Best Plasma Cutting Equipment - Buying Guide
Last Updated: 04/27/2024
Share on
Bestselling Plasma Cutting Equipment on Amazon
- Plasma Cutter, Pilot Arc BTC500DP 7th Generation 50Amps Screen Display Dual Voltage 110/220V Digital...
- YESWELDER Plasma Cutting Machine 65Amp Non-High Frequency Non-Touch Arc Digital Screen Display DC In...
- LOTOS LTP5000D Plasma Cutter, 50 Amp Non-Touch Pilot Arc Plasma Cutter Machine, 5/8 inch Clean Cut 3...
- YESWELDER 55 Amp Plasma Cutter Non-High Frequency, Screen Display Non-Touch Pilot Arc, Digital DC In...
- Plasma Cutter, CUT50 50 Amp 110V/220V Dual Voltage IGBT Cutting Machine
- DURATECH Plasma Cutter, 40Amp Non-Touch Pilot Arc Plasma Cutting Machine with 120V/240V Dual Voltage...
- GZ GUOZHI Plasma Cutter, 50 Amp Air Inverter Plasma Cutter, 110V/220V Dual Voltage Digital Display I...
- AIXZGLOBAL 45 Amp Plasma Cutter, Non-HF Non-Touch Pilot Arc 110/220V Plasma Cutting Machine with Dig...
- Reboot Plasma Cutter, 60Amps Plasma Cutter Machine with 120V 240V Dual Voltage, Digital IGBT Inverte...
- Herocut Plasma Cutter, 35Amp Plasma Cutting Machine, HF 50/60Hz Invert Technology Plasma Cutter, Max...
#1
Plasma Cutter, Pilot Arc BTC500DP 7th Generation 50Amps Screen Display Dual Voltage 110/220V Digital Plasma Cutting Machine (BTC500DP 7GEN 110/220V)
Asin: B0C6G3SQ3W | Model: BTC500DP 7GEN | PartNumber: BTC500DP 7GEN | Ean: 0727431700865 | UPC: 727431700865
Features
- [Pilot Arc Function]: BTC500DP 7th plasma cutter has the pilot arc function. It is a high frequency non-touch arc starting mode. The torch head does not need to touch the metal plate. Added PA adjustable function, extended pilot arc maintenance time, reduce energy consumption in non cutting work, reduce electrode burning, and extend service life.
- [Digital Screen Display]: The screen centrally display parameters such as air pressure, voltage, and current, allowing users to understand the equipment status in real-time and adjust operations in a timely manner, improving operational efficiency. If plasma cutter cannot work, the screen comes with an error code system, making it easy to find out the problems.
- [Sensor of Air Pressure & Air Compressor]: Inside of machine have sensor of air pressure, User can adjust the air pressure through the regulator. The air filter is installed at the rear of the machine with a quick air connector 1/4 NPT, which can be used after opening the box. Users can use it after connecting to the air compressor. Recommended air compressor air pressure value be within the range of 90PSI, 250L/min.
- [Cutting Thickness]: Adopting advanced IGBT inverter technology, 50/60Hz high-frequency pilot arc plasma, dual voltage 110/220V, 60% duty cycle. Current display at 110V is 15-35A, Under 220V current display is 15-50A, the maximum cutting thickness is recommended to be 12mm @ 35A 110V, 50PSI; 16mm@50A 220V, 60 PSI.
- [PT/2T/4T/PA Function]: Post time function, with an adjustment range of 3-15 seconds. Adjust the cooling time of the torch head to extend the service life of consumables. Generally speaking, we recommend a cooling time of 4-8 seconds. 2T/4T automatic cutting release your finger. 2T is semi-automatic cutting control, and 4T is automatic cutting control. PA adjust the time for the pilot arc, longer seconds good at cutting mesh metal, short seconds is good to extend the life of consumables.
- See more on Amazon...
[Sensor Of Air Pressure & Air Compressor]: Inside Of Machine Have Sensor Of Air Pressure, User Can Adjust The Air Pressure Through The Regulator. The Air Filter Is Installed At The Rear Of The Machine With A Quick Air Connector 1/4 Npt, Which Can Be Used After Opening The Box. Users Can Use It After Connecting To The Air Compressor. Recommended Air Compressor Air Pressure Value Be Within The Range Of 90Psi, 250L/Min..
[Pt/2T/4T/Pa Function]: Post Time Function, With An Adjustment Range Of 3-15 Seconds. Adjust The Cooling Time Of The Torch Head To Extend The Service Life Of Consumables. Generally Speaking, We Recommend A Cooling Time Of 4-8 Seconds. 2T/4T Automatic Cutting Release Your Finger. 2T Is Semi-Automatic Cutting Control, And 4T Is Automatic Cutting Control. Pa Adjust The Time For The Pilot Arc, Longer Seconds Good At Cutting Mesh Metal, Short Seconds Is Good To Extend The Life Of Consumables..
[Cutting Thickness]: Adopting Advanced Igbt Inverter Technology, 50/60Hz High-Frequency Pilot Arc Plasma, Dual Voltage 110/220V, 60% Duty Cycle. Current Display At 110V Is 15-35A, Under 220V Current Display Is 15-50A, The Maximum Cutting Thickness Is Recommended To Be 12Mm @ 35A 110V, 50Psi; 16Mm@50A 220V, 60 Psi..
[Digital Screen Display]: The Screen Centrally Display Parameters Such As Air Pressure, Voltage, And Current, Allowing Users To Understand The Equipment Status In Real-Time And Adjust Operations In A Timely Manner, Improving Operational Efficiency. If Plasma Cutter Cannot Work, The Screen Comes With An Error Code System, Making It Easy To Find Out The Problems..
Brand: bestarc | Manufacturer: bestarc
See On Amazon #2
YESWELDER Plasma Cutting Machine 65Amp Non-High Frequency Non-Touch Arc Digital Screen Display DC Inverter 110/220V Dual Voltage Blowback Plasma Cutting Machine CUT-65DS
Asin: B09L3Y3ZLF
Features
- [NON-HF START] The ''blow-back'' start comes without interference and is safe and ideal for general use, friendly to the surrounding electrical machines and human health.
- [Digital Screen Display]: The screen centrally displays parameters such as air pressure, voltage, current, etc., allowing users to understand the status of the equipment in real time, adjusting the operation in a timely manner, and improving the efficiency of the operation. If the plasma cutting machine can not work, there will be an error code system on the screen, it is easy to find the problem.
- [Powerful Cleaning Cutting] CUT-65DS adopts the international leading MCU intelligent digital control technology, all the main components are realized by software. Ideal Clean Cut: 5/16@110V, 5/8@220V Maximum Cut: 1/2@110V, 63/64@220V.
- [PT/2T/4T Function]: Post time function, adjustable from 5-20 seconds. Adjust the cooling time of the welding head to extend the life of consumables. Generally, we recommend a cooling time of 5-8 seconds. 2T/4T auto cut releases your fingers. 2T is a semi-automatic cutting control, 4T is an automatic cutting control.
- [AIR FILTER REGULATOR] There is an air pressure sensor inside the machine, users can adjust the air pressure by the regulator. The air filter is mounted at the rear of the machine, which allows for quick connection and saves installation time and improves efficiency.
- [NON-TOUCH PILOT ARC] The pilot arc IPT40 torch has better cutting performance, which efficiently cuts through rough, painted, and rusty surfaces, while producing minimal slag.
- See more on Amazon...
[Powerful Cleaning Cutting] Cut-65Ds Adopts The International Leading Mcu Intelligent Digital Control Technology, All The Main Components Are Realized By Software. Ideal Clean Cut: 5/16"@110V, 5/8"@220V Maximum Cut: 1/2"@110V, 63/64"@220V..
[Air Filter Regulator] There Is An Air Pressure Sensor Inside The Machine, Users Can Adjust The Air Pressure By The Regulator. The Air Filter Is Mounted At The Rear Of The Machine, Which Allows For Quick Connection And Saves Installation Time And Improves Efficiency..
[Non-Touch Pilot Arc] The Pilot Arc Ipt40 Torch Has Better Cutting Performance, Which Efficiently Cuts Through Rough, Painted, And Rusty Surfaces, While Producing Minimal Slag..
[Pt/2T/4T Function]: Post Time Function, Adjustable From 5-20 Seconds. Adjust The Cooling Time Of The Welding Head To Extend The Life Of Consumables. Generally, We Recommend A Cooling Time Of 5-8 Seconds. 2T/4T Auto Cut Releases Your Fingers. 2T Is A Semi-Automatic Cutting Control, 4T Is An Automatic Cutting Control..
[Digital Screen Display]: The Screen Centrally Displays Parameters Such As Air Pressure, Voltage, Current, Etc., Allowing Users To Understand The Status Of The Equipment In Real Time, Adjusting The Operation In A Timely Manner, And Improving The Efficiency Of The Operation. If The Plasma Cutting Machine Can Not Work, There Will Be An Error Code System On The Screen, It Is Easy To Find The Problem..
Brand: YESWELDER | Manufacturer: YESWELDER
Dimensions: 11.81 x 15.75 x 5.91 inches
See On Amazon #3
LOTOS LTP5000D Plasma Cutter, 50 Amp Non-Touch Pilot Arc Plasma Cutter Machine, 5/8 inch Clean Cut 3/4 inch Severance Cut, Dual Voltage 110/120V or 220/240V, Brown
Asin: B0052OX876 | Model: LTP5000D | PartNumber: LTP5000D | Ean: 0856381005024, 0736211809278, 0852661913713 | UPC: 736211809278, 852661913713, 856381005024
Features
- % : 5/8" Clean Cut. Enhanced with on LOTOS & , delivering a remarkable 25% increase in cutting power output compared to standard 50-amp plasma cutters. The advanced control systems and precision cutting flames of the newly designed torch ensure high-precision cuts with smooth and fine cut lines. Experience faster cutting speeds without compromising accuracy.
- & : Newly designed upgraded torch and consumables guarantee enhanced precision cutting and increased durability, leading to a much longer consumable lifespan. . The compact plasma cutter features a convenient handle for portability, and it utilizes non-hazardous compressed air to effortlessly cut through various materials, including stainless steel, alloy steel, mild steel, copper, and aluminum.
- : The pre-installed NPT 1/4 industry-type D plug and air filter regulator enable seamless connection to your air compressor using the existing stand coupler. Setting up the entire machine is effortless and can be completed within 1 minute. - : Emphasize the significance of pressure adjustment for attaining precise cutting. Ensures a 100% Air Leakage-Free Guarantee.
- : we offer a - and - along with a - covered by our US based lifetime technical support. To avail the warranty, please submit the warranty registration form on our website. - dedicated customer service team is readily available to assist you through phone or email.
- - : Effortlessly cuts through rough, painted, and rusty surfaces while generating minimal slag. The pilot arc technology enables cutting without direct contact between the tip and the metal, resulting in improved cutting quality and extended consumable lifespan.
- & : 10-50A DC output, 5/8 ideal clean cut and 3/4 maximum severance cut under 220/240V. 10-35A DC output, 3/8 ideal clean cut and 1/2 maximum severance cut under 110/120V. SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost.
- : Power supply, Plasma cutting torch, ground clamp, Pre-installed NPT 1/4 industry type D plug and Air filter regulator, consumables, Instruction Manual, etc.
- See more on Amazon...
★ 𝐄𝐚𝐬𝐲 𝐒𝐞𝐭𝐮𝐩 𝐰𝐢𝐭𝐡𝐢𝐧 𝟏 𝐌𝐢𝐧𝐮𝐭𝐞: The Pre-Installed Npt 1/4" Industry-Type D Plug And Air Filter Regulator Enable Seamless Connection To Your Air Compressor Using The Existing Stand Coupler. Setting Up The Entire Machine Is Effortless And Can Be Completed Within 1 Minute. ★ 𝐅𝐫𝐨𝐧𝐭-𝐌𝐨𝐮𝐧𝐭𝐞𝐝 𝐑𝐞𝐠𝐮𝐥𝐚𝐭𝐨𝐫: Emphasize The Significance Of Pressure Adjustment For Attaining Precise Cutting. Ensures A 100% Air Leakage-Free Guarantee..
★ 𝐏𝐚𝐜𝐤𝐚𝐠𝐞 𝐈𝐧𝐜𝐥𝐮𝐝𝐞𝐬: Power Supply, Plasma Cutting Torch, Ground Clamp, Pre-Installed Npt 1/4” Industry Type D Plug And Air Filter Regulator, Consumables, Instruction Manual, Etc..
★ 𝐍𝐨𝐧-𝐓𝐨𝐮𝐜𝐡 𝐏𝐢𝐥𝐨𝐭 𝐀𝐫𝐜 𝐏𝐥𝐚𝐬𝐦𝐚 𝐂𝐮𝐭𝐭𝐞𝐫: Effortlessly Cuts Through Rough, Painted, And Rusty Surfaces While Generating Minimal Slag. The Pilot Arc Technology Enables Cutting Without Direct Contact Between The Tip And The Metal, Resulting In Improved Cutting Quality And Extended Consumable Lifespan..
★ 𝐎𝐮𝐭𝐩𝐮𝐭 & 𝐏𝐞𝐫𝐟𝐨𝐫𝐦𝐚𝐧𝐜𝐞: 10-50A Dc Output, 5/8” Ideal Clean Cut And 3/4” Maximum Severance Cut Under 220/240V. 10-35A Dc Output, 3/8" Ideal Clean Cut And 1/2" Maximum Severance Cut Under 110/120V. Suitable Cutting For Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, Etc. Uses Non-Hazardous Compressed Air To Cut, Safe And At Low Cost..
★ 𝐋𝐢𝐟𝐞𝐭𝐢𝐦𝐞 𝐓𝐞𝐜𝐡𝐧𝐢𝐜𝐚𝐥 𝐒𝐮𝐩𝐩𝐨𝐫𝐭: We Offer A 𝟑𝟎 𝐝𝐚𝐲 𝐦𝐨𝐧𝐞𝐲-𝐛𝐚𝐜𝐤 𝐠𝐮𝐚𝐫𝐚𝐧𝐭𝐞𝐞 And 𝐚 𝟏-𝐲𝐞𝐚𝐫 𝐍𝐞𝐰 𝐑𝐞𝐩𝐥𝐚𝐜𝐞𝐦𝐞𝐧𝐭 𝐰𝐚𝐫𝐫𝐚𝐧𝐭𝐲 Along With A 𝐭𝐨𝐭𝐚𝐥 𝟑-𝐘𝐞𝐚𝐫 𝐥𝐢𝐦𝐢𝐭𝐞𝐝 𝐰𝐚𝐫𝐫𝐚𝐧𝐭𝐲 Covered By Our Us Based Lifetime Technical Support. To Avail The Warranty, Please Submit The Warranty Registration Form On Our Website. 𝐎𝐮𝐫 𝐔𝐒𝐀-𝐛𝐚𝐬𝐞𝐝 Dedicated Customer Service Team Is Readily Available To Assist You Through Phone Or Email..
★ 𝐒𝐚𝐟𝐞 & 𝐚𝐭 𝐋𝐨𝐰 𝐂𝐨𝐬𝐭: Newly Designed Upgraded Torch And Consumables Guarantee Enhanced Precision Cutting And Increased Durability, Leading To A Much Longer Consumable Lifespan. 𝐓𝐡𝐢𝐬 𝐡𝐞𝐥𝐩𝐬 𝐥𝐨𝐰𝐞𝐫 𝐲𝐨𝐮𝐫 𝐨𝐯𝐞𝐫𝐚𝐥𝐥 𝐮𝐬𝐚𝐠𝐞 𝐜𝐨𝐬𝐭𝐬. The Compact Plasma Cutter Features A Convenient Handle For Portability, And It Utilizes Non-Hazardous Compressed Air To Effortlessly Cut Through Various Materials, Including Stainless Steel, Alloy Steel, Mild Steel, Copper, And Aluminum..
First Available: 11/25/2017
Brand: LOTOS | Manufacturer: Lotos Technology
Dimensions: 12.00 x 15.00 x 6.00 Inches | Weight: 19.40 pounds
Warranty: We offer 30 days refund and a 3-YEARS Limited Warranty: Incling 1 Year NEW Replacement Warranty, please submit the registration form on our website.
See On Amazon #4
YESWELDER 55 Amp Plasma Cutter Non-High Frequency, Screen Display Non-Touch Pilot Arc, Digital DC Inverter 110/220V Dual Voltage Cutting Machine CUT-55DS Pro
Asin: B0CQZXGMJS
Features
- [NON-HF START] The ''blow-back'' start comes without interference and is safe and ideal for general use, friendly to the surrounding electrical machines and human health.
- [DIGITAL DISPLAY]: The screen centrally displays parameters such as air pressure, voltage, current, etc., allowing users to understand the status of the equipment in real time, adjusting the operation in a timely manner, and improving the efficiency of the operation. If the plasma cutting machine can not work, there will be an error code system on the screen, it is easy to find the problem.
- [CLEAN CUT] CUT-55DS PRO adopts the international leading MCU intelligent digital control technology, all the main components are realized by software.CLEAN CUT: 1/3''@110V 1/2''@220V // MAX CUT: 1/2''@110V 4/5''@220V.
- [PT/2T/4T FUNCTION]: Post time function, adjustable from 5-20 seconds. Adjust the cooling time of the welding head to extend the life of consumables. Generally, we recommend a cooling time of 5-8 seconds. 2T/4T auto cut releases your fingers. 2T is a semi-automatic cutting control, 4T is an automatic cutting control.
- [AIR FILTER REGULATOR] There is an air pressure sensor inside the machine, users can adjust the air pressure by the regulator. The air filter is mounted at the rear of the machine, which allows for quick connection and saves installation time and improves efficiency.
- [NON-TOUCH PILOT ARC] The pilot arc IPT40 torch has better cutting performance, which efficiently cuts through rough, painted, and rusty surfaces, while producing minimal slag.
- See more on Amazon...
[Clean Cut] Cut-55Ds Pro Adopts The International Leading Mcu Intelligent Digital Control Technology, All The Main Components Are Realized By Software.Clean Cut: 1/3''@110V 1/2''@220V // Max Cut: 1/2''@110V 4/5''@220V..
[Air Filter Regulator] There Is An Air Pressure Sensor Inside The Machine, Users Can Adjust The Air Pressure By The Regulator. The Air Filter Is Mounted At The Rear Of The Machine, Which Allows For Quick Connection And Saves Installation Time And Improves Efficiency..
[Non-Touch Pilot Arc] The Pilot Arc Ipt40 Torch Has Better Cutting Performance, Which Efficiently Cuts Through Rough, Painted, And Rusty Surfaces, While Producing Minimal Slag..
[Pt/2T/4T Function]: Post Time Function, Adjustable From 5-20 Seconds. Adjust The Cooling Time Of The Welding Head To Extend The Life Of Consumables. Generally, We Recommend A Cooling Time Of 5-8 Seconds. 2T/4T Auto Cut Releases Your Fingers. 2T Is A Semi-Automatic Cutting Control, 4T Is An Automatic Cutting Control..
[Digital Display]: The Screen Centrally Displays Parameters Such As Air Pressure, Voltage, Current, Etc., Allowing Users To Understand The Status Of The Equipment In Real Time, Adjusting The Operation In A Timely Manner, And Improving The Efficiency Of The Operation. If The Plasma Cutting Machine Can Not Work, There Will Be An Error Code System On The Screen, It Is Easy To Find The Problem..
Brand: YESWELDER | Manufacturer: YESWELDER
See On Amazon #5
Plasma Cutter, CUT50 50 Amp 110V/220V Dual Voltage IGBT Cutting Machine
Asin: B07GB3T4KG | Model: JH-1(2) | PartNumber: JH-1(2) | Ean: 0791391489689, 6496605762995 | UPC: 791391489689
Features
- This Plasma Cutter Is Made Of High Quality Components, By Adopting The Most Advanced Inverter Technical Of Switch Power, As Well As The Product Life And Work Efficiency Are Increased By 30% Than Ordinary Machines
- The Cutting Effect Is Also Perfect, Smooth Cutting Surface, No Need To Polish,20psi Cut Better
- This Plasma Cutter With LCD Digital Display And Equipped With A Portable Handle It Is Very Convenient To Operate And Carry
- This Plasma Cutter Is Widely Used For Cutting Stainless Steel, Alloy Steel, Mild Steel, Copper And Other Color Metal Materials,The Cutting Thickness Is 1-20MM
- Our Plasma Cutter Can Automatically Adapt To Switch Input Power Of 90V-260V, Plug And Play In Different Environments, No External Conversion Plug Required,Has Passed 12 High-Temperature Tests, Such As High Temperature, Cold, Dust, Bumps, Throwing,Noise And So On.
- See more on Amazon...
●This Plasma Cutter With Lcd Digital Display And Equipped With A Portable Handle，It Is Very Convenient To Operate And Carry.
●Our Plasma Cutter Can Automatically Adapt To Switch Input Power Of 90V-260V, Plug And Play In Different Environments, No External Conversion Plug Required,Has Passed 12 High-Temperature Tests, Such As High Temperature, Cold, Dust, Bumps, Throwing,Noise And So On..
●This Plasma Cutter Is Widely Used For Cutting Stainless Steel, Alloy Steel, Mild Steel, Copper And Other Color Metal Materials,The Cutting Thickness Is 1-20Mm.
●The Cutting Effect Is Also Perfect, Smooth Cutting Surface, No Need To Polish,20Psi Cut Better.
Brand: S7 | Manufacturer: win-win
Dimensions: 10.00 x 17.00 x 14.00 Inches
See On Amazon #6
DURATECH Plasma Cutter, 40Amp Non-Touch Pilot Arc Plasma Cutting Machine with 120V/240V Dual Voltage IGBT Inverter, Digital Display and 50A to 15A Plug Adapter, Plasma Cutting Equipment 1/2" Clean Cut
Asin: B0B878P5FH | Ean: 0820909779841 | UPC: 820909779841
Features
- NON-TOUCH PLASMA CUTTER This plasma cutter can effectively cut rough, painted, rusted metal with less slag. Pilot arc technology allows you to cut without touching the tip to the metal for better cutting quality and a longer consumable life
- POWERFUL CLEAN CUT Automatic dual voltage 120V and 240V for the wide use of light-duty work and heavy-duty construction site work. 1/2 clean cut thickness and 11/16 maximum severance cut thickness under 240V
- LIGHTWEIGHT AND PORTABLE This compact plasma cutter is 14-3/8 L * 8-5/8 W * 6 H and weighs 14.4 lbs, making it easy to use in different environments. Lightweight for both men and women. Beautiful design, ideal gifts!
- WIDE CUTTING ABILITY This 40 amp professional plasma cutter is suitable for cutting aluminum, magnesium alloys, brass, stainless steel, cast iron, steel, copper, copper, titanium, and other metal materials. It is very friendly to both DIY, beginner cutter, and professional workers
- ADDED SAFETY This non-touch pilot arc plasma cutter is certificated by CSA and the power cord is UL listed, automatic compensation for voltage fluctuation, over-current protection, overload protection, and temperature control. Please try with confidence. Any problems, please feel free to get in touch with us
- See more on Amazon...
【Lightweight And Portable】This Compact Plasma Cutter Is 14-3/8" L * 8-5/8" W * 6" H And Weighs 14.4 Lbs, Making It Easy To Use In Different Environments. Lightweight For Both Men And Women. Beautiful Design, Ideal Gifts!.
【Added Safety】This Non-Touch Pilot Arc Plasma Cutter Is Certificated By Csa And The Power Cord Is Ul Listed, Automatic Compensation For Voltage Fluctuation, Over-Current Protection, Overload Protection, And Temperature Control. Please Try With Confidence. Any Problems, Please Feel Free To Get In Touch With Us.
【Wide Cutting Ability】This 40 Amp Professional Plasma Cutter Is Suitable For Cutting Aluminum, Magnesium Alloys, Brass, Stainless Steel, Cast Iron, Steel, Copper, Copper, Titanium, And Other Metal Materials. It Is Very Friendly To Both Diy, Beginner Cutter, And Professional Workers.
【Powerful Clean Cut】Automatic Dual Voltage 120V And 240V For The Wide Use Of Light-Duty Work And Heavy-Duty Construction Site Work. 1/2" Clean Cut Thickness And 11/16" Maximum Severance Cut Thickness Under 240V.
Brand: DURATECH | Manufacturer: Hangzhou Great Star Industrial Co,.LTD
Dimensions: 6.00 x 14.38 x 8.63 Inches | Weight: 14.40 pounds
Warranty: 2 year warranty
See On Amazon #7
GZ GUOZHI Plasma Cutter, 50 Amp Air Inverter Plasma Cutter, 110V/220V Dual Voltage Digital Display IGBT Inverter Plasma Cutting Machine with 2T/4T/TEST Function
Asin: B0CJTRNYNR | Model: CUT-50 | PartNumber: CUT-50
Features
- GZ GUOZHI CUT 50 It is the perfect gift for Father, Husband, Friends, DIYer.
- Advanced Technology : 20A-50A current adjustment,90V-260V wide-voltage design,unafraid of the voltage fluctuation, 110V/220V dual-voltage automatic conversion. Maximum Cutting Thickness is 1/2 , ideal clean cutting thickness is 2/5 . High cutting speed, smooth cutting section and no polish demands.
- Set Up Within 1 Minute : 1/4 inch industrial D-type plug, can easily and quickly connect to the air compressor, the users do not need to install the air pressure regulator. The whole machine can be setup quickly within 1 min.
- Safety Guarantee : This Plasma Cutter Machine with over-heating and over-current protection functions, with excellent and reliable quality, use more safety. 2T/4T/TEST function,easy to operation.
- Portable & Lightweight : We have made a major upgrade to the size and weight of the machine. Compared to other similar products, our CUT-50 is lightweight and small, making it easy to use even in tight spaces.
- Wide Applications : GZ GUOZHI 50 Amp plasma Cutter able to cut stainless steel, alloy steel, mild steel,copper aluminum and other metal materials. This cutter can work normally at minus 20 degree.
- After-sales Service : We offer one year warranty and life-time technical support for every customer. If you have any questions or concerns while using, please feel free to contact us via message or via email.GZ GUOZHI customer service centre will reply within 24hrs.
- See more on Amazon...
【Set Up Within 1 Minute】: 1/4 Inch Industrial D-Type Plug, Can Easily And Quickly Connect To The Air Compressor, The Users Do Not Need To Install The Air Pressure Regulator. The Whole Machine Can Be Setup Quickly Within 1 Min..
【After-Sales Service】: We Offer One Year Warranty And Life-Time Technical Support For Every Customer. If You Have Any Questions Or Concerns While Using, Please Feel Free To Contact Us Via Message Or Via Email.Gz Guozhi Customer Service Centre Will Reply Within 24Hrs..
【Portable & Lightweight】: We Have Made A Major Upgrade To The Size And Weight Of The Machine. Compared To Other Similar Products, Our Cut-50 Is Lightweight And Small, Making It Easy To Use Even In Tight Spaces..
【Wide Applications】: Gz Guozhi 50 Amp Plasma Cutter Able To Cut Stainless Steel, Alloy Steel, Mild Steel,Copper，Aluminum And Other Metal Materials. This Cutter Can Work Normally At Minus 20 Degree..
【Safety Guarantee】: This Plasma Cutter Machine With Over-Heating And Over-Current Protection Functions, With Excellent And Reliable Quality, Use More Safety. 2T/4T/Test Function,Easy To Operation..
【Advanced Technology 】: 20A-50A Current Adjustment,90V-260V Wide-Voltage Design,Unafraid Of The Voltage Fluctuation, 110V/220V Dual-Voltage Automatic Conversion. Maximum Cutting Thickness Is 1/2 ", Ideal Clean Cutting Thickness Is 2/5 ". High Cutting Speed, Smooth Cutting Section And No Polish Demands..
Brand: GZ GUOZHI | Manufacturer: GZ GUOZHI
See On Amazon #8
AIXZGLOBAL 45 Amp Plasma Cutter, Non-HF Non-Touch Pilot Arc 110/220V Plasma Cutting Machine with Digital Display IGBT Inverter 16mm Max Cut
Asin: B0CVXF45N9 | Model: AIC45 | PartNumber: AIC45
Features
- NON-TOUCH PILOT ARC : The AIXZGLOBAL plasma cutter features a low-frequency non-touch arc starting mode. The torch head effectively cuts rough, rusty surfaces without touching the metal and produces minimal slag, improving cut quality and extending consumable life.
- LOW-FREQUENCY START : AIC45 plasma cutter machine is equipped with an XT45 low-frequency cutting gun, which makes it easier to start the arc, has a higher cutting success rate, has no interference with the power supply and is harmless to human health.
- CUTTING TECHNOLOGY : The plasma cutter ideals cut cleanliness of 10mm, maximum 16mm severance thickness, cut stainless steel, carbon steel, aluminum, copper, titanium and other metal materials with fast cutting speeds and smooth cutting surfaces.
- IGBT & 2T/4T : This dual voltage plasma cutting equipment adopts stable and mature IGBT inverter technology. DC output current 15-45A, 50/60HZ, duty cycle 60%, LCD digital display can easily control the voltage and current, and you can select the 2T/4T mode through the display to meet your needs and choices.
- LIGHTWEUGHT & APPLICABLE : Our upgraded plasma cutter is compact, shaped and lightweight with an easy carry handle. Weight 11.2LBS. Dimensions: 28x12x25cm It is suitable for home DIY hobby, repair work, metal processing, site work, etc.
- BUY WITH CONFIDENCE : 1 X Power Cable, 1 X Plasma Cutting Torch(3M), 1 X Ground Clamp(1.5M), 1 X Air Hose(3M), 1 X Air Filter Regulator, 1 X Manual. AIXZGLOBAL provides 30-Day Money Back Guarantee and 2-Years Warranty, If there are any questions, please feel free to contact us. Notice: Our products have been professionally tested at the factory.
- See more on Amazon...
✅【Cutting Technology】: The Plasma Cutter Ideals Cut Cleanliness Of 10Mm, Maximum 16Mm Severance Thickness, Cut Stainless Steel, Carbon Steel, Aluminum, Copper, Titanium And Other Metal Materials With Fast Cutting Speeds And Smooth Cutting Surfaces..
✅【Lightweught & Applicable】: Our Upgraded Plasma Cutter Is Compact, Shaped And Lightweight With An Easy Carry Handle. Weight 11.2Lbs. Dimensions: 28X12x25cm It Is Suitable For Home Diy Hobby, Repair Work, Metal Processing, Site Work, Etc..
✅【Buy With Confidence】: 1 X Power Cable, 1 X Plasma Cutting Torch(3M), 1 X Ground Clamp(1.5M), 1 X Air Hose(3M), 1 X Air Filter Regulator, 1 X Manual. Aixzglobal Provides 30-Day Money Back Guarantee And 2-Years Warranty, If There Are Any Questions, Please Feel Free To Contact Us. Notice: Our Products Have Been Professionally Tested At The Factory..
✅【Igbt & 2T/4T】: This Dual Voltage Plasma Cutting Equipment Adopts Stable And Mature Igbt Inverter Technology. Dc Output Current 15-45A, 50/60Hz, Duty Cycle 60%, Lcd Digital Display Can Easily Control The Voltage And Current, And You Can Select The 2T/4T Mode Through The Display To Meet Your Needs And Choices..
✅【Low-Frequency Start】: Aic45 Plasma Cutter Machine Is Equipped With An Xt45 Low-Frequency Cutting Gun, Which Makes It Easier To Start The Arc, Has A Higher Cutting Success Rate, Has No Interference With The Power Supply And Is Harmless To Human Health..
Brand: AIXZGLOBAL | Manufacturer: AIXZGLOBAL
Weight: 11.20 Pounds
Warranty: 2 years
See On Amazon #9
Reboot Plasma Cutter, 60Amps Plasma Cutter Machine with 120V 240V Dual Voltage, Digital IGBT Inverter Power Plasma cutters 1/2 Inch Clean Cut New Upgrade RBC6000D
Asin: B0C3H6CPZP | Model: RBC6000D | PartNumber: RBC6000D
Features
- POWERFUL PERFORMANCE With advanced IGBT inverter technology, the maximum severance cut can reach up to 3/4" (20 mm), 1/2" (12mm) ideal clean cut, 60% duty cycle. The recommended current is 60A, the recommended psi is between 30-50psi (0.21-0.35Mpa) when connecting 120V, the recommended psi is between 30-70psi (0.21-0.49Mpa) when connecting 220V.
- DUAL VOLTAGE Automatic dual-voltage 120/240V. It allows the machine to run directly on 240 V 50/60 Hz power or on 120 V 50/60 Hz with the use of a power adapter, without removing the covers to relink the power source. Suitable home DIY and industrial projects.
- WIDE CUTTING ABILITY This 60 amp professional plasma cutter is suitable for cutting aluminum, magnesium alloys, brass, stainless steel, cast iron, steel, copper, copper, titanium, and other metal materials. It is very friendly to both DIY, beginner cutter, and professional workers.
- PORTABLE & LIGHTWEIGHT Portable in the shop or at the job site, this plasma cutter machine only weighs 10.6 pounds, easy to carry. Package weighs 18.26 pounds. It allows the end user to easily move from location to location.
- STABLE and DURABLE RBC6000D provides maximum customer convenience by automatically controlling the arc when cutting expanded metal or multiple pieces of metal. When cutting expanded metal, the ignition arc quickly switches as needed and provides maximum power for cutting thicker metal - all automatically No manual re-triggering is required, reducing user hand fatigue.
- WARRANTY from Reboot We provide 30-Day Money Back Guarantee and 1-Year Warranty for you. 7 day per week support in USA.
- See more on Amazon...
【Wide Cutting Ability】This 60 Amp Professional Plasma Cutter Is Suitable For Cutting Aluminum, Magnesium Alloys, Brass, Stainless Steel, Cast Iron, Steel, Copper, Copper, Titanium, And Other Metal Materials. It Is Very Friendly To Both Diy, Beginner Cutter, And Professional Workers..
【Stable And Durable】Rbc6000d Provides Maximum Customer Convenience By Automatically Controlling The Arc When Cutting Expanded Metal Or Multiple Pieces Of Metal. When Cutting Expanded Metal, The Ignition Arc Quickly Switches As Needed And Provides Maximum Power For Cutting Thicker Metal - All Automatically No Manual Re-Triggering Is Required, Reducing User Hand Fatigue..
【Warranty From Reboot】We Provide 30-Day Money Back Guarantee And 1-Year Warranty For You. 7 Day Per Week Support In Usa..
【Portable & Lightweight】Portable In The Shop Or At The Job Site, This Plasma Cutter Machine Only Weighs 10.6 Pounds, Easy To Carry. Package Weighs 18.26 Pounds. It Allows The End User To Easily Move From Location To Location..
【Dual Voltage】 Automatic Dual-Voltage 120/240V. It Allows The Machine To Run Directly On 240 V 50/60 Hz Power Or On 120 V 50/60 Hz With The Use Of A Power Adapter, Without Removing The Covers To Relink The Power Source. Suitable Home Diy And Industrial Projects..
Brand: Reboot | Manufacturer: Reboot
Dimensions: 9.25 x 13.00 x 5.00 Inches
See On Amazon #10
Herocut Plasma Cutter, 35Amp Plasma Cutting Machine, HF 50/60Hz Invert Technology Plasma Cutter, Max Cutting Thickness 8mm (CUT35 110V)
Asin: B08PQKGQ6D | Ean: 0706189866801 | UPC: 706189866801
Features
- Plasma Cutter, 110V 35A cutting machine with IGBT inverter technology, It is long life and efficient higher than mosfet machine.
- Very good to cut car flame, Clean cutting thickness 6mm Max cutting thickness 10mm,Machine only work in 110V not 220V, Please confirm the voltage before buying this machine. Machine maybe explode if connect it to 220V, Be careful~!
- This plasma cutter with current display and air gauge fixed on panel, Easy read air pressure and current, these functions are great to help the user cut any metal.
- The plasma cutter easy to cut stainless steel, alloy steel, mild steel, Copper,aluminum etc. witgh Quality cutting torch PT31 plasma torch, Max cutting thickness is 8mm at 35Amps 110V 50PSI
- Machine come with 110V power plug.1 x 4 meters Cutting torch, 1 x2 meters Earth clamp, 1 x 2 meters Air Hose, 1 x Air filter,2 x Tip (Nozzle), 2 x Electrode, 2 hose clamp,1 x Manual
- See more on Amazon...
✤ This Plasma Cutter With Current Display And Air Gauge Fixed On Panel, Easy Read Air Pressure And Current, These Functions Are Great To Help The User Cut Any Metal..
✤ Machine Come With 110V Power Plug.1 X 4 Meters Cutting Torch, 1 X2 Meters Earth Clamp, 1 X 2 Meters Air Hose, 1 X Air Filter,2 X Tip (Nozzle), 2 X Electrode, 2×Hose Clamp,1 X Manual.
✤ The Plasma Cutter Easy To Cut Stainless Steel, Alloy Steel, Mild Steel, Copper,Aluminum Etc. Witgh Quality Cutting Torch Pt31 Plasma Torch, Max Cutting Thickness Is 8Mm At 35Amps 110V 50Psi.
✤ Very Good To Cut Car Flame, Clean Cutting Thickness 6Mm Max Cutting Thickness 10Mm,Machine Only Work In 110V Not 220V, Please Confirm The Voltage Before Buying This Machine. Machine Maybe Explode If Connect It To 220V, Be Careful~!.
Brand: HEROCUT | Manufacturer: HEROCUT
See On Amazon #11
ARCCAPTAIN Plasma Cutter, [Large LED Display] 50Amps Cutter Machine with 110/220V Dual Voltage DC Inverter IGBT 1/2 Inch Clean Cut Post Flow and 2T/4T, for Beginners DIY
Asin: B0B5N7K2DJ
Features
- EASY TO CUT, POWERFUL PERFORMANCE Automatic dual-voltage 110/220V. With advanced IGBT inverter technology, the maximum severance cut can reach up to 3/4" (20 mm), 1/2" (10mm) ideal clean cut, 60% duty cycle. Suitable for alloy steel, stainless steel, mild steel, copper, aluminum, etc. The recommended current is 50A, the recommended psi is between 20-40psi when connecting 110V, the recommended psi is between 30-60psi when connecting 220V.
- EASY TO ASSEMBLE With a plug-in air filter connector and built-in regulator, help you to get rid of tedious installation anymore. Only takes 30 seconds and you can start cutting.
- PORTABLE & LIGHTWEIGHT This plasma cutter machine only weighs 13 pounds, easy to carry. It's also tiny and light enough to move with strap in any workplace(strap included).
- ADVANCED DIGITAL TECHNOLOGY You can adjust the post-flow time from 5-15 seconds to have a clean cut. Also could select 2T/4T to have a comfortable working experience. The exclusive Large LED design provides you with an accurate data display and helps you read all data easier and more clearly without taking off your helmet.
- SAFETY & DURABLE ARCCAPTAIN welder machine have passed a variety of professional tests and certifications including T V and ANSI standards before leaving our factory. We provide 30-Day Money Back Guarantee and 2-Years Warranty for you.
- See more on Amazon...
【Portable & Lightweight】This Plasma Cutter Machine Only Weighs 13 Pounds, Easy To Carry. It's Also Tiny And Light Enough To Move With Strap In Any Workplace(Strap Included)..
【Safety & Durable】 Arccaptain Welder Machine Have Passed A Variety Of Professional Tests And Certifications Including Tüv And Ansi Standards Before Leaving Our Factory. We Provide 30-Day Money Back Guarantee And 2-Years Warranty For You..
【Advanced Digital Technology】You Can Adjust The Post-Flow Time From 5-15 Seconds To Have A Clean Cut. Also Could Select 2T/4T To Have A Comfortable Working Experience. The Exclusive Large Led Design Provides You With An Accurate Data Display And Helps You Read All Data Easier And More Clearly Without Taking Off Your Helmet..
【Easy To Assemble】With A Plug-In Air Filter Connector And Built-In Regulator, Help You To Get Rid Of Tedious Installation Anymore. Only Takes 30 Seconds And You Can Start Cutting..
Brand: ARCCAPTAIN | Manufacturer: ARCCAPTAIN
Dimensions: 8.00 x 13.00 x 6.00 Inches | Weight: 13.00 pounds
See On Amazon #12
bestarc Plasma Cutter, BTC800DP 9th Generation 80Amps Pilot Arc Plasma Cutter Machine, Digital Screen Display Dual Voltage 110/220V Plasma Cutting Machine (BTC800DP 9GEN 110/220V)
Asin: B0CXXLTXVB | Model: BTC800DP 9GEN | PartNumber: BTC800DP 9GEN | Ean: 0727431700742 | UPC: 727431700742
Features
- [Pilot Arc Function]: BTC800DP 9th bestarc plasma cutter has the pilot arc function. It is a high frequency non-touch arc starting mode. The torch head does not need to touch the metal plate. The cutting methods of mesh and plate are added to solve the problem that cutting mesh is easy to break arc.
- [Digital Screen Display]: The screen of the plasma cutter machine displays the parameters centrally such as air pressure, voltage, and current, allowing users to understand the equipment status in real-time and adjust operations in a timely manner, improving operational efficiency. If plasma cutter cannot work, the screen comes with an error code system, making it easy to find out the problems.
- [Sensor of Air Pressure & Air Compressor]: Inside of plasma cutting machine have sensor of air pressure, User can adjust the air pressure through the regulator. The air filter is installed at the rear of the machine with a quick air connector 1/4 NPT, which can be used after opening the box. Users can use it after connecting to the air compressor. Recommended air compressor air pressure value be within the range of 90PSI, 250L/min.
- [Cutting Thickness]: Pilot arc plasma cutter adopting advanced IGBT inverter technology, 50/60Hz high-frequency pilot arc, dual voltage 110/220V, 60% duty cycle. Current display at 110V is 15-40A, Under 220V current display is 15-80A, the maximum cutting thickness is recommended to be 14mm @ 40A 110V, 50PSI; 25mm@80A 220V, 60 PSI.
- [PT/2T/4T/PA Function]: Post time function, with an adjustment range of 3-15 seconds. Adjust the cooling time of the torch head to extend the service life of consumables. Generally speaking, we recommend a cooling time of 4-8 seconds. 2T/4T automatic cutting release your finger. 2T is semi-automatic cutting control, and 4T is automatic cutting control. PA adjust the time for the pilot arc, longer seconds good at cutting mesh metal, short seconds is good to extend the life of consumables.
- See more on Amazon...
[Sensor Of Air Pressure & Air Compressor]: Inside Of Plasma Cutting Machine Have Sensor Of Air Pressure, User Can Adjust The Air Pressure Through The Regulator. The Air Filter Is Installed At The Rear Of The Machine With A Quick Air Connector 1/4 Npt, Which Can Be Used After Opening The Box. Users Can Use It After Connecting To The Air Compressor. Recommended Air Compressor Air Pressure Value Be Within The Range Of 90Psi, 250L/Min..
[Pt/2T/4T/Pa Function]: Post Time Function, With An Adjustment Range Of 3-15 Seconds. Adjust The Cooling Time Of The Torch Head To Extend The Service Life Of Consumables. Generally Speaking, We Recommend A Cooling Time Of 4-8 Seconds. 2T/4T Automatic Cutting Release Your Finger. 2T Is Semi-Automatic Cutting Control, And 4T Is Automatic Cutting Control. Pa Adjust The Time For The Pilot Arc, Longer Seconds Good At Cutting Mesh Metal, Short Seconds Is Good To Extend The Life Of Consumables..
[Cutting Thickness]: Pilot Arc Plasma Cutter Adopting Advanced Igbt Inverter Technology, 50/60Hz High-Frequency Pilot Arc, Dual Voltage 110/220V, 60% Duty Cycle. Current Display At 110V Is 15-40A, Under 220V Current Display Is 15-80A, The Maximum Cutting Thickness Is Recommended To Be 14Mm @ 40A 110V, 50Psi; 25Mm@80A 220V, 60 Psi..
[Digital Screen Display]: The Screen Of The Plasma Cutter Machine Displays The Parameters Centrally Such As Air Pressure, Voltage, And Current, Allowing Users To Understand The Equipment Status In Real-Time And Adjust Operations In A Timely Manner, Improving Operational Efficiency. If Plasma Cutter Cannot Work, The Screen Comes With An Error Code System, Making It Easy To Find Out The Problems..
Brand: bestarc | Manufacturer: bestarc
Amazon Price: $549.99 | as of 04/27/2024
(3:05pm pst) *DETAILSAvailability: Temporarily out of stock. We are working hard to be back in stock. Place your order and we’ll email you when we have an estimated delivery date. You won’t be charged until the item ships.
See On Amazon #13
TOOLIOM 50A Non-Touch Pilot ARC Air Plasma Cutter Dual Voltage 110V/220V IGBT Inverter Metal Cutting Machine 1/2" Clean Cut
Asin: B08FYCYJHQ | Model: TL-50C | PartNumber: TL-50C | Ean: 0630128776626 | UPC: 630128776626
Features
- Non-touch Polit ARC: Can effectively cut rough, painted and rusty surfaces, and generates the least slag. The torch head does not need to touch the metal plate, then it will start arc. Better cutting quality and longer consumable life.
- Powerful Cutting Effect: Up to 50A output, 60% Duty Cycle, maximum 1/2 clean cut.
- Multi-applications: Suitable for cutting stainless steel, alloy steel, low carbon steel, copper and other metal materials.
- Safety Protection: Certificated by ETL, built in over current protection, over load protection, temperature control.
- Portable: Auto-voltage adapts to 110 V - 220 V input power with adapter. Lightweight 13lb, can be carry and storage anywhere you need.
- See more on Amazon...
Multi-Applications: Suitable For Cutting Stainless Steel, Alloy Steel, Low Carbon Steel, Copper And Other Metal Materials..
Portable: Auto-Voltage Adapts To 110 V - 220 V Input Power With Adapter. Lightweight 13Lb, Can Be Carry And Storage Anywhere You Need..
Safety Protection: Certificated By Etl, Built In Over Current Protection, Over Load Protection, Temperature Control..
Powerful Cutting Effect: Up To 50A Output, 60% Duty Cycle, Maximum 1/2" Clean Cut..
Brand: TOOLIOM | Manufacturer: TOOLIOM
See On Amazon #14
YESWELDER CUT-55DS 55Amp Non-Touch Pilot Arc Air Power Plasma Cutter 1/2 Inch Clean Cut, Digital 110/220V Dual Voltage IGBT Inverter Plasma Cutting Machine with ETL Approved
Asin: B083GPXF8Y | Model: CUT-55DS | PartNumber: CUT-55DS
Features
- [NON-TOUCH PILOT ARC] Efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag. Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life.
- [BUILT-IN POST FLOW] When you stop cutting, the air runs on for a minute to cool the consumable of the plasma cutter torch. This will extend consumable life.
- [POWERFUL CUTTING ABILITY] 20-55 output, ideal clean cut: 3/10''@110V,1/2''@220V, max cut: 3/5''@110V,4/5''@220V. Uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.
- [LIGHTWEIGHT AND PORTABLE] Allows for connection to 110 or 220 volt receptacles without tools, Portable in the shop or at the job site at 11.55lb, the shoulder strap allows the end user to easily move from location to location.
- [ADDED SAFETY] Certificated by ETL, Automatic compensation for voltage fluctuation, over current protection, over load protection, temperature control. Note:Due to the inner structure, the pressure gauge may only read about 30psi, which is the normal phenomenom and it do not affect the whole operation.
- See more on Amazon...
[Powerful Cutting Ability] 20-55 Output, Ideal Clean Cut: 3/10''@110V,1/2''@220V, Max Cut: 3/5''@110V,4/5''@220V. Uses Non-Hazardous Compressed Air To Cut Stainless Steel, Alloy Steel, Mild Steel, Copper, And Aluminum..
[Added Safety] Certificated By Etl, Automatic Compensation For Voltage Fluctuation, Over Current Protection, Over Load Protection, Temperature Control. Note:Due To The Inner Structure, The Pressure Gauge May Only Read About 30Psi, Which Is The Normal Phenomenom And It Do Not Affect The Whole Operation..
[Lightweight And Portable] Allows For Connection To 110 Or 220 Volt Receptacles Without Tools, Portable In The Shop Or At The Job Site—At 11.55Lb, The Shoulder Strap Allows The End User To Easily Move From Location To Location..
[Built-In Post Flow] When You Stop Cutting, The Air Runs On For A Minute To Cool The Consumable Of The Plasma Cutter Torch. This Will Extend Consumable Life..
Brand: YESWELDER | Manufacturer: SHENZHEN HAIBAO PLASMA EQUIPMENT CO.,LTD
See On Amazon #15
Hobart 500564 Airforce 12ci Plasma Cutter with Built-In Air Compressor 120V , Brown
Asin: B014V4LJWS | Model: 500564 | PartNumber: 500564 | Ean: 0715959613620 | UPC: 715959613620
Features
- Built in Air Compressor
- Cuts faster than oxy fuel
- Smaller heat-affected zone for less warping
- No gas pressure settings for flame tuning needed
- More precise cut, thinner kerf, less slag to clean up
- See more on Amazon...
Smaller Heat-Affected Zone For Less Warping.
More Precise Cut, Thinner Kerf, Less Slag To Clean Up.
No Gas Pressure Settings For Flame Tuning Needed.
Cuts Faster Than Oxy Fuel.
Brand: Hobart | Manufacturer: Hobart
Dimensions: 11.25 x 16.50 x 18.50 Inches | Weight: 31.00 pounds
Warranty: 5-3-1 Warranty
See On Amazon #16
Plasma Cutter, TIG Welder With PULSE, Stick Welder Machine CT418 Plasma Cutter Welder Combo 180A TIG/ARC Welding 40A Air Plasma Cutting Equipment Dual Voltage 110V 220V 2/5" Clean Cut HF TIG Welder
Asin: B0CBB2RCPF | Model: CT-418 | PartNumber: CT-418 | Ean: 6971115504100
Features
- Advantage: We have updated our CT418 machine. Under the condition that the basic functions remain unchanged, our machine has increased the PULSE function to make the welding effect even better. And the machine adopts a brand-new digital panel, which is easier to set up and operate. It is still an automatic dual voltage dual frequency (110/220V, 50/60HZ).
- 10-40Amp Plasma Cutter: 40amp plasma cutter current output @220V. Compact plasma cutter has a handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum; can cut all types of metal up to 1/3.
- HF TIG Welder & PULSE TIG Welder: 10-180A Pulse TIG Welder Electric Current Output @ 220V. Quality TIG welding on stainless steel, nickel alloys, copper, brass and bronze etc. The newly added PULSE function makes the welding shape more beautiful and improvers tungsten life.
- Stick/ARC Welder: 10-160amp output current @220V. Easy arc start, stable welding arc; Deep weld pool and beautiful welding shape.
- What You Get: Our worry-free 12-month warranty, and friendly customer service. The CT-418 machine comes with a PT-31 cutting torch, TIG-17FV torch for tig welding. You also get stick holder, earth clamp, power cable, air hose, and torch consumables.
- See more on Amazon...
✅ Hf Tig Welder & Pulse Tig Welder: 10-180A Pulse Tig Welder Electric Current Output @ 220V. Quality Tig Welding On Stainless Steel, Nickel Alloys, Copper, Brass And Bronze Etc. The Newly Added Pulse Function Makes The Welding Shape More Beautiful And Improvers Tungsten Life..
✅ What You Get: Our Worry-Free 12-Month Warranty, And Friendly Customer Service. The Ct-418 Machine Comes With A Pt-31 Cutting Torch, Tig-17Fv Torch For Tig Welding. You Also Get Stick Holder, Earth Clamp, Power Cable, Air Hose, And Torch Consumables..
✅ Stick/Arc Welder: 10-160Amp Output Current @220V. Easy Arc Start, Stable Welding Arc; Deep Weld Pool And Beautiful Welding Shape..
✅ 10-40Amp Plasma Cutter: 40Amp Plasma Cutter Current Output @220V. Compact Plasma Cutter Has A Handle For Portability And Uses Non-Hazardous Compressed Air To Cut Stainless Steel, Alloy Steel, Mild Steel, Copper, And Aluminum; Can Cut All Types Of Metal Up To 1/3"..
Brand: PLASMARGON | Manufacturer: PLASMARGON
See On Amazon #17
CUT50A Inverter Non touch HF Plasma Cutter 110 Voltage 45Amp 1/4 inch Clean Cut 1/2 inch Limit Cut SG55 torch high duty cycle light and small
Asin: B0CYL9L4K2 | Model: W20000-5367-1117032472 | PartNumber: W20000-5367-1117032472
Features
- Plasma Cutter, Input voltage is 110/220V, Adopt Latest IGBT inverter technology, Easy cut stainless steel, Alloy Steel, Mild Steel, Thin Copper, Aluminum, It is High Frequency Arc Starting. we offer 1 year warranty for this machine.
- Cutting current 40Amps DC output, 8mm clean cut, 12mm max severance cutting thickness under 220V 65PSI, This machine very good for home use to cut thin metal, car steel, Come with PT31, work with standard parts, the buyer easy to find the consumables from market.
- Input voltage is 110/220V 50/60Hz,It is dual voltage, Automatic indicate the voltage no need to switch by handle from 110v to 220v, Better use 45Amps power breaker for this machine. Machine come with NPT 1/4 air connector, very quick to connect machine to air compressor.
- Under 110V 30Amps output, Duty cycle 60% in 30Amps, 100% in 25Amps,Under 220V 40Amps output, Duty cycle 60% in 40Amps,100% in 30Amps, Air pressure range from 40-70PSI, Maybe the cutting arc not stable if the air less or over the range.
- There are 110v and 220v LED indicator on penal, Very easy to know what kind of voltage come into machine. We supply high quality machine, very lightweight but powerful, Very easy to operate and carry, We also supply quality accessories and torch parts.
- See more on Amazon...
✪ Input Voltage Is 110/220V 50/60Hz,It Is Dual Voltage, Automatic Indicate The Voltage No Need To Switch By Handle From 110V To 220V, Better Use 45Amps Power Breaker For This Machine. Machine Come With Npt 1/4’’ Air Connector, Very Quick To Connect Machine To Air Compressor..
✪ There Are 110V And 220V Led Indicator On Penal, Very Easy To Know What Kind Of Voltage Come Into Machine. We Supply High Quality Machine, Very Lightweight But Powerful, Very Easy To Operate And Carry, We Also Supply Quality Accessories And Torch Parts..
✪ Under 110V 30Amps Output, Duty Cycle 60% In 30Amps, 100% In 25Amps,Under 220V 40Amps Output, Duty Cycle 60% In 40Amps,100% In 30Amps, Air Pressure Range From 40-70Psi, Maybe The Cutting Arc Not Stable If The Air Less Or Over The Range..
✪ Cutting Current 40Amps Dc Output, 8Mm Clean Cut, 12Mm Max Severance Cutting Thickness Under 220V 65Psi, This Machine Very Good For Home Use To Cut Thin Metal, Car Steel, Come With Pt31, Work With Standard Parts, The Buyer Easy To Find The Consumables From Market..
Brand: Inccala | Manufacturer: Inccala
Dimensions: 10.63 x 17.91 x 13.58 Inches | Weight: 17.64 pounds
See On Amazon #18
FLARING FC650DL Plasma Cutter, 65 Amp Non-Touch Pilot Arc Plasma Cutter Machine, 5/8 inch Clean Cut 3/4 inch Severance Cut, Dual Voltage 110/120V or 220/240V with Consumable Set Digital Display
Asin: B0CT4PVGQH | Model: FC650DL | PartNumber: FC650DL
Features
- 65A NON-TOUCH PILOT ARC PLASMA CUTTER Effortlessly cuts through rough, painted, and rusty surfaces while generating minimal slag. The pilot arc technology enables cutting without direct contact between the tip and the metal, resulting in improved cutting quality and extended consumable lifespan.
- POWERFUL CUTTING PERFORMANCE Automatic dual-voltage 120/240V. With advanced IGBT inverter technology, 10-60A DC output, 5/8 ideal clean cut and 3/4 maximum severance cut under 220/240V. 10-35A DC output, 3/8 ideal clean cut and 1/2 maximum severance cut under 110/120V. SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost.
- VOLTAGE TRANSFER The power cord plug installed on the machine is a 110V US standard plug. A conversion cord is included to easily convert 110V to 220V or 120V to 240V for use in your home, shop, or factory. 30A circuit breakers are recommended for 220V and 60A circuit breakers are recommended for 110V.
- PACKAGE INCLUDES FC650DL plasma cutter machine, upgrade plasma cutting torch AG60, ground clamp, air filter regulator, air hose, consumables, instruction manual etc.
- WARRANTY TRUSTED FROMR FLARING FLARING offer a 30 day money-back guarantee and 1-year new replacement warranty covered by our US based lifetime technical support. To avail the warranty, please contact online to activate the warranty when you receive the goods.
- PORTABLE AND EASY TO USE This plasma cutter machine only weighs 9 pounds, easy to carry. The pre-installed quick air coupling, only takes 30 seconds and you can start cutting. Significantly save your preparation time.
- See more on Amazon...
【Voltage Transfer】 The Power Cord Plug Installed On The Machine Is A 110V Us Standard Plug. A Conversion Cord Is Included To Easily Convert 110V To 220V Or 120V To 240V For Use In Your Home, Shop, Or Factory. 30A Circuit Breakers Are Recommended For 220V And 60A Circuit Breakers Are Recommended For 110V..
【Warranty Trusted Fromr Flaring】Flaring Offer A 30 Day Money-Back Guarantee And 1-Year New Replacement Warranty Covered By Our Us Based Lifetime Technical Support. To Avail The Warranty, Please Contact Online To Activate The Warranty When You Receive The Goods..
【Portable And Easy To Use】This Plasma Cutter Machine Only Weighs 9 Pounds, Easy To Carry. The Pre-Installed Quick Air Coupling, Only Takes 30 Seconds And You Can Start Cutting. Significantly Save Your Preparation Time..
【Package Includes】 Fc650dl Plasma Cutter Machine, Upgrade Plasma Cutting Torch Ag60, Ground Clamp, Air Filter Regulator, Air Hose, Consumables, Instruction Manual Etc..
【Powerful Cutting Performance】Automatic Dual-Voltage 120/240V. With Advanced Igbt Inverter Technology, 10-60A Dc Output, 5/8” Ideal Clean Cut And 3/4” Maximum Severance Cut Under 220/240V. 10-35A Dc Output, 3/8" Ideal Clean Cut And 1/2" Maximum Severance Cut Under 110/120V. Suitable Cutting For Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, Etc. Uses Non-Hazardous Compressed Air To Cut, Safe And At Low Cost..
Brand: FLARING | Manufacturer: FLARING
See On Amazon #19
SSIMDER Plasma Cutter 50Amp Plasma Cutter Machine with Dual Voltage 110V/220V Non-Pilot Arc 1/2 Inch Clean Cut Plasma Cutting Equipment with High Frequency Easy Metal Cutter LCD Display IGBT Inverter
Asin: B0BBL7V6TL | Model: CUT-50 | PartNumber: CUT-50
Features
- Powerful Cutting Ability The CUT 50 Plasma Cutter machine can achieve an ideal clean cut of 1/2" (10mm) and a maximum severance cut of up to 3/4" (20mm). This Plasma Cutter machine's effectiveness in cutting through rough, painted, and rusted surfaces are pretty good, improving work efficiency, and its suitability for various materials.
- Easy to Operate Plasma Cutter SSIMDER CUT50 Plasma Cutter has the convenience of dual voltage control for seamless switching between 110V and 220V. Plasma Cutting equipment is ease of use without the need for maintaining a specific arc distance, allowing users to control cutting quality and speed by adjusting the cutting depth and speed.
- IGBT technical The Plasma Cutting Equipment has overvoltage, overcurrent as well as overheat protection and uses advanced IGBT technology to cut all metals, making the Plasma Cutter machine more stable and safer. It also has automatic cooling fans and vents to effectively discharge the heat generated, which can better protect the machine and extend the service life of the cutter.
- Safety Guarantee SSIMDER CUT 50 portable Plasma Cutter's large LED design provides you with accurate data display, helping you to read all data more easily and clearly without taking off your helmet. Energy saving and noiseless operation, as well as its dual voltage function and sturdy handle make the Plasma Cutter portable and suitable for outdoor working environment.
- Professional Plasma Cutter Machine SSIMDER is a professional manufacturer of Plasma Cutter Machine providing high-quality Plasma Cutter Consumables and Plasma Cutter Accessories for a long time. We aim to provide a better Plasma Cutter Machine and make Plasma Cutting easier. If you have any questions, feel free to contact us
- See more on Amazon...
★ 【Igbt Technical】The Plasma Cutting Equipment Has Overvoltage, Overcurrent As Well As Overheat Protection And Uses Advanced Igbt Technology To Cut All Metals, Making The Plasma Cutter Machine More Stable And Safer. It Also Has Automatic Cooling Fans And Vents To Effectively Discharge The Heat Generated, Which Can Better Protect The Machine And Extend The Service Life Of The Cutter..
★ 【Professional Plasma Cutter Machine】Ssimder Is A Professional Manufacturer Of Plasma Cutter Machine Providing High-Quality Plasma Cutter Consumables And Plasma Cutter Accessories For A Long Time. We Aim To Provide A Better Plasma Cutter Machine And Make Plasma Cutting Easier. If You Have Any Questions, Feel Free To Contact Us.
★【Safety Guarantee】Ssimder Cut 50 Portable Plasma Cutter's Large Led Design Provides You With Accurate Data Display, Helping You To Read All Data More Easily And Clearly Without Taking Off Your Helmet. Energy Saving And Noiseless Operation, As Well As Its Dual Voltage Function And Sturdy Handle Make The Plasma Cutter Portable And Suitable For Outdoor Working Environment..
★【Easy To Operate Plasma Cutter 】Ssimder Cut50 Plasma Cutter Has The Convenience Of Dual Voltage Control For Seamless Switching Between 110V And 220V. Plasma Cutting Equipment Is Ease Of Use Without The Need For Maintaining A Specific Arc Distance, Allowing Users To Control Cutting Quality And Speed By Adjusting The Cutting Depth And Speed..
Brand: S SIMDER | Manufacturer: S SIMDER
See On Amazon #20
Plasma Cutter Pilot Arc 55A Non-touch Plasma Cutter machine PLC55P Dual Voltage 110V / 220V Upgrade DC Inverter IGBT Plasma Cuttering Equipment Digital Display 1/2 Inch Clean Cut
Asin: B07JHLYX46 | Ean: 6971119762155
Features
- Pilot arc plasma cutter - Our PLC55P is pilot arc non-touch cut metals and equipment the P-80 plasma cutting torch efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag; Pilot arc technology effectively protects consumables from corrosion and increases their lifespan.
- Upgrade IGBT technology - IGBT transistor produces a uniform output to enable cutting of thin metal and can reach high power output for cutting thick metal. IGBT machine is more stable than the MOSFET machine, can effectively save 30% of energy.
- 12mm Cutting thickness: Max output current 55A, deal cut thickness 1/2 (12mm), automatic dual voltage / dual frequency (110V/220V 50/60Hz). Voltage compensation to tackle with +/-15% electricity fluctuation.
- Outstanding cutting performance - the DC inverter cutting machine suitable for cut stainless steel, alloy steel, mild steel, copper, and aluminum. Designed for both demanding DIY and outdoor work, or home and hobby use.
- What you get: PLC55P x1, P80 plasma torch & Consumables, Pressure Filter & Accessories, user guide, 12 month guarantee.
- See more on Amazon...
12Mm Cutting Thickness: Max Output Current 55A, Deal Cut Thickness 1/2" (12Mm), Automatic Dual Voltage / Dual Frequency (110V/220V 50/60Hz). Voltage Compensation To Tackle With +/-15% Electricity Fluctuation..
What You Get: Plc55p X1, P80 Plasma Torch & Consumables, Pressure Filter & Accessories, User Guide, 12 Month Guarantee..
Outstanding Cutting Performance - The Dc Inverter Cutting Machine Suitable For Cut Stainless Steel, Alloy Steel, Mild Steel, Copper, And Aluminum. Designed For Both Demanding Diy And Outdoor Work, Or Home And Hobby Use..
Upgrade Igbt Technology - Igbt Transistor Produces A Uniform Output To Enable Cutting Of Thin Metal And Can Reach High Power Output For Cutting Thick Metal. Igbt Machine Is More Stable Than The Mosfet Machine, Can Effectively Save 30% Of Energy..
Brand: Tosense | Manufacturer: Tosense
See On Amazon #21
Lotos Supreme LTP5500DCNC Non-Touch Pilot Arc CNC Enabled Digital Plasma Cutter THC Torch Height Control Enabled, Dual Voltage 110V/220V, 3/5 inch Clean Cut, Brown
Asin: B07Y3Y12VF | Model: LTP5500DCNC | PartNumber: LTP5500DCNC | Ean: 0856117006455 | UPC: 856117006455
Features
- PORTABLE and POWERFUL--The LTP5500D can easily cut 3/5 (15 mm) metal with ultimate portability weighing only 15lbs; The LT5500D is an excellent choice for home DIY jobs and light duty small business projects. Non-HF--Non-HF Blowback Start, there is no HF interference.
- CNC ENABLED Pre-installed CNC Interface with THC (Torch Height Controller) signal output. Non-HF Blowback Start, there is no HF interference on your CNC computer.
- SETUP WITHIN 1 MIN--the per-installed NPT 1/4 industry type D plug and air filter regulator allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The Non-HF start 14ft torch with central connector save your time to connect the torch to your plasma cutter. The whole machine can be setup quickly within 1 min.
- INPUT: Automatic Dual Voltage 110~125V or 215~245V. Fully Output Circuit Breaker Requiement: 110V @ 50A and 220V @ 40A. Air Compressor Requirement: 70 PSI @ 4.0SCFM. OUTPUT: 20-55 A DC output, 3/5 ideal clean cut and 1 maximum severance cut under 220/240V. 20-35A DC output, 3/8 ideal clean cut and 1/2 maximum severance cut under 110/120V. SUITABLE CUTTING--for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost.
- BUY WITH CONFIDENCE: We offer 30 days refund and a 3-YEARS Limited Warranty: include 1 Year NEW Replacement Warranty. US BASED CUSTOMER CARE & SUPPORT TEAM: please feel free to contact us by phone or email, we always stand Back on Our Products. Please submit the registration form on our website.
- See more on Amazon...
★ Setup Within 1 Min--The Per-Installed Npt 1/4” Industry Type D Plug And Air Filter Regulator Allows You To Quick Connect To Your Air Compressor By Using The Stand Coupler Existing On Your Air Compressor. The Non-Hf Start 14Ft Torch With Central Connector Save Your Time To Connect The Torch To Your Plasma Cutter. The Whole Machine Can Be Setup Quickly Within 1 Min..
★ Buy With Confidence: We Offer 30 Days Refund And A 3-Years Limited Warranty: Include 1 Year New Replacement Warranty. ★ Us Based Customer Care & Support Team: Please Feel Free To Contact Us By Phone Or Email, We Always Stand Back On Our Products. Please Submit The Registration Form On Our Website..
★Input: Automatic Dual Voltage 110~125V Or 215~245V. Fully Output Circuit Breaker Requiement: 110V @ 50A And 220V @ 40A. Air Compressor Requirement: 70 Psi @ 4.0Scfm. ★Output: 20-55 A Dc Output, 3/5” Ideal Clean Cut And 1” Maximum Severance Cut Under 220/240V. 20-35A Dc Output, 3/8" Ideal Clean Cut And 1/2" Maximum Severance Cut Under 110/120V. ★Suitable Cutting--For Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, Etc. Uses Non-Hazardous Compressed Air To Cut, Safe And At Low Cost..
★ Cnc Enabled Pre-Installed Cnc Interface With Thc (Torch Height Controller) Signal Output. Non-Hf Blowback Start, There Is No Hf Interference On Your Cnc Computer..
Brand: LOTOS | Manufacturer: Lotos Technology
See On Amazon #22
Lotos LTP8000 80 A Plasma Cutter with Pilot ARC Metal Cutter, 1 inch Clean Cut, Brown
Asin: B07BHBPX38 | Model: LTP8000 | PartNumber: LTP8000 | Ean: 0856117006257 | UPC: 856117006257
Features
- CUT THICKNESS: Ideal Cut: 1" Inch; Maximum: 1 1/2" Inch. OUPUT: Current 20~80A Duty Cycle @ 40C (104F) 60% @80A & 100% @50A. SUITABLE: For stainless steel, alloy steel, mild steel, copper and aluminum. INPUT: Voltages 210~250V, 1PH, 50/60Hz; Current 200~220V, 1PH, 50A. Recommend Circuit Breaker Size: 60AMP.
- NON-TOUCH PILOT ARC: Pilot arc torch efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag. 2T/4T ENABLED: Release your finger for long time cut THE COMPATIBLE CONSUMABLES SETS for this BROWN Color LTP8000D Plasma Cutter are: BCON40 and BCON90. Please search Lotos BCON40 or BCON90
- BUY WITH CONFIDENCE: We offer 30 days refund and a 3-YEARS Limited Warranty: include 1 Year NEW Replacement Warranty. US BASED CUSTOMER CARE & SUPPORT TEAM: please feel free to contact us by phone or email, we always stand Back on Our Products. Please submit the registration form on our website.
- SETUP WITHIN 1 MIN: The pre-installed NPT 1/4 industry type D plug and air filter regulator allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The whole machine can be setup quickly within 1 min.
- PACKAGE INCLUDES: 80AMP Power supply, Plasma cutting torch, ground clamp, Pre-installed NPT 1/4 industry type D plug and Air filter regulator, consumables, Instruction Manual, etc.
- See more on Amazon...
★ Buy With Confidence: We Offer 30 Days Refund And A 3-Years Limited Warranty: Include 1 Year New Replacement Warranty. ★ Us Based Customer Care & Support Team: Please Feel Free To Contact Us By Phone Or Email, We Always Stand Back On Our Products. Please Submit The Registration Form On Our Website..
★ Package Includes: 80Amp Power Supply, Plasma Cutting Torch, Ground Clamp, Pre-Installed Npt 1/4” Industry Type D Plug And Air Filter Regulator, Consumables, Instruction Manual, Etc..
★ Setup Within 1 Min: The Pre-Installed Npt 1/4” Industry Type D Plug And Air Filter Regulator Allows You To Quick Connect To Your Air Compressor By Using The Stand Coupler Existing On Your Air Compressor. The Whole Machine Can Be Setup Quickly Within 1 Min..
★Non-Touch Pilot Arc: Pilot Arc Torch Efficiently Cuts Though Rough, Painted, And Rusty Surfaces And Produces Minimal Slag. ★ 2T/4T Enabled: Release Your Finger For Long Time Cut★ The Compatible Consumables Sets For This Brown Color Ltp8000d Plasma Cutter Are: Bcon40 And Bcon90. Please Search "Lotos Bcon40" Or "Bcon90".
First Available: 03/15/2018
Brand: LOTOS | Manufacturer: Lotos Technology
Weight: 38.00 Pounds
See On Amazon #23
LOTOS LT5000D 50A Air Inverter Plasma Cutter Dual Voltage 110/220VAC 1/2" Clean Cut
Asin: B004VFJL14 | Model: CP-81S5-QR0Q | PartNumber: CP-81S5-QR0Q | Ean: 0736211807571, 0856381005017 | UPC: 856381005017, 736211807571
Features
- & : Enhanced with , delivering a remarkable 25% increase in cutting power output compared to standard 50-amp plasma cutters. The advanced control systems and precision cutting flames of the newly designed torch ensure high-precision cuts with smooth and fine cut lines. Experience faster cutting speeds without compromising accuracy.
- & : Newly designed upgraded torch and consumables guarantee enhanced precision cutting and increased durability, leading to a much longer consumable lifespan. . The compact plasma cutter features a convenient handle for portability. It utilizes non-hazardous compressed air to effortlessly cut through various materials, including stainless steel, alloy steel, mild steel, copper, aluminum.
- : The pre-installed NPT 1/4 industry-type D plug and air filter regulator enable seamless connection to your air compressor using the existing stand coupler. Setting up the entire machine is effortless and can be completed within 1 minute. - : Emphasize the significance of pressure adjustment for attaining precise cutting. Ensures a 100% Air Leakage-Free Guarantee.
- : we offer a - & - along with a - covered by our US based lifetime technical support. To avail the warranty, please submit the warranty registration form on our website. - dedicated customer service team is readily available to assist you through phone or email.
- & : 10-50A DC output, 1/2 ideal clean cut and 3/4 maximum severance cut under 220/240V. 10-35A DC output, 1/3 ideal clean cut and 2/5 maximum severance cut under 110/120V. : Power supply, Plasma cutting torch, ground clamp, Pre-installed NPT 1/4 industry type D plug and Air filter regulator, consumables, Instruction Manual, etc.
- See more on Amazon...
★ 𝐄𝐚𝐬𝐲 𝐒𝐞𝐭𝐮𝐩 𝐰𝐢𝐭𝐡𝐢𝐧 𝟏 𝐌𝐢𝐧𝐮𝐭𝐞: The Pre-Installed Npt 1/4" Industry-Type D Plug And Air Filter Regulator Enable Seamless Connection To Your Air Compressor Using The Existing Stand Coupler. Setting Up The Entire Machine Is Effortless And Can Be Completed Within 1 Minute. ★ 𝐅𝐫𝐨𝐧𝐭-𝐌𝐨𝐮𝐧𝐭𝐞𝐝 𝐑𝐞𝐠𝐮𝐥𝐚𝐭𝐨𝐫: Emphasize The Significance Of Pressure Adjustment For Attaining Precise Cutting. Ensures A 100% Air Leakage-Free Guarantee..
★ 𝐎𝐮𝐭𝐩𝐮𝐭 & 𝐏𝐞𝐫𝐟𝐨𝐫𝐦𝐚𝐧𝐜𝐞: 10-50A Dc Output, 1/2” Ideal Clean Cut And 3/4” Maximum Severance Cut Under 220/240V. 10-35A Dc Output, 1/3" Ideal Clean Cut And 2/5" Maximum Severance Cut Under 110/120V. ★ 𝐏𝐚𝐜𝐤𝐚𝐠𝐞 𝐈𝐧𝐜𝐥𝐮𝐝𝐞𝐬: Power Supply, Plasma Cutting Torch, Ground Clamp, Pre-Installed Npt 1/4” Industry Type D Plug And Air Filter Regulator, Consumables, Instruction Manual, Etc..
★ 𝐋𝐢𝐟𝐞𝐭𝐢𝐦𝐞 𝐓𝐞𝐜𝐡𝐧𝐢𝐜𝐚𝐥 𝐒𝐮𝐩𝐩𝐨𝐫𝐭: We Offer A 𝟑𝟎 𝐝𝐚𝐲 𝐦𝐨𝐧𝐞𝐲-𝐛𝐚𝐜𝐤 𝐠𝐮𝐚𝐫𝐚𝐧𝐭𝐞𝐞 & 𝐚 𝟏-𝐲𝐞𝐚𝐫 𝐍𝐞𝐰 𝐑𝐞𝐩𝐥𝐚𝐜𝐞𝐦𝐞𝐧𝐭 𝐰𝐚𝐫𝐫𝐚𝐧𝐭𝐲 Along With A 𝐭𝐨𝐭𝐚𝐥 𝟑-𝐘𝐞𝐚𝐫 𝐥𝐢𝐦𝐢𝐭𝐞𝐝 𝐰𝐚𝐫𝐫𝐚𝐧𝐭𝐲 Covered By Our Us Based Lifetime Technical Support. To Avail The Warranty, Please Submit The Warranty Registration Form On Our Website. 𝐎𝐮𝐫 𝐔𝐒𝐀-𝐛𝐚𝐬𝐞𝐝 Dedicated Customer Service Team Is Readily Available To Assist You Through Phone Or Email..
★ 𝐒𝐚𝐟𝐞 & 𝐚𝐭 𝐋𝐨𝐰 𝐂𝐨𝐬𝐭: Newly Designed Upgraded Torch And Consumables Guarantee Enhanced Precision Cutting And Increased Durability, Leading To A Much Longer Consumable Lifespan. 𝐓𝐡𝐢𝐬 𝐡𝐞𝐥𝐩𝐬 𝐥𝐨𝐰𝐞𝐫 𝐲𝐨𝐮𝐫 𝐨𝐯𝐞𝐫𝐚𝐥𝐥 𝐮𝐬𝐚𝐠𝐞 𝐜𝐨𝐬𝐭𝐬. The Compact Plasma Cutter Features A Convenient Handle For Portability. It Utilizes Non-Hazardous Compressed Air To Effortlessly Cut Through Various Materials, Including Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum..
Brand: LOTOS | Manufacturer: Lotos Technology
Dimensions: 26.00 x 10.00 x 13.00 inches | Weight: 22.50 pounds
See On Amazon #24
PrimeWeld Plasma Cutting Table with Replaceable Slats, Plasma Cutter Table, Cutting Equipment, 32" H x 21" W x 30" L
Asin: B0BTJDLMYX | Model: P123 | PartNumber: P123
Features
- Plasma Cutting Solution - The PrimeWeld Plasma Cutting Table offers you an industrial solution to a problem that most face when trying to cut material with their plasma cutter or gas torch. Using this table you can lay your workpiece over the support slats and make cuts with your plasma cutter or gas torch and not worry about what to use to support the back side of the material.
- Sturdy, Carbon Steel Construction - The 250 pound capacity allows you to plasma cut or weld heavy plate steel. As an extra safety feature, the slag catch tray helps you to not worry about pieces falling to the floor.
- Work At The Right Height - This slatted-top, steel cutting table is the place to support your workpiece while plasma cutting or welding. The dimensions are 32H x 21W x 30 L and are designed to let you cut and work at the perfect height.
- Replaceable Slats - The PrimeWeld Plasma Cutting Table comes with 23 replaceable slats. The slat support spacing allows arcs and sparks from your welder or plasma cutter to penetrate the steel.
- PrimeWeld's Promise - If for any reason you're not satisfied with your Plasma Cutting Table, simply reach out to Customer Support and we'll make things right for you! All employees, parts and customer service Is located in the USA!
- See more on Amazon...
Work At The Right Height - This Slatted-Top, Steel Cutting Table Is The Place To Support Your Workpiece While Plasma Cutting Or Welding. The Dimensions Are 32"H X 21"W X 30" L And Are Designed To Let You Cut And Work At The Perfect Height..
Primeweld's Promise - If For Any Reason You're Not Satisfied With Your Plasma Cutting Table, Simply Reach Out To Customer Support And We'll Make Things Right For You! All Employees, Parts And Customer Service Is Located In The Usa!.
Replaceable Slats - The Primeweld Plasma Cutting Table Comes With 23 Replaceable Slats. The Slat Support Spacing Allows Arcs And Sparks From Your Welder Or Plasma Cutter To Penetrate The Steel..
Sturdy, Carbon Steel Construction - The 250 Pound Capacity Allows You To Plasma Cut Or Weld Heavy Plate Steel. As An Extra Safety Feature, The Slag Catch Tray Helps You To Not Worry About Pieces Falling To The Floor..
Brand: PRIMEWELD | Manufacturer: Prime Weld
See On Amazon #25
PRIMEWELD CUT60 60Amp Non-Touch Pilot Arc PT60 Torch Plasma Cutter 110V/220V Dual Voltage 3 Year Warranty
Asin: B07BYJPGB1
Features
- CUT60 PILOT ARC 3 year warranty 7 day per week support in USA
- PT60 blowback cutting torch WITH EURO CENTRAL CONNECTION
- Blow-back start technology, Pilot Arc
- 60% duty cycle at 60amps, 110/220 with adapter
- Continuous Pilot Arc enables you to cut expanded, rusted, painted metals
- See more on Amazon...
Blow-Back Start Technology, Pilot Arc.
Continuous Pilot Arc Enables You To Cut Expanded, Rusted, Painted Metals.
60% Duty Cycle At 60Amps, 110/220 With Adapter.
Pt60 Blowback Cutting Torch With Euro Central Connection.
Brand: PRIMEWELD | Manufacturer: PRIMEWELD
Dimensions: 19.00 x 20.00 x 11.00 Inches
See On Amazon #26
APC-70HF, Professional 70 Amp Non-touch Pilot Arc Plasma Cutter, 1.2 inch Clean Cut, 80% Duty Cycle, 90V to 300V Wide Voltage Cutting Machine
Asin: B08GC6KY1R | Model: APC-70HF | PartNumber: APC-70HF | Ean: 0039339474329, 0039339470963, 0039339474619 | UPC: 039339474619, 039339474329, 039339470963
Features
- APC-70HF incorporates the most advanced IGBT inverter technology and non-touch pilot arc cutting processes, resulting in excellent arc stability. The cutting effect is very ideal and can finish the work effortlessly and quickly, regardless if the material is very rough, rusty, greasy, dirty, spray painted, etc. The lightweight model design makes the machine very convenient to carry anywhere.
- APC-70HF can achieve perfect cutting, and the strength of its components makes it a reliable work tool for professionals or individuals. Can cut up to 1.2 in. stainless steel, alloy steel, low-carbon steel, copper, iron, pig iron, cast iron, aluminum alloy, aluminum and other conductive metals, resulting in straight cuts, angles, holes, curves, notches, slots, circles, v-grooves, and many others in minutes.
- APC-70HF is an intelligent power supply system. The automatic selection function can automatically detect the input voltage, so that you can easily use it in of 90V to 300V, and the machine will automatically adjust it. It is designed for demanding industrial work and construction and simple tasks around houses. With less work, you can achieve better results overall with sharper cuts.
- 80% duty cycle can ensure long-term and efficient cutting. NPT 1/4 inch industrial D-type coupler can easily and quickly connect to the air compressor. Extending the power cord by 700 feet can also resist power fluctuations and cable attenuation; the machine can still work normally. It is fully suitable for difficult operations in construction sites, ship docks, agricultural sites, and relatively remote areas.
- APC-70HF is designed with multiple safety and protection functions, such as automatic compensation for voltage fluctuations, over-heating protection, over-current protection, over-loading protection, plasma torch gun safety protection, etc. The fan with automatic temperature control allows the machine to run very quietly.
- See more on Amazon...
Apc-70Hf Is An Intelligent Power Supply System. The Automatic Selection Function Can Automatically Detect The Input Voltage, So That You Can Easily Use It In Of 90V To 300V, And The Machine Will Automatically Adjust It. It Is Designed For Demanding Industrial Work And Construction And Simple Tasks Around Houses. With Less Work, You Can Achieve Better Results Overall With Sharper Cuts..
Apc-70Hf Is Designed With Multiple Safety And Protection Functions, Such As Automatic Compensation For Voltage Fluctuations, Over-Heating Protection, Over-Current Protection, Over-Loading Protection, Plasma Torch Gun Safety Protection, Etc. The Fan With Automatic Temperature Control Allows The Machine To Run Very Quietly..
80% Duty Cycle Can Ensure Long-Term And Efficient Cutting. Npt 1/4 Inch Industrial D-Type Coupler Can Easily And Quickly Connect To The Air Compressor. Extending The Power Cord By 700 Feet Can Also Resist Power Fluctuations And Cable Attenuation; The Machine Can Still Work Normally. It Is Fully Suitable For Difficult Operations In Construction Sites, Ship Docks, Agricultural Sites, And Relatively Remote Areas..
Apc-70Hf Can Achieve Perfect Cutting, And The Strength Of Its Components Makes It A Reliable Work Tool For Professionals Or Individuals. Can Cut Up To 1.2 In. Stainless Steel, Alloy Steel, Low-Carbon Steel, Copper, Iron, Pig Iron, Cast Iron, Aluminum Alloy, Aluminum And Other Conductive Metals, Resulting In Straight Cuts, Angles, Holes, Curves, Notches, Slots, Circles, V-Grooves, And Many Others In Minutes..
Brand: AmicoPower | Manufacturer: Amico Power
Dimensions: 15.70 x 19.70 x 8.70 Inches | Weight: 31.00 pounds
See On Amazon #27
60CT Plasma Cutter, 55AMP Arc Plasma Cutter Machine, 220V Plasma Cutting Equipment, 4/5""Clean Cut With MOS Inverter Technology, High Heat Dissipation, Easy To Strike Arc
Asin: B0CYPDCJCD | Model: CUT 60CT | PartNumber: CUT 60CT
Features
- [Heat Dissipation And Self-Protection] Plasma Cutter is equipped with 4 independent heat sinks to maximize heat dissipation efficiency and adjustable flow rate; easy to arc at high frequencies; capable of overcurrent, overvoltage, and overheating protection
- [Good cutting performance] DC Air Plasma Cutting Machine can cut 3/5 cleanly with high precision. cutter machine surface is smooth and neat. The maximum steel thickness that can be cut is 2/5. A generator larger than 11.5 KVA is recommended.
- [Comes fully packaged] MOS Inverter Plasma Cutter ; SG-55 torch with 16.7 ft/11 AWG cable and 3 sets of tips and electrodes; Ground cable, 10 ft; Air filter, AW2000-02, with 2 connectors; Air hose , 10 feet, 0.31* 0.47; hose clamp, 0.24~ 0.47
- [Portable and design] Plasma Cutter Machine handle design is portable, easy to carry and carry, takes up little space, weighs only 17.6 pounds, and measures 16*6*12 inches.
- [Strong adaptability] Plasma Cutting Equipment can cut mild steel, stainless steel, aluminum and other metal materials.
- See more on Amazon...
[Comes Fully Packaged] Mos Inverter Plasma Cutter ; Sg-55 Torch With 16.7 Ft/11 Awg Cable And 3 Sets Of Tips And Electrodes; Ground Cable, 10 Ft; Air Filter, Aw2000-02, With 2 Connectors; Air Hose , 10 Feet, Φ0.31"*Φ0.47"; Hose Clamp, Φ0.24"~Φ0.47".
[Strong Adaptability] Plasma Cutting Equipment Can Cut Mild Steel, Stainless Steel, Aluminum And Other Metal Materials..
[Portable And Design] Plasma Cutter Machine Handle Design Is Portable, Easy To Carry And Carry, Takes Up Little Space, Weighs Only 17.6 Pounds, And Measures 16*6*12 Inches..
[Good Cutting Performance] Dc Air Plasma Cutting Machine Can Cut 3/5" Cleanly With High Precision. Cutter Machine Surface Is Smooth And Neat. The Maximum Steel Thickness That Can Be Cut Is 2/5". A Generator Larger Than 11.5 Kva Is Recommended..
Brand: Inccala | Manufacturer: china
See On Amazon #28
GZ GUOZHI Plasma Cutter, 65Amp Non-Touch Pilot Arc Plasma Cutter, Dual Voltage 110V/220V, LCD Display IGBT Inverter Cutting Machine, 3/5" Clean Cut,with 2T/4T/TEST
Asin: B0BFL169LY
Features
- Non-Touch Pilot Arc Plasma Cutter : GUOZHI 65 HF Plasma Cutter has high frequency non-touch pilot arc cutting processes, with high success rate of Arc starting and ideal cutting effect.
- Advanced Technology : 20A-65A current adjustment, 90V-260V wide-voltage design, unafraid of the voltage fluctuations, 110V/220V dual-voltage automatic conversion. High cutting speed, smooth cutting section and no polish demands.Maximum Cutting Thickness is 1, ideal clean cutting thickness is 3/5. It can cut normally at minus 20 degree.
- Safety Guarantee : This Cutter is with over-heating and over-current protection functions, with excellent and reliable quality, use more safety. 2T/4T/TEST function, easy to operation.
- Set Up within 1 Minute : MNPT 1/4 inch industrial D-type coupler, can easily and quickly connect to the air compressor, the users do not need to install the air pressure regulator. The whole machine can be setup quickly within 1 min.
- Quality Accessories : All accessories are made of high-quality materials. Package Included: CUT-65HF 65-Amp Plasma Cutting Machine, AG60 13-feet Plasma Torch Gun, 500 Amp Work Clamp with 10 Feet Cable, 220V to 110V Transfer Power Adapter, 0.3Nozzle, 0.4Nozzle,Electrodes*2, Ceramic Cups*2 and User Manual.
- See more on Amazon...
【Safety Guarantee】: This Cutter Is With Over-Heating And Over-Current Protection Functions, With Excellent And Reliable Quality, Use More Safety. 2T/4T/Test Function, Easy To Operation..
【Quality Accessories】: All Accessories Are Made Of High-Quality Materials. Package Included: Cut-65Hf 65-Amp Plasma Cutting Machine, Ag60 13-Feet Plasma Torch Gun, 500 Amp Work Clamp With 10 Feet Cable, 220V To 110V Transfer Power Adapter, 0.3"Nozzle, 0.4"Nozzle,Electrodes*2, Ceramic Cups*2 And User Manual..
【Set Up Within 1 Minute】: Mnpt 1/4 Inch Industrial D-Type Coupler, Can Easily And Quickly Connect To The Air Compressor, The Users Do Not Need To Install The Air Pressure Regulator. The Whole Machine Can Be Setup Quickly Within 1 Min..
【Advanced Technology 】: 20A-65A Current Adjustment, 90V-260V Wide-Voltage Design, Unafraid Of The Voltage Fluctuations, 110V/220V Dual-Voltage Automatic Conversion. High Cutting Speed, Smooth Cutting Section And No Polish Demands.Maximum Cutting Thickness Is 1", Ideal Clean Cutting Thickness Is 3/5". It Can Cut Normally At Minus 20 Degree..
Brand: GZ GUOZHI | Manufacturer: GZ GUOZHI
See On Amazon #29
Hobart - 500575 AirForce 27i Plasma Cutter
Asin: B0828JK294 | Model: 500575 | PartNumber: 500575 | Ean: 0715959674829 | UPC: 715959674829
Features
- Dual-voltage capability with MVP (multi-voltage plug)- allows you to connect to common 120 or 240 V power receptacles without the use of any tools - simply choose the plug that fits the receptacle.
- XT30R torch- Designed for increased comfort with an ergonomic trigger safety, more efficient cooling and economical replacement cutting tips
- Fan-on-demand- cooling system operates only when needed reducing power consumption and contaminants drawn into the machine.
- Power factor correction (PFC) circuitry - Draws up to 30% less amperage for the same cutting range as compared to the competition. PFC expands operators work area via extension cord, while minimizing nuisance circuit breaker trips caused by voltage drops.
- Postflow cooling circuit - Extends life of consumables and torch by cooling them with postflow air after trigger is released.
- See more on Amazon...
Fan-On-Demand- Cooling System Operates Only When Needed Reducing Power Consumption And Contaminants Drawn Into The Machine..
Postflow Cooling Circuit - Extends Life Of Consumables And Torch By Cooling Them With Postflow Air After Trigger Is Released..
Power Factor Correction (Pfc) Circuitry - Draws Up To 30% Less Amperage For The Same Cutting Range As Compared To The Competition. Pfc Expands Operators Work Area Via Extension Cord, While Minimizing Nuisance Circuit Breaker Trips Caused By Voltage Drops..
Xt30r Torch- Designed For Increased Comfort With An Ergonomic Trigger Safety, More Efficient Cooling And Economical Replacement Cutting Tips.
Brand: Hobart | Manufacturer: Hobart Welding Products
Weight: 19.00 pounds
Warranty: Hobart 5/3/1
See On Amazon #30
hynade Pilot Arc Plasma Cutter, PLC-50DP 50Amp High Frequency Non-Touch Pilot Arc Digital Plasma Cutter, DC Inverter 110/220V Dual Voltage Cutting Machine (PLC-50DP)
Asin: B09L6KRPVN | Ean: 0706189867846 | UPC: 706189867846
Features
- Pilot Arc Function, This is 50Amps plasma cutter With Pilot Arc Function, 110/220V dual voltage plasma cutting machine, It is IGBT air inverter technology 50/60Hz, severance max cutting thickness is 14mm, quality cutting thickness is 10mm, this plasma cutter is high frequency no need to touch metal get arc starting.
- Dual Voltage 110/220V, This pilot arc plasma cutter designed under 110/220V, auto indicate 110 and 220v, hand switch is not required on machine. There are two lights of voltage at front of panel, 110V lighting when connect machine to power 110V, LED 220V will lighting up when connect machine to power 220V, In this case the user easy knows the voltage.
- Cutting Thickness, this pilot arc plasma cutter easy cut all metals especially stainless steel. Quality cutting thickness for steel is 10mm#70PSI(0.65Mpa) 220V 50Amps, Max cutting thickness 14mm#70PSI 220V 50Amps; Under 110V 35Amps, the quality cutting thickness is 6mm#65PSI(0.6Mpa) 110V Max cutting thickness is 10mm#60PSI(0.6Mpa) 110V. The current for plasma cutting machine, 50Amps in 220V, 35Amps in 110V. for cut copper, 2-4mm#60PSI(0.6Mps)220V 50Amps is suggested.
- Post Time Function, Machine with function post time 2-15seconds, Adjust the time for the air keep blowing out from the torch head, Cooling torch and consumables soon.
- Quality accessories, We only producing high quality machine and supplying quality accessories. 4meters AG60P Pilot Arc Cutting torch coming with machine, earth clamp with 2 meters lead, 2 pcs torch electrodes, 2 pcs tip. 2 meters air hose, 1 air regulator. Machine come with 110V power plug, also with conversion wire adaptor(110V female to 220V male plug)
- See more on Amazon...
Cutting Thickness, This Pilot Arc Plasma Cutter Easy Cut All Metals Especially Stainless Steel. Quality Cutting Thickness For Steel Is 10Mm#70Psi(0.65Mpa) 220V 50Amps, Max Cutting Thickness 14Mm#70Psi 220V 50Amps; Under 110V 35Amps, The Quality Cutting Thickness Is 6Mm#65Psi(0.6Mpa) 110V Max Cutting Thickness Is 10Mm#60Psi(0.6Mpa) 110V. The Current For Plasma Cutting Machine, 50Amps In 220V, 35Amps In 110V. For Cut Copper, 2-4Mm#60Psi(0.6Mps)220V 50Amps Is Suggested..
Quality Accessories, We Only Producing High Quality Machine And Supplying Quality Accessories. 4Meters Ag60p Pilot Arc Cutting Torch Coming With Machine, Earth Clamp With 2 Meters Lead, 2 Pcs Torch Electrodes, 2 Pcs Tip. 2 Meters Air Hose, 1 Air Regulator. Machine Come With 110V Power Plug, Also With Conversion Wire Adaptor(110V Female To 220V Male Plug).
Post Time Function, Machine With Function Post Time 2-15Seconds, Adjust The Time For The Air Keep Blowing Out From The Torch Head, Cooling Torch And Consumables Soon..
Dual Voltage 110/220V, This Pilot Arc Plasma Cutter Designed Under 110/220V, Auto Indicate 110 And 220V, Hand Switch Is Not Required On Machine. There Are Two Lights Of Voltage At Front Of Panel, 110V Lighting When Connect Machine To Power 110V, Led 220V Will Lighting Up When Connect Machine To Power 220V, In This Case The User Easy Knows The Voltage..
Brand: hynade | Manufacturer: hynade
See On Amazon
Looking For Something Else?
Search