Wishiot ADXL345 Digital Accelerometer Module IIC/SPI 3-Axis Inclination Tilt Sensor with 10Pin Female to Female/Female to Male Dupont Cable for Arduino Raspberry Pi (Pack of 2)
Asin: B09T6VJWNY
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.3, The Commonly Used Pins Have Been Drawn Out, And It Is Soldered With Standard 2.54Mm Pin Header, Which Is Convenient For Dot Matrix Boards..
5, What You Will Get Is 2Pcs Adxl345 Accelerometer Module + 1Pc 10Pin 2.54Mm Female To Female Dupont Cable 20Cm + 1Pc 10Pin 2.54Mm Female To Male Dupont Cable 20Cm. 6, If You Have Any Question, Please Contact Us By Clicking "Wishiot" Under The Shopping Cart(You Can Find "Sold By Wishiot" Under Buy Now Button), In The New Page, Click "Ask A Question" To Contact Us..
4, Prepared 2 Cables For This Module, Female To Female Cable Is For Adxl345 With Mcu Which Is Onboard Male Pin Header Like Raspberry Pi Board, While Female To Male Cable Is For Adxl345 With Mcu Which Is Onboard Female Header Such As Unor3board..
2, Support 5V/3.3V Voltage Input, Onboard Rt9161 Power Chip, Lower Voltage Drop Compared With Chip 1117, Faster Load Response Speed, Very Suitable For High-Noise Power Supply Environment..
Features
- 1, Onboard ADXL345 digital output (support I2C/SPI), low power consumption, compact accelerometer.
- 2, Support 5V/3.3V voltage input, onboard RT9161 power chip, lower voltage drop compared with chip 1117, faster load response speed, very suitable for high-noise power supply environment.
- 3, The commonly used pins have been drawn out, and it is soldered with standard 2.54mm pin header, which is convenient for dot matrix boards.
- 4, Prepared 2 cables for this module, Female to Female cable is for ADXL345 with MCU which is onboard male pin header like Raspberry Pi board, while Female to Male cable is for ADXL345 with MCU which is onboard female header such as UNOR3board.
- 5, What you will get is 2pcs ADXL345 Accelerometer module + 1pc 10Pin 2.54mm Female to Female Dupont Cable 20cm + 1pc 10Pin 2.54mm Female to Male Dupont Cable 20cm. 6, If you have any question, please contact us by clicking Wishiot under the shopping cart(you can find Sold by Wishiot under Buy Now button), in the new page, click Ask a question to contact us.
- See more on Amazon...
Brand: Wishiot | Manufacturer: Wishiot
See On Amazon Similar To Wishiot ADXL345 Digital Accelerometer Module
#1
BIGTREETECH ADXL345 V2.0 Accelerometer Board Klipp-er Input Shaping 3D Printer Hotend Parts Sensor Module Support USB Connection for Voron Stealthburner
Asin: B0CHJQ6CXF
★Meets The Needs Of Klipper Input Shaping: Accurately Measures Resonance Frequencies, Reducing Print Rippling At High Speeds And Accelerations For More Precise Detail..
★What's In The Box？Adxl345 V2.0 × 1, M6 X 13 X 2 Silicone Ring × 2, M6 X 8 Socket Head Cap Screw × 1. All Parts Are Rigorously Tested Before Leaving The Factory. If There Is Any Problem With The Product, Can You Contact Us To Solve The Problem For You First? Our Technicians Are Always At Your Disposal..
★Effortless Wiring & Durable Connections: Reserved Solder Points Enable Users To Customize Wiring Easily, Enig Mounting Holes Ensure Stable Connections And Durability..
★Flexible Mounting Options : Method 1: Stealthburner Direct Mount- Effortlessly Install Adxl345 In The Designated Location, Streamlining The Setup Process And Saving Valuable Time; Method 2: Nozzle Mount- Attach Near The Nozzle For Precise Measurements.
Features
- Plug-and-Play: Effortlessly connect ADXL345 to your Klippered printer with a simple setup, taking advantage of high-performance MCU hardware SPI for data sampling and communication, and enjoy compatibility with various host systems, easily connect to Raspberry Pi or Manta boards + CB1 with USB ports using a standard USB-A to USB-C cable.
- Flexible Mounting Options : Method 1: StealthBurner Direct Mount- Effortlessly install ADXL345 in the designated location, streamlining the setup process and saving valuable time; Method 2: Nozzle Mount- Attach near the nozzle for precise measurements
- Meets the Needs of Klipper Input Shaping: Accurately measures resonance frequencies, reducing print rippling at high speeds and accelerations for more precise detail.
- Effortless Wiring & Durable Connections: Reserved solder points enable users to customize wiring easily, ENIG mounting holes ensure stable connections and durability.
- What's in the Box ADXL345 V2.0 1, M6 x 13 x 2 Silicone Ring 2, M6 x 8 Socket Head Cap Screw 1. All parts are rigorously tested before leaving the factory. If there is any problem with the product, can you contact us to solve the problem for you first? Our technicians are always at your disposal.
- See more on Amazon...
Brand: BIQU | Manufacturer: Octobigtree
See On Amazon #2
HiLetgo GY-521 MPU-6050 MPU6050 3 Axis Accelerometer Gyroscope Module 6 DOF 6-axis Accelerometer Gyroscope Sensor Module 16 Bit AD Converter Data Output IIC I2C for Arduino
Asin: B01DK83ZYQ
Chip Built-In 16Bit Ad Converter, 16Bit Data Output.
Acceleration Range : ±2 ±4 ±8 ±16G.
Gyroscopes Range: +/- 250 500 1000 2000 Degree/Sec.
Communication Mode : Standard Iic Communication Protocol.
Features
- MPU-6050 MPU6050 6-axis Accelerometer Gyroscope Sensor
- Communication mode : standard IIC communication protocol
- Chip built-in 16bit AD converter, 16bit data output
- Gyroscopes range: +/- 250 500 1000 2000 degree/sec
- Acceleration range : 2 4 8 16g
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #3
KUSBA: Klipper USB Accelerometer
Asin: B0C734JL4Z | Model: KUSBA | PartNumber: KUSBA
Compatible With Every 3D Printer Running Klipper And Has A Free Usb Port.
Comes With (Rampon Anchor) Firmware Pre-Flashed.
You Just Need This Pcb And A Usb C Cable, No Complicated And Unreliable Spi Wires.
Features
- Makes measuring resonances much easier by simplifying the wiring and config
- You just need this PCB and a USB C cable, no complicated and unreliable SPI wires
- Compatible with every 3D printer running Klipper and has a free USB port
- Comes with (Rampon Anchor) firmware pre-flashed
- See more on Amazon...
Brand: Isik's Tech | Manufacturer: Isik's Tech
See On Amazon #4
SHILLEHTEK ADXL345 Pre-Soldered 3-axis Accelerometer Compatible with Klipper, Raspberry Pi & Arduino | High Resolution Tilt-Sensing Accelerometer | Resonance Frequencies Measurement & Klipper Autotune
Asin: B0BXWHTXWT
[Pre-Soldered Convenience]: Get Started Immediately With The Pre-Soldered Shillehtek Adxl345. This User-Friendly Accelerometer Saves You Time And Hassle, Eliminating The Need For Soldering Skills Or Additional Equipment. A Practical Choice For Both Beginners And Experienced Users..
[Applications]: Ideal For Mobile And Stationary Applications, The Shillehtek Adxl345 Accurately Measures Tilt And Dynamic Accelerations. It’S Perfect For Devices Requiring High-Resolution Tilt Sensing, Motion Tracking, Or Shock Detection—Enhancing Both Personal And Professional Projects..
[Versatile Interfacing]: The Shillehtek Adxl345 Supports Both Spi And I2c Interfaces, Allowing For Flexible And Easy Integration With Raspberry Pi, Arduino, And Other Microcontrollers. This Makes It An Adaptable Solution For A Wide Range Of Projects And Applications..
[Flat Finish For Stability]: Redesigned To Offer A Flat Finish, The Shillehtek Adxl345 Features Pre-Attached Pins Engineered For Stability And High Performance. This Design Ensures Reliable Measurements, Perfect For Use With Klipper Firmware And Other Demanding Applications..
Features
- [OPTIMIZED FOR KLIPPER]: Enhance your 3D printer's performance with the SHILLEHTEK ADXL345 accelerometer. This sensor provides crucial data, boosting the accuracy and precision of your printer s movements. Ideal for users seeking to leverage Klipper s advanced features.
- [FLAT FINISH FOR STABILITY]: Redesigned to offer a flat finish, the SHILLEHTEK ADXL345 features pre-attached pins engineered for stability and high performance. This design ensures reliable measurements, perfect for use with Klipper firmware and other demanding applications.
- [PRE-SOLDERED CONVENIENCE]: Get started immediately with the pre-soldered SHILLEHTEK ADXL345. This user-friendly accelerometer saves you time and hassle, eliminating the need for soldering skills or additional equipment. A practical choice for both beginners and experienced users.
- [VERSATILE INTERFACING]: The SHILLEHTEK ADXL345 supports both SPI and I2C interfaces, allowing for flexible and easy integration with Raspberry Pi, Arduino, and other microcontrollers. This makes it an adaptable solution for a wide range of projects and applications.
- [APPLICATIONS]: Ideal for mobile and stationary applications, the SHILLEHTEK ADXL345 accurately measures tilt and dynamic accelerations. It s perfect for devices requiring high-resolution tilt sensing, motion tracking, or shock detection enhancing both personal and professional projects.
- See more on Amazon...
Brand: ST SHILLEHTEK | Manufacturer: Shenzhen Robotlinking
Dimensions: 3.94 x 3.94 x 3.94 inches | Weight: 0.02 Pounds
See On Amazon #5
WWZMDiB 2Pcs GY-291 ADXL345 Digital 3-Axis Acceleration of Gravity Tilt Module IIC/SPI Transmission for Arduino
Asin: B0BHP8CKDT | Ean: 0618202520174 | UPC: 618202520174
🥇【Accelerator Range】：+/-2G, +/-4G, +/-8G, +/-16G.
🥈【Communication Method】: Spi (3- And 4-Wire) And I2c Digital Interfaces.
⚡【Voltage】： 3-5V（For Arduino, 5V Is Recommended）.
Features
- GY-291 ADXL345 Digital 3-Axis Acceleration of Gravity Tilt Module : Measures static gravitational acceleration in tilt detection applications as well as dynamic acceleration due to motion or shock
- Voltage 3-5V For Arduino, 5V is Recommended
- Accelerator Range +/-2G, +/-4G, +/-8G, +/-16G
- Communication method : SPI (3- and 4-wire) and I2C digital interfaces
- See more on Amazon...
Brand: WWZMDiB | Manufacturer: WWZMDiB
See On Amazon #6
HiLetgo GY-291 ADXL345 3-Axis Digital Acceleration of Gravity Tilt Module for Arduino IIC/SPI Transmission
Asin: B01DLG4OU6 | Model: 3-01-0087-A | PartNumber: 3-01-0087-A | Ean: 0531958485354 | UPC: 531958485354
Its High Resolution (3.9 Mg / Lsb) Enables Measurement Of Tilt Angle Changes Of Less Than 1.0 °.
The Adxl345 Is Perfect For Mobile Device Applications. It Measures Static Gravitational Acceleration In Tilt Detection Applications As Well As Dynamic Acceleration Due To Motion Or Impact..
Low-Power Mode Supports Motion-Based Intelligent Power Management For Threshold Sensing And Motion Acceleration Measurement With Very Low Power Consumption..
The Digital Output Data Is In 16-Bit Twos Complement Format And Is Accessible Via Spi (3-Wire Or 4-Wire) Or I2c Digital Interface..
Features
- The ADXL345 is a small, thin, ultra-low power 3-axis accelerometer with high resolution (13 bits) and measurement range of 16g.
- The digital output data is in 16-bit twos complement format and is accessible via SPI (3-wire or 4-wire) or I2C digital interface.
- Its high resolution (3.9 mg / LSB) enables measurement of tilt angle changes of less than 1.0
- Low-power mode supports motion-based intelligent power management for threshold sensing and motion acceleration measurement with very low power consumption.
- The ADXL345 is perfect for mobile device applications. It measures static gravitational acceleration in tilt detection applications as well as dynamic acceleration due to motion or impact.
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #7
AOICRIE 3PCS GY-291 ADXL345 3-Axis Digital Acceleration of Gravity Tilt Module with IIC SPI Transmission for Arduino (3PCS)
Asin: B09S633YTW | Ean: 0701715508200 | UPC: 701715508200
☀Communication: It Uses Both I2c And Spi (Supports 3-, 4-Wire Spi) Interface..
☀Ultra Low Power: As Low As 23 Μa In Measurement Mode And 0.1 Μa In Standby Mode At Vs = 2.5 V (Typical)..
☀Widely Applications: Handsets, Medical Instrumentation, Gaming And Pointing Devices, Industrial Instrumentation, Personal Navigation Devices, Hard Disk Drive (Hdd) Protection, Portable Gaming..
☀Multiple Sensing Detect: Activity And Inactivity Sensing Detect The Presence Or Lack Of Motion By Comparing The Acceleration On Any Axis With User-Set Thresholds. Tap Sensing Detects Single And Double Taps In Any Direction. Free Fall Sensing Detects If The Device Is Falling..
Features
- FULL RESOLUTION: where resolution increases with g range, up to 13-bit resolution at 16 g (maintaining 4 mg/LSB scale factor in all g ranges)
- MULTIPLE SENSING DETECT: Activity and inactivity sensing detect the presence or lack of motion by comparing the acceleration on any axis with user-set thresholds. Tap sensing detects single and double taps in any direction. Free fall sensing detects if the device is falling.
- COMMUNICATION: It uses both I2C and SPI (supports 3-, 4-wire SPI) interface.
- WIDELY APPLICATIONS: Handsets, Medical instrumentation, Gaming and pointing devices, Industrial instrumentation, Personal navigation devices, Hard disk drive (HDD) protection, Portable gaming.
- ULTRA LOW POWER: as low as 23 A in measurement mode and 0.1 A in standby mode at VS = 2.5 V (typical).
- See more on Amazon...
Brand: AOICRIE | Manufacturer: AOICRIE
See On Amazon #8
SunFounder Digital Accelerometer ADXL345 Module Compatible with Arduino and Raspberry Pi
Asin: B0151FIBZO | Model: 4330118016 | PartNumber: 4330118016 | Ean: 0701715367548 | UPC: 701715367548
32 Level Output Data Fifo Minimizes The Load Of The Host Processor.
Working Voltage: 3.3V-5V; Pcb Size: 1.3 X 2.3 Cm.
Measurement Ranges Selectable And Bandwidth Selectable Via Serial Command.
Flexible Interrupt Modes – Any Interrupt Mappable To Either Interrupt Pin.
Features
- The ADXL345 is a small, thin, low power, three-axis accelerometer with high resolution (13-bit) measurement up to 16 g. Digital output data is formatted as 16-bit twos complement and is accessible through either an SPI (3- or 4-wire) or I2C digital interface
- Flexible interrupt modes Any interrupt mappable to either interrupt pin
- 32 level output data FIFO minimizes the load of the host processor
- Measurement ranges selectable and bandwidth selectable via serial command
- Working voltage: 3.3v-5v; PCB size: 1.3 x 2.3 cm
- See more on Amazon...
Brand: SunFounder | Manufacturer: SunFounder
Dimensions: 0.51 x 0.91 x 0.51 inches | Weight: 0.02 Pounds
See On Amazon #9
Adafruit ADXL345 - Triple-Axis Accelerometer (+-2g/4g/8g/16g) w/ I2C/SPI [ADA1231]
Asin: B01BT4N9BC | Model: OP-37062 | PartNumber: OP-37062 | Ean: 0701851956071, 0748347525168 | UPC: 701851956071, 748347525168
Pins That Can Be Used Either As I2c Or Spi Digital Interfacing.
Perfect Choice For Interfacing With Any 3V Or 5V Microcontroller Such As The Arduino.
Fully Assembled And Tested.
Three Axes Of Measurements, X Y Z With 4 Options For Sensitivity Level..
Features
- Added on-board 3.3V regulator and logic-level shifting circuitry
- Three axes of measurements, X Y Z with 4 options for sensitivity level.
- Pins that can be used either as I2C or SPI digital interfacing
- Fully Assembled and tested
- Perfect choice for interfacing with any 3V or 5V microcontroller such as the Arduino
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
See On Amazon #10
Adafruit 4097 ADXL343 - Triple-Axis Accelerometer (+-2g/4g/8g/16g) w/ I2C/SPI
Asin: B07PN6ZBJF
Budget Friendly Sensor.
3 Axis Measurements, X, Y, Z.
Perfect Choice For Interfacing With Any 3V Or 5V Microcontroller (Raspberry Pi Or Arduino Compatible).
Nearly Identical Specs To Adxl345.
Features
- STEMMA QT/ Sparkfun Qwiic compatible - No need to solder (Updated in 2022)
- Nearly identical specs to ADXL345
- Budget Friendly sensor
- Perfect choice for interfacing with any 3V or 5V microcontroller (Raspberry Pi or Arduino Compatible)
- 3 axis measurements, X, Y, Z
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
See On Amazon #11
EC Buying 2PCS ADXL335 Sensor Module Semiconductor Devices 3 Axis Accelerometer Angular Transducer Sensor Module Analog Acceleration Module Sensor Module GY-61 Analog Output 3V-5V
Asin: B0BXDJVQXZ
The 3-Axis Accelerometer Angular Transducer Sensor Analog X, Y, Z Three-Axis Output Angle Code Direct Output.
Widely Used For Electronic Diy, Lab, Experiment Etc.
The Adxl335 Is Available In A Small Size, Thin, 16-Pin, 4 Mm X 4 Mm X 1.45 Mm Plastic Pin Architecture Chip-Level Package.
It Can Measure The Static Acceleration Of Gravity In Tilt Detection Applications, As Well As The Dynamic Acceleration Due To Motion, Shock Or Vibration.
Features
- The ADXL335 provides signal conditioned voltage output and can measure acceleration in a minimum 3 g full scale range
- It can measure the static acceleration of gravity in tilt detection applications, as well as the dynamic acceleration due to motion, shock or vibration
- The 3-axis accelerometer angular transducer sensor analog X, Y, Z three-axis output angle code direct output
- The ADXL335 is available in a small size, thin, 16-pin, 4 mm x 4 mm x 1.45 mm plastic pin architecture chip-level package
- Widely used for electronic DIY, lab, experiment etc
- See more on Amazon...
Brand: EC Buying | Manufacturer: EC Buying
See On Amazon #12
Adafruit ADXL335-5V Ready Triple-axis Accelerometer (+-3g Analog Out) [ADA163]
Asin: B00NAY2TUC | Model: 100447 | PartNumber: 100447 | Ean: 8436565500983, 0701980281662, 0748347525922 | UPC: 748347525922, 701980281662
Two 2Mm (0.08") Mounting Holes For Easy Attachment..
The Xyz Filter Capacitors Are 0.1Uf For A 50 Hz Bandwidth.
Comes With 8 Pin 0.1" Standard Header.
Features
- Fully assembled and tested
- Comes with 8 pin 0.1 standard header
- Two 2mm (0.08) mounting holes for easy attachment.
- The XYZ filter capacitors are 0.1uF for a 50 Hz bandwidth
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 0.39 x 4.72 x 3.54 inches | Weight: 50.00 Grams
See On Amazon #13
Teyleten Robot GY-291 ADXL345 Digital 3-Axis Acceleration of Gravity Tilt Module IIC SPI for Arduino 5pcs
Asin: B08HLP1MPY | Model: D21 | PartNumber: D21 | Ean: 8425529930317
Adxl345 Is Very Suitable For Mobile Device Applications. It Can Be Used For Tilt Sensing Applications While Measuring Static Acceleration Of Gravity, And It Can Also Measure The Speed Of Vibration Caused By Dynamic Added Motion Or Caused. With Its High Resolution (4Mg/Lsb), It Can Measure Changes In The Inclination Angle Of About 0.25°. Use Adxl345 Digital Output Timing Acceleration, Etc., No Timing.
Communication Method: Iic / Spi Communication Protocol.
Up To ±16 G Accelerometer With High Resolution (13) Measurement. Digital Output.
With High Resolution (13 Bits) Measurement Up To ±16G. The Digital Output Data Is In 16-Bit Two-Valued Complement Format, Which Can Be Passed Through The I2c Digital Interface Spi (3-Wire Or 4-Wire).
According To The 16-Bit Two's Complement Format, It Can Be Accessed Through The Digital Interface Spi (3-Wire Or 4-Wire) Or I2c.
Features
- Brand new original ADXL345 chip, quality assurance
- According to the 16-bit two's complement format, it can be accessed through the digital interface SPI (3-wire or 4-wire) or I2C
- ADXL345 is very suitable for mobile device applications. It can be used for tilt sensing applications while measuring static acceleration of gravity, and it can also measure the speed of vibration caused by dynamic added motion or caused. With its high resolution (4mg/LSB), it can measure changes in the inclination angle of about 0.25 . Use ADXL345 digital output timing acceleration, etc., no timing
- With high resolution (13 bits) measurement up to 16g. The digital output data is in 16-bit two-valued complement format, which can be passed through the I2C digital interface SPI (3-wire or 4-wire)
- Communication method: IIC / SPI communication protocol
- Up to 16 g accelerometer with high resolution (13) measurement. Digital output
- See more on Amazon...
Brand: Teyleten Robot | Manufacturer: Teyleten Robot
Dimensions: 0.20 x 0.00 x 0.00 Inches
See On Amazon #14
ACEIRMC 4pcs GY-61 ADXL335 3-axis Analog Output Accelerometer Module Angular transducer 3V-5V for Arduino
Asin: B09SNXX1Y4 | Ean: 0701715446670 | UPC: 701715446670
These Are Great For Small Hobby 8Mm Or12mm Shaft/Rod Projects Such As 3D Printer, Engraving Machine..
Analog X, Y, Z Three-Axis Output Angle Code Direct Output.
Adxl335 3-Axis Accelerometer Angular Transducer Sensor Module Gy-61 Analog Output 3V-5V Compatible With Arduino.
They Are Double Sealed To Avoid Contaminants Entering And Save Lubricant..
Features
- These liner-motion bearings are made of high quality bearing steel for low noise and long service life.
- They are double sealed to avoid contaminants entering and save lubricant.
- These are great for small hobby 8mm or12mm shaft/rod projects such as 3D printer, engraving machine.
- ADXL335 3-Axis Accelerometer Angular Transducer Sensor Module GY-61 Analog Output 3V-5V Compatible with Arduino
- Analog X, Y, Z three-axis output angle code direct output
- See more on Amazon...
Brand: ACEIRMC | Manufacturer: ACEIRMC
See On Amazon #15
2Pcs GY-291 ADXL345 3-Axis Digital Three-axis Acceleration of Gravity Tilt Inclination Module IIC/SPI Transmission
Asin: B09JK5DP6R | Ean: 0701715489448 | UPC: 701715489448
3-Axis Digital Acceleration High Resolution (4 Mg / Lsb), Capable Of Measuring About 1.0 ° Of Inclination Angle Change, Use Adxl345 Digital Output Acceleration Timing, Etc, Without The Need For Analog To Digital Conversion, Reducing System Cost And Board Space..
Low Power Modes Enable Intelligent Motion-Based Power Management To A Very Low Power Consumption Threshold Sensing And Active Acceleration Measurement..
The Gy-291 Adxl345 Device Offers A Variety Of Special Detection. Activity And Inactivity Sensing Through Comparing Any Axis Acceleration Threshold Set By The User To Detect The Presence Or Absence Of Transport Movable Occurs.Tap Any Direction Sensing Detects Single And Dual Vibration Vibration Make. Free-Fall Detection Can Detect Whether The Device Is Falling. These Ones Function Can Be Mapped To Two Interrupt Output Pins..
Adxl345 Is Well Suited For Mobile Device Applications. It Can Tilt Sensing Applications Measuring The Static Acceleration Of Gravity, It Can Also Measure The Dynamic Add Motion Or Shock Caused Speed..
Features
- ADXL345 is a small, thin, low-power three-axis accelerometer can be high. Up to 16 g accelerometer with high resolution (13) measurements. Digital outputs according to a 16-bit twos complement format, can be accessed through the digital interface SPI (3-wire or 4-wire) or I2C.
- ADXL345 is well suited for mobile device applications. It can tilt sensing applications measuring the static acceleration of gravity, it can also measure the dynamic add motion or shock caused speed.
- 3-Axis digital acceleration high resolution (4 mg / LSB), capable of measuring about 1.0 of inclination angle change, use ADXL345 digital output acceleration timing, etc, without the need for analog to digital conversion, reducing system cost and board space.
- The gy-291 ADXL345 device offers a variety of special detection. Activity and inactivity sensing through comparing any axis acceleration threshold set by the user to detect the presence or absence of transport movable occurs.Tap any direction sensing detects single and dual vibration vibration make. Free-fall detection can detect whether the device is falling. These ones function can be mapped to two interrupt output pins.
- Low power modes enable intelligent motion-based power management to a very low power consumption threshold sensing and active acceleration measurement.
- See more on Amazon...
Brand: DORHEA | Manufacturer: DORHEA
See On Amazon #16
4PCS GY-291 ADXL345 3-Axis Digital Acceleration of Gravity Tilt Sensor Module IIC/SPI Transmission Compatible with Raspberry Pi(Welded)
Asin: B0C7H1KK7K | Ean: 0687117709394 | UPC: 687117709394
Advantages: Save Time And Effort With Pre-Soldered Gy-291 Adxl345 Module. No Need To Learn How To Solder Or Buy Soldering Equipment..
Applications: The Adxl345 Module Is Perfect For Mobile Device Applications. It Measures Static Gravitational Acceleration In Tilt Detection Applications As Well As Dynamic Acceleration Due To Motion Or Impact..
Low-Power Mode Supports Motion-Based Intelligent Power Management For Threshold Sensing And Motion Acceleration Measurement With Very Low Power Consumption..
The Digital Output Data Is In 16-Bit Twos Complement Format And Is Accessible Via Spi (3-Wire Or 4-Wire) Or I2c Digital Interface.Its High Resolution (3.9 Mg / Lsb) Enables Measurement Of Tilt Angle Changes Of Less Than 1.0 °.
Features
- The ADXL345 is a small, thin, ultra-low power 3-axis accelerometer with high resolution (13 bits) and measurement range of 16g.
- The digital output data is in 16-bit twos complement format and is accessible via SPI (3-wire or 4-wire) or I2C digital interface.Its high resolution (3.9 mg / LSB) enables measurement of tilt angle changes of less than 1.0
- Advantages: Save time and effort with Pre-Soldered GY-291 ADXL345 module. No need to learn how to solder or buy soldering equipment.
- Low-power mode supports motion-based intelligent power management for threshold sensing and motion acceleration measurement with very low power consumption.
- Applications: The ADXL345 module is perfect for mobile device applications. It measures static gravitational acceleration in tilt detection applications as well as dynamic acceleration due to motion or impact.
- See more on Amazon...
Brand: AITIAO | Manufacturer: AITIAO
See On Amazon #17
Adafruit (PID 163) ADXL335 - 5V ready triple-axis accelerometer (+-3g analog out)
Asin: B01G61HUPE | Model: LYSB01G61HUPE-ELECTRNCS | PartNumber: LYSB01G61HUPE-ELECTRNCS | Ean: 0717520028819 | UPC: 717520028819
Vcc Takes 5V In And Regulates It To 3.3V.
Some Soldering Required.
Includes Breakout And Headers.
50 Hz Bandwidth.
Features
- ADXL335 Analog Devices MEMS
- 50 Hz bandwidth
- VCC takes 5V in and regulates it to 3.3V
- Includes Breakout and headers
- Some soldering required
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 1.00 x 3.00 x 2.00 inches
See On Amazon #18
ATNSINC 10 Pcs GY-291 ADXL345 3-Axis Digital Acceleration of Gravity Tilt Module IIC/SPI Transmission for Arduino (10)
Asin: B0BZ88STVQ | Ean: 0701715491373 | UPC: 701715491373
Low-Power Mode Supports Motion-Based Intelligent Power Management For Threshold Sensing And Motion Acceleration Measurement With Very Low Power Consumption..
Ultra Low Power: As Low As 23 Μa In Measurement Mode And 0.1 Μa In Standby Mode At Vs = 2.5 V (Typical)..
Appliactions: It Can Used In Handsets, Medical Instrumentation, Gaming And Pointing Devices, Industrial Instrumentation, Personal Navigation Devices, Hard Disk Drive (Hdd) Protection, Portable Gaming..
The Adxl345 Is Perfect For Mobile Device Applications. It Measures Static Gravitational Acceleration In Tilt Detection Applications As Well As Dynamic Acceleration Due To Motion Or Impact.Its High Resolution (3.9 Mg / Lsb) Enables Measurement Of Tilt Angle Changes Of Less Than 1.0 °.
Features
- ADXL345 is a small, thin, ultra-low power 3-axis accelerometer with high resolution (13-bit), measurement at up to 16g. Digital output data is 16-bit twos complement format, can be accessed via I2C digital interface or SPI (3-wire or 4-wire).
- The ADXL345 is perfect for mobile device applications. It measures static gravitational acceleration in tilt detection applications as well as dynamic acceleration due to motion or impact.Its high resolution (3.9 mg / LSB) enables measurement of tilt angle changes of less than 1.0
- Low-power mode supports motion-based intelligent power management for threshold sensing and motion acceleration measurement with very low power consumption.
- Appliactions: It can used in Handsets, Medical instrumentation, Gaming and pointing devices, Industrial instrumentation, Personal navigation devices, Hard disk drive (HDD) protection, Portable gaming.
- ULTRA LOW POWER: as low as 23 A in measurement mode and 0.1 A in standby mode at VS = 2.5 V (typical).
- See more on Amazon...
Brand: ATNSINC | Manufacturer: ATNSINC
See On Amazon #19
EC Buying 3Pcs ADXL345 Digital Accelerometer Module Digital Tilt Sensor Acceleration Module IIC I2C SPI 3-Axis Inclination Tilt Sensor with 10Pin for Arduino Raspberry Pi
Asin: B0CZRKMWJ6
Effortlessly Integrate The Module Into Your Projects With Standard 2.54Mm Pin Headers And Conveniently Exposed Common Pins, Suitable For Use On Prototyping Boards..
Unlock The Potential Of Your Projects With The Precise And Responsive Digital Tilt Sensor Acceleration Module, Offering Accurate And Reliable Data Output For A Wide Range Of Applications..
Benefit From The Durable And High-Quality Construction Of The Double-Sided Gold-Plated Pcb Board, Measuring 28Mm X 14Mm, Ensuring Reliability And Longevity For Your Applications..
Enjoy Versatile Voltage Input Options Of 5V/3.3V And Enhanced Power Efficiency With The Onboard Rt9161 Power Chip, Ensuring Optimal Performance In High-Noise Power Environments..
Features
- ADXL345 digital accelerometer module, featuring IIC/SPI support and low power consumption for efficient 3-axis inclination tilt sensing.
- Enjoy versatile voltage input options of 5V/3.3V and enhanced power efficiency with the onboard RT9161 power chip, ensuring optimal performance in high-noise power environments.
- Effortlessly integrate the module into your projects with standard 2.54mm pin headers and conveniently exposed common pins, suitable for use on prototyping boards.
- Benefit from the durable and high-quality construction of the double-sided gold-plated PCB board, measuring 28mm x 14mm, ensuring reliability and longevity for your applications.
- Unlock the potential of your projects with the precise and responsive digital tilt sensor acceleration module, offering accurate and reliable data output for a wide range of applications.
- See more on Amazon...
Brand: EC Buying | Manufacturer: EC Buying
See On Amazon
Looking For Something Else?
Search