pc 3/8 Dr. low-profile crowfoot socket wrench (1-1/4 long), 1-pc 1/2 Dr. offset crowfoot socket wrench (1-15/16 long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8 drive to clean and repair damaged threads
  • Material Made from high performance chrome molybdenum and solid cast steel construction for strength and durability - Finished with Black Oxide to prevent rust.
  • Service 100% satisfaction guarantee, If you have any issues with the Oxygen Sensor Socket Wrench and Thread Chaser Set, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you.
  • See more on Amazon...

【Package】1-Pc 3/8” Dr. Extra Deep Broach Socket (3-1/8” Long), 1-Pc 3/8” Dr. Low-Profile Crowfoot Socket Wrench (1-1/4” Long), 1-Pc 1/2” Dr. Offset Crowfoot Socket Wrench (1-15/16” Long), 1-Pc M18 X 1.5Mm And 1-Pc M12 X 1.25Mm Thread Chasers With 3/8” Drive To Clean And Repair Damaged Threads.
【Service】100% Satisfaction Guarantee, If You Have Any Issues With The Oxygen Sensor Socket Wrench And Thread Chaser Set, Simply Contact Customer Service For Troubleshooting Help, Parts, Replacement, Or Refund. Our Aim Is To Make You Satisfy The Parts And The Service We Provide For You..
【Material】 Made From High Performance Chrome Molybdenum And Solid Cast Steel Construction For Strength And Durability - Finished With Black Oxide To Prevent Rust..
【Use】 Built For Use With Ratchets And Breakers Bars To Remove And Install Oxygen Sensors And Hex Vacuum Switches On Vehicle, Even If You Don't Have A Lot Of Experience Working With Cars. This High Quality Tool Can Save Your Time!.

Brand: A ABIGAIL   |   Manufacturer: A ABIGAIL

Amazon Price: $19.98 | as of 05/02/2024 (2:20pm pst) *DETAILS
Availability: In Stock

See On Amazon




  #2

GOHAWKTEQ Automotive Oxygen Sensor Socket Removal Tool Wrench and Thread Chaser Set 5Pcs

Asin: B082M4LL6K

Features

  • Usage: This tool sets are used to remove. Inspect, replace and install oxygen sensors and vacuum switches on vehicles and engines.
  • Package: There are 5pcs sockets and wrenches included in the red case, 1-pc 3/8 Dr. extra deep broach socket (3-1/8 long), 1-pc 3/8 Dr. low-profile crowfoot socket wrench (1-1/4 long), 1-pc 1/2 Dr. offset crowfoot socket wrench (1-15/16 long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8 drive to clean and repair damaged threads
  • Material: These sockets and wrenches are forged with high quality steel and gain a high strength which give them a better performance.
  • Design: Special side cutout design allows easy access to oxygen sensor from section and prevents from demage to wire.
  • Warranty: We offer 30 days and 365 days free replacement warranty.
  • See more on Amazon...

Material: These Sockets And Wrenches Are Forged With High Quality Steel And Gain A High Strength Which Give Them A Better Performance..
Warranty: We Offer 30 Days And 365 Days Free Replacement Warranty..
Design: Special Side Cutout Design Allows Easy Access To Oxygen Sensor From Section And Prevents From Demage To Wire..
Package: There Are 5Pcs Sockets And Wrenches Included In The Red Case, 1-Pc 3/8” Dr. Extra Deep Broach Socket (3-1/8” Long), 1-Pc 3/8” Dr. Low-Profile Crowfoot Socket Wrench (1-1/4” Long), 1-Pc 1/2” Dr. Offset Crowfoot Socket Wrench (1-15/16” Long), 1-Pc M18 X 1.5Mm And 1-Pc M12 X 1.25Mm Thread Chasers With 3/8” Drive To Clean And Repair Damaged Threads.

Brand: GOHAWKTEQ   |   Manufacturer: GOHAWKTEQ

Amazon Price: $17.99 | as of 05/02/2024 (2:20pm pst) *DETAILS
Availability: In Stock
List Price: $19.99

See On Amazon




  #3

7PCS Oxygen Sensor Socket 22mm (7/8 in), 27mm, 29mm fits All Vehicle O2 Removal and Installation Universal Puller and Removal Tool

Asin: B07QGCS1B7

Features

  • High Qulity Made of high performance chrome molybdenum and solid cast steel construction for strength and durability - Finished with Black Oxide to prevent rust and corrosion.
  • Size 7mm slot, 7/8 (22mm) x 6-point x 3-1/10 (80mm) length, 3/8 inch square drive for use with ratchet. Fits all standard oxygen sensors with a 7/8 hexagon nut.
  • Design Standard 6 point with low profile and 8mm x 64mm side cutout design to enable you remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots.
  • USE Built for use with 3/8 ratchets, 1 wrenches, and breakers bars to remove and install oxygen sensors and hex vacuum switches on vehicle, even if you don't have a lot of experience working with cars. This high quality tool can save your time!
  • Service 100% satisfaction guarantee, If you have any issues with the oxygen sensor socket, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you.
  • See more on Amazon...

【Design】Standard 6 Point With Low Profile And 8Mm X 64Mm Side Cutout Design To Enable You Remove Oxygen Sensors With The Wiring Harness Still Attached, And The Socket Is Offset And Compact Which Allows Extra Leverage Even In Hard To Reach Spots..
【Service】100% Satisfaction Guarantee, If You Have Any Issues With The Oxygen Sensor Socket, Simply Contact Customer Service For Troubleshooting Help, Parts, Replacement, Or Refund. Our Aim Is To Make You Satisfy The Parts And The Service We Provide For You..
【Use】 Built For Use With 3/8” Ratchets, 1” Wrenches, And Breakers Bars To Remove And Install Oxygen Sensors And Hex Vacuum Switches On Vehicle, Even If You Don't Have A Lot Of Experience Working With Cars. This High Quality Tool Can Save Your Time!.
【Size】 7Mm Slot, 7/8” (22Mm) X 6-Point X 3-1/10” (80Mm) Length, 3/8 Inch Square Drive For Use With Ratchet. Fits All Standard Oxygen Sensors With A 7/8” Hexagon Nut..

Brand: A ABIGAIL   |   Manufacturer: A ABIGAIL

Amazon Price: $32.99 | as of 05/02/2024 (2:20pm pst) *DETAILS
Availability: In Stock

See On Amazon




  #4

Zlirfy 5PCS Oxygen Sensor Removers,Automotive Oxygen Sensor Socket Wrench Remover Tool and Thread Chaser Set,O2 Oxygen Sensor Socket Set for Removing and Install Oxygen Sensors,Hex Vacuum Switches

Asin: B0C6DVR5LK   |   Model: 533YCGQCXTZ001   |   PartNumber: 533YCGQCXTZ001

Features

  • [High Quality Material] Made of high-strength chromium vanadium steel. Please rest assured that our products are sturdy enough to install and remove oxygen sensors. The outer layer is protected from oxidation and rust through phosphating and electroplating, extending its service life.
  • [Package Includes] 1 piece of 3/8 Dr. ultra deep drawing knife socket (3-1/8 long), 1 piece of 3/8 Dr. thin crowbar socket wrench (1-1/4 long), 1 piece of 1/2 Dr. offset crowbar socket wrench (1-15/16 long), and 1 piece of M18 x 1.5mm and 1 piece of M12 x 1.25mm threaded groove with 3/8 driver for cleaning and repairing damaged threads.
  • [Features] Special side cut design allows for easy access to the oxygen sensor from any part and prevents damage to the wires.
  • [Convenient Storage] The disassembly tool for the automotive oxygen sensor socket wrench is equipped with a storage box, which can protect the tool well during transportation and allow you to keep the tool well after use.
  • [Applicable] The oxygen sensor sleeve kit is perfect for removing, inspecting, replacing, and installing heated and non heated oxygen sensors and vacuum switches on most vehicles equipped with computer-controlled engines.
  • See more on Amazon...

[Features] Special Side Cut Design Allows For Easy Access To The Oxygen Sensor From Any Part And Prevents Damage To The Wires..
[Applicable] The Oxygen Sensor Sleeve Kit Is Perfect For Removing, Inspecting, Replacing, And Installing Heated And Non Heated Oxygen Sensors And Vacuum Switches On Most Vehicles Equipped With Computer-Controlled Engines..
[Convenient Storage] The Disassembly Tool For The Automotive Oxygen Sensor Socket Wrench Is Equipped With A Storage Box, Which Can Protect The Tool Well During Transportation And Allow You To Keep The Tool Well After Use..
[Package Includes] 1 Piece Of 3/8 "Dr. Ultra Deep Drawing Knife Socket (3-1/8" Long), 1 Piece Of 3/8 "Dr. Thin Crowbar Socket Wrench (1-1/4" Long), 1 Piece Of 1/2 "Dr. Offset Crowbar Socket Wrench (1-15/16" Long), And 1 Piece Of M18 X 1.5Mm And 1 Piece Of M12 X 1.25Mm Threaded Groove With 3/8 "Driver For Cleaning And Repairing Damaged Threads..

Brand: Zlirfy   |   Manufacturer: Zlirfy

Warranty: no

Amazon Price: $17.49 | as of 05/02/2024 (2:20pm pst) *DETAILS
Availability: In Stock

See On Amazon




  #5

Orion Motor Tech 7pc Oxygen Sensor Socket Set, O2 Sensor Removal Kit, Oil Pressure Sensor Socket Wrench Set with 22mm 27mm 29mm Sockets 1/2" 3/8" Drives, Oxygen Thermal Oil Pressure Sensor Removers

Asin: B09Q84Y55J   |   Model: 1007-00   |   PartNumber: 1007-00

Features

  • 7-PIECE SOCKET SET: This Orion Motor Tech set comprises a 22mm vacuum switch socket with 3/8" drive, 29mm thermal switch socket with 1/2" drive, 22mm O2 sensor socket with 3/8" drive, 27 mm injector socket with 1/2" drive, 27mm oil sender unit socket with 3/8" drive, 22mm offset O2 sensor wrench with 3/8" drive, and 22mm offset O2 sensor wrench with 1/2" drive
  • HEAVY-DUTY TOOLS: Each of the 5 sockets is made of heat-treated chrome vanadium steel with electroplated chrome coating, while the 2 offset sensor wrenches boast chrome molybdenum steel with black oxide finish, with all parts ensuring superior wear & corrosion resistance and long-term durability under even punishing use
  • WIDE APPLICATION: Perfect for removal and installation of oxygen sensors, oil pressure sending units, diesel injectors, vacuum switches, and thermal sensor switches, this heavy-duty sensor socket removal kit is compatible with Audi, BMW, Citroen, Mercedes, Peugeot, Renault, Skoda, Vauxhall/Opel, and Volkswagen models
  • EASY OPERATION: The slotted design of the sockets enables you to remove oxygen sensors with the wiring still attached, while the offset wrenches allow for extra leverage with your breaker bar or ratchet even in hard-to-reach spots; the precision forged slotting gives you maximum torque with minimum effort; and the large engraved sizes on each piece offer quick identification
  • HELPFUL STORAGE: A special blow-molded case comes included for neat and protected storage, while this complete automotive tool set weighs only 4.4 pounds to give you convenient transportation from home to garage to workshop
  • See more on Amazon...

Wide Application: Perfect For Removal And Installation Of Oxygen Sensors, Oil Pressure Sending Units, Diesel Injectors, Vacuum Switches, And Thermal Sensor Switches, This Heavy-Duty Sensor Socket Removal Kit Is Compatible With Audi, Bmw, Citroen, Mercedes, Peugeot, Renault, Skoda, Vauxhall/Opel, And Volkswagen Models.
Helpful Storage: A Special Blow-Molded Case Comes Included For Neat And Protected Storage, While This Complete Automotive Tool Set Weighs Only 4.4 Pounds To Give You Convenient Transportation From Home To Garage To Workshop.
Easy Operation: The Slotted Design Of The Sockets Enables You To Remove Oxygen Sensors With The Wiring Still Attached, While The Offset Wrenches Allow For Extra Leverage With Your Breaker Bar Or Ratchet Even In Hard-To-Reach Spots; The Precision Forged Slotting Gives You Maximum Torque With Minimum Effort; And The Large Engraved Sizes On Each Piece Offer Quick Identification.
Heavy-Duty Tools: Each Of The 5 Sockets Is Made Of Heat-Treated Chrome Vanadium Steel With Electroplated Chrome Coating, While The 2 Offset Sensor Wrenches Boast Chrome Molybdenum Steel With Black Oxide Finish, With All Parts Ensuring Superior Wear & Corrosion Resistance And Long-Term Durability Under Even Punishing Use.

Brand: Orion Motor Tech   |   Manufacturer: Orion Motor Tech

Dimensions: 2.00 x 9.00 x 7.00 inches

Warranty: 1 Year Warranty

Amazon Price: $31.99 | as of 05/02/2024 (2:20pm pst) *DETAILS
Availability: In Stock
Used Price: $27.52

See On Amazon




  #6

ITEQ 5 Pcs Automotive Oxygen Sensor Socket Wrench Remover tool and Thread Chaser Set

Asin: B07P24HCY1   |   Model: 13   |   PartNumber: 13   |   Ean: 0607111538424   |   UPC: 607111538424

Features

  • Perfect tool set for removing, inspecting, replacing and installing heated and non heated oxygen sensors and vacuum switches on most vehicles with computer-controlled engines
  • 3 types of universal socket wrenchs cover various situations of oxygen sensor location
  • 6-point 7/8 (22mm) socket opening fits all hexagon oxygen sensor, common 3/8 and 1/2 drive ends can be used with ratchet or breaker bar
  • Special side cutout design allows easy access to oxygen sensors from any section and prevents damage to wires
  • Set Including: 1-pc 3/8 Dr. extra deep broach socket (3-1/8 long), 1-pc 3/8 Dr. low-profile crowfoot socket wrench (1-1/4 long), 1-pc 1/2 Dr. offset crowfoot socket wrench (1-15/16 long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8 drive to clean and repair damaged threads
  • See more on Amazon...

6-Point 7/8” (22Mm) Socket Opening Fits All Hexagon Oxygen Sensor, Common 3/8” And 1/2” Drive Ends Can Be Used With Ratchet Or Breaker Bar.
Set Including: 1-Pc 3/8” Dr. Extra Deep Broach Socket (3-1/8” Long), 1-Pc 3/8” Dr. Low-Profile Crowfoot Socket Wrench (1-1/4” Long), 1-Pc 1/2” Dr. Offset Crowfoot Socket Wrench (1-15/16” Long), 1-Pc M18 X 1.5Mm And 1-Pc M12 X 1.25Mm Thread Chasers With 3/8” Drive To Clean And Repair Damaged Threads.
Special Side Cutout Design Allows Easy Access To Oxygen Sensors From Any Section And Prevents Damage To Wires.
3 Types Of Universal Socket Wrenchs Cover Various Situations Of Oxygen Sensor Location.

Brand: ITEQ   |   Manufacturer: ITEQ

Dimensions: 0.87 x 3.15 x 0.87 inches   |   Weight: 1.81 Pounds

Amazon Price: $18.99 | as of 05/02/2024 (2:20pm pst) *DETAILS
Availability: In Stock
List Price: $19.99

See On Amazon




  #7

DURATECH 5PCS O2 Oxygen Sensor Socket Thread Chaser Set, 3/8" 1/2" Drive x 7/8" 22mm Oxygen Sensor Wrench Remover O2 Sensor Removal Tool Kit

Asin: B0CF8MJDF8   |   Ean: 0820909796695   |   UPC: 820909796695

Features

  • O2 Sensor Socket Set: The package includes 1PC 1/2" Dr. x 7/8" (22mm) offset oxygen sensor socket, 1PC 3/8" Dr. x 7/8" (22mm) offset oxygen sensor socket, 1PC 3/8" Dr. x 7/8" (22mm) long oxygen sensor socket, 1PC M12 x 1.25mm thread chaser and 1PC M18 x 1.5mm thread chaser.
  • Premium Material: The oxygen sensor remover set is made of high-quality alloy steel, meets and exceeds ANSI/ASME standards. It has surface phosphating and heat treatment to improve material performance and make it more durable.
  • Special Design: The wire gate of each O2 sensor removal tool is wide enough to pass through the wire without damaging it, which is both convenient and safe. And the square hole of this socket has a unique slotted design. These small slots have a good anti-slip effect, which can help to hold the ratchet firmly, making you more secure when using the tool.
  • 2 Thread Chasers: The M12-1.25 and M18-1.5 thread chasers can be used with a 3/8 ratchet. This kind of tool is designed to re-tap threads, clean and repair damaged threads, remove rust and prevent future cross-threading.
  • Wide Application: This O2 sensor remover set is suitable for removing, inspecting, replacing, and installing heated and non heated oxygen sensors and vacuum switches on most vehicles equipped with computer-controlled engines. As an important auto accessory, it is easy to use, convenient and practical, which can save your time and energy.
  • See more on Amazon...

Special Design: The Wire Gate Of Each O2 Sensor Removal Tool Is Wide Enough To Pass Through The Wire Without Damaging It, Which Is Both Convenient And Safe. And The Square Hole Of This Socket Has A Unique Slotted Design. These Small Slots Have A Good Anti-Slip Effect, Which Can Help To Hold The Ratchet Firmly, Making You More Secure When Using The Tool..
Wide Application: This O2 Sensor Remover Set Is Suitable For Removing, Inspecting, Replacing, And Installing Heated And Non Heated Oxygen Sensors And Vacuum Switches On Most Vehicles Equipped With Computer-Controlled Engines. As An Important Auto Accessory, It Is Easy To Use, Convenient And Practical, Which Can Save Your Time And Energy..
2 Thread Chasers: The M12-1.25" And M18-1.5" Thread Chasers Can Be Used With A 3/8" Ratchet. This Kind Of Tool Is Designed To Re-Tap Threads, Clean And Repair Damaged Threads, Remove Rust And Prevent Future Cross-Threading..
Premium Material: The Oxygen Sensor Remover Set Is Made Of High-Quality Alloy Steel, Meets And Exceeds Ansi/Asme Standards. It Has Surface Phosphating And Heat Treatment To Improve Material Performance And Make It More Durable..

Brand: DURATECH   |   Manufacturer: Hangzhou Great Star Industrial Co,.LTD

Amazon Price: $20.99 | as of 05/02/2024 (2:20pm pst) *DETAILS
Availability: In Stock

See On Amazon




  #8

Automotive O2 Oxygen Sensor Socket Offset Wrench Remover Tool, 3/8-Inch Drive, 7/8-Inch (22mm), Wire Gate Accesses Sensor from Side, Preventing Damage to Wires, Universal for Most Models

Asin: B0BK98P1HX

Features

  • High Quality Material: Made of high-quality chromium-molybdenum steel, the sleeve allows the user to apply maximum torque, while precision casting ensures accurate fit and function, strength and durability-black oxide surface treatment to prevent rust.
  • Design: The standard 6-point slotted design allows you to remove the oxygen sensor while still connecting the wiring harness, and the socket is biased and compact, providing extra leverage even in hard-to-reach places, very convenient, please rest assured use.
  • Characteristic: Removes and installs oxygen sensors on vehicles with computer-controlled engines,Common 6 point, 7/8 in. (22mm) socket fits most oxygen sensors,Use with any 3/8 inch drive ratchet or breaker bar,Offset drive with wire gate accesses sensor from the side, not the top, preventing damage to wires.
  • Function: Even if you don't have a lot of experience working with cars, you can replace your O2 sensor with this tool to help with your car's emissions and gas mileage. This high quality tool can save your time!
  • What will you get: 1 x Offset Oxygen Sensor Socket. As with all of our products, you are covered. If you have any questions, please contact us in time, we will reply you within 24 hours.
  • See more on Amazon...

Characteristic: Removes And Installs Oxygen Sensors On Vehicles With Computer-Controlled Engines,Common 6 Point, 7/8 In. (22Mm) Socket Fits Most Oxygen Sensors,Use With Any 3/8 Inch Drive Ratchet Or Breaker Bar,Offset Drive With Wire Gate Accesses Sensor From The Side, Not The Top, Preventing Damage To Wires..
What Will You Get: 1 X Offset Oxygen Sensor Socket. As With All Of Our Products, You Are Covered. If You Have Any Questions, Please Contact Us In Time, We Will Reply You Within 24 Hours..
Function: Even If You Don't Have A Lot Of Experience Working With Cars, You Can Replace Your O2 Sensor With This Tool To Help With Your Car's Emissions And Gas Mileage. This High Quality Tool Can Save Your Time!.
Design: The Standard 6-Point Slotted Design Allows You To Remove The Oxygen Sensor While Still Connecting The Wiring Harness, And The Socket Is Biased And Compact, Providing Extra Leverage Even In Hard-To-Reach Places, Very Convenient, Please Rest Assured Use..

Brand: NTNEV   |   Manufacturer: NTNEV

Amazon Price: $9.59 | as of 05/02/2024 (2:20pm pst) *DETAILS
Availability: In Stock

See On Amazon




  #9

DAYUAN 10Pcs Oxygen Sensor Socket Set Sensor Oil Pressure Sending Unit Removal Kit

Asin: B07V36G9MY   |   Ean: 0793345497795   |   UPC: 793345497795

Features

  • REMOVE OXYGEN SENSORS FROM YOUR VEHICLE: This 10 Piece Specialty Sockets O2 Sensor Tool Set lets you quickly and easily remove oxygen sensors, oil pressure sending unit, fuel injectors, and vacuum switches; Some O2 socket pieces feature cutout sides to prevent damage to wires and tubes; Remove and install parts on most domestic and some international vehicles
  • USE WITH YOUR TOOLS: Features 3/8-inch or 1/2-inch square drive to fit your O2 sensor wrench drives; For use with ratchet, breaker bar, or hand wrench (driver tools not included); Not compatible with impact tools; Use this tool in conjunction with the O2 Sensor Thread Chasers to install new sensors easily (thread chaser and sensors not included)
  • BUILT TO LAST: Constructed of heat-treated chrome vanadium steel, this oxygen sensor remover set is built for strength, durability, and longevity; Each 02 sensor socket is coated with a black oxide finish to provide resistance to rust and corrosion
  • CONTENTS: This specialty tools set includes 10 pieces: 1/2 inch dr x 22mm x 6PT x 110mm, 1/2 inch dr x 29mm x 6PT x 90mm, 1/2 inch dr x 22mm x 12PT x 78mm, 1/2 inch dr x 27mm x 12PT x 78mm, 1/2 inch dr x 28mm x 12PT x 78mm, 1/2 inch dr x 7/8 x 50mm, 3/8 inch dr x 7/8 x 6PT x 80mm, 3/8 inch dr x 7/8 x 6PT x 90mm, 3/8 inch dr x 7/8 x 30mm, and 3/8 inch dr x 1 and 1-1/6 x 74mm
  • CONVENIENT STORAGE: The plastic blow-molded case is included to provide safe storage, fast organization, and easy transportation; Case measures at 11.8 x 9.8 x 2.5 inches (29.9 x 24.9 x 6.3 cm) and features locking latches and a comfortable handle
  • See more on Amazon...

Built To Last: Constructed Of Heat-Treated Chrome Vanadium Steel, This Oxygen Sensor Remover Set Is Built For Strength, Durability, And Longevity; Each 02 Sensor Socket Is Coated With A Black Oxide Finish To Provide Resistance To Rust And Corrosion.
Convenient Storage: The Plastic Blow-Molded Case Is Included To Provide Safe Storage, Fast Organization, And Easy Transportation; Case Measures At 11.8 X 9.8 X 2.5 Inches (29.9 X 24.9 X 6.3 Cm) And Features Locking Latches And A Comfortable Handle.
Contents: This Specialty Tools Set Includes 10 Pieces: 1/2 Inch Dr X 22Mm X 6Pt X 110Mm, 1/2 Inch Dr X 29Mm X 6Pt X 90Mm, 1/2 Inch Dr X 22Mm X 12Pt X 78Mm, 1/2 Inch Dr X 27Mm X 12Pt X 78Mm, 1/2 Inch Dr X 28Mm X 12Pt X 78Mm, 1/2 Inch Dr X 7/8” X 50Mm, 3/8 Inch Dr X 7/8” X 6Pt X 80Mm, 3/8 Inch Dr X 7/8” X 6Pt X 90Mm, 3/8 Inch Dr X 7/8” X 30Mm, And 3/8 Inch Dr X 1” And 1-1/6” X 74Mm.
Use With Your Tools: Features 3/8-Inch Or 1/2-Inch Square Drive To Fit Your O2 Sensor Wrench Drives; For Use With Ratchet, Breaker Bar, Or Hand Wrench (Driver Tools Not Included); Not Compatible With Impact Tools; Use This Tool In Conjunction With The O2 Sensor Thread Chasers To Install New Sensors Easily (Thread Chaser And Sensors Not Included).

Brand: DAYUAN   |   Manufacturer: Yinyuan tools

Amazon Price: $39.50 | as of 05/02/2024 (2:20pm pst) *DETAILS
Availability: In Stock

See On Amazon




  #10

ARES 70318-10-Piece Oxygen Sensor Socket Set - Set Includes Thread Chasers, Oxygen Sensor Sockets, an Injector Socket and Oil Sending Unit Sockets - High Strength Chrome Vanadium Steel

Asin: B073WHGNZ3   |   Ean: 0818765026704   |   UPC: 818765026704

Features

  • INCLUDES: This set includes a 29mm 1/2-inch drive Vacuum Switch Socket, 27mm 1/2-inch drive Injector Socket, 27mm 3/8-inch drive Oil Sender Unit 1-inch Socket, 22mm 3/8-inch drive Vacuum Switch Socket, 22mm 1/2-inch drive Heated O2 Sensor Socket, 27mm 3/8-inch drive Oil Sender Unit 1-1/16-inch Socket, 22mm 3/8-inch drive 6-Pt Offset O2 Sensor Wrench, M12 x 1.25mm and M18 x 1.5mm O2 Sensor Rethread Tools, and a 22mm 1/2-inch Drive Deep Offset O2 Sensor Socket."
  • QUALITY: All tools in this 10-piece Oxygen Sensor Socket Set are constructed of high strength Chrome Vanadium Steel with a Manganese Phosphate coating to resist corrosion.
  • STORAGE: This Oxygen Sensor Socket set comes complete with convenient storage case so you'll never misplace a socket on the job again!
  • RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES Oxygen Sensor Socket Set, simply contact customer service for troubleshooting help, parts, replacement, or refund.
  • ASPCA BUSINESS AMBASSADOR: We are proud to be part of the ASPCA Business Ambassador Program. If you have a pet, you realize they are more than a pet, they are part of the family. With your support, we re proud to help this great organization.
  • See more on Amazon...

Storage: This Oxygen Sensor Socket Set Comes Complete With Convenient Storage Case So You'll Never Misplace A Socket On The Job Again!.
Aspca Business Ambassador: We Are Proud To Be Part Of The Aspca Business Ambassador Program. If You Have A Pet, You Realize They Are More Than A Pet, They Are Part Of The Family. With Your Support, Weâ€Re Proud To Help This Great Organization.".
Reliable | Effective | Efficient: Users Trust Ares To Be Quality Tools. You Are Backed By Our Performance Assurance Limited Lifetime Warranty. If You Have Any Issues With Your Ares Oxygen Sensor Socket Set, Simply Contact Customer Service For Troubleshooting Help, Parts, Replacement, Or Refund.".
Quality: All Tools In This 10-Piece Oxygen Sensor Socket Set Are Constructed Of High Strength Chrome Vanadium Steel With A Manganese Phosphate Coating To Resist Corrosion.".

Brand: ARES   |   Manufacturer: ARES

Warranty: Performance Assurance Limited Lifetime Warranty

Amazon Price: $64.02 | as of 05/02/2024 (2:20pm pst) *DETAILS
Availability: In Stock

See On Amazon




  #11

ARES 14021 Double Sided Flexible O2 Sensor Wrench Flex Head Design for Access in Tight Spaces 6 Point and 12 Point Socket Head Configurations - Remove and Install 7/8 (22mm) O2 Sensors

Asin: B0BL1XGG6Z   |   Model: 14021   |   PartNumber: 14021   |   Ean: 0840129909125   |   UPC: 840129909125

Features

  • SPECIFICATIONS: This Double Sided Flexible O2 Sensor Wrench offers broad coverage for removing and installing 7/8 (22mm) O2 sensors, featuring a dual-sided design with both 6-point and 12-point configurations. This wrench features an angled 10-inch handle, granting enhanced access to confined spaces.
  • DESIGN: Constructed of premium chrome vanadium steel, this sturdy wrench also features a chrome plated handle and black phosphate socket head that offer enhanced durability and greater corrosion resistance. The double knurled handle offers better grip and control than an untextured handle, making it easier than ever to remove and install oxygen sensors.
  • APPLICATION: The angled 10-inch handle and flex-head design of this wrench allows it to work in tight spaces and areas with obstructions. The 12-point side of the socket head allows the wrench to engage at a greater variety of angles for recessed sensors with limited clearance, while the 6-point side provides a better grip on stubborn sensors. Both socket head sides fit and easily remove and install 7/8 (22mm) O2 sensors.
  • RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools that make an impact. You are backed by our Performance Assurance. If you have any issues with your ARES Double Sided Flexible O2 Sensor Wrench, simply contact customer service for troubleshooting help, parts, replacement, or refund.
  • ASPCA BUSINESS AMBASSADOR: We are proud to be part of the ASPCA Business Ambassador Program. If you have a pet, you realize they are more than a pet, they are part of the family. With your support, we re proud to help this great organization.
  • See more on Amazon...

Application: The Angled 10-Inch Handle And Flex-Head Design Of This Wrench Allows It To Work In Tight Spaces And Areas With Obstructions. The 12-Point Side Of The Socket Head Allows The Wrench To Engage At A Greater Variety Of Angles For Recessed Sensors With Limited Clearance, While The 6-Point Side Provides A Better Grip On Stubborn Sensors. Both Socket Head Sides Fit And Easily Remove And Install 7/8” (22Mm) O2 Sensors..
Aspca Business Ambassador: We Are Proud To Be Part Of The Aspca Business Ambassador Program. If You Have A Pet, You Realize They Are More Than A Pet, They Are Part Of The Family. With Your Support, We’Re Proud To Help This Great Organization..
Reliable | Effective | Efficient: Users Trust Ares To Be Quality Tools That Make An Impact. You Are Backed By Our Performance Assurance. If You Have Any Issues With Your Ares Double Sided Flexible O2 Sensor Wrench, Simply Contact Customer Service For Troubleshooting Help, Parts, Replacement, Or Refund..
Design: Constructed Of Premium Chrome Vanadium Steel, This Sturdy Wrench Also Features A Chrome Plated Handle And Black Phosphate Socket Head That Offer Enhanced Durability And Greater Corrosion Resistance. The Double Knurled Handle Offers Better Grip And Control Than An Untextured Handle, Making It Easier Than Ever To Remove And Install Oxygen Sensors..

Brand: ARES   |   Manufacturer: ARES

Dimensions: 1.38 x 10.43 x 2.56 inches

Warranty: Performance Assurance

Amazon Price: $26.02 | as of 05/02/2024 (2:20pm pst) *DETAILS
Availability: In Stock

See On Amazon




  #12

8MILELAKE 7pcs O2 Oxygen Sensor Socket Set 7/8", Oil Pressure Sending Unit Master Sensor Socket Tool Kit Universal Puller and Removal Tool

Asin: B01MDNDDQP   |   Model: Socket   |   PartNumber: Socket   |   Ean: 0614019645352   |   UPC: 614019645352

Features

  • APPLICATION --- The oxygen sensor socket set designed for the removal and installation of oxygen sensors, oil pressure switch, thermal sensor switch, and brake light switch on the vehicle.
  • HIGH QUALITY --- Oil pressure sending unit master sensor socket is made of chrome-vanadium steel (CR-V) for extra strength and longevity, finished with black oxide to avoid rust.
  • SIZE --- Oxygen sensor socket kit includes 22mm (7/8 ), 27mm, and 29mm, fit with 3/8-inch and 1/2-inch ratchet drivers or extensions, the side cutout sections allow the sockets to fit over wiring harness and prevent damage to wires
  • PACKAGE --- comes with a plastic carry case for easy storage, organization and carrying away.
  • SERVICE --- 100% satisfaction guarantee, if there is any question, please feel free to let us know.
  • See more on Amazon...

Size --- Oxygen Sensor Socket Kit Includes 22Mm (7/8”), 27Mm, And 29Mm, Fit With 3/8-Inch And 1/2-Inch Ratchet Drivers Or Extensions, The Side Cutout Sections Allow The Sockets To Fit Over Wiring Harness And Prevent Damage To Wires.
Service --- 100% Satisfaction Guarantee, If There Is Any Question, Please Feel Free To Let Us Know..
Package --- Comes With A Plastic Carry Case For Easy Storage, Organization And Carrying Away..
High Quality --- Oil Pressure Sending Unit Master Sensor Socket Is Made Of Chrome-Vanadium Steel (Cr-V) For Extra Strength And Longevity, Finished With Black Oxide To Avoid Rust..

Brand: 8MILELAKE   |   Manufacturer: freebirdtrading

Dimensions: 8.70 x 10.70 x 2.30 inches   |   Weight: 4.41 pounds

Amazon Price: $27.99 | as of 05/02/2024 (2:20pm pst) *DETAILS
Availability: In Stock

See On Amazon




  #13

7 Pcs Oxygen Sensor Socket 22mm (7/8 in), 27mm, 29mm fits All Vehicle O2 Removal and Installation Universal Puller and Removal Tool

Asin: B0C86JMH39

Features

  • 7mm slot, 7/8 (22mm) x 6-point x 3-1/10 (80mm) length, 3/8 inch square drive for use with ratchet. Fits all standard oxygen sensors with a 7/8 hexagon nut.
  • The socket is slotted so that you can remove the oxygen sensor while still connected to the wiring harness, and the socket is offset and compact, providing additional leverage even in hard-to-reach spots. This quality tool can save your knuckles and time
  • This socket made from premium Chrome Molybdenum steel, the socket allows users to exert maximum torque while the precision casting ensures accurate fit and function.
  • Even if you don't have a lot of experience working with cars, you can replace your O2 sensor with this tool to help with your car's emissions and gas mileage. The sensors live in the harshest of environments and may require some elbow grease to remove, but this quality tool can save your knuckles and save you time!
  • If you have any questions, contact with us, we will reply you in 24 hours and offer the solve way for you.
  • See more on Amazon...

This Socket Made From Premium Chrome Molybdenum Steel, The Socket Allows Users To Exert Maximum Torque While The Precision Casting Ensures Accurate Fit And Function..
If You Have Any Questions, Contact With Us, We Will Reply You In 24 Hours And Offer The Solve Way For You..
Even If You Don't Have A Lot Of Experience Working With Cars, You Can Replace Your O2 Sensor With This Tool To Help With Your Car's Emissions And Gas Mileage. The Sensors Live In The Harshest Of Environments And May Require Some Elbow Grease To Remove, But This Quality Tool Can Save Your Knuckles And Save You Time!.
The Socket Is Slotted So That You Can Remove The Oxygen Sensor While Still Connected To The Wiring Harness, And The Socket Is Offset And Compact, Providing Additional Leverage Even In Hard-To-Reach Spots. This Quality Tool Can Save Your Knuckles And Time!.

Brand: YCT   |   Manufacturer: YCT AUTO

Amazon Price: $31.99 | as of 05/02/2024 (2:20pm pst) *DETAILS
Availability: In Stock

See On Amazon




  #14

VCT O2 Oxygen Sensor Flexible Double Sided Head Wrench Removes & Installs Auto Tools

Asin: B07FB1W64M   |   Model: 13   |   PartNumber: 13   |   Ean: 0641938024159   |   UPC: 641938024159

Features

  • * For use the most all oxygen sensors no matter what size electrical connectors they have
  • * Double-sided design, 12-point configuration on one side and 6-point on the opposite side
  • * 12-point side enables twice the number of clock angle attachment positions allowing oxygen sensor removal in difficult areas
  • * 6-point side for those stubborn sensors
  • * Pivoting handle design allows positive leverage in confined areas
  • See more on Amazon...

* 12-Point Side Enables Twice The Number Of "Clock Angle" Attachment Positions Allowing Oxygen Sensor Removal In Difficult Areas.
* Pivoting Handle Design Allows Positive Leverage In Confined Areas.
* 6-Point Side For Those Stubborn Sensors.
* Double-Sided Design, 12-Point Configuration On One Side And 6-Point On The Opposite Side.

Brand: VCT   |   Manufacturer: J&R Quality Tools

Dimensions: 3.00 x 12.00 x 3.00 Inches

Amazon Price: $18.95 | as of 05/02/2024 (2:20pm pst) *DETAILS
Availability: In Stock

See On Amazon




  #15

WYNNsky Oxygen Sensor & Oil Pressure Sending Unit, Master Sensor Socket Set, 7 Pieces

Asin: B08T15FL47

Features

  • Application: This socket set is designed for the removal inspection or replacement of heated and non-heated oxygen sensors fitted to the following vehicle Audi, BMW, Citroen, Mercedes, Peugeot, Renault, Skoda. These sockets feature cut-away sections allow some sockets to fit over wiring harnesses, complete with the black phosphate finish for a durable design.
  • 3/8 Drive 7/8 1/2 Oxygen Sensor Socket/Vacuum Switch Socket removes and installs vacuum switch with a 7/8 hex and some oxygen sensors; 3/8 Drive 7/8 3-1/8 oxygen sensor socket removes and installs oxygen sensors in domestic and many import vehicles. Slot in socket for wire clearance.
  • 1/2 Drive 1-3/16 3-1/2 vacuum switch socket removes oil pressure sending units on late 80 s to mid 90 s GM models; 1/2 Drive 1-1/16 3-1/4 thermal sensor switch socket removes and installs thermal sensor switch on 1973-1977 CM vehicles; 3/8 Drive 1 and 1-1/16 3 remove oil pressure sending units. Deep design fits switches up to 2-5/8 .
  • 1/2 drive 7/8 2 heated oxygen sensor sockets slot in socket accommodates connectors on heated oxygen sensors; 3/8 Drive 7/8 1-1/4 low profile design for use in tight spaces.
  • This set includes 1-1/16 and 1 in. oil Pressure sending unit socket, 3/8 in. drive, 1-3/16 in. Oil pressure sending unit socket, 1/2 in. drive, 1-1/16 in. thermal sensor switch socket, 1/2 in. drive. 7/8 in. heated oxygen sensor socket, 1/2 in. drive, 7/8 in. low profile offset oxygen sensor socket, 3/8 in. drive, 7/8 in. oxygen sensor socket, 3/8 in. drive, 7/8 in. universal vacuum PVS, TVS Valve and oxygen sensor socket, 3/8 in. drive.
  • See more on Amazon...

1/2’’ Drive ×1-3/16’’ ×3-1/2’’ Vacuum Switch Socket Removes Oil Pressure Sending Units On Late 80’S To Mid 90’S Gm Models; 1/2’’ Drive ×1-1/16’’ × 3-1/4’’ Thermal Sensor Switch Socket Removes And Installs Thermal Sensor Switch On 1973-1977 Cm Vehicles; 3/8’’ Drive ×1’’ And 1-1/16’’ ×3’’ Remove Oil Pressure Sending Units. Deep Design Fits Switches Up To 2-5/8’’..
This Set Includes 1-1/16 And 1 In. Oil Pressure Sending Unit Socket, 3/8 In. Drive, 1-3/16 In. Oil Pressure Sending Unit Socket, 1/2 In. Drive, 1-1/16 In. Thermal Sensor Switch Socket, 1/2 In. Drive. 7/8 In. Heated Oxygen Sensor Socket, 1/2 In. Drive, 7/8 In. Low Profile Offset Oxygen Sensor Socket, 3/8 In. Drive, 7/8 In. Oxygen Sensor Socket, 3/8 In. Drive, 7/8 In. Universal Vacuum Pvs, Tvs Valve And Oxygen Sensor Socket, 3/8 In. Drive..
1/2’’ Drive ×7/8’’ ×2’’ Heated Oxygen Sensor Sockets Slot In Socket Accommodates Connectors On Heated Oxygen Sensors; 3/8’’ Drive × 7/8’’ ×1-1/4’’ Low Profile Design For Use In Tight Spaces..
3/8’’ Drive × 7/8’’ ×1/2’’ Oxygen Sensor Socket/Vacuum Switch Socket Removes And Installs Vacuum Switch With A 7/8’’ Hex And Some Oxygen Sensors; 3/8’’ Drive × 7/8’’ × 3-1/8‘’ Oxygen Sensor Socket Removes And Installs Oxygen Sensors In Domestic And Many Import Vehicles. Slot In Socket For Wire Clearance..

Brand: WYNNsky   |   Manufacturer: WYNNsky

Dimensions: 2.00 x 10.00 x 8.00 Inches

Amazon Price: $30.99 | as of 05/02/2024 (2:20pm pst) *DETAILS
Availability: In Stock
Used Price: $29.44

See On Amazon




  #16

8MILELAKE 3 Pc Auto O2 Oxygen Sensor Wrench 6 Point Sensor Socket Wrench Tool

Asin: B01DP2IZQ0   |   Model: SZ6809   |   PartNumber: SZ6809   |   Ean: 7131405482405, 0700425113452   |   UPC: 700425113452

Features

  • Used for removing and installing oxygen sensors in many vehicles that are 7/8inches / 22mm in size
  • 2pcs CR-MO Steel 6 Point Sockets
  • 1pcs CR-V Steel 6 Point Socket
  • Applications: Remove and install oxygen sensors and hex vacuum switches on vehicles
  • 3/8 & 1/2-inch Drive O2 Oxygen Sensor Wrench Socket Tool. Professional Grade Removal Tool for Cars & Automotive
  • See more on Amazon...

1Pcs Cr-V Steel 6 Point Socket.
3/8 & 1/2-Inch Drive O2 Oxygen Sensor Wrench Socket Tool. Professional Grade Removal Tool For Cars & Automotive.
Applications: Remove And Install Oxygen Sensors And Hex Vacuum Switches On Vehicles.
2Pcs Cr-Mo Steel 6 Point Sockets.

Brand: 8MILELAKE   |   Manufacturer: freebirdtrading

Weight: 1.52 pounds

Amazon Price: $13.99 | as of 05/02/2024 (2:20pm pst) *DETAILS
Availability: In Stock
Used Price: $11.89

See On Amazon




  #17

weyleity Automotive Oxygen Sensor Socket Set | 5 Pcs Offset Wrench Remover and Thread Chaser Kit for O2 Sensors

Asin: B0CR5VJB9P   |   Model: MSP-1222-01   |   PartNumber: MSP-1222-01

Features

  • Special Design Crafted with a slotted design and low profile, our Oxygen Sensor Socket Wrench Set ensures hassle-free removal even with the wiring harness connected. The offset and compact socket design provides additional leverage, making it a versatile tool during oxygen sensor replacement.
  • Premium Quality Constructed from high-performance chrome molybdenum and solid cast steel, our socket wrench set guarantees strength and durability. The black oxide finish not only adds a sleek look but also serves as a protective layer against rust, ensuring a long-lasting tool life.
  • Easy to Use Designed for use with ratchets and breaker bars, this set simplifies the process of removing and installing oxygen sensors and hex vacuum switches on vehicles. Whether you're a seasoned mechanic or a novice, this high-quality tool set saves you time and effort, making it an essential addition to your toolbox.
  • Package Content The comprehensive set includes a 3/8 Dr. extra deep broach socket, a low-profile crowfoot socket wrench, an offset crowfoot socket wrench, and two thread chasers (M18 x 1.5mm and M12 x 1.25mm) with a 3/8 drive. All components come neatly organized in a sturdy case for convenient storage and transportation.
  • Functionality Precision in action! Our Oxygen Sensor Socket Wrench Set swiftly tackles O2 sensor removal, a vital tool for car enthusiasts. Versatile 5-piece kit suits pros or novices, making oxygen sensor maintenance a breeze. Elevate your toolbox with efficiency!
  • See more on Amazon...

【Easy To Use】Designed For Use With Ratchets And Breaker Bars, This Set Simplifies The Process Of Removing And Installing Oxygen Sensors And Hex Vacuum Switches On Vehicles. Whether You're A Seasoned Mechanic Or A Novice, This High-Quality Tool Set Saves You Time And Effort, Making It An Essential Addition To Your Toolbox..
【Functionality】Precision In Action! Our Oxygen Sensor Socket Wrench Set Swiftly Tackles O2 Sensor Removal, A Vital Tool For Car Enthusiasts. Versatile 5-Piece Kit Suits Pros Or Novices, Making Oxygen Sensor Maintenance A Breeze. Elevate Your Toolbox With Efficiency!.
【Package Content】The Comprehensive Set Includes A 3/8” Dr. Extra Deep Broach Socket, A Low-Profile Crowfoot Socket Wrench, An Offset Crowfoot Socket Wrench, And Two Thread Chasers (M18 X 1.5Mm And M12 X 1.25Mm) With A 3/8” Drive. All Components Come Neatly Organized In A Sturdy Case For Convenient Storage And Transportation..
【Premium Quality】Constructed From High-Performance Chrome Molybdenum And Solid Cast Steel, Our Socket Wrench Set Guarantees Strength And Durability. The Black Oxide Finish Not Only Adds A Sleek Look But Also Serves As A Protective Layer Against Rust, Ensuring A Long-Lasting Tool Life..

Brand: weyleity   |   Manufacturer: weyleity

Warranty: 6 month warranty

Amazon Price: $16.99 | as of 05/02/2024 (2:20pm pst) *DETAILS
Availability: In Stock

See On Amazon




  #18

Prokomon 5 PCS Automotive O2 Oxygen Sensor Socket Offset Wrench Remover Tool and Thread Chaser Tool

Asin: B086VXYMMM   |   Model: PT1205M   |   PartNumber: PT1205M   |   Ean: 0741663699285   |   UPC: 741663699285

Features

  • Design --- The Oxygen Sensor Set, low profile and slotted design allows you to keep the harness connected while removing the oxygen sensor, and the socket is offset and compact for extra leverage even in hard-to-reach places
  • Material --- Made of high performance chromium-molybdenum and solid cast steel construction for strength and durability - Treated with black oxide to prevent rusting
  • How to Use --- Designed for use with ratchet and breaker bar, you can remove and install oxygen sensor and hex vacuum switch on your vehicle even if you don't have extensive experience in auto repair
  • Package --- 1-pc 3/8 Dr. extra deep broach socket (3-1/8 long), 1-pc 3/8 Dr. low-profile crowfoot socket wrench (1-1/4 long), 1-pc 1/2 Dr. offset crowfoot socket wrench (1-15/16 long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8 drive to clean and repair damaged threads
  • Prokomon --- We pursue excellent quality and professional technical support. If you are not satisfied with this product or have any questions, please feel free to let us know
  • See more on Amazon...

◇ How To Use --- Designed For Use With Ratchet And Breaker Bar, You Can Remove And Install Oxygen Sensor And Hex Vacuum Switch On Your Vehicle Even If You Don't Have Extensive Experience In Auto Repair.
◇ Prokomon --- We Pursue Excellent Quality And Professional Technical Support. If You Are Not Satisfied With This Product Or Have Any Questions, Please Feel Free To Let Us Know.
◇ Package --- 1-Pc 3/8” Dr. Extra Deep Broach Socket (3-1/8” Long), 1-Pc 3/8” Dr. Low-Profile Crowfoot Socket Wrench (1-1/4” Long), 1-Pc 1/2” Dr. Offset Crowfoot Socket Wrench (1-15/16” Long), 1-Pc M18 X 1.5Mm And 1-Pc M12 X 1.25Mm Thread Chasers With 3/8” Drive To Clean And Repair Damaged Threads.
◇ Material --- Made Of High Performance Chromium-Molybdenum And Solid Cast Steel Construction For Strength And Durability - Treated With Black Oxide To Prevent Rusting.

Brand: Prokomon   |   Manufacturer: Prokomon

Warranty: one month

Amazon Price: $17.99 | as of 05/02/2024 (2:20pm pst) *DETAILS
Availability: In Stock
List Price: $18.99

See On Amazon




  #19

KUNTEC 10 Piece Oxygen Sensor Socket Set Oxygen Sensor Removal Tool Set 1/2inch and 3/8inch Square Drive

Asin: B08CKBVDFV   |   Ean: 0617256012901   |   UPC: 617256012901

Features

  • O2 sensor socket set lets you quickly and easily remove oxygen sensors, oil pressure sending unit, fuel injectors, and vacuum switches
  • Oxygen Sensor Socket Set removes and installs parts on most domestic and some international vehicles
  • Oxygen sensor remover set features 3/8-inch or 1/2-inch square drive to fit your O2 sensor wrench drives; For use with ratchet, breaker bar, or hand wrench (driver tools not included)
  • Heat-treated Chrome Vanadium And Chrome Molybdenum Steel With Black Oxide Finish for strength, durability, and longevity
  • Socket Size: 7/8 x 3-1/8 Long 3/8 Square Drive; 1 & 1-1/16 Dual Opening x 2-7/8 Long 3/8 Square Drive;7/8 x 3-1/2 Long 3/8 Square Drive; 7/8 x 3-1/2 Long Square Drive; 7/8 x 1-3/16 Long 3/8 Square Drive; 7/8 x 1-7/8 Long 1/2 Square Drive
  • See more on Amazon...

Oxygen Sensor Remover Set Features 3/8-Inch Or 1/2-Inch Square Drive To Fit Your O2 Sensor Wrench Drives; For Use With Ratchet, Breaker Bar, Or Hand Wrench (Driver Tools Not Included).
Socket Size: 7/8" X 3-1/8" Long 3/8" Square Drive; 1 & 1-1/16" Dual Opening X 2-7/8" Long 3/8" Square Drive;7/8" X 3-1/2" Long 3/8" Square Drive; 7/8" X 3-1/2" Long Square Drive; 7/8" X 1-3/16" Long 3/8" Square Drive; 7/8" X 1-7/8" Long 1/2" Square Drive.
Heat-Treated Chrome Vanadium And Chrome Molybdenum Steel With Black Oxide Finish For Strength, Durability, And Longevity.
Oxygen Sensor Socket Set Removes And Installs Parts On Most Domestic And Some International Vehicles.

Brand: KUNTEC   |   Manufacturer: kuangchen

Dimensions: 10.24 x 9.45 x 1.57 inches

Amazon Price: $38.59 | as of 05/02/2024 (2:20pm pst) *DETAILS
Availability: In Stock

See On Amazon




  #20

Ladnum Offset Oxygen Sensor Socket, 3/8Inch Drive Includes Oxygen Sensing Removal Tool, 7/8 in (22 mm), Wire Gate Accesses Sensor from Side, Universal for Most Cars

Asin: B0CL5X16KG

Features

  • MATERIAL: This offset oxygen sensor socket is made of high quality chrome molybdenum steel, which is rust-resistant and durable, this socket allows the user to apply maximum torque to ensure precise assembly and function.
  • DESIGN: The socket is slotted so you can remove the oxygen sensor while still connected to the wiring harness, and the socket is offset and compact to provide extra leverage even in hard-to-reach places.
  • Features:Even if you don't have extensive automotive repair experience, you can use this tool to replace the oxygen sensor to help improve your car's emissions and gas mileage.
  • SIZE: Driver size: 3/8 (10mm), socket size 7/8 (22mm), easy to use with any 3/8 ratchet or breaker bar.
  • AFTER-SALES SERVICE: If you have any questions about our products, please contact us in time, we will reply you within 24 hours.
  • See more on Amazon...

Features:Even If You Don't Have Extensive Automotive Repair Experience, You Can Use This Tool To Replace The Oxygen Sensor To Help Improve Your Car's Emissions And Gas Mileage..
After-Sales Service: If You Have Any Questions About Our Products, Please Contact Us In Time, We Will Reply You Within 24 Hours..
Size: Driver Size: 3/8" (10Mm), Socket Size 7/8" (22Mm), Easy To Use With Any 3/8" Ratchet Or Breaker Bar..
Design: The Socket Is Slotted So You Can Remove The Oxygen Sensor While Still Connected To The Wiring Harness, And The Socket Is Offset And Compact To Provide Extra Leverage Even In Hard-To-Reach Places..

Brand: Ladnum   |   Manufacturer: Ladnum

Amazon Price: $6.99 | as of 05/02/2024 (2:20pm pst) *DETAILS
Availability: In Stock
List Price: $7.99

See On Amazon




  #21

BILITOOLS 11-Piece O2 Oxygen Sensor Socket Set 7/8" (22mm), 1" & 1-1/16", Offset Oxygen Sensor Wrench Set includes Oil Pressure Switch Socket, Oil Sending Unit Socket

Asin: B0C53LKY3M   |   Ean: 6974676371907

Features

  • 1/2" drive oxygen sensor sockets include: 29 mm pressure / vacuum switch oxygen sensor sockets, 1-1/16" (27 mm) oil pressure sending unit socket, 22mm special tube socket, 7/8"(22 mm) deep oxygen sensor socket, offset 7/8" (22 mm) oxygen sensor socket.
  • 3/8 drive oxygen sensor sockets include: 7/8 (22 mm) Vacuum switch & oxygen sensor socket (wide slot), 7/8 (22 mm) vacuum switch oxygen sensor socket (narrow slot), offset 7/8(22 mm) oxygen sensor socket, offset 7/8 (22 mm) oxygen sensor socket (low profile), 1&1-1/16 oil pressure sending unit socket. M18 x 1.5 oxygen sensor thread chaser tool.
  • This special automotive tool is designed for removing, inspecting, replacing, and installing ohard-to-reach oxygen sensors, oil pressure switches, oil pressure sending units, thermal sensor switches, vacuum switches, and brake light switches on most modern cars.
  • Constructed from high-performance chrome molybdenum / vanadium steel, these oxygen sensor sockets are built for strength and durability. They are finished with black phosphated coating to prevent rust.
  • These sensor sockets are compatible with 3/8-inch or 1/2-inch ratchets and breaker bars, making them ideal for removing and installing oxygen sensors on vehicles.
  • See more on Amazon...

This Special Automotive Tool Is Designed For Removing, Inspecting, Replacing, And Installing Ohard-To-Reach Oxygen Sensors, Oil Pressure Switches, Oil Pressure Sending Units, Thermal Sensor Switches, Vacuum Switches, And Brake Light Switches On Most Modern Cars..
These Sensor Sockets Are Compatible With 3/8-Inch Or 1/2-Inch Ratchets And Breaker Bars, Making Them Ideal For Removing And Installing Oxygen Sensors On Vehicles..
Constructed From High-Performance Chrome Molybdenum / Vanadium Steel, These Oxygen Sensor Sockets Are Built For Strength And Durability. They Are Finished With Black Phosphated Coating To Prevent Rust..
3/8" Drive Oxygen Sensor Sockets Include: 7/8" (22 Mm) Vacuum Switch & Oxygen Sensor Socket (Wide Slot), 7/8" (22 Mm) Vacuum Switch Oxygen Sensor Socket (Narrow Slot), Offset 7/8"(22 Mm) Oxygen Sensor Socket, Offset 7/8" (22 Mm) Oxygen Sensor Socket (Low Profile), 1"&1-1/16" Oil Pressure Sending Unit Socket. M18 X 1.5 Oxygen Sensor Thread Chaser Tool..

Brand: BILITOOLS   |   Manufacturer: BILITOOLS

Dimensions: 11.02 x 15.74 x 3.26 inches   |   Weight: 8.69 Pounds

Amazon Price: $69.99 | as of 05/02/2024 (2:20pm pst) *DETAILS
Availability: In Stock

See On Amazon




  #22

NYXOVA 5pcs Oxygen Sensor Socket, Automotive Oxygen Sensor Socket Set, Automotive O2 Oxygen Sensor Socket Offset Wrench Remover Tool and Thread Chaser Tool

Asin: B0CW163QR5   |   Model: G20240220-1   |   PartNumber: G20240220-1

Features

  • Effortless Functionality: Our oxygen sensor socket tool set is meticulously designed for compatibility with both ratchets and breaker bars, catering to individuals of all skill levels working on vehicles. The inclusion of a wrench and thread chaser set simplifies the removal and installation of oxygen sensors and hex vacuum switches, offering a time-saving solution for automotive maintenance tasks.
  • Premium Craftsmanship: Crafted from high-quality steel through precision forging, our sockets and wrenches exhibit exceptional strength, ensuring reliable performance and durability. The 5-piece oxygen sensor socket set is also engineered to resist rust and corrosion, further extending its service life and value.
  • Innovative Design: Featuring a unique side cutout design, our sockets provide convenient access to the oxygen sensor section while safeguarding wires from potential damage. The cut-out and slots allow for easy fitting over wiring harnesses, while the standard 6-point socket design ensures secure removal of oxygen sensors while preserving the integrity of the wiring harness. Additionally, the offset and compact design of the socket offer enhanced leverage, even in tight and challenging spaces.
  • Versatile Application: Our automotive oxygen sensor socket removal tool is compatible with oxygen sensors commonly found in modern vehicles, making it an ideal solution for various automotive maintenance tasks. Whether you're removing or installing oxygen sensors or vacuum switches on vehicles with computer-controlled engines, our o2 sensor socket wrench remover set has you covered.
  • Comprehensive Package: The oxygen sensor socket removal tool set includes 2 thread chasers (1pc M12 x 1.25mm, 1pc M18 x 1.5mm), 1 oxygen sensor socket (1/2 Drive x 7/8 (22mm) x 50mm long), and 2 vacuum switch sockets (1pc 3/8 Drive x 7/8 (22mm) x 30mm long, 1pc 3/8 Drive x 7/8 (22mm) x 6pt x 80mm long), providing a comprehensive solution for your automotive maintenance needs.
  • See more on Amazon...

Innovative Design: Featuring A Unique Side Cutout Design, Our Sockets Provide Convenient Access To The Oxygen Sensor Section While Safeguarding Wires From Potential Damage. The Cut-Out And Slots Allow For Easy Fitting Over Wiring Harnesses, While The Standard 6-Point Socket Design Ensures Secure Removal Of Oxygen Sensors While Preserving The Integrity Of The Wiring Harness. Additionally, The Offset And Compact Design Of The Socket Offer Enhanced Leverage, Even In Tight And Challenging Spaces..
Comprehensive Package: The Oxygen Sensor Socket Removal Tool Set Includes 2 Thread Chasers (1Pc M12 X 1.25Mm, 1Pc M18 X 1.5Mm), 1 Oxygen Sensor Socket (1/2" Drive X 7/8" (22Mm) X 50Mm Long), And 2 Vacuum Switch Sockets (1Pc 3/8" Drive X 7/8" (22Mm) X 30Mm Long, 1Pc 3/8" Drive X 7/8" (22Mm) X 6Pt X 80Mm Long), Providing A Comprehensive Solution For Your Automotive Maintenance Needs..
Versatile Application: Our Automotive Oxygen Sensor Socket Removal Tool Is Compatible With Oxygen Sensors Commonly Found In Modern Vehicles, Making It An Ideal Solution For Various Automotive Maintenance Tasks. Whether You're Removing Or Installing Oxygen Sensors Or Vacuum Switches On Vehicles With Computer-Controlled Engines, Our O2 Sensor Socket Wrench Remover Set Has You Covered..
Premium Craftsmanship: Crafted From High-Quality Steel Through Precision Forging, Our Sockets And Wrenches Exhibit Exceptional Strength, Ensuring Reliable Performance And Durability. The 5-Piece Oxygen Sensor Socket Set Is Also Engineered To Resist Rust And Corrosion, Further Extending Its Service Life And Value..

Brand: NYXOVA   |   Manufacturer: NYXOVA

Weight: 1.60 pounds

Warranty: 6 Months

Amazon Price: $16.99 | as of 05/02/2024 (2:20pm pst) *DETAILS
Availability: In Stock

See On Amazon




  #23

NOTISH 5PCS Automotive O2 Oxygen Sensor Socket Set Wrench Remover Tool and Thread Chaser Tool Set

Asin: B0CM5Q8LB7

Features

  • Include: 1PCS 3/8''Dr. extra deep broach socket (3-1/8''long); 1PCS 3/8''Dr. low-profile crowfoot socket wrench (1-1/4''long); 1PCS 1/2''Dr. offset crowfoot socket wrench (1-15/16''long); 1PCS M18 x 1.5mm and 1PCS M12 x 1.25mm thread chasers with 3/8'' drive to clean and repair damaged threads, Very convenient, Please rest assured use.
  • High Quality: This socket made from premium Chrome Molybdenum steel, The precision casting ensures accurate fit and function, Providing additional leverage even in hard-to-reach spots. Can save your knuckles and time.
  • Function: Perfect tool set for removing, Perfect tool set for inspecting, Replacing removing, and installing heated and non heated oxygen sensors and vacuum switches on most vehicles with computer-controlled engines.
  • Design: Universal socket wrenchs cover various situations of oxygen sensor location, The socket is slotted so that you can remove the oxygen sensor while still connected to the wiring harness, Prevents damage to wires. Providing extra leverage even in hard-to-reach places,
  • Service: If you have any questions about the product, you can contact us by email, We will solve you as soon as possible.
  • See more on Amazon...

Function: Perfect Tool Set For Removing, Perfect Tool Set For Inspecting, Replacing Removing, And Installing Heated And Non Heated Oxygen Sensors And Vacuum Switches On Most Vehicles With Computer-Controlled Engines..
Service: If You Have Any Questions About The Product, You Can Contact Us By Email, We Will Solve You As Soon As Possible..
Design: Universal Socket Wrenchs Cover Various Situations Of Oxygen Sensor Location, The Socket Is Slotted So That You Can Remove The Oxygen Sensor While Still Connected To The Wiring Harness, Prevents Damage To Wires. Providing Extra Leverage Even In Hard-To-Reach Places,.
High Quality: This Socket Made From Premium Chrome Molybdenum Steel, The Precision Casting Ensures Accurate Fit And Function, Providing Additional Leverage Even In Hard-To-Reach Spots. Can Save Your Knuckles And Time..

Brand: NOTISH   |   Manufacturer: NOTISH

Weight: 1.00 pounds

Amazon Price: $16.99 | as of 05/02/2024 (2:20pm pst) *DETAILS
Availability: In Stock

See On Amazon




  #24

ABN O2 Sensor Socket Wrench Flexible 6-12pt Dual Head - 02 Oxygen Sensor Socket Tool Remover 1pk Set for Install Removal

Asin: B09BZYDZTF   |   Model: ABN-815622   |   PartNumber: ABN-815622   |   Ean: 0840145815622   |   UPC: 840145815622

Features

  • [Remove Oxygen Sensors]: When adjusting an oxygen sensor in a tight spot, use the ABN Oxygen Sensor Wrench Tool; O2 sensor wrench package includes (1) O2 sensor socket wrench with 6pt socket and 12pt socket on 1 head - downstream recommended
  • [Access Difficult Spots]: Reaching O2 sensors can be difficult; Slim design with flex head of oxygen sensor socket wrench tool offers extra clearance for removal and installation of oxygen sensors positioned upward and inward of floorboard
  • [Offset Grip]: Oxygen sensor socket tool O2 socket wrench 8-inch (20cm) handle curves at 4 inches (10cm) for leverage and clearance around exhaust pipes; Flip O2 sensor tool removal handle to let curved handle fit most spaces
  • [Built to Last]: No need to worry about this sensor oxygen tool bending and breaking when you need it most; O2 tool oxygen sensor remover is constructed of cold-forged steel for added strength and longevity
  • [Get the Job Done]: No additional tools needed; We recommend adding penetrating oil on oxygen sensor to be removed and anti-seize on threads of new oxygen sensor to be installed (optional, not included)
  • See more on Amazon...

[Offset Grip]: Oxygen Sensor Socket Tool O2 Socket Wrench 8-Inch (20Cm) Handle Curves At 4 Inches (10Cm) For Leverage And Clearance Around Exhaust Pipes; Flip O2 Sensor Tool Removal Handle To Let Curved Handle Fit Most Spaces.
[Get The Job Done]: No Additional Tools Needed; We Recommend Adding Penetrating Oil On Oxygen Sensor To Be Removed And Anti-Seize On Threads Of New Oxygen Sensor To Be Installed (Optional, Not Included).
[Built To Last]: No Need To Worry About This Sensor Oxygen Tool Bending And Breaking When You Need It Most; O2 Tool Oxygen Sensor Remover Is Constructed Of Cold-Forged Steel For Added Strength And Longevity.
[Access Difficult Spots]: Reaching O2 Sensors Can Be Difficult; Slim Design With Flex Head Of Oxygen Sensor Socket Wrench Tool Offers Extra Clearance For Removal And Installation Of Oxygen Sensors Positioned Upward And Inward Of Floorboard.

Brand: ABN   |   Manufacturer: ABN

Dimensions: 1.80 x 11.10 x 1.80 Inches   |   Weight: 0.99 pounds

Amazon Price: $18.89 | as of 05/02/2024 (2:20pm pst) *DETAILS
Availability: In Stock
Used Price: $18.59

See On Amazon




  #25

CAROCK Oxygen Sensor Wrench 22mm Flexible Head O2 Sensor Wrench 7/8" Removal Install Tool

Asin: B07RT8HRR9   |   Model: 02CR-TL01001   |   PartNumber: 02CR-TL01001   |   Ean: 0680587733029   |   UPC: 680587733029

Features

  • Oxygen Sensor Wrench 22mm; O2 Sensor Wrench 7/8"
  • Flexible O2 sensor wrench works around the exhaust
  • Swivel Head helps create extra leverage in narrow area. The 22mm 7/8 oxygen sensor wrench helps to get additional clearance
  • Quickly remove and exchange difficult O2 sensors with 7/8 22 mm hex wrench
  • Fit oxygen sensor that use 7/8(22mm) hex, which is on most mid-sized trucks, SUVs and vans.
  • See more on Amazon...

Swivel Head Helps Create Extra Leverage In Narrow Area. The 22Mm 7/8" Oxygen Sensor Wrench Helps To Get Additional Clearance.
Fit Oxygen Sensor That Use 7/8"(22Mm) Hex, Which Is On Most Mid-Sized Trucks, Suvs And Vans..
Quickly Remove And Exchange Difficult O2 Sensors With 7/8" 22 Mm Hex Wrench.
Flexible O2 Sensor Wrench Works Around The Exhaust.

Brand: CAROCK   |   Manufacturer: CAROCK

Amazon Price: $19.99 | as of 05/02/2024 (2:20pm pst) *DETAILS
Availability: In Stock

See On Amazon




  #26

Lucky Seven Oxygen Sensor Socket Wrench Remover Tool and Thread Chaser Set-5 Pcs, 02 Oxygen Sensor Socket Offset Wrench Remover Tool,A7841F-FBA +Thread Chaser

Asin: B087G1JLC7   |   Model: A7841F-FBA   |   PartNumber: A7841F-FBA   |   Ean: 0782932047130   |   UPC: 782932047130

Features

  • Oxygen Sensor Socket Wrench Including: 1-pc 3/8 Dr. extra deep broach socket (3-1/8 long), 1-pc 3/8 Dr. low-profile crowfoot socket wrench (1-1/4 long), 1-pc 1/2 Dr. offset crowfoot socket wrench (1-15/16 long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8 drive to clean and repair damaged threads
  • Oxygen Sensor Socket Wrench Set Special side cutout design allows easy access to oxygen sensors from any section and prevents damage to wires Perfect tool set for removing, inspecting, replacing and installing heated and non heated oxygen sensors and vacuum switches on most vehicles with computer-controlled engines.
  • 5 Pcs Oxygen Sensor Switch Socket Wrench Kit and Thread Chaser Set-3 types of universal socket wrenchs cover various situations of oxygen sensor location,6-point 7/8 (22mm) socket opening fits all hexagon oxygen sensor, common 3/8 and 1/2 drive ends can be used with ratchet or breaker bar.
  • Oxygen Sensor Socket Wrench kit-Including 3 oxygen sensor sockets and 2 thread chasers for cleaning and repairing damaged threads,oem oxygen sensor wrench socket,oxygen sensor wrench socket,o2 oxygen sensor socket wrench,o2 sensor socket wrench,oxygen sensor wrench set,oxygen sensor wrench tool,oxygen sensor wrench kit,oxygen sensor wrench 1/2 drive,oxygen sensor wrench socket.
  • Automotive oxygen sensor removers,the items are the same as the pictures.We provide carefree return, Our aim at pursuing the maximum satisfaction of our buyers!oxygen sensor wrench set,o2 sensor socket wrench,oxygen sensor crows foot socket,oxygen sensor socket.Automotive Replacement Parts Switches & Relays Relays Oxygen Sensor
  • See more on Amazon...

5 Pcs Oxygen Sensor Switch Socket Wrench Kit And Thread Chaser Set-3 Types Of Universal Socket Wrenchs Cover Various Situations Of Oxygen Sensor Location,6-Point 7/8” (22Mm) Socket Opening Fits All Hexagon Oxygen Sensor, Common 3/8” And 1/2” Drive Ends Can Be Used With Ratchet Or Breaker Bar..
Automotive Oxygen Sensor Removers,The Items Are The Same As The Pictures.We Provide Carefree Return, Our Aim At Pursuing The Maximum Satisfaction Of Our Buyers!Oxygen Sensor Wrench Set,O2 Sensor Socket Wrench,Oxygen Sensor Crows Foot Socket,Oxygen Sensor Socket.Automotive›Replacement Parts›Switches & Relays›Relays›Oxygen Sensor.
Oxygen Sensor Socket Wrench Kit-Including 3 Oxygen Sensor Sockets And 2 Thread Chasers For Cleaning And Repairing Damaged Threads,Oem Oxygen Sensor Wrench Socket,Oxygen Sensor Wrench Socket,O2 Oxygen Sensor Socket Wrench,O2 Sensor Socket Wrench,Oxygen Sensor Wrench Set,Oxygen Sensor Wrench Tool,Oxygen Sensor Wrench Kit,Oxygen Sensor Wrench 1/2 Drive,Oxygen Sensor Wrench Socket..
Oxygen Sensor Socket Wrench Set Special Side Cutout Design Allows Easy Access To Oxygen Sensors From Any Section And Prevents Damage To Wires,Perfect Tool Set For Removing, Inspecting, Replacing And Installing Heated And Non Heated Oxygen Sensors And Vacuum Switches On Most Vehicles With Computer-Controlled Engines..

Brand: Lucky Seven   |   Manufacturer: Lucky Seven

Dimensions: 0.40 x 3.00 x 3.00 Inches

Amazon Price: $20.39 | as of 05/02/2024 (2:20pm pst) *DETAILS
Availability: In Stock

See On Amazon




  #27

5 PCS Automotive Oxygen Sensor Socket Wrench Removal Tool and Thread Chaser Set (Blue Case)

Asin: B08Q36FZH3   |   Model: oxygen sensor socket   |   PartNumber: oxygen sensor socket

Features

  • Design Standard 6 point with low profile and slotted design to enable you remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots.
  • Package 1-pc 3/8 Dr. extra deep broach socket (3-1/8 long), 1-pc 3/8 Dr. low-profile crowfoot socket wrench (1-1/4 long), 1-pc 1/2 Dr. offset crowfoot socket wrench (1-15/16 long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8 drive to clean and repair damaged threads
  • USE Built for use with ratchets and breakers bars to remove and install oxygen sensors and hex vacuum switches on vehicle, even if you don't have a lot of experience working with cars. This high quality tool can save your time!
  • Material Made from high performance chrome molybdenum and solid cast steel construction for strength and durability - Finished with Black Oxide to prevent rust.
  • Service 100% satisfaction guarantee, If you have any issues with the Oxygen Sensor Socket Wrench and Thread Chaser Set, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you.
  • See more on Amazon...

【Use】 Built For Use With Ratchets And Breakers Bars To Remove And Install Oxygen Sensors And Hex Vacuum Switches On Vehicle, Even If You Don't Have A Lot Of Experience Working With Cars. This High Quality Tool Can Save Your Time!.
【Service】100% Satisfaction Guarantee, If You Have Any Issues With The Oxygen Sensor Socket Wrench And Thread Chaser Set, Simply Contact Customer Service For Troubleshooting Help, Parts, Replacement, Or Refund. Our Aim Is To Make You Satisfy The Parts And The Service We Provide For You..
【Material】 Made From High Performance Chrome Molybdenum And Solid Cast Steel Construction For Strength And Durability - Finished With Black Oxide To Prevent Rust..
【Package】1-Pc 3/8” Dr. Extra Deep Broach Socket (3-1/8” Long), 1-Pc 3/8” Dr. Low-Profile Crowfoot Socket Wrench (1-1/4” Long), 1-Pc 1/2” Dr. Offset Crowfoot Socket Wrench (1-15/16” Long), 1-Pc M18 X 1.5Mm And 1-Pc M12 X 1.25Mm Thread Chasers With 3/8” Drive To Clean And Repair Damaged Threads.

Brand: A ABIGAIL   |   Manufacturer: A ABIGAIL

Warranty: 1 Year

Amazon Price: $19.99 | as of 05/02/2024 (2:20pm pst) *DETAILS
Availability: In Stock

See On Amazon




  #28

Oxygen Sensor Socket with Side Wire Cutout 3/8 Inch Drive x 7/8 (22mm) fits All Vehicle O2 Removal and Installation Offset Oxygen Sensor Socket

Asin: B07RLVDR7T   |   Model: 13   |   PartNumber: 13

Features

  • Quality- Constructed with drop forged heat-treated chrome-vanadium steel (CR-V) for strength and longevity; Black phosphate finish for corrosion resistance.
  • Size- Fits standard oxygen sensors with a 7/8 hexagon nut; 7mm slot, 7/8 (22mm) x 6-point x 3-1/10 (80mm) length, 3/8 inch square drive for use with ratchet.
  • Design- The size of the open side is 8 mm, the length: 80mm, Side cutout prevents damage to wires
  • 100% Brand new and Never used. This part Is guarantee By Factory Warranty
  • Warranty: We offer 30 days free return and 365 days free warranty. Please feel free to let us know if you need any assists.
  • See more on Amazon...

Design- The Size Of The Open Side Is 8 Mm, The Length: 80Mm, Side Cutout Prevents Damage To Wires.
Warranty: We Offer 30 Days Free Return And 365 Days Free Warranty. Please Feel Free To Let Us Know If You Need Any Assists..
100% Brand New And Never Used. This Part Is Guarantee By Factory Warranty.
Size- Fits Standard Oxygen Sensors With A 7/8” Hexagon Nut; 7Mm Slot, 7/8” (22Mm) X 6-Point X 3-1/10” (80Mm) Length, 3/8 Inch Square Drive For Use With Ratchet..

Brand: Apeixoto   |   Manufacturer: Apeixoto

Amazon Price: $8.99 | as of 05/02/2024 (2:20pm pst) *DETAILS
Availability: In Stock

See On Amazon




  #29

8MILELAKE 5pcs O2 Oxygen Sensor Socket Set, 22mm Oxygen Sensor Socket Offset Wrench Remover Tool and Thread Chaser Set

Asin: B01JIFVVYG   |   Model: SZ7803   |   PartNumber: SZ7803   |   Ean: 0614019644676   |   UPC: 614019644676

Features

  • Usage The o2 oxygen sensor socket set is used to remove, install and check the oxygen sensors and hexagon vacuum switches of the vehicle. The thread chasers in the set can be used to clean and repair damaged threads.
  • Professional Design The cut-out and slot design of the automotive oxygen sensor socket wrench remover tool kit enables the socket to be installed on the connected wiring harness, which is convenient for operation and prevents damage to the wire.
  • Kit Includes The o2 oxygen sensor socket offset wrench remover set contains 1 pc 3/8 Dr. extra deep broach socket, 1 pc 3/8 Dr. low-profile crowfoot socket wrench, 1 pc 1/2 Dr. offset crowfoot socket wrench, 1 pc M18 x 1.5mm and 1 pc M12 x 1.25mm thread chasers with 3/8 drive, and a carry case is included for easy storage and organization.
  • High Quality Materials The oxygen sensor socket wrench remover tool and thread chaser set is made of high-quality materials and is durable. The surface is coated with black oxide to prevent rust.
  • Service Guarantee High quality products and services have always been our purpose. If you encounter any problems in the process of purchase or use, please contact us to help you.
  • See more on Amazon...

【Kit Includes】The O2 Oxygen Sensor Socket Offset Wrench Remover Set Contains 1 Pc 3/8" Dr. Extra Deep Broach Socket, 1 Pc 3/8" Dr. Low-Profile Crowfoot Socket Wrench, 1 Pc 1/2" Dr. Offset Crowfoot Socket Wrench, 1 Pc M18 X 1.5Mm And 1 Pc M12 X 1.25Mm Thread Chasers With 3/8" Drive, And A Carry Case Is Included For Easy Storage And Organization..
【Service Guarantee】High Quality Products And Services Have Always Been Our Purpose. If You Encounter Any Problems In The Process Of Purchase Or Use, Please Contact Us To Help You..
【High Quality Materials】The Oxygen Sensor Socket Wrench Remover Tool And Thread Chaser Set Is Made Of High-Quality Materials And Is Durable. The Surface Is Coated With Black Oxide To Prevent Rust..
【Professional Design】The Cut-Out And Slot Design Of The Automotive Oxygen Sensor Socket Wrench Remover Tool Kit Enables The Socket To Be Installed On The Connected Wiring Harness, Which Is Convenient For Operation And Prevents Damage To The Wire..

Brand: 8MILELAKE   |   Manufacturer: freebirdtrading

Dimensions: 3.94 x 5.12 x 2.36 inches   |   Weight: 0.88 pounds

Amazon Price: $18.55 | as of 05/02/2024 (2:20pm pst) *DETAILS
Availability: In Stock

See On Amazon




  #30

7Pcs Oxygen Sensor Remover Set,3/8" & 1/2" Drive Oil Pressure Sending Unit Removal Kit O2 Sensor Socket Set

Asin: B07DYV67CD   |   Model: YT97933   |   PartNumber: YT97933   |   Ean: 0788537801443   |   UPC: 788537801443

Features

  • 7 pc sensor and sending unit socket set
  • Chrome vanadium steel construction
  • Oil rubbed Black oxide coating for corrosion resistance
  • Designed for the removal and installation of oxygen sensors, oil pressure sending units and vacuum switches equipped with wires or vacuum tubes
  • Blow mold case for storage
  • See more on Amazon...

Oil Rubbed Black Oxide Coating For Corrosion Resistance.
Blow Mold Case For Storage.
Designed For The Removal And Installation Of Oxygen Sensors, Oil Pressure Sending Units And Vacuum Switches Equipped With Wires Or Vacuum Tubes.
Chrome Vanadium Steel Construction.

Brand: DAYUAN   |   Manufacturer: Yinyuan Tools

Warranty: 1 year

Amazon Price: $27.95 | as of 05/02/2024 (2:20pm pst) *DETAILS
Availability: In Stock

See On Amazon






Looking For Something Else? Search

Televisions & Video Products


Home Audio & Theater Products


Camera & Photo


Computers


Electronics Accessories & Supplies


Cell Phones & Accessories


Video Game Consoles & Accessories


GPS Finders & Accessories


Portable Audio & Video


Wearable Technology


Audio Headphones


Security & Surveillance Equipment


Car & Vehicle Electronics


eBook Readers & Accessories


Digital Music


Office Electronics Products


Office Furniture & Lighting


Office & School Supplies


Software


Video Games


Toys & Games


Tools & Home Improvement


Garden & Outdoor


Appliances


Kitchen & Dining


Bedding


Bath Products


Furniture


Home Decor Products


Home Lighting & Ceiling Fans


Seasonal Décor


Event & Party Supplies


Heating Cooling & Air Quality


Ironing Products


Vacuum Cleaners & Floor Care


Home Storage & Organization


Household Cleaning Supplies


Kids Home Store


Luggage & Travel Gear


Wall Art


Baby


Outdoor Recreation


Sports & Fitness


Sports Fan Shop


Automotive Parts & Accessories


Pet Supplies


Beauty & Personal Care


Health Household & Baby Care


Grocery & Gourmet Food


Arts Crafts & Sewing


Collectibles & Fine Art


Handmade


Industrial & Scientific


CDs & Vinyl


Musical Instruments


Kindle Store


Clothing Shoes & Accessories


Gift Cards



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.
As an Amazon Associate we earn from qualifying purchases.