Wishiot - Buying Guide
Last Updated: 05/22/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
Wishiot 4PCS 50KG Load Cell Weighing Sensor Half-Bridge Strain Gauge Human Body Scale Pressure Sensors + HX711 Amplifier AD Module (4sensor 1module)
Asin: B0CWLHXHMD | Model: FZ6096 | PartNumber: FZ6096
3.Variable Use, Can Be Combined To 50Kg/100Kg/200Kg..
5.【 Any Questions?】Please Click “Wishiot”(You Can Find "Sold By Wishiot" Under Buy Now Button), In The New Page, Click “Ask A Question”.
4. Comprehensive Accuracy: 0.3% F.S, Output (In) Impedance: 1000 ± 10Ω.
2.30*25*13Mm, Small Size, Easy To Install In Various Scenes..
Features
- 1.New 50kg load cell with foot pads to increase friction and prevent sliding caused by measurement errors
- 2.30*25*13mm, small size, easy to install in various scenes.
- 3.Variable use, can be combined to 50kg/100kg/200kg.
- 4. Comprehensive accuracy: 0.3% F.S, output (in) impedance: 1000 10
- 5. Any questions? Please click Wishiot (you can find Sold by Wishiot under Buy Now button), in the new page, click Ask a question
- See more on Amazon...
Brand: Wishiot | Manufacturer: Wishiot
Weight: 0.00 pounds
See On Amazon #2
Wishiot RC 1-8s Lipo Battery Voltage Tester Low Voltage Buzzer Alarm Voltage Checker Monitor LED Indicator for Lipo Life LiMn Li-ion Battery(2)
Asin: B089W64GKR | Model: DR0796X2 | PartNumber: DR0796X2
✧Voltage Display Function And Low Voltage Alarm Function，Protect The Battery From Overcharging Or Overdischarging.
✧【 Any Questions? / Mass Customization?】Please Click “Wishiot”(You Can Find "Sold By Wishiot" Under Buy Now Button), In The New Page, Click “Ask A Question” To Email Us.
✧When The Voltage Is Below The Set Value（Pre-Set Value 3.3V）,It Will Buzzer With Red Led Light, And Super Loud Alarm Sound Makes It Easier To Find Your Drone.
✧Use For 1-8S Lipo/Li-Ion/Limn/Li-Fe Rc Drone Battery, Automatic Protects Against Reverse Connection.
Features
- Low Voltage Alarm Mode for 2-8S, Function of Checking Your Lipo Cells Voltage
- Use for 1-8s Lipo/Li-ion/LiMn/Li-Fe RC drone battery, Automatic Protects Against Reverse Connection
- Voltage Display Function and Low Voltage Alarm Function Protect the Battery from Overcharging or Overdischarging
- When the Voltage is Below the Set Value Pre-set Value 3.3V ,It Will Buzzer with Red LED Light, and super loud alarm sound makes it easier to find your drone
- Any questions? / Mass customization? Please click Wishiot (you can find Sold by Wishiot under Buy Now button), in the new page, click Ask a question to email us
- See more on Amazon...
Brand: Wishiot | Manufacturer: Wishiot
Weight: 0.04 Pounds
See On Amazon #3
Wishiot 5pcs GY-521 MPU-6050 MPU6050 Acceleration Sensor 6dof Three-Axis Accelerometer Gyro Sensor IMU + 1pc 40Pin Male Header + 1pc 40Pin Male to Female Dupont Cable for Arduino RC Quadcopter Drone
Asin: B07V67DQ5N | Ean: 0747356634595 | UPC: 747356634595
Diy Your Own Project And Display The Mpu-6050 Sensor Readings On Oled Via Connecting It With R3 Mcu Board Or Nodemcu Esp32 Devkit.(Oled Display, R3 Mcu Board Or Esp32 Devkit, Breadboards Not Included In This Listing).
Any Questions, Please Contact Us Directly, We Will Do Our Best To Help You Solve The Problem Effectively!.
What You Will Get: 5Pcs Mpu-6050 Accelerometer Gyro Sensor With 5Pcs 8Pin Straight Pin Header And 5Pcs 8P Bend Pin Header, 1Pc 40P Female To Male Dupont Cable, 1Pc 40P Male Pin Header.
Use The Chip: Mpu-6050, Power Supply: 3V-5V.
Features
- Communication modes: standard IIC communication protocol
- Use the chip: MPU-6050, Power supply: 3V-5V
- DIY your own project and display the MPU-6050 Sensor Readings on oled via connecting it with R3 MCU Board or NodeMCU ESP32 Devkit.(oled display, R3 MCU board or ESP32 Devkit, breadboards not included in this listing)
- What you will get: 5pcs MPU-6050 Accelerometer Gyro Sensor with 5pcs 8Pin Straight Pin Header and 5pcs 8P Bend Pin Header, 1pc 40P Female to Male Dupont Cable, 1pc 40P Male Pin Header
- Any questions, please contact us directly, we will do our best to help you solve the problem effectively!
- See more on Amazon...
Brand: Wishiot | Manufacturer: Wishiot
See On Amazon #4
Wishiot Thumb Joystick Module Dual Axis Sensor Game Controller Sensor Joystick Breakout Module Compatible with Arduino PS2 Raspberry Pi (10)
Asin: B089VXPHDH | Model: LS0058X10 | PartNumber: LS0058X10
✧【Applicable】：Game Stick Module For Arduino Ps2, Electronic Building Block Standard Connector With 2.54Mm Pins, Can Be Easily Connected To Arduino By Normal Io Expansion Shield With Cables.
✧Please Feel Free To Ask Any Questions You May Have And Will Respond Within 24 Hours. We Will Give You A Satisfactory Solution.
✧【Output】：The Do Port Is Used For Digital Output, And The Ao Port Is Used For Analog Output.
✧【Composition】：The Joystick Is A Combination Of 2 Analog Potentiometers And A Digital Switch, Just Connect To The Two Analog Inputs And The Robot Can Listen To Your Commands With X,Y Control. Bidirectional 10 K Resistor, The Resistance Varies With The Joystick In Different Directions.
Features
- Regarding the voltage :You will get 10 joystick sensor modules. The module uses 5V power supply, and the original state reading voltage of X and Y is 2.5V. In the direction of the arrow, the voltage increases, the maximum value is 5V, and in the opposite direction of the arrow, the voltage value decreases, and the minimum value is 0V
- Composition The joystick is a combination of 2 analog potentiometers and a digital switch, just connect to the two analog inputs and the robot can listen to your commands with X,Y control. Bidirectional 10 k resistor, the resistance varies with the joystick in different directions
- Applicable Game stick module for Arduino PS2, electronic building block standard connector with 2.54mm pins, can be easily connected to Arduino by normal IO Expansion Shield with cables
- Output The DO port is used for digital output, and the AO port is used for analog output
- Please feel free to ask any questions you may have and will respond within 24 hours. We will give you a satisfactory solution
- See more on Amazon...
Brand: Wishiot | Manufacturer: Wishiot
Dimensions: 1.57 x 3.15 x 0.79 inches
See On Amazon #5
Wishiot 2pcs Zigbee Smart Plug Remote Control Outlet Adapter Switch Compatible with Alexa, Echo (4th gen) Echo Plus (2nd) Google Home, SmartThings Hub, eWeLink, Voice Pairing, Hub Required
Asin: B091Z1FW51
Easy To Install, Requires A Hub, Voice Pairing Alexa, Voice Control, Remote Control，No Need For A Third-Party App, Directly Controlled By The Alexa App，You Can Voice Control The Device Even If There Is No Network Suddenly.
【 Any Questions?】Please Click “Wishiot”(You Can Find "Sold By Wishiot" Under Buy Now Button), In The New Page, Click “Ask A Question” To Contact Us.
Energy Saving And Safe: With The Convenient Timer Function, The Smart Plug Can Protect The Devices Safely And Prevent Your Appliances From Overcharging And Overheating, And Reducing Energy Use.
How To Use This Zigbee Smart Plug? Make Sure That Your Device Is Compatible With Zigbee 3.0. Connect To And Manage Your Smart Home With The Built-In Hub. Power On The Device And Say,“Alexa, Discover My Devices." Alexa Will Automatically Detect And Set Them Up So That You Can Control Lights, Plugs, And More With Your Voice..
Features
- Why choose Zigbee? It can have more stable signal As more and more smart devices installed in your house, internet might becomging less stable,Hub+Zigbee,more stable,as long as there is stable Zigbee signal,a really good substitution for unstable Wi-Fi.
- How to use this Zigbee Smart Plug? Make sure that your device is compatible with Zigbee 3.0. Connect to and manage your smart home with the built-in hub. Power on the device and say, Alexa, discover my devices. Alexa will automatically detect and set them up so that you can control lights, plugs, and more with your voice.
- Easy to install, requires a hub, voice pairing Alexa, voice control, remote control No need for a third-party app, directly controlled by the Alexa app You can voice control the device even if there is no network suddenly
- Energy saving and safe: with the convenient timer function, the smart plug can protect the devices safely and prevent your appliances from overcharging and overheating, and reducing energy use
- Any questions? Please click Wishiot (you can find Sold by Wishiot under Buy Now button), in the new page, click Ask a question to contact us
- See more on Amazon...
Brand: Wishiot | Manufacturer: Wishiot
See On Amazon #6
Wishiot 2PCS 1kg 5kg 10kg 20kg Digital Load Cell Weight Sensor High Precision Miniature Load Cells for Arduino DIY Electronic Portable Kitchen Scale Sensors (5kg)
Asin: B0C3QH7V8M | Model: FZ1878X2 | PartNumber: FZ1878X2
Four Leads, Easy To Use,5-10V Drive Voltage Applied, The Force Is Directly Output As A Voltage Change Signal..
You Will Get 2Pcs 5Kg Load Cell Weight Sensor. Please Feel Free To Ask Any Questions You May Have And Will Respond Within 24 Hours..
Made Of High Quality Aluminium Alloy, Parallel Beam Structure, Suitable For Electronic Kitchen Scales, Small Appliances Force Measurement, Pet Feeders And Other Intelligent Weighing Equipment..
Connection：Red To E+ / Black To E- / Green To A+ / White To A-.
Features
- Weight options: 1kg 5kg 10kg 20kg
- Connection Red to E+ / Black to E- / Green to A+ / White to A-
- Four leads, easy to use,5-10V drive voltage applied, the force is directly output as a voltage change signal.
- Made of high quality aluminium alloy, parallel beam structure, suitable for electronic kitchen scales, small appliances force measurement, pet feeders and other intelligent weighing equipment.
- You will get 2pcs 5kg load cell weight sensor. Please feel free to ask any questions you may have and will respond within 24 hours.
- See more on Amazon...
Brand: Wishiot | Manufacturer: Wishiot
See On Amazon #7
Wishiot 2pcs Tiny 1.5g servo Micro Linear Digital Servo Lightweight Mini Size for Indoor Aircraft Small RC Plane with 3CH Digital Multi Servo Tester
Asin: B08BXN32WX | Model: LS-DR2533+LS0011 | PartNumber: LS-DR2533+LS0011
The Servo Can Work For Small Rc Plane.
Please Feel Free To Ask Any Questions You May Have And Will Respond Within 24 Hours. We Will Give You A Satisfactory Solution.
This Tester Can Test More Than 55 Grams Of Servos.
Ultra Small Size Of The 1.5G Servo：21.2 X 15.0 X 6.0Mm.
Features
- You will get 2pcs mini servo and 1pcs servo tester
- Ultra small size of the 1.5g servo 21.2 x 15.0 x 6.0mm
- The servo can work for Small RC Plane
- This tester can test more than 55 grams of servos
- Please feel free to ask any questions you may have and will respond within 24 hours. We will give you a satisfactory solution
- See more on Amazon...
Brand: Wishiot | Manufacturer: Wishiot
See On Amazon #8
Wishiot ESP8266 Burning Fixture Development Board Micro USB Port Onboard CP2102 Chip Support ESP-01S ESP-07 ESP-07S ESP-12E ESP-12F ESP-12S ESP-C2 Easy Programer
Asin: B08BXMGVNM | Model: HD3489 | PartNumber: HD3489
✧All I/O Ports Have Been Drawn Out, It Supports One-Click Firmware Download Function, And Add Burning, It Is Plug And Play, Very Easy To Program The Chip Module. Please Note That It Can Only Work With The Chip Module, Not Works With Implementing Whole Nodemcus Or Other Development Board.
✧Any Problem Please Contact Us Directly，Will Reply You In 24 Hours.
✧It Makes Programming Smd Esp Chips Into An Esp8266 Simple, It Has Breakout Pins Connections For Testing The Device And Code.
✧It Is Micro Usb Interface, Onboard Cp2102 Chip, Please Make Sure Your Pc Has Installed Cp2102 Driver.
Features
- Support ESP-S, ESP-01, ESP-01S, ESP-12F, ESP-F, ESP-12S,ESP-12E, ESP-C3F, ESP-C2
- It is Micro USB interface, onboard CP2102 chip, please make sure your PC has installed CP2102 driver
- All I/O ports have been drawn out, it supports one-click firmware download function, and add burning, it is plug and play, very easy to program the chip module. Please note that it can only work with the chip module, not works with implementing whole NodeMCUs or other development board
- It makes programming SMD ESP chips into an ESP8266 simple, it has breakout pins connections for testing the device and code
- Any problem please contact us directly will reply you in 24 hours
- See more on Amazon...
Brand: Wishiot | Manufacturer: Wishiot
See On Amazon #9
Wishiot ADXL345 Digital Accelerometer Module IIC/SPI 3-Axis Inclination Tilt Sensor with 10Pin Female to Female/Female to Male Dupont Cable for Arduino Raspberry Pi (Pack of 2)
Asin: B09T6VJWNY
3, The Commonly Used Pins Have Been Drawn Out, And It Is Soldered With Standard 2.54Mm Pin Header, Which Is Convenient For Dot Matrix Boards..
5, What You Will Get Is 2Pcs Adxl345 Accelerometer Module + 1Pc 10Pin 2.54Mm Female To Female Dupont Cable 20Cm + 1Pc 10Pin 2.54Mm Female To Male Dupont Cable 20Cm. 6, If You Have Any Question, Please Contact Us By Clicking "Wishiot" Under The Shopping Cart(You Can Find "Sold By Wishiot" Under Buy Now Button), In The New Page, Click "Ask A Question" To Contact Us..
4, Prepared 2 Cables For This Module, Female To Female Cable Is For Adxl345 With Mcu Which Is Onboard Male Pin Header Like Raspberry Pi Board, While Female To Male Cable Is For Adxl345 With Mcu Which Is Onboard Female Header Such As Unor3board..
2, Support 5V/3.3V Voltage Input, Onboard Rt9161 Power Chip, Lower Voltage Drop Compared With Chip 1117, Faster Load Response Speed, Very Suitable For High-Noise Power Supply Environment..
Features
- 1, Onboard ADXL345 digital output (support I2C/SPI), low power consumption, compact accelerometer.
- 2, Support 5V/3.3V voltage input, onboard RT9161 power chip, lower voltage drop compared with chip 1117, faster load response speed, very suitable for high-noise power supply environment.
- 3, The commonly used pins have been drawn out, and it is soldered with standard 2.54mm pin header, which is convenient for dot matrix boards.
- 4, Prepared 2 cables for this module, Female to Female cable is for ADXL345 with MCU which is onboard male pin header like Raspberry Pi board, while Female to Male cable is for ADXL345 with MCU which is onboard female header such as UNOR3board.
- 5, What you will get is 2pcs ADXL345 Accelerometer module + 1pc 10Pin 2.54mm Female to Female Dupont Cable 20cm + 1pc 10Pin 2.54mm Female to Male Dupont Cable 20cm. 6, If you have any question, please contact us by clicking Wishiot under the shopping cart(you can find Sold by Wishiot under Buy Now button), in the new page, click Ask a question to contact us.
- See more on Amazon...
Brand: Wishiot | Manufacturer: Wishiot
See On Amazon #10
Wishiot 2pcs Zig bee DIY Smart Switch Intelligent Breaker WiFi Wireless Light Switch Relay Module Compatible with Amazon Alexa Google Home Echo Dot SmartThings Hub
Asin: B09FLH2BVK | Model: LS0010X2 | PartNumber: LS0010X2
Please Ensure That The Electricity Is Safe. The Resistance Load Current Should Not Be Greater Than 10A..
What You Will Get Is: 2 X Zigbee Diy Smart Switch Intelligent Breaker. If You Have Any Question, Please Contact Us By Clicking"Wishiot" Under The Shopping Cart And Click" Ask A Question" In The New Page..
Not Support For Homekit Or Philips Hue..
Control Type: Ieee 802.15.4 Zigbee3.0，Input Voltage Range: 110-250V 50/60Hz，Maximum Power: 2200W.
Features
The wireless standard is Zigbee 3.0, please make sure your Echo or your Hub support 3.0(Echo must have Built-in Zigbee smart home hub). Use it for remote control of your device, schedule or timing your home appliance.
Control type: IEEE 802.15.4 ZigBee3.0 Input voltage range: 110-250V 50/60HZ Maximum power: 2200W
Please ensure that the electricity is safe. The resistance load current should not be greater than 10A.
Not support for Homekit or Philips Hue.
What you will get is: 2 X Zigbee DIY Smart Switch Intelligent Breaker. If you have any question, please contact us by clickingWISHIOT under the shopping cart and click Ask a question in the new page.- See more on Amazon...
Brand: Wishiot | Manufacturer: ShenZhen Doctors of Intelligence & Technology Co.,Ltd.
See On Amazon #11
Wishiot 2pcs DC3-6V TT Motor 1:48 Reduction Ratio 200RPM Dual Shaft Gearbox with Hookup Wires Male Dupont Connector + 2pcs 65mm Tire Wheel for Arduino Micro:bit Smart Car Chassis Robotics DIY Project
Asin: B07VBXXT9M | Model: LS3176 | PartNumber: LS3176 | Ean: 0747356634670 | UPC: 747356634670
Rated Voltage: 3~6V, Continuous No-Load Current: 150Ma +/- 10%.
【 Any Questions?】Please Click “Wishiot”(You Can Find "Sold By Wishiot" Under Buy Now Button), In The New Page, Click “Ask A Question” To Contact Us.
What You Will Get: 2Pcs Tt Motor And 2Pcs Tire Wheel (The Smart Chassis Kit In Picture Is Only For Display, Not Included In This Listing).
This Is A Dc Gearbox Tt Motor With A Gear Reduction Ratio Of 1:48 At Speed 200Rpm, And The Tt Motor Comes With 200Mm 28Awg Dupont Wire With Breadboard-Friendly 2.54Mm(0.1”) Male Connectors. Perfect For Plugging Into A Breadboard Or Terminal Blocks..
Features
- Application: for arduino controlled smart car chassis, Robotics
- This is a DC Gearbox TT Motor with a gear reduction ratio of 1:48 at speed 200rpm, and the TT motor comes with 200mm 28AWG dupont wire with breadboard-friendly 2.54mm(0.1 ) male connectors. Perfect for plugging into a breadboard or terminal blocks.
- Rated Voltage: 3~6V, Continuous No-Load Current: 150mA +/- 10%
- What you will get: 2pcs TT Motor and 2pcs Tire Wheel (the smart chassis kit in picture is only for display, not included in this listing)
- Any questions? Please click Wishiot (you can find Sold by Wishiot under Buy Now button), in the new page, click Ask a question to contact us
- See more on Amazon...
Brand: Wishiot | Manufacturer: Wishiot
Dimensions: 0.39 x 1.57 x 1.18 inches | Weight: 0.06 Pounds
See On Amazon #12
Wishiot 2pcs L298N Motor Driver Board Control Module with 4pcs TT Motor Kit DC Gearbox Motor Soldered with 2Pin Male Dupont Wire Dual Shaft DC3-6V Ratio 1:48 200rpm
Asin: B09T2N6R53 | Model: L298N TT motor | PartNumber: L298N TT motor
3, It Is Dc Gearbox Tt Motors With A Gear Reduction Ratio Of 1:48 At Speed 200Rpm, Dual Shaft, And The Motor Is Soldered With 2P Male Dupont Wire. Perfect For Plugging Into A Breadboard Or Terminal Blocks..
【 Any Questions?】Please Click “Wishiot”(You Can Find "Sold By Wishiot" Under Buy Now Button), In The New Page, Click “Ask A Question” To Contact Us.
5, What You Will Get: 4Pcs Tt Motor With 2P Dupont Wire, And 2Pcs L298n Motor Driver Control Module..
2, Motor Drive Control Module: L298n Is Used As The Main Driver Chip, It Is Dual Channel H-Bridge Driver. It Has The Strong Driving Ability, Low Calorific Value And Strong Anti-Interference Ability. Please Use An External 5V Logic Supply If You Use More Than 12V Driving Voltage, Otherwise, It Is Very Easy To Damage The Voltage Stabilizing Chip..
Features
- 1, L298N Motor driver with TT motor kit, is a good choice for smar car RC model, robotics, compatible for arduino Raspberry Pi and ESP32-CAM. The motor is pre-soldered with male dupont cable, which makes it easy for you for the wiring.
- 2, Motor Drive Control Module: L298N is used as the main driver chip, it is dual channel H-bridge driver. It has the strong driving ability, low calorific value and strong anti-interference ability. Please use an external 5V logic supply if you use more than 12V driving voltage, otherwise, it is very easy to damage the voltage stabilizing chip.
- 3, It is DC Gearbox TT Motors with a gear reduction ratio of 1:48 at speed 200rpm, dual shaft, and the motor is soldered with 2P male dupont wire. Perfect for plugging into a breadboard or terminal blocks.
- 5, What you will get: 4pcs TT Motor with 2P dupont wire, and 2pcs L298N Motor Driver Control Module.
- Any questions? Please click Wishiot (you can find Sold by Wishiot under Buy Now button), in the new page, click Ask a question to contact us
- See more on Amazon...
Brand: Wishiot | Manufacturer: Wishiot
Weight: 0.37 pounds
See On Amazon #13
Wishiot 1460pcs 1/4W 73 Values 1% Tolerance Electronic Metal Film Resistors Assortment Kit 10R-1M Ohm with a Band Sticker for Arduino Raspberry Pi Prototyping DIY Projects
Asin: B0B3MZYWJF
【Individual Package】The Resistors Are Assorted By Value And Separately Packaged In A Small Pe Bag With A Label Of The Resistor Value Marked, Which Makes It Convenient For You To Pick Up The Resistors You Need And Saves You Time Testing Each Value.
【 How To Connect Us? 】Please Click “Wishiot”(You Can Find "Sold By Wishiot" Under Buy Now Button), In The New Page, Click “Ask A Question” To Contact Us.
【Reasonable Size And Neatly Arranged】Resistors Is Very Basic Components For Electronic Experiment Or Diy Projects, Having It In Box Makes You Easy To Keep It, Every Value Separately Put In A Small Bag Will Not Make It A Mess For You If There Are Too Many Small Parts. It's Also A Good Choice For Arduino Beginners.
【73 Universal Values】The Kit Includes 73 Universal Values Resistors From 1 Ohm To 1M Ohm, It Can Fits For Most Of Prototyping Diy Experiments.
Features
- Low tolerance, resistance comparison table Electronic metal film resistors, 1/4W, 1% precision, 73 values each 20pcs Total Pack of 1460pcs in a cardboard box, with a Band Sticker
- 73 universal values The kit includes 73 universal values resistors from 1 ohm to 1M ohm, it can fits for most of prototyping diy experiments
- Individual package The resistors are assorted by value and separately packaged in a small PE bag with a label of the resistor value marked, which makes it convenient for you to pick up the resistors you need and saves you time testing each value
- Reasonable size and neatly arranged Resistors is very basic components for Electronic Experiment or DIY Projects, having it in box makes you easy to keep it, every value separately put in a small bag will not make it a mess for you if there are too many small parts. It's also a good choice for Arduino beginners
- How to connect us? Please click Wishiot (you can find Sold by Wishiot under Buy Now button), in the new page, click Ask a question to contact us
- See more on Amazon...
Brand: Wishiot | Manufacturer: Wishiot
See On Amazon #14
2pcs USB to ESP-01 CH340G Programmer + 1pc ESP Prog V1.0 USB to ESP8266 CH340C Programmer Downloader Module + 6pcs ESP-01S 4MB WiFi Wireless Serial Transceiver Module
Asin: B09VDGNDR7
3, The Red Usb Programmer Module Is Without Reset Button, While The Blue Esp Prog V1.0 Module Has Reset Button, This Button Is Used For Debugging And Downloading..
5, What You Will Get Is: 2Pcs Usb To Esp-01 Ch340g Programmer Module, 1Pc Esp Prog V1.0 Usb To Esp8266 Ch340c Downloader Module, 6Pcs Esp-01S 4Mb Wifi Module..
4, The Blue Esp Prog V1.0 Usb Programmer Module Has Esp8266 Auto-Download Circuit, It Is Very Convinent For User To Download Program, Update Firmware, And Debugging..
2, Esp-01 Wifi Module Can Be Directly Plugged Into The Female Pin Header Without Any Connection Wires, It Is Plug And Play..
Features
- 1, USB to serial TTL chip: CH340G, CH340C. Please make sure your PC has installed driver before you use it to flash firmware.
- 2, ESP-01 wifi module can be directly plugged into the female pin header without any connection wires, it is plug and play.
- 3, The red usb programmer module is without Reset button, while the blue ESP Prog V1.0 module has Reset button, this button is used for debugging and downloading.
- 4, The blue ESP Prog V1.0 USB programmer module has ESP8266 auto-download circuit, it is very convinent for user to download program, update firmware, and debugging.
- 5, What you will get is: 2pcs USB to ESP-01 CH340G Programmer module, 1pc ESP Prog V1.0 USB to ESP8266 CH340C Downloader Module, 6pcs ESP-01S 4MB Wifi Module.
- See more on Amazon...
Brand: Wishiot
See On Amazon #15
Wishiot 1pc ESP8266 Programming Burning Fixture Flash Downloader with 5pcs ESP-01S 4MB Wi-Fi Wireless Serial Transceiver Module
Asin: B09QSP99BY
3, The Esp-01S Is With 2X4 Pin Header, And You Can Plug It To The Interface Of Burner To Download The Firmware To Esp-01S/Esp01s. It Isalso Compatible With Ar-Duino Ide, Please Choose "Generic Esp8285 Module" Board In Ide..
5, If You Have Any Question, Please Contact Us By Email. You Can Click “Wishiot” Under The Shopping Cart(You Can Find "Sold By Wishiot" Under Buy Now Button), In The New Page, Click “Ask A Question” To Email Us.
4, Please Make Sure You Have Installed Cp2102 Driver When You Connect This Board Via Usb Cable To Your Pc..
2, All I/O Ports Have Been Drawn Out, It Supports One-Click Firmware Download Function, And Add Burning, It Is Plug And Play, Very Easy To Program The Chip Module. Please Note That It Can Only Work With The Chip Module, Not Works With Implementing Whole Nodemcus Or Other Development Board..
Features
- 1, ESP8266 Programming Burning Fixture Flash Downloader, support ESP-01S ESP-07 ESP-07S ESP-12E ESP-12F ESP-12S ESP-F
- 2, All I/O ports have been drawn out, it supports one-click firmware download function, and add burning, it is plug and play, very easy to program the chip module. Please note that it can only work with the chip module, not works with implementing whole NodeMCUs or other development board.
- 3, The ESP-01S is with 2X4 Pin header, and you can plug it to the interface of Burner to download the firmware to ESP-01S/ESP01S. It isalso compatible with Ar-duino IDE, please choose Generic ESP8285 Module board in IDE.
- 4, Please make sure you have installed cp2102 driver when you connect this board via USB cable to your PC.
- 5, If you have any question, please contact us by email. You can click Wishiot under the shopping cart(you can find Sold by Wishiot under Buy Now button), in the new page, click Ask a question to email us
- See more on Amazon...
Brand: Wishiot
See On Amazon