Leecraft BH-2 Zero Clearance Dado Insert for 4000 and 4100 Table Saw
Asin: B0077LMNG4 | Model: BH-2 | PartNumber: BH-2 | Ean: 0670218970022 | UPC: 670218970022
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Fits 4100/4000 Series Jobsite Table Saws 13-9/16" X 3-3/4" X 7/16" Thick W/O Riving Knife Slot.
Precision Machined From Melamine Faced, High-Density Phenolic Laminate.
Leecraft Model #Bh-2.
Features
- Installation instructions included
- Leecraft Model #BH-2
- Fits 4100/4000 series jobsite table saws 13-9/16 x 3-3/4 x 7/16 thick w/o riving knife slot
- Precision machined from melamine faced, high-density phenolic laminate
- See more on Amazon...
Brand: Leecraft | Manufacturer: Leecraft
Dimensions: 0.95 x 13.80 x 4.85 inches
See On Amazon Similar To Leecraft BH2 Zero Clearance Dado
#1
Leecraft DW-3 Zero-Clearance Dado Table Saw Insert for Dewalt Saws (Colors May Vary)
Asin: B0794FMX21 | Model: DW-3 | PartNumber: DW-3 | Ean: 0670218956033 | UPC: 670218956033
Offers Superior Rigidity, Flatness, Durability, And Low Friction; Reduces Chip-Out And Splintering.
Factory Splitter/Guard Incompatible With Dw-3 Insert And Will Need To Be Lowered Or Removed.
Measures: 13-9/16" X 3-3/4" X 29/64" (Please Measure Before Ordering) Instructions Included.
Insert Is Cut With Dado Blade Or Regular Blade To Create A Perfectly Matched Insert..
Features
- Fits DeWalt: DW744, DW745, DW746, DeWalt, DWE7480, DWE7490X, DWE7491RS, DWE7499GD Table Saws
- Insert is cut with dado blade or regular blade to create a perfectly matched insert.
- Offers superior rigidity, flatness, durability, and low friction; reduces chip-out and splintering
- Measures: 13-9/16 x 3-3/4 x 29/64 (Please measure before ordering) instructions included
- Factory splitter/guard incompatible with DW-3 insert and will need to be lowered or removed
- See more on Amazon...
Brand: Leecraft | Manufacturer: Leecraft
Dimensions: 3.00 x 16.00 x 3.00 inches | Weight: 1.05 pounds
See On Amazon #2
Leecraft Craftsman 21833 Table Saw Zero-Clearance Insert CR-4
Asin: B0083SH63A | Model: 21833 | PartNumber: 21833 | Ean: 0670218952042 | UPC: 670218952042
15-1/8" X 4" X 1/8" Thick With Pre-Milled Blade, Dado And Riving Knife Slot.
Installation Instructions Included.
Precision Machined From Melamine Faced High Density Phenolic Laminate.
Fits Craftsman 21833, Grizzly G0715p, Dayton 4Kxd1, Masterforce 240-0036 Table Saws.
Features
- LEECRAFT Model Number CR-4
- Fits Craftsman 21833, Grizzly G0715P, Dayton 4KXD1, Masterforce 240-0036 table saws
- 15-1/8 x 4 x 1/8 thick with pre-milled blade, dado and riving knife slot
- Precision machined from melamine faced high density phenolic laminate
- Installation instructions included
- See more on Amazon...
Brand: Leecraft | Manufacturer: Leecraft
Dimensions: 1.05 x 15.15 x 4.20 inches | Weight: 1.24 pounds
See On Amazon #3
Leecraft DW-2 Zero-Clearance Table Saw Insert for DeWalt Model DW744 and DW746
Asin: B0000223V9 | Model: DW-2 | PartNumber: DW-2 | Ean: 5448095825835, 0670218956026 | UPC: 670218956026
Constructed Of High-Density Phenolic Laminate With A Bonded-Melamine Surface.
Measures 13-5/8-By-3-3/4 Inches (Lxw).
User-Friendly With Leveling And Lateral Adjustment Screws, Rear Anti-Life Pin, And Precut Blade Bottom Pocket.
Significantly Reduces Saw Noise, Dust, Chip-Out, And Splintering.
Features
- Table saw insert for eWalt DW744 and DW746
- Significantly reduces saw noise, dust, chip-out, and splintering
- Constructed of high-density phenolic laminate with a bonded-melamine surface
- User-friendly with leveling and lateral adjustment screws, rear anti-life pin, and precut blade bottom pocket
- Measures 13-5/8-by-3-3/4 inches (LxW)
- See more on Amazon...
Brand: Leecraft | Manufacturer: Leecraft
Dimensions: 13.85 x 4.35 x 13.85 inches | Weight: 1.16 Pounds
See On Amazon #4
Leecraft CR-1 Zero Clearance Table Saw Insert (For Craftsman/Sears)(Colors May Vary)
Asin: B0000DD1BJ | Model: CR-1 | PartNumber: CR-1 | Ean: 0670218952011, 5448095793660, 0733353712008, 5915903643306 | UPC: 670218952011, 733353712008
Measures: 14" X 3-3/4" X 3/16" (Please Measure Before Ordering).
Please Note: Cr-1 Does Not Fit Models Ts2400ls, Ts2400-1 Or The New Ts2410 (See Rg-2).
Offers Superior Rigidity, Flatness, Durability, And Low Friction; Reduces Chip-Out And Splintering.
Fits: Sears Craftsman 10" Belt-Drive Models 1977 To Mid 2004 (Check Size, See Dl-1U), Ridgid Ts2412, Ts2424, Ts2400.
Features
- Elimantes dangerous gap around blade where thin off-cuts can get wedged
- Fits: Sears Craftsman 10 belt-drive models 1977 to mid 2004 (check size, see DL-1U), RIDGID TS2412, TS2424, TS2400
- Measures: 14 x 3-3/4 x 3/16 (PLEASE MEASURE before ORDERING)
- Offers superior rigidity, flatness, durability, and low friction; reduces chip-out and splintering
- PLEASE NOTE: CR-1 does not fit models TS2400LS, TS2400-1 or the new TS2410 (See RG-2)
- See more on Amazon...
Brand: Leecraft | Manufacturer: Leecraft
Dimensions: 0.70 x 3.75 x 14.35 Inches | Weight: 1.01 pounds
See On Amazon #5
Leecraft CR-2 Sears Older 10-Inch Belt-drive Zero Clearance Table Saw Insert (Colors may vary)
Asin: B0002898B2 | Model: CR-2 | PartNumber: CR-2 | Ean: 0670218952028 | UPC: 670218952028
Elimantes Dangerous Gap Around Blade Where Thin Off-Cuts Can Get Wedged.
Greatly Reduced Chip-Out And Splintering.
Features
- Supports work right up to the blade
- Greatly reduced chip-out and splintering
- Elimantes dangerous gap around blade where thin off-cuts can get wedged
- See more on Amazon...
Brand: Leecraft | Manufacturer: Leecraft
Dimensions: 1.00 x 14.00 x 4.00 inches | Weight: 1.20 Pounds
See On Amazon #6
Leecraft DL-2 Zero Clearance Table Saw Insert (For Delta Model 10 Bench Saw), Colors May Vary
Asin: B0000223V8 | Model: DL-2 | PartNumber: DL-2 | Ean: 0670218951038 | UPC: 670218951038
Reduces Sawdust Expelled From Table Top.
Reduces Saw Noise.
Kerf Serves As Handy Stock Alignment Guide.
Reduced Chip-Out And Splintering.
Features
- Supports work right up to the blade
- Reduced chip-out and splintering
- Reduces sawdust expelled from table top
- Kerf serves as handy stock alignment guide
- Reduces saw noise
- See more on Amazon...
Brand: Leecraft | Manufacturer: Leecraft
Weight: 0.90 pounds
See On Amazon #7
LEECRAFT Zero-Clearance Dado Insert For New DELTA UNISAW 2009 And Later
Asin: B004DIIMBE | Ean: 0670218951076 | UPC: 670218951076
14-1/2" Long X 5" Wide X 1/2" Thick.
Includes Leveling Screws And Installation Instructions.
High Density Phenolic Laminate With Frictionless Coating.
Features A Milled 1" Wide Blind Dado Pocket On The Bottom Of Insert.
Features
- Zero-clearance dado insert fits new DELTA UNISAW 2009 and later
- Features a milled 1 wide blind dado pocket on the bottom of insert
- 14-1/2 long x 5 wide x 1/2 thick
- High density phenolic laminate with frictionless coating
- Includes leveling screws and installation instructions
- See more on Amazon...
Brand: Leecraft | Manufacturer: Leecraft
Dimensions: 1.05 x 5.75 x 15.25 inches | Weight: 0.85 Pounds
See On Amazon
Looking For Something Else?
Search