YG-1 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 3" Overall Length, 0.125" Cutting Diameter, 0.125" Shank Diameter
Asin: B0080C5B72 | Model: 55558 | PartNumber: 55558
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Four Flutes Produce A Better Finish Than Fewer Flutes.
Uncoated (Bright) Tools Have No Additional Surface Treatment Or Coating For Use On A Broad Range Of Materials.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Extra-Long-Length End Mills Have Longer Cutting Edges And Can Make Deeper Cuts Than Long-Length End Mills.
Features
- Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
- Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
- Four flutes produce a better finish than fewer flutes
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon Similar To YG1 E5065 Carbide Square Nose
#1
YG-1 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 4" Overall Length, 0.1875" Cutting Diameter, 0.1875" Shank Diameter
Asin: B0080C5MJ4 | Model: 55904 | PartNumber: 55904 | Ean: 0200000559045 | UPC: 200000559045
Four Flutes Produce A Better Finish Than Fewer Flutes.
Uncoated (Bright) Tools Have No Additional Surface Treatment Or Coating For Use On A Broad Range Of Materials.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Extra-Long-Length End Mills Have Longer Cutting Edges And Can Make Deeper Cuts Than Long-Length End Mills.
Features
- Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
- Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
- Four flutes produce a better finish than fewer flutes
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Dimensions: 0.39 x 5.51 x 0.39 inches | Weight: 0.04 pounds
See On Amazon #2
YG-1 - 55901 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 6" Overall Length, 0.25" Cutting Diameter, 0.25" Shank Diameter
Asin: B0080C5KLO | Model: 55901 | PartNumber: 55901 | Ean: 0760178591136, 0200000559014, 0760178591143, 0760178591150 | UPC: 760178591150, 760178591136, 760178591143, 200000559014
Four Flutes Produce A Better Finish Than Fewer Flutes.
Uncoated (Bright) Tools Have No Additional Surface Treatment Or Coating For Use On A Broad Range Of Materials.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Extra-Long-Length End Mills Have Longer Cutting Edges And Can Make Deeper Cuts Than Long-Length End Mills.
Features
- Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
- Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
- Four flutes produce a better finish than fewer flutes
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Dimensions: 0.39 x 5.12 x 0.39 inches | Weight: 0.02 pounds
See On Amazon #3
YG-1 E5065 Carbide Square Nose End Mill, Extra Long Reach, TIALN Multilayer Finish, 30 Deg Helix, 4 Flutes, 4" Overall Length, 0.25" Cutting Diameter, 0.25" Shank Diameter
Asin: B0080C5Q7C | Model: 55573TF | PartNumber: 55573TF
Four Flutes Produce A Better Finish Than Fewer Flutes.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Titanium Aluminum Nitride (Tialn) Coating Lubricates The End Mill For High-Temperature Stability And Abrasion Resistance At High Cutting Speeds, Offering Better Heat Resistance Than Uncoated Finish, Tin Coating, And Ticn Coating.
Extra-Long-Length End Mills Have Longer Cutting Edges And Can Make Deeper Cuts Than Long-Length End Mills.
Features
- Suitable for machining on steel, chromium-nickel steel, and cast iron
- Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
- Four flutes produce a better finish than fewer flutes
- Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than uncoated finish, TiN coating, and TiCN coating
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.10 pounds
See On Amazon #4
YG-1 E1071 High Speed Steel (HSS) Square Nose End Mill, Long Reach, Weldon Shank, Uncoated (Bright) Finish, 42 Deg Helix, 2 Flutes, 3.0625" Overall Length, 0.25" Cutting Diameter, 0.375" Shank Diameter
Asin: B0080CZUU0 | Model: 18047 | PartNumber: 18047 | Ean: 0733438180470 | UPC: 733438180470
Long-Length End Mills Have Longer Cutting Edges And Can Make Deeper Cuts Than Standard-Length End Mills.
High-Speed Steel For General-Purpose Cutting.
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
42-Degree Helix Provides Increased Cutting Action Compared To End Mills With Lower Helix Angles.
Features
- Suitable for machining on aluminum and other nonferrous materials
- 42-degree helix provides increased cutting action compared to end mills with lower helix angles
- Long-length end mills have longer cutting edges and can make deeper cuts than standard-length end mills
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- High-speed steel for general-purpose cutting
- See more on Amazon...
First Available: 12/12/2017
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.10 pounds
See On Amazon #5
YG-1 - 2558 E5011 Carbide Square Nose End Mill, Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 2.25" Overall Length, 0.125" Cutting Diameter, 0.125" Shank Diameter
Asin: B0080CPUIW | Model: 02558 | PartNumber: 02558
Long-Length End Mills Have Longer Cutting Edges And Can Make Deeper Cuts Than Standard-Length End Mills.
Uncoated (Bright) Tools Have No Additional Surface Treatment Or Coating For Use On A Broad Range Of Materials.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
Features
- Suitable for general-purpose machining on hardened and high-alloy steel, chromium-nickel steel, steel casting, malleable cast iron, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Long-length end mills have longer cutting edges and can make deeper cuts than standard-length end mills
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.05 pounds
See On Amazon #6
YG-1 - 19087 E1072 High Speed Steel (HSS) Square Nose End Mill, Extra Long Reach, Weldon Shank, Uncoated (Bright) Finish, 42 Deg Helix, 2 Flutes, 6.125" Overall Length, 0.625" Cutting Diameter, 0.625" Shank Diameter
Asin: B0080CXWKA | Model: 19087 | PartNumber: 19087 | Ean: 0733438190875 | UPC: 733438190875
Extra-Long-Length End Mills Have Longer Cutting Edges And Can Make Deeper Cuts Than Long-Length End Mills.
High-Speed Steel For General-Purpose Cutting.
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
42-Degree Helix Provides Increased Cutting Action Compared To End Mills With Lower Helix Angles.
Features
- Suitable for machining on aluminum and other nonferrous materials
- 42-degree helix provides increased cutting action compared to end mills with lower helix angles
- Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- High-speed steel for general-purpose cutting
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.65 pounds
See On Amazon #7
Drill America DEWC-5C6 5/16" C6 Carbide Tipped Square Nose Toolbit, Dew Series
Asin: B0771FDZPV | Model: DEWC-5C6 | PartNumber: DEWC-5C6 | Ean: 0887861167222 | UPC: 887861167222
Dew Series.
Qualtech Brand.
First Available: 10/30/2017
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches | Weight: 2.00 pounds
See On Amazon #8
YG-1 E5977 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, Finishing Cut, Non-Center Cutting, 37 Deg Helix, 3 Flutes, 4" Overall Length, 0.25" Cutting Diameter, 0.25" Shank Diameter
Asin: B0080CKBEA | Model: 40573 | PartNumber: 40573
37-Degree Helix Angle Provides Increased Cutting Action And Chip Evacuation Compared To The Standard 30-Degree Helix.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Three Flutes Provide Better Chip-Carrying Capacity Than Four Flutes And A Finer Finish Than Two, Reducing The Need For A Second Finishing Cut In Some Applications.
Extended-Reach Neck Style Provides Access To Recessed Areas Of The Workpiece.
Features
- Suitable for high-performance machining on aluminum and other nonferrous materials
- Extended-reach neck style provides access to recessed areas of the workpiece
- 37-degree helix angle provides increased cutting action and chip evacuation compared to the standard 30-degree helix
- Three flutes provide better chip-carrying capacity than four flutes and a finer finish than two, reducing the need for a second finishing cut in some applications
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.10 pounds
See On Amazon #9
YG-1 E5976 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 37 Deg Helix, 2 Flutes, 4" Overall Length, 0.25" Cutting Diameter, 0.25" Shank Diameter
Asin: B0080CJOLQ | Model: 39573 | PartNumber: 39573 | Ean: 0300878206291 | UPC: 300878206291
Long-Reach End Mills Have An Extended Shank For Access To Recessed Areas Of The Workpiece.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
37-Degree Helix Angle Provides Increased Cutting Action And Chip Evacuation Compared To The Standard 30-Degree Helix.
Features
- Suitable for high-performance machining and step milling on aluminum and other nonferrous materials
- 37-degree helix angle provides increased cutting action and chip evacuation compared to the standard 30-degree helix
- Long-reach end mills have an extended shank for access to recessed areas of the workpiece
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
First Available: 12/12/2017
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.05 pounds
See On Amazon #10
YG-1 E5024 Carbide Square Nose End Mill, Double End, Weldon Shank, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 3.0625" Overall Length, 0.125" Cutting Diameter, 0.375" Shank Diameter
Asin: B0080B1IZC | Model: 13559 | PartNumber: 13559 | Ean: 0733438135593 | UPC: 733438135593
Four Flutes Produce A Better Finish Than Fewer Flutes.
Uncoated (Bright) Tools Have No Additional Surface Treatment Or Coating For Use On A Broad Range Of Materials.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Suitable For General-Purpose Machining On Hardened And High-Alloy Steel, Chromium-Nickel Steel, Steel Casting, Malleable Cast Iron, Brass, Copper, Aluminum With A High Percentage Of Silicon, And Abrasive Plastic.
Features
- Double-end square end mills create sharp, unrounded cuts and have cutting edges on both ends for longer tool life
- Suitable for general-purpose machining on hardened and high-alloy steel, chromium-nickel steel, steel casting, malleable cast iron, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
- Four flutes produce a better finish than fewer flutes
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Dimensions: 0.70 x 3.50 x 0.70 Inches
See On Amazon #11
YG-1 E5978 Carbide Ball Nose End Mill, Long Reach, Uncoated (Bright) Finish, 37 Deg Helix, 2 Flutes, 6" Overall Length, 0.5" Cutting Diameter, 0.5" Shank Diameter
Asin: B0080HAMV2 | Model: 89902 | PartNumber: 89902 | Ean: 0768413467666 | UPC: 768413467666
37-Degree Helix Provides Increased Cutting Action And Chip Evacuation Compared To Lower Helix Angles.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
Long-Reach End Mills Have An Extended Shank For Access To Recessed Areas Of The Workpiece.
Features
- Suitable for high-performance machining and step milling on aluminum and other nonferrous materials
- Long-reach end mills have an extended shank for access to recessed areas of the workpiece
- 37-degree helix provides increased cutting action and chip evacuation compared to lower helix angles
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon #12
YG-1 E5976 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, Finishing Cut, 37 Deg Helix, 2 Flutes, 6" Overall Length, 0.75" Cutting Diameter, 0.75" Shank Diameter
Asin: B0080CJYAW | Model: 39904 | PartNumber: 39904 | Ean: 0300878206475 | UPC: 300878206475
Long-Reach End Mills Have An Extended Shank For Access To Recessed Areas Of The Workpiece.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
37-Degree Helix Angle Provides Increased Cutting Action And Chip Evacuation Compared To The Standard 30-Degree Helix.
Features
- Suitable for high-performance machining and step milling on aluminum and other nonferrous materials
- 37-degree helix angle provides increased cutting action and chip evacuation compared to the standard 30-degree helix
- Long-reach end mills have an extended shank for access to recessed areas of the workpiece
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.00 pounds
See On Amazon #13
YG-1 E5976 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, Finishing Cut, 37 Deg Helix, 2 Flutes, 5" Overall Length, 0.75" Cutting Diameter, 0.75" Shank Diameter
Asin: B0080CJUA6 | Model: 39598 | PartNumber: 39598 | Ean: 0300878206451 | UPC: 300878206451
Long-Reach End Mills Have An Extended Shank For Access To Recessed Areas Of The Workpiece.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
37-Degree Helix Angle Provides Increased Cutting Action And Chip Evacuation Compared To The Standard 30-Degree Helix.
Features
- Suitable for high-performance machining and step milling on aluminum and other nonferrous materials
- 37-degree helix angle provides increased cutting action and chip evacuation compared to the standard 30-degree helix
- Long-reach end mills have an extended shank for access to recessed areas of the workpiece
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.00 pounds
See On Amazon #14
YG-1 - 1573 E5020 Carbide Square Nose End Mill, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 2.5" Overall Length, 0.25" Cutting Diameter, 0.25" Shank Diameter
Asin: B0080B71DA | Model: 01573 | PartNumber: 01573
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
Uncoated (Bright) Tools Have No Additional Surface Treatment Or Coating For Use On A Broad Range Of Materials.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Suitable For Machining On Hardened And High-Alloy Steel, Chromium-Nickel Steel, Steel Casting, Malleable Cast Iron, Brass, Copper, Aluminum With A High Percentage Of Silicon, And Abrasive Plastic.
Features
- Center-cutting design allows the end mill to plunge into material like a drill bit for applications such as slotting, drilling, and pocketing, as well as general-purpose machining
- Suitable for machining on hardened and high-alloy steel, chromium-nickel steel, steel casting, malleable cast iron, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials
- See more on Amazon...
First Available: 11/25/2017
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.07 pounds
See On Amazon #15
Drill America DEWC-6C6 3/8" C6 Carbide Tipped Square Nose Toolbit, Dew Series
Asin: B0771SZJ62 | Model: DEWC-6C6 | PartNumber: DEWC-6C6 | Ean: 0887861167246 | UPC: 887861167246
Country Of Origin : China.
Part Number: Dewc-6C6.
Package Weight : 1 Pounds.
Features
- Package Dimensions: 6.0 L x 2.0 H x 2.0 W (inches)
- Package Weight : 1 pounds
- Country of Origin : China
- Part number: DEWC-6C6
- See more on Amazon...
First Available: 10/30/2017
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches | Weight: 2.00 pounds
See On Amazon #16
Drill America DEWC-6C2 3/8" C2 Carbide Tipped Square Nose Toolbit, Dew Series
Asin: B0771JRD2T | Model: DEWC-6C2 | PartNumber: DEWC-6C2 | Ean: 0887861167239 | UPC: 887861167239
Country Of Origin : China.
Part Number: Dewc-6C2.
Package Weight : 1 Pounds.
Features
- Package Dimensions: 6.0 L x 2.0 H x 2.0 W (inches)
- Package Weight : 1 pounds
- Country of Origin : China
- Part number: DEWC-6C2
- See more on Amazon...
First Available: 10/30/2017
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon #17
Drill America DEWC-16C6 1" C6 Carbide Tipped Square Nose Toolbit, Dew Series
Asin: B0771GD7MQ | Model: DEWC-16C6 | PartNumber: DEWC-16C6 | Ean: 0887861167345 | UPC: 887861167345
Country Of Origin : China.
Part Number: Dewc-16C6.
Package Weight : 1 Pounds.
Features
- Package Dimensions: 6.0 L x 2.0 H x 2.0 W (inches)
- Package Weight : 1 pounds
- Country of Origin : China
- Part number: DEWC-16C6
- See more on Amazon...
First Available: 10/30/2017
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon #18
YG-1 55600TE Carbide End Mill, 4 Flute, Extra Long Length, YG:Tylon E Finish, 6" Length, 1"
Asin: B012FX4NDO | Model: 55600TE | PartNumber: 55600TE
Yg-1 Is Based In South Korea.
Yg-1, High Quality Cutting Tools.
Features
- Suitable for cutting hardened & high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, aluminum with a high percentage of silicon and abrasive plastics
- YG-1, High Quality Cutting Tools
- YG-1 is based in South Korea
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1
Weight: 0.00 pounds
See On Amazon #19
YG-1 55598TE Carbide End Mill, 4 Flute, Extra Long Length, YG:Tylon E Finish, 6" Length, 3/4"
Asin: B012FX4APA | Model: 55598TE | PartNumber: 55598TE
Yg-1 Is Based In South Korea.
Package Dimensions: 3" L X 1" W X 1" H.
Yg-1, High Quality Cutting Tools.
Features
- Suitable for cutting hardened & high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, aluminum with a high percentage of silicon and abrasive plastics
- YG-1, High Quality Cutting Tools
- YG-1 is based in South Korea
- Package Dimensions: 3 L x 1 W x 1 H
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1
See On Amazon
Looking For Something Else?
Search