BIQU - Buying Guide

Bestselling from BIQU on Amazon

1. BIQU PC4-M10 Pneumatic Connector Fittings Bowden Tube Coupler Male Straight PTFE Tube Push for E3D-V...
2. BIGTREETECH Panda Touch, Compatible with Bambu-lab P1S/P1P/X1C/A1/A1 Mini 3D Printers, Touch Screen ...
3. BIGTREETECH ADXL345 V2.0 Accelerometer Board Klipp-er Input Shaping 3D Printer Hotend Parts Sensor M...
4. BIQU 15A 250V Rocker Switch Power Socket Inlet Module Plug 5A Fuse Switch with 5Pcs 16-14 AWG Wiring...
5. BIGTREETECH SKR Mini E3 V3.0 Motherboard, Ender-3/Ender-3 Pro/Ender-3 V2 Motherboard Upgrade, BTT 32...
6. Bigtreetech Upgrade Dual Gear Extruder, Double Gear MK8 Extruder 3D Printer Dual Driver Stock Feeder...
7. BIQU Panda Jet Fan Duct for Bambulab P1S/P1P/X1C/X1E 3D Printers, Print Head Fan Duct, Larger Air Fl...
8. BIGTREETECH U2C V2.1 Adapter Board Supports CAN Bus Connection with 3 CAN Output Interface to Raspbe...
9. BIGTREETECH Smart Filament Runout Sensor V2.0 BTT SFS Filament Detector to Detect Filament Break/Run...
10. BIQU Extruder Pulley 36Teeth Bore 5mm Stainless Steel Drive Gear for 1.75mm & 3mm 3D Printer Filamen...

Features

• 10 x PC4-M10 pneumatic male straight quick connector for E3D-V6 long-distance bowden extruder, and compatible with Ender-3, Ender-3 V2, CR10 and other 3D printers
• PTFE Tubing Outer Diameter: 4 mm. Thread: 6mm
• The upper part(black) can be inserted 4mm PTFE tube and self-locking
• Made of high quality stainless steel, oxidation resistant and rust resistant, increase the life
• Quality fittings and high performance
• See more on Amazon...

Features

• Plug and Play BTT Panda Touch V1.0 is a 5-inches plug-and-play touch screen upgrade kit that s similar to the look and feel of the original X1C touchscreen. Just 2 main steps(dock installation + wiring) to easily get it installed, and then you can release the full capabilities of Bamboo Lab P-series printers to reach X-series experience!
• 2 Charging Modes for Portability BIGTREETECH Panda Touch features magnetic charging with the equipped magnetic charging dock and USB cable without extra power supply! And its built-in lithium battery also allows 30 mins of wireless portable life, so that you can take it away anywhere in the house or print farm to control your printers.
• AMS Management Panda Touch introduces a groundbreaking upgrade to Bamboo P/X/A series by providing an unparalleled, intuitive experience with direct control of the AMS.Supporting up to 4 AMS units with 16 filament slots per printer on up to 10 printers, you can effortlessly manage and customize filament types, colors, and printing temperatures with BTT Panda Touch. Make multi-colors printing effortless on any Bamboo-Lab machine!
• Up to 10 printers Control BTT Panda Touch enables simultaneous control and monitoring of 10 Bamboo-Labs printers ranging from P1/X1 to A1 series. We've developed multiple group control techniques which allows you to set one printer as a master and other as followers, or to set each printer as its own master. If you have more than one Bamboo machines then Panda Touch will give you the fine grained group control that you've been looking for.
• Multiple Functions Panda Touch help to control your Bamboo printers freely, it supports AMS management, portable control, LED light control, print head and heatbed control, fan speed control, TF Card / U disk reading, printing files management,Auto search Bamboo printers within the LAN; Multi-printers control and management and so on.
• About Compatibility Panda Touch is compatible with all Bamboo-Lab printers firmware versions up until: P1P> v01.05.02.00, P1S> v01.05.02.00, X1C> v01.07.02.00, A1> v01.01.01.00, A1 Mini> v01.01.03.00. It is possible that Bamboo-Lab release a future firmware which impacts some functions of Panda Touch. We will monitor all beta firmwares, and will get you informed via Amazon or our social channel if any firmware is found affected. NOTE: Warranty DOES NOT cover function lost by a firmware update.
• About Firmware Update Panda Touch firmware has been updated to V1.0.3. Some units may ship with an earlier firmware version. Please check your firmware version and upgrade to the latest for the best using experience. Please check on bttwiki for update tutorial: bttwiki/PandaTouch.html#firmware.
• See more on Amazon...

Features

• Plug-and-Play: Effortlessly connect ADXL345 to your Klippered printer with a simple setup, taking advantage of high-performance MCU hardware SPI for data sampling and communication, and enjoy compatibility with various host systems, easily connect to Raspberry Pi or Manta boards + CB1 with USB ports using a standard USB-A to USB-C cable.
• Flexible Mounting Options : Method 1: StealthBurner Direct Mount- Effortlessly install ADXL345 in the designated location, streamlining the setup process and saving valuable time; Method 2: Nozzle Mount- Attach near the nozzle for precise measurements
• Meets the Needs of Klipper Input Shaping: Accurately measures resonance frequencies, reducing print rippling at high speeds and accelerations for more precise detail.
• Effortless Wiring & Durable Connections: Reserved solder points enable users to customize wiring easily, ENIG mounting holes ensure stable connections and durability.
• What's in the Box ADXL345 V2.0 1, M6 x 13 x 2 Silicone Ring 2, M6 x 8 Socket Head Cap Screw 1. All parts are rigorously tested before leaving the factory. If there is any problem with the product, can you contact us to solve the problem for you first? Our technicians are always at your disposal.
• See more on Amazon...

Features

• Pay attention to:This Power Socket switch is installed well in a whole set,it can be used in directly when get it ,also Safe & Convenient for adding 5pcs wires
• Inlet Module: Standard IEC320 C14, Installed Fuse: 5A, Rocker Switch: Illuminated to show power status, 6A 250V AC 10A 125V AC
• Widely used inside computer, home appliance or DIY small project on power supply distribution and control
• Total Size : 5.8 x 4.8 x 3.4cm / 2.3 x 1.9 x 1.3(L x W x H); Plug Type : 3 Pin IEC320 C14
• Max Voltage/ Current: 10A/250V AC, 10A 125V AC
• See more on Amazon...

Features

• Born for Ender-3 Main control chip of BTT SKR Mini E3 V3.0 mainboard is STMicroelectronics' latest G0 series: STM32G0B1RET6 or STM32G0B0RET6. This 3D printer control board is compatible with Ender-3, Ender-3 V2, Ender-3 Pro, Ender-5 and Ender-5 pro.
• Larger Heatsink and 3 CNC Fans Upgraded SKR MINI E3 V3.0 has a larger aluminum heat sink area for stepper motor driver, increasing its heat dissipation performance by 20%. And SKR MINI E3 V3 also has 3 heat dissipation controllable fans to reduce the heat of your 3D printers when it's working.
• DIY Friendly BTT SKR Mini E3 V3.0 motherboard supports BLTouch, RGB lights, blocking detection and shutdown function. It also supports TFT35 E3 V3.0.1/TFT35 V3.0.1/TFT28 V3.0 touch screen as well as original 12864 LCD screen.
• Onboard TMC2209 Drivers BIGTRETECH SKR MINI E3 V3.0 mainboard is integrated with ultra silent TMC2209 stepper motor driver. TMC2209 driver generates lower heat and has a larger-area cooling position to lower the working temperature. Meanwhile, TMC2209 adopts stealthChop2 Mute technology to ensures noiseless operation, maximum efficiency and best motor torque.
• Firmware Update SKR Mini E3 V3.0 is compatible both with Marlin and Klipper firmwares. Firstly download firmware on GitHub website of SKR MINI E3 V3.0 motherboard, copy and save it to SD card (Note: ensure firmware have been reserved ), then re-plug the SD card and wait for 10s. Note: Our control board comes without SD card.
• Warranty BIQU offers a 12-months warranty for our SKR MINI E3 V3 motherboard. Please feel free to contact us if you might have any problem about our product, we are always ready for help.
• See more on Amazon...

Features

• Upgraded Dual Extruder Dual gears and dual pneumatic combined extrusion structure, large extrusion force, enhanced feeding intensity, ensuring smooth feeding. The double gear rotation design locks the filament, which is beneficial to improve printing quality and reduce filament slipping, high-speed extrusion or retraction, better pressure to push the filament into the printer, less easy to lose steps, faster printing speed
• Compatibility Double gear mk8 extruder, perfect replacement for 3D printer CR-10/ CR-10S/ CR-10S Pro/ Ender 3 (initial version)/Ender 3 v2/Ender 3 pro/Ender 5/Tornado, etc. 1.75 mm filament (Set only for 3D printers with motor shafts exceeding 20mm, please measure the shaft length before placing an order.)
• Stable and Durable All metal aluminum alloy, high quality double gear extrusion, compared with ordinary plastic drive, this high aluminum metal filament extruder is stable and durable. The idler gear has been upgraded with a brass washer added between the stainless steel gear and the aluminum housing, so the gear does not collide seriously with the housing, which helps reduce stock extruder wear.
• Adjustable Spring The tension of the extrusion spring can be adjusted by tightening the screw, which greatly improves printing accuracy and paper feeding problems. Strong extrusion end spring enhances feeding strength and ensures stable pushing of filaments into the hot end of the printer. Suitable for most types of filament, such as ABS, PLA, TPU, PTEG etc.
• Imported Materials The 3d printer dual extruder material is made of brand new imported aviation aluminum material and processed by CNC imported from Japan. The kit does not include the stepper motor, motor bracket and instructions, we need to make them ourselves. If you need some installation help, there are video introductions online, and you can seek our technical help at any time.
• See more on Amazon...

Features

• Larger Air Flow Panda Jet is a cooling fan duct with larger air flow than the stock one, and is installed on the bottom of the stock front housing assembly to cool the printed part so that the printed part can be shaped. It can effectively reduce the model's heat. Panda Jet is a great complement to Bambu s high-speed printing solution.
• Precise Cooling BIQU Panda Jet is an omni-directional part cooling fan duct. Its innovative air path design and corner outlet placement precisely channel cooling air to the nozzle, enhancing bridging and overhangs while also keeping the print view clear.
• Seamless Installation Compatible with the hot ends of Bamboo Lab P1P/P1S/X1C/X1E and also works with the Panda Flow and Revo series hot ends.
• Strong and Durable Made of quality MJF nylon, Panda jet features high-temperature resistance, high strength, corrosion resistance and durability, ensuring a more effective and long-lasting performance.
• Warranty BIQU offers a 12-months quality warranty, please feel free to contact us if you have any problem about our product
• See more on Amazon...

Features

• High-Performance U2C: support CAN bus connection, long data transmission time, strong anti-noise ability, strong real-time performance and high reliability
• Specially Treated PCB Surface: Immersion gold process is adopted, with better color and luster. The crystal structure formed by immersion gold is easier to weld than other surface treatments, and can have better performance and ensure quality. The stress is easier to control, and the experience is better when using
• High Reliability: TYPE-C port ESD protection to prevent static electricity from damaging hardware, and supports firmware update for the motherboard through SWD or hardware DFU
• Adapter Board: There are many different forms of CAN interfaces on the board, which help to connect different boards. The CAN bus has a long transmission distance, and a large number of nodes can be mounted on it. one connection multiple
• Quality Commitment: All products have been repeatedly tested before shipment, please use it with confidence, we provide a 12-month guarantee, if you have any questions, you can contact us at any time, we will provide you with a solution within 12 hours on working days you answer
• See more on Amazon...

Features

• Smart Filament Sensor BIGTREETECH SFS V2.0 can not only detect filament runout, but also filament breakage, filament clogging, filament tying and even extruder malfunction. Detecting above abnormal extrusion cases, BTT SFS V2.0 will send error alerts to screen and automatically stop printing to keep you away from filament and electricity waste.
• Sensitive Photoelectric Filament Detector BTT filament detection module adopts photoelectric sensor whose theoretical detection length can reach up to 2.88mm, much shorter than 7mm of SFS V1.0. Such improvement enables SFS V2.0 longer service life and higher precision in filament abnormality detection. Note: 2.88 mm is the minimum detection length for the sensor to function properly. If false triggers error occurs, try to increase the detection length by 1mm until the problem is resolved.
• Bilateral Feeding BIGTREETECH smart filament sensor V2.0 allows bi-directional feeding, which removes you from hard discrimination of filament inlet and outlet. Such upgrading enables more flexible installation and can maximize space utilization of your 3d printer! SFS V2.0 weighs only 36g, greatly reducing inertia added to the direct-drive extruder for higher printing speed and accuracy.
• Easy to Install Our filament run out sensor is designed with 3 mounting holes on the back for easy installation onto your 3d printer with only a bracket. The bracket stl file can be downloaded in BTT github web: bigtreetech/smart-filament-detection-module/tree/master. The filament feeding lever serves for easy flexible filament loading. Please feel free to contact us if you have any doubts.
• Wide Compatibility BIGTREETECH filament jam sensor can be mounted both on bowden extruder and direct drive extruders. It supports any motherboard with available I/O ports(Endstop, filament detection, BL touch, induction sensor, etc), like SKR MINI E3 V3.0 / SKR3 / SKR 3 EZ / SKrat / Manta E3EZ / Octopus Pro. And SFS V2.0 is compatible with Klipper, Marlin and RepRap firmwares.
• Warm Customer Service Please feel free to contact us directly through Amazon if you have any problem when using our SFS V2.0, BIGTREETECH customer service team will try our best to solve it.
• See more on Amazon...

Features

• Teeth number:36T
• Outer diameter:11 mm
• Bore: 5mm
• Height:11 mm
• Material: stainless steel
• See more on Amazon...

Features

• Lightweight & Wide Compatibility: BQIU H2 V2S, 195g lightweight design, smaller inertia, more accurate positioning, higher printing accuracy, than the ordinary 300g extruder on the market. 34% lighter at launch. Widely compatible with BIQU B1, BIQU BX, Ender-3, Voron2.4, Voron V0, Vzbot 3d printer, etc.
• Adjustable Filament Loading Tension: Simply rotate the tension screw to accommodate different filaments, improve the printing success rate, improve the printing performance of flexible filaments, compatible with most filaments on the market, such as: ABS/PLA/PVA/HIPS/PET/ PET etc.
• Dual Gear Feeding: H2 V2S extruder, powerful extrusion system, dual gear and a gear ratio of 7:1 for exceptional pushing force, 770N extrusion force, ensuring smooth feeding and giving snappy retractions.
• Efficient Heat Dissipation & More Mounting Holes: The lightweight and wear-resistant aluminum alloy housing, high thermal conductivity heat sinks, and fan realize a better heat dissipation.4 screw mounting holes are available for installing an auto leveling sensor/cooling fan, which can achieve more Function.
• High Temperature Print & Good Printing Experience: Bi-metal heatbreak enables high-temp printing at 270 with silicone sock for insulation.Accurate Movements/Higher Movement Speed /Better Print Detail, Its young and personalized design is also enough to catch the attention of most 3D enthusiasts
• See more on Amazon...

Features

• BTT TMC2209 V1.3 5PCS Package comes with 5 pieces BIGTREETECH TMC2209 stepper motor drivers and heatsinks. Continuous current of TMC2209 V1.3 reach up to 2.0A (peak 2.8A). Its voltage ranges from 5.5V to 28V and the microstepping capability can go up to 1/256, providing precise control over the stepper motor's movement. BTT TMC2209 V1.3 supports UART, STEP/ DIR Mode.
• Ultra-silent Stepper Motor Driver BIGTREETECH TMC2209 V1.3 adopts stealthChop2 Mute technology to reduce motor noise to the point of silence, ensuring noiseless operation, maximum efficiency and best motor torque. BTT TMC2209 V1.3 offers you the most cost-effective choise to upgrade your stepper drivers from non-silent TMC2100 / A4988 / DRV8825 / LV8729.
• No Losing Steps The Spreadcycle provides high-precision cycle-by-cycle current control for dynamic motion. And StallGuard4 technology provides sensorless homing and load detection to prevent potential abnormal motor rotation such as skipped steps. Therefore BTT TMC2209 V1.3 stepper motor drivers help to print smoothly and accurately without losing steps and rough print.
• Excellent Heat Dissipation With a larger area fan thermal pad, BTT TMC2209 V1.3 stepper motor driver generates lower heat, it can lower 30% heat than others stepper motor drivers even keep working for a long time. With Passive cooling on a 10 hours print, they only hit 37 C.
• Wide compatibility BIGTREETECH TMC2209 motor driver is compatible with most 3d printer motherboards in the markrt like BTT SKR 2, SKR 3, SKR 3 EZ, OctopusV1.1, Octopus Pro, SKR V1.4 Turbo, Manta M4P, Manta M5P, Manta M8P, GEN L V2.0, Anycubic I3 Mega and other mainboards. We offer all our customers 1 year warranty of tmc2209. Please feel free to contact us for help if you might have any problem during using.
• See more on Amazon...

Features

• Born for Ende-3 Series Printers Both BIGTREETECH SKR Mini E3 V3.0 mainboard and TFT35 E3 V3.0.1 touch screen are drop-in replacements for Ender-3 (same mouting holes, need to download firmware from GitHub web for update). And they are also compatible with Ende-3 pro, Ender-5, Ender-5 pro 3D printers.
• DIY Friendly Mainboard BTT SKR Mini E3 V3.0 motherboard supports BLTouch, RGB lights, blocking detection and shutdown function. Our SKR Mini E3 V3 also supports TFT35 E3 V3.0.1/TFT35 V3.0.1/TFT28 V3.0 touch screen as well as original 12864 LCD screen.
• Superior Heat Dissipation Upgraded SKR MINI E3 V3.0 3d printer control board is equipped with a larger aluminum heat sink of stepper motor driver instead of pieces small heat sink. Such design increases the heat dissipation performance of SKR Mini E3 V3 by 20%.
• TFT35 E3 V3.0.1 Touch Screen Appearance size: 93*87mm, power input : 5V, this is a 3.5 inch full-color screen with ultra clear interface and responsive touch. BIGTREETECH TFT35 E3 V3.0.1 display is designed for ender-3 3d printer especially, which can be a drop-in replacement for its original LCD screen.
• Two Working Modes TFT35 E3 V3.0.1 Touch screen supports UART serial port screen mode(touch screen mode) and 12864 screen mode. It can replace original display of Ender-3 3D printer. You can enjoy two printing modes: SD card and U disk.
• See more on Amazon...

Features

• Applicable 3d printer model The size of resin spring steel plate is 135X75mm. Suitable for any resin 3D printer with a printing platform size of 135X75mm, such as: Elegoo-Mars, Elegoo-Mars Pro, and Wanhao-D7, Phrozen-sonic mini 4k, Monoprice-Mini Deluxe;
• Easy to use The traditional DLP light curing printer platform must be removed with tools such as a scraper, while this resin flexible plate can be removed by bending.It's easier to remove the print model from the resin build surface.
• Strong Adhesion The resin steel plate surface is treated with special wire drawing, and the adsorption force is stronger, so that the model can be better adsorbed;
• High durability The mini 3d printer resin steel plate adopts spring steel imported from USA, which has good flatness and durability; The soft magnetic stickers have strong magnetic force.
• 24 Months Longer Warranty Strict testing for all components before delivery.We will provide a long-term warranty service of up to 24 months(The normal warranty period is 12 months). If you have any problems, such as magnetism or print size problems, you can contact our technicians to solve at any time.
• See more on Amazon...

Features

• Touch Screen for Ender 3 Appearance size: 93*87mm, power input : 5V. This is a 3.5 inch full-color screen with ultra clear interface and responsive touch, it is designed for ender 3 3d printer especially, which can be a drop-in replacement for its original LCD screen.
• Two Working Modes TFT35 E3 V3.0.1 touch screen support UART serial port screen mode (touch screen mode) and 12864 screen mode, it can replace original display of Ender 3 3D printer. You can enjoy two printing modes: SD card and U disk.
• More Extension Ports is Reserved TFT35 E3 V3.0.1 display r eserve the extension port of filament breaking detection,automatic shutdown after printing,also WIFI function can be realized by external WIFI module through WIFI port.
• Firmware Update TFT35 E3 V3.0.1 is easy and convenient to update firmware by SD card,download from our github, copy and save it to SD card.firmware must bed reserved ,then re-plug the SD card and wait to 10s.The firmware has been successfully updated.
• Quality Warranty TFT35 E3 V3.0.1 touch screen is designed and produced by BIGTREETECH team,any questions and feedback about that please free to tell us, we have professional technical team to support you
• See more on Amazon...

Features

• 500 High Temp All Metal hotend Our Phaetus authorized dragonfly bms hotend supports hight temperature printing up to 500 thanks to its all metal copper plated nozzle and heat block.
• Quality Material for Smooth Extrusion Besides its quality cooper-plated nozzle and heat break, BMS dragonfly hotend also adopts a copper alloy heat break whose Ra0.3 polished inner wall ensures a smooth filament feeding and extrusion. And its 0.25mm thickness heat break contributes to great heat insulation.
• Better Heat Dissipation BMS features a typical Phaetus dragonfly hotend with the conical fitting design of heat break and heat sink. Such unique design greatly improveheat dissipation of BMS hotend.
• Wide Compatibility Dragonfly BMS is compatible with Ender-3 and other Ender-3 and Ender-3 Series, Cr10 and CR Series, Prusa I3, MK3, MK3S and other 3D Printers. For filament, it is not only compatible with all regular filament like PLA /ABS /PETG /TPU / PP /PC /Nylon /PEEK /PEI, but also composite materials containing abrasive additives, such as carbon fiber /steel /wood /boron carbide /tungsten /phosphorescent pigment.
• Customer Services Please feel free to contacts us if you might have any problem when using our products, we will try our best to provide a satisfying solution.
• See more on Amazon...

Features

• Wide Application Size 18.5*20 mm, drive current 2.5A, peak current 3A, voltage range 8V - 48 V, 256 subdivision. Bigtreetech EZ5160 Pro V1.0 stepper motor driver compatible with most 3D printer control board, it is can be directly use with SKR 3 EZ motherboard. (If used on Octopus V1.2, SKR 3 and other popular main boards, stepper driver adapters are necessary.)
• Better heat dissipation It is definitely a innovation to combine stepper driver & heat sink. EZ5160 Pro V1.0 stepper driver adopts new large aluminum heatsink instead of using small pieces heatsink to enhance the heat dissipation capacity, keeping heat output and energy consumption to a minimum and also protecting the driver chip from external damage. Heating of EZ5160 Pro is far less than EZ2100/EZ2130.
• A Breeze to Install EZ5160 Pro V1.0 is an upgraded pinless structure stepper driver which protect you from finger prick. You can enjoy easy one-way installation due to the marvelous anti-misplugging design to remove motherboard damage caused by misplugging the drivers.
• Ultra Silent Step Driver EZ5160 Pro V1.0 stepper motor driver adopts stealthChop2 Mute technology which reduces motor noise to the point of silence at low velocities to ensures noiseless operation, maximum efficiency and best motor torque.
• Durable EZ5160 P It is equipped with 6 layer of PCB for superior performance. Compare to the old-style driver, EZ5160 Pro V1.0 stepper driver gives you a long service life even being used for a long time, built in last. We offer long-term after-sales guaranteed time of 12 months. Please feel free to contact us at any time if you have trouble when using our products.
• See more on Amazon...

Features

• High Performance MCU BTT MMB CAN is a control board to for Voron Enraged Rabbit Carrot Feeder System, which provides a perfect solution for multi-filament feeding to Voron 2.4 and other 3D printers that runs Klipper. This board adopts 32 bit, 64 MHz ARM Cortex-M0+ series MCU--STM32G0B1CBT6 for precise control and excellent print quality in your ERCF project.
• Redundant Design MMB CAN is equipped with 2+2 EZ drive sockets and 1+10 Enstop ports. Our redundant design provides backup interfaces and supprots DIY AMS project, increasing reliability and flexibility. MMB CAN supports klipper only.
• Multiple Reserved Interfaces I2C interface provides easy connection of BME680/BME280 sensor(to obtain real-time environmental monitoring) and filament runout/clogging sensor; Infrared sensor interface to connect TCRT5000 for precise detection and auto-calibration. RGB interface allows easy addition of NeoPixel/WS2812 LED strip.
• CANBus and USB Supported MMB CAN board supports CAN or USB communication, with selectable 120R terminal resistance for CAN and reserved CAN expansion interface. We use XT30 interface for CAN communication and board power supply to simplify wiring. CANBus can also provide reliable communication and stable data transmission for smooth and efficient printing. The USB port has ESD protection to prevent controller damage from electrostatic discharge.
• Polarity Protection The power interface has reverse polarity protection to prevent the board from being damaged if power cables are connected incorrectly during DIY. !!Note: Detailed set-up intruction can be found in BTT GitHup: github/bigtreetech/MMB. And BIQU is always ready for help, so please donot hesitate to contact us if you have any problem about BTT MMB CAN.
• What to do If the Motor Got Overheated Update to the latest firmware downloaded from our Github if the motors gets overheated when using MMB. BIQU promise 12 months quality warranty, so please feel free to contact us if you might have any problems when using our MMB, we are always ready to help.
• See more on Amazon...

Features

• Wide range of applications 5 inch capacitive Touch Screen designed for for pi 4 model B /pi 3 model A+ B+ B/pi 2 model B/pi 1 model B+ A+.
• High resolution This 5 inch LCD touch screen with a resolution of 800*480 and a display area of 108x64.8mm.
• 5-point touch It Supports Raspberry Pi DSI display interface, comes with a capacitive touch panel, and supports 5-point touch.Capacitive Touch Control ,better touch response,faster response time.
• Easy to install The unique hole design on the back allows you to install the Raspberry Pi directly.The display adopts Raspberry Pi power supply design, without external power supply.
• 12 MONTHS WARRANTY Thank you very much for your choice and trust. If you have any questions about the product, can you contact us first? Give us the opportunity to understand your needs, and we will do our best to answer questions and solve problems for you.
• See more on Amazon...

Features

• CAN Bus Communication BTT EBB36 CANBus extruder breakout board V1.2 supports communication via CAN or USB. CAN Bus communication features stabler data transmission in longer distances with shorter delay. The terminal resistor 120R of CAN can be selected through jumper cap. EBB36 CANBus also has CAN expansion interfaces.
• Simplify Wiring BIGTREETECH EBB36 CAN BUS exrtruder toolboard helps to clean up your tool head s wiring by having all wires go to the board instead of running them all the way down to your main control board. Get rid of the messy wires and enjoy a neat and convenient wiring!
• Rich Expansion Interfaces Reserved I2C interface allows filament broke/clogged detection, and supports other DIY functions. Onboard MAX31865 supports selecting 2-wire or 4-wire of PT100/ PT1000. With BOOT and RESET buttons reserved, users can update the firmware via DFU mode by USB.
• Enhanced Safety Added protection circuit on the thermistor can avoid leakage from the heating rod burning the main control chip. Equipped ESD protection chip on the USB port prevents the motherboard from being broken down by the static electricity of the USB port. Anti-flyback diodes on the heating rod and fans ports effectively protects the MOS tube from being burned due to reverse voltage. Anti-reverse connection design on the power interface prevents motherboard from burning in reverse co
• DIY Friendly User can select the thermistor s pull-up resistors values through jumper wire, so as to support PT1000 (2.2K pull-up resistors), making it convenient for DIY. BIGTREETECH EBB36 CAN BUS adaptor board is equipped with terminals, female reeds, double-way studs and screws, which are required for DIY, greatly meeting the DIY needs of customers.
• See more on Amazon...

Features

• Nema17 Stepper Dampers are used to decrease noise and resonance in your CNC and 3D Printer, eliminating vibration and effectively improving 3D printing quality
• Each package contains 12 pieces screws for you to use, enough for you to use and can provide a lot convenience in the process of using
• 1 Damper used per Stepper or Electric motor
• 3D Printers see a 5-10dB reduction in noise when used on X and Y Axis steppers with the vibration damper for nema 17
• Works on both Cartesian and Delta style Additive Manufacturing machines such as CR-10 Pair these with good filament for the best results in your 3D printer and remove vibration and noise
• See more on Amazon...

Features

• Material Our stainless steel adopt high quality stainless steel, this lead screw is rust and corrosive resistant, durable and stable.
• Smooth Movement It has low friction that helps the nut move smoothly on the lead screw. It also helps the lead screw work precise and accurate.
• T8 Brass Nut There are 4 holes on the T8 brass nut which can easy to fix to the machine.
• Bearing Pillow Block Bearing Pillow Block have a certain bearing capacity, can hold in ordinary precision rack, strong adaptability, and widely applied.
• Widely Usage T8 lead screw can cover a wide usage in 3D printer, stepper motor and CNC 3D engraving machine and other DIY kit.
• See more on Amazon...

Features

• Package includes magnetic charging dock*1, mounting bracket*1, USB-C charging cable*1, hex key*1, M3 x 6 flat head countersunk screws*4
• The power input has been outfitted with hot-plug protection, allowing users to hot plug the power supply.
• The USB charging dock is used with BIGTREETECH Panda Touch to control your Bamboo Lab 3D Printers.
• It is easy to install : screw the magnetic charging dock and the bracket, peel off the backing paper of the bracket and then stick the combo down a neat printer surface just above the original screen and compact it.
• Please feel free to contact us if you have any problem about our product, we are always ready for help.
• See more on Amazon...

Features

• 48V High Speed Printing Motor voltage of SKR 3 EZ varies from 12V to 48V (need to use EZ5160 Pro driver for 48V) while SKR 3 varies from DC 12V to 24V. Higher voltage can extremely improve your printing speed and you can adjust it with a jumper cap. What's more, SKR 3 owns 2 normal fans, and the EZ version owns 3 normal fans, which can ensure the smooth operation of your printer and advance your printing quality.
• Safe Anti-misplugging Design Wrong installation of drivers will not only cause damage to the drivers itself but even ruin the motherboard or catch fire. And according to our survey, 40% Users may misplug the drivers unintentionally. Our new arrivals SKR 3 EZ motherboard and EZ series drivers, featuring an unprecedented anti-misplugging design, can totally remove such hidden dangers to offer you a better and safer printing experience! (Traditional TMC drivers is still compatible.)
• Updates of Processor The new processor of SKR 3 EZ controller is upgraded to 32-bit 550MHz ARM Cortex-M7 series STM32H723VGT6, with which the running speed and printing accuracy of SKR 3 controller is greatly increased by 30%+ while its working noise become lower. Its upgraded thermistor supports PT1000, exempting the need of external module.
• DIY Friendly Interfaces BOOT0 is added for programming firmware in DFU mode. WIFI module (ESP-12S, ESP-07S, ESP32) is reserved. SKR 3 EZ motherboard also supports bltouch, resume printing function, RGB lights, blocking detection and shutdown after printing function. What s more, it s also compatible with TFT35 E3 V3.0/TFT35 V3.0/TFT28 V3.0/12864 LCD display as well as EZ2209/EZ2208/EZ5160, TMC2209/TMC2208/ TMC5150/DRV8825 stepper motor drivers.
• About Firmware SKR 3 EZ silent board compatible with three firmware Marlin, Klipper and RepRap, which are widely used in the 3D printing world. Firstly download firmware on GitHub website of name firmware.bin , copy and save it to SD card, firmware must bed reserved, then re-plug the SD card and wait to 10s. When the status indicator stops flashing and the file name in the SD card is renamed to FIRMWARE.CUR then update successfully. Note: Our control board come without SD card.
• See more on Amazon...

Features

• Convenient integrated adapter Board Are you tired of a bunch of messy wiring on your printer? BIQU TC Hotend Kit adopt all in one type-C connector and new integrated adapter Board which makes whole connection very tidy cable setup.Note:The Type-Connector must be a customized cable by BIQU.
• Compatibility BIQU TC Hotend kit not only can use in BIQU B1 3D printer, also it can be compatible with all the mainstream 3D printer brands Creality ANYCUBIC and Geeetech,like Ender 3, Ender 3 pro, Ender 5 and other Ender Series printer ,CR10,CR10S,ANYCUBIC Mega Zero.
• Dual Cooing Blower Fans Dual cooling blower fans for faster heat dissipation and less clogging.
• Colorful RGB Light Our extruder kit is all-metal design and there are multiple color of RGB light for choice,the colorful lighting effect makes print more visible and cool during night.
• Service Commitment We support 12 months quality warranty,We sincerely you can contact us to tell your feedback and suggestion about the product then we can make it better.
• See more on Amazon...

Features

• BIQU H2 V2.0 Upgrade Version Comparing BIQU H2 V2.0 extruder, H2 V2S highlights a lighter weight of 195g for declined adverse effect of inertia and higher printing precision. 4 extra screw mounting holes are added for installing more accessories like cooling fan and bl touch. Upgraded filament switch lever frees your hands when feeding.
• All Metal Hotend BIQU H2 V2S extruder features an all metal hot end, making high-temp printing up to 270 possible(can be upgraded to 500 ). Its titanium+ copper alloy all metal heat break ensures better heat dissipation and high temperature resistance.
• Effective Cooling The heat sink structure of H2 V2S extruder is optimized to ensure airflow is diverted up and away from the nozzle, accelerating heat dissipation and keeping an excellent heat dissipation environment for long-term printing of the extruder.
• Wide Compatibility Upgraded screw tensioner make it adjustable to accommodate different type of 1.75 filaments such as ABS, PLA, PVA, HIPS, PET, TPU etc.And BIQU H2 V2S extruder is compatible with various 3D printers on the market such as ender-3 /ender-3 Pro /ender-5 /ender-6 /CR10 /Mega S/Prusa I3 by DIY an attachment bracket.
• Powerful Extrusion System H2 V2S extruder routinely use the quality dual stainless steel gear. Its dual gear together with a 7:1 gear ratio contributes to an exceptional extrusion force of 770n
• See more on Amazon...

Features

• Higher Precision & Lighter: BIQU MicroProbe is 25mm long, 6g in weight, and has an accuracy of 0.001. It is 46% shorter, 40% lighter, and 10x more precise than other auto bed leveling sensors, high precision and low power consumption
• 1000W+ Lifespan: High quality metal probe, wear-resistant, removable and replaceable. With a lifespan of up to 10,000,000+, MicroProbe will be a perfect upgrade for your printer.
• Further Upgrades: Adopt BIQU smart chip, Micron level trigger accuracy ensures perfect auto bed level, no more tedious manual bed leveling. MicroProbe offers a sleek, futuristic-looking build with a black finish, geometric car-inspired design elements, and cool indicator light, easy to know the working state.
• Wide Compatibility: Suitable for printing platforms of various materials, such as PEI/Stickers/Glass/Metal. Suitable for a variety of printers, easily mounted with brackets, eg B1/BX/Ender-3, simple and convenient. 3D models of brackets for RatRig VC3, Voron2.4, and other printheads are available for download and print yourself. The source CAD model of the MicroPro be is also available to provide a reference for users to design mounting brackets for other machines.
• After Sales Support: If you have any questions about our Auto Bed Leveling Sensor Kit during use, please feel free to contact us. Our technical team will solve it for you in time.We have uploaded the compiled firmware for the microprobe on the Ender-3 machine with SKR MINI E3 V3.0 to -github, please feel free to contact us if you have any questions
• See more on Amazon...

Features

• Use for GT2 6mm Wide Timing Belt
• Toothless timing blet pulley, use with 20T 5mm bore idler pulley
• Bore Diameter: 5mm
• Net Weight: 3g/pcs
• Widely used in milling machine, gear shaper, drilling machine, CNC engine lathe, hobbing machine or other machinery transmission occasions
• See more on Amazon...

Features

• TFT35 SPI Touch Screen BIGTREETECH TFT35 SPI display is a resistive touch screen that controlled by the motherboard chip. Its LCD display is supported by SPI and touch function is supported by I2C. Appearance size: 98*56mm, power input : 5V.
• Responsive & Easy Operation TFT35 SPI is a 3.5 inch full-color screen with ultra clear display and responsive touch. It is connected to the motherboard through the FPC cable, simple and convenient to use, greatly improving your klipper experience.
• Reserved Extension Ports Designed with XH2.54 terminal, which can communicate with the board through the terminal.
• Compatible with BTT CB1 TFT35 SPI touch screen is compatible with all versions of BTT CB1 core board. It can directly use with CB1 V2.0 and CB1 V2.2, and need to match up with IO2CAN expansion module when used with CB1 V2.1.
• Quality Warranty We offer a 12 months quality warranty period for our products. If you have any question and feedback please feel free to contact us, our professional technical team will try best to help you.
• See more on Amazon...

Features

• Smooth PEI+Textured PEI Build Plate : Double-Sided design spring steel plate, one side is smooth carbon fiber PEI bed, the bottom of the printed model is smooth, the model is easy to disassemble and clean; The other side is PEI frosted surface, which makes the surface of the frosted sticker show a unique frosted touch, and the adhesion with the model and the print is stronger, and will not be deformed.
• Easy to Disassemble : The smooth and flat surface is flexible and removable. Once the build surface has cooled, the printout can be easily removed by hand. Note Before removing the model, allow the printing platform to cool sufficiently to avoid damaging the coating.
• High-quality PEI Plate : PEI sheet by using thicker stainless steel plate, enhance magnetic adhesion, ensure print quality, prevent warping. It is more resistant to high temperature and wear, the PEI coated bed surface is resistant to high temperature of 260 C, and provides better adhesion. Remove the transparent protective film from the surface before use
• Rich Design Needs : The bambu lab heated bed, Texture/Smooth design can meet different printing needs. Among them, the printing effect of the textured surface is more matte, and the printing effect of the smooth surface is more delicate.
• Compatibility : PEI flexible steel platform can print most filaments like PLA/ABS/PETG/TPU/Nylon. The double-sided PEI printing bed is suitable for 3D printers with a platform size of 257x257mm/10.12x10.12in, such as the Bambu Lab X1 X1C p1p X1-Carbon Combo. Please confirm your 3D printer platform size before ordering
• See more on Amazon...