The ROP Shop - Buying Guide
Last Updated: 05/10/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
The ROP Shop Fuel Pump for John Deere L110 LT133 LT155 LX255 GT225 Lawn Mower Garden Tractors
Asin: B073HKKRC3 | Model: COM-40-1064_Z12 | PartNumber: COM-40-1064_Z12 | Ean: 0688957777451 | UPC: 688957777451
Includes - (1) Fuel Pump, (2) Fittings, (2) Gaskets, (1) Spacer, (1) Snap Ring & (2) Flange Bolts; Comes As Shown In The First Image.
Inlet & Outlet Fittings Must Be Installed On The New Fuel Pump Before Mounting. The Pump Housing Incorporates A Special Locking Feature To Retain The Fittings. The Release Tabs Must Be Depressed When The Fittings Are Installed, Removed, Or Damage To The Fitting And/Or O-Rings May Occur And Create A Potential Fuel Leak. Do Not Attempt To Install Or Force The Fittings Into Place Without First Depressing The Tabs. The Enclosed Snap Ring Will Serve As A Tool For This Purpose.
Not Compatible With Greater Than 10% Ethanol Fuel.
Specs - Arm Length: 1 5/8". Fits 1/4" Inner Diameter Fuel Line. Material: Plastic. Refer To Images 2 & 3 For More Information.
Features
- The ROP Shop replacement Fuel Pump for John Deere L110 LT133 LT155 LX255 GT225 Lawn Mower Garden Tractors
- Specs - Arm Length: 1 5/8. Fits 1/4 Inner Diameter Fuel Line. Material: Plastic. Refer to images 2 & 3 for more information
- Includes - (1) Fuel Pump, (2) Fittings, (2) Gaskets, (1) Spacer, (1) Snap Ring & (2) Flange Bolts; comes as shown in the first image
- NOT compatible with greater than 10% ethanol fuel
- Inlet & Outlet fittings must be installed on the new fuel pump before mounting. The pump housing incorporates a special locking feature to retain the fittings. The release tabs must be depressed when the fittings are installed, removed, or damage to the fitting and/or o-rings may occur and create a potential fuel leak. DO NOT attempt to install or force the fittings into place without first depressing the tabs. The enclosed snap ring will serve as a tool for this purpose
- See more on Amazon...
Brand: The ROP Shop
See On Amazon #2
The ROP Shop | (Pack of 2) Idler Pulleys for Chamberlain & LiftMaster 144C56 Garage Door Opener
Asin: B089YY5DMW | Model: 1014850002_1 | PartNumber: 1014850002_1
Includes - (2) Chain Cable Idler Pulleys; Comes As Shown In The First Image.
This Idler Pulley Applies To Tension To Guide The Chain Cable Through The End Of The Rail Closest To The Door. To Make This Repair To Your Garage Door You Will Need A Wrench Set, A Screwdriver And Pliers To Take Apart And Reassemble The Housing.
Fits Garage Door Openers With A Square Rail System.
Specs - Refer To Images 2 & 3 For More Information.
Features
- The ROP Shop replacement (Pack of 2) Idler Pulleys for Chamberlain & LiftMaster 144C56 Garage Door Opener
- Specs - Refer to images 2 & 3 for more information
- Includes - (2) Chain Cable Idler Pulleys; comes as shown in the first image
- Fits garage door openers with a square rail system
- This idler pulley applies to tension to guide the chain cable through the end of the rail closest to the door. To make this repair to your garage door you will need a wrench set, a screwdriver and pliers to take apart and reassemble the housing
- See more on Amazon...
Brand: The ROP Shop | Manufacturer: The ROP Shop
Weight: 0.10 pounds
See On Amazon #3
The ROP Shop Outlet Valve Kit for Homelite 308653025 & 308653045 Power Pressure Washer Pumps
Asin: B07S6ZJX4C | Model: 101355_5 | PartNumber: 101355_5
Includes - (1) Outlet Tube, (1) Unloader, (1) Chemical Injector, (4) O-Rings, & (5) Mounting Bolts; Comes As Shown In The First Image.
Fits Homelite & Himore Pressure Washer Pumps; 5-Bolt Pattern, So Will Not Fit Ar Or Troy Bilt Pumps.
Outlet Tube Inner Diameter: 9/16", Outlet Tube Outer Diameter: 22Mm (Thread Type: 16 Thread).
Specs - Outlet Tube Length: 2 7/16". Refer To Images 2 & 3 For More Information.
Features
- Replacement Outlet Valve Kit for Homelite 308653025 & 308653045 Power Pressure Washer Pumps
- Specs - Outlet Tube Length: 2 7/16. Refer to images 2 & 3 for more information
- Includes - (1) Outlet Tube, (1) Unloader, (1) Chemical Injector, (4) O-Rings, & (5) Mounting Bolts; comes as shown in the first image
- Outlet Tube Inner Diameter: 9/16, Outlet Tube Outer Diameter: 22mm (Thread Type: 16 Thread)
- Fits Homelite & Himore Pressure Washer Pumps; 5-bolt pattern, so will NOT fit AR or Troy Bilt pumps
- See more on Amazon...
Brand: The ROP Shop | Manufacturer: Himore
Dimensions: 5.00 x 7.00 x 2.00 inches
See On Amazon #4
The ROP Shop | (2) Pressure Washer Vent Oil Filler CAPS for Homelite 310606001 Power Water Pump
Asin: B076B11WDQ | Model: HIM-003 x 2_Z1 | PartNumber: HIM-003 x 2_Z1 | Ean: 7435009954987
Includes - (2) Vent Oil Filler Caps; Comes As Shown In The First Image.
Please Be Sure To Check Your Part Or Model Number To Ensure This Is The Correct Horizontal Vent Cap For Your Unit. Also, Please Note This May Replace Multiple Part Numbers.
This Cap Allows Air Into The Unit.
Specs - Refer To Images 2 & 3 For More Information.
Features
- The ROP Shop replacement (2) Pressure Washer Vent Oil Filler CAPS for Homelite 310606001 Power Water Pump
- Specs - Refer to images 2 & 3 for more information
- Includes - (2) Vent Oil Filler Caps; comes as shown in the first image
- This cap allows air into the unit
- Please be sure to check your part or model number to ensure this is the correct Horizontal Vent Cap for your unit. Also, please note this may replace multiple part numbers
- See more on Amazon...
Brand: The ROP Shop
Weight: 0.06 pounds
See On Amazon #5
The ROP Shop | 5-Pack - 3/16" Keyway Key for Power Pressure Washer Pumps & Small Engine Motors
Asin: B0CMXXHVBC | Model: 1013600005_3 | PartNumber: 1013600005_3
Includes - (1) Keyway Key; Comes As Shown In The First Image.
For/Fits Briggs & Stratton, Honda, Tecumseh & Other Small Engines, Annovi Reverberi, Himore, Homelite, Etc. Pressure Washer Pumps & Various Machines.
Overall Dimensions Are 3/16" X 1/4" X 1 1/8".
Specs - Width: 3/16". Length: 1 1/8". Refer To Images 2 & 3 For More Information.
Features
- The ROP Shop replacement (5-Pack) 3/16" Keyway Key for Power Pressure Washer Pumps & Small Engine Motors
- Specs - Width: 3/16. Length: 1 1/8. Refer to images 2 & 3 for more information
- Includes - (1) Keyway Key; comes as shown in the first image
- Overall dimensions are 3/16 x 1/4 x 1 1/8
- For/Fits Briggs & Stratton, Honda, Tecumseh & other small engines, Annovi Reverberi, Himore, Homelite, etc. pressure washer pumps & various machines
- See more on Amazon...
Brand: The ROP Shop | Manufacturer: The ROP Shop
See On Amazon #6
The ROP Shop | Pack of 2 - Hose Washers with Screen Filter for Pressure Washer Inlet Tube
Asin: B0BMGTVCTM | Model: 1017310002_6 | PartNumber: 1017310002_6
Includes - (2) Inlet Tube Screen Filters; Comes As Shown In The First Image.
Fits Most Common Water Hose Connections.
Rubber Washer With Molded-In Screen Filter. Self-Locking Tabs Keep Washer Firmly Set Inside Fittings.
Specs - Washer O.D.: 1". Washer I.D.: 11/16". Refer To Images 2 & 3 For More Information.
Features
- The ROP Shop replacement (Pack of 2) Hose Washers with Screen Filter for Pressure Washer Inlet Tube
- Specs - Washer O.D.: 1. Washer I.D.: 11/16. Refer to images 2 & 3 for more information
- Includes - (2) Inlet Tube Screen Filters; comes as shown in the first image
- Rubber washer with molded-in screen filter. Self-locking tabs keep washer firmly set inside fittings
- Fits most common water hose connections
- See more on Amazon...
Brand: The ROP Shop | Manufacturer: The ROP Shop
See On Amazon #7
The ROP Shop | New Water Inlet & Outlet Tubes 190632GS 190634GS 190589GS - Pressure Washer Pump
Asin: B07BMKJGM7 | Model: HIM-KIT-24_Z2 | PartNumber: HIM-KIT-24_Z2 | Ean: 7437101384310
Includes - (1) Water Inlet Tube With Ez Grip Garden Hose Connection, Filter & O-Ring (Comes Assembled) & (1) Universal Water Outlet Tube With O-Ring; Comes As Shown In The First Image.
Outlet Tube Is Durable And Threaded On Both Ends. Used To Connect The Pressure Hose To The Pump Assembly.
Inlet Tube Allows A User To Connect A Garden Hose To Their Unit, Which Supplies Water To The Unit.
Specs - Inlet Tube Connection Type: Ez Grip Garden Hose. Material: Aluminum. Refer To Images 2 & 3 For More Information.
Features
- The ROP Shop replacement New Water Inlet & Outlet Tubes 190632GS 190634GS 190589GS - Pressure Washer Pump
- Specs - Inlet Tube Connection Type: EZ Grip Garden Hose. Material: Aluminum. Refer to images 2 & 3 for more information
- Includes - (1) Water Inlet Tube with EZ Grip Garden Hose Connection, Filter & O-Ring (comes assembled) & (1) Universal Water Outlet Tube with O-Ring; comes as shown in the first image
- Inlet tube allows a user to connect a garden hose to their unit, which supplies water to the unit
- Outlet tube is durable and threaded on both ends. Used to connect the pressure hose to the pump assembly
- See more on Amazon...
Brand: The ROP Shop
See On Amazon #8
The ROP Shop | Outlet Valve Kit with Tube, Unloader, & Chemical Injector for Pressure Washers
Asin: B07S258ZCV | Model: 101355_1 | PartNumber: 101355_1
Includes - (1) Outlet Tube, (1) Unloader, (1) Chemical Injector, (4) O-Rings, & (5) Mounting Bolts; Comes As Shown In The First Image.
Fits Homelite & Himore Pressure Washer Pumps; 5-Bolt Pattern, So Will Not Fit Ar Or Troy Bilt Pumps.
Outlet Tube Inner Diameter: 9/16", Outlet Tube Outer Diameter: 22Mm (Thread Type: 16 Thread).
Specs - Outlet Tube Length: 2 7/16". Refer To Images 2 & 3 For More Information.
Features
- Replacement Outlet Valve Kit with Tube, Unloader, & Chemical Injector for Pressure Washers
- Specs - Outlet Tube Length: 2 7/16. Refer to images 2 & 3 for more information
- Includes - (1) Outlet Tube, (1) Unloader, (1) Chemical Injector, (4) O-Rings, & (5) Mounting Bolts; comes as shown in the first image
- Outlet Tube Inner Diameter: 9/16, Outlet Tube Outer Diameter: 22mm (Thread Type: 16 Thread)
- Fits Homelite & Himore Pressure Washer Pumps; 5-bolt pattern, so will NOT fit AR or Troy Bilt pumps
- See more on Amazon...
Brand: The ROP Shop | Manufacturer: Himore
Dimensions: 5.00 x 7.00 x 2.00 inches
See On Amazon #9
The ROP Shop OEM AR 2600 psi Power Pressure Washer Water Pump fits Troy-Bilt 020344 020344-0
Asin: B07D3D99ZH | Ean: 7437102910938
This Pump Is For Vertical Gas Engine Driven Units. This Pump Mounts Directly On To The Engine Shaft By Using A Keyed Hollow Shaft Connection System. The Mounting Flange Provides A Convenient Connection To Most 7/8” Diameter Shaft Vertical Gas Engines With At Least 5Hp.
Please Note It Is Not Recommended To Run Any Pressure Washer Pump Above Its Maximum Psi Rating. Doing So Can Result In Damage To The Pump (Not Covered By Warranty) And/Or Serious Bodily Injury.
Includes - (1) Vertical Pressure Washer Pump, Srmw22g26-Ez-Sx With Thermal Release Valve & Chemical Injector (Both Come Installed); Comes As Shown In The First Image (Does Not Include Engine Shaft Key Or Bolts).
Features
- Specs - Maximum Pressure: 2600 PSI. Maximum Flow: 2.2 GPM. Shaft Size: 7/8". 3 Bolt Pattern: 7 11/16 x 6 3/16 x 6 7/16 from center to center for each bolt hole. Maximum Fluid Temperature: 140 F. Inlet Type: 3/4" GHA. Outlet Type: 22mm x 14mm. Oil Capacity: 2.29oz. Refer to images 2 and 3 for more information
- Includes - (1) Vertical Pressure Washer Pump, SRMW22G26-EZ-SX with Thermal Release Valve & Chemical Injector (both come installed); comes as shown in the first image (does NOT include engine shaft key or bolts)
- This pump is for vertical gas engine driven units. This pump mounts directly on to the engine shaft by using a keyed hollow shaft connection system. The mounting flange provides a convenient connection to most 7/8 diameter shaft vertical gas engines with at least 5HP
- Please note it is not recommended to run any pressure washer pump above its maximum PSI rating. Doing so can result in damage to the pump (not covered by warranty) and/or serious bodily injury
- See more on Amazon...
Brand: The ROP Shop
Weight: 5.00 pounds
See On Amazon #10
The ROP Shop | Screw Drive Carriage for Genie 3060L, 3560, 3860, 4560, 4060L Garage Door Opener
Asin: B089QSBW1V | Model: 101484_8 | PartNumber: 101484_8
Includes - (1) Screw Drive Carriage; Comes As Shown In The First Image.
Easy Diy Replacement, The Screw Drive Carriage Even Has An Arrow Pointing To The Door To Make Sure It Goes On Correctly. We Recommend Using Low Temp Grease When Replacing The Carriage Assembly To Extend Life And Maximize Performance. The Carriage Is Designed To Protect The Screw Drive From Wear And Tear. Refer To Images 4 & 5 For More Installation Information.
The Genie Screw Drive Carriage Assembly With Magnet Has Teeth Inside It That Connect To The Screw Inside The Garage Door Opener Rail. The Carriage Teeth Gripping The Screw Allows For Smooth Operation Of Running The Garage Door Up And Down The Rail. If The Motor On Your Garage Door Opener Is Running And The Screw Drive Is Turning, But The Garage Door Is Not Operating (You May Even Hear A Grinding Or Chattering Noise), Then It Is Time To Replace The Screw Drive Carriage.
Specs - Refer To Images 2 & 3 For More Information.
Features
- The ROP Shop replacement Screw Drive Carriage for Genie 3060L, 3560, 3860, 4560, 4060L Garage Door Opener
- Specs - Refer to images 2 & 3 for more information
- Includes - (1) Screw Drive Carriage; comes as shown in the first image
- The Genie screw drive carriage assembly with magnet has teeth inside it that connect to the screw inside the garage door opener rail. The carriage teeth gripping the screw allows for smooth operation of running the garage door up and down the rail. If the motor on your garage door opener is running and the screw drive is turning, but the garage door is not operating (you may even hear a grinding or chattering noise), then it is time to replace the screw drive carriage
- Easy DIY replacement, the screw drive carriage even has an arrow pointing to the door to make sure it goes on correctly. We recommend using low temp grease when replacing the carriage assembly to extend life and maximize performance. The carriage is designed to protect the screw drive from wear and tear. Refer to images 4 & 5 for more installation information
- See more on Amazon...
Brand: The ROP Shop | Manufacturer: The ROP Shop
See On Amazon #11
The ROP Shop Oil Seal for Homelite 308653006, 308653025, 308653045 Pressure Washer Pumps
Asin: B07S985MY1 | Model: 101353_7 | PartNumber: 101353_7
Includes - (1) Oil Seal; Comes As Shown In The First Image.
Fits All Homelite & Himore Axial Pressure Washer Pumps.
Specs - Width: 2". Refer To Images 2 & 3 For More Information.
Features
- The ROP Shop replacement Oil Seal
- Specs - Width: 2. Refer to images 2 & 3 for more information
- Includes - (1) Oil Seal; comes as shown in the first image
- Fits all Homelite & Himore Axial Pressure Washer Pumps
- See more on Amazon...
Brand: The ROP Shop | Manufacturer: Himore
Dimensions: 3.00 x 3.00 x 1.00 inches
See On Amazon #12
The ROP Shop | Screw Drive Carriage for Genie IS550, IS550/B, IS850, IS900, IS900/B Garage Door
Asin: B089QT6M5S | Model: 101484_20 | PartNumber: 101484_20
Includes - (1) Screw Drive Carriage; Comes As Shown In The First Image.
Easy Diy Replacement, The Screw Drive Carriage Even Has An Arrow Pointing To The Door To Make Sure It Goes On Correctly. We Recommend Using Low Temp Grease When Replacing The Carriage Assembly To Extend Life And Maximize Performance. The Carriage Is Designed To Protect The Screw Drive From Wear And Tear. Refer To Images 4 & 5 For More Installation Information.
The Genie Screw Drive Carriage Assembly With Magnet Has Teeth Inside It That Connect To The Screw Inside The Garage Door Opener Rail. The Carriage Teeth Gripping The Screw Allows For Smooth Operation Of Running The Garage Door Up And Down The Rail. If The Motor On Your Garage Door Opener Is Running And The Screw Drive Is Turning, But The Garage Door Is Not Operating (You May Even Hear A Grinding Or Chattering Noise), Then It Is Time To Replace The Screw Drive Carriage.
Specs - Refer To Images 2 & 3 For More Information.
Features
- The ROP Shop replacement Screw Drive Carriage for Genie IS550, IS550/B, IS850, IS900, IS900/B Garage Door
- Specs - Refer to images 2 & 3 for more information
- Includes - (1) Screw Drive Carriage; comes as shown in the first image
- The Genie screw drive carriage assembly with magnet has teeth inside it that connect to the screw inside the garage door opener rail. The carriage teeth gripping the screw allows for smooth operation of running the garage door up and down the rail. If the motor on your garage door opener is running and the screw drive is turning, but the garage door is not operating (you may even hear a grinding or chattering noise), then it is time to replace the screw drive carriage
- Easy DIY replacement, the screw drive carriage even has an arrow pointing to the door to make sure it goes on correctly. We recommend using low temp grease when replacing the carriage assembly to extend life and maximize performance. The carriage is designed to protect the screw drive from wear and tear. Refer to images 4 & 5 for more installation information
- See more on Amazon...
Brand: The ROP Shop | Manufacturer: The ROP Shop
See On Amazon