Leecraft DW-3 Zero-Clearance Dado Table Saw Insert for Dewalt Saws (Colors May Vary)
Asin: B0794FMX21 | Model: DW-3 | PartNumber: DW-3 | Ean: 0670218956033 | UPC: 670218956033
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Offers Superior Rigidity, Flatness, Durability, And Low Friction; Reduces Chip-Out And Splintering.
Factory Splitter/Guard Incompatible With Dw-3 Insert And Will Need To Be Lowered Or Removed.
Measures: 13-9/16" X 3-3/4" X 29/64" (Please Measure Before Ordering) Instructions Included.
Insert Is Cut With Dado Blade Or Regular Blade To Create A Perfectly Matched Insert..
Features
- Fits DeWalt: DW744, DW745, DW746, DeWalt, DWE7480, DWE7490X, DWE7491RS, DWE7499GD Table Saws
- Insert is cut with dado blade or regular blade to create a perfectly matched insert.
- Offers superior rigidity, flatness, durability, and low friction; reduces chip-out and splintering
- Measures: 13-9/16 x 3-3/4 x 29/64 (Please measure before ordering) instructions included
- Factory splitter/guard incompatible with DW-3 insert and will need to be lowered or removed
- See more on Amazon...
Brand: Leecraft | Manufacturer: Leecraft
Dimensions: 3.00 x 16.00 x 3.00 inches | Weight: 1.05 pounds
See On Amazon Similar To Leecraft DW3 ZeroClearance Dado Table
#1
Leecraft DL-1U Zero Clearance Table Saw Insert for Delta Table Saw (Colors may Vary)
Asin: B0000223VB | Model: DL-1U | PartNumber: DL-1U | Ean: 0670218951021, 5915903643221, 0767615491417, 0733353981237 | UPC: 733353981237, 767615491417, 670218951021
Offers Superior Rigidity, Flatness, Durability, And Low Friction; Reduces Chip-Out And Splintering.
Includes Leveling Screws, Side And End Adjustment Screws; Rear Safety Pin; Precut Blade Bottom Pocket For Fully Retracted Blades And Bevel Cuts.
Elimantes Dangerous Gap Around Blade Where Thin Off-Cuts Can Get Wedged.
Measures: 13-3/8" X 3-3/4" X 1/2" (Please Measure Before Ordering).
Features
- Fits: Delta: Unisaw & LEFT-TILT UNISAW, 10" Contractor,10" Tilt Arbor Saw, "Hybrid" & Left-Tilt Contractor, Grizzly G1023, Jet CTAS-10, Powermatic 63, Sears Craftsman 22104, 22114, 22124, Bridgewood BW10TS, Steel City 35605, 35610, 35670, 35675, 35680, 35685
- Measures: 13-3/8 x 3-3/4 x 1/2 (Please measure before ordering)
- Offers superior rigidity, flatness, durability, and low friction; reduces chip-out and splintering
- Elimantes dangerous gap around blade where thin off-cuts can get wedged
- Includes leveling screws, side and end adjustment screws; rear safety pin; precut blade bottom pocket for fully retracted blades and bevel cuts
- See more on Amazon...
Brand: Leecraft | Manufacturer: Leecraft
Dimensions: 3.00 x 8.00 x 3.00 inches
See On Amazon #2
Leecraft DW-4Y Zero-Clearance Insert is Compatible with Dewalt Sliding Compound Miter Saws DHS780, DHS790, DWS779, DWS780 and DWS782 (Color - Yellow)
Asin: B0BNP39P39 | Ean: 0670218956057 | UPC: 670218956057
Offers Superior Rigidity, Flatness, Durability, And Low Friction; Reduces Chip-Out And Splintering.
Dimensions: 17 3/8" X 3 1/4" X 3/8".
Made From High-Density Phenolic Laminate With A Bonded-Melamine Surface.
Miter Saw Insert Supports Work Right Up To The Blade For Smooth, More Precise Cuts.
Features
- Leecraft model DW-4 fits is compatible with DeWalt sliding miter saws: DHS790, DWS779, DWS780 and DWS782
- Miter saw insert supports work right up to the blade for smooth, more precise cuts
- Offers superior rigidity, flatness, durability, and low friction; reduces chip-out and splintering
- Made from high-density phenolic laminate with a bonded-melamine surface
- Dimensions: 17 3/8 x 3 1/4 x 3/8
- See more on Amazon...
Brand: Leecraft | Manufacturer: Leecraft
See On Amazon #3
LEECRAFT RIDGID R4512 Table Saw Zero-Clearance Blade Insert
Asin: B0057EANZ6 | Model: . | PartNumber: . | Ean: 0670218957054, 5915903643276 | UPC: 670218957054
Zero-Clearance Blade Insert With Riving Knife Slot.
Coated Surface For Friction Free Operation.
Durable Phelnolic Construction.
Fits Ridgid R4512 Professional Table Saw.
Features
- 15-1/8" x 3-3/4" x 1/8"
- Fits RIDGID R4512 Professional Table Saw
- Zero-Clearance blade insert with riving knife slot
- Durable phelnolic construction
- Coated surface for friction free operation
- See more on Amazon...
Brand: Leecraft | Manufacturer: Leecraft
Dimensions: 0.90 x 15.25 x 3.75 inches | Weight: 1.09 Pounds
See On Amazon #4
LEECRAFT RIDGID R4512 Table Saw Zero-Clearance Dado Insert
Asin: B0057EAOQO | Model: . | PartNumber: . | Ean: 0670218957061, 5915903643269 | UPC: 670218957061
Zero-Clearance Dado Insert With No Riving Knife Slot.
Coated Surface For Friction Free Operation.
Durable Phenolic Construction.
Fits Ridgid R4512 Professional Table Saw.
Features
- 15-1/8" x 3-3/4" x 1/8"
- Fits RIDGID R4512 Professional Table Saw
- Zero-Clearance dado insert with no riving knife slot
- Durable phenolic construction
- Coated surface for friction free operation
- See more on Amazon...
Brand: Leecraft | Manufacturer: Leecraft
Dimensions: 1.10 x 15.50 x 4.70 inches | Weight: 1.04 pounds
See On Amazon #5
Leecraft Craftsman 21833 Table Saw Zero-Clearance Insert CR-4
Asin: B0083SH63A | Model: 21833 | PartNumber: 21833 | Ean: 0670218952042 | UPC: 670218952042
15-1/8" X 4" X 1/8" Thick With Pre-Milled Blade, Dado And Riving Knife Slot.
Installation Instructions Included.
Precision Machined From Melamine Faced High Density Phenolic Laminate.
Fits Craftsman 21833, Grizzly G0715p, Dayton 4Kxd1, Masterforce 240-0036 Table Saws.
Features
- LEECRAFT Model Number CR-4
- Fits Craftsman 21833, Grizzly G0715P, Dayton 4KXD1, Masterforce 240-0036 table saws
- 15-1/8 x 4 x 1/8 thick with pre-milled blade, dado and riving knife slot
- Precision machined from melamine faced high density phenolic laminate
- Installation instructions included
- See more on Amazon...
Brand: Leecraft | Manufacturer: Leecraft
Dimensions: 1.05 x 15.15 x 4.20 inches | Weight: 1.24 pounds
See On Amazon #6
Leecraft BH-2 Zero Clearance Dado Insert for 4000 and 4100 Table Saw
Asin: B0077LMNG4 | Model: BH-2 | PartNumber: BH-2 | Ean: 0670218970022 | UPC: 670218970022
Fits 4100/4000 Series Jobsite Table Saws 13-9/16" X 3-3/4" X 7/16" Thick W/O Riving Knife Slot.
Precision Machined From Melamine Faced, High-Density Phenolic Laminate.
Leecraft Model #Bh-2.
Features
- Installation instructions included
- Leecraft Model #BH-2
- Fits 4100/4000 series jobsite table saws 13-9/16 x 3-3/4 x 7/16 thick w/o riving knife slot
- Precision machined from melamine faced, high-density phenolic laminate
- See more on Amazon...
Brand: Leecraft | Manufacturer: Leecraft
Dimensions: 0.95 x 13.80 x 4.85 inches
See On Amazon #7
Leecraft PM-6 Zero Clearance Table Saw Insert for Powermatic PM2000 Table Saw (Colors may Vary)
Asin: B001CH08IE | Ean: 0670218954060 | UPC: 670218954060
Eliminates Dangerous Gap Around Blade Where Thin Off-Cuts Can Get Wedged.
Installation Instructions Included.
Offers Superior Rigidity, Flatness, Durability, And Low Friction; Reduces Chip-Out And Splintering.
Features
- Measures: 17-7/8" x 4-1/4" x 15/32" - 3/8" (Please measure before ordering)
- Offers superior rigidity, flatness, durability, and low friction; reduces chip-out and splintering
- Eliminates dangerous gap around blade where thin off-cuts can get wedged
- Installation instructions included
- See more on Amazon...
Brand: Leecraft | Manufacturer: Leecraft
Dimensions: 1.20 x 4.75 x 17.90 inches
See On Amazon #8
Leecraft DW-2 Zero-Clearance Table Saw Insert for DeWalt Model DW744 and DW746
Asin: B0000223V9 | Model: DW-2 | PartNumber: DW-2 | Ean: 5448095825835, 0670218956026 | UPC: 670218956026
Constructed Of High-Density Phenolic Laminate With A Bonded-Melamine Surface.
Measures 13-5/8-By-3-3/4 Inches (Lxw).
User-Friendly With Leveling And Lateral Adjustment Screws, Rear Anti-Life Pin, And Precut Blade Bottom Pocket.
Significantly Reduces Saw Noise, Dust, Chip-Out, And Splintering.
Features
- Table saw insert for eWalt DW744 and DW746
- Significantly reduces saw noise, dust, chip-out, and splintering
- Constructed of high-density phenolic laminate with a bonded-melamine surface
- User-friendly with leveling and lateral adjustment screws, rear anti-life pin, and precut blade bottom pocket
- Measures 13-5/8-by-3-3/4 inches (LxW)
- See more on Amazon...
Brand: Leecraft | Manufacturer: Leecraft
Dimensions: 13.85 x 4.35 x 13.85 inches | Weight: 1.16 Pounds
See On Amazon #9
Leecraft CR-1 Zero Clearance Table Saw Insert (For Craftsman/Sears)(Colors May Vary)
Asin: B0000DD1BJ | Model: CR-1 | PartNumber: CR-1 | Ean: 0670218952011, 5448095793660, 0733353712008, 5915903643306 | UPC: 670218952011, 733353712008
Measures: 14" X 3-3/4" X 3/16" (Please Measure Before Ordering).
Please Note: Cr-1 Does Not Fit Models Ts2400ls, Ts2400-1 Or The New Ts2410 (See Rg-2).
Offers Superior Rigidity, Flatness, Durability, And Low Friction; Reduces Chip-Out And Splintering.
Fits: Sears Craftsman 10" Belt-Drive Models 1977 To Mid 2004 (Check Size, See Dl-1U), Ridgid Ts2412, Ts2424, Ts2400.
Features
- Elimantes dangerous gap around blade where thin off-cuts can get wedged
- Fits: Sears Craftsman 10 belt-drive models 1977 to mid 2004 (check size, see DL-1U), RIDGID TS2412, TS2424, TS2400
- Measures: 14 x 3-3/4 x 3/16 (PLEASE MEASURE before ORDERING)
- Offers superior rigidity, flatness, durability, and low friction; reduces chip-out and splintering
- PLEASE NOTE: CR-1 does not fit models TS2400LS, TS2400-1 or the new TS2410 (See RG-2)
- See more on Amazon...
Brand: Leecraft | Manufacturer: Leecraft
Dimensions: 0.70 x 3.75 x 14.35 Inches | Weight: 1.01 pounds
See On Amazon #10
Leecraft DW-1 Zero-Clearance Insert for Dewalt Fixed Miter Saws (Colors May Vary)
Asin: B01HFCMRXS | Model: DW-1 | PartNumber: DW-1 | Ean: 0670218956019 | UPC: 670218956019
Dimensions: 10" X 2-5/8" X 1/4".
Zero Clearance Blade Insert With Durable Phenolic Construction.
Coated Surface For Friction Free Operation.
Features
- Fits DeWalt 10" and 12" miter saws
- Coated surface for friction free operation
- Dimensions: 10 x 2-5/8 x 1/4
- Zero clearance blade insert with durable phenolic construction
- See more on Amazon...
Brand: Leecraft | Manufacturer: Leecraft
Dimensions: 2.00 x 10.00 x 5.00 Inches | Weight: 0.02 Pounds
See On Amazon #11
Leecraft CR-3 Sears Vintage 10-Inch Belt-drive Zero Clearance Table Saw Insert
Asin: B0002898BW | Model: CR-3 | PartNumber: CR-3 | Ean: 0670218952035 | UPC: 670218952035
Elimantes Dangerous Gap Around Blade Where Thin Off-Cuts Can Get Wedged.
Greatly Reduced Chip-Out And Splintering.
Features
- Supports work right up to the blade
- Greatly reduced chip-out and splintering
- Elimantes dangerous gap around blade where thin off-cuts can get wedged
- See more on Amazon...
Brand: Leecraft | Manufacturer: Leecraft
Dimensions: 1.00 x 14.00 x 4.00 inches | Weight: 0.95 Pounds
See On Amazon #12
Leecraft CR-2 Sears Older 10-Inch Belt-drive Zero Clearance Table Saw Insert (Colors may vary)
Asin: B0002898B2 | Model: CR-2 | PartNumber: CR-2 | Ean: 0670218952028 | UPC: 670218952028
Elimantes Dangerous Gap Around Blade Where Thin Off-Cuts Can Get Wedged.
Greatly Reduced Chip-Out And Splintering.
Features
- Supports work right up to the blade
- Greatly reduced chip-out and splintering
- Elimantes dangerous gap around blade where thin off-cuts can get wedged
- See more on Amazon...
Brand: Leecraft | Manufacturer: Leecraft
Dimensions: 1.00 x 14.00 x 4.00 inches | Weight: 1.20 Pounds
See On Amazon #13
Leecraft JT-7 Zero Clearance Table Saw Insert (For Jet/Laguana)(Colors May Vary)
Asin: B010L6JT90 | Model: JT-7 | PartNumber: JT-7 | Ean: 0082045098921 | UPC: 082045098921
Offers Superior Rigidity, Flatness, Durability, And Low Friction; Reduces Chip-Out And Splintering.
Installation Instructions Included.
Eliminates Dangerous Gap Around Blade Where Thin Off-Cuts Can Get Wedged.
Measures: 14" X 4-1/8" X (Please Measure Before Ordering).
Features
- Fits: Jet ProShop Saw: JPS-10TS, 708490, 708491, 708493, 708494, 708495, Laguna Fusion 1.75hp 10" Table Saw, Baleigh TS-1044H, General International 50-090R M1
- Measures: 14 x 4-1/8 x (Please measure before ordering)
- Offers superior rigidity, flatness, durability, and low friction; reduces chip-out and splintering
- Eliminates dangerous gap around blade where thin off-cuts can get wedged
- Installation instructions included
- See more on Amazon...
Brand: Leecraft | Manufacturer: Leecraft
Dimensions: 0.50 x 14.00 x 4.00 inches | Weight: 1.20 pounds
See On Amazon #14
ZERO CLEARANCE DEWALT COMPATIBLE TABLE SAW PLATES SET OF 4 Yellow
Asin: B09NC4BG2N | Model: 001 | PartNumber: 001 | Ean: 0712375665721 | UPC: 712375665721
Do Not Purchase For Model 7845.
Color May Vary.
Set Screws Included.
Features
- HIGH DENSITY MDF, PAINTED
- SET SCREWS INCLUDED
- DO NOT PURCHASE FOR MODEL 7845
- COLOR MAY VARY
- See more on Amazon...
Brand: Generic | Manufacturer: SPLASH CARPENTRY
See On Amazon #15
Leecraft Zero Clearance Table Saw Insert For Jet Deluxe Xacta Table Saw
Asin: B0036AWVDU | Model: . | PartNumber: . | Ean: 0670218953070 | UPC: 670218953070
Eliminates Dangerous Gap Around Blade Where Thin Off-Cuts Can Get Wedged.
Installation Instructions Included.
Offers Superior Rigidity, Flatness, Durability, And Low Friction; Reduces Chip-Out And Splintering.
Features
- Fits: Jet DELUXE Xacta SAW (only Deluxe model), Powermatic PM1000
- Offers superior rigidity, flatness, durability, and low friction; reduces chip-out and splintering
- Eliminates dangerous gap around blade where thin off-cuts can get wedged
- Installation instructions included
- See more on Amazon...
Brand: Leecraft | Manufacturer: Leecraft Inc
Dimensions: 0.50 x 15.55 x 4.80 inches
See On Amazon #16
Leecraft DL-2 Zero Clearance Table Saw Insert (For Delta Model 10 Bench Saw), Colors May Vary
Asin: B0000223V8 | Model: DL-2 | PartNumber: DL-2 | Ean: 0670218951038 | UPC: 670218951038
Reduces Sawdust Expelled From Table Top.
Reduces Saw Noise.
Kerf Serves As Handy Stock Alignment Guide.
Reduced Chip-Out And Splintering.
Features
- Supports work right up to the blade
- Reduced chip-out and splintering
- Reduces sawdust expelled from table top
- Kerf serves as handy stock alignment guide
- Reduces saw noise
- See more on Amazon...
Brand: Leecraft | Manufacturer: Leecraft
Weight: 0.90 pounds
See On Amazon #17
LEECRAFT Zero-Clearance Dado Insert For New DELTA UNISAW 2009 And Later
Asin: B004DIIMBE | Ean: 0670218951076 | UPC: 670218951076
14-1/2" Long X 5" Wide X 1/2" Thick.
Includes Leveling Screws And Installation Instructions.
High Density Phenolic Laminate With Frictionless Coating.
Features A Milled 1" Wide Blind Dado Pocket On The Bottom Of Insert.
Features
- Zero-clearance dado insert fits new DELTA UNISAW 2009 and later
- Features a milled 1 wide blind dado pocket on the bottom of insert
- 14-1/2 long x 5 wide x 1/2 thick
- High density phenolic laminate with frictionless coating
- Includes leveling screws and installation instructions
- See more on Amazon...
Brand: Leecraft | Manufacturer: Leecraft
Dimensions: 1.05 x 5.75 x 15.25 inches | Weight: 0.85 Pounds
See On Amazon #18
Leecraft JT-SS Jet Supersaw Zero Clearance Table Saw Insert
Asin: B0002897MW | Model: JT-SS | PartNumber: JT-SS | Ean: 0670218953049 | UPC: 670218953049
Elimantes Dangerous Gap Around Blade Where Thin Off-Cuts Can Get Wedged.
Greatly Reduced Chip-Out And Splintering.
Features
- Supports work right up to the blade
- Greatly reduced chip-out and splintering
- Elimantes dangerous gap around blade where thin off-cuts can get wedged
- See more on Amazon...
Brand: Leecraft | Manufacturer: Leecraft
Dimensions: 1.00 x 13.00 x 4.00 inches | Weight: 1.00 pounds
See On Amazon #19
Leecraft GE-1 General 350/650 Zero Clearance Table Saw Insert
Asin: B0002898AS | Model: GE-1 | PartNumber: GE-1 | Ean: 0670218955012 | UPC: 670218955012
Elimantes Dangerous Gap Around Blade Where Thin Off-Cuts Can Get Wedged.
Greatly Reduced Chip-Out And Splintering.
Features
- Supports work right up to the blade
- Greatly reduced chip-out and splintering
- Elimantes dangerous gap around blade where thin off-cuts can get wedged
- See more on Amazon...
Brand: Leecraft | Manufacturer: Leecraft
Dimensions: 1.00 x 14.00 x 4.00 inches
See On Amazon
Looking For Something Else?
Search