MIZUGIWA 1 Inch Scope Mount Rings Medium Profile for 11mm Dovetail Rails 2-Piece
Asin: B01A5ICHVG | Ean: 0603161961090 | UPC: 603161961090
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.One Of The Rings Has A Stop Pin The Bottom Of It For Rock Solid Application.
Scope Rings Type: Medium Profile, Fit For A 3/8" Or 11Mm Dovetail Mount.
With Four Screws Design, It Will Hold The Scope More Securly Than A Single Screw On Both Side.
Made Of Alloy With Anodized Black Matte Finish.
Features
- Scope Mount Rings1 Inch Medium Profile Dovetail
- Made of Alloy with Anodized Black Matte Finish
- One of the rings has a stop pin the bottom of it for rock solid application
- With four screws design, it will hold the scope more securly than a single screw on both side
- Scope Rings Type: Medium Profile, Fit for a 3/8 or 11mm dovetail mount
- See more on Amazon...
Brand: MIZUGIWA | Manufacturer: Mizugiwa (BJ) Co.,Ltd
See On Amazon Similar To MIZUGIWA 1 Inch Scope Mount
#1
Monstrum Precision Scope Rings | 1 inch Diameter | Picatinny | 1.00 inch Height
Asin: B083F8SY2V | Ean: 0850004377352 | UPC: 850004377352
1 Inch Diameter Rings For Mounting Standard 1 Inch Rifle Scope Tubes.
Available In Four Heights To Match Your Needs: 0.80 Inch, 1.00 Inch, 1.20 Inch, And 1.35 Inch.
Available With Either Picatinny Or Weaver Standard Base.
Monstrum Precision Scope Rings Are Precision Crafted To A Given Height Specification To Match Your Particular Rifle Setup And Preferred Cheek Weld.
Features
- 1.00 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount
- Monstrum Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld
- 1 inch diameter rings for mounting standard 1 inch rifle scope tubes
- Available with either Picatinny or Weaver standard base
- Available in four heights to match your needs: 0.80 inch, 1.00 inch, 1.20 inch, and 1.35 inch
- See more on Amazon...
Brand: Monstrum | Manufacturer: Monstrum
Weight: 0.25 pounds
See On Amazon #2
Monstrum Slim Profile Series Offset Cantilever Picatinny Scope Mount | 1 inch Diameter | Black
Asin: B07G2SM28N | Ean: 0704715312341 | UPC: 704715312341
Mounts To Any Flat Top Picatinny Rail Equipped Rifle.
5 Ounces In Weight And 5 Inches In Total Length, With A Base Of 3 Inches And 2.5 Inches Of Spacing Between The Rings.
2 Inches Of Forward Extension Allows Extra Flexibility For Optimum Eye Relief And Shooting Position.
Slim Profile Design Offers The Weight Of Lightweight Scope Rings With The Added Rigidity And Convenience Of A One Piece Mount.
Features
- Dual ring scope mount available for both standard 1 inch and standard 30mm tube rifle scopes
- Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount
- Mounts to any flat top Picatinny rail equipped rifle
- 2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position
- 5 ounces in weight and 5 inches in total length, with a base of 3 inches and 2.5 inches of spacing between the rings
- See more on Amazon...
Brand: Monstrum | Manufacturer: Monstrum
Weight: 0.31 pounds
See On Amazon #3
Modkin 1 Inch Scope Rings Set of 4, 2 Pieces High Profile Scope Mounts & 2 Pieces Medium Profile Scope Rings for Picatinny/Weaver Rail
Asin: B081NG7FCS | Ean: 0603470407869 | UPC: 603470407869
Lightweight: Aluminum Alloy With Black Anodized Surface, Sturdy And Lightweight. The Hollowed Out Is Designed To Be Extremely Lightweight And Provide Potential Vision..
Size Detail: Medium Profile Dimension: 1.9 X 1.6 X 0.8 Inch, Weight: 2 Ounce; High Profile Dimension: 2.0 X 1.6 X 0.8 Inch, Weight: 2 Ounce..
Rail Clamp Screw Design: With 1 Rail Clamp Screw And 2 Scope Clamp Screws Perside, Ensure Mount All 1 Inch Scope Firmly. Comes With 2 Pieces Allen Wrench..
Built-In Tape Protection: Not Only Can It Prevent The Scope From Being Scratched, But Also The Scope Moving Forward Due To The Recoil Force Of Multiple Shots..
Features
- Perfect for All 21mm Picatinny/ Weaver Rails: This set includes 2 pieces medium profile and 2 pieces high profile. Suitable for all 1 inch / 25.4mm scope tube.
- Built-in Tape Protection: Not only can it prevent the scope from being scratched, but also the scope moving forward due to the recoil force of multiple shots.
- Lightweight: Aluminum alloy with black anodized surface, sturdy and lightweight. The hollowed out is designed to be extremely lightweight and provide potential vision.
- Rail Clamp Screw Design: With 1 rail clamp screw and 2 scope clamp screws perside, ensure mount all 1 inch scope firmly. Comes with 2 pieces allen wrench.
- Size Detail: Medium Profile Dimension: 1.9 x 1.6 x 0.8 inch, Weight: 2 ounce; High Profile Dimension: 2.0 x 1.6 x 0.8 Inch, Weight: 2 ounce.
- See more on Amazon...
Brand: Modkin | Manufacturer: Modkin
Weight: 0.13 pounds
See On Amazon #4
Vortex Optics Hunter 1-inch Riflescope Rings - High Height (1.22 inches), Matte Black
Asin: B003GSOI1K | Model: RING-H | PartNumber: RING-H | Ean: 0875874002166 | UPC: 875874002166
Made From Aircraft-Grade 6061-T6 Aluminum For Optimum Strength. Torque Specs: Base Clamp Screws-25-30 In/Lbs, Ring Screws-15 In/Lbs..
Backed By Our Unlimited, Unconditional, Lifetime, Vip Warranty. A Fully Transferable Promise To Repair Or Replace Your Item If It Becomes Damaged/Defective. Does Not Cover Loss, Theft, Deliberate Damage Or Cosmetic Damage That Doesn't Hinder Performance..
Sold Two Rings Per Package..
Mounting To A Picatinny Or Weaver Type Rail, The Standard, 2-Screw Hunter Rings Are A Nice Match For General Hunting Setups. Do Not Recommend The Hunter Rings For Use On Heavy Recoiling Rifles..
Features
- These Vortex Hunter Rings position the center of the riflescope tube at a height of 1.22 inches (31.0 mm) from the base.
- Mounting to a Picatinny or Weaver type rail, the standard, 2-screw Hunter rings are a nice match for general hunting setups. Do not recommend the Hunter Rings for use on heavy recoiling rifles.
- Made from aircraft-grade 6061-T6 aluminum for optimum strength. Torque Specs: Base Clamp Screws-25-30 in/lbs, Ring Screws-15 in/lbs.
- Sold two rings per package.
- Backed by our unlimited, unconditional, lifetime, VIP Warranty. A fully transferable promise to repair or replace your item if it becomes damaged/defective. Does not cover loss, theft, deliberate damage or cosmetic damage that doesn't hinder performance.
- See more on Amazon...
First Available: 01/23/2023
Brand: Vortex | Manufacturer: Vortex Optics
Dimensions: 1.30 x 5.00 x 4.80 inches | Weight: 0.20 pounds
Warranty: Unlimited, unconditional lifetime warranty.
See On Amazon #5
Modkin Scope Rings, Rifle Scope Mount High Profile Scope Mounts for Picatinny Rail (1 inch, Set of 2)
Asin: B073LK77FQ | Ean: 0603470406626 | UPC: 603470406626
Built-In Tape Inside Per Rings To Prevent From Marring The Scope, Also Prevent Sliding And Holding Postion Accurately..
With 1 Rail Clamp Screw And 2 Scope Clamp Screw Per Side, Ensure Mount Any 1 Inch Scope Firmly, Just Twist Off The Nut And Mount The Base On The 21Mm Rail Easily..
The Ring Is For Most Scopes Which Are In 1 Inch / 25.4Mm Scope Tube. High Profile, 0.71 Inch Gap From Base Of Mount To Bottom Of Rings. ( Item Height: 2 Inch).
Design In Hollowed-Out Configuration Between The Ring And The Bottom Of The Base, To Release Heavy Duty When Clamping Your Scope..
Features
- Double scope ring mount for Picatinny/ Weaver Rail (21mm).
- Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope.
- Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately.
- The ring is for most scopes which are in 1 inch / 25.4mm scope tube. High profile, 0.71 inch gap from base of mount to bottom of rings. ( Item height: 2 inch)
- With 1 rail clamp screw and 2 scope clamp screw per side, ensure mount any 1 inch scope firmly, just twist off the nut and mount the base on the 21mm rail easily.
- See more on Amazon...
Brand: Modkin | Manufacturer: Modkin
See On Amazon #6
CVLIFE Cantilever Scope Mounts 1 inch, Offset Dual Ring One-Piece Scope Mount, Lightweight Aluminum
Asin: B0CH9RWGHK
Offset Cantilever Mount: Scope Mount Features A 2.4" Forward Extension, Which Can Provide Better Head Placement Flexibly And Find Proper And Correct Eye Relief, Increasing Comfort And Reducing Fatigue, Which Is Important For All-Day Use..
Torx Screws: Strong Torx Screws Allow For Precise Tightening And Reduce Stripping. Comes With Spare 4 Torx Screws, Which Can Be Replaced At Any Time, Increasing Durability And Service Life..
Lightweight Material: This Offset Dual Ring Scope Mount Is Made Of 6061 Aviation Aluminum Material And Weighs Only 5.8 Oz, Which Doesn’T Add Much Extra Weight To You..
Hold Well Zero: Two Screws On Each Side Of The Ring Provide A Sturdy And Recoil-Resistant Grip To Your Scope, With Perfect Alignment Between The Front And Rear Rings. It Has Four Fastening Recoil Lugs For Tight Mounting On The Picatinny Rail, Which Can Hold Your Optic Very Securely..
Features
- 1 Inch Scope Mount: CVLIFE 1" scope mount is suitable for scopes with a diameter of 1", the spacing between the rings is 2.36", the center to base height is 1.57", base length is 3".
- Hold Well Zero: Two screws on each side of the ring provide a sturdy and recoil-resistant grip to your scope, with perfect alignment between the front and rear rings. It has four fastening recoil lugs for tight mounting on the picatinny rail, which can hold your optic very securely.
- Offset Cantilever Mount: Scope mount features a 2.4 forward extension, which can provide better head placement flexibly and find proper and correct eye relief, increasing comfort and reducing fatigue, which is important for all-day use.
- Lightweight Material: This offset dual ring scope mount is made of 6061 aviation aluminum material and weighs only 5.8 oz, which doesn t add much extra weight to you.
- Torx Screws: Strong torx screws allow for precise tightening and reduce stripping. Comes with spare 4 torx screws, which can be replaced at any time, increasing durability and service life.
- See more on Amazon...
Brand: CVLIFE | Manufacturer: CVLIFE
Dimensions: 3.94 x 3.94 x 3.94 inches
See On Amazon #7
Modkin 11mm Dovetail Scope Mounts for 1'' Scope Tube High Profile for Airguns or Premium .22 Rifles (Set of 2)
Asin: B071DXCF41 | Model: SUVELAM | PartNumber: SUVELAM | Ean: 0603470403069 | UPC: 603470403069
Lightweight: 1.15Oz Per Ring. High Profile, 20Mm/0.79In Gap From Base Of Mount To Bottom Of Rings. ( Item Height: 1.97'').
With Only 1 Rail Clamp Screw And 1 Scope Clamp Screw Per Side, Quick And Easy To Install. Precision And Repeatable Alignment..
The Ring Is For Most Scopes Which Are In 1''/ 25.4Mm Scope Tube..
Design In Hollowed-Out Configuration Between The Ring And The Bottom Of The Base, To Release Heavy Duty When Clamping Your Scope..
Features
- Double scope ring mount for 11mm dovetail rail, specialized scope mount for Airgun/.22 Rails.
- Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope.
- Lightweight: 1.15oz per ring. High profile, 20mm/0.79in gap from base of mount to bottom of rings. ( Item height: 1.97'')
- The ring is for most scopes which are in 1''/ 25.4mm scope tube.
- With only 1 rail clamp screw and 1 scope clamp screw per side, quick and easy to install. Precision and Repeatable Alignment.
- See more on Amazon...
Brand: Modkin | Manufacturer: Modkin
See On Amazon #8
Monstrum Slim Profile Series Cantilever Offset Dual Ring Picatinny Scope Mount with Quick Release | 1 inch Diameter | Black
Asin: B07MJCT11L | Ean: 0704715312389 | UPC: 704715312389
Attaches And Detaches Easily Via Integrated Quick Release Mechanism, Without Additional Tools Or Tightening.
5 Ounces In Weight And 5 Inches In Total Length, With A Base Of 3 Inches And 2.5 Inches Of Spacing Between The Rings.
2 Inches Of Forward Extension Allows Extra Flexibility For Optimum Eye Relief And Shooting Position.
Slim Profile Design Offers The Weight Of Lightweight Scope Rings With The Added Rigidity And Convenience Of A One Piece Mount.
Features
- Dual ring scope mount for mounting standard 1 inch tube rifle scopes to Picatinny equipped rifles
- Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount
- Attaches and detaches easily via integrated quick release mechanism, without additional tools or tightening
- 2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position
- 5 ounces in weight and 5 inches in total length, with a base of 3 inches and 2.5 inches of spacing between the rings
- See more on Amazon...
Brand: Monstrum | Manufacturer: Monstrum
Weight: 0.38 pounds
See On Amazon #9
CVLIFE 1 Inch Scope Rings - High Profile Precision Rifle Scope Mount for 20mm Picatinny Rails - 2 Pieces
Asin: B0CC2KD4ST
▶【 High-Quality Precise Rail Rings 】Made From Aircraft-Grade 6061-T6 Aluminum Alloy With A Matte Black Anodized Finish To Prevent Scratches And Blemishes. Our Sporting Optics Mounts & Rings Are Cnc Machined With Zero Tolerances For Errors In Any Conditions..
▶【 Lightweight And Sturdy Scope Mounting Kit】The Package Includes Two Rings, A T15 Wrench, And Four Free Screws. Each Ring Has A Weight Reduction Design And Weighs 2 Oz..
▶【 Torx Screws Easy Precise Mounting 】 Stainless Steel Mounting Hardware Tightens Quickly And Firmly While Protecting The Screws From Stripping. Cvlife Recommends A Maximum Torque Setting Of No More Than 18 In/Lbs For Ring Screws And 30 In/Lbs For Base Screws..
▶【Stable Scope Mount With Recoil Stop】The Scope Ring With Enhanced Recoil Stop Prevents The Scope From Moving Forward, Allowing For Stability And Safe Mounting. Two T-15 Torx Screws Per Side And 0.85-Inch Extra-Wide Sides Ensure Secure Mounting Of All 1-Inch Scopes..
Features
- High Profile Precision Scope Ring The 1 inch scope rings positions the center of the scope tube 1.2 inches from the base. Only suitable for Picatinny rails, not compatible with Weaver rails.
- Stable Scope Mount with Recoil Stop The scope ring with enhanced recoil stop prevents the scope from moving forward, allowing for stability and safe mounting. Two T-15 Torx screws per side and 0.85-inch extra-wide sides ensure secure mounting of all 1-inch scopes.
- High-quality Precise Rail Rings Made from aircraft-grade 6061-T6 aluminum alloy with a matte black anodized finish to prevent scratches and blemishes. Our sporting optics mounts & rings are CNC machined with zero tolerances for errors in any conditions.
- Torx Screws Easy Precise Mounting Stainless steel mounting hardware tightens quickly and firmly while protecting the screws from stripping. CVLIFE recommends a maximum torque setting of no more than 18 in/lbs for ring screws and 30 in/lbs for base screws.
- Lightweight and Sturdy Scope Mounting Kit The package includes two rings, a T15 wrench, and four free screws. Each ring has a weight reduction design and weighs 2 oz.
- See more on Amazon...
Brand: CVLIFE | Manufacturer: CVLIFE
Dimensions: 2.00 x 1.69 x 0.85 inches
See On Amazon #10
Monstrum Deadlock Series Dual Ring Scope Mount | Offset Cantilever | 1 inch Diameter
Asin: B0CWMXZM7Q | Ean: 0810088816772 | UPC: 810088816772
Available In 2 Different Mount Configurations Allowing For Optimum Placement Of Your Optic: Inline Rings And Offset Cantilever Rings. Available In 1 Inch, 30 Mm, And 34 Mm Diameter Configurations..
All Monstrum Products Are Backed By A Lifetime Guarantee.
Mounts To Any Flat Top Picatinny Equipped Rifle With Custom Picatinny Locking Bolts That Slot Seamlessly Into Your Picatinny Rail With Zero Wiggle - Guaranteed To Hold Zero Against The Toughest Of Recoil.
A Lightweight 3.7 Ounces For The Inline Version To 3.9 Ounces For The Long Offset Version- 25% Lighter Than Our Previous Generation Slim Profile Series Scope Mounts.
Features
- All new rigid unibody design with strategically placed lightening cuts to reduce weight
- A lightweight 3.7 ounces for the inline version to 3.9 ounces for the long offset version- 25% lighter than our previous generation Slim Profile Series scope mounts
- Available in 2 different mount configurations allowing for optimum placement of your optic: Inline Rings and Offset Cantilever Rings. Available in 1 inch, 30 mm, and 34 mm diameter configurations.
- Mounts to any flat top Picatinny equipped rifle with custom Picatinny locking bolts that slot seamlessly into your Picatinny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil
- All Monstrum products are backed by a lifetime guarantee
- See more on Amazon...
Brand: Monstrum | Manufacturer: Monstrum
Weight: 0.27 Pounds
See On Amazon
Looking For Something Else?
Search