Best Chucking Reamers - Buying Guide
Last Updated: 04/27/2024
Share on
Bestselling Chucking Reamers on Amazon
- H.S.S Chucking Reamer Set 14pcs - 0.1240" Thru 0.5010" HSS M2 High Speed Steel, Straight Flute, Righ...
- Accusize Industrial Tools 29 Pc 1/16'' to 1/2'' by 1/64'' H.S.S. Chucking Reamer Set, Straight Flute...
- uxcell 3/8" 5/8" 1/2" 3/4" Chucking Reamer H7 Accuracy High Speed Steel Lathe Machine Reamer 6 Strai...
- Accusize Industrial Tools Over and Under Sizes 0.1240'' Thru 0.5010'' HSS M2 Premium Chucking Reamer...
- 5PCS M2 HSS Taper Chucking Reamer Set,3/8",1/2",5/8",3/4",1 Reamer Fit 1/2" Round Shank,Bridge/Cons...
- uxcell 1/8" 3/16" 1/4" 5/16" Chucking Reamer H7 Accuracy High Speed Steel Lathe Machine Reamer 6 Str...
- 29PCS HSS Chucking Reamer Set 1/16-1/2-Inch by 64ths with Wooden Case
- M2 HSS Taper Chucking Reamer 5pcs Set, 3/8", 1/2", 9/16", 5/8", 3/4", Fit 3/8" or 1/2" Shank Chuck, ...
- uxcell Chucking Reamer Set Lathe Machine Reamer Straight Flute Milling Cutter High Speed Steel H8 To...
- Lichamp 5pcs Reamer Drill Bit, 3/8" 1/2" 9/16" 5/8" 3/4" High Speed Steel Chucking Reamer Set Tapere...
#1
H.S.S Chucking Reamer Set 14pcs - 0.1240" Thru 0.5010" HSS M2 High Speed Steel, Straight Flute, Right Hand Cut
Asin: B0C4BGKCMP | Ean: 0765147666297 | UPC: 765147666297
Features
- Chucking Reamer Set 14pcs Include: Size 0.1240'' through 0.5010'', dicimal size
- Material: High Speed Steel
- Tolerance: +0.0002 - 0.0000
- Above 1/2 to 5/8 +.0003 -.0000.Above 5/8 to 1-1/2 +.0001 -.0004
- Straight Flute, Right-Hand Cut; Straight Shank; High Speed Steel
- See more on Amazon...
Tolerance: +0.0002" - 0.0000".
Straight Flute, Right-Hand Cut; Straight Shank; High Speed Steel.
Above 1/2" To 5/8" +.0003" -.0000".Above 5/8" To 1-1/2" +.0001" -.0004.
Material: High Speed Steel.
Brand: IWONGO | Manufacturer: IWONGO
Dimensions: 1.50 x 7.80 x 8.60 inches | Weight: 2.30 Pounds
See On Amazon #2
Accusize Industrial Tools 29 Pc 1/16'' to 1/2'' by 1/64'' H.S.S. Chucking Reamer Set, Straight Flute, Right Hand Cut, 5500-SF00
Asin: B00HQMXL38 | Model: 5500-SF00 | PartNumber: 5500-SF00 | Ean: 0663566007748, 0641799805454 | UPC: 663566007748, 641799805454
Features
- Comprehensive set of 29 H.S.S. chucking reamers, sizes range from 1/16" to 1/2" by 1/64" increments for diverse applications; straight shank, straight flute, right-hand cut.
- Straight flute design and right-hand cut orientation ensure smooth, precise cuts and excellent surface finish.
- Precision-ground with decimal equivalents from 0.0625 to 0.5000, catering to tight tolerance requirements.
- Flute lengths vary from 1/2 to 2, with overall lengths between 2-1/2 to 8, providing versatility across operations.
- Designed for use in lathes, drill presses, and milling machines, enhancing tool longevity and machining accuracy.
- See more on Amazon...
Precision-Ground With Decimal Equivalents From 0.0625" To 0.5000", Catering To Tight Tolerance Requirements..
Designed For Use In Lathes, Drill Presses, And Milling Machines, Enhancing Tool Longevity And Machining Accuracy..
Flute Lengths Vary From 1/2" To 2", With Overall Lengths Between 2-1/2" To 8", Providing Versatility Across Operations..
Straight Flute Design And Right-Hand Cut Orientation Ensure Smooth, Precise Cuts And Excellent Surface Finish..
Brand: Accusize Industrial Tools | Manufacturer: Accusize Co., Ltd.
Dimensions: 12.20 x 3.54 x 9.45 Inches | Weight: 2.45 Kilograms
See On Amazon #3
uxcell 3/8" 5/8" 1/2" 3/4" Chucking Reamer H7 Accuracy High Speed Steel Lathe Machine Reamer 6 Straight Flutes Round Shank Milling Cutter Tool Reamer Set for Bore Machining 4pcs
Asin: B09C8L512Q | Model: a20103000ux0040 | PartNumber: a20103000ux0040
Features
- Specifications: Cutting diameter: 3/8", 5/8", 1/2", 3/4"; accuracy class: H7. The hand reamers ream the cylindrical shape. Good for general purpose applications. Straight round shank provides a stable holding and can be used with a variety of tool holding systems.
- Material and Coating: Made of high-speed steel, the reamers have combination of hardness and toughness for wear resistance. The cutter body is sturdy and damage-resistant, with strong heat resistance that stable processing. Features just the base substrate without any coatings, suitable for wide ranges of applications.
- Wide Applications: Sharp blade for easy cutting and high efficiency. Used for processing, and bore machining. Suitable for accurate reaming in aluminum, cast iron, copper, plastic, wood, alloy, and other soft materials.
- Easy to Use: Can be used on screw machines, turret lathes, drilling and milling machines. Great for light cut, repair work, or simply for enlarging holes. Always keep reamers clean, and used with machine oil for long service use.
- Straight Flute: Straight flute tools allow chips to collect in the flutes when cutting. Well suited for most applications in shallow cuts.
- See more on Amazon...
Wide Applications: Sharp Blade For Easy Cutting And High Efficiency. Used For Processing, And Bore Machining. Suitable For Accurate Reaming In Aluminum, Cast Iron, Copper, Plastic, Wood, Alloy, And Other Soft Materials..
Straight Flute: Straight Flute Tools Allow Chips To Collect In The Flutes When Cutting. Well Suited For Most Applications In Shallow Cuts..
Easy To Use: Can Be Used On Screw Machines, Turret Lathes, Drilling And Milling Machines. Great For Light Cut, Repair Work, Or Simply For Enlarging Holes. Always Keep Reamers Clean, And Used With Machine Oil For Long Service Use..
Material And Coating: Made Of High-Speed Steel, The Reamers Have Combination Of Hardness And Toughness For Wear Resistance. The Cutter Body Is Sturdy And Damage-Resistant, With Strong Heat Resistance That Stable Processing. Features Just The Base Substrate Without Any Coatings, Suitable For Wide Ranges Of Applications..
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #4
Accusize Industrial Tools Over and Under Sizes 0.1240'' Thru 0.5010'' HSS M2 Premium Chucking Reamer Set, Right Hand Cut, 14pcs/Set, 5528-SX00
Asin: B098PFW9RF | Model: 5528-SX00 | PartNumber: 5528-SX00 | Ean: 0663566024929 | UPC: 663566024929
Features
- Over & Under Sizes 0.1240" thru 0.5010"
- Made from premium M2 H.S.S. Chucking reamers are designed for accurate reaming in most materials using all types of equipment including screw machines, turret lathes, drill presses, and machining centers
- They are regularly pointed with a 45 chamfer. The straight-flute design is recommended for most general-purpose reaming
- Thru 1/2 diameter +.0002 -.0000. Above 1/2 to 5/8 +.0003 -.0000. Above 5/8 to 1-1/2 +.0001 -.0004
- Straight Flute, Right-Hand Cut; Straight Shank; High Speed Steel
- See more on Amazon...
They Are Regularly Pointed With A 45°Chamfer. The Straight-Flute Design Is Recommended For Most General-Purpose Reaming.
Straight Flute, Right-Hand Cut; Straight Shank; High Speed Steel.
Thru 1/2" Diameter +.0002" -.0000". Above 1/2" To 5/8" +.0003" -.0000". Above 5/8" To 1-1/2" +.0001" -.0004.
Made From Premium M2 H.S.S. Chucking Reamers Are Designed For Accurate Reaming In Most Materials Using All Types Of Equipment Including Screw Machines, Turret Lathes, Drill Presses, And Machining Centers.
Brand: Accusize Industrial Tools | Manufacturer: Accusize Co., Ltd.
Dimensions: 2.36 x 14.17 x 9.45 inches | Weight: 2.20 pounds
See On Amazon #5
5PCS M2 HSS Taper Chucking Reamer Set,3/8",1/2",5/8",3/4",1 Reamer Fit 1/2" Round Shank,Bridge/Construction Reamer Drill Bit for Steel Metal Wood Alloy to Align Existing Hole and Enlarge Hole Reamer
Asin: B0CWRLL4BP | Model: BR-010 | PartNumber: BR-010
Features
- M2 HSS taper chucking reamer 5pcs set including 3/8",1/2",5/8",3/4" and 1 fit 1/2" shank chuck with 5-Spiral Flute. The bridge construction reamer bit is not a drill bit,only aligning reamer to aligh holes which are pre-drilled.If you need to enlarge a hole, you must first have an existing hole and then use our taper reamer to enlarge it
- The heavy duty high-speed steel bridge reamer is also called construction reamers,it used for aligning an existing hole and enlarging undersized hole prior to bolt or rivet installation.Our taper reamer bit aligns and enlarges pre-drilled holes ready for bolting
- Makes reaming holes out extremely easier than using large drill bits,the reamed hole is smooth without tear-outs. But there must be an existing hole or pilot hole with a diameter smaller than our bridge steel reamer bit before use
- The tapered point design permits the tapered reamer for metal to enter into the overlapping holes of out-of-line,make the bolt holes line up.Enlarging the holes in the steering knuckles and pitman arm
- Commonly used in bridge,construction,steel erection and automotive truck trailer industries,our bridge/construction reamer bit for steel,metal,alloy aluminum,brass,plastic,iron,nickel,copper,cast iron etc.Three symmetrically placed flats on shank provide positive grip in portable electric and pneumatic tools
- See more on Amazon...
Makes Reaming Holes Out Extremely Easier Than Using Large Drill Bits,The Reamed Hole Is Smooth Without Tear-Outs. But There Must Be An Existing Hole Or Pilot Hole With A Diameter Smaller Than Our Bridge Steel Reamer Bit Before Use.
Commonly Used In Bridge,Construction,Steel Erection And Automotive Truck Trailer Industries,Our Bridge/Construction Reamer Bit For Steel,Metal,Alloy Aluminum,Brass,Plastic,Iron,Nickel,Copper,Cast Iron Etc.Three Symmetrically Placed Flats On Shank Provide Positive Grip In Portable Electric And Pneumatic Tools.
The Tapered Point Design Permits The Tapered Reamer For Metal To Enter Into The Overlapping Holes Of Out-Of-Line,Make The Bolt Holes Line Up.Enlarging The Holes In The Steering Knuckles And Pitman Arm.
The Heavy Duty High-Speed Steel Bridge Reamer Is Also Called Construction Reamers,It Used For Aligning An Existing Hole And Enlarging Undersized Hole Prior To Bolt Or Rivet Installation.Our Taper Reamer Bit Aligns And Enlarges Pre-Drilled Holes Ready For Bolting.
Brand: NOVINO | Manufacturer: NOVINO
See On Amazon #6
uxcell 1/8" 3/16" 1/4" 5/16" Chucking Reamer H7 Accuracy High Speed Steel Lathe Machine Reamer 6 Straight Flutes Round Shank Milling Cutter Tool Reamer Set for Bore Machining 4pcs
Asin: B09C8M58TC | Model: a20103000ux0036 | PartNumber: a20103000ux0036
Features
- Specifications: Cutting diameter: 1/8", 3/16", 1/4", 5/16"; accuracy class: H7. The hand reamers ream the cylindrical shape. Good for general purpose applications. Straight round shank provides a stable holding and can be used with a variety of tool holding systems.
- Material and Coating: Made of high-speed steel, the reamers have combination of hardness and toughness for wear resistance. The cutter body is sturdy and damage-resistant, with strong heat resistance that stable processing. Features just the base substrate without any coatings, suitable for wide ranges of applications.
- Wide Applications: Sharp blade for easy cutting and high efficiency. Used for processing, and bore machining. Suitable for accurate reaming in aluminum, cast iron, copper, plastic, wood, alloy, and other soft materials.
- Easy to Use: Can be used on screw machines, turret lathes, drilling and milling machines. Great for light cut, repair work, or simply for enlarging holes. Always keep reamers clean, and used with machine oil for long service use.
- Straight Flute: Straight flute tools allow chips to collect in the flutes when cutting. Well suited for most applications in shallow cuts.
- See more on Amazon...
Wide Applications: Sharp Blade For Easy Cutting And High Efficiency. Used For Processing, And Bore Machining. Suitable For Accurate Reaming In Aluminum, Cast Iron, Copper, Plastic, Wood, Alloy, And Other Soft Materials..
Straight Flute: Straight Flute Tools Allow Chips To Collect In The Flutes When Cutting. Well Suited For Most Applications In Shallow Cuts..
Easy To Use: Can Be Used On Screw Machines, Turret Lathes, Drilling And Milling Machines. Great For Light Cut, Repair Work, Or Simply For Enlarging Holes. Always Keep Reamers Clean, And Used With Machine Oil For Long Service Use..
Material And Coating: Made Of High-Speed Steel, The Reamers Have Combination Of Hardness And Toughness For Wear Resistance. The Cutter Body Is Sturdy And Damage-Resistant, With Strong Heat Resistance That Stable Processing. Features Just The Base Substrate Without Any Coatings, Suitable For Wide Ranges Of Applications..
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #7
29PCS HSS Chucking Reamer Set 1/16-1/2-Inch by 64ths with Wooden Case
Asin: B09WDJVF58 | Ean: 0722704103893 | UPC: 722704103893
Features
- 29 PC Set: 1/16'' through 1/2'' By 64ths, Fractional size
- HSS M2 chucking reamer set; Straight shank; Straight flute, right-hand cut
- Can be used with a wide variety of tool holding systems. Good for use in through or blind holes and used for light cut, repair work, removing stock
- Designed for accurate reaming in stainless steel, alloy steel and other metal materials, used on equipment including screw machines, turret lathes, drill presses and machining centers
- Includes a wooden fitted case
- See more on Amazon...
Can Be Used With A Wide Variety Of Tool Holding Systems. Good For Use In Through Or Blind Holes And Used For Light Cut, Repair Work, Removing Stock.
Includes A Wooden Fitted Case.
Designed For Accurate Reaming In Stainless Steel, Alloy Steel And Other Metal Materials, Used On Equipment Including Screw Machines, Turret Lathes, Drill Presses And Machining Centers.
Hss M2 Chucking Reamer Set; Straight Shank; Straight Flute, Right-Hand Cut.
Brand: SP1stopmall | Manufacturer: SP1stopmall
See On Amazon #8
M2 HSS Taper Chucking Reamer 5pcs Set, 3/8", 1/2", 9/16", 5/8", 3/4", Fit 3/8" or 1/2" Shank Chuck, Spiral Flute, Bridge/Construction Reamer for Steel, Alloy, Aluminum, Wood, Plastic
Asin: B0BRPPWBWS
Features
- [M2 HSS material]: Compared to other commonly used lower grade HSS, M2 has 50% more Tungsten and 150% more Molybdenum, both of which are key elements in improving the durability.
- [Spiral Flutes & Safety stop]: Left Helix/Right Hand Cut sheers chips away from operator. Safety collar stop to prevent over penetration and operator loss of stability.
- [Tapered point]: allow entry into overlapping holes.
- [Application]: enlarge or align existing holes through mild steel, alloys, aluminum, wood, plastic, fiberglass or any similar hardness material prior to rivet or bolt installation. Commonly used in bridge, construction, steel erection/fabrication, and automotive (truck & trailer) industries. Up to 3/8(10mm) thick mild steel for impact driver or 1 (25mm) thick for Magnetic drill press. Notice: it requires existing hole or a pilot hole would be needed.
- [Sizes]: 5 pieces, including 3/8 (fit 3/8'' shank chuck), 1/2, 5/8 , 9/16 and 3/4 (fit 1/2'' shank chuck).
- See more on Amazon...
[Tapered Point]: Allow Entry Into Overlapping Holes..
[Sizes]: 5 Pieces, Including 3/8" (Fit 3/8'' Shank Chuck), 1/2", 5/8" , 9/16" And 3/4" (Fit 1/2'' Shank Chuck)..
[Application]: Enlarge Or Align Existing Holes Through Mild Steel, Alloys, Aluminum, Wood, Plastic, Fiberglass Or Any Similar Hardness Material Prior To Rivet Or Bolt Installation. Commonly Used In Bridge, Construction, Steel Erection/Fabrication, And Automotive (Truck & Trailer) Industries. Up To 3/8"(10Mm) Thick Mild Steel For Impact Driver Or 1" (25Mm) Thick For Magnetic Drill Press. Notice: It Requires Existing Hole Or A Pilot Hole Would Be Needed..
[Spiral Flutes & Safety Stop]: Left Helix/Right Hand Cut Sheers Chips Away From Operator. Safety Collar Stop To Prevent Over Penetration And Operator Loss Of Stability..
Brand: Jerax tools | Manufacturer: Jerax tools
See On Amazon #9
uxcell Chucking Reamer Set Lathe Machine Reamer Straight Flute Milling Cutter High Speed Steel H8 Tolerance (2mm 3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm) 9pcs
Asin: B08ZM48Q6T | Model: a20102800ux0556 | PartNumber: a20102800ux0556
Features
- Chucking Reamer: Size: 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm; tolerance: H8. Features just the base substrate without any additional coatings, good for wide ranges of applications
- Material: High-speed steel tools are with combination of hardness and toughness for wear resistance, suitable for general purpose applications
- Applications: Cut and remove the thin layer metal on hole surface that has been processed, mainly to improve the precision of holes and reduce the surface roughness
- Features: Straight flute tools allow chips to collect in the flutes and can make shallow cuts in most applications
- How to Use: Chucking reamers (machine reamers) are used on lathes, drill presses and screw machines. Designed for accurate reaming in stainless steel, aluminum, copper, alloy, plastic
- See more on Amazon...
Applications: Cut And Remove The Thin Layer Metal On Hole Surface That Has Been Processed, Mainly To Improve The Precision Of Holes And Reduce The Surface Roughness.
How To Use: Chucking Reamers (Machine Reamers) Are Used On Lathes, Drill Presses And Screw Machines. Designed For Accurate Reaming In Stainless Steel, Aluminum, Copper, Alloy, Plastic.
Features: Straight Flute Tools Allow Chips To Collect In The Flutes And Can Make Shallow Cuts In Most Applications.
Material: High-Speed Steel Tools Are With Combination Of Hardness And Toughness For Wear Resistance, Suitable For General Purpose Applications.
Brand: uxcell | Manufacturer: uxcell
See On Amazon #10
Lichamp 5pcs Reamer Drill Bit, 3/8" 1/2" 9/16" 5/8" 3/4" High Speed Steel Chucking Reamer Set Tapered Reamer for Metal
Asin: B0CCJ1XGKP
Features
- Unique Tapered Reamer - Construction grade reamer set are used to align existing holes prior to bolt or rivet installation. Increased taper for ease in hole entry, especially for drilling holes bigger in pitman arm and steering knuckles.
- M2 High Speed Steel - HSS M2 ensures sharp and fast execution in most hard steel material for clean results, while provides good wear resistance in mild steels and non-ferrous materials.
- Wide Applications - Works well in free cutting and carbon steels, as well as soft, non-ferrous materials such as aluminum, brass and copper.
- Five Grooves Fast Drilling - Reversed spiral push chips forward and are ideal for through-hole applications, reduces the friction, runs cooler, performs well in heat, corrosion and rust resistance.
- Safe Straight Shank - Round shank with 3 flats to prevent slipping in the drill chuck, safety flange/ stop collar to prevent the reamer running through the hole.
- See more on Amazon...
Wide Applications - Works Well In Free Cutting And Carbon Steels, As Well As Soft, Non-Ferrous Materials Such As Aluminum, Brass And Copper..
Safe Straight Shank - Round Shank With 3 Flats To Prevent Slipping In The Drill Chuck, Safety Flange/ Stop Collar To Prevent The Reamer Running Through The Hole..
Five Grooves Fast Drilling - Reversed Spiral Push Chips Forward And Are Ideal For Through-Hole Applications, Reduces The Friction, Runs Cooler, Performs Well In Heat, Corrosion And Rust Resistance..
M2 High Speed Steel - Hss M2 Ensures Sharp And Fast Execution In Most Hard Steel Material For Clean Results, While Provides Good Wear Resistance In Mild Steels And Non-Ferrous Materials..
Brand: Lichamp | Manufacturer: LICHAMP
See On Amazon #11
Drill America - DWRRTS1INCH 1" High Speed Steel Taper Shank Straight Flute Chucking Reamer, DWR Series
Asin: B00DMAJDGW | Model: DWRRTS1INCH | PartNumber: DWRRTS1INCH | Ean: 0887861146166 | UPC: 887861146166
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Morse taper shank allows the tool to be inserted directly into the machine's spindle to facilitate high-torque applications such as large cut diameters
- Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts
- Designed for accurate reaming in most materials using all types of equipment including screw machines, turret lathes, drill presses and machining centers
- See more on Amazon...
Morse Taper Shank Allows The Tool To Be Inserted Directly Into The Machine's Spindle To Facilitate High-Torque Applications Such As Large Cut Diameters.
Designed For Accurate Reaming In Most Materials Using All Types Of Equipment Including Screw Machines, Turret Lathes, Drill Presses And Machining Centers.
Straight Flute Tools Allow Chips To Collect In The Flutes As They Cut And Are Well Suited For Most Applications In Shallow Cuts.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Brand: Drill America | Manufacturer: Drill America
Weight: 0.99 Pounds
See On Amazon #12
SHARS 14 PC 0.124-0.501" HSS Chucking Reamer Set 404-7303 P)
Asin: B081ZC427R
Features
- Size Range Reamer: 0.124-0.501
- Straight Shank
- Straight Flute
- Fractional sizes
- Number of Pieces: 14
- See more on Amazon...
Straight Flute.
Number Of Pieces: 14.
Fractional Sizes.
Straight Shank.
Brand: Shars | Manufacturer: Shars
Weight: 3.00 pounds
See On Amazon #13
1 Bridge Construction Reamer Drill Bit, M2 HSS Taper Chucking Reamer for Steel Alloy Metal Wood Plastic, 1/2" Non-Slip Shank, 5-Spiral Flutes Car Reamer, to Align or Enlarge Holes, 25mm
Asin: B0CFJBNBN9
Features
- Seamlessly and Expertly - The bridge reamer, also known as construction reamers, is used to align or enlarge or smooth Predrilled holes to 1" and fit precisely before installing bolts or rivets. This heavy-duty 1" reamer drill bit is crafted to ensure seamless and expert performance in your projects.
- Engineered for longevity, our 1 conduit reamer boasts a robust construction using M2 high-speed steel. Its five long tapped right-hand spiral flutes, combined with finely ground edges, enable efficient drilling and debris removal, ensuring reliable performance even under heavy-duty usage.
- Precision-driven features Our 1 reamer bit is meticulously designed for optimal performance. Equipped with a round 3-sided shank, a tapered point, and a safe stop mechanism, it guarantees a reliable grip within the chuck, steady reaming of imperfect holes, and automatic drill stoppage once the hole is finished.
- All-in-one solution With the ability to handle diverse materials such as steel, metal, alloy aluminum, brass, copper, iron, nickel, plastic, and PVC pipes, our 1 reamer drill bit is a versatile tool for woodworking and metalworking projects. From bridge construction and steel erection to automotive truck trailer maintenance, it's the go-to solution.
- User Tips: 1. Always wear appropriate safety gear. 2. Securely mount the reamer drill bit in the chuck of your portable electric or pneumatic tools. 3. Position the bit in the Predrilled Hole, gradually increase speed, maintain pressure, keep the tool steady, and add cutting oil. 4. Reduce speed near the desired hole size for a smooth finish.
- See more on Amazon...
Precision-Driven Features – Our 1" Reamer Bit Is Meticulously Designed For Optimal Performance. Equipped With A Round 3-Sided Shank, A Tapered Point, And A Safe Stop Mechanism, It Guarantees A Reliable Grip Within The Chuck, Steady Reaming Of Imperfect Holes, And Automatic Drill Stoppage Once The Hole Is Finished..
User Tips: 1. Always Wear Appropriate Safety Gear. 2. Securely Mount The Reamer Drill Bit In The Chuck Of Your Portable Electric Or Pneumatic Tools. 3. Position The Bit In The Predrilled Hole, Gradually Increase Speed, Maintain Pressure, Keep The Tool Steady, And Add Cutting Oil. 4. Reduce Speed Near The Desired Hole Size For A Smooth Finish..
All-In-One Solution – With The Ability To Handle Diverse Materials Such As Steel, Metal, Alloy Aluminum, Brass, Copper, Iron, Nickel, Plastic, And Pvc Pipes, Our 1" Reamer Drill Bit Is A Versatile Tool For Woodworking And Metalworking Projects. From Bridge Construction And Steel Erection To Automotive Truck Trailer Maintenance, It's The Go-To Solution..
Engineered For Longevity, Our 1" Conduit Reamer Boasts A Robust Construction Using M2 High-Speed Steel. Its Five Long Tapped Right-Hand Spiral Flutes, Combined With Finely Ground Edges, Enable Efficient Drilling And Debris Removal, Ensuring Reliable Performance Even Under Heavy-Duty Usage..
Brand: DKIBBITH | Manufacturer: DKIBBITH
See On Amazon #14
M35 HSS 1/2'' 3/4'' 3/8'' 5/8" Taper Chucking Reamer for Enlarging Existing Holes, Fit 1/2" Shank Chuck, Spiral Flute, Bridge/Construction Reamer for Steel, Alloy, Aluminum, Wood, Plastic
Asin: B0C52QKDMY
Features
- [M35 HSS material]: Made of top grade M35 High Speed Steel. STRONGER and MORE DURABLE than M2 HSS.
- [Spiral Flutes & Safety stop]: Left Helix/Right Hand Cut sheers chips away from operator. Safety collar stop to prevent over penetration and operator loss of stability.
- [Tapered point]: allow entry into overlapping holes.
- [Application]: enlarge or align existing holes through mild steel, alloys, aluminum, wood, plastic, fiberglass or any similar hardness material prior to rivet or bolt installation. Commonly used in bridge, construction, steel erection/fabrication, and automotive (truck & trailer) industries. Up to 3/8(10mm) thick mild steel for impact driver or 1 (25mm) thick for Magnetic drill press. Notice: it requires existing hole or a pilot hole would be needed.
- [Sizes]: 4 pieces, including 3/8 (fit 3/8'' shank chuck), 1/2, 5/8 and 3/4 (fit 1/2'' shank chuck).
- See more on Amazon...
[Tapered Point]: Allow Entry Into Overlapping Holes..
[Sizes]: 4 Pieces, Including 3/8" (Fit 3/8'' Shank Chuck), 1/2", 5/8" And 3/4" (Fit 1/2'' Shank Chuck)..
[Application]: Enlarge Or Align Existing Holes Through Mild Steel, Alloys, Aluminum, Wood, Plastic, Fiberglass Or Any Similar Hardness Material Prior To Rivet Or Bolt Installation. Commonly Used In Bridge, Construction, Steel Erection/Fabrication, And Automotive (Truck & Trailer) Industries. Up To 3/8"(10Mm) Thick Mild Steel For Impact Driver Or 1" (25Mm) Thick For Magnetic Drill Press. Notice: It Requires Existing Hole Or A Pilot Hole Would Be Needed..
[Spiral Flutes & Safety Stop]: Left Helix/Right Hand Cut Sheers Chips Away From Operator. Safety Collar Stop To Prevent Over Penetration And Operator Loss Of Stability..
Brand: Jerax tools | Manufacturer: Jerax tools
See On Amazon #15
Accusize Industrial Tools 1'' H.S.S. M2 Straight Shank Straight Flute Chucking Reamer, Flute Length 2-3/4'', Oal 10-1/2'', 8 Flute, 5015-0285
Asin: B00U6JYQA0 | Model: 5015-0285 | PartNumber: 5015-0285 | Ean: 0641799805263 | UPC: 641799805263
Features
- Straight Shank, Straight Flute, Right-hand Cut
- Thru 1/4 diameter: +0.0001 to +0.0004 - 0.0000
- Above 1/4 to 1: +0.0001 to +0.0005 - 0.0000
- Above 1 to 1-1/2: +0.0002 to +0.0006 - 0.0000
- Straight flute design. Bright finished.
- Crafted from premium M2 high-speed steel for exceptional durability and sharpness across a variety of materials.
- Offers a 1 diameter (Dec. Dia.: 1.0000) with precise tolerance of +0.0001 to +0.0005, ideal for precision machining.
- Equipped with 8 straight flutes for superior chip evacuation and a smooth finish, enhancing overall machining quality.
- Features standard 45 chamfered cutting edges for effective cutting, deburring, and finishing operations.
- Measurements include a flute length of 2-3/4 and an overall length of 10-1/2, suited for diverse machining tasks.
- See more on Amazon...
Above 1/4" To 1": +0.0001" To +0.0005" - 0.0000".
Measurements Include A Flute Length Of 2-3/4" And An Overall Length Of 10-1/2", Suited For Diverse Machining Tasks..
Offers A 1" Diameter (Dec. Dia.: 1.0000") With Precise Tolerance Of +0.0001" To +0.0005", Ideal For Precision Machining..
Equipped With 8 Straight Flutes For Superior Chip Evacuation And A Smooth Finish, Enhancing Overall Machining Quality..
Straight Flute Design. Bright Finished..
Crafted From Premium M2 High-Speed Steel For Exceptional Durability And Sharpness Across A Variety Of Materials..
Above 1" To 1-1/2": +0.0002" To +0.0006" - 0.0000".
Features Standard 45° Chamfered Cutting Edges For Effective Cutting, Deburring, And Finishing Operations..
Thru 1/4" Diameter: +0.0001" To +0.0004" - 0.0000".
Brand: Accusize Industrial Tools | Manufacturer: Accusize Co., Ltd.
Dimensions: 11.02 x 1.18 x 1.18 Inches | Weight: 1.55 Kilograms
See On Amazon #16
M2 HSS Taper Chucking Reamer, Bridge Construction Reamer Drill Bit 4pcs Set, to Align or Enlarge Holes, Bridge/Construction Reamer for Steel, Alloy, Aluminum, Wood, Plastic
Asin: B0CDG57NNL | Model: GTCR901 | PartNumber: GTCR901
Features
- Designed for aligning an existing hole and enlarging undersized hole. This Taper Chucking Reamer Kit can increase the taper to facilitate hole access, especially drilling larger holes in the link arms and steering knuckles.
- [Made of M2 HSS]: This heavy duty high-speed steel bridge reamer kit is made of M2 High Speed Steel which ensures sharp and fast execution in most strong steel material.
- [Tapered point]: The tapered point design allows the reamer bit to enter non-linear, overlapping holes to align bolt holes. Enlarge the holes in the steering knuckle and linkage arms.
- [Application]: Commonly used in bridge, construction, steel erection/fabrication, and automotive (truck & trailer) industries. Designed to use in stainless steel, aluminum, copper, alloy, plastic.
- [Sizes]: 4 pieces in 1 kit, including 3/8 (fit 3/8'' shank chuck), 1/2, 5/8 and 3/4 (fit 1/2'' shank chuck).
- [Notice]: Up to 3/8(10mm) thick mild steel for impact driver or 1 (25mm) thick for Magnetic drill press. Notice: it requires existing hole or a pilot hole would be needed.
- See more on Amazon...
[Tapered Point]: The Tapered Point Design Allows The Reamer Bit To Enter Non-Linear, Overlapping Holes To Align Bolt Holes. Enlarge The Holes In The Steering Knuckle And Linkage Arms..
[Sizes]: 4 Pieces In 1 Kit, Including 3/8" (Fit 3/8'' Shank Chuck), 1/2", 5/8" And 3/4" (Fit 1/2'' Shank Chuck)..
[Notice]: Up To 3/8"(10Mm) Thick Mild Steel For Impact Driver Or 1" (25Mm) Thick For Magnetic Drill Press. Notice: It Requires Existing Hole Or A Pilot Hole Would Be Needed..
[Application]: Commonly Used In Bridge, Construction, Steel Erection/Fabrication, And Automotive (Truck & Trailer) Industries. Designed To Use In Stainless Steel, Aluminum, Copper, Alloy, Plastic..
[Made Of M2 Hss]: This Heavy Duty High-Speed Steel Bridge Reamer Kit Is Made Of M2 High Speed Steel Which Ensures Sharp And Fast Execution In Most Strong Steel Material..
Brand: Generic | Manufacturer: WS
See On Amazon #17
SHARS 1/8-1/2" HSS Chucking Reamer Set 404-7328 S)
Asin: B081VW4Z99
Features
- Size Range Reamer: 1/8-1/2 By 16ths
- Straight Shank
- Straight Flute
- Fractional sizes
- Number of Pieces: 7
- See more on Amazon...
Straight Flute.
Number Of Pieces: 7.
Fractional Sizes.
Straight Shank.
Brand: Shars | Manufacturer: Shars
Weight: 4.00 pounds
See On Amazon #18
Mriuuod Chucking Reamer Set, 1/8" 3/16" 1/4" 5/16" Reamer, H7 Straight Flutes Lathe Machine Reamer, High Speed Steel Round Shank Milling Cutting Tool Reamer for Bore Machining 4pcs
Asin: B0CDPVFFKG
Brand: Mriuuod | Manufacturer: Mriuuod
See On Amazon #19
uxcell Chucking Reamer Set Lathe Machine Reamer Straight Flute Milling Cutter High Speed Steel H7 Tolerance (3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm 11mm 12mm) 10pcs
Asin: B08ZM5TN75 | Model: a20102800ux0553 | PartNumber: a20102800ux0553
Features
- Chucking Reamer: Size: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm; tolerance: H7. Features just the base substrate without any additional coatings, good for wide ranges of applications
- Material: High-speed steel tools are with combination of hardness and toughness for wear resistance, suitable for general purpose applications
- Applications: Cut and remove the thin layer metal on hole surface that has been processed, mainly to improve the precision of holes and reduce the surface roughness
- Features: Straight flute tools allow chips to collect in the flutes and can make shallow cuts in most applications
- How to Use: Chucking reamers (machine reamers) are used on lathes, drill presses and screw machines. Designed for accurate reaming in stainless steel, aluminum, copper, alloy, plastic
- See more on Amazon...
Applications: Cut And Remove The Thin Layer Metal On Hole Surface That Has Been Processed, Mainly To Improve The Precision Of Holes And Reduce The Surface Roughness.
How To Use: Chucking Reamers (Machine Reamers) Are Used On Lathes, Drill Presses And Screw Machines. Designed For Accurate Reaming In Stainless Steel, Aluminum, Copper, Alloy, Plastic.
Features: Straight Flute Tools Allow Chips To Collect In The Flutes And Can Make Shallow Cuts In Most Applications.
Material: High-Speed Steel Tools Are With Combination Of Hardness And Toughness For Wear Resistance, Suitable For General Purpose Applications.
Brand: uxcell | Manufacturer: uxcell
See On Amazon #20
Accusize Industrial Tools 1-13 mm by 0.5 mm High-Speed Steel Chucking Reamer Set in a Fitted Case, Set of 25 Pieces, 5500-SB00
Asin: B00HRD3AAK | Model: 5500-SB00 | PartNumber: 5500-SB00 | Ean: 0641799805430, 0663566007724 | UPC: 663566007724, 641799805430
Features
- HSS chucking reamer set; Straight shank; Straight flute, right-hand cut
- Range is 1 to 13 millimeters by 0.5 millimeter
- Diameter tolerance is +0.0001 to +0.0005 - 0.0000
- Includes a wooden fitted case
- Set of 25 pieces
- See more on Amazon...
Diameter Tolerance Is +0.0001" To +0.0005" - 0.0000".
Set Of 25 Pieces.
Includes A Wooden Fitted Case.
Range Is 1 To 13 Millimeters By 0.5 Millimeter.
Brand: Accusize Industrial Tools | Manufacturer: Accusize Co., Ltd.
Dimensions: 12.20 x 3.54 x 9.45 Inches | Weight: 2.30 Kilograms
See On Amazon #21
Rannb Chucking Reamer Adjustable Hand Reamer Adjustment Range 21-23mm
Asin: B089GG5GC9 | Model: wby1614 | PartNumber: wby1614 | Ean: 0778601987821 | UPC: 778601987821
Features
- Material The Chucking Reamer is made of premium HSS with good hardness and toughness.
- Square End Square end allows the user to turn the reamer by hand with an adjustable wrench or straight handle tap wrench.
- How to Adjust Blades are adjusted by loosening one nut and tightening the other.
- Adjustment Range 21-23mm; After reaming the hole can get the exact size and shape.
- Applicable Material A3 steel, alloy steel, cast iron, cast steel, aluminum and other metal materials.
- See more on Amazon...
【How To Adjust】Blades Are Adjusted By Loosening One Nut And Tightening The Other..
【Applicable Material】A3 Steel, Alloy Steel, Cast Iron, Cast Steel, Aluminum And Other Metal Materials..
【Adjustment Range】21-23Mm; After Reaming The Hole Can Get The Exact Size And Shape..
【Square End】Square End Allows The User To Turn The Reamer By Hand With An Adjustable Wrench Or Straight Handle Tap Wrench..
Brand: Rannb | Manufacturer: Rannb
See On Amazon #22
uxcell Hand Reamers Set H8 Accuracy Alloy Tool Steel 6 Flutes Straight Shank Milling Cutter Tool 10pcs (3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm)
Asin: B09C8P6N36 | Model: a20103000ux0076 | PartNumber: a20103000ux0076
Features
- Specifications: cutting diameter: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm; accuracy class: H8. The hand reamers ream the cylindrical shape. Good for general purpose applications.
- Material and Coating: Made of alloy tool steel, the reamers have high hardness, durability, and provide finish cuts. Features just the base substrate without any coatings, suitable for wide ranges of applications.
- Wide Applications: Used for handicraft processing, and bore machining. Suitable for accurate reaming in aluminum, cast iron, copper, plastic, wood, and other soft materials.
- Easy to Use: Can be hand operated by use of wrenches. Great for light cut, repair work, or simply for enlarging holes. Always keep reamers clean, and used with machine oil for long service use.
- Straight Flute: Straight flute tools allow chips to collect in the flutes when cutting. Well suited for most applications in shallow cuts.
- See more on Amazon...
Wide Applications: Used For Handicraft Processing, And Bore Machining. Suitable For Accurate Reaming In Aluminum, Cast Iron, Copper, Plastic, Wood, And Other Soft Materials..
Straight Flute: Straight Flute Tools Allow Chips To Collect In The Flutes When Cutting. Well Suited For Most Applications In Shallow Cuts..
Easy To Use: Can Be Hand Operated By Use Of Wrenches. Great For Light Cut, Repair Work, Or Simply For Enlarging Holes. Always Keep Reamers Clean, And Used With Machine Oil For Long Service Use..
Material And Coating: Made Of Alloy Tool Steel, The Reamers Have High Hardness, Durability, And Provide Finish Cuts. Features Just The Base Substrate Without Any Coatings, Suitable For Wide Ranges Of Applications..
Brand: uxcell | Manufacturer: uxcell
See On Amazon #23
uxcell Chucking Reamer Set Lathe Machine Reamer Straight Flute Milling Cutter High Speed Steel H7 Tolerance (3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm) 8pcs
Asin: B08ZM5NTWB | Model: a20102800ux0551 | PartNumber: a20102800ux0551
Features
- Chucking Reamer: Size: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm; tolerance: H7. Features just the base substrate without any additional coatings, good for wide ranges of applications
- Material: High-speed steel tools are with combination of hardness and toughness for wear resistance, suitable for general purpose applications
- Applications: Cut and remove the thin layer metal on hole surface that has been processed, mainly to improve the precision of holes and reduce the surface roughness
- Features: Straight flute tools allow chips to collect in the flutes and can make shallow cuts in most applications
- How to Use: Chucking reamers (machine reamers) are used on lathes, drill presses and screw machines. Designed for accurate reaming in stainless steel, aluminum, copper, alloy, plastic
- See more on Amazon...
Applications: Cut And Remove The Thin Layer Metal On Hole Surface That Has Been Processed, Mainly To Improve The Precision Of Holes And Reduce The Surface Roughness.
How To Use: Chucking Reamers (Machine Reamers) Are Used On Lathes, Drill Presses And Screw Machines. Designed For Accurate Reaming In Stainless Steel, Aluminum, Copper, Alloy, Plastic.
Features: Straight Flute Tools Allow Chips To Collect In The Flutes And Can Make Shallow Cuts In Most Applications.
Material: High-Speed Steel Tools Are With Combination Of Hardness And Toughness For Wear Resistance, Suitable For General Purpose Applications.
Brand: uxcell | Manufacturer: uxcell
See On Amazon #24
HHIP 2006-3010 5/32" High Speed Steel Straight Shank Chucking Reamer, 1" Flute Length, 4" Overall Length, 5/32"
Asin: B076DLLTYP | Model: 2006-3010 | PartNumber: 2006-3010 | Ean: 0769053091655 | UPC: 769053091655
Features
- ANSI standard
- Made of high speed steel
- Straight flute
- 45 degree chamfer allows gradual starting load
- 4-inches overall length
- See more on Amazon...
Straight Flute.
4-Inches Overall Length.
45 Degree Chamfer Allows Gradual Starting Load.
Made Of High Speed Steel.
First Available: 01/28/2018
Brand: HHIP | Manufacturer: ABS Import Tools Inc.
Dimensions: 6.00 x 3.00 x 1.00 Inches
See On Amazon #25
Micro-Mark 7-piece HSS Chucking Reamer Set, 1/8 Inch - 1/2 Inch
Asin: B07958LTXJ | Model: 82773 | PartNumber: 82773 | Ean: 0818305027796 | UPC: 818305027796
First Available: 06/02/2023
Brand: Micro-Mark | Manufacturer: Micro-Mark
Dimensions: 1.00 x 8.50 x 5.25 Inches
See On Amazon #26
10 PCS Reamer Set 1/8-15/32 Inch, HSS H8 Chucking Reamer Set for Lathe Machine, Straight Chucking Machine Cutter Milling Reamer Kit (3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm 11mm 12mm)
Asin: B0B8C89DGC | Model: KPJD02 | PartNumber: KPJD02
Features
- Size: 10pcs, the precision is H8, the diameter of the shank is 3/4/5/6/7/8/9/10/11/12mm (0.12/0.16/0.20/0.24/0.28/0.31/0.35/0.39/0.43/0.47 inch), no additional coating required
- Unique Design: The straight flute design allows the chips generated after cutting to collect in the flute, suitable for most applications in shallow cutting. Universal chamfered round shank design, practical and wide-ranging, clamping and tightening, can be used with a variety of tool shank systems
- High-Quality Material: The product is made of high-quality high-speed steel, which has higher hardness, heat resistance and wear resistance than ordinary materials, effectively prolonging the use time of the milling machine cutter
- High Craftsmanship: The lathe machine reamer is equipped with a sharp cutting edge, which makes the chucking reamer have strong cutting ability, high precision, and clean cutting, making your work easier
- Wide Range of Applications: The chucking machine reamer can be used for hole processing, suitable for reaming stainless steel, aluminum, copper, alloy, plastic and other materials, and can be installed on lathes, drilling machines, screw machines and other equipment to improve the machining accuracy of holes and reduce the surface roughness
- See more on Amazon...
High-Quality Material: The Product Is Made Of High-Quality High-Speed Steel, Which Has Higher Hardness, Heat Resistance And Wear Resistance Than Ordinary Materials, Effectively Prolonging The Use Time Of The Milling Machine Cutter.
Wide Range Of Applications: The Chucking Machine Reamer Can Be Used For Hole Processing, Suitable For Reaming Stainless Steel, Aluminum, Copper, Alloy, Plastic And Other Materials, And Can Be Installed On Lathes, Drilling Machines, Screw Machines And Other Equipment To Improve The Machining Accuracy Of Holes And Reduce The Surface Roughness.
High Craftsmanship: The Lathe Machine Reamer Is Equipped With A Sharp Cutting Edge, Which Makes The Chucking Reamer Have Strong Cutting Ability, High Precision, And Clean Cutting, Making Your Work Easier.
Unique Design: The Straight Flute Design Allows The Chips Generated After Cutting To Collect In The Flute, Suitable For Most Applications In Shallow Cutting. Universal Chamfered Round Shank Design, Practical And Wide-Ranging, Clamping And Tightening, Can Be Used With A Variety Of Tool Shank Systems.
Brand: PNYZIK | Manufacturer: PNYZIK
See On Amazon #27
uxcell 3/8" Chucking Reamer H7 Accuracy High Speed Steel Lathe Machine Reamer 6 Straight Flutes Round Shank Milling Cutter Tool for Bore Machining 2pcs
Asin: B091K782JP | Model: a20103000ux0048 | PartNumber: a20103000ux0048
Features
- Specifications: Cutting diameter: 3/8"; accuracy class: H7. The hand reamers ream the cylindrical shape. Good for general purpose applications. Straight round shank provides a stable holding and can be used with a variety of tool holding systems.
- Material and Coating: Made of high-speed steel, the reamers have combination of hardness and toughness for wear resistance. The cutter body is sturdy and damage-resistant, with strong heat resistance that stable processing. Features just the base substrate without any coatings, suitable for wide ranges of applications.
- Wide Applications: Sharp blade for easy cutting and high efficiency. Used for processing, and bore machining. Suitable for accurate reaming in aluminum, cast iron, copper, plastic, wood, alloy, and other soft materials.
- Easy to Use: Can be used on screw machines, turret lathes, drilling and milling machines. Great for light cut, repair work, or simply for enlarging holes. Always keep reamers clean, and used with machine oil for long service use.
- Straight Flute: Straight flute tools allow chips to collect in the flutes when cutting. Well suited for most applications in shallow cuts.
- See more on Amazon...
Wide Applications: Sharp Blade For Easy Cutting And High Efficiency. Used For Processing, And Bore Machining. Suitable For Accurate Reaming In Aluminum, Cast Iron, Copper, Plastic, Wood, Alloy, And Other Soft Materials..
Straight Flute: Straight Flute Tools Allow Chips To Collect In The Flutes When Cutting. Well Suited For Most Applications In Shallow Cuts..
Easy To Use: Can Be Used On Screw Machines, Turret Lathes, Drilling And Milling Machines. Great For Light Cut, Repair Work, Or Simply For Enlarging Holes. Always Keep Reamers Clean, And Used With Machine Oil For Long Service Use..
Material And Coating: Made Of High-Speed Steel, The Reamers Have Combination Of Hardness And Toughness For Wear Resistance. The Cutter Body Is Sturdy And Damage-Resistant, With Strong Heat Resistance That Stable Processing. Features Just The Base Substrate Without Any Coatings, Suitable For Wide Ranges Of Applications..
Brand: uxcell | Manufacturer: uxcell
See On Amazon #28
Yunnergo Optional M2 HSS Taper Chucking Reamer Set 4Pcs 3/8" 1/2" 5/8" 3/4", Single 1", 7/8", 7/16" for Aligning Existing Holes&Expanding Holes (1/2 inch)
Asin: B0CGRG9M9R
Features
- Drill bridge/construction reamer is a tool used for construction reaming, consisting of a drill bit reamer and a shank, which can accurately cut and form the required hole
- Advantages: The point is tapered to allow entry into overlapping holes, and the spiral groove can easily remove debris. It is made of high-quality HSS material, which has high hardness and durability
- Usage: Align the drill bit with the position where the hole needs to be drilled, align the existing hole and enlarge hole to ensure stability, and stop cutting in a timely manner according to the required depth of the hole. Note: It requires an existing hole or a guide hole
- This product has multiple models to choose from, please check the model to purchase. Chucking reamer set or single optional Hss drill bridge/construction reamer
- Widely used: Suitable for various materials, including solid wood, aluminum, brass, bronze, cast iron, copper, iron, metal, nickel, plastic, and steel. It is also suitable for other fields, such as construction, decoration, bridge, steel structure installation, and manual production
- See more on Amazon...
Usage: Align The Drill Bit With The Position Where The Hole Needs To Be Drilled, Align The Existing Hole And Enlarge Hole To Ensure Stability, And Stop Cutting In A Timely Manner According To The Required Depth Of The Hole. Note: It Requires An Existing Hole Or A Guide Hole.
Widely Used: Suitable For Various Materials, Including Solid Wood, Aluminum, Brass, Bronze, Cast Iron, Copper, Iron, Metal, Nickel, Plastic, And Steel. It Is Also Suitable For Other Fields, Such As Construction, Decoration, Bridge, Steel Structure Installation, And Manual Production.
This Product Has Multiple Models To Choose From, Please Check The Model To Purchase. Chucking Reamer Set Or Single Optional Hss Drill Bridge/Construction Reamer.
Advantages: The Point Is Tapered To Allow Entry Into Overlapping Holes, And The Spiral Groove Can Easily Remove Debris. It Is Made Of High-Quality Hss Material, Which Has High Hardness And Durability.
Brand: Yunnergo | Manufacturer: Yunnergo
See On Amazon #29
10 PCS Reamer Set 1/8-15/32 Inch, HSS H7 Chucking Reamer Set for Lathe Machine, Straight Chucking Machine Cutter Milling Reamer Kit (3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm 11mm 12mm)
Asin: B0B8C66G4C | Model: KPJD01 | PartNumber: KPJD01
Features
- Size: 10pcs, the precision is H7, the diameter of the shank is 3/4/5/6/7/8/9/10/11/12mm (0.12/0.16/0.20/0.24/0.28/0.31/0.35/0.39/0.43/0.47 inch)
- Unique Design: The straight flute design allows the chips generated after cutting to collect in the flute, suitable for most applications in shallow cutting. Universal chamfered round shank design, practical and wide-ranging, clamping and tightening, can be used with a variety of tool shank systems
- High-Quality Material: The product is made of high-quality high-speed steel, which has higher hardness, heat resistance and wear resistance than ordinary materials, effectively prolonging the use time of the milling machine cutter
- High Craftsmanship: The lathe machine reamer is equipped with a sharp cutting edge, which makes the chucking reamer have strong cutting ability, high precision, and clean cutting, making your work easier
- Wide Range of Applications: The chucking machine reamer can be used for hole processing, suitable for reaming stainless steel, aluminum, copper, alloy, plastic and other materials, and can be installed on lathes, drilling machines, screw machines and other equipment to improve the machining accuracy of holes and reduce the surface roughness
- See more on Amazon...
High-Quality Material: The Product Is Made Of High-Quality High-Speed Steel, Which Has Higher Hardness, Heat Resistance And Wear Resistance Than Ordinary Materials, Effectively Prolonging The Use Time Of The Milling Machine Cutter.
Wide Range Of Applications: The Chucking Machine Reamer Can Be Used For Hole Processing, Suitable For Reaming Stainless Steel, Aluminum, Copper, Alloy, Plastic And Other Materials, And Can Be Installed On Lathes, Drilling Machines, Screw Machines And Other Equipment To Improve The Machining Accuracy Of Holes And Reduce The Surface Roughness.
High Craftsmanship: The Lathe Machine Reamer Is Equipped With A Sharp Cutting Edge, Which Makes The Chucking Reamer Have Strong Cutting Ability, High Precision, And Clean Cutting, Making Your Work Easier.
Unique Design: The Straight Flute Design Allows The Chips Generated After Cutting To Collect In The Flute, Suitable For Most Applications In Shallow Cutting. Universal Chamfered Round Shank Design, Practical And Wide-Ranging, Clamping And Tightening, Can Be Used With A Variety Of Tool Shank Systems.
Brand: PNYZIK | Manufacturer: PNYZIK
See On Amazon #30
findmall 10PCS Reamer Set 1/8-15/32 inch Chucking Reamer Set H7 HSS Straight Flute Straight Shank Chucking Machine Cutter Milling Reamer Kit for Lathe Machine
Asin: B09JYS62HT | Model: GYF8-023870 | PartNumber: GYF8-023870 | Ean: 6903036755958
Features
- Specification: Shank Diameter - 3/4/5/6/7/8/9/10/11/12mm (0.12/0.16/0.20/0.24/0.28/0.31/0.35/0.39/0.43/0.47 inch), Accuracy - H7
- Material: This reamer cutter is made of high-quality high speed steel( HSS ), with high hardness, heat resistance and wear resistance
- Straight Flute: Allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts
- Round Shank: Practical chamfered round shank, universal shank type, wide application, clamping and tightening, can be used with a wide variety of tool holding systems
- Application: Chucking reamers( machine reamers) are used on lathes, drill presses and screw machines. Designed for accurate reaming in stainless steel, aluminum, copper, alloy, plastic
- See more on Amazon...
Straight Flute: Allows Chips To Collect In The Flutes When Cutting, Well Suited For Most Applications In Shallow Cuts.
Application: Chucking Reamers( Machine Reamers) Are Used On Lathes, Drill Presses And Screw Machines. Designed For Accurate Reaming In Stainless Steel, Aluminum, Copper, Alloy, Plastic.
Round Shank: Practical Chamfered Round Shank, Universal Shank Type, Wide Application, Clamping And Tightening, Can Be Used With A Wide Variety Of Tool Holding Systems.
Material: This Reamer Cutter Is Made Of High-Quality High Speed Steel( Hss ), With High Hardness, Heat Resistance And Wear Resistance.
Brand: findmall | Manufacturer: findmall
Dimensions: 1.18 x 6.30 x 1.18 Inches
See On Amazon
Looking For Something Else?
Search