Best 3D Printer Extruders - Buying Guide
Last Updated: 05/01/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
ELEGOO 3D Printer Extruder for Neptune 3 Pro/3 Plus/3 Max 3D Printer, Fully Assemble Dual-Gear Direct Drive Extruder, ELEGOO Official 3D Printer Accessories
Asin: B0C8NSBKY7 | Model: CA-EL-3D-NA02 | PartNumber: CA-EL-3D-NA02
Features
- Fully assembled extruder for Neptune 3 Pro/3 Plus/3 Max ONLY
- ELEGOO Official 3D Printer Accessories
- Premium customer service, contact us if you have any questions
- See more on Amazon...
Premium Customer Service, Contact Us If You Have Any Questions.
Elegoo Official 3D Printer Accessories.
Brand: ELEGOO | Manufacturer: ELEGOO
See On Amazon #2
Redrex Dual Gear Ender 3 Extruder with Nema 17 Stepper Motor Compatible with Creality Ender 3 V2,Ender 3 Pro,Ender 3 Neo,Ender 3 V2 Neo,Ender 3 Max Neo,Ender 5,Ender 7,CR6 SE,CR10 3D Printers
Asin: B09ZDQM6P6 | Model: RDX032P | PartNumber: RDX032P
Features
- Double Gear Extrusion Mechanism The filament is gripped by the dual drive much more firmly with less deformation, so it doesn't jam as much in the tube, nozzle or hotend.
- Upgraded Idler Gear Design This idler gear is upgraded with two washers on both sides, so the sharp gear will NOT ride against the bottom of the arm or chew it up.
- Application This all metal dual drive extruder with motor kit is compatible with Ender 3,Ender 3 V2,Ender 3 Pro,Ender 3 Neo,Ender 3 V2 Neo,Ender 3 Max Neo,Ender 5,Ender 5 Pro,Ender 5 Plus,CR10 Serie,Voxelab Aquila 3D printer.
- High Torque Motor The Nema 17 stepper motor provides 1A 40Ncm/57g.cm^2 in holding torque which helps to improve the motor's stability.Notice:for Non-Creality users,please swap the motor wire sequence to make it turn forward instead of reverse
- Kindly Reminder :Please calibrate the E-steps from 100 to 139; Please lubricate the gears before first use;for 3d printers with filament detector,please print the model to rise up the filament detector to make them at the same height;
- See more on Amazon...
【Application】This All Metal Dual Drive Extruder With Motor Kit Is Compatible With Ender 3,Ender 3 V2,Ender 3 Pro,Ender 3 Neo,Ender 3 V2 Neo,Ender 3 Max Neo,Ender 5,Ender 5 Pro,Ender 5 Plus,Cr10 Serie,Voxelab Aquila 3D Printer..
【Kindly Reminder】:Please Calibrate The E-Steps From 100 To 139; Please Lubricate The Gears Before First Use;For 3D Printers With Filament Detector,Please Print The Model To Rise Up The Filament Detector To Make Them At The Same Height;.
【High Torque Motor】The Nema 17 Stepper Motor Provides 1A 40Ncm/57G.Cm^2 In Holding Torque Which Helps To Improve The Motor's Stability.Notice:For Non-Creality Users,Please Swap The Motor Wire Sequence To Make It Turn Forward Instead Of Reverse.
【Upgraded Idler Gear Design】This Idler Gear Is Upgraded With Two Washers On Both Sides, So The Sharp Gear Will Not Ride Against The Bottom Of The Arm Or Chew It Up..
Brand: REDREX | Manufacturer: Redrex
Dimensions: 2.00 x 3.00 x 5.00 inches | Weight: 0.62 pounds
See On Amazon #3
Creality Upgrade Ender 3 Extruder, Ender 3 V2 Upgrades Metal Extruder Aluminum MK8 Bowden Extruder 40 Teeth Drive Gear for Ender 3 Pro/Ender 5 Pro/Ender 5 Plus/CR-10 Series 3D Printer
Asin: B07WHYBVJ5 | Ean: 6973298330811
Features
- Compatibility: This Upgraded 3d printer accessories is an original upgraded replacement part for Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 Max, Ender 5, Ender 5 Plus, Ender 5 Pro, CR-10, CR-10 V2, CR-10 Max, CR-10 S4, CR 10, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus, CR-X, CR 20, CR 20 Pro. It is also compatible with other 3D printers except the printers using a direct drive setup. No need to change stepper motors or other mounting hardware.
- Last Over Years. Made by high quality aluminum, last much longer your stock plastic or 3D printed extruder feeder drive.
- Work Better. It makes loading the filament easier and smoother, no worries about filament scraping or breaking.
- Fits 1.75mm filament. 40 Teeth drive gear compatible with PLA/ABS/Wood/TPU/PTEG. Please Note: Some printer models like Ender 3 and Edner 3 Pro, their original extrusion gears cannot be removed, so these model printers do not have to change the extrusion screw. Ender 3V2 its extrusion gear can be replaced.
- Easy to Install. This extruder DIY kit comes with an instruction of how to put it together, which makes it more easy to install.
- See more on Amazon...
Work Better. It Makes Loading The Filament Easier And Smoother, No Worries About Filament Scraping Or Breaking..
Easy To Install. This Extruder Diy Kit Comes With An Instruction Of How To Put It Together, Which Makes It More Easy To Install..
Fits 1.75Mm Filament. 40 Teeth Drive Gear Compatible With Pla/Abs/Wood/Tpu/Pteg. Please Note: Some Printer Models Like Ender 3 And Edner 3 Pro, Their Original Extrusion Gears Cannot Be Removed, So These Model Printers Do Not Have To Change The Extrusion Screw. Ender 3V2，Its Extrusion Gear Can Be Replaced..
Last Over Years. Made By High Quality Aluminum, Last Much Longer Your Stock Plastic Or 3D Printed Extruder Feeder Drive..
Brand: Comgrow | Manufacturer: Creality 3D
See On Amazon #4
0.4MM MK8 Ender 3 Nozzles 25 pcs 3D Printer Brass Nozzles Extruder for Makerbot Creality CR-10 with 5 Needles and Metal Storage Box (0.4mm)
Asin: B082PZG1RZ | Model: LM-G1RZ | PartNumber: LM-G1RZ | Ean: 0734830917633 | UPC: 734830917633
Features
- Parameter and Specifications: Input diameter 2.00mm, Output diameter 0.4 mm, out thread M6, Thread length 4mm; a set of 25pcs printer nozzles and 5 pcs stainless steel needles. And the outer surface is marked with a size, So you can easily identify the specifications of the nozzle.
- Applicability and Compatibility: Our nozzles fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer. Fit exactly like the original.
- Precision Process: Made with centering CNC precision automatic lathe and one-time forming technology, make sure the input and output holes are concentric and the interior of nozzle is smooth without burrs. Due to all of above, not only reduce the resistance, avoid filament getting stuck on nozzle, but also effectively guarantee the service life of the nozzle, make out of filament more smoother.
- Precise Design: Cutting with the diamond knife, make the contact surface more flat, so it reduces the risk of printhead leakage greatly and avoid nozzles clogging.
- Each of our kit only comes in a single size, so you can feel free mix and match!
- See more on Amazon...
Precision Process: Made With Centering Cnc Precision Automatic Lathe And One-Time Forming Technology, Make Sure The Input And Output Holes Are Concentric And The Interior Of Nozzle Is Smooth Without Burrs. Due To All Of Above, Not Only Reduce The Resistance, Avoid Filament Getting Stuck On Nozzle, But Also Effectively Guarantee The Service Life Of The Nozzle, Make Out Of Filament More Smoother..
Each Of Our Kit Only Comes In A Single Size, So You Can Feel Free Mix And Match!.
Precise Design: Cutting With The Diamond Knife, Make The Contact Surface More Flat, So It Reduces The Risk Of Printhead Leakage Greatly And Avoid Nozzles Clogging..
Applicability And Compatibility: Our Nozzles Fit For 3D Printer Makerbot Creality Cr-10, Mk8 Makerbot Reprap Prusa I3, Compatible With All 1.75Mm Pla Abs 3D Printer. Fit Exactly Like The Original..
Brand: Meafeng | Manufacturer: Meafeng
Dimensions: 3.94 x 3.94 x 3.94 inches
See On Amazon #5
Creality Official Extruder for Ender 3 3D Printer Aluminum Drive Feed Bowden Extruders Upgrade Accessories Kit for Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 Max, Ender-5 Series and CR-10 Series
Asin: B092HKZMQM | Model: 001 | PartNumber: 001 | Ean: 0752004597252 | UPC: 752004597252
Features
- Durable Material -- High quality aluminum alloy material and sandblast to surface oxidization, ensuring this red extruder is last for long term use!
- New Upgraded Design -- The upgraded red extruder has removed pneumatic joint so as to increase gear density, preventing the joint fracture between pneumatic joint and Teflon tube. What's more, you can adjust the gear pressure of extruder in time by adjusting bolts.
- Improved Performance -- The optimized extruder with metal extrusion and original hot-end kit pushes the filament into printer nozzle, greatly making the red extruder retain powerful in filament feed-in. And the beveled filament intake can prevent scraping the filament as it is pulled into the feeder.
- Install Easily -- You just remove the old Creality extruder & screw and then install the new red extruder. All the necessary accessories are included in the package.
- Wide Compatibility -- Red extruder is suitable for Creality 3d printers accessories: Ender-3 series, Ender-5 series, CR-10S, CR-10, CR-10mini, CR-10 S5, CR-10 S4.
- See more on Amazon...
✔️Improved Performance -- The Optimized Extruder With Metal Extrusion And Original Hot-End Kit Pushes The Filament Into Printer Nozzle, Greatly Making The Red Extruder Retain Powerful In Filament Feed-In. And The Beveled Filament Intake Can Prevent Scraping The Filament As It Is Pulled Into The Feeder..
✔️Wide Compatibility -- Red Extruder Is Suitable For Creality 3D Printers Accessories: Ender-3 Series, Ender-5 Series, Cr-10S, Cr-10, Cr-10Mini, Cr-10 S5, Cr-10 S4..
✔️Install Easily -- You Just Remove The Old Creality Extruder & Screw And Then Install The New Red Extruder. All The Necessary Accessories Are Included In The Package..
✔️New Upgraded Design -- The Upgraded Red Extruder Has Removed Pneumatic Joint So As To Increase Gear Density, Preventing The Joint Fracture Between Pneumatic Joint And Teflon Tube. What's More, You Can Adjust The Gear Pressure Of Extruder In Time By Adjusting Bolts..
Brand: Creality | Manufacturer: Creality
Dimensions: 6.38 x 0.63 x 3.50 inches | Weight: 0.13 pounds
See On Amazon #6
LAIHIFA 30PCS 3D Printer Nozzles, High Temperature&Wear Resistance, Better Thermal Conductivity Brass 3D Printer Nozzle 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm for MK8, Ender 3, Creality CR10
Asin: B0BNBHQJ9Z
Features
- GREAT VALUE: 30pcs 3D printer nozzles in 7 sizes. 0.2mmx4, 0.3mmx4, 0.4mmx6, 0.5mmx4, 0.6mmx4, 0.8mmx4, 1.0mmx4-sufficient quantity and great assortment for all your needs. 5pcs free cleaning needles for cleaning extruder nozzles. 1pc free wrench for installing and changing 3D printer nozzles.
- SUPER DURABILITY: 3D printer nozzles are made of high quality international standard brass which have better thermal conductivity, high temperature resistance, abrasive resistance. It can be used for a long time.
- PREMIUM QUALITY: High quality brass 3D printer nozzles are came with smooth surfaces and an apparently smooth interior finishing, high precision&perfect aperture, so they can prevent print head from leakage and allow for easy flow of the filament without clogging.
- UNIVERSAL COMPATIBILITY: 3D extruder nozzles are compatible with most 1.75mm PLA ABS 3D printers with external M6 thread on the market, suitable for 3D printers like Makerbot MK8, Creality CR10, Ender 3, etc.
- SPECIFICATION: 3D printer nozzle input diameter is 2mm, output diameters are 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm, out thread is M6, thread length is 5mm. The outer surface of nozzles is engraved with size, convenient for you to easily find and replace.
- See more on Amazon...
Premium Quality: High Quality Brass 3D Printer Nozzles Are Came With Smooth Surfaces And An Apparently Smooth Interior Finishing, High Precision&Perfect Aperture, So They Can Prevent Print Head From Leakage And Allow For Easy Flow Of The Filament Without Clogging..
Specification: 3D Printer Nozzle Input Diameter Is 2Mm, Output Diameters Are 0.2Mm, 0.3Mm, 0.4Mm, 0.5Mm, 0.6Mm, 0.8Mm, 1.0Mm, Out Thread Is M6, Thread Length Is 5Mm. The Outer Surface Of Nozzles Is Engraved With Size, Convenient For You To Easily Find And Replace..
Universal Compatibility: 3D Extruder Nozzles Are Compatible With Most 1.75Mm Pla Abs 3D Printers With External M6 Thread On The Market, Suitable For 3D Printers Like Makerbot Mk8, Creality Cr10, Ender 3, Etc..
Super Durability: 3D Printer Nozzles Are Made Of High Quality International Standard Brass Which Have Better Thermal Conductivity, High Temperature Resistance, Abrasive Resistance. It Can Be Used For A Long Time..
Brand: LAIHIFA | Manufacturer: LAIHIFA
See On Amazon #7
3D Printer Extruder for Ender 3 Dual Gear Filament Bowden Extruder, Aluminum Drive Feeder Upgrade Kit,Compatible with Creality Cr-10s Cr10s Pro Ender-3 Ender 3pro Ender 5 (Dual Gear Extruder)
Asin: B0CT8MHVN5
Features
- DUAL GEAR EXTRUDER :Double gear extrusion mechanism, high extrusion force, ensure smooth feeding and gives snappy retractions.
- STABLE AND DURABLE :Upgraded extruder kit made of aluminum alloy material, more stable and durable than the other plastic one while working.
- 3D PRINTER EXTRUDER REPLACEMENT KIT :Perfect extruder replacement kit for Creality 3D Printers CR-10/ CR-10S/ CR-10S Pro/ Ender 3/ Tornado, etc. Note:comes with all parts,you need to DIY,but it easy to install.
- 1.75mm FILAMENT ACCEPT :For 1.75mm Filament.Better pressure pushes the filament into the printer nozzle.
- Package Includes : 1 X Extruder Kit; Please See The Main Picture For Product Details, The Hot End Of The Extruder Contains All The Necessary Screws And Parts, If You Have Any Questions, Please Feel Free To Message Us!
- See more on Amazon...
⭐【3D Printer Extruder Replacement Kit】:Perfect Extruder Replacement Kit For Creality 3D Printers Cr-10/ Cr-10S/ Cr-10S Pro/ Ender 3/ Tornado, Etc. Note:Comes With All Parts,You Need To Diy,But It Easy To Install..
⭐Package Includes】: 1 X Extruder Kit; Please See The Main Picture For Product Details, The Hot End Of The Extruder Contains All The Necessary Screws And Parts, If You Have Any Questions, Please Feel Free To Message Us!.
⭐【1.75Mm Filament Accept】:For 1.75Mm Filament.Better Pressure Pushes The Filament Into The Printer Nozzle..
⭐【Stable And Durable】:Upgraded Extruder Kit Made Of Aluminum Alloy Material, More Stable And Durable Than The Other Plastic One While Working..
Brand: Xirbbo | Manufacturer: xirbbo
See On Amazon #8
Creality Official Ender 3 Extruder Upgrade Metal MK8 Bowden 3D Printer Parts for Ender-3 V2/Ender-3 Pro/Ender-3 Max CR-10/10S Gray Aluminum 1.75mm Filament 3D Printer Extruder Drive Feeder
Asin: B09LQKN5WG | Model: / | PartNumber: /
Features
- Quality Assurance 100% official all-metal 3D printer extruder. High quality aluminum alloy material and sandblast to surface oxidization, ensuring this gray extruder is last for long term use. Works better than original plastic stock extruder. Original Creality 3D printers accessories for Ender-3/Ender-3 Pro/Ender-3S/Ender-3 V2/Ender-3 Max/CR-10/CR-10S.
- Work Better Our 3d printer extruder kits have an adjustable bolt so that you can adjust the pressure of the extruder gear as needed. The extruder drive has better stronger pressure pushing the filament into the printer nozzle and so will improve the printer's performance. 40 Teeth drive gear feeds the 1.75mm filament, compatible with PLA/ABS/Wood/TPU/PTEG.
- Improved Performance The optimized extruder with metal extrusion and original hotend kit pushes the filament into the printer nozzle, greatly making the metal extruder retain power in filament feed-in. And the beveled filament intake can prevent scraping the filament as it is pulled into the feeder.
- Easy To Install DIY kit and you need to assemble by yourself. The full necessary screws & parts kit for the extruder is included. Referring to instructions or our 5th picture to install, it is very easy and straightforward to switch to this upgraded part on your machine.
- After Sales Support More than 20 engineers provide 24/7 customer service with 12-months limited and lifetime technical assistance. Please kindly contact us(seller) via ask a question find us directly cause our customer service will respond to you within 24 hours no matter what question.
- See more on Amazon...
🎈【Improved Performance】The Optimized Extruder With Metal Extrusion And Original Hotend Kit Pushes The Filament Into The Printer Nozzle, Greatly Making The Metal Extruder Retain Power In Filament Feed-In. And The Beveled Filament Intake Can Prevent Scraping The Filament As It Is Pulled Into The Feeder..
🎈【After Sales Support】More Than 20 Engineers Provide 24/7 Customer Service With 12-Months Limited And Lifetime Technical Assistance. Please Kindly Contact Us(Seller) Via “Ask A Question” Find Us Directly Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What Question..
🎈【Easy To Install】Diy Kit And You Need To Assemble By Yourself. The Full Necessary Screws & Parts Kit For The Extruder Is Included. Referring To Instructions Or Our 5Th Picture To Install, It Is Very Easy And Straightforward To Switch To This Upgraded Part On Your Machine..
🎈【Work Better】Our 3D Printer Extruder Kits Have An Adjustable Bolt So That You Can Adjust The Pressure Of The Extruder Gear As Needed. The Extruder Drive Has Better Stronger Pressure Pushing The Filament Into The Printer Nozzle And So Will Improve The Printer's Performance. 40 Teeth Drive Gear Feeds The 1.75Mm Filament, Compatible With Pla/Abs/Wood/Tpu/Pteg..
Brand: Creality | Manufacturer: Creality 3D
Dimensions: 2.56 x 4.33 x 3.15 Inches
See On Amazon #9
Creality Ender 3 /Pro/V2 3D Printer Assembled Extruder MK8 HotEnd Kit 24V with 0.4mm Nozzle Upgrade with Low Friction Creality-Capricorn Tubing
Asin: B07WNQP916 | Model: ENO-Ender3-Hotend-Bluetube | PartNumber: ENO-Ender3-Hotend-Bluetube | Ean: 0705300791497, 0198549003108 | UPC: 705300791497, 198549003108
Features
- It's 100% Creality Original and Creality-Capricorn PTFE Tubing.
- Upgrade with Low Friction Creality-Capricorn Original Teflon Tube 40CM.
- Hotend replacement parts suitable for ender 3, ender-3x, ender-3 pro, Ender 3 V2 3d printer.
- High Lubricity Additives make our XS Series tubing the lowest friction Bowden tubing on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills. Lower retraction means time saved every time the extruder retracts. Over the course of a print, a few milliseconds here and a few there add up to a lot of time saved.
- Creality-Capricorn tube is far superior to the white PTFE tubing supplied with most 3D printers. Its much smoother to feed filament through. And when printing it reduces the drag on the extruder giving a much smoother travel and print quality.
- See more on Amazon...
Hotend Replacement Parts Suitable For Ender 3, Ender-3X, Ender-3 Pro, Ender 3 V2 3D Printer..
Creality-Capricorn Tube Is Far Superior To The White Ptfe Tubing Supplied With Most 3D Printers. Its Much Smoother To Feed Filament Through. And When Printing It Reduces The Drag On The Extruder Giving A Much Smoother Travel And Print Quality..
High Lubricity Additives Make Our Xs Series Tubing The Lowest Friction Bowden Tubing On The Market. Less Friction Means More Responsiveness, Less Retraction, More Accurate Prints, Less Slippage, Wear, And Tear On The Extruder, And Less Clogging When Printing Chunky Filaments Such As Some Woodfills Or Ironfills. Lower Retraction Means Time Saved Every Time The Extruder Retracts. Over The Course Of A Print, A Few Milliseconds Here And A Few There Add Up To A Lot Of Time Saved..
Upgrade With Low Friction Creality-Capricorn Original Teflon Tube 40Cm..
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #10
3Dman Dual Drive Bowden Extruder Universal Geared Extruders for Ender 3 V2, Ender 3 Pro, Ender 3 Series, CR10 Series, Mega S, Tevo Tornado, Wanhao D9, Anet A8 E10, Prusa I3 and DIY 3D Printer
Asin: B08PBY4YDL | Ean: 0791738580222 | UPC: 791738580222
Features
- Dual Drive technology: This Bowden utilizes an internal gearing ratio of 3:1 together with precision cnc-machined hardened steel drive gears,which will minimize slippage and increase feeding strength.
- Fastening Spring Device: Bowden extruder allows the user to fine-tune the tightness with screw nut to fit with the most filament, such as PLA/ABS/ PETG/ TPU/NYLON/CARBON FIBER/WOOD.
- Reduction Gear Device: It can give out more torque,reduce the burden of the motor, extend the life of the motor.
- For Ender 3 V2, Ender 3 Pro, Ender 3 Series, Ender 5 Pro, Ender 5 Plus, CR10 Series, Anycubic Mega S, Tevo Tornado, Wanhao D9, Anet A8 E10, Prusa I3 and DIY 3D Printer.
- We recommend E-steps: 385. Any problem when you receive the order, CONTACT US FIRST please!
- See more on Amazon...
Reduction Gear Device: It Can Give Out More Torque,Reduce The Burden Of The Motor, Extend The Life Of The Motor..
We Recommend E-Steps: 385. Any Problem When You Receive The Order, Contact Us First Please!.
For Ender 3 V2, Ender 3 Pro, Ender 3 Series, Ender 5 Pro, Ender 5 Plus, Cr10 Series, Anycubic Mega S, Tevo Tornado, Wanhao D9, Anet A8 E10, Prusa I3 And Diy 3D Printer..
Fastening Spring Device: Bowden Extruder Allows The User To Fine-Tune The Tightness With Screw Nut To Fit With The Most Filament, Such As Pla/Abs/ Petg/ Tpu/Nylon/Carbon Fiber/Wood..
Brand: 3Dman | Manufacturer: 3Dman
See On Amazon #11
Creality Official K1/K1C Direct Drive Extruder Kit 3.0, Without Stepper Motor, Dual Gear Feeding Extrusion Support 1.75mm Filament Compatible with 3D Printers Ender 3 V3, K1C, K1, K1 Max
Asin: B0CKP6JPQK
Features
- Original Quality - 100% Creality Official 3D printer extruder. Specially designed for Creality K1C, K1, K1 Max and Ender 3 V3.
- Package - Only the dual gear feeding extrusion mechanism kit. Without the stepper motor.
- Dual Gear, Smooth Feeding - The dual-gear bite structure does not damage the filaments and ensures more reliable and stable feeding during printing.
- Easy to Install and Use - There is no need to dismantle the entire extrusion mechanism kit and reinstall the motor wire. After opening the back cover of the extruder, you only need to replace the extrusion part.
- Professional Support - To ensure your pleasant shopping experience, Creality has a professional customer service team to solve your problems. If you have any problems, please do not hesitate to contact us. We will provide friendly and fast customer service to solve your problem within 24 hours.
- See more on Amazon...
【Dual Gear, Smooth Feeding】 - The Dual-Gear Bite Structure Does Not Damage The Filaments And Ensures More Reliable And Stable Feeding During Printing..
【Professional Support】- To Ensure Your Pleasant Shopping Experience, Creality Has A Professional Customer Service Team To Solve Your Problems. If You Have Any Problems, Please Do Not Hesitate To Contact Us. We Will Provide Friendly And Fast Customer Service To Solve Your Problem Within 24 Hours..
【Easy To Install And Use】- There Is No Need To Dismantle The Entire Extrusion Mechanism Kit And Reinstall The Motor Wire. After Opening The Back Cover Of The Extruder, You Only Need To Replace The Extrusion Part..
【Package】- Only The Dual Gear Feeding Extrusion Mechanism Kit. Without The Stepper Motor..
Brand: Creality | Manufacturer: Creality 3D
Weight: 0.11 Pounds
See On Amazon #12
BIGTREETECH Dual Gear Extruder 3D Printer Extruders Double Gear mk8 extruder Dual Driver Feed for Creality Ender 3/5 Ender 3 V2 CR10S CR-10 Pro CR-10S 3D Printer 1.75mm Filament
Asin: B088WHBYY2 | Model: WGC000291 | PartNumber: WGC000291 | Ean: 0779288068322 | UPC: 779288068322
Brand: Ovenot | Manufacturer: BIGTREETECH Direct
See On Amazon #13
MakerBot Smart Extruder+ for Use with PLA Filament & Replicator+ & Mini Desktop 3D Printers, Improved Components, Enhanced Sensor System for Reliable Printing, Tested for 160,000+ Hours (MP07325)
Asin: B01A8DI9JM | Model: MP07325 | PartNumber: MP07325 | Ean: 0817913013412 | UPC: 817913013412
Features
- DEPENDABLE, CONSISTENT PERFORMANCE: The MakerBot Smart Extruder+ is a culmination of product design and 160,000+ hours of rigorous testing that delivers dependable, consistent 3D printing performance with superior results using MakerBot PLA filament
- COMPATIBILITY: This version of the Smart Extruder+ is compatible with the MakerBot Replicator+, Replicator Mini+, Replicator Z18, Replicator (5th Gen), and Replicator Mini 3D printers
- IMPROVED COMPONENTS: Engineered with improved components and an enhanced sensor system that features enhanced homing, better connectivity, as well as drastically reduced clogging and jams to ensure simple, reliable 3D printing from start to finish
- ABOUT MAKERBOT: MakerBot believes there's an innovator in everyone. As a global leader in desktop 3D printing, we set the standard in reliability and ease-of-use by providing effective solutions for every stage of the desktop 3D printing process. Since our start in 2009, we have also redefined what's possible for makers of all walks by introducing many industry firsts.
- 3D PRINTERS, MATERIALS AND SOFTWARE: Explore the MakerBot ecosystem for all your 3D printing needs including the METHOD, SKETCH and Replicator Series 3D printers, polymers, composites and metal filament materials and MakerBot CloudPrint
- See more on Amazon...
Improved Components: Engineered With Improved Components And An Enhanced Sensor System That Features Enhanced Homing, Better Connectivity, As Well As Drastically Reduced Clogging And Jams To Ensure Simple, Reliable 3D Printing From Start To Finish.
3D Printers, Materials And Software: Explore The Makerbot Ecosystem For All Your 3D Printing Needs Including The Method, Sketch And Replicator Series 3D Printers, Polymers, Composites And Metal Filament Materials And Makerbot Cloudprint.
About Makerbot: Makerbot Believes There's An Innovator In Everyone. As A Global Leader In Desktop 3D Printing, We Set The Standard In Reliability And Ease-Of-Use By Providing Effective Solutions For Every Stage Of The Desktop 3D Printing Process. Since Our Start In 2009, We Have Also Redefined What's Possible For Makers Of All Walks By Introducing Many Industry Firsts..
Compatibility: This Version Of The Smart Extruder+ Is Compatible With The Makerbot Replicator+, Replicator Mini+, Replicator Z18, Replicator (5Th Gen), And Replicator Mini 3D Printers.
Brand: MakerBot | Manufacturer: MakerBot
Dimensions: 2.00 x 6.50 x 4.50 inches | Weight: 0.90 pounds
Warranty: six (6) months from the date a new or refurbished Product is first delivered to the End-User after being purchased, on a non-recurring basis.
See On Amazon #14
FLASHFORGE Adventurer 5M Pro Entire Extruder Assembly, with 0.4mm High Flow 32mm /s Nozzle, Adventurer 5M Extruder, 3D Printer Part for Stable High-Speed Printing
Asin: B0CL2DKP1N
Features
- All-Metal Direct Extruder: Supporting a variety of materials, especially TPU and other flexible materials. Produce flawless, smooth, and seamless creations with no stringing. Elevate your creative projects with precision and perfection.
- 0.4mm High-Flow 32mm /s Nozzle It excels in material extrusion, providing robust support for high-speed printing. With a maximum temperature support of 280 C, it rapidly heats up to 200 C in just 35 seconds.
- Quick Detachable Nozzle: Patent-designed nozzle that can be detached in just 3 seconds without any tools. Simply press the clasp to remove the nozzle for easy. Note: Please disassemble the nozzle while the device is powered off.
- Dual Channel Cooling: Ensuring materials remain at their optimal printing temperature, swiftly cooling printed objects, effectively preventing stringing and warping, elevating print quality.
- Support Multiple Size Nozzle: Include four sizes: 0.25mm, 0.4mm, 0.6mm, and 0.8mm, expanding the capabilities of your 3D printer. With these choices, you could tailor your printing experience to meet different requirements, ensuring optimal printing results.
- See more on Amazon...
Quick Detachable Nozzle: Patent-Designed Nozzle That Can Be Detached In Just 3 Seconds Without Any Tools. Simply Press The Clasp To Remove The Nozzle For Easy. Note: Please Disassemble The Nozzle While The Device Is Powered Off..
Support Multiple Size Nozzle: Include Four Sizes: 0.25Mm, 0.4Mm, 0.6Mm, And 0.8Mm, Expanding The Capabilities Of Your 3D Printer. With These Choices, You Could Tailor Your Printing Experience To Meet Different Requirements, Ensuring Optimal Printing Results..
Dual Channel Cooling: Ensuring Materials Remain At Their Optimal Printing Temperature, Swiftly Cooling Printed Objects, Effectively Preventing Stringing And Warping, Elevating Print Quality..
0.4Mm High-Flow 32Mm³/S Nozzle： It Excels In Material Extrusion, Providing Robust Support For High-Speed Printing. With A Maximum Temperature Support Of 280°C, It Rapidly Heats Up To 200°C In Just 35 Seconds..
Brand: FLASHFORGE | Manufacturer: Zhejiang Flashforge 3D Technology Co., Ltd.
See On Amazon #15
ELEGOO Extruder for Neptune 4 Pro 3D Printer, Fully Assemble Dual-Gear Direct Drive Extruder, ELEGOO Official 3D Printer Accessories
Asin: B0CLRPRSNM | Model: CA-EL-3D-NA12 | PartNumber: CA-EL-3D-NA12
Features
- Fully assemble extruder for Neptune 4 Pro ONLY
- ELEGOO Official 3D Printer Accessories
- Premium customer service, contact us if you have any questions
- See more on Amazon...
Premium Customer Service, Contact Us If You Have Any Questions.
Elegoo Official 3D Printer Accessories.
Brand: ELEGOO | Manufacturer: ELEGOO
See On Amazon #16
Bigtreetech Upgrade Dual Gear Extruder, Double Gear MK8 Extruder 3D Printer Dual Driver Stock Feeder All Metal 1.75mm Filament Extruder Kit for CR-10S Pro/CR-10/ Ender 3 V2/Ender 3/Ender 3 Pro Series
Asin: B08D9CNHVN | Model: WGC000291 | PartNumber: WGC000291 | Ean: 0779303889987 | UPC: 779303889987
Features
- Upgraded Dual Extruder Dual gears and dual pneumatic combined extrusion structure, large extrusion force, enhanced feeding intensity, ensuring smooth feeding. The double gear rotation design locks the filament, which is beneficial to improve printing quality and reduce filament slipping, high-speed extrusion or retraction, better pressure to push the filament into the printer, less easy to lose steps, faster printing speed
- Compatibility Double gear mk8 extruder, perfect replacement for 3D printer CR-10/ CR-10S/ CR-10S Pro/ Ender 3 (initial version)/Ender 3 v2/Ender 3 pro/Ender 5/Tornado, etc. 1.75 mm filament (Set only for 3D printers with motor shafts exceeding 20mm, please measure the shaft length before placing an order.)
- Stable and Durable All metal aluminum alloy, high quality double gear extrusion, compared with ordinary plastic drive, this high aluminum metal filament extruder is stable and durable. The idler gear has been upgraded with a brass washer added between the stainless steel gear and the aluminum housing, so the gear does not collide seriously with the housing, which helps reduce stock extruder wear.
- Adjustable Spring The tension of the extrusion spring can be adjusted by tightening the screw, which greatly improves printing accuracy and paper feeding problems. Strong extrusion end spring enhances feeding strength and ensures stable pushing of filaments into the hot end of the printer. Suitable for most types of filament, such as ABS, PLA, TPU, PTEG etc.
- Imported Materials The 3d printer dual extruder material is made of brand new imported aviation aluminum material and processed by CNC imported from Japan. The kit does not include the stepper motor, motor bracket and instructions, we need to make them ourselves. If you need some installation help, there are video introductions online, and you can seek our technical help at any time.
- See more on Amazon...
💓【Stable And Durable】All Metal Aluminum Alloy, High Quality Double Gear Extrusion, Compared With Ordinary Plastic Drive, This High Aluminum Metal Filament Extruder Is Stable And Durable. The Idler Gear Has Been Upgraded With A Brass Washer Added Between The Stainless Steel Gear And The Aluminum Housing, So The Gear Does Not Collide Seriously With The Housing, Which Helps Reduce Stock Extruder Wear..
💓【Imported Materials】The 3D Printer Dual Extruder Material Is Made Of Brand New Imported Aviation Aluminum Material And Processed By Cnc Imported From Japan. The Kit Does Not Include The Stepper Motor, Motor Bracket And Instructions, We Need To Make Them Ourselves. If You Need Some Installation Help, There Are Video Introductions Online, And You Can Seek Our Technical Help At Any Time..
💓【Adjustable Spring】The Tension Of The Extrusion Spring Can Be Adjusted By Tightening The Screw, Which Greatly Improves Printing Accuracy And Paper Feeding Problems. Strong Extrusion End Spring Enhances Feeding Strength And Ensures Stable Pushing Of Filaments Into The Hot End Of The Printer. Suitable For Most Types Of Filament, Such As Abs, Pla, Tpu, Pteg Etc..
💓【Compatibility】Double Gear Mk8 Extruder, Perfect Replacement For 3D Printer Cr-10/ Cr-10S/ Cr-10S Pro/ Ender 3 (Initial Version)/Ender 3 V2/Ender 3 Pro/Ender 5/Tornado, Etc. 1.75 Mm Filament (Set Only For 3D Printers With Motor Shafts Exceeding 20Mm, Please Measure The Shaft Length Before Placing An Order.).
Brand: BIQU | Manufacturer: N-A
See On Amazon #17
ACROSSXD The Must-Have 3D Printing Tool 3D Printer Extruder Throat Cleaning NoClogger
Asin: B0CQV69295
Features
- Turn a half-hour repair into a 3-second push!
- The arrow tip of ACROSSXD is designed to match the end shape of the nozzle.
- Turn on and let hotend heat up to around 200 C firstly, then stick the throat piercing needle all the way down to extruder throat to push NoClogger down to clean your extruder completely.
- Well-designed: Injection molded handle for easy grip. Arrow tip with protector for safety of users.
- Our product packaging includes one throat piercing needle, five nozzle piercing needles, and one blade
- See more on Amazon...
Turn On And Let Hotend Heat Up To Around 200°C Firstly, Then Stick The Throat Piercing Needle All The Way Down To Extruder Throat To Push Noclogger Down To Clean Your Extruder Completely..
Our Product Packaging Includes One Throat Piercing Needle, Five Nozzle Piercing Needles, And One Blade.
Well-Designed: Injection Molded Handle For Easy Grip. Arrow Tip With Protector For Safety Of Users..
The Arrow Tip Of Acrossxd Is Designed To Match The End Shape Of The Nozzle..
Brand: ACROSSXD | Manufacturer: ACROSSXD
Weight: 0.22 Pounds
See On Amazon #18
BIQU H2 V2S Dual Gear Extruder Upgrade H2 Extruder 3D Printer Direct Extruder 1.75mm Filament BIQU BX Creality Ender & CR Series Printers, Anycubic Mega S, Geeetech Printers and Prusa I3 DIY Kits
Asin: B09FZ5S63R | Model: H2 extruder V2 | PartNumber: H2 extruder V2
Features
- Lightweight & Wide Compatibility: BQIU H2 V2S, 195g lightweight design, smaller inertia, more accurate positioning, higher printing accuracy, than the ordinary 300g extruder on the market. 34% lighter at launch. Widely compatible with BIQU B1, BIQU BX, Ender-3, Voron2.4, Voron V0, Vzbot 3d printer, etc.
- Adjustable Filament Loading Tension: Simply rotate the tension screw to accommodate different filaments, improve the printing success rate, improve the printing performance of flexible filaments, compatible with most filaments on the market, such as: ABS/PLA/PVA/HIPS/PET/ PET etc.
- Dual Gear Feeding: H2 V2S extruder, powerful extrusion system, dual gear and a gear ratio of 7:1 for exceptional pushing force, 770N extrusion force, ensuring smooth feeding and giving snappy retractions.
- Efficient Heat Dissipation & More Mounting Holes: The lightweight and wear-resistant aluminum alloy housing, high thermal conductivity heat sinks, and fan realize a better heat dissipation.4 screw mounting holes are available for installing an auto leveling sensor/cooling fan, which can achieve more Function.
- High Temperature Print & Good Printing Experience: Bi-metal heatbreak enables high-temp printing at 270 with silicone sock for insulation.Accurate Movements/Higher Movement Speed /Better Print Detail, Its young and personalized design is also enough to catch the attention of most 3D enthusiasts
- See more on Amazon...
💙Dual Gear Feeding: H2 V2s Extruder, Powerful Extrusion System, Dual Gear And A Gear Ratio Of 7:1 For Exceptional Pushing Force, 770N Extrusion Force, Ensuring Smooth Feeding And Giving Snappy Retractions..
💙High Temperature Print & Good Printing Experience: Bi-Metal Heatbreak Enables High-Temp Printing At 270℃ With Silicone Sock For Insulation.Accurate Movements/Higher Movement Speed /Better Print Detail, Its Young And Personalized Design Is Also Enough To Catch The Attention Of Most 3D Enthusiasts.
💙Efficient Heat Dissipation & More Mounting Holes: The Lightweight And Wear-Resistant Aluminum Alloy Housing, High Thermal Conductivity Heat Sinks, And Fan Realize A Better Heat Dissipation.4 Screw Mounting Holes Are Available For Installing An Auto Leveling Sensor/Cooling Fan, Which Can Achieve More Function..
💙Adjustable Filament Loading Tension: Simply Rotate The Tension Screw To Accommodate Different Filaments, Improve The Printing Success Rate, Improve The Printing Performance Of Flexible Filaments, Compatible With Most Filaments On The Market, Such As: Abs/Pla/Pva/Hips/Pet/ Pet Etc..
Brand: BIQU | Manufacturer: BIGTREETECH
Dimensions: 1.49 x 3.02 x 2.95 inches | Weight: 0.47 pounds
See On Amazon #19
Creality Ender 3 Aluminum Extruder, Ender 3 Metal Extruder, Ender 3 Pro Extruder Upgrade MK8 Drive Feed Bowden Extruders for Ender 3 Series, Creality CR-10 Series, Ender 5 Series
Asin: B079JZ374W | Model: ender 3 metal extruder | PartNumber: ender 3 metal extruder
Features
- UPGRADE: Right hand extruder kit - Perfect replacement for Creality 3D Printers ENDER3, ENDER5, CR-10 Series, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus. Upgrade your Creality 3D Printer Extruder with our New "Metal Anodised Aluminum" Upgrade Kit.
- STABLE and DURABLE: Full metal aluminum alloy, DIY kit and you need to assemble by yourself. Our MK8 extruder hotend include all the necessary screws & parts needed to directly replace your old original weak Creality plastic extruder.
- EASY TO INSTALL: All you do is unbolt the old original Creality plastic extruder & screw in the new Metal Extruder and ready to start printing. Used for 1.75mm filament of 3D printer MK8 bowden extruder frame.
- ADVANTAGES: The advantages of our extruder drive is you have better stronger pressure pushing the filament into the printer nozzle and so will improve on the printers performance. Our extruder kits have an adjustable bolt so that you can adjust the pressure of the extruder gear as needed.
- Trusted Vendor: CHPOWER is a TRUSTED VENDOR. Buy with confidence.
- See more on Amazon...
Easy To Install: All You Do Is Unbolt The Old Original Creality Plastic Extruder & Screw In The New "Metal Extruder" And Ready To Start Printing. Used For 1.75Mm Filament Of 3D Printer Mk8 Bowden Extruder Frame..
Trusted Vendor: Chpower Is A Trusted Vendor. Buy With Confidence..
Advantages: The Advantages Of Our Extruder Drive Is You Have Better Stronger Pressure Pushing The Filament Into The Printer Nozzle And So Will Improve On The Printers’ Performance. Our Extruder Kits Have An Adjustable Bolt So That You Can Adjust The Pressure Of The Extruder Gear As Needed..
Stable And Durable: Full Metal Aluminum Alloy, Diy Kit And You Need To Assemble By Yourself. Our Mk8 Extruder Hotend Include All The Necessary Screws & Parts Needed To Directly Replace Your Old Original Weak Creality Plastic Extruder..
Brand: CHPOWER | Manufacturer: CHPOWER
Weight: 0.13 pounds
See On Amazon #20
Micro Swiss Bowden Dual Gear Extruder Compatible with Creality Ender, CR10, CR-10 Pro, CR-10S, CR6-SE, Tornado
Asin: B09K1CNP6L | Model: M2714 | PartNumber: M2714 | Ean: 0769407528066 | UPC: 769407528066
Features
- Fits: Bowden extruder machines, Fits NEMA 17 size stepper motors
- Fits: Ender 3, 5, 6, CR10, CR-10s Pro, CR-10S, CR6-SE, Tornado
- Made in USA by Micro Swiss
- See more on Amazon...
Made In Usa By Micro Swiss.
Fits: Ender 3, 5, 6, Cr10, Cr-10S Pro, Cr-10S, Cr6-Se, Tornado.
Brand: Micro-Swiss | Manufacturer: Micro Swiss LLC
Dimensions: 1.40 x 3.50 x 2.50 Inches
See On Amazon #21
BIQU H2 V2S Extruder New Upgraded Dual Gear Extruder, Smooth Not Easy to Block 3D Printer Direct Extruder 1.75mm Suitable for Most FDM 3D Printers
Asin: B08SWGDTTV | Model: UUU001870 | PartNumber: UUU001870 | Ean: 0791759678328 | UPC: 791759678328
Features
- Upgraded Version of Stainless Steel Gear: using bimetallic tube (copper alloy + GRADE5 titanium alloy), high temperature resistance, durability, high precision, and higher surface finish. The output gear modulus design was changed from 0.5 to 0.25, reducing the gear outer diameter, effectively solving the weak points of V1.0 gear jamming and unsmooth extrusion.
- All-in-one Design & High Precision: The short-range extruder integrates the hot end of the nozzle, extruder, stepping motor, cooling fan, etc., double-gear extrusion, fast extrusion of consumables, short-range extrusion, short thread, and accuracy High, the control of the feeding amount is more accurate than remote extrusion, the withdrawal is more accurate, and the printing quality is better.
- With a smoothness of Ra0.4 on the inner walls of the throat and nozzle, it prevents clogging. H2 V2S uses a silicone protector with a high quality titanium-copper alloy hose for better heat dissipation and high temperature resistance, with printing temperatures of up to 270 C. The hose is easy to disassemble, making it even easier to use. Convenient.
- Lightweight & Compact & Powerful: BIQU H2 V2S extruder weighs only 195 grams, which effectively overcomes the short-stroke print head's heavier shortcomings, and is especially suitable for dual-jet printers. Using dual drive gears with internal gear ratio of 7:1, it has excellent performance and greater torque, reaching 770mN.m.
- Wide Compatibility: BIQU H2 V2S extruder has wide compatibility and can be installed in common 3D printers on the market, such as: BIQU B1, Ender 3(V2), Ender 6, CR-10S Pro, CR-10 V2/V3, Mega X, X1 Genius, etc. At the same time, you can also DIY according to your personal needs and update the corresponding firmware to meet your DIY needs.
- See more on Amazon...
✔️With A Smoothness Of Ra0.4 On The Inner Walls Of The Throat And Nozzle, It Prevents Clogging. H2 V2s Uses A Silicone Protector With A High Quality Titanium-Copper Alloy Hose For Better Heat Dissipation And High Temperature Resistance, With Printing Temperatures Of Up To 270°C. The Hose Is Easy To Disassemble, Making It Even Easier To Use. Convenient..
✔️Wide Compatibility: Biqu H2 V2s Extruder Has Wide Compatibility And Can Be Installed In Common 3D Printers On The Market, Such As: Biqu B1, Ender 3(V2), Ender 6, Cr-10S Pro, Cr-10 V2/V3, Mega X, X1 Genius, Etc. At The Same Time, You Can Also Diy According To Your Personal Needs And Update The Corresponding Firmware To Meet Your Diy Needs..
✔️Lightweight & Compact & Powerful: Biqu H2 V2s Extruder Weighs Only 195 Grams, Which Effectively Overcomes The Short-Stroke Print Head's Heavier Shortcomings, And Is Especially Suitable For Dual-Jet Printers. Using Dual Drive Gears With Internal Gear Ratio Of 7:1, It Has Excellent Performance And Greater Torque, Reaching 770Mn.M..
✔️All-In-One Design & High Precision: The Short-Range Extruder Integrates The Hot End Of The Nozzle, Extruder, Stepping Motor, Cooling Fan, Etc., Double-Gear Extrusion, Fast Extrusion Of Consumables, Short-Range Extrusion, Short Thread, And Accuracy High, The Control Of The Feeding Amount Is More Accurate Than Remote Extrusion, The Withdrawal Is More Accurate, And The Printing Quality Is Better..
Brand: BIQU | Manufacturer: BIQU
Dimensions: 1.50 x 3.04 x 3.02 Inches | Weight: 0.47 Pounds
See On Amazon #22
AOMUWKE 3D Printer Extruder Motor Kit for Kobra Plus, Double-Gear Bowden Extruder Upgrade Dual Drive Feeder and Stepper Motor Kit for Anycubic Kobra Plus, Kobra Max FDM 3D Printers
Asin: B0BG6T2B4X | Model: AMW-3D-031 | PartNumber: AMW-3D-031
Features
- Dual Gear Extrusion System: The extruder adopts dual metal gear extrusion system with stronger extrusion force, ensuring smooth feeding and fast retraction, reducing the chance of filament tangling, and compatible with PLA and flexible filaments.
- Adjustable Clamping Force: The extruder is equipped with an improved adjustment thumb screw, which can easily and conveniently adjust the clamping force of the filament to make the feeding smoother.
- Low Noise Stepper Motor: Adopt high-quality low noise extruder stepper motor with gear, which has the characteristics of high precision, good stability and durability.
- Easy Installation: The extruder and stepper motor are already assembled and can be used with a simple replacement, eliminating the tedious process of assembling the extruder and stepper motor.
- Compatible Models: This extruder motor kit is compatible with Anycubic Kobra Plus, Kobra Max FDM 3D Printers, compatible with 1.75mm PLA, ABS ,TPU and etc filament.
- See more on Amazon...
Low Noise Stepper Motor: Adopt High-Quality Low Noise Extruder Stepper Motor With Gear, Which Has The Characteristics Of High Precision, Good Stability And Durability..
Compatible Models: This Extruder Motor Kit Is Compatible With Anycubic Kobra Plus, Kobra Max Fdm 3D Printers, Compatible With 1.75Mm Pla, Abs ,Tpu And Etc Filament..
Easy Installation: The Extruder And Stepper Motor Are Already Assembled And Can Be Used With A Simple Replacement, Eliminating The Tedious Process Of Assembling The Extruder And Stepper Motor..
Adjustable Clamping Force: The Extruder Is Equipped With An Improved Adjustment Thumb Screw, Which Can Easily And Conveniently Adjust The Clamping Force Of The Filament To Make The Feeding Smoother..
Brand: AOMUWKE | Manufacturer: AOMUWKE
See On Amazon #23
LUTER 24PCS Extruder Nozzles 3D Printer Nozzles for MK8 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm with Free Storage Box for Makerbot Creality CR-10 Ender 3 5
Asin: B07L5KJB59
Features
- Premium Quality--MK8 nozzles are made of high quality brass material.Heavy duty and provide a long service life.Easy to install and change.
- Precise Design--3d printer nozzles can prevent print head from leakage effectively and produce consistent prints with smooth and glossy polish.Reduce the resistance from the corners and avoid blocking of the filament with rounded chamfer.Easy to identify with engraving the size on each nozzle.
- Applicability and Compatibility--MK8 extruder nozzles fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer. Fit exactly like the original.
- Package Include--Printer nozzles come with 24 pieces MK8 nozzles in 7 sizes(quantity x output diameter): 2 x 0.2mm, 2 x 0.3mm, 12 x 0.4mm, 2 x 0.5mm, 2 x 0.6mm, 2 x 0.8mm, 2 x 1.0mm,with a plastic box for storage.
- Parameter--Input diameter 1.75mm; output diameter 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm; Screw thread: M6;Hexagon diameter: 6 mm
- See more on Amazon...
Applicability And Compatibility--Mk8 Extruder Nozzles Fit For 3D Printer Makerbot Creality Cr-10, Mk8 Makerbot Reprap Prusa I3, Compatible With All 1.75Mm Pla Abs 3D Printer. Fit Exactly Like The Original..
Parameter--Input Diameter 1.75Mm; Output Diameter 0.2Mm, 0.3Mm, 0.4Mm, 0.5Mm, 0.6Mm, 0.8Mm, 1.0Mm; Screw Thread: M6;Hexagon Diameter: 6 Mm.
Package Include--Printer Nozzles Come With 24 Pieces Mk8 Nozzles In 7 Sizes(Quantity X Output Diameter): 2 X 0.2Mm, 2 X 0.3Mm, 12 X 0.4Mm, 2 X 0.5Mm, 2 X 0.6Mm, 2 X 0.8Mm, 2 X 1.0Mm,With A Plastic Box For Storage..
Precise Design--3D Printer Nozzles Can Prevent Print Head From Leakage Effectively And Produce Consistent Prints With Smooth And Glossy Polish.Reduce The Resistance From The Corners And Avoid Blocking Of The Filament With Rounded Chamfer.Easy To Identify With Engraving The Size On Each Nozzle..
Brand: LUTER | Manufacturer: LUTER
Dimensions: 0.63 x 2.95 x 2.17 Inches
See On Amazon #24
26PCS 3D Printer Extruder Nozzles Hardened Steel, Stainless Steel, Brass High Temperature Pointed Wear Resistant Nozzle 0.2 0.3 0.4 0.5 0.6 0.8 1.0 mm
Asin: B09WZXHRSY | Model: yydsljp010 | PartNumber: yydsljp010 | Ean: 0746197191526 | UPC: 746197191526
Features
- Premium Quality: MK8 nozzles are made of high quality Hardened Steel, Stainless steel and Brass.Heavy duty and provide a long service life.Easy to install and change.
- Package Include--Printer nozzles come with 25pieces MK8 nozzles in 7 sizes(quantity x output diameter): 3x 0.2mm, 3x 0.3mm, 8 x 0.4mm, 3 x 0.5mm, 3x 0.6mm, 3x 0.8mm, 3x 1.0mm,with 10PCS Cleaning Needles.
- Precise Design--3d printer nozzles can prevent print head from leakage effectively and produce consistent prints with smooth and glossy polish.Reduce the resistance from the corners and avoid blocking of the filament with rounded chamfer.Easy to identify with engraving the size on each nozzle.
- Applicability and Compatibility--MK8 extruder nozzles fit for 3D Printer Makerbot Creality CR-10, Anycubic, compatible with all 1.75mm PLA ABS 3D printer. Fit exactly like the original.
- Parameter: Input diameter 1.75mm; output diameter 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm; Screw thread: M6;Hexagon diameter: 6 mm.
- See more on Amazon...
Precise Design--3D Printer Nozzles Can Prevent Print Head From Leakage Effectively And Produce Consistent Prints With Smooth And Glossy Polish.Reduce The Resistance From The Corners And Avoid Blocking Of The Filament With Rounded Chamfer.Easy To Identify With Engraving The Size On Each Nozzle..
Parameter: Input Diameter 1.75Mm; Output Diameter 0.2Mm, 0.3Mm, 0.4Mm, 0.5Mm, 0.6Mm, 0.8Mm, 1.0Mm; Screw Thread: M6;Hexagon Diameter: 6 Mm..
Applicability And Compatibility--Mk8 Extruder Nozzles Fit For 3D Printer Makerbot Creality Cr-10, Anycubic, Compatible With All 1.75Mm Pla Abs 3D Printer. Fit Exactly Like The Original..
Package Include--Printer Nozzles Come With 25Pieces Mk8 Nozzles In 7 Sizes(Quantity X Output Diameter): 3X 0.2Mm, 3X 0.3Mm, 8 X 0.4Mm, 3 X 0.5Mm, 3X 0.6Mm, 3X 0.8Mm, 3X 1.0Mm,With 10Pcs Cleaning Needles..
Brand: POJECITY | Manufacturer: tongtuoljp100
See On Amazon #25
ELEGOO Neptune 3 Pro FDM 3D Printer with Auto Bed Leveling, Dual-Gear Direct Extruder, Dual Lead Screw Drive, Removable Capacitive Screen, 8.85x8.85x11in Large Printing Size
Asin: B0BJCQ59JS | Model: US-EL-3D-N3P | PartNumber: US-EL-3D-N3P
Features
- Overview of Neptune 3 Pro 225x225x280mm/8.85x8.85x11 inch market mainstream printing size can meet the needs of most users. With an STM32 motherboard, all axes of ELEGOO Neptune 3 Pro are driven by silent stepper motors for quieter and more precise movement during printing, which reduces the noise as low as 47-48dB. The easy-to-setup printer comes with the main components pre-assembled, as well as a complete tool kit for quick installation.
- Dual-Gear Direct Extruder The new dual-gear direct drive extruder is made of SUS303 high-quality stainless steel with a 3:1 reduction ratio and stronger extrusion force for smoother filament feeding and more stable & accurate printing, which greatly reduces nozzle clogging and under-extrusion issues, printing effect is better than Bowden extruder. Compatible with multiple filaments such as PLA, TPU, PETG, and ABS.
- Nozzle Kit for Better Printing Effect The nozzle kit contains a TC4 titanium alloy throat pipe, an aluminum alloy flat heat sink structure, and a brass nozzle.The widened aluminum heat sink paired with the front close-fitting efficient cooling fan for a better heat dissipation effect and lower the temperature of the throat pipe, thereby reducing the possibility of nozzle clogging.
- Smarter Printing Experience Auto mesh bed leveling adopts a non-contact high precision sensor to automatically scan 36 (6x6) points of the hotbed and collect data in real-time, and then adjust the Z-axis height to compensate for any irregularities and unevenness of the printing platform. (Only applicable to metal printing platforms) Smart resume printing: the printer will auto-pause when the filament runs out or breaks, and you can resume printing after a power outage.
- More Stable Printing The Z-axis with dual synchronized lead screws and dual-motor drive for more stable movement of the print head and higher printing accuracy, avoiding the printing deviation driven by a single Z-axis lead screw motor. The 4-wheel V-guide rail pulley is made of POM with more stable movement, low noise, wear resistance, and longer service life.
- See more on Amazon...
【Nozzle Kit For Better Printing Effect】The Nozzle Kit Contains A Tc4 Titanium Alloy Throat Pipe, An Aluminum Alloy Flat Heat Sink Structure, And A Brass Nozzle.The Widened Aluminum Heat Sink Paired With The Front Close-Fitting Efficient Cooling Fan For A Better Heat Dissipation Effect And Lower The Temperature Of The Throat Pipe, Thereby Reducing The Possibility Of Nozzle Clogging..
【More Stable Printing】The Z-Axis With Dual Synchronized Lead Screws And Dual-Motor Drive For More Stable Movement Of The Print Head And Higher Printing Accuracy, Avoiding The Printing Deviation Driven By A Single Z-Axis Lead Screw Motor. The 4-Wheel V-Guide Rail Pulley Is Made Of Pom With More Stable Movement, Low Noise, Wear Resistance, And Longer Service Life..
【Smarter Printing Experience】Auto Mesh Bed Leveling Adopts A Non-Contact High Precision Sensor To Automatically Scan 36 (6X6) Points Of The Hotbed And Collect Data In Real-Time, And Then Adjust The Z-Axis Height To Compensate For Any Irregularities And Unevenness Of The Printing Platform. (Only Applicable To Metal Printing Platforms) Smart Resume Printing: The Printer Will Auto-Pause When The Filament Runs Out Or Breaks, And You Can Resume Printing After A Power Outage..
【Dual-Gear Direct Extruder】The New Dual-Gear Direct Drive Extruder Is Made Of Sus303 High-Quality Stainless Steel With A 3:1 Reduction Ratio And Stronger Extrusion Force For Smoother Filament Feeding And More Stable & Accurate Printing, Which Greatly Reduces Nozzle Clogging And Under-Extrusion Issues, Printing Effect Is Better Than Bowden Extruder. Compatible With Multiple Filaments Such As Pla, Tpu, Petg, And Abs..
Brand: ELEGOO | Manufacturer: ELEGOO
Dimensions: 19.00 x 23.00 x 9.00 inches | Weight: 22.00 pounds
Warranty: 8 years manufacturer
See On Amazon #26
HICTOP Ender 3 Hotend Ender 3 Pro Hotend 24V 40W Full Assembled Extruder Kit Accessories with Silicone Cover for Ender 3, Ender 3 Pro 3D Printer
Asin: B08R77QLS1 | Model: extruder kit-ender 3 | PartNumber: extruder kit-ender 3 | Ean: 0649910011463 | UPC: 649910011463
Features
- 1 Ender 3 hotend, Plug and Play Ender 3 Pro Hotend, you do not need to cut it.
- 2 Compatible with Ender 3, Ender 3 Pro and similar 3D printer but not for ender 3 Neo.
- 3 There are 2 fans, fan covers, heat block, cooling block, nozzle, throat pipe, connector, teflon pipe, thermistor sensor, heating tube, screws, silicone cover, etc.
- 4 24V high speed fan, lose heat quickly and efficiently; nozzle and tube connect seamless, prevent material leaking and blocking.
- 5. Silicone Cover is provided to help keep temperatures on the Ender 3 hotend much more stable and this will result in higher print quality and consistency
- See more on Amazon...
3 There Are 2 Fans, Fan Covers, Heat Block, Cooling Block, Nozzle, Throat Pipe, Connector, Teflon Pipe, Thermistor Sensor, Heating Tube, Screws, Silicone Cover, Etc..
5. Silicone Cover Is Provided To Help Keep Temperatures On The Ender 3 Hotend Much More Stable And This Will Result In Higher Print Quality And Consistency.
4 24V High Speed Fan, Lose Heat Quickly And Efficiently; Nozzle And Tube Connect Seamless, Prevent Material Leaking And Blocking..
2 Compatible With Ender 3, Ender 3 Pro And Similar 3D Printer But Not For Ender 3 Neo..
Brand: HICTOP | Manufacturer: HICTOP
Dimensions: 3.15 x 5.50 x 4.69 inches | Weight: 0.37 pounds
See On Amazon #27
Micro Swiss Direct Drive Extruder for Creality CR-10 / Ender 3 Printers
Asin: B08CGN18KJ | Model: M2601 | PartNumber: M2601 | Ean: 0769407527656 | UPC: 769407527656
Features
- Fits: CR-10 / CR-10-S5 / CR-10-S4 / CR-10S / CR-10 MINI / CR-20 / CR-20 Pro / Ender 2 / Ender 3 / Ender 3 Pro
- Nozzle size: .4mm
- Filament size: 1.75mm
- Made in USA by Micro Swiss
- See more on Amazon...
Filament Size: 1.75Mm.
Made In Usa By Micro Swiss.
Nozzle Size: .4Mm.
First Available: 08/10/2020
Brand: Micro-Swiss | Manufacturer: Micro Swiss LLC
Dimensions: 0.39 x 0.39 x 0.39 inches
See On Amazon #28
Micro Swiss NG Direct Drive Extruder for Creality CR-10 / Ender 3 Printers (Drop in Upgrade, No modifican Required)
Asin: B0B1QPVR3X | Model: M3201 | PartNumber: M3201 | Ean: 0850041631004 | UPC: 850041631004
Features
- Drop in Direct Drive Extruder for CR-10 and Ender 3 Series. It is Fully Compatible with Creality CR-10 / CR-10s / Ender 3 / Ender 3 Pro / Ender 3 V2
- High Torque: 3:1 Gear ratio
- This kit comes with everything you need to upgrade your printer to a Direct Drive Extruder. It comes with 1x Master Extruder Assembly 1x Adaptation plate 1x Stepper motor 1x Fan Shroud 1x Custom extension cable 1x Hotend assembly and hardware kit.
- This extruder overcomes the shortcomings of all current counterparts on the market, to create an optimal printing experience for everyone. With the Bevel Gear design, we are able to achieve the industry shortest filament path (less than 41mm). The unique motor placement allows for highly compact, low overhang design. This further increases system rigidity.
- It is made in the USA by Micro Swiss in-house.
- See more on Amazon...
This Kit Comes With Everything You Need To Upgrade Your Printer To A Direct Drive Extruder. It Comes With 1X Master Extruder Assembly 1X Adaptation Plate 1X Stepper Motor 1X Fan Shroud 1X Custom Extension Cable 1X Hotend Assembly And Hardware Kit..
It Is Made In The Usa By Micro Swiss In-House..
This Extruder Overcomes The Shortcomings Of All Current Counterparts On The Market, To Create An Optimal Printing Experience For Everyone. With The Bevel Gear Design, We Are Able To Achieve The Industry Shortest Filament Path (Less Than 41Mm). The Unique Motor Placement Allows For Highly Compact, Low Overhang Design. This Further Increases System Rigidity..
High Torque: 3:1 Gear Ratio.
Brand: Micro-Swiss | Manufacturer: Micro Swiss
Dimensions: 2.62 x 4.75 x 4.75 inches
See On Amazon #29
BMG Extruder 3D Printer Upgraded Bowden Extruder Dual Drive Extruder for Creality Ender 3 Pro/Ender 5 Pro/CR10S Pro, Anycubic Mega S, Tevo Tornado Wanhao D9, Anet A8 E10 and Prusa I3 DIY Printer Kits
Asin: B08B4FRR5F | Ean: 0782940268558 | UPC: 782940268558
Features
- Notification Do not adjust tension of hand twist screw too tight when you print soft filament, otherwise the filament wiring will be winding on the wheel. Manually adjust to a suitable tension for your 3D printer.
- Dual Drive Dual-drive BMG Bowden extruder has an internal transmission ratio of 3: 1 and high accuracy, and we recommend E-steps:385
- Application SIMAX3D For 3D printer upgration, especially those who want to print soft filament like TPU. All other filament is suitable as well: PLA / ABS / PETG / NYLON / CARBON FIBER / WOOD
- Compatibility Suitable for most DIY 3D printers, such as Creality CR10, Ender 3 series, Wanhao D9, Anet A8 E10, Geeetech A10 3D printer high-performance upgrade parts.
- Warranty Every product passed QC before shipment. But if you have problem, we provide free return/exchange in 90 days, pls contact us.
- See more on Amazon...
【Application】Simax3d For 3D Printer Upgration, Especially Those Who Want To Print Soft Filament Like Tpu. All Other Filament Is Suitable As Well: Pla / Abs / Petg / Nylon / Carbon Fiber / Wood.
【Warranty】Every Product Passed Qc Before Shipment. But If You Have Problem, We Provide Free Return/Exchange In 90 Days, Pls Contact Us..
【Compatibility】Suitable For Most Diy 3D Printers, Such As Creality Cr10, Ender 3 Series, Wanhao D9, Anet A8 E10, Geeetech A10 3D Printer High-Performance Upgrade Parts..
【Dual Drive】Dual-Drive Bmg Bowden Extruder Has An Internal Transmission Ratio Of 3: 1 And High Accuracy, And We Recommend E-Steps:385.
Brand: SIMAX3D | Manufacturer: SIMAX3D
Weight: 0.25 pounds
Warranty: 30 DAY
See On Amazon #30
NoClogger The Must-Have 3D Printing Tool 3D Printer Extruder Nozzle Cleaning (Blue)
Asin: B0B85Q21B3 | Ean: 0795063635398 | UPC: 795063635398
Features
- Turn a half-hour repair into a 3-second push!
- The arrow tip of NoClogger is designed to match the end shape of the nozzle.
- Using the adjustable indicator on the NoClogger you will know how much you have to push NoClogger down to clean your extruder completely.
- Our product image displays three items for illustrative purposes, but please note that each order includes only one unit. You will receive one item per order.
- See more on Amazon...
Using The Adjustable Indicator On The Noclogger You Will Know How Much You Have To Push Noclogger Down To Clean Your Extruder Completely..
Our Product Image Displays Three Items For Illustrative Purposes, But Please Note That Each Order Includes Only One Unit. You Will Receive One Item Per Order..
The Arrow Tip Of Noclogger Is Designed To Match The End Shape Of The Nozzle..
Brand: NoClogger | Manufacturer: NoClogger
See On Amazon
Looking For Something Else?
Search