Downdraft Table, 110V, 10.0A/hr., 60 Hz
Asin: B076HB6L8H | Ean: 7431957580254
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Features
- Price For: Each Voltage: 110 Filter Rating: 5 Microns Overall Depth: 28" Vacuum Suction: 1790 cfm Amps AC: 10.0 Item: Downdraft Table Hz: 60 For Use With: Metal Surfaces Phase: 1 HP: 1/2 Overall Height: 37" Overall Width: 66" Country of Origin (subject to change): China
- See more on Amazon...
Brand: Baileigh | Manufacturer: BAILEIGH INDUSTRIAL
See On Amazon Similar To Downdraft Table 110V 10.0A hr.
#1
Kikerike 10 Inch Draft Blocker Backdraft Damper Duct Draft Stopper One-Way Airflow Ducting Insert Backflow Preventer Inline Fan Vent Deflector
Asin: B09WHTHJ2H
【Function】This Airflow Regulating Backdraft Shutter Fits Over The Td Lip And Is Designed To Improve Ventilation By Preventing Air From Re-Circulating When The Fans Are Not In Use..
【Note】Back Draught Valves Can Be Inserted Into Ventilation Ducts Which Are Flexible Or Non Flexible. Cannot Be Used With Plastic Ducts As The Sizes Are Different. All Dimensions Are Measured Manually, Please Allow 1-3Mm Differences..
【Wide Application】 These Backdraft Dampers Can Be Widely Used In Acs, Exhaust Fans, Extractors, Range Hoods, Heating Ducts, Vents And Other Residential, Commercial And Industrial Applications..
【Installation】The Backdraft Damper Is Installed By Pushing It Into The Ventilation Pipe As Far As It Will Go. The Position Of The Spring Should Be Horizontal When The Flap Is Installed Horizontally So That It Can Be Opened And Closed Optimally. This Also Applies To The Vertical Installation..
Features
- Material The 10 inch backdraft damper is made of a Galvanized steel, the flap leaves are made of aluminum, while the Axis and spring are made of stainless steel.
- Installation The backdraft damper is installed by pushing it into the ventilation pipe as far as it will go. The position of the spring should be horizontal when the flap is installed horizontally so that it can be opened and closed optimally. This also applies to the vertical installation.
- Function This airflow regulating backdraft shutter fits over the TD lip and is designed to improve ventilation by preventing air from re-circulating when the fans are not in use.
- Wide Application These backdraft dampers can be widely used in ACs, exhaust fans, extractors, range hoods, heating ducts, vents and other residential, commercial and industrial applications.
- Note Back draught valves can be inserted into ventilation ducts which are flexible or non flexible. Cannot be used with plastic ducts as the sizes are different. All dimensions are measured manually, please allow 1-3mm differences.
- See more on Amazon...
Brand: Kikerike | Manufacturer: Kikerike
See On Amazon #2
Hon&Guan 10 inch Backdraft Damper, One-Way Airflow Ducting Insert Backflow Preventer Duct Draft Blocker, HVAC Inline Fan Vent
Asin: B09WDGNRHT
【Wide Applications】Back Draught Valves Can Be Inserted Into Hvac Ducting Which Are Flexible Or Non-Flexible. Designed For Use With Range Hoods, Bathroom Fans, Kitchen And Other Home Hvac Applications..
【Backdraft Shutter】Hon&Guan Draft Blocker Designed To Improve Ventilation By Preventing Air From Re-Circulating When The Fans Are Not In Use, Rubber Ring Ensure 100% Closure And Quiet Closing..
【Lightweight Valve Wings】The Valve Wings Open Under The Pressure Created By The Airflow; When The Air Flows In The Opposite Direction, It Is Automatically Closed Under The Action Of The Spring, So As To Cut Off The Flow..
【Installation Method】The 10 Inch Backdraft Damper Has An Opening Of 250Mm And A Length Of 128Mm. When Installed Horizontally, The Springs Should Be Positioned Horizontally To Allow For Optimal Opening And Closing..
Features
- Material The 10 duct damper and the flap leaves is made of a Galvanized steel to withstand temperatures up to 140 F, the Axis are made of aluminum, while the spring are made of carbon steel.
- Installation method The 10 inch backdraft damper has an opening of 250mm and a length of 128mm. When installed horizontally, the springs should be positioned horizontally to allow for optimal opening and closing.
- Wide applications Back draught valves can be inserted into hvac ducting which are flexible or non-flexible. Designed for use with range hoods, bathroom fans, kitchen and other home HVAC applications.
- Lightweight valve wings The valve wings open under the pressure created by the airflow; when the air flows in the opposite direction, it is automatically closed under the action of the spring, so as to cut off the flow.
- Backdraft Shutter Hon&Guan Draft Blocker designed to improve ventilation by preventing air from re-circulating when the fans are not in use, rubber ring ensure 100% closure and quiet closing.
- See more on Amazon...
Brand: Hon&Guan | Manufacturer: Hon&Guan
Dimensions: 5.03 x 5.03 x 9.84 inches | Weight: 1.10 pounds
See On Amazon #3
Draft Blocker - 10'' Inch Backdraft Damper Duct - Draft Stopper - Backflow Preventer - Inline Fan Vent - Vent Deflector (10'' Inch)
Asin: B08FBCVNN5 | Ean: 4605098011363
Installation: The Backflow Flap Is Installed By Inserting It Into The Ventilation Pipe Until It Stops. The Position Of The Spring Should Be Horizontal For Horizontal Installations So That It Can Open And Close Optimally. The Backdraft Shutter Is Installed So That The Damper Blades Open Only In The Outflowing Air Direction..
Back Draught Valves Can Be Inserted Into Ventilation Ducts Which Are Flexible Or Non Flexible. Cannot Be Used With Plastic Ducts As The Sizes Are Different..
The Backflow Flap Opens And Closes Automatically At Low Air Volumes. It Has A Smooth-Running Spring And An Internal Foam Strip To Keep The Blades From Rattling And Can Be Installed Horizontally Or Vertically.
Damper Has 2 Valves, Designed For Use In Air Conditioners (Ac), Dryers, Exhaust, Extractor Or Range Hoods, Heating Ducts, Vents And Other Hvac Applications.
Features
- Back draft damper is made for insertion into inch ventilation ducts. The backflow damper RKI opens and closes automatically. It has a strong spring and can be installed either horizontally or vertically. The flap is suitable for retrofitting, since it is completely inside the duct
- Damper has 2 valves, designed for use in air conditioners (AC), dryers, exhaust, extractor or range hoods, heating ducts, vents and other HVAC applications
- INSTALLATION: The backflow flap is installed by inserting it into the ventilation pipe until it stops. The position of the spring should be horizontal for horizontal installations so that it can open and close optimally. The Backdraft shutter is installed so that the damper blades open only in the outflowing air direction.
- The backflow flap opens and closes automatically at low air volumes. It has a smooth-running spring and an internal foam strip to keep the blades from rattling and can be installed horizontally or vertically
- Back draught valves can be inserted into ventilation ducts which are flexible or non flexible. Cannot be used with plastic ducts as the sizes are different.
- See more on Amazon...
Brand: ERA Group | Manufacturer: ERA Group
See On Amazon #4
Broan-NuTone 273603 Eclipse Range Hood with Stainless Steel Cover, 500 CFM, 36-Inch Downdraft
Asin: B00074TB8Q | Model: 273603 | PartNumber: 273603 | Ean: 0026715052981 | UPC: 026715052981
Space Saving Design: The Unique Design Lets You Make The Most Of Precious, Under-Counter Cabinet Space.
One Year Limited : Downdraft Hood Is Backed By A One Year Limited.
Adjustable Speed Control: Speed Control Is Flush With The Side Of The Unit And Blower Discharges Right, Left, Or Down And Slides Side-To-Side For Easy Installation.
Compatible: This Broan Downdraft Is Compatible With Virtually All Self-Contained Cooktops.
Features
- STAINLESS STEEL DOWNDRAFT RANGE HOOD: 500 CFM blower quickly pulls smoke and odors from your kitchen air
- COMPATIBLE: This Broan downdraft is compatible with virtually all self-contained cooktops
- SPACE SAVING DESIGN: The unique design lets you make the most of precious, under-counter cabinet space
- ADJUSTABLE SPEED CONTROL: Speed control is flush with the side of the unit and blower discharges right, left, or down and slides side-to-side for easy installation
- ONE YEAR LIMITED : Downdraft hood is backed by a one year limited
- See more on Amazon...
Brand: Broan-NuTone | Manufacturer: Broan-NuTone
Dimensions: 29.50 x 7.00 x 36.00 inches | Weight: 37.08 Pounds
Warranty: 1 Year
See On Amazon #5
Shop Fox W1734A 15-Inch by 25-Inch Downdraft Sanding Table
Asin: B0007D2DP0 | Model: W1734A | PartNumber: W1734A | Ean: 0784497293465, 0754001007345, 0756655547970 | UPC: 754001007345, 784497293465, 756655547970
2-1/2-Inch Dust Port.
Brand: Shop Fox | Manufacturer: Shop Fox
Dimensions: 7.00 x 27.70 x 17.60 inches | Weight: 13.40 pounds
See On Amazon #6
Broan 273003 30" Stainless Steel 500 CFM Downdraft with Stainless Steel Cover
Asin: B000HJIPB0 | Model: 273003 | PartNumber: 273003 | Ean: 0026715052974 | UPC: 026715052974
Two Washable Aluminum Grease Filters.
30-Inch Width By 2-Inch Depth By 29.5-Inch Height.
Infinitely Adjustable Variable Speed Slide Control Is Flush With The Side Of The Unit.
Automatically Raises Into Position And Turns Unit On With The Touch Of A Button. Disappears Flush With The Cooktop Surface.
Features
- 500 cfm interior blower
- Automatically raises into position and turns unit on with the touch of a button. Disappears flush with the cooktop surface
- Two washable aluminum grease filters
- Infinitely adjustable variable speed slide control is flush with the side of the unit
- 30-inch width by 2-inch depth by 29.5-inch height
- See more on Amazon...
Brand: Broan-NuTone | Manufacturer: Broan
Dimensions: 29.50 x 7.00 x 36.00 inches | Weight: 76.00 pounds
Warranty: One-year limited warranty
See On Amazon #7
10 Inch Backdraft Damper, HG Power Draft Blocker One-Way Airflow Stopper Backflow Preventer for HVAC Ducting, Inline Fan, Dryer, Exhaust Hood, Bathroom, 250mm, Silver
Asin: B09WDMXXSQ
Easy Installation - Installing The Backdraft Damper Is Straightforward; However, Caution Is Advised During Installation To Protect Your Hands. When Mounting The Flap Horizontally, Ensure That The Position Of The Spring Is Also Horizontal For Optimal Opening And Closing Functionality..
Cost-Effective Solution - Hg Power's Backdraft Dampers Present A Dependable And Enduring Solution That Minimizes Upkeep Costs And Safeguards Your Investment Across A Broad Spectrum Of Residential, Commercial, And Industrial Uses..
Wide Application - These Backdraft Dampers Find Extensive Application In A Variety Of Systems Including Ac Units, Exhaust Fans, Extractors, Range Hoods, Heating Ducts, Vents, And More Across Residential, Commercial, And Industrial Settings..
Unique Function - Backdraft Dampers Enable One-Way Airflow Without Necessitating An Actuator. In The Long Term, These Dampers Can Save You Both Time And Money. They Are Essential For Installations Where Air Flow Is Required To Move In A Single Direction, Such As At Intake And Exhaust Points Within Your System..
Features
- Premium Material - The HG Power backdraft damper is constructed from stainless iron, renowned for its corrosion resistance and minimal deformation properties. It is available in four sizes to choose from 4/6/8/10 inches, allowing you to select the right size damper to avoid compatibility issues.
- Unique Function - Backdraft dampers enable one-way airflow without necessitating an actuator. In the long term, these dampers can save you both time and money. They are essential for installations where air flow is required to move in a single direction, such as at intake and exhaust points within your system.
- Easy Installation - Installing the backdraft damper is straightforward; however, caution is advised during installation to protect your hands. When mounting the flap horizontally, ensure that the position of the spring is also horizontal for optimal opening and closing functionality.
- Wide Application - These backdraft dampers find extensive application in a variety of systems including AC units, exhaust fans, extractors, range hoods, heating ducts, vents, and more across residential, commercial, and industrial settings.
- Cost-Effective Solution - HG Power's backdraft dampers present a dependable and enduring solution that minimizes upkeep costs and safeguards your investment across a broad spectrum of residential, commercial, and industrial uses.
- See more on Amazon...
Brand: HG Power | Manufacturer: HG POWER
See On Amazon #8
Vent Systems - 10 Inch Backdraft Damper - One-Way Airflow - Inline Fan Vent Deflector
Asin: B08ZDM7X89 | Ean: 4751037231955
Designed For Use In Ac, Dryer Vent, Exhaust, Extractor Or Range Hoods, Heating Systems, Fans, Vents And Other Residential, Commercial And Industrial Hvac Applications. Best To Use With Vent Systems Hvac Parts..
The Backflow Preventer Valve Is Installed By Pushing It Into The Ventilation Pipe As Far As It Will Go. The Position Of The Spring Should Be Horizontal When The Flap Is Installed Horizontally So That It Can Be Opened And Closed Optimally. This Also Applies To The Vertical Installation..
Duct Draft Stopper Prevent Cold Air Or Wind From Entering The Ventilation Pipe. In This Case, The Flap Is Installed In Such A Way That The Flap Leaves Only Open Into The Outgoing Air Direction. This Means That No Cold Air / Wind Or Smell Can Penetrate The Ventilation Pipe From The Outside..
A Tight Sealing And Fastening Of The Duct Is Achieved By The Rubber Strip Attached To The Inside Of The Draft Blocker Damper. The Rubber Seal Prevents Loud Rattling When The Flap Blades Open And Close. The Housing Of The Flap Is Made Of Galvanized Steel, The Flap Blades Are Made Of Aluminum, The Axle And Spring Are Made Of Stainless Steel.
Features
- Back draft damper for insertion into 10 inch ventilation ducts. The backflow damper opens and closes automatically. It has a strong spring and can be installed either horizontally or vertically. The flap is suitable for retrofitting, since it is completely inside the duct
- A tight sealing and fastening of the duct is achieved by the rubber strip attached to the inside of the draft blocker damper. The rubber seal prevents loud rattling when the flap blades open and close. The housing of the flap is made of galvanized steel, the flap blades are made of aluminum, the axle and spring are made of stainless steel
- Designed for use in AC, dryer vent, exhaust, extractor or range hoods, heating systems, fans, vents and other residential, commercial and industrial HVAC applications. Best to use with VENT SYSTEMS hvac parts.
- Duct draft stopper prevent cold air or wind from entering the ventilation pipe. In this case, the flap is installed in such a way that the flap leaves only open into the outgoing air direction. This means that no cold air / wind or smell can penetrate the ventilation pipe from the outside.
- The backflow Preventer valve is installed by pushing it into the ventilation pipe as far as it will go. The position of the spring should be horizontal when the flap is installed horizontally so that it can be opened and closed optimally. This also applies to the vertical installation.
- See more on Amazon...
Brand: Vent Systems | Manufacturer: Vent Systems
See On Amazon #9
Vent Systems 10'' Inch Backdraft Damper - Backflow Shutter - Heavy-Duty Inline Springs - One-Way Airflow Ducting Insert - Inline Fan Vent Deflector
Asin: B08M693CSC | Ean: 4751037231955, 4751037231207
Designed For Use In Ac, Dryer Vent, Exhaust, Extractor Or Range Hoods, Heating Systems, Fans, Vents And Other Residential, Commercial And Industrial Hvac Applications. Best To Use With Vent Systems Hvac Parts..
The Backflow Preventer Valve Is Installed By Pushing It Into The Ventilation Pipe As Far As It Will Go. The Position Of The Spring Should Be Horizontal When The Flap Is Installed Horizontally So That It Can Be Opened And Closed Optimally. This Also Applies To The Vertical Installation..
Duct Draft Stopper Prevent Cold Air Or Wind From Entering The Ventilation Pipe. In This Case, The Flap Is Installed In Such A Way That The Flap Leaves Only Open Into The Outgoing Air Direction. This Means That No Cold Air / Wind Or Smell Can Penetrate The Ventilation Pipe From The Outside..
A Tight Sealing And Fastening Of The Duct Is Achieved By The Rubber Strip Attached To The Inside Of The Draft Blocker Damper. The Rubber Seal Prevents Loud Rattling When The Flap Blades Open And Close. The Housing Of The Flap Is Made Of Galvanized Steel, The Flap Blades Are Made Of Aluminum, The Axle And Spring Are Made Of Stainless Steel.
Features
- Back draft damper for insertion into 10 inch ventilation ducts. The backflow damper opens and closes automatically. It has a strong spring and can be installed either horizontally or vertically. The flap is suitable for retrofitting, since it is completely inside the duct
- A tight sealing and fastening of the duct is achieved by the rubber strip attached to the inside of the draft blocker damper. The rubber seal prevents loud rattling when the flap blades open and close. The housing of the flap is made of galvanized steel, the flap blades are made of aluminum, the axle and spring are made of stainless steel
- Designed for use in AC, dryer vent, exhaust, extractor or range hoods, heating systems, fans, vents and other residential, commercial and industrial HVAC applications. Best to use with VENT SYSTEMS HVAC parts.
- Duct draft stopper prevent cold air or wind from entering the ventilation pipe. In this case, the flap is installed in such a way that the flap leaves only open into the outgoing air direction. This means that no cold air / wind or smell can penetrate the ventilation pipe from the outside.
- The backflow Preventer valve is installed by pushing it into the ventilation pipe as far as it will go. The position of the spring should be horizontal when the flap is installed horizontally so that it can be opened and closed optimally. This also applies to the vertical installation.
- See more on Amazon...
Brand: Vent Systems | Manufacturer: Vent Systems
Dimensions: 5.04 x 9.80 x 9.80 Inches | Weight: 18.70 ounces
See On Amazon #10
ECOPRO VENT - 10" Inch Backdraft Damper for Straight or Flex Duct. Bathroom Exhaust Fan. Kitchen Hood Exhaust Fan and Different Dryer Fan Backflow Preventer. Steel Damper with Aluminum Valve Flaps
Asin: B08XXSWMNS | Ean: 5068640646533
Quick And Easy To Assemble - Diy Press On Chosen Duct - Flex Or Straight - And By Using Montage Glue. Tape Or Steel Clamps Tighten The Connection..
Heat-Resistant From: -22 °F To 400°F. / Perfect For Indoor And Outdoor Use.
Perfect For Heating, Cooling Or Air Conditioning - Hvac. Bathroom And Kitchen Air Exhaust..
For Use With The Ø10 Inch Round Flexible Or Straight Pipe Ducting Systems.
Features
- 10 Inch steel backdraft damper with aluminum valve.
- For use with the 10 Inch Round flexible or straight Pipe Ducting systems
- Quick and easy to assemble - DIY Press on chosen duct - flex or straight - and by using montage glue. tape or steel clamps tighten the connection.
- Perfect for heating, cooling or air conditioning - HVAC. Bathroom and kitchen air exhaust.
- Heat-resistant from: -22 F to 400 F. / Perfect for indoor and outdoor use
- See more on Amazon...
Brand: ECOPRO VENT
See On Amazon #11
POWERTEC 75049 Downdraft Table Panel Kit, 2-Pack
Asin: B07DVK77Y2 | Model: 75049 | PartNumber: 75049 | Ean: 0843441100201 | UPC: 843441100201
Features: Removable Orange Work Stops, A Hole Grid Pattern Intended For Optimal Suction, And An Ergonomically Functional Design For A Stable Work Surface.
Dimensions: 6-11/16” X 16-1/2” X 13/16” (Panel W X L X Side Flange).
Premium Build: Each Table Panel Is Made With High Quality Powder Coated Steel For Long-Term Durability, And Comes Equipped With Cushioned, Non-Marring (& Anti-Slip) Rubber Grommets Designed To Protect Your Stock From Unintentional Marking.
Function: Kit Gives You The Basic Necessities To Build A Quality And Effective Downdraft Sanding Table From The Ground Up, Helping To Control And Eliminate Shop Dust At A Fraction Of The Cost.
Features
- INCLUDES: (2) Downdraft Table Panels
- FUNCTION: Kit gives you the basic necessities to build a quality and effective downdraft sanding table from the ground up, helping to control and eliminate shop dust at a fraction of the cost
- FEATURES: Removable orange work stops, a hole grid pattern intended for optimal suction, and an ergonomically functional design for a stable work surface
- PREMIUM BUILD: Each table panel is made with high quality powder coated steel for long-term durability, and comes equipped with cushioned, non-marring (& anti-slip) rubber grommets designed to protect your stock from unintentional marking
- DIMENSIONS: 6-11/16 x 16-1/2 x 13/16 (Panel W x L x Side Flange)
- See more on Amazon...
Brand: POWERTEC | Manufacturer: POWERTEC
Dimensions: 1.50 x 17.00 x 7.00 inches | Weight: 3.26 pounds
See On Amazon
Looking For Something Else?
Search