KEYESTUDIO 5V DCAC 4-Channel Relay Hat Shield Module Expansion Board for Raspberry Pi 4/A+/B+/Pi 2 Model B/Pi 3 Model B
Asin: B072XGF4Z3 | Ean: 0606184533138 | UPC: 606184533138
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Provides Installation Package, Source Code And Quick Start Guide Pdf.
Adopting Environmental-Friendly Raw Materials, Passed The United States Fcc Certification And The Eu Ce Certification.
With Functional Testing, Voltage And Current Testing, All Our Boards Are Fully Qualified Before Selling.
All The Channels Can Control Up To 24V Dc Or 250V Ac On 10 A.
Features
- This shield uses 4-channel relay, providing 4-way input and output. And works with Raspberry Pi A+/B+/Pi 2 Model B/Pi 3 Model B
- All the channels can control up to 24V DC or 250V AC on 10 A
- Provides installation package, source code and quick start guide PDF
- With functional testing, voltage and current testing, all our boards are fully qualified before selling
- Adopting environmental-friendly raw materials, passed the United States FCC certification and the EU CE certification
- See more on Amazon...
Brand: KEYESTUDIO | Manufacturer: keyes
Dimensions: 0.98 x 2.56 x 0.98 inches
See On Amazon Similar To KEYESTUDIO 5V DCAC 4Channel Relay
#1
KeeYees 5pcs 1 Channel 5V Relay Module Board Shield KY-019 LED Indicator for Arduino + 3pcs 20CM 10Pin Female Male Jumper Wires
Asin: B07L6J6FHH | Model: KYES504-KY019-5 | PartNumber: KYES504-KY019-5 | Ean: 0705883356380 | UPC: 705883356380
No Need To Buy The Jumper Wires Extra, This Set Contains 20Cm 10Pin Female To Female, Female To Male, Male To Male Dupont Jumper Wires, With Which You Can Easier To Complete The Project..
This Relay Can Be Used Not Only As A Microcontroller Development Board Module, But Also As A Home Appliance Controller..
Features
- The relay can directly control a variety of equipment and loads, which meets international safety standards, and also has power and relay indicators.
- This relay can be used not only as a microcontroller development board module, but also as a home appliance controller.
- No need to buy the Jumper Wires extra, this set contains 20cm 10Pin female to female, female to male, male to male Dupont Jumper Wires, with which you can easier to complete the project.
- See more on Amazon...
Brand: KeeYees | Manufacturer: KeeYees
See On Amazon #2
HiLetgo 2pcs 5V One Channel Relay Module Relay Switch with OPTO Isolation High Low Level Trigger
Asin: B00LW15A4W | Model: 3-01-0340 | PartNumber: 3-01-0340 | Ean: 0702082655948 | UPC: 702082655948
Fault-Tolerant Design, Even If The Control Line Is Broken, The Relay Will Not Move..
The Module Can Be Set By Jumper High Or Low Trigger..
The Interface Design Of Human Nature, All Interfaces Are Available Through A Direct Connection Terminal Leads, Very Convenient..
Using Smd Optocoupler Isolation, Strong Driving Capability, Stable Performance; Trigger Current 5Ma..
Features
- The module uses genuine quality relay, normally open interfaces , Maximum load: AC 250V/10A, DC 30V/10A.
- Using SMD optocoupler isolation, strong driving capability, stable performance; trigger current 5mA.
- Fault-tolerant design, even if the control line is broken, the relay will not move.
- The interface design of human nature, all interfaces are available through a direct connection terminal leads, very convenient.
- The Module can be set by jumper high or low trigger.
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #3
Teyleten Robot DC 1 Channel Optocoupler 3V/3.3V Relay High Level Driver Module Isolated Drive Control Board 3V/3.3V Relay Module for Arduino (Pack of 5)
Asin: B07XGZSYJV | Model: RK-S1B4-G97L | PartNumber: RK-S1B4-G97L | Ean: 0724545020568 | UPC: 724545020568
Optocoupler Isolator:3V/3.3V Power Relay Module Supports Photocoupler Isolation Control..
30Vdc 250Vac Load:The Power Switch Is Compatible With 10A 250Vac And 10A 30Vdc Load..
Features
- Original Songle Relay
- 30VDC 250VAC Load The power switch is compatible with 10A 250VAC and 10A 30VDC load.
- Optocoupler Isolator:3V/3.3V power relay module supports photocoupler isolation control.
- See more on Amazon...
Brand: Teyleten Robot | Manufacturer: Teyleten Robot
Dimensions: 0.79 x 2.76 x 0.67 inches | Weight: 0.00 pounds
Warranty: no
See On Amazon #4
5v Relay Module 1 Channel Relay Board for Raspberry Pi with Opto-Isolated High or Low Level Trigger 5v 1 Channel Relay Switch for Arduino
Asin: B09G6H7JDT | Ean: 0734914033952 | UPC: 734914033952
【Adopted Smd Optocoupler Isolation& Jumper Set】- The Isolation Circuit Prevent Damages To I / O Port By Relay Switch Current.The Module Has A Jumper So You Can Set Rather The Unit State Changes With High Or Low Signal. Has Screw Terminals For Relay (Nc,C,No) And For Input; Coil +, Coil - And Trigger..
【Humanization Design On Interfaces】- All Interfaces Can Be Directly Wired Out Through The Terminals.Fault-Tolerant Design;Fault-Tolerant Design,Even If The Control Line Is Broken, The Relay Will Not Operate..
【Wide Application】-These 5V Relay Board Works Well With Arm /Pic /Avr /Mcu/Raspberry/Cnc Machine/ Ps4 Etc..
【Main Specification】- Peak Load Of No Connector: Ac125~250V/10A, Dc28~30V/10A; Trigger Current: 5Ma;The Module Operating Voltage:12V; 4Pcs * 3.1 Mm Fixed Bolt Hole..
Features
- 5V 1 Channel Relay Module - This Relay Board provides a single relay that can be controlled by any 5V digital output from your microcontroller.
- Main Specification - Peak Load of NO Connector: AC125~250V/10A, DC28~30V/10A; Trigger Current: 5mA;The Module Operating Voltage:12V; 4pcs * 3.1 mm Fixed Bolt Hole.
- Adopted SMD Optocoupler Isolation& jumper Set - The isolation circuit prevent damages to I / O port by relay switch current.The module has a jumper so you can set rather the unit state changes with high or low signal. Has screw terminals for relay (NC,C,NO) and for input; Coil +, coil - and trigger.
- Wide Application -These 5v relay board works well with ARM /PIC /AVR /MCU/Raspberry/CNC machine/ PS4 etc.
- Humanization Design On Interfaces - All interfaces can be directly wired out through the terminals.Fault-tolerant design;fault-tolerant design,even if the control line is broken, the relay will not operate.
- See more on Amazon...
Brand: AZKO | Manufacturer: AZKO
Dimensions: 0.10 x 0.10 x 0.10 inches
See On Amazon #5
ANMBEST 2PCS 4 Channel 5V Relay Module with Optocoupler High or Low Level Trigger Expansion Board for Raspberry Pi Arduino
Asin: B08PP8HXVD | Model: ANMBEST_MD314-319 | PartNumber: ANMBEST_MD314-319 | Ean: 7903265708922
Reliable: Fault-Tolerant Design, Even If The Control Line Breaks, The Relay Will Not Move; With Optical Coupling Isolation, Triggering More Reliable, More Stable..
High/Low Level Trigger Can Be Selected By Jumper. Very Versatile, You Can Reverse The Input Logic With The Jumper..
Easy To Install: Equipped With Screwed Terminal Plate And Fixed Bolt Holes(Diameter: 3.1 Mm) On Both Sides For Easy Installation..
Equipped With High-Current Relay, Maximum Load: Ac250v 10A, 15A 125Vac, Dc30v 10A; Trigger Current Of Opto-Isolator: 5Ma..
Features
- It is 4 Channel Isolated 5V 10A Relay Module, each relay can individually switch on/off by an opto-isolated digital input, Standard interface can be directly connected with microcontrollers and be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, DSP, etc., very convenient.
- Equipped with high-current relay, maximum load: AC250V 10A, 15A 125VAC, DC30V 10A; Trigger current of opto-isolator: 5mA.
- RELIABLE: Fault-tolerant design, even if the control line breaks, the relay will not move; With optical coupling isolation, triggering more reliable, more stable.
- EASY to INSTALL: Equipped with screwed terminal plate and fixed bolt holes(diameter: 3.1 mm) on both sides for easy installation.
- High/Low level trigger can be selected by jumper. Very versatile, you can reverse the input logic with the jumper.
- See more on Amazon...
Brand: ANMBEST | Manufacturer: ANMBEST
See On Amazon #6
JBtek 4 Channel DC 5V Relay Module for Arduino Raspberry Pi DSP AVR PIC ARM
Asin: B00KTEN3TM | Model: 4450182 | PartNumber: 4450182 | Ean: 0520361134553 | UPC: 520361134553
Be Able To Control Various Appliances, And Other Equipments With Large Current.
Indication Led's For Relay Output Status.
Application:Supports All Mcu Control, The Industrial Field, Plc Control, Smart Home Control.
5V 4-Channel Relay Interface Board, And Each One Needs 50-60Ma Driver Current.
Features
- Equiped with high-current relay, AC250V 10A ; DC30V 10A
- 5V 4-Channel Relay interface board, and each one needs 50-60mA Driver Current
- Be able to control various appliances, and other equipments with large current
- Application Supports all MCU control, The industrial field, PLC control, Smart home control
- Indication LED's for Relay output status
- See more on Amazon...
Brand: JBtek | Manufacturer: JBtek
Dimensions: 0.79 x 2.56 x 1.97 inches | Weight: 0.02 pounds
See On Amazon #7
Tolako 5v Relay Module 5V Indicator Light LED 1 Channel Relay Module for Arduino ARM PIC AVR MCU
Asin: B00VRUAHLE | Model: BJ-DT0Y-001 | PartNumber: BJ-DT0Y-001 | Ean: 5175501214456
Control Dc Or Ac Signals Can Control The 220V Ac Load.
Useful To Control A Motor, A Led Strip, Or Any Other Module. How To Use It: Just Connect A Digital Output Of Your Board To Your Relay Module, And You Can Control A Power-Demanding Appliance With The Digital Signal.
There Is A Normally Open And Open Normally Closed Contact.
5V - 12 V Control Signal Of The Ttl.
Features
- Microcontroller development board can be used as modules, can be used as appliance control
- 5V - 12 V control signal of the TTL
- Control DC or AC signals can control the 220V AC Load
- There is a normally open and open normally closed contact
- Useful to control a motor, a led strip, or any other module. How to use it: Just connect a digital output of your board to your relay module, and you can control a power-demanding appliance with the digital signal
- See more on Amazon...
Brand: TOLAKO | Manufacturer: Tolako
See On Amazon #8
SunFounder Lab 4 Relay Module 5V 4 Channels Relay Module Compatible with Arduino R3 1280 Arm PIC AVR STM32
Asin: B00E0NSORY | Ean: 0520141421286 | UPC: 520141421286
Standard Interface That Can Be Controlled Directly By Microcontroller (Compatible With Arduino , 8051, Avr, Pic, Dsp, Arm, Arm, Msp430, Ttl Logic)..
Applications: Supports All Mcu Control, The Industrial Field, Plc Control, Smart Home Control, Vcc System Power And So On..
Indication Led’S For Relay Output Status..
Equiped With High-Current Relay, Ac250v 10A ; Dc30v 10A..
Features
- 5V 4-Channel Relay interface board, and each one needs 15-20mA Driver Current.
- Equiped with high-current relay, AC250V 10A ; DC30V 10A.
- Standard interface that can be controlled directly by microcontroller (Compatible with Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).
- Indication LED s for Relay output status.
- Applications: Supports all MCU control, The industrial field, PLC control, Smart home control, VCC system Power and so on.
- See more on Amazon...
Brand: SunFounder | Manufacturer: SunFounder
Dimensions: 0.80 x 3.20 x 2.90 inches | Weight: 0.09 Pounds
See On Amazon #9
Valefod DC 5V Relay Module 1-Channel Relay Switch with Optocoupler Isolation High/Low Level Trigger, Pack of 10
Asin: B07WQH63FB | Model: VA-0166 | PartNumber: VA-0166 | Ean: 0793118392173 | UPC: 793118392173
【Fault-Tolerant Design】The Relay Will Not Operate Even If The Control Line Is Disconnected..
【High Compatibility】The Relay Module Can Be Controlled Directly By 5V Logic Signals From Microcontroller(8051, Avr, Pic, Dsp, Arm, Raspberry Pi, Msp430, Ttl Logic Etc).
【Universal Interface】Equipped With Screwed Terminal Plate And Fixed Bolt Holes(Diameter: 3.1 Mm) On Both Sides For Easy Installation..
【Load Range】No(Normally Open) Maximum Load < Ac 250V/10A, < Dc 30V/10A. Trigger Current Of Opto-Isolator: 5Ma..
Features
- Control Devices The 1-channel relay module uses genuine high quality DC5V relay and SMD opto-isolator supporting high/low level trigger, widely apply to control various AC/DC appliances, and other devices with large current.
- Load Range NO(Normally open) maximum load < AC 250V/10A, < DC 30V/10A. Trigger current of opto-isolator: 5mA.
- Fault-tolerant Design The relay will not operate even if the control line is disconnected.
- Universal Interface Equipped with screwed terminal plate and fixed bolt holes(diameter: 3.1 mm) on both sides for easy installation.
- High Compatibility The relay module can be controlled directly by 5V logic signals from microcontroller(8051, AVR, PIC, DSP, ARM, Raspberry Pi, MSP430, TTL logic etc)
- See more on Amazon...
Brand: Valefod | Manufacturer: Valefod
See On Amazon #10
4 pcs DC 5V 1 Channel Relay Module Board Shield High/Low Level Trigger with Optocoupler
Asin: B079FJSYGY | Model: WJ-00010 | PartNumber: WJ-00010 | Ean: 6941595311734
Smd Optocoupler Isolation, Strong Driving Ability, Stable Performance; Trigger Current 5Ma.
The Module Can Be Set High Or Low Triggered By Jumper.
The Module Voltage 5V.
Maximum Load: Ac 250V/10A, Dc 30V/10A.
Features
- The module uses genuine quality relay, normally open interfaces
- Maximum load: AC 250V/10A, DC 30V/10A
- SMD optocoupler isolation, strong driving ability, stable performance; trigger current 5mA
- The module voltage 5V
- The module can be set high or low triggered by jumper
- See more on Amazon...
Brand: CHENBO | Manufacturer: CHENBO
See On Amazon #11
ARCELI 5PCS 5V One Channel Relay Module Board Shield 5v Relay Module for PIC AVR DSP ARM for Relay
Asin: B07BVXT1ZK | Model: 00075 | PartNumber: 00075 | Ean: 0613835617826 | UPC: 613835617826
New 5V Relay Module.
100% Brand New.
This Product Contains 5 Modules.
5V Relay Module 1 Way Relay Module.
Features
- Name: kits module
- 5V relay module 1 way relay module
- New 5V relay module
- This product contains 5 modules
- 100% brand new
- See more on Amazon...
Brand: ICQUANZX | Manufacturer: ARCELI
See On Amazon #12
Tnisesm/6pcs Coil DPDT PCB Power Relay DC 5V 8 Pins Mini Power Relay PCB Relay HK19F-8P-5V
Asin: B0874MC6D3 | Model: CAHK19F-8P-5V | PartNumber: CAHK19F-8P-5V
Number Of Pins : 8; Size (Approx.) : 2 X 1 X 1.4Cm / 0.8" X 0.4" X 0.6"(L*W*H); Weight : 51G; Package Content : 6 Pcs.
Warranty For 1 Year. If There Are Any Issues With Your Order, Please Contact Us..
Compact And Sealed Construction. Long Operational Life. The Relay Can Automatically Adjust, Protect And Transform The Circuit..
Coil Voltage : Dc5v; Contact Ratings: 1A 125Vac/2A 30Vdc; 2No 2Nc.
Features
- Product Name : PCB Power Relay; Model : HK19F
- Coil Voltage : DC5V; Contact Ratings: 1A 125VAC/2A 30VDC; 2NO 2NC
- Number of Pins : 8; Size (Approx.) : 2 x 1 x 1.4cm / 0.8 x 0.4 x 0.6(L*W*H); Weight : 51g; Package Content : 6 Pcs
- Compact and sealed construction. Long operational life. The relay can automatically adjust, protect and transform the circuit.
- Warranty for 1 year. If there are any issues with your order, please contact us.
- See more on Amazon...
Brand: Tnisesm | Manufacturer: Tnisesm
See On Amazon #13
ELEGOO 4 Channel DC 5V Relay Module with Optocoupler Compatible with Arduino UNO R3 MEGA 2560 DSP ARM PIC AVR STM32
Asin: B09ZQS2JRD
Working Status Indicator Lights Are Conducive To The Safe Use.
Widely Used For All Mcu Control, Industrial Sector, Plc Control, Smart Home Control. For A Complete Data Sheet For This Relay Board, Please Download It From: Http://Dwz.Win/Uhw.
4-Channel Relay Interface Board, Which Can Be Controlled Directly By A Wide Range Of Microcontrollers Such As Arduino, Avr, Pic, Arm, Plc, Etc. It Is Also Able To Control Various Appliances And Other Equipments With Large Current..
Standard Interface Can Be Directly Connected With Microcontrollers..
Features
- This relay module is 5V active low. Relay output maximum contact is AC250V 10A and DC30V 10A.
- Standard interface can be directly connected with microcontrollers.
- Working status indicator lights are conducive to the safe use
- 4-channel relay interface board, which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, PLC, etc. It is also able to control various appliances and other equipments with large current.
- Widely used for all MCU control, industrial sector, PLC control, smart home control. For a complete data sheet for this relay board, please download it from: http://dwz.win/UhW
- See more on Amazon...
Brand: ELEGOO | Manufacturer: ELEGOO
See On Amazon #14
Huayao 2pcs 8 Channel DC 5V Relay Module with Optocoupler for UNO R3 MEGA 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi
Asin: B08V4YNSYK | Model: HY027 | PartNumber: HY027 | Ean: 0192881982732 | UPC: 192881982732
Brand: Huayao | Manufacturer: Huayao
See On Amazon #15
Hosyond 4Pack 4 Channel DC 5V Relay Module with Optocoupler Relay Board for Arduino Raspberry Pi MEGA2560
Asin: B0C2Z8JF5R | Ean: 0732214748170 | UPC: 732214748170
High Level Or Low Level Trigger. Pull In At Low Level And Release At High Level. The Status Indicator Is On When It Is Pull In, And It Is Release When It Is Released..
Widely Used In All Mcu Control, Industrial Fields, Plc Control, Smart Home Control..
The 4 Channel Relay Interface Board Can Directly Control Arduino, Avr, Pic, Arm, Plc And Other Microcomputers, And Can Also Control Various High-Current Electrical Appliances And Other Equipment..
The Relay Has A Standard Interface And Can Be Directly Connected To The Microcontroller, Which Is Convenient For Wiring. Package Contains 10Pin Male To Female Dupont Wires..
Features
- The power supply voltage of the relay module is DC5V. The maximum output load is AC250V 10A and DC30V 10A.
- The relay has a standard interface and can be directly connected to the microcontroller, which is convenient for wiring. Package contains 10pin male to female DuPont wires.
- High Level or Low Level Trigger. Pull in at low level and release at high level. The status indicator is on when it is pull in, and it is release when it is released.
- The 4 channel relay interface board can directly control Arduino, AVR, PIC, ARM, PLC and other microcomputers, and can also control various high-current electrical appliances and other equipment.
- Widely used in all MCU control, industrial fields, PLC control, smart home control.
- See more on Amazon...
Brand: Hosyond | Manufacturer: Hosyond
Warranty: NO
See On Amazon #16
AEDIKO 4pcs DC 5V Relay Module 2 Channel Relay Board with Optocoupler Support High or Low Level Trigger
Asin: B099MC4TJD | Model: AE06233 | PartNumber: AE06233 | Ean: 0701715485006 | UPC: 701715485006
5V Relay Module Is 2 Channel Isolated, Each Relay Can Individually Switch On/Off By An Opto-Isolated Digital Input.
2 Channel Module Equipped With Screwed Terminal Plate And Fixed Bolt Holes,Standard Interface Can Connect With Microcontrollers And Be Controlled By A Wide Range Of Microcontrollers.
Relay Module Designed With Fault-Tolerant , Even If The Control Line Breaks, The Relay Will Not Move; With Optical Coupling Isolation,Triggering More Reliable And Stable.
2 Channel Relay Module 5V Comes With High-Current Relay,Trigger Current : 5Ma.
Features
- 2 Channel Relay Module Voltage : 5V; Normally Open Interfaces Maximum Load : AC 250V/10A, DC 30V/10A
- 2 Channel Relay Module 5V Comes with High-Current Relay,Trigger Current : 5mA
- 5V Relay Module is 2 Channel Isolated, Each Relay Can Individually Switch On/Off by An Opto-Isolated Digital Input
- Relay Module Designed With Fault-Tolerant , Even If The Control Line Breaks, The Relay Will Not Move; With Optical Coupling Isolation,Triggering More Reliable and Stable
- 2 Channel Module Equipped With Screwed Terminal Plate and Fixed Bolt Holes,Standard Interface Can Connect With Microcontrollers and be Controlled by a Wide Range of Microcontrollers
- See more on Amazon...
Brand: AEDIKO | Manufacturer: AEDIKO
Dimensions: 0.70 x 2.00 x 1.00 inches
See On Amazon #17
HiLetgo 12V 4 Channel Relay Module with OPTO-Isolated Support High and Low Level Trigger
Asin: B00LW2GM84 | Model: 3-01-0371 | PartNumber: 3-01-0371 | Ean: 0702082656167 | UPC: 702082656167
High And Low Level Trigger.
Using Smd Optocoupler Isolation.
Features
- HiLetgo 12V 4 Channel Relay Module
- Using SMD OPTOCOUPLER isolation
- High and Low Level Trigger
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #18
AEDIKO 4pcs DC 5V Relay Module 1 Channel Relay Switch Relay Board with Optocoupler Isolation Support High or Low Level Trigger
Asin: B095YD3732 | Ean: 0701715480582 | UPC: 701715480582
Optocoupler Isolation:1 Channel Relay Board Use Optocoupler Isolation That Has Strong Driving Ability And Stable Performance ,The Isolation Circuit Prevent Damages To I / O Port By Relay Switch Current.
Wide Application: Dc 5V Relay Module Works Well With Arm /Pic /Avr /Mcu/Raspberry/Cnc Machine/ Ps4 Etc..
Jumper Design: The Relay Module Has A Jumper That You Can Set Rather The Unit State Changes With High Or Low Signal. Has Screw Terminals For Relay (Nc,C,No) And For Input; Coil +, Coil - And Trigger..
Fault-Tolerant Design: Fault Tolerant Design, Even If The Control Line Is Broken, The Relay Will Not Operate;All Interfaces Of Relay Can Be Wired Out Through The Terminals Directly,Normally Open And Normally Closed.
Features
- 5V Relay Module: Working Voltage: DC 5V; Maximum Load: AC 250V/10A, DC 30V/10A; Trigger Current of Opto-Isolator: 5mA
- Fault-Tolerant Design: Fault Tolerant Design, Even if the Control Line is Broken, the Relay will not Operate;All Interfaces of Relay can be Wired Out Through the Terminals Directly,Normally Open and Normally Closed
- Optocoupler Isolation:1 Channel Relay Board use Optocoupler Isolation that has Strong Driving Ability and Stable Performance ,The Isolation Circuit Prevent Damages to I / O Port by Relay Switch Current
- Jumper Design: The Relay Module has a Jumper That You Can Set Rather the Unit State Changes with High or Low Signal. Has Screw Terminals for Relay (NC,C,NO) and for Input; Coil +, Coil - and Trigger.
- Wide Application: DC 5V Relay Module Works Well with ARM /PIC /AVR /MCU/Raspberry/CNC Machine/ PS4 etc.
- See more on Amazon...
Brand: AEDIKO | Manufacturer: AEDIKO
Dimensions: 0.72 x 1.90 x 1.02 inches
See On Amazon #19
HiLetgo 12V 8 Channel Relay Module with OPTO-Isolated High and Low Level Trigger 8 Ways Relay Switch Module for Arduino
Asin: B00LW2GA5Y | Model: 3-01-0348 | PartNumber: 3-01-0348 | Ean: 0702082656006 | UPC: 702082656006
The Module Can Be High Or Low By A Jumper Setting Trigger;.
The Power Indicator (Green), The Relay Status Indicator (Red)..
Fault-Tolerant Design, Even If The Control Line Is Broken, The Relay Will Not Operate;.
The Module Operating Voltage 12V;.
Features
- 12V 8 Channel Relay Module With OPTO-Isolated High And Low Level Trigger
- The module Operating voltage 12V;
- The module can be high or low by a jumper setting trigger;
- Fault-tolerant design, even if the control line is broken, the relay will not operate;
- The power indicator (green), the relay status indicator (red).
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
Weight: 0.11 pounds
See On Amazon #20
HiLetgo 5V 8 Channel Relay Module with OPTO-Isolated Support High and Low Level Trigger
Asin: B00LX3UH9C | Model: 3-01-0382 | PartNumber: 3-01-0382 | Ean: 0702082656273 | UPC: 702082656273
Using Smd Optocoupler Isolation.
The Module Voltage Is 5V, 9,12 V, 24V.
Features
- HiLetgo 5V 8 Channel Relay Module
- the module voltage is 5V, 9,12 V, 24V
- Using SMD OPTOCOUPLER isolation
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon
Looking For Something Else?
Search