BIGTREETECH MMB CAN V1.0 Board for Voron ERCF System, Control Board for Enraged Rabbit Carrot Feeder Support Multi-Material Feeding, for Voron 2.4 and Klipper 3D Printers DIY
Asin: B0CGRLVTZR
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.🌞【Multiple Reserved Interfaces】I2c Interface Provides Easy Connection Of Bme680/Bme280 Sensor(To Obtain Real-Time Environmental Monitoring) And Filament Runout/Clogging Sensor; Infrared Sensor Interface To Connect Tcrt5000 For Precise Detection And Auto-Calibration. Rgb Interface Allows Easy Addition Of Neopixel/Ws2812 Led Strip..
🌞【Polarity Protection】The Power Interface Has Reverse Polarity Protection To Prevent The Board From Being Damaged If Power Cables Are Connected Incorrectly During Diy. !!Note: Detailed Set-Up Intruction Can Be Found In Btt Githup: Github/Bigtreetech/Mmb. And Biqu Is Always Ready For Help, So Please Donot Hesitate To Contact Us If You Have Any Problem About Btt Mmb Can..
🌞【What To Do If The Motor Got Overheated】Update To The Latest Firmware Downloaded From Our Github If The Motors Gets Overheated When Using Mmb. Biqu Promise 12 Months Quality Warranty, So Please Feel Free To Contact Us If You Might Have Any Problems When Using Our Mmb, We Are Always Ready To Help..
🌞【Canbus And Usb Supported】Mmb Can Board Supports Can Or Usb Communication, With Selectable 120R Terminal Resistance For Can And Reserved Can Expansion Interface. We Use Xt30 Interface For Can Communication And Board Power Supply To Simplify Wiring. Canbus Can Also Provide Reliable Communication And Stable Data Transmission For Smooth And Efficient Printing. The Usb Port Has Esd Protection To Prevent Controller Damage From Electrostatic Discharge..
🌞【Redundant Design 】Mmb Can Is Equipped With 2+2 Ez Drive Sockets And 1+10 Enstop Ports. Our Redundant Design Provides Backup Interfaces And Supprots Diy Ams Project, Increasing Reliability And Flexibility. Mmb Can Supports Klipper Only..
Features
- High Performance MCU BTT MMB CAN is a control board to for Voron Enraged Rabbit Carrot Feeder System, which provides a perfect solution for multi-filament feeding to Voron 2.4 and other 3D printers that runs Klipper. This board adopts 32 bit, 64 MHz ARM Cortex-M0+ series MCU--STM32G0B1CBT6 for precise control and excellent print quality in your ERCF project.
- Redundant Design MMB CAN is equipped with 2+2 EZ drive sockets and 1+10 Enstop ports. Our redundant design provides backup interfaces and supprots DIY AMS project, increasing reliability and flexibility. MMB CAN supports klipper only.
- Multiple Reserved Interfaces I2C interface provides easy connection of BME680/BME280 sensor(to obtain real-time environmental monitoring) and filament runout/clogging sensor; Infrared sensor interface to connect TCRT5000 for precise detection and auto-calibration. RGB interface allows easy addition of NeoPixel/WS2812 LED strip.
- CANBus and USB Supported MMB CAN board supports CAN or USB communication, with selectable 120R terminal resistance for CAN and reserved CAN expansion interface. We use XT30 interface for CAN communication and board power supply to simplify wiring. CANBus can also provide reliable communication and stable data transmission for smooth and efficient printing. The USB port has ESD protection to prevent controller damage from electrostatic discharge.
- Polarity Protection The power interface has reverse polarity protection to prevent the board from being damaged if power cables are connected incorrectly during DIY. !!Note: Detailed set-up intruction can be found in BTT GitHup: github/bigtreetech/MMB. And BIQU is always ready for help, so please donot hesitate to contact us if you have any problem about BTT MMB CAN.
- What to do If the Motor Got Overheated Update to the latest firmware downloaded from our Github if the motors gets overheated when using MMB. BIQU promise 12 months quality warranty, so please feel free to contact us if you might have any problems when using our MMB, we are always ready to help.
- See more on Amazon...
Brand: BIQU | Manufacturer: BIQU
See On Amazon Similar To BIGTREETECH MMB CAN V1.0 Board
#1
BIGTREETECH SKR Mini E3 V3.0 Motherboard, Ender-3/Ender-3 Pro/Ender-3 V2 Motherboard Upgrade, BTT 32 Bit Silent Control Board with TMC2209 UART Stepper Motor Driver
Asin: B07YW86YS7 | Model: SKR MINI E3 V3.0 | PartNumber: SKR MINI E3 V3.0
🔥【Diy Friendly】Btt Skr Mini E3 V3.0 Motherboard Supports Bltouch, Rgb Lights, Blocking Detection And Shutdown Function. It Also Supports Tft35 E3 V3.0.1/Tft35 V3.0.1/Tft28 V3.0 Touch Screen As Well As Original 12864 Lcd Screen..
🔥【Firmware Update】Skr Mini E3 V3.0 Is Compatible Both With Marlin And Klipper Firmwares. Firstly Download Firmware On Github Website Of Skr Mini E3 V3.0 Motherboard, Copy And Save It To Sd Card (Note: Ensure Firmware Have Been Reserved ), Then Re-Plug The Sd Card And Wait For 10S. Note: Our Control Board Comes Without Sd Card..
🔥【Warranty】Biqu Offers A 12-Months Warranty For Our Skr Mini E3 V3 Motherboard. Please Feel Free To Contact Us If You Might Have Any Problem About Our Product, We Are Always Ready For Help..
🔥【Onboard Tmc2209 Drivers】Bigtretech Skr Mini E3 V3.0 Mainboard Is Integrated With Ultra Silent Tmc2209 Stepper Motor Driver. Tmc2209 Driver Generates Lower Heat And Has A Larger-Area Cooling Position To Lower The Working Temperature. Meanwhile, Tmc2209 Adopts Stealthchop2 Mute Technology To Ensures Noiseless Operation, Maximum Efficiency And Best Motor Torque..
🔥【Larger Heatsink And 3 Cnc Fans】Upgraded Skr Mini E3 V3.0 Has A Larger Aluminum Heat Sink Area For Stepper Motor Driver, Increasing Its Heat Dissipation Performance By 20%. And Skr Mini E3 V3 Also Has 3 Heat Dissipation Controllable Fans To Reduce The Heat Of Your 3D Printers When It's Working..
Features
- Born for Ender-3 Main control chip of BTT SKR Mini E3 V3.0 mainboard is STMicroelectronics' latest G0 series: STM32G0B1RET6 or STM32G0B0RET6. This 3D printer control board is compatible with Ender-3, Ender-3 V2, Ender-3 Pro, Ender-5 and Ender-5 pro.
- Larger Heatsink and 3 CNC Fans Upgraded SKR MINI E3 V3.0 has a larger aluminum heat sink area for stepper motor driver, increasing its heat dissipation performance by 20%. And SKR MINI E3 V3 also has 3 heat dissipation controllable fans to reduce the heat of your 3D printers when it's working.
- DIY Friendly BTT SKR Mini E3 V3.0 motherboard supports BLTouch, RGB lights, blocking detection and shutdown function. It also supports TFT35 E3 V3.0.1/TFT35 V3.0.1/TFT28 V3.0 touch screen as well as original 12864 LCD screen.
- Onboard TMC2209 Drivers BIGTRETECH SKR MINI E3 V3.0 mainboard is integrated with ultra silent TMC2209 stepper motor driver. TMC2209 driver generates lower heat and has a larger-area cooling position to lower the working temperature. Meanwhile, TMC2209 adopts stealthChop2 Mute technology to ensures noiseless operation, maximum efficiency and best motor torque.
- Firmware Update SKR Mini E3 V3.0 is compatible both with Marlin and Klipper firmwares. Firstly download firmware on GitHub website of SKR MINI E3 V3.0 motherboard, copy and save it to SD card (Note: ensure firmware have been reserved ), then re-plug the SD card and wait for 10s. Note: Our control board comes without SD card.
- Warranty BIQU offers a 12-months warranty for our SKR MINI E3 V3 motherboard. Please feel free to contact us if you might have any problem about our product, we are always ready for help.
- See more on Amazon...
Brand: BIQU | Manufacturer: BIQU
See On Amazon #2
BIGTREETECH SKR Mini E3 V3.0 Control Board +TFT35 E3 V3.0.1 Touch Screen Display 32-Bit Silent Board Integrated with TMC2209 UART Stepper Driver Compatible with Ender 3/5 Ender 3 Pro/V2 3D Printer
Asin: B09MYT45BQ | Model: 1060000518 | PartNumber: 1060000518
⭐【Impressive Heat Dissipation】The Btt Skr Mini E3 V3.0 Silent Board Also Looks Aesthetic With Upgraded Designs.New Heatsink And 3 Pwm Controlled Fans Serve To Cool Down The Machine During Printing, Effectively Improving Performances On Heat Dissipation. A Direct 3D Printer Control Board Replacement For Ender 3, Ender 3 Pro, And Ender 5 3D Printer Motherboards..
⭐【Satisfying After-Sales Support】If You Have Any Problems About Btt Skr Mini E3 V3.0 & Tft35 E3 V3.0.1 Smart Display Combo Sets, Please Feel Free To Contact Us Anytime. We Have Profession Technical Supports Team To Help You As Soon As We Can..
⭐【Supports Touch/Graphic Display】Btt Tft35-E3 V3.0 Display Enables You To Easily Switch Between The Marlin Lcd Emulator And Touch Screen With Menu Interface, Simply By Pressing And Holding The Selector Wheel. It's A Plug And Play On Ender Series Printers With Btt Skr Mini E3 V3.0 Control Board.（Note:When Running Klipper Firmware,Tft35 E3 V3.0.1 Display Only Support 12864 Mode).
⭐【Upgraded More Capabilities】Intergrated With Tmc2209 V1.3 Mute Stepper Driver,Bigtreetech Skr Mini E3 V3.0 Motherboard Offers Silent Performance As Default, And Supports Dual Z Steppers For Linear Rail And Belt Upgrades, Filament Runout Support, Automatic Shutdown (Ups Support), Power-Off Resume, Sensorless Homing And So On..
Features
- BIGTREETECH Combo Set Comes with Bigtreetech SKR Mini E3 V3.0 32 bit control board and TFT35 E3 V3.0.1 touch screen display with dual modes as a set. perfect for Ender 3 3D Printer,plug and playing, Adopted the latest G0 series MCU-STM32G0B0RET6 main control chip packing excellent performances.
- Upgraded More Capabilities Intergrated with TMC2209 V1.3 mute stepper driver,BIGTREETECH SKR Mini E3 V3.0 motherboard offers silent performance as default, and supports dual Z steppers for linear rail and belt upgrades, filament runout support, automatic shutdown (UPS support), power-off resume, sensorless homing and so on.
- Impressive Heat Dissipation The BTT SKR MINI E3 V3.0 silent board also looks aesthetic with upgraded designs.New heatsink and 3 PWM controlled fans serve to cool down the machine during printing, effectively improving performances on heat dissipation. A direct 3D printer control board replacement for Ender 3, Ender 3 Pro, and Ender 5 3D Printer motherboards.
- Supports Touch/Graphic Display btt tft35-e3 v3.0 display enables you to easily switch between the Marlin LCD emulator and touch screen with menu interface, simply by pressing and holding the selector wheel. It's a plug and play on Ender series printers with BTT SKR MINI E3 V3.0 control board. Note:When running klipper firmware,tft35 e3 v3.0.1 display only support 12864 mode)
- Satisfying After-Sales Support If you have any problems about BTT SKR MINI E3 V3.0 & TFT35 E3 V3.0.1 smart display combo sets, please feel free to contact us anytime. We have profession technical supports team to help you as soon as we can.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
See On Amazon #3
BIGTREETECH Mini12864 V2.0 LCD Graphic Smart Display Control Board with Adapter and Cable for Ender-3 VORON 2.4 Prusa-i3 3D Printer RAMPS 1.4 RepRap 3D Printer Mendel Prusa Arduino
Asin: B08P5LXR86 | Model: KINGPRINT-ZZB000475 | PartNumber: KINGPRINT-ZZB000475 | Ean: 0791568743491 | UPC: 791568743491
3.Product Comes Encoder Parameter Adjustment Can Be Achieved, And The File Selection Print..
5.Do Not Worry About The Problem Of After-Sales, If There Is Any Need, Get In Touch With Us, We Will Help You Solve It..
4.Plug And Play On The Ramps, But Need To Modify The Firmware To Support..
2.With A Sd Card Base On Back, Put Slicing File Into The Sd Card And Select The File On The Lcd, Then Can Be Printing..
Features
- 1.The Mini12864 display panel has RGB multi-color backlight and can support 8 RGB, which is even more cool.
- 2.With a SD card base on back, put slicing file into the SD card and select the file on the LCD, then can be printing.
- 3.Product comes encoder parameter adjustment can be achieved, and the file selection print.
- 4.Plug and play on the RAMPS, but need to modify the firmware to support.
- 5.Do not worry about the problem of after-sales, if there is any need, get in touch with us, we will help you solve it.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
Dimensions: 1.18 x 2.36 x 1.18 inches | Weight: 0.11 pounds
See On Amazon #4
BIGTREETECH SKR V1.4 Control Board 32bit Upgrade SKR V1.3 Motherboard, Compatible TFT35/TFT35 E3/TFT70 Touch Screen Mini12864 LCD Support TMC2209/EZ2209/TMC2208/TMC5160 for Most FDM 3D Printer
Asin: B0BHNVFR1M | Model: KINGPRINTER-1020000399 | PartNumber: KINGPRINTER-1020000399
⭐Support 2.4, 2.8, 3.5-Inch Color Touch Screen, Support Lcd2004 Screen, Lcd12864 Screen; Upgrade Configuration Firmware Through Sd Card, Simple, Convenient And Efficient Operation..
⭐On-Board Tmc Driver Spi Working Mode And Uart Working Mode, And The On-Board Diag Function Pins Are Convenient For Customers To Use, Eliminating The Complicated Wiring Process, Which Can Be Used By Simply Removing And Inserting The Jumper Cap; Functions Such As Continuous Power On, Material Detection, Shutdown After Power Off..
⭐It Can Supply Power To Tft Screen, Bltouch, Neo-Pixel By Plugging In An External Dc5v Power Module; In Addition, I2c, Spi, Wifi Interface Is Reserved To Facilitate Customer Diy..
⭐Equipped With Highly Modular Open Source Firmware Marlin 2.0, Which Is Convenient For Users To Diy And Secondary Development..
Features
- Using 32-bit 100MHz ARM-class Cortex-M3 series LPC1768 main control chip, the performance is greatly improved.
- Equipped with highly modular open source firmware Marlin 2.0, which is convenient for users to DIY and secondary development.
- Support 2.4, 2.8, 3.5-inch color touch screen, support LCD2004 screen, LCD12864 screen; Upgrade configuration firmware through SD card, simple, convenient and efficient operation.
- It can supply power to TFT screen, BLtouch, Neo-pixel by plugging in an external DC5V power module; in addition, I2C, SPI, WIFI interface is reserved to facilitate customer DIY.
- On-board TMC driver SPI working mode and UART working mode, and the on-board DIAG function pins are convenient for customers to use, eliminating the complicated wiring process, which can be used by simply removing and inserting the jumper cap; Functions such as continuous power on, material detection, shutdown after power off.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
See On Amazon #5
BIGTREETECH SKR Mini E3 V3.0 Motherboard + TFT35 E3 V3.0.1 Touch Screen Upgrade Kit for Ender-3 Ender-3 Pro 3D Printers, BTT 32-bit Silent Main Board Onboard TMC2209, Support Marlin/Klipper
Asin: B082HBZ3BH | Model: SKR MINI | PartNumber: SKR MINI
🔥【Superior Heat Dissipation】Upgraded Skr Mini E3 V3.0 3D Printer Control Board Is Equipped With A Larger Aluminum Heat Sink Of Stepper Motor Driver Instead Of Pieces Small Heat Sink. Such Design Increases The Heat Dissipation Performance Of Skr Mini E3 V3 By 20%..
🔥【Two Working Modes】Tft35 E3 V3.0.1 Touch Screen Supports Uart Serial Port Screen Mode(Touch Screen Mode) And 12864 Screen Mode. It Can Replace Original Display Of Ender-3 3D Printer. You Can Enjoy Two Printing Modes: Sd Card And U Disk..
🔥【Tft35 E3 V3.0.1 Touch Screen】 Appearance Size: 93*87Mm, Power Input : 5V, This Is A 3.5 Inch Full-Color Screen With Ultra Clear Interface And Responsive Touch. Bigtreetech Tft35 E3 V3.0.1 Display Is Designed For Ender-3 3D Printer Especially, Which Can Be A Drop-In Replacement For Its Original Lcd Screen..
🔥【Diy Friendly Mainboard】Btt Skr Mini E3 V3.0 Motherboard Supports Bltouch, Rgb Lights, Blocking Detection And Shutdown Function. Our Skr Mini E3 V3 Also Supports Tft35 E3 V3.0.1/Tft35 V3.0.1/Tft28 V3.0 Touch Screen As Well As Original 12864 Lcd Screen..
Features
- Born for Ende-3 Series Printers Both BIGTREETECH SKR Mini E3 V3.0 mainboard and TFT35 E3 V3.0.1 touch screen are drop-in replacements for Ender-3 (same mouting holes, need to download firmware from GitHub web for update). And they are also compatible with Ende-3 pro, Ender-5, Ender-5 pro 3D printers.
- DIY Friendly Mainboard BTT SKR Mini E3 V3.0 motherboard supports BLTouch, RGB lights, blocking detection and shutdown function. Our SKR Mini E3 V3 also supports TFT35 E3 V3.0.1/TFT35 V3.0.1/TFT28 V3.0 touch screen as well as original 12864 LCD screen.
- Superior Heat Dissipation Upgraded SKR MINI E3 V3.0 3d printer control board is equipped with a larger aluminum heat sink of stepper motor driver instead of pieces small heat sink. Such design increases the heat dissipation performance of SKR Mini E3 V3 by 20%.
- TFT35 E3 V3.0.1 Touch Screen Appearance size: 93*87mm, power input : 5V, this is a 3.5 inch full-color screen with ultra clear interface and responsive touch. BIGTREETECH TFT35 E3 V3.0.1 display is designed for ender-3 3d printer especially, which can be a drop-in replacement for its original LCD screen.
- Two Working Modes TFT35 E3 V3.0.1 Touch screen supports UART serial port screen mode(touch screen mode) and 12864 screen mode. It can replace original display of Ender-3 3D printer. You can enjoy two printing modes: SD card and U disk.
- See more on Amazon...
Brand: BIQU | Manufacturer: BIQU
See On Amazon #6
BIGTREETECH DIRECT SKR Mini E3 V2.0 Control Board 32Bit Silent Motherboard Integrated with TMC2209 UART Stepper Motor Driver for Upgraded Ender 3 Ender 3 Pro 3D Printer Control Board
Asin: B089CQ3DHB | Model: ZZB000412 | PartNumber: ZZB000412
🌈【Support Various Functions】Btt Skr Mini E3 V2.0 Control Board Supports Various Function Extensions, Such As, Bltouch, Filament Detection, Resumption Of Shutdown, Shutdown After Shutdown, Etc ..
🌈【Satisfying Customer Services】If You Need Any Information For Skr Mini E3 V2.0, You Could Contact Us On Amazon, And We'll Get Back To You Within 24 Hours..
🌈【Notes】 Pay Attention To Correct Wiring, Avoid Motherboard Contact With Metal Objects, And Take Electrostatic Protection Measures..
🌈【 4 Layers For Board】Bigtreetech Direct Skr Mini E3 V2.0 Increased To 4 Layers On The Control Board's Back, So As To Improve On Heat Dissipation Signal Function And Anti-Interference..
🌈【Better Thermal Dissipation】The Hot-Bed Mos Tube Uses Wsk220n04, Low On-Resistance, Which Reduces Heat Generation. Enlarged Heat Dissipation Area Protects Driving Chip And Components From Problems Caused By Heat Sink..
Features
- Silent Control Board BIGTREETECH Direct SKR MINI E3 V2.0 adopts ARM Cortex-M3 series STM32F103RCT6 main control chip with 32-bit CPU 72MHz, integrated with TMC2209 to enhance its stability. It's a super easy drop in replacement for Ender 3 printer.plug and playing.
- Better Thermal Dissipation The hot-bed MOS tube uses WSK220N04, low on-resistance, which reduces heat generation. Enlarged heat dissipation area protects driving chip and components from problems caused by heat sink.
- Support Various Functions BTT SKR MINI E3 V2.0 control board supports various function extensions, such as, BLtouch, filament detection, resumption of shutdown, shutdown after shutdown, etc .
- 4 Layers for Board BIGTREETECH Direct SKR MINI E3 V2.0 increased to 4 layers on the control board's back, so as to improve on heat dissipation signal function and anti-interference.
- Satisfying Customer Services If you need any information for SKR MINI E3 V2.0, you could contact us on Amazon, and we'll get back to you within 24 hours.
- Notes Pay attention to correct wiring, avoid motherboard contact with metal objects, and take electrostatic protection measures.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH Origianl
Dimensions: 0.39 x 4.00 x 2.80 inches
See On Amazon #7
BIGTREETECH EBB SB2209 CAN V1.0 Extruder Breakout Board for Voron Stealthburner UART Mode Support Klipper with 100K NTC B3950 + 30-Pin Ribbon Wire Kit
Asin: B0C42TBZ3L
The Can Bus Of Xt30 Communication Interface Supports A Maximum Current Of 10A, Making It Safer To Use; The Interface Is More Stable When Plugged In And Out, Reducing The Shaking Caused By Extrusion Movement; Equipped With A Dedicated 3M Can Bus Wire, It Is Easy To Use And Eliminates The Need For Crimping Terminals And Other Steps..
On Board Temperature Sensor, Monitoring Tool Board Mcu Stability, Extrusion Head Cavity Temperature, More Reliable To Use; On Board Max31865, With Paddle Switch Selection, Supports 2 Or 4 Wire Pt100 Pt1000 (More Accurate Data, Maximum Temperature Measurement Value Of 500 ℃, Ntc Maximum Temperature Measurement Value Of 150 ℃)..
The Onboard Adxl345 Accelerometer And Reserved Spi Interface Facilitate The Activation Of Klipper Resonance Compensation Function; The Spi Interface Can Be Externally Connected To The Adxl345 Accelerometer Module, With Flexible Installation Positions To Meet More Diy Usage Scenarios..
The Ebb Sb2209 Is Equipped With Tmc2209 Driver Chip And A Ultra Silent Stepper Driver, Making It The Most Cost-Effective Choice For Motors That Are Not Prone To Stepping Out. It Has Functions Such As Overheating Protection, Stall Protection, And Preventing Motor Vibration..
Features
- Adopting the leading STM high-performance 32-bit 64MHz STM32G0B1RET6 main control chip, it ensures the stability of CAN bus signals and can achieve long-distance high-speed data transmission, bidding farewell to cumbersome cable management from now on!
- The EBB SB2209 is equipped with TMC2209 driver chip and a ultra silent stepper driver, making it the most cost-effective choice for motors that are not prone to stepping out. It has functions such as overheating protection, stall protection, and preventing motor vibration.
- The CAN Bus of XT30 communication interface supports a maximum current of 10A, making it safer to use; The interface is more stable when plugged in and out, reducing the shaking caused by extrusion movement; Equipped with a dedicated 3m CAN Bus wire, it is easy to use and eliminates the need for crimping terminals and other steps.
- The onboard ADXL345 accelerometer and reserved SPI interface facilitate the activation of Klipper resonance compensation function; The SPI interface can be externally connected to the ADXL345 accelerometer module, with flexible installation positions to meet more DIY usage scenarios.
- On board temperature sensor, monitoring tool board MCU stability, extrusion head cavity temperature, more reliable to use; On board Max31865, with paddle switch selection, supports 2 or 4 wire PT100 PT1000 (more accurate data, maximum temperature measurement value of 500 , NTC maximum temperature measurement value of 150 ).
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
See On Amazon #8
BIGTREETECH SKSM V1.0 SBC Power Protection Module with Current Limiting Protection, Smart Power Outage Detection Compatilbe with Raspberry Pi3, 4B, BTT PI, PI4B+CB1 Core Board Running Klipper
Asin: B0D2HNZXLL | Model: BIGTREETECH SKSM V1.0 | PartNumber: BIGTREETECH SKSM V1.0
✅Current Limiting Protection: Btt Sksm V1.0 Power Shutdown Protection Module With The Current-Limiting Protection Function, It Can Limit The Power Supply Current Of The 3D Printer Motherboard To The Module, Ensure That The Module Will Not Fail To Start Due To Over-Current Protection..
✅Backup Power: Equipped With Two 2.7V 20F Super Capacitors, It Ensures Your Printer Has Enough Power To Save Your Work During An Outage. Comes With Reverse Polarity Protection To Safeguard Against Wrong Connections, Thus Protecting Your Printer’S Circuit Board..
Notes: Bigtreetech Sksm V1.0 Cannot Restart Btt Pi V1.2, Manta Series Motherboards Because The Reset Io Is Not Lead Out And Can Only Be Used For Shutdown Protection And Cannot Achieve Self-Starting After Power Failure. The Reset Pin On The Sksm Can Be Connected To A Host Computer With A Power Reset Function, Such As Btt Pi 2, Raspberry-Pi 4B, To Achieve Power-Off Self-Start. If You Have Any Questions, Please Contact Us And We Will Help You Solve It..
✅Smart Power Outage Detection: It Has A High-Sensitivity Mcu Chip That Can Quickly Detect Power Losses. Small Size, Easier Installation..
✅Power Supply For Raspberry Pi: The Usb-A Port On The Sksm Directly Powers Raspberry Pi3, 4B, Btt Pi V1.2 And Pi4b Adapter+Cb1 V2.2/Cb2, Offering A 5V 2A Output. When Using The Bigtreetech Pi 2 With The Sksm, Please Use A 12V-24V Power Supply. Do Not Use A Type-C 5V Power Supply. For Running Klipper Dc12-24V 3D Printer..
Features
- SBC System Image Protection: BIGTREETECH SKSM V1.0 module designed for Klipper, the SBC can easily be supplied with additional power after the printer is turned of, allowing files to be saved securely before shutdown, thus protecting the SBC system image from damage.
- Power Supply for Raspberry Pi: The USB-A Port on the SKSM directly powers Raspberry Pi3, 4B, BTT PI V1.2 and PI4B Adapter+CB1 V2.2/CB2, offering a 5V 2A output. When using the BIGTREETECH Pi 2 with the SKSM, please use a 12V-24V power supply. Do not use a TYPE-C 5V power supply. For running Klipper DC12-24V 3D Printer.
- Current Limiting Protection: BTT SKSM V1.0 power shutdown protection module with the current-limiting protection function, It can limit the power supply current of the 3D printer motherboard to the module, ensure that the module will not fail to start due to over-current protection.
- Smart Power Outage Detection: It has a high-sensitivity MCU chip that can quickly detect power losses. small size, easier installation.
- Backup Power: Equipped with two 2.7V 20F super capacitors, it ensures your printer has enough power to save your work during an outage. comes with reverse polarity protection to safeguard against wrong connections, thus protecting your printer s circuit board.
- Notes: BIGTREETECH SKSM V1.0 cannot restart BTT PI V1.2, Manta series motherboards because the reset IO is not lead out and can only be used for shutdown protection and cannot achieve self-starting after power failure. The reset pin on the SKSM can be connected to a host computer with a power reset function, such as BTT Pi 2, Raspberry-Pi 4B, to achieve power-off self-start. If you have any questions, please contact us and we will help you solve it.
- See more on Amazon...
Brand: BIGTREETECH Direct | Manufacturer: BIGTREETECH Direct
See On Amazon #9
BIGTREETECH TFT35 E3 V3.0.1 Graphic Smart Display Panel Board for Ender-3 Compatible with SKR Mini E3 V3.0, SKR 3/EZ, Octopus/Pro/Max EZ, Kraken, SKR Pro V1.2 Control Board
Asin: B08182XHZZ | Model: TFT35 E3 V3.0.1 | PartNumber: TFT35 E3 V3.0.1 | Ean: 0778601688131 | UPC: 778601688131
3）Reserve Wifi Port, And Wifi Function Is Realized By External Wifi Module；Reserve The Extension Port Of Filament Breaking Detection (Fil-Det)；.
5）Lcd12864 Mode Uses Exp1, Exp2 And Exp3. Exp1 And Exp2 Are Lcd Screen Ports Of Normal Motherboard. Exp3 Is The Lcd Interface Used By E3 Series Motherboard (Such As Skr Mini E3 V1.2, Skr E3 Dip V1.1, Etc.).
4）Reserve The Extension Port Of Automatic Shutdown After Printing (Ps-On);.
2）This Display Board Has Higher Compatibility. Users Can Select Two Work Modes:Uart Serial Port Screen Mode And 12864 Screen Mode;Serial Port Screen Mode Supports Two Printing Modes: Sd Card And U Disk..
Features
- 1 ARM Cortex-M3 series GD32F205VCT6 chip with 32-bit CPU 120MHz; Upgrade the firmware by SD card. It is easy and convenient to operate.
- 2 This display board has higher compatibility. Users can select two work modes:UART serial port screen mode and 12864 screen mode;Serial port screen mode supports two printing modes: SD card and U disk.
- 3 Reserve WIFI port, and WIFI function is realized by external WIFI module Reserve the extension port of filament breaking detection (FIL-DET)
- 4 Reserve the extension port of automatic shutdown after printing (PS-ON);
- 5 LCD12864 mode uses EXP1, EXP2 and EXP3. EXP1 and EXP2 are LCD screen ports of normal motherboard. EXP3 is the LCD interface used by E3 series motherboard (such as SKR MINI E3 V1.2, SKR E3 DIP V1.1, etc.)
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
See On Amazon #10
BIGTREETECH Octopus V1.1 Control Board 32bit Compatible TFT Series Screen, Support DIY Klipper Firmware and Raspberry-Pi Online Printing for Voron V2.4 Upgrade 3D Printer (with 8Pcs TMC2209)
Asin: B09713SRVP | Model: KINGPRINTER-UUU001949 | PartNumber: KINGPRINTER-UUU001949
🐙【Motherboard Expansion Function】Support Bltouch, Locked-Rotor Detection, Shutdown After Printing, Resume Printing After Power Failure, Can Bus, U Disk Function, Iic Expansion; At The Same Time Reserved Wifi Interface, Pt100 Thermistor Interface (Optional), Dual Z-Axis Printer..
🐙【Tmc2209 Driver Mode】Tmc Motor Drivers Can Be Used In Spi Or Uart Mode By Simply Adjusting The Onboard Jumpers Beneath Each Motor Driver. Additionally You Can Connect Or Disconnect The Tmc Diag Pin Using An Onboard Jumper Allowing You To Use Hard Endstops Or Sensorless Homing Without The Need To Cut Any Pins..
🐙【Tmc2209 Driver Features】The Tmc2209 Stepper Driver Is Not Easy To Lose Steps And Is In An Ultra-Quiet Mode; The Module Has A Large Area Of Heat Dissipation Pad, Which Can Reduce The Temperature Of The Driver When It Is Working; The Module Supports Three Modes: Step / Dir And Uart..
🐙【Strong Diy Support】This Motherboard Supports Up To 8 Stepper Drivers With 9 Stepper Driver Outputs In Total; And Up To 6 Pwm Fans And 2 Always-On Fans With The Ability To Individually Select The Voltage Rail That Will Drive Each Fan. Select From Vin, 12V Or 5V..
Features
- Main Control Chip Uses a 32-bit ARM Cortex-M4 series STM32F446ZET6 main control chip with a core frequency of 180MHz.
- Strong DIY Support This motherboard supports up to 8 stepper drivers with 9 stepper driver outputs in total; And up to 6 PWM fans and 2 always-on fans with the ability to individually select the voltage rail that will drive each fan. Select from Vin, 12V or 5V.
- Motherboard Expansion Function Support BLTouch, locked-rotor detection, shutdown after printing, resume printing after power failure, CAN bus, U disk function, IIC expansion; at the same time reserved WIFI interface, PT100 thermistor interface (optional), dual Z-axis printer.
- TMC2209 Driver Features The TMC2209 stepper driver is not easy to lose steps and is in an ultra-quiet mode; the module has a large area of heat dissipation pad, which can reduce the temperature of the driver when it is working; the module supports three modes: STEP / DIR and UART.
- TMC2209 Driver Mode TMC Motor drivers can be used in SPI or UART mode by simply adjusting the onboard jumpers beneath each motor driver. Additionally you can connect or disconnect the TMC DIAG pin using an onboard jumper allowing you to use hard endstops or sensorless homing without the need to cut any pins.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
See On Amazon #11
BIGTREETECH SKR Mini E3 V3.0 Control Board + TFT35 E3 V3.0.1 Graphic Smart Display Panel Board New Upgrade 3D Printer Parts for Ender 3, Ender3 Pro, Ender 3 V2
Asin: B09LCKPV4G | Model: SKR Mini E3 V3.0+TFT35 E3 V3.0.1 | PartNumber: SKR Mini E3 V3.0+TFT35 E3 V3.0.1
【Increased Heat Sink】Redesign The Drive Heat Sink, Strengthen The Drive Heat Dissipation Capacity, And Greatly Improve The Heat Dissipation Performance;.
【Tft35-E3 V3.0 Screen】 This Touch Screen Panel Board Has Higher Compatibility. Users Can Select Two Work Modes:Uart Serial Port Screen Mode And 12864 Screen Mode;Serial Port Screen Mode Supports Two Printing Modes: Sd Card And U Disk..
【Output Power Supply】Increase Spi Output Port +3.3V Power Supply, External Spi Sensor Power Supply Voltage +3.3V And +5V Are Optional, Support The Motherboard To Directly Supply Power To Peripherals..
【Three Cnc Fan】Increase The Heat Dissipation Controllable Fan To Reduce The Printer Temperature When The Device Is Working;.
Features
- Main Control Chip Adopt STMicroelectronics' latest G0 series main control chip STM32G0B1RET6 or STM32G0B0RET6;
- Three CNC Fan Increase the heat dissipation controllable fan to reduce the printer temperature when the device is working;
- Increased Heat Sink Redesign the drive heat sink, strengthen the drive heat dissipation capacity, and greatly improve the heat dissipation performance;
- Output Power Supply Increase SPI output port +3.3V power supply, external SPI sensor power supply voltage +3.3V and +5V are optional, support the motherboard to directly supply power to peripherals.
- TFT35-E3 V3.0 Screen This touch screen panel board has higher compatibility. Users can select two work modes:UART serial port screen mode and 12864 screen mode;Serial port screen mode supports two printing modes: SD card and U disk.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
See On Amazon #12
BIGTREETECH SKR V1.4 Motherboard, 32 Bit DIY 3D Printer Control Board, Support Marlin/Klipper, Compatible with TMC2208/TMC5160/EZ2209 and TFT35 E3/ TFT70/ Mini12864 Touch Screen
Asin: B0D1Y1JMYR
💡【Diy-Friendly】 Bigtreetech Skr V1.4 Is An Ideal Cost-Effective Control Board For Those 3D Diy Enthusiast. It Reserves I2c, Spi And Wifi Interface. When Use The Wifi Module, You Can Use Btt Writer For Firmware Flashing, Serial Port Debugging And So On..
💡【Other Interfaces】Dual Z-Axis Interfaces To Eliminate The Trouble Of External Drive Expansion Module; The Thermistor Interface Is Protected By A Capacitor And A Varistor To Enhance The Resistance Of The Interface. There Are 4 Fan Interfaces On The Board In Total: 1-Way Cnc Fan And.
💡【Reserved Dc Module Interface】Reserved Dcdc Mode V1.0 Power Module Interface To Supply Power To Tft Panel, Bl Touch And Neopixel(Also Reserved Rgb Light Bar Supporting Neopixel Scheme)..
💡【Wide Compatibility】Skr V1.4 Is The Is The Upgraded Version Of Skr V1.3, It Is Compatible With Most Fdm 3D Printers In The Market Such As Ender-3/Ender-3 V2/Ender-3 S1, Cr 10 Etc. It Supports Tft2.4/Tft2.8/Tft3.5 Touch Screen And Also Lcd2004/Lcd12864 Screen; And Compatible With Tmc2208/Tmc2209/Ez2209/Tmc2208/Tmc5160 Stepper Drivers..
Features
- 32 Bit 3D Printer Motherboard BTT SKR V1.4 control board adopts 32-bit 100MHz ARM-class Cortex-M3 series LPC1768 main control chip. It comes with Marlin firmware 2.0, and also supports to run Klipper with BTT Pi v1.2 or CB1+Pi4B.
- Wide Compatibility SKR V1.4 is the is the upgraded version of SKR V1.3, it is compatible with most FDM 3D Printers in the market such as Ender-3/Ender-3 V2/Ender-3 S1, CR 10 etc. It supports TFT2.4/TFT2.8/TFT3.5 touch screen and also LCD2004/LCD12864 screen; And compatible with TMC2208/TMC2209/EZ2209/TMC2208/TMC5160 stepper drivers.
- DIY-friendly BIGTREETECH SKR V1.4 is an ideal cost-effective control board for those 3D DIY enthusiast. It reserves I2C, SPI and WiFi interface. When use the WiFi module, you can use BTT Writer for firmware flashing, serial port debugging and so on.
- Reserved DC Module Interface Reserved DCDC Mode V1.0 power module interface to supply power to TFT panel, BL touch and Neopixel(also reserved RGB light bar supporting Neopixel scheme).
- Other Interfaces Dual Z-axis interfaces to eliminate the trouble of external drive expansion module; The thermistor interface is protected by a capacitor and a varistor to enhance the resistance of the interface. There are 4 fan interfaces on the board in total: 1-way CNC fan and
- See more on Amazon...
Brand: BIQU | Manufacturer: BIQU
See On Amazon #13
BIGTREETECH Pi4B Adapter V1.0 for Raspberry Pi CM4, BTT CB1 V2.2/CB1 eMMC/CB2 Core Board Compatible SKR Mini E3 V3.0/SKR V1.4 Turbo/Octopus V1.1/Pro to Running Klipper for Voron/CoreXY/i3 3D Printer
Asin: B0B82MH21K | Model: Pi4B | PartNumber: Pi4B
Abundant Expansion Interfaces: Our Pi4b Adapter Features With Gigabit Ethernet Port, 5V Fan Port, 4*Usb 2.0 Ports, Dual Micro Hdmi Ports, Csi/Dsi Port, Microsd Slot, Provide More Features And Convenience..
Small Tips: We Provide The Stl File For The Pi4b+Cb1 Shell At Bigtreetech Github. If Needed, You Can Download And Print. Any Problems About Btt Pi4b Adapter, Please Feel Free To Contact Us On Amazon..
Wide Application: Use This Pi4b Assemble A Micro, Low -Cost Computer, Support Arm Gnu/Linux Distribution And Windows 10 Lot. Can Be Applied In The Fields Of Computer Vision, Smart Home, Voice Recognition, Robot Programming, Artificial Intelligence, Etc..
Board To Board Connector: Use The Same Btb Connector As Raspberry-Pi, Perfectly Compatible With The Various Versions Of The Raspberry Pi Cm4, And Easily Install The Cb1/Cb2. The 40-Pin Gpio Interface Is Compatible With The Raspberry Pi Ecology To Meet More Diy Needs..
Features
- Cost-effective option: Pairing PI4B Adapter with CB1, the function is close to the Raspberry-Pi 3B. With Bigtreetech motherboard, you can run the Linux system efficiently. The most value way using Klipper! When matching with the Raspberry Pi CM4, the function is exactly the same as the Raspberry Pi 4B.
- Board to Board Connector: Use the same BTB connector as Raspberry-Pi, perfectly compatible with the various versions of the Raspberry Pi CM4, and easily install the CB1/CB2. The 40-PIN GPIO interface is compatible with the Raspberry Pi ecology to meet more DIY needs.
- Abundant Expansion Interfaces: Our Pi4B adapter features with Gigabit Ethernet port, 5V fan port, 4*USB 2.0 ports, dual micro HDMI ports, CSI/DSI port, microSD slot, provide more features and convenience.
- Wide Application: Use this Pi4B assemble a micro, low -cost computer, support ARM GNU/Linux distribution and Windows 10 LoT. Can be applied in the fields of computer vision, smart home, voice recognition, robot programming, artificial intelligence, etc.
- Small tips: We provide the STL file for the Pi4B+CB1 shell at Bigtreetech GitHub. If needed, you can download and print. Any problems about BTT Pi4B adapter, please feel free to contact us on Amazon.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
See On Amazon #14
BIGTREETECH CEB V1.0 CAN Adapter Expansion Board Perfect for 2020 Aluminum Profiles Support Klipper EBB SB2240/SB2209 EBB36/42 CAN+Octopus Pro H723, Manta M4P/M5P/M8P Control Board
Asin: B0D14KZ3NZ | Model: CEB V1.0 | PartNumber: CEB V1.0
✅Comprehensive Can Interface Support: Features A Rich Array Of Interfaces: 5X Xh2.54 2-Pin Ports+ Screw Terminal Can Bus Interface, 1X Xt30 Connector, 1X Rj11 Port, Conveniently Compatible With Most Can Interfaces On The Market. 6X 120R Terminal Resistor Selectable Via Jumper For Diy Use..
✅Widely Compatible: Btt Ceb V1.0 Can Bus Expansion Board Applicable To Motherboards With Can Interface, Such As Manta M8p/M5/M4p, Manta E3 Ez, Octopus Pro H723/Kraken/Octopus Max Ez/Skr 3/Skr 3 Ez Board+Ebb Sb2209 Can Rp2040/Ebb Sb2240,Ebb36/42 Can Series.(Octopus V1.1, Octopus Pro F446/F429 Connect To Ceb, You Need To Purchase An Additional Rj11 Cable To Convert To Xh2.54)..
💓Attention: All Wiring Is Performed Without Power; During Installation, Be Sure To Use A Shell For Protection And Pay Attention To The Line Sequence To Prevent Short Circuits Between The Aluminum Profile And The Bottom Pins Of The Board And Communication Errors. If You Encounter Any Problems During Use, Please Contact Us At First Time, We Will Provide Satisfactory Solutions..
✅Comprehensive Protection: Esd Protection Chips And Filter Capacitors Are Added To Each Can Port, Tvs Diodes Are Added On Power Inputs To Safeguard The Connected Can Tool Boards From Surges And Static Damage..
✅Directional Interfaces For Neat Wiring: Bigtreetech Ceb V1.0 Can Adapter Board Is Designed In A Way That Ensures The Wires Exit In A Uniform Direction, Promotes Tidy Wiring While Improving The Overall Look..
Features
- Quick and Easy Installation: Our customized housing print files, perfect compatible with 2020 aluminum profiles, enables an immediate and hassle-free installation, for running Klipper.
- Directional Interfaces for Neat Wiring: BIGTREETECH CEB V1.0 CAN adapter board is designed in a way that ensures the wires exit in a uniform direction, promotes tidy wiring while improving the overall look.
- Comprehensive CAN Interface Support: Features a rich array of interfaces: 5x XH2.54 2-pin ports+ screw terminal CAN bus interface, 1x XT30 connector, 1x RJ11 port, conveniently compatible with most CAN interfaces on the market. 6x 120R terminal resistor selectable via jumper for DIY use.
- Comprehensive Protection: ESD protection chips and filter capacitors are added to each CAN port, TVS diodes are added on power inputs to safeguard the connected CAN tool boards from surges and static damage.
- Widely Compatible: BTT CEB V1.0 Can Bus expansion board applicable to motherboards with CAN interface, such as Manta M8P/M5/M4P, Manta E3 EZ, Octopus Pro H723/Kraken/Octopus Max EZ/SKR 3/SKR 3 EZ board+EBB SB2209 CAN RP2040/EBB SB2240,EBB36/42 CAN Series.(Octopus V1.1, Octopus pro F446/F429 connect to CEB, you need to purchase an additional RJ11 cable to convert to XH2.54).
- Attention: All wiring is performed without power; during installation, be sure to use a shell for protection and pay attention to the line sequence to prevent short circuits between the aluminum profile and the bottom pins of the board and communication errors. If you encounter any problems during use, please contact us at first time, we will provide satisfactory solutions.
- See more on Amazon...
Brand: BIGTREETECH Direct | Manufacturer: BIGTREETECH Direct
Weight: 0.03 pounds
See On Amazon #15
BIGTREETECH CB1 V2.2 Core Control Board for 3D Printers to Run Klipper, As CM4 Compatible with Rasp-Berry Pi4, BTT Pi4B, Manta E3EZ M8P M4P M5P Mainboard, 1GB DDR3 RAM, 100M Ethernet, Support HDMI
Asin: B0BXP6K3H7
🔥【Interfaces】Bigtreetech Cb1 Comes With Hdmi 2.0A Interface To Support 4K Displays. And Also Onboard Usb2.0 Interface..
🔥【Easy To Run Klipper】With The Same Btb Connector As Cm4, Cb1 Can Be Directly Mounted On Bigtreetech Manta Series Motherboards: Manta E3ez/Manta M4p/Manta M5p/Manta M8p To Run Klipper Easier And More Reliable. Combining With Btt Pi4b Or Rasp. Pi Base Board, Cb1 Can Also Be Used On Skr Mini E3 V3.0/Skr 3/Skr 3 Ez/Skr Pico/Octopus Pro Etc. To Run Klipper..
🔥【Internet Info】Bigtreetech Cb1 Core Control Board Supports 100M Ethernet And 100M Wifi 2.4G/802.11 B/G/N..
🔥【Powerful System】Btt Cb1 Adopts Quad-Core 64-Bit Cortex-A53 @1.5Ghz Processor And Mali G31 Mp2 Gpu, Supporting Opengl3.2; Equipping With 1Gb Ddr3 Memory Chip, Cb1 Is Programmable And Powerful To Run Linux And Supports Debian..
Features
- BTB Design BIGTREETECH CB1 core control board features the same board to board header as CM4. Thus BTT CB1 can be directly mounted both on your Rasp-berry Pi and BIGTREETECH Pi4B base board to run klipper in a highly cost-effective way.
- Powerful System BTT CB1 adopts quad-core 64-bit Cortex-A53 @1.5GHz processor and Mali G31 MP2 GPU, supporting OpenGL3.2; Equipping with 1GB DDR3 memory chip, CB1 is programmable and powerful to run Linux and supports Debian.
- Interfaces BIGTREETECH CB1 comes with HDMI 2.0A interface to support 4K displays. And also onboard USB2.0 interface.
- Internet Info BIGTREETECH CB1 core control board supports 100M Ethernet and 100M Wifi 2.4G/802.11 b/g/n.
- Easy to Run Klipper With the same BTB connector as CM4, CB1 can be directly mounted on BIGTREETECH Manta Series Motherboards: Manta E3EZ/Manta M4P/Manta M5P/Manta M8P to run Klipper easier and more reliable. Combining with BTT Pi4B or Rasp. Pi base board, CB1 can also be used on SKR MINI E3 V3.0/SKR 3/SKR 3 EZ/SKR Pico/Octopus Pro etc. to run Klipper.
- See more on Amazon...
Brand: BIQU | Manufacturer: BIQU
See On Amazon #16
BIGTREETECH SKR Mini E3 V2.0 Control Board+TFT35 E3 V3.0.1 Touch Screen Display 32Bit Silent Board Integrated with TMC2209 UART Stepper Driver for Ender 3 Ender 5 Ender 3 V2 3D Printer Motherboard
Asin: B089DBS62S | Model: VVV001854-0529 | PartNumber: VVV001854-0529
🌈Bigtreetech Skr Mini E3 V3.0 32 Bit Control Board Increase The Distance Between The Driving Chip And The Components To Avoid The Trouble Caused By The Heat Sink..
🌈For More Information Of Skr Mini E3 V2.0 Control Board,Please Search Bigtreetech At Github. Or You Could Contact Us Via Amazon Message, Our Professional Tech Supports Are Here To Help You. 1-Year Warranty Is 100% Guaranteed..
🌈Big Tree Tech Skr Mini E3 V2.0 Optimize The Plate And Frame To Avoid The Phenomenon Of Screw Hole Gap And Screws Hitting Components..
🌈Btt Skr Mini E3 V2.0 Added Parallel Double Z-Axis Interface; Add Protection Device To The Thermistor Interface..
Features
- Combo Sets: Comes with BIGTREETECH SKR MINI E3 V2.0 control board and TFT35 E3 V3.0.1 Touch screen display with dual modes, which also supports LCD 12864 display, perfect Kit For Ender 3.compatible with Ender 5/Ender 5 Pro,Ender 3 pro
- BTT SKR MINI E3 V2.0 Added parallel double Z-axis interface; Add protection device to the thermistor interface.
- Bigtreetech skr mini e3 v3.0 32 bit control board increase the distance between the driving chip and the components to avoid the trouble caused by the heat sink.
- big tree tech skr mini e3 v2.0 Optimize the plate and frame to avoid the phenomenon of screw hole gap and screws hitting components.
- For more information of SKR MINI E3 V2.0 control board,Please search BIGTREETECH at GitHub. Or you could contact us via Amazon message, our professional tech supports are here to help you. 1-Year warranty is 100% guaranteed.
- See more on Amazon...
Brand: BIGTREETECH Direct | Manufacturer: BIGTREETECH Direct
See On Amazon #17
BIGTREETECH CB1 V2.2 + Pi4B Adapter Panel Board Kit, Support with SKR Mini E3 V3.0 Octopus V1.1 Octopus Pro SKR 3 Control Board to Run Klipper VS Raspberry-Pi 4/3B for Voron 3D Printer
Asin: B0BLN8VCVN | Model: KINGPRINTER-1018890 | PartNumber: KINGPRINTER-1018890
⭐Bigtreetech Pi4b Is Equipped With Gigabit Ethernet Interface, Hdmi0 Interface, Hdmi1 Interface, Cam Interface, Csi Interface; 40Pin Double-Row Pin Header With The Same Function As Raspberry Pi..
⭐Because Of The Modular Form, Pi4b And Cm4 Have High Modularity, Which Is Convenient For Users To Use Diy..
⭐Bigtreetech Cb1 Reserves Hdmi2.0A Display Interface, Supports 4K Display; Onboard Usb2.0 Port, 100M Ethernet Interface And Supports Wifi Transmission..
⭐The Combination Of Pi4b+Cb1 Has High Product Cost Performance And Can Become A Low-Cost Choice For 3D Printer Users Who Use Ordinary Motherboards To Run Klipper..
Features
- Pi4B uses the same board frame and interface as Raspberry Pi 4B; the combination of CB1 and Pi4B, the performance is almost close to Raspberry Pi 3B, and can be an alternative to Raspberry Pi 3B.
- The combination of Pi4B+CB1 has high product cost performance and can become a low-cost choice for 3D printer users who use ordinary motherboards to run Klipper.
- BIGTREETECH Pi4B is equipped with Gigabit Ethernet interface, HDMI0 interface, HDMI1 interface, CAM interface, CSI interface; 40Pin double-row pin header with the same function as Raspberry Pi.
- BIGTREETECH CB1 reserves HDMI2.0A display interface, supports 4K display; onboard USB2.0 port, 100M Ethernet interface and supports WIFI transmission.
- Because of the modular form, Pi4B and CM4 have high modularity, which is convenient for users to use DIY.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
See On Amazon #18
BIGTREETECH CAN Adapter V1.0 Expansion Module Board for BTT Pi Support CAN Bus
Asin: B0C42TZ56H
Type-C Interface Esd Protection To Prevent Static Electricity From Damaging The Hardware..
Pop A Specially Designed Can Adapter Module Onto The Board To Enable The Dedicated Can Bus Port..
The Pcb Surface Of The Can Adapter Module Board Adopts Immersion Metal Work, And The Quality Is More Premium..
Bigtreetech Can Adapter Module Perfect Fit For Bigtreetech Pi V1.2 To Support Can Bus..
Features
- Uses 32-bit ARM Cortex-M0+ series STM32G0B1CBT6 main control chip.
- BIGTREETECH CAN Adapter Module Perfect fit for BIGTREETECH Pi V1.2 to support CAN Bus.
- TYPE-C interface ESD protection to prevent static electricity from damaging the hardware.
- The PCB surface of the CAN adapter module board adopts immersion metal work, and the quality is more premium.
- Pop a specially designed CAN adapter module onto the board to enable the dedicated CAN Bus port.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
See On Amazon #19
BIGTREETECH Octopus V1.1 32bit Control Board + TFT35 E3 V3.0.1 Touch Screen Display + 8xTMC2209 V1.3 Stepper Motor Driver DIY for Voron V2.4 3D Printer Controller Board Support Klipper Raspberry Pi
Asin: B09RWRBH47 | Model: 1060000524 | PartNumber: 1060000524
⭐Multi-Function Display: Tft35 E3 V3.0.1 Touch Screen Has Higher Compatibility. You Can Choose Two Working Modes: Uart Serial Screen Mode And 12864 Screen Mode. The Wifi Port Is Reserved, And The Wifi Function Is Implemented By An External Wifi Module.Sd Card Update Firmware Is Simple And Convenient, Download From Our Github, Copy And Save To Sd Card.
⭐Worry-Free After-Sales Service: Do You Have Any Questions? Or If You Have Any Problems That Need To Be Solved, Please Feel Free To Contact Us, And We Will Arrange The Most Professional Technical Team To Solve It For You Until You Are Satisfied..
⭐Ultra-Quiet Driver: Tmc2209 V1.3 With Spreadcycle Technology, Enables High Precision Cycle-By-Cycle Current Control For The Highest Dynamic Motion. Large Area Thermal Pad To Reduce The Temperature Of The Drive During Operation. The Motor Is Difficult To Lose Step. Can Prevent Motor Vibration. The Module Supports Step/Dir And Uart Modes..
⭐Super Multi-Function Control Panel: Support Material Interruption Detection, Continuous Printing After Power Failure, Shutdown After Printing, Bl_Touch, Support Online Printing, Etc. Upgrading The Configuration Firmware Through The Sd Card, The Operation Is Simple, Convenient And Efficient. Using High-Performance Mosfet, The Heat Dissipation Effect Is Better..
Features
- SUPER PERFORMANCE CHIP: BIGTREETECH Octopus control adopts 32-bit ARM-level Cortex-M4 series STM32F446ZET6 chip with a frequency of up to 180MHz, and supports 8 stepper motors. Equipped with highly modular open source firmware Marlin2.0, which greatly improves the overall performance of the motherboard, and all the functions of the motherboard do not require any expansion modules, and supports running Klipper and Marlin firmware
- SUPER MULTI-FUNCTION CONTROL PANEL: Support material interruption detection, continuous printing after power failure, shutdown after printing, BL_Touch, support online printing, etc. Upgrading the configuration firmware through the SD card, the operation is simple, convenient and efficient. Using high-performance MOSFET, the heat dissipation effect is better.
- MULTI-FUNCTION DISPLAY: TFT35 E3 V3.0.1 touch screen has higher compatibility. You can choose two working modes: UART serial screen mode and 12864 screen mode. The WIFI port is reserved, and the WIFI function is implemented by an external WIFI module.SD card update firmware is simple and convenient, download from our github, copy and save to SD card
- ULTRA-QUIET DRIVER: TMC2209 v1.3 with SpreadCycle technology, enables high precision cycle-by-cycle current control for the highest dynamic motion. Large area thermal pad to reduce the temperature of the drive during operation. The motor is difficult to lose step. Can prevent motor vibration. The module supports STEP/DIR and UART modes.
- WORRY-FREE AFTER-SALES SERVICE: Do you have any questions? Or if you have any problems that need to be solved, please feel free to contact us, and we will arrange the most professional technical team to solve it for you until you are satisfied.
- See more on Amazon...
Brand: BIQU | Manufacturer: BIGTREETECH
See On Amazon
Looking For Something Else?
Search