Best Replacement Cell Phone Backs - Buying Guide
Last Updated: 05/02/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
3M Sticky Adhesive Replacement Parts for Pops Socket Base, 6pcs 1.38 Circle Double Sided Tape for Collapsible Grip Stand's Back, 2pcs VHB Sticker Pads for Car Socket Mount & Cell Phone Magnetic Holder
Asin: B07JBBMZNJ | Ean: 0607569681710 | UPC: 607569681710
Features
- DESIGNED FOR COLLAPSIBLE GRIP & CAR MOUNT: This backup replacement two sided sticker patch kit is designed to better reuse swappable expanding phone grips stand and replace dash magnet car mount's back; 6pcs high bond larger round vhb dots for the bases of collapsible socket mount, 2pcs smaller circles discs strips for the back of magnetic car holder. Great removable magic phone caps cover skin stickies tabs accessory ring glue stuff part for glass, boys, girls, man,woman.
- 6 PIECES BIG ADHESIVE STICKERS: 6 pack bigger circular replacement very high bond adhesive is exclusively designed to re-stick phone collapsible grip stand and finger ring phone holder sticky. These new mounting tapes adopt top 3M VHB super strong black gel, stickiness is 40% stronger than inital original one, high temperature and low temperature resistance, no problem using in hot Summer when you driving car, truck, vehicle, uber in florida etc.
- 2 PIECES MAGNETIC PHONE CAR MOUNT ADHESIVE PADS: Two small circle 3M double sided tape tiny foam refill adhesive disk work with the bottom of dashboard car mount, 360 magnetic car mount, dash cam mount holder, wall phone holder, wireless charger mount, windshield gps navigation mount, iphone car mount, cell phone holder, collapsible phone grip car mount etc. Please clear the mounting surface with universal alcohol prep pad before stick.
- IMPORTANT NOTE: Here are some problem customer may encountered frequently. 1. Hard to peel off the red backing film, in this situation, please repeat this act: peel-if come up-press red film back-peel again. 2. Adhesive rubber can't stick well on phone case, please don't not stick adhesion on rugged, texture surface silicone phone case, it may not stick well. 3. Last but the most important rule, wait 24 hours after stuck. 4. Please contact us immediately if you have any problems, we are here.
- volport product comes with 12-months warranty, if you have any question, please contact us. WIDE APPLICATIONS: These 3M adhesive accessories set can be used at home bathroom mirror, refrigerator, bed post, wall, locker, office, ceiling, cooking kitchen, window, cabinet, bedside, desk, dash, windshield, steering wheel, cars badge, shower room, nightstand, boat, rough wood etc. Compatible with phone case all Smartphone, iPhone 14 plus 13 12 pro max mini, Samsung Galaxy, lg, Tablet, etc.
- See more on Amazon...
2 Pieces Magnetic Phone Car Mount Adhesive Pads: Two Small Circle 3M Double Sided Tape Tiny Foam Refill Adhesive Disk Work With The Bottom Of Dashboard Car Mount, 360 Magnetic Car Mount, Dash Cam Mount Holder, Wall Phone Holder, Wireless Charger Mount, Windshield Gps Navigation Mount, Iphone Car Mount, Cell Phone Holder, Collapsible Phone Grip Car Mount Etc. Please Clear The Mounting Surface With Universal Alcohol Prep Pad Before Stick..
Volport Product Comes With 12-Months Warranty, If You Have Any Question, Please Contact Us. Wide Applications: These 3M Adhesive Accessories Set Can Be Used At Home Bathroom Mirror, Refrigerator, Bed Post, Wall, Locker, Office, Ceiling, Cooking Kitchen, Window, Cabinet, Bedside, Desk, Dash, Windshield, Steering Wheel, Cars Badge, Shower Room, Nightstand, Boat, Rough Wood Etc. Compatible With Phone Case All Smartphone, Iphone 14 Plus 13 12 Pro Max Mini, Samsung Galaxy, Lg, Tablet, Etc..
Important Note: Here Are Some Problem Customer May Encountered Frequently. 1. Hard To Peel Off The Red Backing Film, In This Situation, Please Repeat This Act: Peel-If Come Up-Press Red Film Back-Peel Again. 2. Adhesive Rubber Can't Stick Well On Phone Case, Please Don't Not Stick Adhesion On Rugged, Texture Surface Silicone Phone Case, It May Not Stick Well. 3. Last But The Most Important Rule, Wait 24 Hours After Stuck. 4. Please Contact Us Immediately If You Have Any Problems, We Are Here..
6 Pieces Big Adhesive Stickers: 6 Pack Bigger Circular Replacement Very High Bond Adhesive Is Exclusively Designed To Re-Stick Phone Collapsible Grip Stand And Finger Ring Phone Holder Sticky. These New Mounting Tapes Adopt Top 3M Vhb Super Strong Black Gel, Stickiness Is 40% Stronger Than Inital Original One, High Temperature And Low Temperature Resistance, No Problem Using In Hot Summer When You Driving Car, Truck, Vehicle, Uber In Florida Etc..
Brand: volport | Manufacturer: volport
Dimensions: 1.38 x 0.00 x 1.38 Inches
See On Amazon #2
Perzework OEM Rear Back Glass Replacement (Pacific Blue) Compatible with iPhone 12 pro max 6.7 inches All Carriers with Pre-Installed Adhesive and Repairing Tool Kits
Asin: B09T9J541J
Features
- Brand New and Real Glass OEM Back Glass Replacement (Blue) Compatible with iPhone 12 pro max 6.7 inches.Tested one by one by professional technicist before shipping. This replacement back door will repair your cracked, damaged, scratched phone. Restore the device back to new.
- Bigger camera hole No need to remove the camera lens as the new back glass is with a bigger camera hole. You can install the new back glass replacement directly after removing the old broken glass. It is much easier for you.
- Easy Installation 3M waterproof adhesive are pre-installed. The instruction manual is included,and there are also many guides are available on YouTube.
- Comes with Full Set Toolkit It comes with a full set professional repair toolkit. It is much easier for you to remove the broken back glass.Please note that you need to prepare a hair dryer,becasuse the original adhesive is very strong.
- Risk-Free Shopping and Quality Warranty one year warranty for this back glass cover replacement. We can send a new rear back glass or full refund if you are not 100% satisfied with our products .Please feel free to contact us if you have any questions.
- See more on Amazon...
【Easy Installation】3M Waterproof Adhesive Are Pre-Installed. The Instruction Manual Is Included,And There Are Also Many Guides Are Available On Youtube..
【Risk-Free Shopping And Quality Warranty】 One Year Warranty For This Back Glass Cover Replacement. We Can Send A New Rear Back Glass Or Full Refund If You Are Not 100% Satisfied With Our Products .Please Feel Free To Contact Us If You Have Any Questions..
【Comes With Full Set Toolkit】It Comes With A Full Set Professional Repair Toolkit. It Is Much Easier For You To Remove The Broken Back Glass.Please Note That You Need To Prepare A Hair Dryer,Becasuse The Original Adhesive Is Very Strong..
【Bigger Camera Hole】No Need To Remove The Camera Lens As The New Back Glass Is With A Bigger Camera Hole. You Can Install The New Back Glass Replacement Directly After Removing The Old Broken Glass. It Is Much Easier For You..
Brand: Perzework | Manufacturer: Perzework
See On Amazon #3
pop-tech 9 Pack Sticky Adhesive Replacement for Socket Mount Base, VHB 3M Sticker Pads for Phone Collapsible Grip & Stand Back - 9pcs 35mm Double Sided Tapes & 4pcs Cleaning Prep Pads
Asin: B07QHX6TV8 | Ean: 0728360149749 | UPC: 728360149749
Features
- 9 Pack Sticky Adhesive Disc for Socket Base - Sticker adhesives extra strong as backup is designed to reapply the socket mount. Multi pack of big adhesive replacement backing sticky is a life saver to re-attach or reuse switchable tops socket to cell phone cases for extending the life of your socket mount or wall mount or ring holder or dash car mount bracket as extendable and multipurpose applications. Super thin both side replacement tape kits accessories for switching out socket users!
- High Bond Round 3M Adhesive Pads - Anti gravity double face vhb sticky replacement tapes adhere and match for the bottom of collapsible grip is with high temperature resistance and stronghold stickiness. Sticker adhesive patches refills for reapplying the back of your socket. Foam adhesive disks reinstall and transfer your flex sockets secure in place and fix on the android phone. Super strong 3hb circle replacements stickers sheeting withstand the heat for moveable socket adhesive dots pieces.
- Cleaning Prep Pads Provided - The thin two sided circular sticky-pad replacement kit sheet comes with wet wipes to clean the surfaces before applying. If you holds up the alternative clear replacement adhesive dot circles both sides over time you may need ultra cleaning prep pads for cleaning solution. Make sure the mounting surface and tops socket mount bases is cleaned completely before applying a new 2 sided adhesive strips dots.
- Easy to Install - With 2 way sticky thingy, re-stick your spin socket or readjust to hold on a security camera even counter lights. Replace the rounds tearable tacky and removable blank gel adhesive backs & clean the back of phone and socket with wet wipe before restock the new 3 m replacable double stick adhesive tab parts, peel off the replaceable 3m tape adhesion pad to stick the base of socket mount for reattachment. Wait 24h to use vintage sticky auxiliary 3m adhesive patch tapes.
- What You Get - Heavy duty pop-tech heat resistant extra sticky loop 9 piece tiny 1.38 inch 2-sided replacement stickers discs remover for repositionable the bottom sticky of interchangeable socket wallet+ and 4 pack cleaning prep pads bulk. The multi-pack double-stick adhesive discs mat for locking and attaching to refresh or re-use the collapsible grip stands saved you much more available as back up and make it reusable and long-lasting if need change out or re-install the swivel socket.
- See more on Amazon...
Cleaning Prep Pads Provided - The Thin Two Sided Circular Sticky-Pad Replacement Kit Sheet Comes With Wet Wipes To Clean The Surfaces Before Applying. If You Holds Up The Alternative Clear Replacement Adhesive Dot Circles Both Sides Over Time You May Need Ultra Cleaning Prep Pads For Cleaning Solution. Make Sure The Mounting Surface And Tops Socket Mount Bases Is Cleaned Completely Before Applying A New 2 Sided Adhesive Strips Dots..
What You Get - Heavy Duty Pop-Tech Heat Resistant Extra Sticky Loop 9 Piece Tiny 1.38 Inch 2-Sided Replacement Stickers Discs Remover For Repositionable The Bottom Sticky Of Interchangeable Socket Wallet+ And 4 Pack Cleaning Prep Pads Bulk. The Multi-Pack Double-Stick Adhesive Discs Mat For Locking And Attaching To Refresh Or Re-Use The Collapsible Grip Stands Saved You Much More Available As Back Up And Make It Reusable And Long-Lasting If Need Change Out Or Re-Install The Swivel Socket..
Easy To Install - With 2 Way Sticky Thingy, Re-Stick Your Spin Socket Or Readjust To Hold On A Security Camera Even Counter Lights. Replace The Rounds Tearable Tacky And Removable Blank Gel Adhesive Backs & Clean The Back Of Phone And Socket With Wet Wipe Before Restock The New 3 M Replacable Double Stick Adhesive Tab Parts, Peel Off The Replaceable 3M Tape Adhesion Pad To Stick The Base Of Socket Mount For Reattachment. Wait 24H To Use Vintage Sticky Auxiliary 3M Adhesive Patch Tapes..
High Bond Round 3M Adhesive Pads - Anti Gravity Double Face Vhb Sticky Replacement Tapes Adhere And Match For The Bottom Of Collapsible Grip Is With High Temperature Resistance And Stronghold Stickiness. Sticker Adhesive Patches Refills For Reapplying The Back Of Your Socket. Foam Adhesive Disks Reinstall And Transfer Your Flex Sockets Secure In Place And Fix On The Android Phone. Super Strong 3Hb Circle Replacements Stickers Sheeting Withstand The Heat For Moveable Socket Adhesive Dots Pieces..
Brand: pop-tech | Manufacturer: pop-tech
Dimensions: 0.02 x 1.38 x 1.38 inches | Weight: 0.02 Pounds
See On Amazon #4
Mount Metal Plates Replacement Kits with 3M Adhensive for magnetic Car Mount Phone Holder 4 Pack (2 Rectangle 2 Round)
Asin: B01NAUFWZF | Model: 5823772832 | PartNumber: 5823772832 | Ean: 7371101119698
Features
- 4-Pack Replacement Kits 4.5cm*6.5cm rectangular metal plate x 2 Pieces,round metal plate with a diameter of 4cm X 2 Pieces
- Material The product is made of high-quality manganese steel material and the matte surface is easier to clean than ordinary ones.
- Thin&Practical The thickness of the product is only 0.5mm, which is light and practical.The metal plate is very thin and light.3M adhesive works well and is easy to install.
- Use For Magnetic Mount Metal plate is mainly used for magnetic phone support, it without magnetic.3M adhesive on the back of the sheet metal, used in the fixed plate of the back of the phone.
- Tip The metal plate do not with magnetic.The metal plate is design for magnetic car phone holder and can work well for it.
- See more on Amazon...
【Thin&Practical】The Thickness Of The Product Is Only 0.5Mm, Which Is Light And Practical.The Metal Plate Is Very Thin And Light.3M Adhesive Works Well And Is Easy To Install..
【Tip】 The Metal Plate Do Not With Magnetic.The Metal Plate Is Design For Magnetic Car Phone Holder And Can Work Well For It..
【Use For Magnetic Mount】Metal Plate Is Mainly Used For Magnetic Phone Support, It Without Magnetic.3M Adhesive On The Back Of The Sheet Metal, Used In The Fixed Plate Of The Back Of The Phone..
【Material】The Product Is Made Of High-Quality Manganese Steel Material And The Matte Surface Is Easier To Clean Than Ordinary Ones..
Brand: Yianerm | Manufacturer: Yianerm
Dimensions: 0.04 x 2.55 x 1.77 inches | Weight: 0.04 Pounds
See On Amazon #5
Metal Plates Replacement Set 4 Pack for Magnetic Car Mount. Kit of 4 Black Round Discs Without Holes for Case Back, Phone Magnets. Strong 3M Adhesive Backing Circular Cell Phone Holder Stickers.
Asin: B08YXSHXKN | Ean: 0723042048259 | UPC: 723042048259
Features
- REPLACEMENT METAL PLATES 4 PACK SET is perfectly matched with phone back case. Circular iPhone metal plates are not magnets - work ONLY with magnetic car mount, air vent phone holder and houshold magnets for crafts - there is no magnetism inside the phone case adhesive circles.
- STRONG ADHESIVE METAL PLATES: Iron magnet phone stickers for car mount have strong 3M adhesive. Phone magnetic mount metal plates stick on your phone case back firmly and securely. No worry of falling off with replacement metal plates sticker for magnetic cell phone mount holder.
- CUTE BLACK METAL PLATES for cell phone car magnet is 0.039/0.1 cm thickness, 1.3/3.3 cm diameter. The surface of the cute round metal sticker for magnetic phone holder with no sharp edges would not damage your fingers and mobile phone.
- PHONE METAL DISCS FOR CASE | Stick metal phone magnet sticker for car mount to phone case, battery cover or directly to your device. Then mobile device with steel magnetic plates for phone case will automatically suck to the car mount
- UNIVERSAL PHONE MAGNET METAL PLATES with pretty black color match iPhone, iPad, Samsung Galaxy Note and other smartphones or tablets. Self adhesive metal discs for phone back case will become an additional accessory for your gadget.
- See more on Amazon...
Cute Black Metal Plates For Cell Phone Car Magnet Is 0.039"/0.1 Cm Thickness, 1.3"/3.3 Cm Diameter. The Surface Of The Cute Round Metal Sticker For Magnetic Phone Holder With No Sharp Edges Would Not Damage Your Fingers And Mobile Phone..
Universal Phone Magnet Metal Plates With Pretty Black Color Match Iphone, Ipad, Samsung Galaxy Note And Other Smartphones Or Tablets. Self Adhesive Metal Discs For Phone Back Case Will Become An Additional Accessory For Your Gadget..
Phone Metal Discs For Case | Stick Metal Phone Magnet Sticker For Car Mount To Phone Case, Battery Cover Or Directly To Your Device. Then Mobile Device With Steel Magnetic Plates For Phone Case Will Automatically Suck To The Car Mount.
Strong Adhesive Metal Plates: Iron Magnet Phone Stickers For Car Mount Have Strong 3M Adhesive. Phone Magnetic Mount Metal Plates Stick On Your Phone Case Back Firmly And Securely. No Worry Of Falling Off With Replacement Metal Plates Sticker For Magnetic Cell Phone Mount Holder..
Brand: SALEX | Manufacturer: SALEX
Dimensions: 0.04 x 1.30 x 1.30 Inches | Weight: 0.02 pounds
See On Amazon #6
PKYAA 8 Pack Sticky Adhesive Compatible with Socket Base, Double-Sided Replacement Tape for Collapsible Grip & Stand Back, 4pcs Sticker Pads for Car Magnetic Phone Holder
Asin: B07KT1VZHF | Model: PKYAA-3M001 | PartNumber: PKYAA-3M001 | Ean: 0662225063026 | UPC: 662225063026
Features
- PKYAA Sticky Adhesive Replacement Superior Performance PKYAA double-sided bonding adhesive successfully bonds various surfaces for permanent and repositionable applications. High strength allows use of smaller bond areas, quick cure time.
- 8 Pcs Big Adhesive Pads for Collapsible Grip Base PKYAA double-sided bonding pads provide surface adhesion to make selecting the right pads for your collapsible grip. Diameter: 1.4 inches (35mm) is perfectly sized for socket base.
- 4 Pcs Small Adhesive Pads for Car Dashboard Mount Base Diameter: 0.9 inches (23mm) is universally compatible with various car dashboard and magnetic mount Bases. Very high bonding, maintain your phone stability even on rough roads.
- Easy to Use Please clean the adhesive surface before use and let it dry, free of contaminates. And wait at least 24 hours to use after stuck. First peel off the white side of the adhesive and stick it to the car mount base. After applying some pressure on the adhesive, peel off the red film side of the adhesive and stick the car mount to your car dashboard.
- Durability These Double-sided stickers roll with pressure sensitive adhesive bonds almost instantly with no drying time. It also resists heat and moisture, and protects adhesive surfaces against scratches, easy peels off without leaving any sticky residue behind.
- See more on Amazon...
【4 Pcs Small Adhesive Pads For Car Dashboard Mount Base】Diameter: 0.9 Inches (23Mm) Is Universally Compatible With Various Car Dashboard And Magnetic Mount Bases. Very High Bonding, Maintain Your Phone Stability Even On Rough Roads..
【Durability】These Double-Sided Stickers Roll With Pressure Sensitive Adhesive Bonds Almost Instantly With No Drying Time. It Also Resists Heat And Moisture, And Protects Adhesive Surfaces Against Scratches, Easy Peels Off Without Leaving Any Sticky Residue Behind..
【Easy To Use】Please Clean The Adhesive Surface Before Use And Let It Dry, Free Of Contaminates. And Wait At Least 24 Hours To Use After Stuck. First Peel Off The White Side Of The Adhesive And Stick It To The Car Mount Base. After Applying Some Pressure On The Adhesive, Peel Off The Red Film Side Of The Adhesive And Stick The Car Mount To Your Car Dashboard..
【8 Pcs Big Adhesive Pads For Collapsible Grip Base】Pkyaa Double-Sided Bonding Pads Provide Surface Adhesion To Make Selecting The Right Pads For Your Collapsible Grip. Diameter: 1.4 Inches (35Mm) Is Perfectly Sized For Socket Base..
Brand: PKYAA | Manufacturer: PKYAA
Dimensions: 0.03 x 1.38 x 1.38 Inches | Weight: 0.02 pounds
See On Amazon #7
Weewooday 8 Pieces Metal Plate Mandala Flower Mount Metal Plate for Cell Phone Magnet Holder Magnetic Car Mount Compatible with Magnetic Car Mounts Replacement Sticker
Asin: B0995KL4NW | Model: Weewooday-Metal Plate-Xg001 | PartNumber: Weewooday-Metal Plate-Xg001
Features
- What will you get: you will receive 8 pieces of metal plates in 8 different mandala patterns, and each pattern has 1 piece, the metal sheet is extremely thin so that it can be hidden inside of phone case without adding bulk
- Metal plates replacement: magic metal plates work with any device and can be applied as replacement plates for a strong secure grip, work along with a universal magnetic smartphone holder, magnetic air vent mount, and dashboard magnet car mount
- Exquisite pattern: the metal phone plate printed with stylish mandala flower pattern, multiple design and bright color, which is delicate and novel, easily catching the attention of people, a good decoration for your phone
- Thin metal plates: with a thickness of 0.5 mm, slim metal plates for magnetic mount easily attach to your phone, thin and comfortable to use; A smooth surface with no pointed edges will not hurt your fingers and smartphone, bringing you a nice experience
- Nice adhesion: each universal metal plate has adhesives tape and easy to stick onto the back of the phone or case, so these plates set your phone on the car mount easier and more securer and you can go hands-free even on the bumpiest of roads, which will give you pretty convenience
- See more on Amazon...
Exquisite Pattern: The Metal Phone Plate Printed With Stylish Mandala Flower Pattern, Multiple Design And Bright Color, Which Is Delicate And Novel, Easily Catching The Attention Of People, A Good Decoration For Your Phone.
Nice Adhesion: Each Universal Metal Plate Has Adhesives Tape And Easy To Stick Onto The Back Of The Phone Or Case, So These Plates Set Your Phone On The Car Mount Easier And More Securer And You Can Go Hands-Free Even On The Bumpiest Of Roads, Which Will Give You Pretty Convenience.
Thin Metal Plates: With A Thickness Of 0.5 Mm, Slim Metal Plates For Magnetic Mount Easily Attach To Your Phone, Thin And Comfortable To Use; A Smooth Surface With No Pointed Edges Will Not Hurt Your Fingers And Smartphone, Bringing You A Nice Experience.
Metal Plates Replacement: Magic Metal Plates Work With Any Device And Can Be Applied As Replacement Plates For A Strong Secure Grip, Work Along With A Universal Magnetic Smartphone Holder, Magnetic Air Vent Mount, And Dashboard Magnet Car Mount.
Brand: Weewooday | Manufacturer: Weewooday
Weight: 0.04 Pounds
See On Amazon #8
GradCap Metal Plate for Magnetic Phone Mount - 4 Packs Universal Ultra Thin Black Metal Disc w/Strong 3M Adhesive Sticker - Replacement Accessory Kit - 2 Rectangle (1.75"x2.5") & 2 Round (1.5"x1.5")
Asin: B07FRHTYCJ | Model: GCMPCM18COMPO | PartNumber: GCMPCM18COMPO | Ean: 0680580764600 | UPC: 680580764600
Features
- [ ] GradCap Magnetic Phone Sticker is using 3M double-sided grade quality sticker and that is why it provides strong adhesive on its back - Keeping your device secure and stable while driving on any road conditions. Our Magnetic Plate will leave no marks or residuals after removing out from your phone or mobile case.
- [ ] Perfect Size for all smartphones. These Car Metal Discs can work with all magnetic car mount, air vent holder, dashboard mount, windscreen mount, automobile cradle. Valuable Car Accessories for all drivers.
- [ ] Although our metal sheet is made of premium-quality manganese steel material, the product is still less 0.02 mm in thickness.
- [ ] 1~2 minutes Installation without any hassle.
- [ ] These are only Magnetic Phone Car Mount Discs which made of Iron (These are NOT CAR PHONE MAGNETS).
- [ ] It is not just about Value for money and Superior Performance , your purchase is also backed by GradCap s Lifetime Tech Support and 1 Year Warranty.
- See more on Amazon...
[𝗨𝗟𝗧𝗥𝗔 𝗧𝗛𝗜𝗡 𝗔𝗡𝗗 𝗟𝗜𝗚𝗛𝗧] Although Our Metal Sheet Is Made Of Premium-Quality Manganese Steel Material, The Product Is Still Less 0.02 Mm In Thickness..
[𝗕𝗘𝗙𝗢𝗥𝗘 𝗬𝗢𝗨 𝗕𝗨𝗬] These Are Only Magnetic Phone Car Mount Discs Which Made Of Iron (These Are Not Car Phone Magnets)..
[𝗕𝗨𝗬 𝗪𝗜𝗧𝗛 𝗖𝗢𝗡𝗙𝗜𝗗𝗘𝗡𝗖𝗘] It Is Not Just About “Value For Money” And “Superior Performance”, Your Purchase Is Also Backed By Gradcap’S Lifetime Tech Support And 1 Year Warranty..
[𝗘𝗔𝗦𝗘 𝗢𝗙 𝗜𝗡𝗦𝗧𝗔𝗟𝗟𝗔𝗧𝗜𝗢𝗡] 1~2 Minutes Installation Without Any Hassle..
[𝗖𝗢𝗠𝗣𝗔𝗧𝗜𝗕𝗜𝗟𝗜𝗧𝗬] Perfect Size For All Smartphones. These Car Metal Discs Can Work With All Magnetic Car Mount, Air Vent Holder, Dashboard Mount, Windscreen Mount, Automobile Cradle. Valuable Car Accessories For All Drivers..
Brand: GradCap | Manufacturer: GradCap
Dimensions: 0.01 x 2.60 x 1.75 Inches
Warranty: Manufacturer warranty for 90 days from date of purchase.
See On Amazon #9
Replacement Metal Plates Set 16 Pack for Magnetic Car Mount. Kit of 16 Magnets for Back of Phone Case. Black Rectangular Iron Stickers Without Holes Discs. 3M Adhesive Backing Steel Sheets.
Asin: B09B6XGTWL | Ean: 0608011770174 | UPC: 608011770174
Features
- REPLACEMENT BLACK METAL PLATES 16 PACK | These flat metal plates perfectly work along with all magnetic car, wall, cases, air vent phone mounts. These iron disks only for magnetic car mount are not magnets mount, just the metal plates for phone mounts to adhere to.
- STRONG 3M ADHESIVE BACKING | Pretty iron stickers kit for car mount have strong 3M adhesive on the back. It will not come off and no sticky residual after detaching. Powerful magnetic keeps your device stable and secure while driving. Phone mount steel plate sticks on your phone back or case firmly and securely. No worry of falling off.
- ULTRA THIN METAL PLATE | The smartphone rectangular steel sheet is ultra thin so that it can be hidden inside of phone case without adding bulk. 0.02 / 0.5 mm thickness, 2.56 x 1.77 / 65 x 45 mm. These slim magnet stickers set easily attach to your smartphone, tablet, GPS. The surface of the magnets for phone car mount with no sharp edges would not damage your fingers and cell phone.
- SUITABLE ACCESSORIES | Stick steel plate for phone bracket mount behind your case/battery cover, on a rugged case, or directly to your device, put it between cellphone and its phone case. Then device will automatically suck as it closes to the car mount. Great for wireless charging.
- ADHESIVE METAL PLATES | Black colored metal plates for magnetic car mount will look great on iPhone 12, 11 Pro, Xs Max, Xr, 8 Plus, 7s, 7 Plus, 6s Plus, iPad, Samsung Galaxy S22+, S21+, S12+, S11+, S10+/S10/S10e/S9+/S8+, Edge, Note 20, HTC ONE, LG, Sony Xperia, Google Nexus Pixel, Motorola.
- IF THE STRENGTH OF MAGNETISM IS NOT ENOUGH - use 2 metal plates together, sticking on top of each other, getting a double steel sheet. This method will increase the thickness of the metal, which will increase the suction power of the magnet.
- See more on Amazon...
Ultra Thin Metal Plate | The Smartphone Rectangular Steel Sheet Is Ultra Thin So That It Can Be Hidden Inside Of Phone Case Without Adding Bulk. 0.02" / 0.5 Mm Thickness, 2.56" X 1.77" / 65 X 45 Mm. These Slim Magnet Stickers Set Easily Attach To Your Smartphone, Tablet, Gps. The Surface Of The Magnets For Phone Car Mount With No Sharp Edges Would Not Damage Your Fingers And Cell Phone..
Adhesive Metal Plates | Black Colored Metal Plates For Magnetic Car Mount Will Look Great On Iphone 12, 11 Pro, Xs Max, Xr, 8 Plus, 7S, 7 Plus, 6S Plus, Ipad, Samsung Galaxy S22+, S21+, S12+, S11+, S10+/S10/S10e/S9+/S8+, Edge, Note 20, Htc One, Lg, Sony Xperia, Google Nexus Pixel, Motorola..
If The Strength Of Magnetism Is Not Enough - Use 2 Metal Plates Together, Sticking On Top Of Each Other, Getting A Double Steel Sheet. This Method Will Increase The Thickness Of The Metal, Which Will Increase The Suction Power Of The Magnet..
Suitable Accessories | Stick Steel Plate For Phone Bracket Mount Behind Your Case/Battery Cover, On A Rugged Case, Or Directly To Your Device, Put It Between Cellphone And Its Phone Case. Then Device Will Automatically Suck As It Closes To The Car Mount. Great For Wireless Charging..
Strong 3M Adhesive Backing | Pretty Iron Stickers Kit For Car Mount Have Strong 3M Adhesive On The Back. It Will Not Come Off And No Sticky Residual After Detaching. Powerful Magnetic Keeps Your Device Stable And Secure While Driving. Phone Mount Steel Plate Sticks On Your Phone Back Or Case Firmly And Securely. No Worry Of Falling Off..
Brand: SALEX | Manufacturer: SALEX
Dimensions: 0.20 x 2.56 x 1.77 Inches | Weight: 0.35 pounds
Warranty: IF THE STRENGTH OF MAGNETISM IS NOT ENOUGH - use 2 metal plates together, sticking on top of each other, getting a double steel sheet. This method will increase the thickness of the metal, which will increase the suction power of the magnet.
See On Amazon #10
2-Pack Replacement Mount Metal Plates D.Sking Car Phone Holder 3M Adhesive CD Metal Plates for Car Mount Car Kits (Silver)
Asin: B089G3LSDQ | Ean: 6462819224727
Features
- METAL PLATE: Easy to use with all magnetic car mount holder,sock holder
- 3M ADHESIVE: Each metal plate has strong 3M adhesives tape, Easy to stick onto the back of phone or case without a hassle
- COMPATIBILITY: All of the metal plates are not magnetic, we strongly recommend to use these metal plates along with universal magnetic mounts wherever you want
- NOTE: Metal plate may disable WIRELESS CHARGING, if you stick it on the back of the phone/case,Suggest to take the case off when use wireless charging
- Quantity: 2-Pack(2 Circle),30 Days money back warranty for quality problems.
- See more on Amazon...
‖‖ Compatibility: All Of The Metal Plates Are Not Magnetic, We Strongly Recommend To Use These Metal Plates Along With Universal Magnetic Mounts Wherever You Want.
‖‖ Quantity: 2-Pack(2 Circle),30 Days Money Back Warranty For Quality Problems..
‖‖ Note: Metal Plate May Disable Wireless Charging, If You Stick It On The Back Of The Phone/Case,Suggest To Take The Case Off When Use Wireless Charging.
‖‖ 3M Adhesive: Each Metal Plate Has Strong 3M Adhesives Tape, Easy To Stick Onto The Back Of Phone Or Case Without A Hassle.
Brand: D.Sking trade Groud | Manufacturer: D.Sking
Dimensions: 0.79 x 4.72 x 3.94 inches | Weight: 0.02 Pounds
See On Amazon #11
TOMIBAOLE 10 pcs Clear Sticky Adhesive Pads for Socket Base,1.34 inches Transparent Double Sided Tapes Replacement for Collapsible Grip,Small Car Phone Holder,Finger Ring Stand Back
Asin: B0CR98LXDG | Ean: 0717225593681 | UPC: 717225593681
Features
- Performance Introduction: We use nano clear adhesive pad,cut into a round adhesive pad with diameter of 34mm (1.34 inches) and thickness of 1mm (0.04 inches), it has strong adhesion, high temperature resistance, and resistance, making the socket holder more durable.
- How to Use: As a replacement for socket base adhesive, first remove the used adhesive of the socket holder and replace it with our clear round adhesive pad. Use the provided cleaning pack to wipe the back of the phone case and stick it on a dry and clean surface. Then press and apply pressure by hand to maximize contact with the adhesive pad. Wait for 15 minutes before using.
- Strong Adhesion: The high-strength adhesive makes the base back firmly adhere to the contact surface of the phone case, and the adhesion becomes stronger over time.
- Multipurpose Use: It can also be used for other small items, such as collapsible phone grip car mount, finger ring holder, mini car holder, wall hook, and can also be used for home decoration, such as adhesive holder for sockets, wallpaper, posters, small photo frames, DIY decorations, blankets, and other purposes.
- Removable and Traceless: If you want to replace the adhesive pad, you can use a thin ruler or floss to better peel off the base mount. This transparent nano adhesive pad is easy to remove, leaving no adhesive residue and will not damage the surface.
- See more on Amazon...
Strong Adhesion: The High-Strength Adhesive Makes The Base Back Firmly Adhere To The Contact Surface Of The Phone Case, And The Adhesion Becomes Stronger Over Time..
Removable And Traceless: If You Want To Replace The Adhesive Pad, You Can Use A Thin Ruler Or Floss To Better Peel Off The Base Mount. This Transparent Nano Adhesive Pad Is Easy To Remove, Leaving No Adhesive Residue And Will Not Damage The Surface..
Multipurpose Use: It Can Also Be Used For Other Small Items, Such As Collapsible Phone Grip Car Mount, Finger Ring Holder, Mini Car Holder, Wall Hook, And Can Also Be Used For Home Decoration, Such As Adhesive Holder For Sockets, Wallpaper, Posters, Small Photo Frames, Diy Decorations, Blankets, And Other Purposes..
How To Use: As A Replacement For Socket Base Adhesive, First Remove The Used Adhesive Of The Socket Holder And Replace It With Our Clear Round Adhesive Pad. Use The Provided Cleaning Pack To Wipe The Back Of The Phone Case And Stick It On A Dry And Clean Surface. Then Press And Apply Pressure By Hand To Maximize Contact With The Adhesive Pad. Wait For 15 Minutes Before Using..
Brand: TOMIBAOLE | Manufacturer: TOMIBAOLE
See On Amazon #12
Scosche MAGRKI MagicMount Phone Replacement Plate Kit - for Magnetic Car Phone Mount Holder with Extra Strength Hold, Universal with All Devices, Black
Asin: B00I608BG6 | Model: MAGRKI | PartNumber: MAGRKI | Ean: 0033991045538 | UPC: 033991045538
Features
- Replacement Kit - These metal magnetic plates work with any magnet car phone holder mount. Simply stick the magnet plate pad to the back of any iPhone, Android or Tablet. The extra strength sticky metal plate and protective film ensure a long lasting hold.
- Strong Hold - These phone metal plates act like sticky pads and are made with a heat resistant automotive grade formula. They are designed to provide a strong backing in all types of environments. The metal pads are 100% mobile device safe.
- Universal Compatibility - Our metal phone plate works with any magnetic car cell phone holder. The metal plates come in different sizes to support large and smaller size devices. Apply directly to your wireless device or phone case.
- Protective Film - The protective films act like double sided sticky pads and are designed to easily mount and remove the magnetic plate without damaging your phone. Apply the protective film to the back of your phone before adding the metal plate for phone magnet.
- Accessories Included - Large MagicPlate, Medium plate, small MagicPlate, protective film and user manual
- Buy with Confidence - Backed by Scosche s Lifetime Tech Support and 3-year warranty
- See more on Amazon...
Universal Compatibility - Our Metal Phone Plate Works With Any Magnetic Car Cell Phone Holder. The Metal Plates Come In Different Sizes To Support Large And Smaller Size Devices. Apply Directly To Your Wireless Device Or Phone Case..
Accessories Included - Large Magicplate, Medium Plate, Small Magicplate, Protective Film And User Manual.
Buy With Confidence - Backed By Scosche’S Lifetime Tech Support And 3-Year Warranty.
Protective Film - The Protective Films Act Like Double Sided Sticky Pads And Are Designed To Easily Mount And Remove The Magnetic Plate Without Damaging Your Phone. Apply The Protective Film To The Back Of Your Phone Before Adding The Metal Plate For Phone Magnet..
Strong Hold - These Phone Metal Plates Act Like Sticky Pads And Are Made With A Heat Resistant Automotive Grade Formula. They Are Designed To Provide A Strong Backing In All Types Of Environments. The Metal Pads Are 100% Mobile Device Safe..
First Available: 05/15/2017
Brand: Scosche | Manufacturer: Scosche
Dimensions: 7.00 x 0.50 x 2.75 Inches | Weight: 0.05 Pounds
Warranty: Manufacturer
See On Amazon #13
DSTELIN Universal Metal Plate 8 Pack for Magnetic Phone Car Mount Holder Cradle with Adhesive (Compatible with Magnetic Mounts) - 4 Rectangle and 4 Round, Black
Asin: B07CJ453V6 | Model: 5647429262 | PartNumber: 5647429262 | Ean: 0705020223087 | UPC: 705020223087
Features
- Universal metal plate: Easy to use with all magnetic car mount holder
- Package includes: Rectangle - 1.8 x 2.6 (4Pcs) ; Round one 's diameter - 1.6 ( 4Pcs)
- Strong adhesive: Each metal plate has strong adhesives tape, Easy to stick onto the back of phone or case without a hassle
- Wide compatibility: All of the metal plates are not magnetic, we strongly recommend to use these metal plates along with universal magnetic mounts wherever you want
- Important note: Metal plate may disable wireless charging, if you stick it on the back of the phone/case,Suggest to take the case off when use wireless charging
- See more on Amazon...
Strong Adhesive: Each Metal Plate Has Strong Adhesives Tape, Easy To Stick Onto The Back Of Phone Or Case Without A Hassle.
Important Note: Metal Plate May Disable Wireless Charging, If You Stick It On The Back Of The Phone/Case,Suggest To Take The Case Off When Use Wireless Charging.
Wide Compatibility: All Of The Metal Plates Are Not Magnetic, We Strongly Recommend To Use These Metal Plates Along With Universal Magnetic Mounts Wherever You Want.
Package Includes: Rectangle - 1.8" X 2.6" (4Pcs) ; Round One 'S Diameter - 1.6" ( 4Pcs).
Brand: DSTELIN | Manufacturer: DSTELIN
Dimensions: 0.20 x 2.56 x 1.77 inches
See On Amazon #14
Pau1Hami1ton Adhesive Thin Metal Plates(Compatible with Magnetic Mounts),4 Piece Metal Plates for Phone Case,Metal Plate for Car,Metal Plates for Phone(2 Rectangle and 2 Round) S-07N(Black)
Asin: B0BRQDRTBT | Model: S-07N-2 | PartNumber: S-07N-2
Features
- 4.5 cm x 6.5 cm rectangular thin metal plate (2Pcs), diameter 4 cm ( 2Pcs) round metal plates
- Please note that the metal plate does not have magnets. They are the only spare parts compatible with magnetic mounts
- Stick to the back of your phone or put it between your phone and the case.The Adhesive magnetic plate has strong adhesion, which can keep your equipment stable and safe during driving.
- If you stick a phone magnet plate on the back of your phone or phone case, you may disable wireless charging.Suggest to take the case off when use wireless charging
- 100% SATISFACTION Contact us if you are not satisfied, we promise that we will make it right for you.
- See more on Amazon...
Stick To The Back Of Your Phone Or Put It Between Your Phone And The Case.The Adhesive Magnetic Plate Has Strong Adhesion, Which Can Keep Your Equipment Stable And Safe During Driving..
100% Satisfaction Contact Us If You Are Not Satisfied, We Promise That We Will Make It Right For You..
If You Stick A Phone Magnet Plate On The Back Of Your Phone Or Phone Case, You May Disable Wireless Charging.Suggest To Take The Case Off When Use Wireless Charging.
Please Note That The Metal Plate Does Not Have Magnets. They Are The Only Spare Parts Compatible With Magnetic Mounts.
Brand: Pau1Hami1ton | Manufacturer: Pau1Hami1ton
Dimensions: 0.39 x 5.12 x 3.54 inches | Weight: 0.07 Pounds
See On Amazon #15
SALEX Cell Phone Metal Plates for Magnetic Car Mount, Wall, Phone Holder. Replacement Set of 4 Silver Round Iron Discs for Magnet Mount. 3M Adhesive Thin Steel Phone Case Back Magnet Stickers 4 Pack.
Asin: B093DP5G39 | Ean: 0723042048457 | UPC: 723042048457
Features
- REPLACEMENT SILVER METAL PLATES 4 PACK SET is perfectly matched with phone back case. Circular iPhone metal plates are not magnets - work ONLY with magnetic car mount, air vent phone holder and houshold magnets for crafts - there is no magnetism inside the phone case adhesive flat circles.
- STRONG ADHESIVE THIN METAL PLATES | Phone magnetic mount metal plates stick on your phone case back firmly and securely with 3m adhesive backing.
- LARGE CELL PHONE CASE METAL DISCS for magnet mount is 0.02 = 0.05 cm thickness, 1.57 = 4 cm diameter. The surface of the cute round metal sticker for magnetic phone holder with no sharp edges would not damage your fingers and mobile phone.
- STICKY PHONE METAL DISCS FOR CASE | Stick car mount metal magnet sticker to phone case, battery cover. directly to your gadget, put it between cellphone and phone case.
- UNIVERSAL PHONE MAGNET METAL PLATES with clear mirror silver color match iPhone, iPad, Samsung Galaxy Note and other smartphones or tablets. Self adhesive metal discs compatible with all types of magnetic mounts.
- IF THE STRENGTH OF MAGNETISM IS NOT ENOUGH - use 2 metal plates together to make a double steel sheet. This method will increase the thickness of the metal, which will increase the suction force of the magnet.
- See more on Amazon...
Large Cell Phone Case Metal Discs For Magnet Mount Is 0.02" = 0.05 Cm Thickness, 1.57" = 4 Cm Diameter. The Surface Of The Cute Round Metal Sticker For Magnetic Phone Holder With No Sharp Edges Would Not Damage Your Fingers And Mobile Phone..
Universal Phone Magnet Metal Plates With Clear Mirror Silver Color Match Iphone, Ipad, Samsung Galaxy Note And Other Smartphones Or Tablets. Self Adhesive Metal Discs Compatible With All Types Of Magnetic Mounts..
If The Strength Of Magnetism Is Not Enough - Use 2 Metal Plates Together To Make A Double Steel Sheet. This Method Will Increase The Thickness Of The Metal, Which Will Increase The Suction Force Of The Magnet..
Sticky Phone Metal Discs For Case | Stick Car Mount Metal Magnet Sticker To Phone Case, Battery Cover. Directly To Your Gadget, Put It Between Cellphone And Phone Case..
Strong Adhesive Thin Metal Plates | Phone Magnetic Mount Metal Plates Stick On Your Phone Case Back Firmly And Securely With 3M Adhesive Backing..
Brand: SALEX | Manufacturer: SALEX
Dimensions: 0.02 x 1.57 x 1.57 inches | Weight: 0.01 Pounds
See On Amazon #16
SALEX Cell Phone Metal Plates for Magnetic Car Mount, Wall, Phone Holder. Replacement Set of 8 Silver Round Iron Discs for Magnet Mount. 3M Adhesive Thin Steel Phone Case Back Magnet Stickers 8 Pack.
Asin: B093DPBNYW | Ean: 0723042048488 | UPC: 723042048488
Features
- REPLACEMENT SILVER METAL PLATES 8 PACK SET is perfectly matched with phone back case. Circular iPhone metal plates are not magnets - work ONLY with magnetic car mount, air vent phone holder and houshold magnets for crafts - there is no magnetism inside the phone case adhesive flat circles.
- STRONG ADHESIVE THIN METAL PLATES | Phone magnetic mount metal plates stick on your phone case back firmly and securely with 3m adhesive backing.
- LARGE CELL PHONE CASE METAL DISCS for magnet mount is 0.02 = 0.05 cm thickness, 1.57 = 4 cm diameter. The surface of the cute round metal sticker for magnetic phone holder with no sharp edges would not damage your fingers and mobile phone.
- STICKY PHONE METAL DISCS FOR CASE | Stick car mount metal magnet sticker to phone case, battery cover. directly to your gadget, put it between cellphone and phone case.
- UNIVERSAL PHONE MAGNET METAL PLATES with clear mirror silver color match iPhone, iPad, Samsung Galaxy Note and other smartphones or tablets. Self adhesive metal discs compatible with all types of magnetic mounts.
- IF THE STRENGTH OF MAGNETISM IS NOT ENOUGH - use 2 metal plates together to make a double steel sheet. This method will increase the thickness of the metal, which will increase the suction force of the magnet.
- See more on Amazon...
Large Cell Phone Case Metal Discs For Magnet Mount Is 0.02" = 0.05 Cm Thickness, 1.57" = 4 Cm Diameter. The Surface Of The Cute Round Metal Sticker For Magnetic Phone Holder With No Sharp Edges Would Not Damage Your Fingers And Mobile Phone..
Universal Phone Magnet Metal Plates With Clear Mirror Silver Color Match Iphone, Ipad, Samsung Galaxy Note And Other Smartphones Or Tablets. Self Adhesive Metal Discs Compatible With All Types Of Magnetic Mounts..
If The Strength Of Magnetism Is Not Enough - Use 2 Metal Plates Together To Make A Double Steel Sheet. This Method Will Increase The Thickness Of The Metal, Which Will Increase The Suction Force Of The Magnet..
Sticky Phone Metal Discs For Case | Stick Car Mount Metal Magnet Sticker To Phone Case, Battery Cover. Directly To Your Gadget, Put It Between Cellphone And Phone Case..
Strong Adhesive Thin Metal Plates | Phone Magnetic Mount Metal Plates Stick On Your Phone Case Back Firmly And Securely With 3M Adhesive Backing..
Brand: SALEX | Manufacturer: SALEX
Dimensions: 0.02 x 1.57 x 1.57 Inches | Weight: 0.01 pounds
See On Amazon #17
Phone Metal Plates for Magnetic Car Mount, Wall, Phone Holder. Replacement Set of 16 Silver Round Iron Discs Without Holes. 3M Adhesive Thin Steel Cell Phone Case Back Magnet Stickers 16 Pack.
Asin: B093DQBPTF | Ean: 0723042048518 | UPC: 723042048518
Features
- REPLACEMENT SILVER METAL PLATES 16 PACK SET is perfectly matched with phone back case. Circular iPhone metal plates are not magnets - work ONLY with magnetic car mount, air vent phone holder and houshold magnets for crafts - there is no magnetism inside the phone case adhesive flat circles.
- STRONG ADHESIVE THIN METAL PLATES FOR MAGNET MOUNT | Phone magnetic mount metal plates stick on your phone case back firmly and securely with 3m adhesive backing.
- LARGE CELL PHONE CASE METAL DISCS for phone magnet is 0.02 = 0.05 cm thickness, 1.57 = 4 cm diameter. The surface of the cute round metal sticker for magnetic phone holder with no sharp edges would not damage your fingers and mobile phone.
- STICKY PHONE METAL DISCS FOR CASE | Stick car mount metal magnet sticker to phone case, battery cover. directly to your gadget, put it between cellphone and phone case.
- UNIVERSAL CASE BACK MAGNETS FOR PHONE CAR MOUNT with clear mirror silver color match iPhone, iPad, Samsung Galaxy Note and other smartphones or tablets. Self adhesive metal discs compatible with all types of magnetic mounts.
- IF THE STRENGTH OF MAGNETISM IS NOT ENOUGH - use 2 metal plates together to make a double steel sheet. This method will increase the thickness of the metal, which will increase the suction force of the magnet.
- See more on Amazon...
Large Cell Phone Case Metal Discs For Phone Magnet Is 0.02" = 0.05 Cm Thickness, 1.57" = 4 Cm Diameter. The Surface Of The Cute Round Metal Sticker For Magnetic Phone Holder With No Sharp Edges Would Not Damage Your Fingers And Mobile Phone..
Universal Case Back Magnets For Phone Car Mount With Clear Mirror Silver Color Match Iphone, Ipad, Samsung Galaxy Note And Other Smartphones Or Tablets. Self Adhesive Metal Discs Compatible With All Types Of Magnetic Mounts..
If The Strength Of Magnetism Is Not Enough - Use 2 Metal Plates Together To Make A Double Steel Sheet. This Method Will Increase The Thickness Of The Metal, Which Will Increase The Suction Force Of The Magnet..
Sticky Phone Metal Discs For Case | Stick Car Mount Metal Magnet Sticker To Phone Case, Battery Cover. Directly To Your Gadget, Put It Between Cellphone And Phone Case..
Strong Adhesive Thin Metal Plates For Magnet Mount | Phone Magnetic Mount Metal Plates Stick On Your Phone Case Back Firmly And Securely With 3M Adhesive Backing..
Brand: SALEX | Manufacturer: SALEX
Dimensions: 0.02 x 1.57 x 1.57 inches | Weight: 0.01 Pounds
See On Amazon #18
pop-tech Sticky Adhesive Replacement for Socket Wallet Plus Oval Base, 9pcs 3M VHB Strong Glue Sticker Pads for Cell Phone Wallet+ Case Back, Double Sided Tape for All Cellphone iPhone 14 13 Samsung
Asin: B08P47TRXS | Ean: 0618528033037 | UPC: 618528033037
Features
- DESIGNED FOR SOCKET WALLET SERIES BASE 9 PACK 3M VHB adhesive for Oval Base of Socket Wallet and Socket Wallet Plus, exclusively designed for smartphone socket wallet, perfect replacement kits for socket wallet users. When your socket wallet loses its viscosity, these swappable high bond backup installation adhesives are a great choice for re-sticking / re-using it.
- HIGH STICKINESS Super double-sided polygon cellphone wallet replacement adhesion strip's stickiness is 40% stronger than original 2 sided tape sticky glue, and it is high temperature resistance(120 +). They are sturdy and durable, and repositionable features bring convenience to your mobile phone wallet usage.
- EASY TO USE The 3M adhesive can be easily re-installed in the socket wallet without tools. (1) 9pcs clear protective film provided, protect your phone from scratch, only need to peel off the protective film when removing the socket wallet adhesive, WITHOUT RESIDUE. (2) 6pcs wipe pads provided, please wipe the phone wallet base and the surface of the phone case carefully before sticking.
- NOTE (1) Please wait 24 hours to ensure that the sticker has the optimal adhesion after stuck. (2) Please do not stick the clear protective film or 3M adhesive to SILICONE, HIGHLY TEXTURED, and SOFT case. (3) Make ensure the desired surface is wiped and dry. (4) Do not touch the adhesive gel directly with hands. (5) Each 3M VHB rubber adhesive is for one-time use.
- WARRANTY Pop-tech products provide 12 months worry-free after-sales warranty service (extended from 12 months to 18 months if you contact customer service with any problem). Compatible with Any cell phone, Tablets, IOS, Android, iPhone, Samsung, Lenovo, Google, Sony, LG, HTC, TCL, XIAOMI, HUAWEI, HONOR, ONEPLUS, MOTOROLA, iPhone 14, 14 Plus, 14 Pro, 14 Pro Max, iphone 13 Series, 12, 12 Pro Max, 11, Xs, XR, X, SE, etc.
- See more on Amazon...
【Easy To Use】The 3M Adhesive Can Be Easily Re-Installed In The Socket Wallet Without Tools. (1) 9Pcs Clear Protective Film Provided, Protect Your Phone From Scratch, Only Need To Peel Off The Protective Film When Removing The Socket Wallet Adhesive, Without Residue. (2) 6Pcs Wipe Pads Provided, Please Wipe The Phone Wallet Base And The Surface Of The Phone Case Carefully Before Sticking..
【Warranty】Pop-Tech Products Provide 12 Months Worry-Free After-Sales Warranty Service (Extended From 12 Months To 18 Months If You Contact Customer Service With Any Problem). Compatible With Any Cell Phone, Tablets, Ios, Android, Iphone, Samsung, Lenovo, Google, Sony, Lg, Htc, Tcl, Xiaomi, Huawei, Honor, Oneplus, Motorola, Iphone 14, 14 Plus, 14 Pro, 14 Pro Max, Iphone 13 Series, 12, 12 Pro Max, 11, Xs, Xr, X, Se, Etc..
【Note】(1) Please Wait 24 Hours To Ensure That The Sticker Has The Optimal Adhesion After Stuck. (2) Please Do Not Stick The Clear Protective Film Or 3M Adhesive To Silicone, Highly Textured, And Soft Case. (3) Make Ensure The Desired Surface Is Wiped And Dry. (4) Do Not Touch The Adhesive Gel Directly With Hands. (5) Each 3M Vhb Rubber Adhesive Is For One-Time Use..
【High Stickiness】Super Double-Sided Polygon Cellphone Wallet Replacement Adhesion Strip's Stickiness Is 40% Stronger Than Original 2 Sided Tape Sticky Glue, And It Is High Temperature Resistance(120℃+). They Are Sturdy And Durable, And Repositionable Features Bring Convenience To Your Mobile Phone Wallet Usage..
Brand: pop-tech | Manufacturer: pop-tech
Dimensions: 0.59 x 4.13 x 2.60 inches | Weight: 0.06 Pounds
See On Amazon #19
Tryone Metal Plate for Magnetic Car Mount 4 Pack Disc with 3M Adhesive Compatible with Phone Magnets/Cell Phone Automobile Magnet Cradles, No Logo or Hole, 2 Rectangle 2 Round, Black&Silver
Asin: B01LZAYD8X | Model: CA-TO-39 | PartNumber: CA-TO-39 | Ean: 0191869248525, 0190073270902 | UPC: 191869248525, 190073270902
Features
- Statement: These plates don't have any magnet. They are just replacements compatible with magnetic car mounts.
- Package: 4 pack. Black X2(1 rectangle and 1 round). Silver X2(1 rectangle and 1 round).
- Dimension: The black rectangle is 2.56 X 1.77 ; The silver rectangle is 1.97 X 1.5 ; The round ones diameter is 1.57 .
- Compatibility: Fit for all kinds of magnetic car mount holders.
- Usages: Stick to the back of your phone or put it between your phone and the case. Strong adhesive has been pre-applied on one side of the metal plate.
- See more on Amazon...
【Dimension:】The Black Rectangle Is 2.56” X 1.77”; The Silver Rectangle Is 1.97” X 1.5”; The Round Ones’ Diameter Is 1.57”..
【Usages:】Stick To The Back Of Your Phone Or Put It Between Your Phone And The Case. Strong Adhesive Has Been Pre-Applied On One Side Of The Metal Plate..
【Compatibility:】Fit For All Kinds Of Magnetic Car Mount Holders..
【Package:】4 Pack. Black X2(1 Rectangle And 1 Round). Silver X2(1 Rectangle And 1 Round)..
Brand: Tryone | Manufacturer: Tryone Direct
Dimensions: 0.30 x 6.20 x 5.50 inches
See On Amazon #20
VizGiz 4 Pack Mount Metal Plate for Magnetic Car Mount Vehicle Air Vent Dashboard Holder Cradle Strong Adhesive Sticker Replacement Magnet Patch Universal Circular Disc for Mobile Phone GPS MP4
Asin: B08SLM8KQ6 | Ean: 0796862621933 | UPC: 796862621933
Features
- Note: (1)That's just metal plate,not a magnet. (2)The metal plate itself not with magntic.specially used for magntic phone holder.
- Package included: 4 Round Plate ( 4 Colors: Black, Silver, Rose Gold & Gold )
- Replace magnet plate perfectly and work along with universal magnetic smartphone holder, magnetic air vent mount and dashboard magnet car mount.
- The metal sheet is extremely thin so that it can be hidden inside of phone case without adding bulk. 0.1cm/ 0.039 thick
- Provide you 4 color options to apply on multiple color mobile phones. Color perfect matches Apple iPhone 6S, 7, 7Plus, 8, 8Plus Black, Rose Gold and Gold
- Simply stick this metal disc onto the back of your phone or put it between cellphone and its phone case. NOTE For phone case thicker than 1mm, please stick it on the outside of the case to avoid interference with magnetism.
- Applied with strong adhesive sticker on the back, phone mount plate sticks on your phone back firmly and securely. No worry of falling off. NOTE After you stick the metal plate, please wait for 24 hours before using to make sure it sticks firmly.
- See more on Amazon...
Replace Magnet Plate Perfectly And Work Along With Universal Magnetic Smartphone Holder, Magnetic Air Vent Mount And Dashboard Magnet Car Mount..
Applied With Strong Adhesive Sticker On The Back, Phone Mount Plate Sticks On Your Phone Back Firmly And Securely. No Worry Of Falling Off. ★Note★ After You Stick The Metal Plate, Please Wait For 24 Hours Before Using To Make Sure It Sticks Firmly..
Provide You 4 Color Options To Apply On Multiple Color Mobile Phones. Color Perfect Matches Apple Iphone 6S, 7, 7Plus, 8, 8Plus Black, Rose Gold And Gold.
Simply Stick This Metal Disc Onto The Back Of Your Phone Or Put It Between Cellphone And Its Phone Case. ★Note★ For Phone Case Thicker Than 1Mm, Please Stick It On The Outside Of The Case To Avoid Interference With Magnetism..
The Metal Sheet Is Extremely Thin So That It Can Be Hidden Inside Of Phone Case Without Adding Bulk. 0.1Cm/ 0.039" Thick.
Package Included: 4 Round Plate ( 4 Colors: Black, Silver, Rose Gold & Gold ).
Brand: VizGiz | Manufacturer: VizGiz
See On Amazon #21
Very High Bond Sticky Adhesive, AZXYI 9 Pack Adhesive Replacement for Socket Base, 1.4 inches Double Sided Sticker Tapes for Phone Collapsible Grip & Stand Base
Asin: B07SQR2TNT | Model: AZXYI-9A | PartNumber: AZXYI-9A | Ean: 0662225062937 | UPC: 662225062937
Features
- 9Pcs Sticky Adhesives Replacement AZXYI offers 9 Pcs adhesive pads(Diameter: 1.4 inches) compatible with socket base, double-side pressure sensitive for attaching socket back to your cellphone.
- Easy to Use To maximize adhesive contact, please clean the adhesive surface before use and let it dry, free of contaminates. And wait at least 24 hours to use after stuck. First peel off the white side of the adhesive and stick it to the collapsible grip base. After applying some pressure on the adhesive, peel off the red film side of the adhesive and stick the collapsible grip to your phone case.
- Very High Bond These high-strength, double-sided adhesive pads let you quickly and easily create a long-lasting bond attaching various substrates/surfaces, stable even in bumpy roads and actually builds strength over time.
- Genuine Adhesive Pads The best sticky tapes for phone collapsible grip we provide is with high temperature resistance and stronger stickiness features. It resists heat and moisture, and protects adhesive surfaces against scratches, easy peels off without leaving any sticky residue behind.
- Durability These Double-sided stickers roll with pressure sensitive adhesive bonds almost instantly with no drying time.
- See more on Amazon...
【Very High Bond】These High-Strength, Double-Sided Adhesive Pads Let You Quickly And Easily Create A Long-Lasting Bond Attaching Various Substrates/Surfaces, Stable Even In Bumpy Roads And Actually Builds Strength Over Time..
【Durability】These Double-Sided Stickers Roll With Pressure Sensitive Adhesive Bonds Almost Instantly With No Drying Time..
【Genuine Adhesive Pads】The Best Sticky Tapes For Phone Collapsible Grip We Provide Is With High Temperature Resistance And Stronger Stickiness Features. It Resists Heat And Moisture, And Protects Adhesive Surfaces Against Scratches, Easy Peels Off Without Leaving Any Sticky Residue Behind..
【Easy To Use】To Maximize Adhesive Contact, Please Clean The Adhesive Surface Before Use And Let It Dry, Free Of Contaminates. And Wait At Least 24 Hours To Use After Stuck. First Peel Off The White Side Of The Adhesive And Stick It To The Collapsible Grip Base. After Applying Some Pressure On The Adhesive, Peel Off The Red Film Side Of The Adhesive And Stick The Collapsible Grip To Your Phone Case..
Brand: AZXYI | Manufacturer: AZXYI
Dimensions: 0.03 x 1.38 x 1.38 inches | Weight: 0.02 Pounds
See On Amazon #22
volport Metal Plate for Phone Magnet, 10 Pack MagicPlate with 3M Adhesive Replacement for Magnetic Phone Car Mount Holder & Cradle & Stand (Vent/CD/Windshield/Dashboard) - Rectangle and Round
Asin: B01DKEXMVG | Model: VM0004US | PartNumber: VM0004US | Ean: 0607569677782 | UPC: 607569677782
Features
- This extra strength car magnet metal plate with 3m glue double-sided adhesive mat is attachable to use with automotive magnetic mobile phone car mount, magnetic air vent mount, other magnetic cellphone car mount, magicmount, wall mount and magnet phone carrier for car gps navigation. Variety of replacement metal plates stuff for adjustable magnetic cell phone holder. Packet of black steel plates sheets are just METAL included clear protective liner WITHOUT MAGNETISM.
- 4 pack wide replacement strip & ferrous 6 pack circle rust-free round magnet mount plates sticking with strong 3m adhesive backing attraction - universal 8 pack square shaped metal plates & spare 40mm circles metal disks. Powerful and detachable rectangular thin mettel plate for holding up cell phones is compatible with iphone 15 pro max iphone 15 pro iphone 15 plus iphone 15 iphone 14 pro max iphone 14 pro iphone 14 mini iphone 13 pro max iphone 13 mini iphone 13 iphone xs max iphone xr tablet.
- Ultra thin metallic plate pieces and add no perceptible bulky works for backed your phone attachment or inner silicone case or portable monitor or navigation device. Thick phone mount plate disc sticks and holds up for laminated cell phone magnets disk piece and adhesive plates allows you to place on smartphone horizontal or vertical. Heavy duty large disk matt magic plate dots is a great replacement kits for tractor vehicle caravans suv truck to clip on the backer of multiples smart phones.
- Durable and stainless 8 pack skinny metal strap tag console attached with both side self adhesive fit for cell phone magnet patch and additional circular 2 pack extra small iron metal plates panel inserts with sticky pad part as backups. You can replace the multipack anti scratch extra tiny metal plates. These car mount magnet plates with removable 3m double sided tape are also great additions replacement kit parts fixed for rear various heavy phone cases.Just simple peel and stick!
- Big metal mounting plate with no hole along with universal replaceable magnetic mounts for magnets devices, cameras, light monitors, kitchen, livingroom chair, emergency light, desktop, dashboard, vents, cd slot, suction power, magic mount, desk, windshield or windows. Volport metal plates is a little bigger and thicker than others normal plates that's just for better holding. For wireless charging, please place the friendly metal plate built in adhesion on the phone away from charging sensor.
- See more on Amazon...
Ultra Thin Metallic Plate Pieces And Add No Perceptible Bulky Works For Backed Your Phone Attachment Or Inner Silicone Case Or Portable Monitor Or Navigation Device. Thick Phone Mount Plate Disc Sticks And Holds Up For Laminated Cell Phone Magnets Disk Piece And Adhesive Plates Allows You To Place On Smartphone Horizontal Or Vertical. Heavy Duty Large Disk Matt Magic Plate Dots Is A Great Replacement Kits For Tractor Vehicle Caravans Suv Truck To Clip On The Backer Of Multiples Smart Phones..
Big Metal Mounting Plate With No Hole Along With Universal Replaceable Magnetic Mounts For Magnets Devices, Cameras, Light Monitors, Kitchen, Livingroom Chair, Emergency Light, Desktop, Dashboard, Vents, Cd Slot, Suction Power, Magic Mount, Desk, Windshield Or Windows. Volport Metal Plates Is A Little Bigger And Thicker Than Others Normal Plates That's Just For Better Holding. For Wireless Charging, Please Place The Friendly Metal Plate Built In Adhesion On The Phone Away From Charging Sensor..
Durable And Stainless 8 Pack Skinny Metal Strap Tag Console Attached With Both Side Self Adhesive Fit For Cell Phone Magnet Patch And Additional Circular 2 Pack Extra Small Iron Metal Plates Panel Inserts With Sticky Pad Part As Backups. You Can Replace The Multipack Anti Scratch Extra Tiny Metal Plates. These Car Mount Magnet Plates With Removable 3M Double Sided Tape Are Also Great Additions Replacement Kit Parts Fixed For Rear Various Heavy Phone Cases.Just Simple Peel And Stick!.
4 Pack Wide Replacement Strip & Ferrous 6 Pack Circle Rust-Free Round Magnet Mount Plates Sticking With Strong 3M Adhesive Backing Attraction - Universal 8 Pack Square Shaped Metal Plates & Spare 40Mm Circles Metal Disks. Powerful And Detachable Rectangular Thin Mettel Plate For Holding Up Cell Phones Is Compatible With Iphone 15 Pro Max Iphone 15 Pro Iphone 15 Plus Iphone 15 Iphone 14 Pro Max Iphone 14 Pro Iphone 14 Mini Iphone 13 Pro Max Iphone 13 Mini Iphone 13 Iphone Xs Max Iphone Xr Tablet..
Brand: volport | Manufacturer: volport
Dimensions: 0.12 x 3.94 x 2.36 Inches | Weight: 0.19 Pounds
See On Amazon #23
Weewooday 18 Pcs Phone Magnet Car Metal Plate Round Magnetic Car Mount Holder with Adhesive for Phone Magnet, Magnetic Mount, Car Mounts Replacement Sticker, Mandala Style
Asin: B09KZK11L4
Features
- Diverse styles: you will receive 18 pieces of thin magnetic phone mount plates in total, which are designed with 9 different delicate mandala patterns, and 2 pieces per pattern; Enough quantity and styles for your daily uses and replacement needs
- Universal compatibility: these metal magnet mounting plates can be compatible with most devices, you can use them together with universal magnetic smartphone holders, magnetic air vent mounts, and dashboard magnet car mounts, which are suitable as replacement plates for a strong secure grip
- Easy to use: you can gently peel off the film on both sides of the round mount metal plate, please make sure the target surface is clean and smooth before using, then directly paste it on the place you want, which is simple and convenient
- Ultra thin design: each flower mount metal plate only measures around 0.6 mm in thickness, which can be easily attached and minimize bulkiness for your phones; With a smooth surface, it is comfortable to use, can bring you a good user experience
- Good adhesion: each mandala mount metal plate has sticky adhesive, which makes it easy to be pasted on the back of your phone or phone case, allowing you to fix your phone on the car mount easier and securer even on the bumpiest of roads, bring much convenience
- See more on Amazon...
Easy To Use: You Can Gently Peel Off The Film On Both Sides Of The Round Mount Metal Plate, Please Make Sure The Target Surface Is Clean And Smooth Before Using, Then Directly Paste It On The Place You Want, Which Is Simple And Convenient.
Good Adhesion: Each Mandala Mount Metal Plate Has Sticky Adhesive, Which Makes It Easy To Be Pasted On The Back Of Your Phone Or Phone Case, Allowing You To Fix Your Phone On The Car Mount Easier And Securer Even On The Bumpiest Of Roads, Bring Much Convenience.
Ultra Thin Design: Each Flower Mount Metal Plate Only Measures Around 0.6 Mm In Thickness, Which Can Be Easily Attached And Minimize Bulkiness For Your Phones; With A Smooth Surface, It Is Comfortable To Use, Can Bring You A Good User Experience.
Universal Compatibility: These Metal Magnet Mounting Plates Can Be Compatible With Most Devices, You Can Use Them Together With Universal Magnetic Smartphone Holders, Magnetic Air Vent Mounts, And Dashboard Magnet Car Mounts, Which Are Suitable As Replacement Plates For A Strong Secure Grip.
Brand: Weewooday | Manufacturer: Weewooday
Weight: 0.15 Pounds
See On Amazon #24
8-Pack Replacement Mount Metal Plates D.Sking Car Phone Holder Iron Plates for Car Mount Car Kits (8-Pack Black)
Asin: B07GWX8W27 | Model: 4351484843 | PartNumber: 4351484843 | Ean: 6462819224567
Features
- METAL PLATE: We only sell metal plates,it just iron,not with magnet,the metal plate are use with all magnetic car mount holder(package not include mount holder))
- 3M ADHESIVE: Each metal plate has strong 3M adhesives tape, Easy to stick onto the back of phone or case without a hassle
- COMPATIBILITY: All of the metal plates are not magnetic, we strongly recommend to use these metal plates along with universal magnetic mounts wherever you want
- NOTE: Metal plate may disable WIRELESS CHARGING, if you stick it on the back of the phone/case,Suggest to take the case off when use wireless charging
- Quantity: 8-Pack(4 Circle,4 Square,2 Cleaning wipe, 4 circle protetive film,4 square protetive film).
- See more on Amazon...
‖‖ Compatibility: All Of The Metal Plates Are Not Magnetic, We Strongly Recommend To Use These Metal Plates Along With Universal Magnetic Mounts Wherever You Want.
‖‖ Quantity: 8-Pack(4 Circle,4 Square,2 Cleaning Wipe, 4 Circle Protetive Film,4 Square Protetive Film)..
‖‖ Note: Metal Plate May Disable Wireless Charging, If You Stick It On The Back Of The Phone/Case,Suggest To Take The Case Off When Use Wireless Charging.
‖‖ 3M Adhesive: Each Metal Plate Has Strong 3M Adhesives Tape, Easy To Stick Onto The Back Of Phone Or Case Without A Hassle.
Brand: D.Sking | Manufacturer: D.Sking
Weight: 0.09 pounds
See On Amazon #25
Cell Phone Metal Stickers 1.2 inch for Magnetic Car Mount. Replacement Set of 32 Mini Magnet Metal Plates. Silver Car Sticky Small Round Iron Discs with 3M Adhesive Backing for Case, DIY, Crafts.
Asin: B0CJZLJVWR | Model: Pack of 32 Mini Metal Plates 1.2 inch | PartNumber: Pack of 32 Mini Metal Plates 1.2 inch | Ean: 0645492548670 | UPC: 645492548670
Features
- REPLACEMENT BLACK METAL STICKER SET 32 PACK is perfectly matched with phone back case. Circular iPhone metal plates are not magnets - work ONLY with magnetic car mount, air vent phone holder and houshold magnets for crafts - there is no magnetism inside the phone case adhesive flat circles.
- THIN STICKY METAL PLATE FOR PHONE MAGNET | Phone magnetic mount metal plates stick on your phone case back firmly and securely with 3m adhesive backing. Metal plates for magnetic car mount have a small thickness, so they can be glued between the back cover of the phone and the case.
- CELL PHONE CASE LARGE METAL PLATES for magnet mount is 0.02 / 0.5 mm thickness, 1.2 / 30 mm diameter. The surface of the cute matte round metal sticker for magnetic phone holder with no sharp edges would not damage your fingers and mobile phone.
- BLACK MATTE PHONE METAL STICKER FOR MAGNET: Metal plates for magnetic car mount have a small thickness, so they can be glued between the back battery cover of the phone and the case, directly to your gadget or onto cellphone case.
- UNIVERSAL STICK ON PHONE MAGNET METAL PLATES with brushed black color match iPhone, iPad, Samsung Galaxy Note and other smartphones or tablets with metallic colors. Self adhesive metal discs compatible with all types of magnetic mounts and household magnets.
- IF THE STRENGTH OF MAGNETISM IS NOT ENOUGH - use 2 metal plates together to make a double steel sheet. This method will increase the thickness of the metal, which will increase the suction force of the magnet.
- See more on Amazon...
Cell Phone Case Large Metal Plates For Magnet Mount Is 0.02" / 0.5 Mm Thickness, 1.2" / 30 Mm Diameter. The Surface Of The Cute Matte Round Metal Sticker For Magnetic Phone Holder With No Sharp Edges Would Not Damage Your Fingers And Mobile Phone..
Universal Stick On Phone Magnet Metal Plates With Brushed Black Color Match Iphone, Ipad, Samsung Galaxy Note And Other Smartphones Or Tablets With Metallic Colors. Self Adhesive Metal Discs Compatible With All Types Of Magnetic Mounts And Household Magnets..
If The Strength Of Magnetism Is Not Enough - Use 2 Metal Plates Together To Make A Double Steel Sheet. This Method Will Increase The Thickness Of The Metal, Which Will Increase The Suction Force Of The Magnet..
Black Matte Phone Metal Sticker For Magnet: Metal Plates For Magnetic Car Mount Have A Small Thickness, So They Can Be Glued Between The Back Battery Cover Of The Phone And The Case, Directly To Your Gadget Or Onto Cellphone Case..
Thin Sticky Metal Plate For Phone Magnet | Phone Magnetic Mount Metal Plates Stick On Your Phone Case Back Firmly And Securely With 3M Adhesive Backing. Metal Plates For Magnetic Car Mount Have A Small Thickness, So They Can Be Glued Between The Back Cover Of The Phone And The Case..
Brand: SALEX | Manufacturer: SALEX
Dimensions: 0.02 x 1.18 x 1.18 inches | Weight: 0.01 Pounds
See On Amazon #26
Mobile Phone Replacement Spare Parts for TCL 20 Pro 5G Battery Back Cover(Black)
Asin: B0CHDPB3H3 | Ean: 0040009551691 | UPC: 040009551691
Features
- Professional Installation Mobile Phone LCD Screen Are Fragile Products And Must Be Professionally Installed By Professionals
- Reliable Quality Each Mobile Phone Repair Spare Part Has Been Inspected And Maintained In Good Quality Before Shipment
- Mobile Phone Accessories Please Confirm Your Phone Model Before Buying
- Mobile Phone Replacement Spare Parts for TCL 20 Pro 5G Battery Back Cover(Black)
- See more on Amazon...
【Mobile Phone Accessories】 Please Confirm Your Phone Model Before Buying.
Mobile Phone Replacement Spare Parts For Tcl 20 Pro 5G Battery Back Cover(Black).
【Reliable Quality】 Each Mobile Phone Repair Spare Part Has Been Inspected And Maintained In Good Quality Before Shipment.
Manufacturer: CHENYANENY Cell Phone Spare Parts
Weight: 0.22 Pounds
See On Amazon #27
DSTELIN Smartphones Metal Plate 12 Pack for Phone Car Mount Holder Cradle with 3M Adhesive (Compatible with Magnetic Mounts) - 6 Rectangle and 6 Round, Black
Asin: B07CJ1SPY7 | Model: 4351485015 | PartNumber: 4351485015 | Ean: 0705020241173 | UPC: 705020241173
Features
- Universal metal plate: Easy to use with all magnetic car mount holder
- Package includes: Rectangle - 1.8 x 2.6 (6Pcs) ; Round one's diameter - 1.6 ( 6Pcs)
- Strong adhesive: Each metal plate has strong adhesives tape, Easy to stick onto the back of phone or case without a hassle
- Wide compatibility: All of the metal plates are not magnetic, we strongly recommend to use these metal plates along with universal magnetic mounts wherever you want
- Important note: Metal plate may disable wireless charging, if you stick it on the back of the phone/case,Suggest to take the case off when use wireless charging
- See more on Amazon...
Strong Adhesive: Each Metal Plate Has Strong Adhesives Tape, Easy To Stick Onto The Back Of Phone Or Case Without A Hassle.
Important Note: Metal Plate May Disable Wireless Charging, If You Stick It On The Back Of The Phone/Case,Suggest To Take The Case Off When Use Wireless Charging.
Wide Compatibility: All Of The Metal Plates Are Not Magnetic, We Strongly Recommend To Use These Metal Plates Along With Universal Magnetic Mounts Wherever You Want.
Package Includes: Rectangle - 1.8" X 2.6" (6Pcs) ; Round One's Diameter - 1.6" ( 6Pcs).
First Available: 09/26/2018
Brand: DSTELIN | Manufacturer: Wit.J.Corn
Dimensions: 0.20 x 2.56 x 1.77 inches | Weight: 0.13 Pounds
Warranty: 1 YEAR WARRANTY
See On Amazon #28
Mobile Phone Replacement Battery Back Cover for OnePlus Nord N20 Battery Back Cover with Camera Lens Cover(Blue)
Asin: B0CRT4PQ9C | Ean: 8130014413625
Features
- Reliable Quality Each Mobile Phone Accessory Undergoes A Quality Inspection Before Shipping. It Is Safe To Purchase
- Prompt Please Check The Phone Model Before Purchasing The Battery Back Cover
- Mobile Phone Replacement Battery Back Cover for OnePlus Nord N20 Battery Back Cover with Camera Lens Cover(Blue)
- See more on Amazon...
Mobile Phone Replacement Battery Back Cover For Oneplus Nord N20 Battery Back Cover With Camera Lens Cover(Blue).
【Prompt】Please Check The Phone Model Before Purchasing The Battery Back Cover.
Brand: POLDE | Manufacturer: Lihuoxiu Phone Accessories
Weight: 0.22 Pounds
See On Amazon #29
Galaxy A52 Back Cover Replacement A525U A52 5G A526 Back Door for Samsung Galaxy A52 2020 6.5" A525F A525U Galaxy A52 SM-A526U Cellphone Backplates Rear Housing Repair Part (Awesome Black)
Asin: B09Q36GNRD | Ean: 0770887297380 | UPC: 770887297380
Features
- COMPATIBLE MODELS --- The A52 Back Cover Replacement Compatible With For Samsung Galaxy A52 2021 4G/LTE SM-A525F,SM-A525F/DS,SM-A525F/DST,SM-A525F/DSM,SM-A525F/N,SM-A525U.Also Fit for Samsung Galaxy A52 5G SM-A526B, SM-A526B/DS, SM-A5260, SM-A526W, SM-A526U, SM-A526U1 Too.The A52 Replacement Back Cover Include Back Camera Glass Lens and frame Replace.
- HIGH QUALITY --- The Galaxy A52 5G Replacement Back Cover fit A52 4G Back too, Brand New 100% Perfect fit For Samsung Galaxy A52 2021 6.5 A525F A525U A525U1 A525W A526U A526F A526M ,100% Tested Well Before Shipping Out.The A52 Replacement Rear Housing Come With Back Adhesive Replacement.
- ATTENTION --- The Galaxy A52 Back Replacement Cover Fit for Samsung Galaxy A52 2021 6.5 4G LTE A525 Back Cover Replacement. The Galaxy A52 5G Replacement Back Housing .Please Double Check Your Phone Model Before Buy The Galaxy A52 A525F Replacement Rear Cover.
- INSTALLATION --- This A52 Back Cover Replacement Don't Include The Repair Machine.Don't Include The Installation Instructions.Please Make Sure That You Can Replace it With Patient Before Buy The A52 2021 6.5 A525 Rear Door Replacement .Or You Can Replace it For Samsung A52 Battery Back Door Replacement In Your Local Cellphone Repair Shop.
- WHAT YOU GET --- Package Included: 1X For Samsung Galaxy A52 Back Cover Replacement A525F A525U A525M A526 Back Door With Back Door Replacement
- See more on Amazon...
★ Attention --- The Galaxy A52 Back Replacement Cover Fit For Samsung Galaxy A52 2021 6.5" 4G Lte A525 Back Cover Replacement. The Galaxy A52 5G Replacement Back Housing .Please Double Check Your Phone Model Before Buy The Galaxy A52 A525f Replacement Rear Cover..
★ What You Get --- Package Included: 1X For Samsung Galaxy A52 Back Cover Replacement A525f A525u A525m A526 Back Door With Back Door Replacement.
★ Installation --- This A52 Back Cover Replacement Don't Include The Repair Machine.Don't Include The Installation Instructions.Please Make Sure That You Can Replace It With Patient Before Buy The A52 2021 6.5" A525 Rear Door Replacement .Or You Can Replace It For Samsung A52 Battery Back Door Replacement In Your Local Cellphone Repair Shop..
★ High Quality --- The Galaxy A52 5G Replacement Back Cover Fit A52 4G Back Too, Brand New 100% Perfect Fit For Samsung Galaxy A52 2021 6.5" A525f A525u A525u1 A525w A526u A526f A526m ,100% Tested Well Before Shipping Out.The A52 Replacement Rear Housing Come With Back Adhesive Replacement..
Brand: Bestdealing | Manufacturer: Bestdealing
See On Amazon #30
Galundge Socket Wallet Adhesive, 9pcs Sticky Adhesive Replacement Kit for Socket Wallet Base, Cell Phone Wallet Socket Case Back Double-Sided Strips Tape for All Smartphone
Asin: B08SBZV4GJ | Ean: 0049500766566 | UPC: 049500766566
Features
- 9pcs Adhesive Replacement for Sockets Wallet GALUNDGE 9pcs double sided adhesive pads are designed for sockets wallet/ wallet plus/ wallet+ base, which attach socket wallet base to your smartphone perfectly. If your socket wallet+ base adhesive is not sticky enough, or you want to try a new phone case, you do not need to buy a new wallet. These sticky adhesive replacement can help to save your wallet's life.
- Very High Bond To maximize adhesive contact with adhesive, clean the adhered surface choosen ahead of time and socket wallet base, let them dry and free of contaminates. Please ensure that the required surface is clean and dry before applying the adhesive pads.
- Strong Sticky and Durability Galundge's adhesive replacement for socket wallet base can resist high temperatures up to 120 , and can maintain the best viscosity in high-temperature environments! Very High Bond adhesives are successfully compatible with collapsible Sockets Wallet for permanent and repositionable applications. Note: Don't stick the adhesive to LIQUID SILICONE, HIGHLY TEXTURED, and SOFT case.
- Easy to Install Clean up the socket wallet base and mounting surface. Peel off the white release film, stick the adhesive to the socket wallet base directly, and then peel off the other red side film and stick to phone back. Press down repeatedly to increase the contact of the adhesive with the substrate, and wait at least 24 hours to use for the better adhesion.
- What You Get Galundge 9pcs replacement stickers, We take care of all quality-related issues. Your satisfaction is our top priority and we provide a 100% Satisfaction Guarantee!
- See more on Amazon...
【Strong Sticky And Durability】Galundge's Adhesive Replacement For Socket Wallet Base Can Resist High Temperatures Up To 120℃, And Can Maintain The Best Viscosity In High-Temperature Environments! Very High Bond Adhesives Are Successfully Compatible With Collapsible Sockets Wallet For Permanent And Repositionable Applications. Note: Don't Stick The Adhesive To Liquid Silicone, Highly Textured, And Soft Case..
【 What You Get 】Galundge 9Pcs Replacement Stickers, We Take Care Of All Quality-Related Issues. Your Satisfaction Is Our Top Priority And We Provide A 100% Satisfaction Guarantee!.
【Easy To Install】Clean Up The Socket Wallet Base And Mounting Surface. Peel Off The White Release Film, Stick The Adhesive To The Socket Wallet Base Directly, And Then Peel Off The Other Red Side Film And Stick To Phone Back. Press Down Repeatedly To Increase The Contact Of The Adhesive With The Substrate, And Wait At Least 24 Hours To Use For The Better Adhesion..
【Very High Bond】To Maximize Adhesive Contact With Adhesive, Clean The Adhered Surface Choosen Ahead Of Time And Socket Wallet Base, Let Them Dry And Free Of Contaminates. Please Ensure That The Required Surface Is Clean And Dry Before Applying The Adhesive Pads..
Brand: Galundge | Manufacturer: GALUNDGE
See On Amazon
Looking For Something Else?
Search