YG-1 E5066 Carbide Square Nose End Mill, TIALN Multilayer Finish, Non-Center Cutting, 45 Deg Helix, 5 Flutes, 2" Overall Length, 0.1875" Cutting Diameter, 0.1875" Shank Diameter
Asin: B0080C9NMG | Model: 85565TF | PartNumber: 85565TF
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.45-Degree Helix Provides Increased Cutting Action Compared To End Mills With Lower Helix Angles.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Titanium Aluminum Nitride (Tialn) Coating Lubricates The End Mill For High-Temperature Stability And Abrasion Resistance At High Cutting Speeds, Offering Better Heat Resistance Than Tin And Ticn Coatings.
Stub Length Increases The Strength Of The Tool, Making It Less Likely To Break In The Workpiece.
Features
- Suitable for general-purpose machining on materials such as stainless steel and nickel-based alloys
- Stub length increases the strength of the tool, making it less likely to break in the workpiece
- 45-degree helix provides increased cutting action compared to end mills with lower helix angles
- Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than TiN and TiCN coatings
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon Similar To YG1 E5066 Carbide Square Nose
#1
YG-1 E5011 Carbide Square Nose End Mill, Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 4" Overall Length, 0.5" Cutting Diameter, 0.5" Shank Diameter
Asin: B0080CPZ2S | Model: 02593 | PartNumber: 02593
Long-Length End Mills Have Longer Cutting Edges And Can Make Deeper Cuts Than Standard-Length End Mills.
Uncoated (Bright) Tools Have No Additional Surface Treatment Or Coating For Use On A Broad Range Of Materials.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
Features
- Suitable for general-purpose machining on hardened and high-alloy steel, chromium-nickel steel, steel casting, malleable cast iron, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Long-length end mills have longer cutting edges and can make deeper cuts than standard-length end mills
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials
- See more on Amazon...
First Available: 11/25/2017
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon #2
F&D Tool Company 30265-X616 Square Tool Bits, Red Nose, Cobalt, 3/8 Square Inch, 3" Overall Length
Asin: B00I67HOTY | Model: 30265-X616 | PartNumber: 30265-X616
A Superior Quality Full Ground Tool Bit That Preforms Exceptionally Well On Forgings, Castings And Any Cuts Of Heavy Nature Or Where High Heat Is A Factor.
Made In Usa.
Red Nose (Cobalt) - Inches Square: 3/8 - Length Overall: 3.
Features
- Square Tool Bit
- Red Nose (Cobalt) - Inches Square: 3/8 - Length Overall: 3
- A superior quality Full Ground Tool Bit that preforms exceptionally well on forgings, castings and any cuts of heavy nature or where high heat is a factor
- Made in USA
- See more on Amazon...
Brand: F&D Tool Company | Manufacturer: F&D Tool Company
See On Amazon #3
YG-1 E5978 Carbide Ball Nose End Mill, Long Reach, Uncoated (Bright) Finish, 37 Deg Helix, 2 Flutes, 4" Overall Length, 0.25" Cutting Diameter, 0.25" Shank Diameter
Asin: B0080HAEHY | Model: 89573 | PartNumber: 89573
37-Degree Helix Provides Increased Cutting Action And Chip Evacuation Compared To Lower Helix Angles.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
Long-Reach End Mills Have An Extended Shank For Access To Recessed Areas Of The Workpiece.
Features
- Suitable for high-performance machining and step milling on aluminum and other nonferrous materials
- Long-reach end mills have an extended shank for access to recessed areas of the workpiece
- 37-degree helix provides increased cutting action and chip evacuation compared to lower helix angles
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.30 Pounds
See On Amazon #4
YG-1 E5062 Carbide Ball Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 6" Overall Length, 0.5" Cutting Diameter, 0.5" Shank Diameter
Asin: B0080D39DO | Model: 53593 | PartNumber: 53593 | Ean: 5915903873628
Four Flutes Produce A Better Finish Than Fewer Flutes.
Ball Nose End Mills (Also Called Ball End) Create Contoured Surfaces.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Extra-Long-Length End Mills Have Longer Cutting Edges And Can Make Deeper Cuts Than Long-Length End Mills.
Features
- Suitable for machining on hardened and high-alloy steel, steel casting, chill casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
- Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
- Four flutes produce a better finish than fewer flutes
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- Ball nose end mills (also called ball end) create contoured surfaces
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon #5
YG-1 - 18071 E1071 High Speed Steel (HSS) Square Nose End Mill, Long Reach, Weldon Shank, Uncoated (Bright) Finish, 42 Deg Helix, 2 Flutes, 4" Overall Length, 0.5" Cutting Diameter, 0.5" Shank Diameter
Asin: B0080CZX4S | Model: 18071 | PartNumber: 18071 | Ean: 0733438180715 | UPC: 733438180715
Long-Length End Mills Have Longer Cutting Edges And Can Make Deeper Cuts Than Standard-Length End Mills.
High-Speed Steel For General-Purpose Cutting.
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
42-Degree Helix Provides Increased Cutting Action Compared To End Mills With Lower Helix Angles.
Features
- Suitable for machining on aluminum and other nonferrous materials
- 42-degree helix provides increased cutting action compared to end mills with lower helix angles
- Long-length end mills have longer cutting edges and can make deeper cuts than standard-length end mills
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- High-speed steel for general-purpose cutting
- See more on Amazon...
First Available: 12/12/2017
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.15 Pounds
See On Amazon #6
YG-1 - 52558 E5018 Carbide Ball Nose End Mill, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 3" Overall Length, 0.125" Cutting Diameter, 0.125" Shank Diameter
Asin: B0080D4ICA | Model: 52558 | PartNumber: 52558
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
Ball Nose End Mills (Also Called Ball End) Create Contoured Surfaces.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Extra-Long-Length End Mills Have Longer Cutting Edges And Can Make Deeper Cuts Than Long-Length End Mills.
Features
- Suitable for machining on hardened and high-alloy steel, steel casting, chill casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
- Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- Ball nose end mills (also called ball end) create contoured surfaces
- See more on Amazon...
First Available: 11/25/2017
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon #7
YG-1 E5980 Carbide Square Nose End Mill, Uncoated (Bright) Finish, Finishing Cut, Non-Center Cutting, 45 Deg Helix, 3 Flutes, 2" Overall Length, 0.3125" Cutting Diameter, 0.3125" Shank Diameter
Asin: B0080BT4L2 | Model: 25579 | PartNumber: 25579 | Ean: 0300878207724 | UPC: 300878207724
45-Degree Helix Provides Increased Cutting Action Compared To End Mills With Lower Helix Angles.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Three Flutes Provide Better Chip-Carrying Capacity Than Four Flutes And A Finer Finish Than Two, Reducing The Need For A Second Finishing Cut In Some Applications.
Stub Length Increases The Strength Of The Tool, Making It Less Likely To Break In The Workpiece.
Features
- Suitable for high-performance machining on aluminum and other nonferrous materials
- Stub length increases the strength of the tool, making it less likely to break in the workpiece
- 45-degree helix provides increased cutting action compared to end mills with lower helix angles
- Three flutes provide better chip-carrying capacity than four flutes and a finer finish than two, reducing the need for a second finishing cut in some applications
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.05 pounds
See On Amazon #8
YG-1 E5982 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, Finishing Cut, Non-Center Cutting, 45 Deg Helix, 3 Flutes, 3.5" Overall Length, 0.3125" Cutting Diameter, 0.3125" Shank Diameter
Asin: B0080BK6C8 | Model: 36579 | PartNumber: 36579
45-Degree Helix Provides Increased Cutting Action Compared To End Mills With Lower Helix Angles.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Three Flutes Provide Better Chip-Carrying Capacity Than Four Flutes And A Finer Finish Than Two, Reducing The Need For A Second Finishing Cut In Some Applications.
Long-Length End Mills Have Longer Cutting Edges And Can Make Deeper Cuts Than Standard-Length End Mills.
Features
- Suitable for high-performance machining on aluminum and other nonferrous materials
- Long-length end mills have longer cutting edges and can make deeper cuts than standard-length end mills
- 45-degree helix provides increased cutting action compared to end mills with lower helix angles
- Three flutes provide better chip-carrying capacity than four flutes and a finer finish than two, reducing the need for a second finishing cut in some applications
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon #9
YG-1 E5974 Carbide Ball Nose End Mill, Uncoated (Bright) Finish, 50 Deg Helix, 2 Flutes, 3" Overall Length, 0.5" Cutting Diameter, 0.5" Shank Diameter
Asin: B0080HBGX0 | Model: 37593 | PartNumber: 37593 | Ean: 0768413467369 | UPC: 768413467369
50-Degree Helix Offers Increased Cutting Action Compared To End Mills With Lower Helix Angles.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
Stub Length Cutting Edges Increase The Strength Of The Tool, Making It Less Likely To Break In The Workpiece.
Features
- Suitable for high-performance machining on aluminum, stainless steel, and copper
- Stub length cutting edges increase the strength of the tool, making it less likely to break in the workpiece
- 50-degree helix offers increased cutting action compared to end mills with lower helix angles
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.15 Pounds
See On Amazon #10
YG-1 E5254 Carbide Square Nose End Mill, Uncoated (Bright) Finish, Finishing Cut, 42 Deg Helix, 2 Flutes, 2.5" Overall Length, 0.375" Cutting Diameter, 0.375" Shank Diameter
Asin: B0080C8R2S | Model: 21584 | PartNumber: 21584 | Ean: 0300878205522 | UPC: 300878205522
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Low Surface Roughness On The Cutting Edge Reduces Friction And Prevents Chips From Sticking To The Tool.
42-Degree Helix Provides Increased Cutting Action Compared To End Mills With Lower Helix Angles.
Features
- Suitable for high-performance plunging and machining on aluminum and other nonferrous materials
- 42-degree helix provides increased cutting action compared to end mills with lower helix angles
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Low surface roughness on the cutting edge reduces friction and prevents chips from sticking to the tool
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon #11
uxcell Square Nose End Mill, 6mm Tip Dia Solid Carbide AlTiN Coated CNC Router Bits 4 Flute Spiral Milling Cutter HRC55 with 6mm Shank 50mm (2-inch) Length
Asin: B09T3QFDRX | Model: a22010500ux0301 | PartNumber: a22010500ux0301
Wide Applications: Suitable For Cutting Carbon Steel, Malleable Cast Iron, Alloy Steel, Stainless Steel, Die Steel, Tool Steel, Heat Treated Steel. For Shallow Groove Machining, Side Milling And Finishing. Use On Cnc Machining Centers, Engraving Machines And Other High-Speed Cnc Machine Tools..
Tips: The Longer The Length Of The Tool Clamped By The Chuck, The Better. Combined With The Material To Be Processed, Select An Appropriate Feed Rate And Cutting Speed To Obtain Better Processing Accuracy And Performance..
Features: Square End Cut, 4-Flute Design, Spiral Chip Space Design For Fast And Clean Chip Removal. Sharp Cutting Edge Provides Smooth Cutting. Altin Composite Coating Can Increase Hardness, Reduce Oxidation Wear For Better Wear Resistance And Extend Tool Life..
Solid Carbide Tool: M30 Carbide End Mill Cutter Is Super Fine Grain Carbide, With High Hardness, Wear Resistance, And Heat Resistance. Carbide Material With Good Milling And Cutting Performance. Carbide Can Run At Higher Speed Than High-Speed Steel..
Features
- Square Nose End Mill: Cutting Diameter: 6mm / 0.24"; cutting flute length: 15mm / 0.59"; shank diameter: 6mm / 0.24"; overall length: 50mm / 2"; cutting hardness: HRC55; spiral angle: 35 degree.
- Solid Carbide Tool: M30 carbide end mill cutter is super fine grain carbide, with high hardness, wear resistance, and heat resistance. Carbide material with good milling and cutting performance. Carbide can run at higher speed than high-speed steel.
- Wide Applications: Suitable for cutting carbon steel, malleable cast iron, alloy steel, stainless steel, die steel, tool steel, heat treated steel. For shallow groove machining, side milling and finishing. Use on CNC machining centers, engraving machines and other high-speed CNC machine tools.
- Features: Square end cut, 4-flute design, spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting. AlTiN composite coating can increase hardness, reduce oxidation wear for better wear resistance and extend tool life.
- Tips: The longer the length of the tool clamped by the chuck, the better. Combined with the material to be processed, select an appropriate feed rate and cutting speed to obtain better processing accuracy and performance.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #12
YG-1 E1070 High Speed Steel (HSS) Square Nose End Mill, Weldon Shank, Uncoated (Bright) Finish, 42 Deg Helix, 2 Flutes, 3.25" Overall Length, 0.5" Cutting Diameter, 0.5" Shank Diameter
Asin: B0080BVCSA | Model: 17071 | PartNumber: 17071 | Ean: 0733438170716 | UPC: 733438170716
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
High-Speed Steel For General-Purpose.
Center-Cutting Design Allows The End Mill To Plunge Into Material Like A Drill Bit While Also Performing Conventional Surface Milling.
42-Degree Helix Provides Increased Cutting Action Compared To End Mills With Lower Helix Angles.
Features
- Suitable for machining on aluminum and other nonferrous materials
- 42-degree helix provides increased cutting action compared to end mills with lower helix angles
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling
- High-speed steel for general-purpose
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.00 Pounds
See On Amazon #13
YG-1 E5020 Carbide Square Nose End Mill, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 1.5" Overall Length, 0.0937" Cutting Diameter, 0.125" Shank Diameter
Asin: B0080B6L5Y | Model: 01556 | PartNumber: 01556
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
Uncoated (Bright) Tools Have No Additional Surface Treatment Or Coating For Use On A Broad Range Of Materials.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Suitable For Machining On Hardened And High-Alloy Steel, Chromium-Nickel Steel, Steel Casting, Malleable Cast Iron, Brass, Copper, Aluminum With A High Percentage Of Silicon, And Abrasive Plastic.
Features
- Center-cutting design allows the end mill to plunge into material like a drill bit for applications such as slotting, drilling, and pocketing, as well as general-purpose machining
- Suitable for machining on hardened and high-alloy steel, chromium-nickel steel, steel casting, malleable cast iron, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.07 pounds
See On Amazon #14
YG-1 E5975 Carbide Ball Nose End Mill, Coolant Through, Uncoated (Bright) Finish, 40 Deg Helix, 3 Flutes, 2.375" Overall Length, 0.125" Cutting Diameter, 0.25" Shank Diameter
Asin: B0080HA43I | Model: 38601 | PartNumber: 38601 | Ean: 0768413467444 | UPC: 768413467444
40-Degree Helix Provides Increased Cutting Action And Chip Evacuation Compared To The Standard 30-Degree Helix.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Three Flutes Provide Better Chip-Carrying Capacity Than Four Flutes And A Finer Finish Than Two, Reducing The Need For A Second Finishing Cut In Some Applications.
Long-Length End Mills Have Longer Cutting Edges And Can Make Deeper Cuts Than Standard-Length End Mills.
Features
- Suitable for high-performance machining on aluminum, stainless steel, and copper
- Long-length end mills have longer cutting edges and can make deeper cuts than standard-length end mills
- 40-degree helix provides increased cutting action and chip evacuation compared to the standard 30-degree helix
- Three flutes provide better chip-carrying capacity than four flutes and a finer finish than two, reducing the need for a second finishing cut in some applications
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.00 pounds
See On Amazon #15
YG-1 E5977 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, Finishing Cut, Non-Center Cutting, 37 Deg Helix, 3 Flutes, 4" Overall Length, 0.25" Cutting Diameter, 0.25" Shank Diameter
Asin: B0080CKBEA | Model: 40573 | PartNumber: 40573
37-Degree Helix Angle Provides Increased Cutting Action And Chip Evacuation Compared To The Standard 30-Degree Helix.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Three Flutes Provide Better Chip-Carrying Capacity Than Four Flutes And A Finer Finish Than Two, Reducing The Need For A Second Finishing Cut In Some Applications.
Extended-Reach Neck Style Provides Access To Recessed Areas Of The Workpiece.
Features
- Suitable for high-performance machining on aluminum and other nonferrous materials
- Extended-reach neck style provides access to recessed areas of the workpiece
- 37-degree helix angle provides increased cutting action and chip evacuation compared to the standard 30-degree helix
- Three flutes provide better chip-carrying capacity than four flutes and a finer finish than two, reducing the need for a second finishing cut in some applications
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.10 Pounds
See On Amazon #16
uxcell Square Nose End Mill, 6mm Tip Dia Solid Carbide AlTiN Coated CNC Router Bits 2 Flute Spiral Milling Cutter HRC55 with 6mm Shank 100mm (4-inch) Length
Asin: B09T3PGX8Y | Model: a22010500ux0316 | PartNumber: a22010500ux0316
Wide Applications: Suitable For Cutting Carbon Steel, Malleable Cast Iron, Alloy Steel, Stainless Steel, Die Steel, Tool Steel, Heat Treated Steel. For Shallow Groove Machining, Side Milling And Finishing. Use On Cnc Machining Centers, Engraving Machines And Other High-Speed Cnc Machine Tools..
Tips: The Longer The Length Of The Tool Clamped By The Chuck, The Better. Combined With The Material To Be Processed, Select An Appropriate Feed Rate And Cutting Speed To Obtain Better Processing Accuracy And Performance..
Features: Square End Cut, 2-Flute Design, Spiral Chip Space Design For Fast And Clean Chip Removal. Sharp Cutting Edge Provides Smooth Cutting. Altin Composite Coating Can Increase Hardness, Reduce Oxidation Wear For Better Wear Resistance And Extend Tool Life..
Solid Carbide Tool: M30 Carbide End Mill Cutter Is Super Fine Grain Carbide, With High Hardness, Wear Resistance, And Heat Resistance. Carbide Material With Good Milling And Cutting Performance. Carbide Can Run At Higher Speed Than High-Speed Steel..
Features
- Square Nose End Mill: Cutting Diameter: 6mm / 0.24"; cutting flute length: 30mm / 1.18"; shank diameter: 6mm / 0.24"; overall length: 100mm / 4"; cutting hardness: HRC55; spiral angle: 35 degree.
- Solid Carbide Tool: M30 carbide end mill cutter is super fine grain carbide, with high hardness, wear resistance, and heat resistance. Carbide material with good milling and cutting performance. Carbide can run at higher speed than high-speed steel.
- Wide Applications: Suitable for cutting carbon steel, malleable cast iron, alloy steel, stainless steel, die steel, tool steel, heat treated steel. For shallow groove machining, side milling and finishing. Use on CNC machining centers, engraving machines and other high-speed CNC machine tools.
- Features: Square end cut, 2-flute design, spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting. AlTiN composite coating can increase hardness, reduce oxidation wear for better wear resistance and extend tool life.
- Tips: The longer the length of the tool clamped by the chuck, the better. Combined with the material to be processed, select an appropriate feed rate and cutting speed to obtain better processing accuracy and performance.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #17
Drill America DEWC-5C6 5/16" C6 Carbide Tipped Square Nose Toolbit, Dew Series
Asin: B0771FDZPV | Model: DEWC-5C6 | PartNumber: DEWC-5C6 | Ean: 0887861167222 | UPC: 887861167222
Dew Series.
Qualtech Brand.
First Available: 10/30/2017
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches | Weight: 2.00 pounds
See On Amazon #18
YG-1 E1004 High Speed Steel (HSS) Square Nose End Mill, Double End, Uncoated (Bright) Finish, 39 Deg Helix, 4 Flutes, 2.25" Overall Length, 0.0937" Cutting Diameter, 0.1875" Shank Diameter
Asin: B0080CSXVI | Model: 53010 | PartNumber: 53010
Suitable For Finishing Precision Components On Steel, Stainless Steel, Titanium, Titanium Alloys, Hard Brass And Bronze, Copper, Plastic, Wood, Aluminum, And Aluminum Alloys.
High-Speed Steel Is Compatible With A Variety Of Materials.
Four Flutes Produce A Better Finish Than Fewer Flutes.
Double-End Square End Mills Create Sharp, Unrounded Cuts And Have Cutting Edges On Both Ends For Longer Tool Life.
Features
- Miniature end mills have small cutting and shank diameters for better control than larger tools when creating precise details and contours
- Double-end square end mills create sharp, unrounded cuts and have cutting edges on both ends for longer tool life
- Suitable for finishing precision components on steel, stainless steel, titanium, titanium alloys, hard brass and bronze, copper, plastic, wood, aluminum, and aluminum alloys
- Four flutes produce a better finish than fewer flutes
- High-speed steel is compatible with a variety of materials
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon #19
YG-1 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 6" Overall Length, 0.4375" Cutting Diameter, 0.4375" Shank Diameter -55588
Asin: B0080C5GJU | Model: 55588 | PartNumber: 55588 | Ean: 0085937555885 | UPC: 085937555885
Four Flutes Produce A Better Finish Than Fewer Flutes.
Uncoated (Bright) Tools Have No Additional Surface Treatment Or Coating For Use On A Broad Range Of Materials.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Extra-Long-Length End Mills Have Longer Cutting Edges And Can Make Deeper Cuts Than Long-Length End Mills.
Features
- Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
- Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
- Four flutes produce a better finish than fewer flutes
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon
Looking For Something Else?
Search