Teyleten Robot GY-291 ADXL345 Digital 3-Axis Acceleration of Gravity Tilt Module IIC SPI for Arduino 5pcs
Asin: B08HLP1MPY | Model: D21 | PartNumber: D21 | Ean: 8425529930317
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Adxl345 Is Very Suitable For Mobile Device Applications. It Can Be Used For Tilt Sensing Applications While Measuring Static Acceleration Of Gravity, And It Can Also Measure The Speed Of Vibration Caused By Dynamic Added Motion Or Caused. With Its High Resolution (4Mg/Lsb), It Can Measure Changes In The Inclination Angle Of About 0.25°. Use Adxl345 Digital Output Timing Acceleration, Etc., No Timing.
Communication Method: Iic / Spi Communication Protocol.
Up To ±16 G Accelerometer With High Resolution (13) Measurement. Digital Output.
With High Resolution (13 Bits) Measurement Up To ±16G. The Digital Output Data Is In 16-Bit Two-Valued Complement Format, Which Can Be Passed Through The I2c Digital Interface Spi (3-Wire Or 4-Wire).
According To The 16-Bit Two's Complement Format, It Can Be Accessed Through The Digital Interface Spi (3-Wire Or 4-Wire) Or I2c.
Features
- Brand new original ADXL345 chip, quality assurance
- According to the 16-bit two's complement format, it can be accessed through the digital interface SPI (3-wire or 4-wire) or I2C
- ADXL345 is very suitable for mobile device applications. It can be used for tilt sensing applications while measuring static acceleration of gravity, and it can also measure the speed of vibration caused by dynamic added motion or caused. With its high resolution (4mg/LSB), it can measure changes in the inclination angle of about 0.25 . Use ADXL345 digital output timing acceleration, etc., no timing
- With high resolution (13 bits) measurement up to 16g. The digital output data is in 16-bit two-valued complement format, which can be passed through the I2C digital interface SPI (3-wire or 4-wire)
- Communication method: IIC / SPI communication protocol
- Up to 16 g accelerometer with high resolution (13) measurement. Digital output
- See more on Amazon...
Brand: Teyleten Robot | Manufacturer: Teyleten Robot
Dimensions: 0.20 x 0.00 x 0.00 inches
See On Amazon Similar To Teyleten Robot GY291 ADXL345 Digital
#1
WWZMDiB 2Pcs GY-291 ADXL345 Digital 3-Axis Acceleration of Gravity Tilt Module IIC/SPI Transmission for Arduino
Asin: B0BHP8CKDT | Ean: 0618202520174 | UPC: 618202520174
🥇【Accelerator Range】：+/-2G, +/-4G, +/-8G, +/-16G.
🥈【Communication Method】: Spi (3- And 4-Wire) And I2c Digital Interfaces.
⚡【Voltage】： 3-5V（For Arduino, 5V Is Recommended）.
Features
- GY-291 ADXL345 Digital 3-Axis Acceleration of Gravity Tilt Module : Measures static gravitational acceleration in tilt detection applications as well as dynamic acceleration due to motion or shock
- Voltage 3-5V For Arduino, 5V is Recommended
- Accelerator Range +/-2G, +/-4G, +/-8G, +/-16G
- Communication method : SPI (3- and 4-wire) and I2C digital interfaces
- See more on Amazon...
Brand: WWZMDiB | Manufacturer: WWZMDiB
See On Amazon #2
AOICRIE 3PCS GY-291 ADXL345 3-Axis Digital Acceleration of Gravity Tilt Module with IIC SPI Transmission for Arduino (3PCS)
Asin: B09S633YTW | Ean: 0701715508200 | UPC: 701715508200
☀Communication: It Uses Both I2c And Spi (Supports 3-, 4-Wire Spi) Interface..
☀Ultra Low Power: As Low As 23 Μa In Measurement Mode And 0.1 Μa In Standby Mode At Vs = 2.5 V (Typical)..
☀Widely Applications: Handsets, Medical Instrumentation, Gaming And Pointing Devices, Industrial Instrumentation, Personal Navigation Devices, Hard Disk Drive (Hdd) Protection, Portable Gaming..
☀Multiple Sensing Detect: Activity And Inactivity Sensing Detect The Presence Or Lack Of Motion By Comparing The Acceleration On Any Axis With User-Set Thresholds. Tap Sensing Detects Single And Double Taps In Any Direction. Free Fall Sensing Detects If The Device Is Falling..
Features
- FULL RESOLUTION: where resolution increases with g range, up to 13-bit resolution at 16 g (maintaining 4 mg/LSB scale factor in all g ranges)
- MULTIPLE SENSING DETECT: Activity and inactivity sensing detect the presence or lack of motion by comparing the acceleration on any axis with user-set thresholds. Tap sensing detects single and double taps in any direction. Free fall sensing detects if the device is falling.
- COMMUNICATION: It uses both I2C and SPI (supports 3-, 4-wire SPI) interface.
- WIDELY APPLICATIONS: Handsets, Medical instrumentation, Gaming and pointing devices, Industrial instrumentation, Personal navigation devices, Hard disk drive (HDD) protection, Portable gaming.
- ULTRA LOW POWER: as low as 23 A in measurement mode and 0.1 A in standby mode at VS = 2.5 V (typical).
- See more on Amazon...
Brand: AOICRIE | Manufacturer: AOICRIE
See On Amazon #3
HiLetgo GY-291 ADXL345 3-Axis Digital Acceleration of Gravity Tilt Module for Arduino IIC/SPI Transmission
Asin: B01DLG4OU6 | Model: 3-01-0087-A | PartNumber: 3-01-0087-A | Ean: 0531958485354 | UPC: 531958485354
Its High Resolution (3.9 Mg / Lsb) Enables Measurement Of Tilt Angle Changes Of Less Than 1.0 °.
The Adxl345 Is Perfect For Mobile Device Applications. It Measures Static Gravitational Acceleration In Tilt Detection Applications As Well As Dynamic Acceleration Due To Motion Or Impact..
Low-Power Mode Supports Motion-Based Intelligent Power Management For Threshold Sensing And Motion Acceleration Measurement With Very Low Power Consumption..
The Digital Output Data Is In 16-Bit Twos Complement Format And Is Accessible Via Spi (3-Wire Or 4-Wire) Or I2c Digital Interface..
Features
- The ADXL345 is a small, thin, ultra-low power 3-axis accelerometer with high resolution (13 bits) and measurement range of 16g.
- The digital output data is in 16-bit twos complement format and is accessible via SPI (3-wire or 4-wire) or I2C digital interface.
- Its high resolution (3.9 mg / LSB) enables measurement of tilt angle changes of less than 1.0
- Low-power mode supports motion-based intelligent power management for threshold sensing and motion acceleration measurement with very low power consumption.
- The ADXL345 is perfect for mobile device applications. It measures static gravitational acceleration in tilt detection applications as well as dynamic acceleration due to motion or impact.
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #4
SHILLEHTEK ADXL345 Pre-Soldered 3-axis Accelerometer Compatible with Klipper, Raspberry Pi & Arduino | High Resolution Tilt-Sensing Accelerometer | Resonance Frequencies Measurement & Klipper Autotune
Asin: B0BXWHTXWT
[Pre-Soldered Convenience]: Get Started Immediately With The Pre-Soldered Shillehtek Adxl345. This User-Friendly Accelerometer Saves You Time And Hassle, Eliminating The Need For Soldering Skills Or Additional Equipment. A Practical Choice For Both Beginners And Experienced Users..
[Applications]: Ideal For Mobile And Stationary Applications, The Shillehtek Adxl345 Accurately Measures Tilt And Dynamic Accelerations. It’S Perfect For Devices Requiring High-Resolution Tilt Sensing, Motion Tracking, Or Shock Detection—Enhancing Both Personal And Professional Projects..
[Versatile Interfacing]: The Shillehtek Adxl345 Supports Both Spi And I2c Interfaces, Allowing For Flexible And Easy Integration With Raspberry Pi, Arduino, And Other Microcontrollers. This Makes It An Adaptable Solution For A Wide Range Of Projects And Applications..
[Flat Finish For Stability]: Redesigned To Offer A Flat Finish, The Shillehtek Adxl345 Features Pre-Attached Pins Engineered For Stability And High Performance. This Design Ensures Reliable Measurements, Perfect For Use With Klipper Firmware And Other Demanding Applications..
Features
- [OPTIMIZED FOR KLIPPER]: Enhance your 3D printer's performance with the SHILLEHTEK ADXL345 accelerometer. This sensor provides crucial data, boosting the accuracy and precision of your printer s movements. Ideal for users seeking to leverage Klipper s advanced features.
- [FLAT FINISH FOR STABILITY]: Redesigned to offer a flat finish, the SHILLEHTEK ADXL345 features pre-attached pins engineered for stability and high performance. This design ensures reliable measurements, perfect for use with Klipper firmware and other demanding applications.
- [PRE-SOLDERED CONVENIENCE]: Get started immediately with the pre-soldered SHILLEHTEK ADXL345. This user-friendly accelerometer saves you time and hassle, eliminating the need for soldering skills or additional equipment. A practical choice for both beginners and experienced users.
- [VERSATILE INTERFACING]: The SHILLEHTEK ADXL345 supports both SPI and I2C interfaces, allowing for flexible and easy integration with Raspberry Pi, Arduino, and other microcontrollers. This makes it an adaptable solution for a wide range of projects and applications.
- [APPLICATIONS]: Ideal for mobile and stationary applications, the SHILLEHTEK ADXL345 accurately measures tilt and dynamic accelerations. It s perfect for devices requiring high-resolution tilt sensing, motion tracking, or shock detection enhancing both personal and professional projects.
- See more on Amazon...
Brand: ST SHILLEHTEK | Manufacturer: Shenzhen Robotlinking
Dimensions: 3.94 x 3.94 x 3.94 inches | Weight: 0.02 pounds
See On Amazon #5
Adafruit ADXL335-5V Ready Triple-axis Accelerometer (+-3g Analog Out) [ADA163]
Asin: B00NAY2TUC | Model: 100447 | PartNumber: 100447 | Ean: 8436565500983, 0701980281662, 0748347525922 | UPC: 748347525922, 701980281662
Two 2Mm (0.08") Mounting Holes For Easy Attachment..
The Xyz Filter Capacitors Are 0.1Uf For A 50 Hz Bandwidth.
Comes With 8 Pin 0.1" Standard Header.
Features
- Fully assembled and tested
- Comes with 8 pin 0.1 standard header
- Two 2mm (0.08) mounting holes for easy attachment.
- The XYZ filter capacitors are 0.1uF for a 50 Hz bandwidth
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 0.39 x 4.72 x 3.54 inches | Weight: 50.00 Grams
See On Amazon #6
2Pcs GY-291 ADXL345 3-Axis Digital Three-axis Acceleration of Gravity Tilt Inclination Module IIC/SPI Transmission
Asin: B09JK5DP6R | Ean: 0701715489448 | UPC: 701715489448
3-Axis Digital Acceleration High Resolution (4 Mg / Lsb), Capable Of Measuring About 1.0 ° Of Inclination Angle Change, Use Adxl345 Digital Output Acceleration Timing, Etc, Without The Need For Analog To Digital Conversion, Reducing System Cost And Board Space..
Low Power Modes Enable Intelligent Motion-Based Power Management To A Very Low Power Consumption Threshold Sensing And Active Acceleration Measurement..
The Gy-291 Adxl345 Device Offers A Variety Of Special Detection. Activity And Inactivity Sensing Through Comparing Any Axis Acceleration Threshold Set By The User To Detect The Presence Or Absence Of Transport Movable Occurs.Tap Any Direction Sensing Detects Single And Dual Vibration Vibration Make. Free-Fall Detection Can Detect Whether The Device Is Falling. These Ones Function Can Be Mapped To Two Interrupt Output Pins..
Adxl345 Is Well Suited For Mobile Device Applications. It Can Tilt Sensing Applications Measuring The Static Acceleration Of Gravity, It Can Also Measure The Dynamic Add Motion Or Shock Caused Speed..
Features
- ADXL345 is a small, thin, low-power three-axis accelerometer can be high. Up to 16 g accelerometer with high resolution (13) measurements. Digital outputs according to a 16-bit twos complement format, can be accessed through the digital interface SPI (3-wire or 4-wire) or I2C.
- ADXL345 is well suited for mobile device applications. It can tilt sensing applications measuring the static acceleration of gravity, it can also measure the dynamic add motion or shock caused speed.
- 3-Axis digital acceleration high resolution (4 mg / LSB), capable of measuring about 1.0 of inclination angle change, use ADXL345 digital output acceleration timing, etc, without the need for analog to digital conversion, reducing system cost and board space.
- The gy-291 ADXL345 device offers a variety of special detection. Activity and inactivity sensing through comparing any axis acceleration threshold set by the user to detect the presence or absence of transport movable occurs.Tap any direction sensing detects single and dual vibration vibration make. Free-fall detection can detect whether the device is falling. These ones function can be mapped to two interrupt output pins.
- Low power modes enable intelligent motion-based power management to a very low power consumption threshold sensing and active acceleration measurement.
- See more on Amazon...
Brand: DORHEA | Manufacturer: DORHEA
See On Amazon #7
Adafruit ADXL345 - Triple-Axis Accelerometer (+-2g/4g/8g/16g) w/ I2C/SPI [ADA1231]
Asin: B01BT4N9BC | Model: OP-37062 | PartNumber: OP-37062 | Ean: 0701851956071, 0748347525168 | UPC: 701851956071, 748347525168
Pins That Can Be Used Either As I2c Or Spi Digital Interfacing.
Perfect Choice For Interfacing With Any 3V Or 5V Microcontroller Such As The Arduino.
Fully Assembled And Tested.
Three Axes Of Measurements, X Y Z With 4 Options For Sensitivity Level..
Features
- Added on-board 3.3V regulator and logic-level shifting circuitry
- Three axes of measurements, X Y Z with 4 options for sensitivity level.
- Pins that can be used either as I2C or SPI digital interfacing
- Fully Assembled and tested
- Perfect choice for interfacing with any 3V or 5V microcontroller such as the Arduino
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
See On Amazon #8
5pcs GY-291 ADXL345 3-Axis Digital Acceleration of Gravity Tilt Module IIC/SPI Transmission
Asin: B09Y36QGHB | Ean: 0701715513143 | UPC: 701715513143
【Adxl345 3-Axis Accelerometer Module】This Module Is A Small, Thin, Ultra-Low Power 3-Axis Accelerometer With High Resolution (13-Bit), Measurement At Up To ± 16G.
【Gy-291 Adxl345 Applications】It Can Used In Handsets, Instrumentation, Gaming And Pointing Devices, Industrial Instrumentation, Personal Navigation Devices, Hard Disk Drive (Hdd) Protection, Portable Gaming.
【Exquisite Quality】The Gy-291 Adxl345 3-Axis Digital Acceleration Module Is Perfect For Mobile Device Applications. It Measures Static Gravitational Acceleration In Tilt Detection Applications As Well As Dynamic Acceleration Due To Motion Or Impact.Its High Resolution (3.9 Mg / Lsb) Enables Measurement Of Tilt Angle Changes Of Less Than 1.0 °.
【Adxl345 Power Supply】3-5V; Means Of Communication: The Iic / Spi Communication Protocol.
Features
- Module Model GY-291; Main Chip ADXL345
- ADXL345 Power Supply 3-5V; Means of communication: the iic / spi communication protocol
- ADXL345 3-Axis Accelerometer Module This module is a small, thin, ultra-low power 3-axis accelerometer with high resolution (13-bit), measurement at up to 16g
- Exquisite Quality The GY-291 ADXL345 3-Axis digital acceleration module is perfect for mobile device applications. It measures static gravitational acceleration in tilt detection applications as well as dynamic acceleration due to motion or impact.Its high resolution (3.9 mg / LSB) enables measurement of tilt angle changes of less than 1.0
- GY-291 ADXL345 Applications It can used in handsets, instrumentation, gaming and pointing devices, industrial instrumentation, personal navigation devices, hard disk drive (HDD) protection, portable gaming
- See more on Amazon...
Brand: Coliao | Manufacturer: Coliao
See On Amazon #9
SunFounder Digital Accelerometer ADXL345 Module Compatible with Arduino and Raspberry Pi
Asin: B0151FIBZO | Model: 4330118016 | PartNumber: 4330118016 | Ean: 0701715367548 | UPC: 701715367548
32 Level Output Data Fifo Minimizes The Load Of The Host Processor.
Working Voltage: 3.3V-5V; Pcb Size: 1.3 X 2.3 Cm.
Measurement Ranges Selectable And Bandwidth Selectable Via Serial Command.
Flexible Interrupt Modes – Any Interrupt Mappable To Either Interrupt Pin.
Features
- The ADXL345 is a small, thin, low power, three-axis accelerometer with high resolution (13-bit) measurement up to 16 g. Digital output data is formatted as 16-bit twos complement and is accessible through either an SPI (3- or 4-wire) or I2C digital interface
- Flexible interrupt modes Any interrupt mappable to either interrupt pin
- 32 level output data FIFO minimizes the load of the host processor
- Measurement ranges selectable and bandwidth selectable via serial command
- Working voltage: 3.3v-5v; PCB size: 1.3 x 2.3 cm
- See more on Amazon...
Brand: SunFounder | Manufacturer: SunFounder
Dimensions: 0.51 x 0.91 x 0.51 inches | Weight: 0.02 pounds
See On Amazon #10
AITIAO 4PCS GY-291 ADXL345 3-Axis Digital Acceleration of Gravity Tilt Module IIC/SPI Transmission
Asin: B09T2XWXT1 | Ean: 0701715511873 | UPC: 701715511873
With High Resolution (13 Bits) Measurement Up To ±16G. The Digital Output Data Is In 16-Bit Two-Valued Complement Format, Which Can Be Passed Through The I2c Digital Interface Spi (3-Wire Or 4-Wire).
Wide Application: The Gy-291 Adxl345 Module Widely Used In Handsets, Medical Instrumentation, Gaming And Pointing Devices, Industrial Instrumentation, Personal Navigation Devices, Hard Disk Drive (Hdd) Protection, Portable Gaming.
Low-Power Mode Supports Motion-Based Intelligent Power Management For Threshold Sensing And Motion Acceleration Measurement With Very Low Power Consumption.
Ultra Low Power: As Low As 23 Μa In Measurement Mode And 0.1 Μa In Standby Mode At Vs = 2.5 V (Typical).
Features
- The GY-291 ADXL345 module is perfect for mobile device applications. It measures static gravitational acceleration in tilt detection applications as well as dynamic acceleration due to motion or impact.Its high resolution (3.9 mg / LSB) enables measurement of tilt angle changes of less than 1.0
- ULTRA LOW POWER: as low as 23 A in measurement mode and 0.1 A in standby mode at VS = 2.5 V (typical)
- With high resolution (13 bits) measurement up to 16g. The digital output data is in 16-bit two-valued complement format, which can be passed through the I2C digital interface SPI (3-wire or 4-wire)
- Low-power mode supports motion-based intelligent power management for threshold sensing and motion acceleration measurement with very low power consumption
- Wide Application: The GY-291 ADXL345 module widely used in Handsets, Medical instrumentation, Gaming and pointing devices, Industrial instrumentation, Personal navigation devices, Hard disk drive (HDD) protection, Portable gaming
- See more on Amazon...
Brand: AITIAO | Manufacturer: AITIAO
See On Amazon #11
Wishiot ADXL345 Digital Accelerometer Module IIC/SPI 3-Axis Inclination Tilt Sensor with 10Pin Female to Female/Female to Male Dupont Cable for Arduino Raspberry Pi (Pack of 2)
Asin: B09T6VJWNY
3, The Commonly Used Pins Have Been Drawn Out, And It Is Soldered With Standard 2.54Mm Pin Header, Which Is Convenient For Dot Matrix Boards..
5, What You Will Get Is 2Pcs Adxl345 Accelerometer Module + 1Pc 10Pin 2.54Mm Female To Female Dupont Cable 20Cm + 1Pc 10Pin 2.54Mm Female To Male Dupont Cable 20Cm. 6, If You Have Any Question, Please Contact Us By Clicking "Wishiot" Under The Shopping Cart(You Can Find "Sold By Wishiot" Under Buy Now Button), In The New Page, Click "Ask A Question" To Contact Us..
4, Prepared 2 Cables For This Module, Female To Female Cable Is For Adxl345 With Mcu Which Is Onboard Male Pin Header Like Raspberry Pi Board, While Female To Male Cable Is For Adxl345 With Mcu Which Is Onboard Female Header Such As Unor3board..
2, Support 5V/3.3V Voltage Input, Onboard Rt9161 Power Chip, Lower Voltage Drop Compared With Chip 1117, Faster Load Response Speed, Very Suitable For High-Noise Power Supply Environment..
Features
- 1, Onboard ADXL345 digital output (support I2C/SPI), low power consumption, compact accelerometer.
- 2, Support 5V/3.3V voltage input, onboard RT9161 power chip, lower voltage drop compared with chip 1117, faster load response speed, very suitable for high-noise power supply environment.
- 3, The commonly used pins have been drawn out, and it is soldered with standard 2.54mm pin header, which is convenient for dot matrix boards.
- 4, Prepared 2 cables for this module, Female to Female cable is for ADXL345 with MCU which is onboard male pin header like Raspberry Pi board, while Female to Male cable is for ADXL345 with MCU which is onboard female header such as UNOR3board.
- 5, What you will get is 2pcs ADXL345 Accelerometer module + 1pc 10Pin 2.54mm Female to Female Dupont Cable 20cm + 1pc 10Pin 2.54mm Female to Male Dupont Cable 20cm. 6, If you have any question, please contact us by clicking Wishiot under the shopping cart(you can find Sold by Wishiot under Buy Now button), in the new page, click Ask a question to contact us.
- See more on Amazon...
Brand: Wishiot | Manufacturer: Wishiot
See On Amazon #12
4PCS GY-291 ADXL345 3-Axis Digital Acceleration of Gravity Tilt Sensor Module IIC/SPI Transmission Compatible with Raspberry Pi(Welded)
Asin: B0C7H1KK7K | Ean: 0687117709394 | UPC: 687117709394
Advantages: Save Time And Effort With Pre-Soldered Gy-291 Adxl345 Module. No Need To Learn How To Solder Or Buy Soldering Equipment..
Applications: The Adxl345 Module Is Perfect For Mobile Device Applications. It Measures Static Gravitational Acceleration In Tilt Detection Applications As Well As Dynamic Acceleration Due To Motion Or Impact..
Low-Power Mode Supports Motion-Based Intelligent Power Management For Threshold Sensing And Motion Acceleration Measurement With Very Low Power Consumption..
The Digital Output Data Is In 16-Bit Twos Complement Format And Is Accessible Via Spi (3-Wire Or 4-Wire) Or I2c Digital Interface.Its High Resolution (3.9 Mg / Lsb) Enables Measurement Of Tilt Angle Changes Of Less Than 1.0 °.
Features
- The ADXL345 is a small, thin, ultra-low power 3-axis accelerometer with high resolution (13 bits) and measurement range of 16g.
- The digital output data is in 16-bit twos complement format and is accessible via SPI (3-wire or 4-wire) or I2C digital interface.Its high resolution (3.9 mg / LSB) enables measurement of tilt angle changes of less than 1.0
- Advantages: Save time and effort with Pre-Soldered GY-291 ADXL345 module. No need to learn how to solder or buy soldering equipment.
- Low-power mode supports motion-based intelligent power management for threshold sensing and motion acceleration measurement with very low power consumption.
- Applications: The ADXL345 module is perfect for mobile device applications. It measures static gravitational acceleration in tilt detection applications as well as dynamic acceleration due to motion or impact.
- See more on Amazon...
Brand: AITIAO | Manufacturer: AITIAO
See On Amazon #13
Adafruit (PID 163) ADXL335 - 5V ready triple-axis accelerometer (+-3g analog out)
Asin: B01G61HUPE | Model: LYSB01G61HUPE-ELECTRNCS | PartNumber: LYSB01G61HUPE-ELECTRNCS | Ean: 0717520028819 | UPC: 717520028819
Vcc Takes 5V In And Regulates It To 3.3V.
Some Soldering Required.
Includes Breakout And Headers.
50 Hz Bandwidth.
Features
- ADXL335 Analog Devices MEMS
- 50 Hz bandwidth
- VCC takes 5V in and regulates it to 3.3V
- Includes Breakout and headers
- Some soldering required
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 1.00 x 3.00 x 2.00 inches
See On Amazon #14
WWZMDiB GY-291 ADXL345 Digital 3-Axis Acceleration of Gravity Tilt Module IIC/SPI Transmission for Arduino
Asin: B09YD41VXR | Ean: 0825665533928 | UPC: 825665533928
Brand: Generic | Manufacturer: Generic
See On Amazon #15
EC Buying 3Pcs ADXL345 Digital Accelerometer Module Digital Tilt Sensor Acceleration Module IIC I2C SPI 3-Axis Inclination Tilt Sensor with 10Pin for Arduino Raspberry Pi
Asin: B0CZRKMWJ6
Effortlessly Integrate The Module Into Your Projects With Standard 2.54Mm Pin Headers And Conveniently Exposed Common Pins, Suitable For Use On Prototyping Boards..
Unlock The Potential Of Your Projects With The Precise And Responsive Digital Tilt Sensor Acceleration Module, Offering Accurate And Reliable Data Output For A Wide Range Of Applications..
Benefit From The Durable And High-Quality Construction Of The Double-Sided Gold-Plated Pcb Board, Measuring 28Mm X 14Mm, Ensuring Reliability And Longevity For Your Applications..
Enjoy Versatile Voltage Input Options Of 5V/3.3V And Enhanced Power Efficiency With The Onboard Rt9161 Power Chip, Ensuring Optimal Performance In High-Noise Power Environments..
Features
- ADXL345 digital accelerometer module, featuring IIC/SPI support and low power consumption for efficient 3-axis inclination tilt sensing.
- Enjoy versatile voltage input options of 5V/3.3V and enhanced power efficiency with the onboard RT9161 power chip, ensuring optimal performance in high-noise power environments.
- Effortlessly integrate the module into your projects with standard 2.54mm pin headers and conveniently exposed common pins, suitable for use on prototyping boards.
- Benefit from the durable and high-quality construction of the double-sided gold-plated PCB board, measuring 28mm x 14mm, ensuring reliability and longevity for your applications.
- Unlock the potential of your projects with the precise and responsive digital tilt sensor acceleration module, offering accurate and reliable data output for a wide range of applications.
- See more on Amazon...
Brand: EC Buying | Manufacturer: EC Buying
See On Amazon #16
ATNSINC 10 Pcs GY-291 ADXL345 3-Axis Digital Acceleration of Gravity Tilt Module IIC/SPI Transmission for Arduino (10)
Asin: B0BZ88STVQ | Ean: 0701715491373 | UPC: 701715491373
Low-Power Mode Supports Motion-Based Intelligent Power Management For Threshold Sensing And Motion Acceleration Measurement With Very Low Power Consumption..
Ultra Low Power: As Low As 23 Μa In Measurement Mode And 0.1 Μa In Standby Mode At Vs = 2.5 V (Typical)..
Appliactions: It Can Used In Handsets, Medical Instrumentation, Gaming And Pointing Devices, Industrial Instrumentation, Personal Navigation Devices, Hard Disk Drive (Hdd) Protection, Portable Gaming..
The Adxl345 Is Perfect For Mobile Device Applications. It Measures Static Gravitational Acceleration In Tilt Detection Applications As Well As Dynamic Acceleration Due To Motion Or Impact.Its High Resolution (3.9 Mg / Lsb) Enables Measurement Of Tilt Angle Changes Of Less Than 1.0 °.
Features
- ADXL345 is a small, thin, ultra-low power 3-axis accelerometer with high resolution (13-bit), measurement at up to 16g. Digital output data is 16-bit twos complement format, can be accessed via I2C digital interface or SPI (3-wire or 4-wire).
- The ADXL345 is perfect for mobile device applications. It measures static gravitational acceleration in tilt detection applications as well as dynamic acceleration due to motion or impact.Its high resolution (3.9 mg / LSB) enables measurement of tilt angle changes of less than 1.0
- Low-power mode supports motion-based intelligent power management for threshold sensing and motion acceleration measurement with very low power consumption.
- Appliactions: It can used in Handsets, Medical instrumentation, Gaming and pointing devices, Industrial instrumentation, Personal navigation devices, Hard disk drive (HDD) protection, Portable gaming.
- ULTRA LOW POWER: as low as 23 A in measurement mode and 0.1 A in standby mode at VS = 2.5 V (typical).
- See more on Amazon...
Brand: ATNSINC | Manufacturer: ATNSINC
See On Amazon #17
DiGiYes 2Pcs GY-291 ADXL345 3-Axis Digital Acceleration of Gravity Tilt Inclination Module IIC/SPI Transmission
Asin: B0BPX34P2L
The Adxl345 Is Ideal For Mobile Device Applications. It Can Measure Static Gravitational Acceleration In Tilt Detection Applications, As Well As Dynamic Acceleration Due To Motion Or Impact. Its High Resolution (3.9Mg/Lsb) Enables Measurement Of Tilt Angle Changes Of Less Than 1.0 Degrees..
The Device Provides A Variety Of Special Detection Functions. The Active And Inactive Detection Functions Detect The Occurrence Of Motion By Comparing The Acceleration On Any Axis With A User Set Threshold. The Percussion Detection Function Can Detect Single And Double Vibration In Any Direction. The Free Fall Detection Function Can Detect Whether The Device Is Falling..
The Low Power Mode Enables Smart Motion Based Power Management For Threshold Sensing And Motion Acceleration Measurement With Low Power Consumption..
The Adxl345 Is A Small, Thin, Low Power Consuming 3 Axis Accelerometer With A High Resolution (13 Bits) And A Measurement Range Of -16G - +16G. The Digital Output Data Is In 16-Bit Binary Complement Format And Can Be Accessed Through Spi(3 Wire Or 4 Wire) Or I2c Digital Interfaces..
Features
- Chip Used: ADXL345 (Three Axis Gravitational Acceleration), Communication Method: IIC / SPI Communication Protocol
- The ADXL345 is a small, thin, low power consuming 3 axis accelerometer with a high resolution (13 bits) and a measurement range of -16g - +16g. The digital output data is in 16-bit binary complement format and can be accessed through SPI(3 wire or 4 wire) or I2C digital interfaces.
- The ADXL345 is ideal for mobile device applications. It can measure static gravitational acceleration in tilt detection applications, as well as dynamic acceleration due to motion or impact. Its high resolution (3.9mg/LSB) enables measurement of tilt Angle changes of less than 1.0 Degrees.
- The low power mode enables smart motion based power management for threshold sensing and motion acceleration measurement with low power consumption.
- The device provides a variety of special detection functions. The active and inactive detection functions detect the occurrence of motion by comparing the acceleration on any axis with a user set threshold. The percussion detection function can detect single and double vibration in any direction. The free fall detection function can detect whether the device is falling.
- See more on Amazon...
Brand: DiGiYes | Manufacturer: DiGiYes
Dimensions: 0.23 x 0.82 x 0.59 inches
See On Amazon #18
Alinan 4pcs GY-291 ADXL345 Digital 3-Axis Acceleration of Gravity Tilt Module IIC/SPI Transmission
Asin: B09NN8PWRZ | Ean: 0701715497702 | UPC: 701715497702
【Appliactions】: The Gy-291 Adxl345 Can Used In Handsets, Medical Instrumentation, Gaming And Pointing Devices, Industrial Instrumentation, Personal Navigation Devices, Hard Disk Drive (Hdd) Protection, Portable Gaming.
★Low Power Modes Enable Intelligent Motion-Based Power Management To A Very Low Power Consumption Threshold Sensing And Active Acceleration Measurement. As Low As 23 Μa In Measurement Mode And 0.1 Μa In Standby Mode At Vs = 2.5 V (Typical).
★The Gy-291 Adxl345 Device Offers A Variety Of Special Detection. Activity And Inactivity Sensing Through Comparing Any Axis Acceleration Threshold Set By The User To Detect The Presence Or Absence Of Transport Movable Occurs.Tap Any Direction Sensing Detects Single And Dual Vibration Vibration Make. Free-Fall Detection Can Detect Whether The Device Is Falling. These Ones Function Can Be Mapped To Two Interrupt Output Pins.
★The Adxl345 Is Perfect For Mobile Device Applications.T Can Be Used For Tilt Sensing Applications While Measuring Static Acceleration Of Gravity, And It Can Also Measure The Speed Of Vibration Caused By Dynamic Added Motion Or Caused. Its High Resolution (3.9 Mg / Lsb) Enables Measurement Of Tilt Angle Changes Of Less Than 1.0 °, Use Adxl345 Digital Output Timing Acceleration, Etc.
Features
- The ADXL345 is a small, thin, ultra-low power 3-axis accelerometer Up to 16 g accelerometer with high resolution (13) measurement. Digital outputs according to a 16-bit twos complement format, According to the 16-bit two's complement format, it can be accessed through the digital interface SPI (3-wire or 4-wire) or I2C
- The ADXL345 is perfect for mobile device applications.t can be used for tilt sensing applications while measuring static acceleration of gravity, and it can also measure the speed of vibration caused by dynamic added motion or caused. Its high resolution (3.9 mg / LSB) enables measurement of tilt angle changes of less than 1.0 , Use ADXL345 digital output timing acceleration, etc
- Appliactions : The GY-291 ADXL345 can used in Handsets, Medical instrumentation, Gaming and pointing devices, Industrial instrumentation, Personal navigation devices, Hard disk drive (HDD) protection, Portable gaming
- The gy-291 ADXL345 device offers a variety of special detection. Activity and inactivity sensing through comparing any axis acceleration threshold set by the user to detect the presence or absence of transport movable occurs.Tap any direction sensing detects single and dual vibration vibration make. Free-fall detection can detect whether the device is falling. These ones function can be mapped to two interrupt output pins
- Low power modes enable intelligent motion-based power management to a very low power consumption threshold sensing and active acceleration measurement. as low as 23 A in measurement mode and 0.1 A in standby mode at VS = 2.5 V (typical)
- See more on Amazon...
Brand: Alinan | Manufacturer: Alinan
See On Amazon #19
ACEIRMC 10pcs GY-291 ADXL345 3-Axis Digital Acceleration of Gravity Tilt Module for Arduino IIC/SPI Transmission
Asin: B09SD1WBTZ | Ean: 0701715446625 | UPC: 701715446625
Low-Power Mode Supports Motion-Based Intelligent Power Management For Threshold Sensing And Motion Acceleration Measurement With Very Low Power Consumption..
The Adxl345 Is Perfect For Mobile Device Applications. It Measures Static Gravitational Acceleration In Tilt Detection Applications As Well As Dynamic Acceleration Due To Motion Or Impact..
Its High Resolution (3.9 Mg / Lsb) Enables Measurement Of Tilt Angle Changes Of Less Than 1.0 °.
The Digital Output Data Is In 16-Bit Twos Complement Format And Is Accessible Via Spi (3-Wire Or 4-Wire) Or I2c Digital Interface..
Features
- The ADXL345 is a small, thin, ultra-low power 3-axis accelerometer with high resolution (13 bits) and measurement range of 16g.
- The digital output data is in 16-bit twos complement format and is accessible via SPI (3-wire or 4-wire) or I2C digital interface.
- Low-power mode supports motion-based intelligent power management for threshold sensing and motion acceleration measurement with very low power consumption.
- Its high resolution (3.9 mg / LSB) enables measurement of tilt angle changes of less than 1.0
- The ADXL345 is perfect for mobile device applications. It measures static gravitational acceleration in tilt detection applications as well as dynamic acceleration due to motion or impact.
- See more on Amazon...
Brand: ACEIRMC | Manufacturer: ACEIRMC
See On Amazon
Looking For Something Else?
Search