Creality Original Ender 3 Nozzle Fan DC BRUSHLESS PD04010MS4 DC 24V 0.10A Cooling Fan 40mmx40mmx10mm 4010 Sleeve Bearing for 3D Printer
Asin: B07TGMG4VZ | Model: ENO-ender3-fan | PartNumber: ENO-ender3-fan | Ean: 0705300791268 | UPC: 705300791268
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Operation Voltage: Dc 24V.
40X40x10mm.
Use For: Creality Ender-3/Ender-3 Pro/Ender-5.
Features
- It's 100% Creality Original
- Use For: Creality Ender-3/Ender-3 pro/Ender-5
- Operation Voltage: DC 24V
- 40x40x10MM
- See more on Amazon...
Brand: ENOMAKER | Manufacturer: Creality 3D
Dimensions: 0.00 x 0.00 x 1.57 Inches | Weight: 0.02 pounds
See On Amazon Similar To Creality Original Ender 3 Nozzle
#1
Creality Original Ultra Removable Magnetic 3D Printer Build Surface Heated Bed Cover for Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 V2 Neo/Ender 3 Neo/Ender 3 S1/3 S1 Pro/Ender 5 Pro 235X235mm (1)
Asin: B07X3WBNPX
Easy Model Removal: The First 3D Printing Surface Designed With Model Removal In Mind. This Surface Is Easily Removed, And Flexible. Simply Print On The Surface, Remove The Upper Magnetic Surface From The Lower, Bend The Flexible Surface And Watch The Model Fall Right Into Your Hands..
Simple Installation & Universal: Build Surface Comes With Upper Magnetic Build Surface And Lower Magnetic Adhesive Base. Place Lower 3M Adhesive Surface On Top Of Normal Build Plate.Works With All Fdm Printer Models, And All Heated And Non-Heated 3D Printer Beds..
Customizable: The Flexible Surface Can Easily Be Cut To Any Demensions Making It Perfect For All Build Sizes And All Fdm Printer Models..
All New Functionality: Introducing The First Ever Removable, Magnetically Secured, Build Surface For Hassle Free Model Removal.It Is Recommended To Heat The Hot Bed For 2-3 Minutes Before Removing The Model With The Removal Tools..
Features
- ATTENTION BEFORE USE Firstly, please make sure the bottom of the soft magnetic sticker and the top layer are firmly adsorbed before installation. If it cannot be adsorbed, please rotate it 90 degrees and try again until they are completely adsorbed and will not separate. Secondly, after finding the correct magnetic direction, then you can stick the bottom part on the hot bed. Please pay attention to the direction before installation.
- ALL NEW FUNCTIONALITY: Introducing the first ever removable, magnetically secured, build surface for hassle free model removal.It is recommended to heat the hot bed for 2-3 minutes before removing the model with the removal tools.
- EASY MODEL REMOVAL: The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.
- CUSTOMIZABLE: The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models.
- SIMPLE INSTALLATION & UNIVERSAL: Build surface comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate.Works with all FDM printer models, and all heated and non-heated 3D printer beds.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Dimensions: 0.08 x 9.25 x 9.25 Inches | Weight: 0.55 Pounds
See On Amazon #2
OVERTURE TPU Filament 1.75mm Flexible TPU Roll, 95A Soft 3D Printer Filament, 1kg Spool (2.2 lbs), Dimensional Accuracy +/- 0.02 mm (TPU Black)
Asin: B07VDP2S3P | Model: OVTPU175 | PartNumber: OVTPU175 | Ean: 0810031290291 | UPC: 810031290291
【Clog-Free & Bubble-Free】 Designed And Manufactured With Our Patented Clog-Free Formula To Guarantee A Smooth And Seamless Printing Experience. All Spools Undergo Thorough Drying For 24 Hours Before Packaging And Are Vacuum-Sealed In Resealable Foil Packaging. To Maintain Optimal Performance, Store Tpu Filament In Sealed Storage With Desiccants (Silica Gel) Or Dry For >8 Hours At 65˚C.
【Risk-Free & Lifetime Guarantee】 Discover Worry-Free 3D Printing With Overture Filament—Backed By Our Lifetime Satisfaction Guarantee. No Matter The Challenges, We're Here To Support You For A Seamless 3D Printing Experience. Trust Overture As Your Dependable Supplier Of 3D Printing Filaments And Accessories.
【Wide Compatibility And Color Selection】 Overture Filaments Seamlessly Integrates With Most Consumer And Industrial 3D Printers. Explore Your Creative Side With Our Extensive Selection Of Vibrant Colors, Ensuring A Spectrum Of Possibilities For Your Unique Creations.
【Excellent Layer Adhesion】 Setting The Standard For Impeccable Layer Adhesion And Delivering Impressive Results. Overture Tpu Features Optimal Layer Bonding And A Flawlessly Smooth Finish.
Features
- High-Quality TPU Material Engineered for unparalleled flexibility and durability. Featuring Shore hardness of 95A, Overture TPU strikes the ideal balance between softness and resilience. Perfect for flexible applications, robotics, and fashion projects
- Excellent Layer Adhesion Setting the standard for impeccable layer adhesion and delivering impressive results. Overture TPU features optimal layer bonding and a flawlessly smooth finish
- Clog-Free & Bubble-Free Designed and manufactured with our patented clog-free formula to guarantee a smooth and seamless printing experience. All spools undergo thorough drying for 24 hours before packaging and are vacuum-sealed in resealable foil packaging. To maintain optimal performance, store TPU filament in sealed storage with desiccants (silica gel) or dry for >8 hours at 65 C
- Wide Compatibility and Color Selection Overture filaments seamlessly integrates with most consumer and industrial 3D printers. Explore your creative side with our extensive selection of vibrant colors, ensuring a spectrum of possibilities for your unique creations
- Risk-Free & Lifetime Guarantee Discover worry-free 3D printing with Overture filament backed by our lifetime satisfaction guarantee. No matter the challenges, we're here to support you for a seamless 3D printing experience. Trust Overture as your dependable supplier of 3D printing filaments and accessories
- See more on Amazon...
Brand: OVERTURE | Manufacturer: OVERTURE
Dimensions: 8.23 x 8.78 x 2.95 inches | Weight: 2.20 pounds
See On Amazon #3
Capricorn Bowden PTFE Tubing 1M XS Series 1.75MM Filament with 2X PC4-M6 & 2X PC4-M10 Pneumatic Fittings & Tube Cutter for Creality Ender 3 V2/ Ender 3/ Ender 3 Pro/Ender 5/ CR-10/10S 3D Printer
Asin: B086YPDHMF
Pc4-M6 Couplers: Thread M6/3Mm, Inner Diameter 4Mm, Fit For The Tube Whose Outer Diameter Is 4Mm, Made Of Premium Copper And Plastic, Sturdy And Durable. Pc4-M10 Couplers: Thread M10/6Mm, Inner Diameter 4Mm, Fit For The Tube Whose Outer Diameter Is 4Mm, Made Of High Qulity Stainless Steel And Plastic, High Hardness, Antioxidtion, Anti Corrosion. The Extruder Fittings Are Pc4-M6 And The Hotend Fittings Are Pc4-M10..
Any Questions Please Feel Free To Contact Us At Any Time. We Will Reply To You Within 24 Hours And Provide Technical Support For You..
One Ptfe Cutter With An Extra Sharp Razor Is Also Included To Ensure That The Ptfe Is Cut Flat On Both Sides To Prevent Any Malfunctions Or Heat Creep When Feeding And Retracting..
Capricorn Ptfe Is Well Regarded As The Highest Quality Ptfe Tubing In All Of 3D Printing. The Tight Tolerances Make Sure That The Filament Is Lead Directly To The Hotend With As Little Room For Error As Possible Between The Extruder And The Hotend. Capricorn Ptfe Xs Series Is Rated For Withstanding The Highest Temperatures In The Market Which Is Perfect For Printing Exotic Filaments Such As Abs, Nylon, And Polycarbonate..
Features
- 100% Original Capricorn XS Series tubing.
- Capricorn PTFE is well regarded as the highest quality PTFE tubing in all of 3D printing. The tight tolerances make sure that the filament is lead directly to the hotend with as little room for error as possible between the extruder and the hotend. Capricorn PTFE XS Series is rated for withstanding the highest temperatures in the market which is perfect for printing exotic filaments such as ABS, Nylon, and Polycarbonate.
- PC4-M6 Couplers: thread M6/3mm, inner diameter 4mm, fit for the tube whose outer diameter is 4mm, made of premium copper and plastic, sturdy and durable. PC4-M10 Couplers: thread M10/6mm, inner diameter 4mm, fit for the tube whose outer diameter is 4mm, made of high qulity stainless steel and plastic, high hardness, antioxidtion, anti corrosion. The extruder fittings are PC4-M6 and the hotend fittings are PC4-M10.
- One PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep when feeding and retracting.
- Any questions please feel free to contact us at any time. We will reply to you within 24 hours and provide technical support for you.
- See more on Amazon...
Brand: Sovol | Manufacturer: Sovol
See On Amazon #4
Comgrow 25PCS MK8 Ender 3 V2 Nozzles 0.4MM, 3D Printer Brass Hotend Nozzles with DIY Tools Storage Box for Creality Ender 3/Ender 3 Pro/Ender 3 Max/5 Pro/Ender 3 S1/Ender 3 Neo/CR 10 Series 3D Printer
Asin: B0B9LYZSKC
Strong Practicability - Storage Box For Easy Carrying And Storage Of Small Accessories.The Nozzle Cleaning Needle Is Made Of High-Quality Stainless Steel With Good Toughness And Is Not Easy To Break, And The Nozzle Can Be Cleaned From Multiple Angles.The Hexagon Wrench Makes The Adjustment Of The Nozzle Easier..
Wide Compatibility - Suitable For Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 Max/Ender 5 Pro/Ender 3 S1/Ender 3 S1 Pro/Ender 3 Neo And Cr 10 Series 3D Printers.Compatible With All 1.75Mm Pla Abs Filament 3D Printers..
High Precision - Input Diameter 1.75Mm, Smooth Inner Wall, Extruder Nozzle Diameter Error Less Than 0.02 Mm.Greatly Reduces The Risk Of Print Head Leaks And Avoids Nozzle Clogging..
Package List - The 3D Printer Extruder Nozzles Come With 0.4 Mm Brass Nozzles*25, Nozzle Cleaning Needles*10, Hexagon Wrench*1, Stainless Steel Tweezers*1, And A Storage Box..
Features
- Premium Quality - 25 PCs high-quality brass nozzles, good abrasion resistance, heat resistance, and corrosion resistance.It is convenient for you to replace them in time to achieve high-quality printing.
- Package List - The 3D printer extruder nozzles come with 0.4 mm brass nozzles*25, nozzle cleaning needles*10, hexagon wrench*1, stainless steel tweezers*1, and a storage box.
- Strong Practicability - Storage box for easy carrying and storage of small accessories.The nozzle cleaning needle is made of high-quality stainless steel with good toughness and is not easy to break, and the nozzle can be cleaned from multiple angles.The hexagon wrench makes the adjustment of the nozzle easier.
- High Precision - Input diameter 1.75mm, smooth inner wall, extruder nozzle diameter error less than 0.02 mm.Greatly reduces the risk of print head leaks and avoids nozzle clogging.
- Wide Compatibility - Suitable for Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 Max/Ender 5 Pro/Ender 3 S1/Ender 3 S1 Pro/Ender 3 Neo and CR 10 Series 3D printers.Compatible with all 1.75mm PLA ABS filament 3D printers.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
See On Amazon #5
OVV3D Tri-Colors PLA 3D Printer Filament 1.75mm, Coextrusion Rainbow Filament with Silk PLA Red-Yellow-Blue, 3D Printing Filament +/-0.02mm, 1kg/2.2lbs
Asin: B0B431Y8RJ | Model: B01RDYWBE | PartNumber: B01RDYWBE
【Easy To Print】The Diameter Tolerance Of This 1.75 Pla Filament Is +/- 0.02Mm. More Stable Diameter Tolerance Of 3D Printer Filament Would Give You Smoother 3D Printing. High Toughness Pla Filament 1.75Mm Cause You Have Room For 3D Printing Imagination..
【Eco Packaging】Instead Of Plastic Spools, We Use Paper Spool And Paper Box To Package Pla Filament. Protecting The Environment Is The Responsibility Of Each Of Us. The Pla Filament Is Vacuum Packed With High Quality Desiccant To Keep Dry..
【Upgrade Pla Raw Material】The Raw Material Comes From Europe, And It Has Been Developed And Modulated To Show A Charming Gloss On The Pla. No Jamming, No Bubble, No Tangle, And No Layer Line, Just Silk Color Changing Pla Filament..
【Silk Pla Filament】We Specialize In Silk Pla Filament So That The Surface Of This Tri-Color 3D Printing Filament Is Very Smooth And Shiny. What You 3D Printing Out Will Be As Glossy As In The Pictures, No Exaggeration..
Features
- Tri-Colors Coextruded Filament Different from normal color change rainbow PLA filament, every inch of this magic 3d filament is made of three colors-Red, Blue, and Yellow. Therefore, you will easily get all colors, even for very small prints. Different prints will present different effects. Enjoy your 3d printing creations.
- Silk PLA Filament We specialize in silk PLA filament so that the surface of this tri-color 3d printing filament is very smooth and shiny. What you 3d printing out will be as glossy as in the pictures, no exaggeration.
- Easy to Print The diameter tolerance of this 1.75 PLA filament is +/- 0.02mm. More stable diameter tolerance of 3D printer filament would give you smoother 3D printing. High toughness PLA filament 1.75mm cause you have room for 3D printing imagination.
- Upgrade PLA Raw Material The raw material comes from Europe, and it has been developed and modulated to show a charming gloss on the PLA. No jamming, no bubble, no tangle, and no layer line, just silk color changing PLA filament.
- ECO Packaging Instead of plastic spools, we use paper spool and paper box to package PLA filament. Protecting the environment is the responsibility of each of us. The PLA filament is vacuum packed with high quality desiccant to keep dry.
- See more on Amazon...
Brand: OVVNYXE | Manufacturer: OVV3D
Weight: 2.20 pounds
See On Amazon #6
Creality Upgrade Ender 3 Extruder, Ender 3 V2 Upgrades Metal Extruder Aluminum MK8 Bowden Extruder 40 Teeth Drive Gear for Ender 3 Pro/Ender 5 Pro/Ender 5 Plus/CR-10 Series 3D Printer
Asin: B07WHYBVJ5 | Ean: 6973298330811
Work Better. It Makes Loading The Filament Easier And Smoother, No Worries About Filament Scraping Or Breaking..
Easy To Install. This Extruder Diy Kit Comes With An Instruction Of How To Put It Together, Which Makes It More Easy To Install..
Fits 1.75Mm Filament. 40 Teeth Drive Gear Compatible With Pla/Abs/Wood/Tpu/Pteg. Please Note: Some Printer Models Like Ender 3 And Edner 3 Pro, Their Original Extrusion Gears Cannot Be Removed, So These Model Printers Do Not Have To Change The Extrusion Screw. Ender 3V2，Its Extrusion Gear Can Be Replaced..
Last Over Years. Made By High Quality Aluminum, Last Much Longer Your Stock Plastic Or 3D Printed Extruder Feeder Drive..
Features
- Compatibility: This Upgraded 3d printer accessories is an original upgraded replacement part for Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 Max, Ender 5, Ender 5 Plus, Ender 5 Pro, CR-10, CR-10 V2, CR-10 Max, CR-10 S4, CR 10, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus, CR-X, CR 20, CR 20 Pro. It is also compatible with other 3D printers except the printers using a direct drive setup. No need to change stepper motors or other mounting hardware.
- Last Over Years. Made by high quality aluminum, last much longer your stock plastic or 3D printed extruder feeder drive.
- Work Better. It makes loading the filament easier and smoother, no worries about filament scraping or breaking.
- Fits 1.75mm filament. 40 Teeth drive gear compatible with PLA/ABS/Wood/TPU/PTEG. Please Note: Some printer models like Ender 3 and Edner 3 Pro, their original extrusion gears cannot be removed, so these model printers do not have to change the extrusion screw. Ender 3V2 its extrusion gear can be replaced.
- Easy to Install. This extruder DIY kit comes with an instruction of how to put it together, which makes it more easy to install.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
See On Amazon #7
Creality Official Ender 3 Extruder Upgrade Metal MK8 Bowden 3D Printer Parts for Ender-3 V2/Ender-3 Pro/Ender-3 Max CR-10/10S Gray Aluminum 1.75mm Filament 3D Printer Extruder Drive Feeder
Asin: B09LQKN5WG | Model: / | PartNumber: /
🎈【Improved Performance】The Optimized Extruder With Metal Extrusion And Original Hotend Kit Pushes The Filament Into The Printer Nozzle, Greatly Making The Metal Extruder Retain Power In Filament Feed-In. And The Beveled Filament Intake Can Prevent Scraping The Filament As It Is Pulled Into The Feeder..
🎈【After Sales Support】More Than 20 Engineers Provide 24/7 Customer Service With 12-Months Limited And Lifetime Technical Assistance. Please Kindly Contact Us(Seller) Via “Ask A Question” Find Us Directly Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What Question..
🎈【Easy To Install】Diy Kit And You Need To Assemble By Yourself. The Full Necessary Screws & Parts Kit For The Extruder Is Included. Referring To Instructions Or Our 5Th Picture To Install, It Is Very Easy And Straightforward To Switch To This Upgraded Part On Your Machine..
🎈【Work Better】Our 3D Printer Extruder Kits Have An Adjustable Bolt So That You Can Adjust The Pressure Of The Extruder Gear As Needed. The Extruder Drive Has Better Stronger Pressure Pushing The Filament Into The Printer Nozzle And So Will Improve The Printer's Performance. 40 Teeth Drive Gear Feeds The 1.75Mm Filament, Compatible With Pla/Abs/Wood/Tpu/Pteg..
Features
- Quality Assurance 100% official all-metal 3D printer extruder. High quality aluminum alloy material and sandblast to surface oxidization, ensuring this gray extruder is last for long term use. Works better than original plastic stock extruder. Original Creality 3D printers accessories for Ender-3/Ender-3 Pro/Ender-3S/Ender-3 V2/Ender-3 Max/CR-10/CR-10S.
- Work Better Our 3d printer extruder kits have an adjustable bolt so that you can adjust the pressure of the extruder gear as needed. The extruder drive has better stronger pressure pushing the filament into the printer nozzle and so will improve the printer's performance. 40 Teeth drive gear feeds the 1.75mm filament, compatible with PLA/ABS/Wood/TPU/PTEG.
- Improved Performance The optimized extruder with metal extrusion and original hotend kit pushes the filament into the printer nozzle, greatly making the metal extruder retain power in filament feed-in. And the beveled filament intake can prevent scraping the filament as it is pulled into the feeder.
- Easy To Install DIY kit and you need to assemble by yourself. The full necessary screws & parts kit for the extruder is included. Referring to instructions or our 5th picture to install, it is very easy and straightforward to switch to this upgraded part on your machine.
- After Sales Support More than 20 engineers provide 24/7 customer service with 12-months limited and lifetime technical assistance. Please kindly contact us(seller) via ask a question find us directly cause our customer service will respond to you within 24 hours no matter what question.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
Dimensions: 2.56 x 4.33 x 3.15 inches
See On Amazon #8
Creality Ender 3 /Pro/V2 3D Printer Assembled Extruder MK8 HotEnd Kit 24V with 0.4mm Nozzle Upgrade with Low Friction Creality-Capricorn Tubing
Asin: B07WNQP916 | Model: ENO-Ender3-Hotend-Bluetube | PartNumber: ENO-Ender3-Hotend-Bluetube | Ean: 0705300791497, 0198549003108 | UPC: 705300791497, 198549003108
Hotend Replacement Parts Suitable For Ender 3, Ender-3X, Ender-3 Pro, Ender 3 V2 3D Printer..
Creality-Capricorn Tube Is Far Superior To The White Ptfe Tubing Supplied With Most 3D Printers. Its Much Smoother To Feed Filament Through. And When Printing It Reduces The Drag On The Extruder Giving A Much Smoother Travel And Print Quality..
High Lubricity Additives Make Our Xs Series Tubing The Lowest Friction Bowden Tubing On The Market. Less Friction Means More Responsiveness, Less Retraction, More Accurate Prints, Less Slippage, Wear, And Tear On The Extruder, And Less Clogging When Printing Chunky Filaments Such As Some Woodfills Or Ironfills. Lower Retraction Means Time Saved Every Time The Extruder Retracts. Over The Course Of A Print, A Few Milliseconds Here And A Few There Add Up To A Lot Of Time Saved..
Upgrade With Low Friction Creality-Capricorn Original Teflon Tube 40Cm..
Features
- It's 100% Creality Original and Creality-Capricorn PTFE Tubing.
- Upgrade with Low Friction Creality-Capricorn Original Teflon Tube 40CM.
- Hotend replacement parts suitable for ender 3, ender-3x, ender-3 pro, Ender 3 V2 3d printer.
- High Lubricity Additives make our XS Series tubing the lowest friction Bowden tubing on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills. Lower retraction means time saved every time the extruder retracts. Over the course of a print, a few milliseconds here and a few there add up to a lot of time saved.
- Creality-Capricorn tube is far superior to the white PTFE tubing supplied with most 3D printers. Its much smoother to feed filament through. And when printing it reduces the drag on the extruder giving a much smoother travel and print quality.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #9
Official Creality 3D Printer Ender 3 Upgraded Silent Board Motherboard V4.2.7 with TMC2225 Driver Marlin 2.0.1 for Ender 3/ Ender 3 V2/ Ender 3 Pro/Ender 3 Max/Ender 3 Neo/3 V2 Neo/3 Max Neo
Asin: B09NMJMPN1 | Model: Creality Ender 3 Mainboard | PartNumber: Creality Ender 3 Mainboard
【Driver】Tmc2225 Driver & V0.0.6 Firmware From Creality ( Based On Marlin 2.0.1) For V4.2.7 Board. The Bootloader Has Been Preinstalled..
【After Sale Service】Any Issues Or Questions About Our Product Please Feel Free To Contact Us At Any Time. We Have Professional Technical Team To Provide Technical Supports For You Within 24 Hours..
【Update Firmware Method】Please Copy The Correct Firmware File To A Formated Sd Card With No Other Files In It. Turn Off The Printer And Unplug The Power Cord. Insert The Sd Card & Power Cord, And Turn On The Printer. Wait 10S To Complete The Firmware Updating Process..
【Widely Application】Compatible With Creality Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 Max, Ender 3 Neo,Ender 3 V2 Neo/Ender 3 Max Neo 3D Printers. Please Notice: It Only Plug And Play For Ender-3. If You Want To Install It On Other Machine, Please Flash The Relative Machine V4.2.7 Firmware. You Can Download Firmware From Official Website..
Features
- Super Quiet The silent mainboard can reduce stepper motor noise. TMC ultra-quiet motor drive chip, ultra-quiet system design, so that the machine is always running at low decibels (<50dB).
- Widely Application Compatible with Creality Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 MAX, Ender 3 Neo,Ender 3 V2 Neo/Ender 3 Max Neo 3D printers. PLEASE NOTICE: It only plug and play for Ender-3. If you want to install it on other machine, please flash the relative machine V4.2.7 firmware. You can download firmware from official website.
- Driver TMC2225 driver & V0.0.6 firmware from Creality ( based on Marlin 2.0.1) for V4.2.7 board. The bootloader has been preinstalled.
- Update Firmware Method Please copy the correct firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord. Insert the SD card & power cord, and turn on the printer. Wait 10s to complete the firmware updating process.
- After Sale Service Any issues or questions about our product please feel free to contact us at any time. We have professional technical Team to provide technical supports for you within 24 hours.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
Weight: 0.26 pounds
See On Amazon #10
Creality 3D Official Printer Ender 3 Dual Z-axis Upgrade Kit with Lead Screw, Metal Power Supply Holder and Stepper Motor, 3D Printer Ugrades Kit for Ender 3, Ender 3 Pro, Ender 3 V2
Asin: B09N8QQDSP | Model: CREALITYENDER3DUALZ | PartNumber: CREALITYENDER3DUALZ
【Smooth Running】 Upgrade Single Z-Axis Structure To A Dual Z-Axis Structure, Will Make The Printer More Easy To Leveling, Both Ends Of The X Axis Are Raised And Lowered Synchronously, Which Reduces Difficulty And Frequency Of Bed Leveling Obviously..
【After Sales Service】Creality 3D Pay Great Attention To The Buyer’S User Experience. If You Have Unsolvable Problems During Installation And Use, Please Feel Free To Contact Us, Our After-Sales Technical Team Will Provide You With Detailed Solutions Within 24 Hours..
【High Comparable】The Dual Z Axis Upgrade Kit Is Compatible With Ender 3/ Ender 3 Pro/ Ender 3 V2/Ender 3 Neo/Ender 3 V2 Neo 3D Printer. Easily Improve 3D Printers With Low Cost Efficiency To Dual Z Axis Mode..
【Stable Performance】 Compared With Closed Timing Belt, This 3D Printer Parts Set Still Retains The Design Of Stepper Motor To Ensure Screw Rod Smooth Operation..
Features
- Increased Accuracy Compared with original structure, dual Z-axis kit reduces the layer ripple caused by Z-axis vibration, avoiding backlog of filament thoroughly, which improves stability of 3D printing and increases the printing performance of 3D printer.
- Stable Performance Compared with Closed Timing Belt, this 3D printer parts set still retains the design of stepper motor to ensure screw rod smooth operation.
- Smooth Running Upgrade Single Z-axis structure to a dual Z-axis structure, will make the printer more easy to Leveling, both ends of the X axis are raised and lowered synchronously, which reduces difficulty and frequency of bed leveling obviously.
- High Comparable The dual z axis upgrade kit is compatible with Ender 3/ Ender 3 Pro/ Ender 3 V2/Ender 3 Neo/Ender 3 V2 Neo 3D printer. Easily improve 3D printers with low cost efficiency to Dual Z axis mode.
- After Sales Service Creality 3D pay great attention to the buyer s user experience. If you have unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
Dimensions: 2.56 x 3.94 x 15.55 inches | Weight: 2.01 pounds
See On Amazon #11
0.4MM MK8 Ender 3 Nozzles 25 pcs 3D Printer Brass Nozzles Extruder for Makerbot Creality CR-10 with 5 Needles and Metal Storage Box (0.4mm)
Asin: B082PZG1RZ | Model: LM-G1RZ | PartNumber: LM-G1RZ | Ean: 0734830917633 | UPC: 734830917633
Precision Process: Made With Centering Cnc Precision Automatic Lathe And One-Time Forming Technology, Make Sure The Input And Output Holes Are Concentric And The Interior Of Nozzle Is Smooth Without Burrs. Due To All Of Above, Not Only Reduce The Resistance, Avoid Filament Getting Stuck On Nozzle, But Also Effectively Guarantee The Service Life Of The Nozzle, Make Out Of Filament More Smoother..
Each Of Our Kit Only Comes In A Single Size, So You Can Feel Free Mix And Match!.
Precise Design: Cutting With The Diamond Knife, Make The Contact Surface More Flat, So It Reduces The Risk Of Printhead Leakage Greatly And Avoid Nozzles Clogging..
Applicability And Compatibility: Our Nozzles Fit For 3D Printer Makerbot Creality Cr-10, Mk8 Makerbot Reprap Prusa I3, Compatible With All 1.75Mm Pla Abs 3D Printer. Fit Exactly Like The Original..
Features
- Parameter and Specifications: Input diameter 2.00mm, Output diameter 0.4 mm, out thread M6, Thread length 4mm; a set of 25pcs printer nozzles and 5 pcs stainless steel needles. And the outer surface is marked with a size, So you can easily identify the specifications of the nozzle.
- Applicability and Compatibility: Our nozzles fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer. Fit exactly like the original.
- Precision Process: Made with centering CNC precision automatic lathe and one-time forming technology, make sure the input and output holes are concentric and the interior of nozzle is smooth without burrs. Due to all of above, not only reduce the resistance, avoid filament getting stuck on nozzle, but also effectively guarantee the service life of the nozzle, make out of filament more smoother.
- Precise Design: Cutting with the diamond knife, make the contact surface more flat, so it reduces the risk of printhead leakage greatly and avoid nozzles clogging.
- Each of our kit only comes in a single size, so you can feel free mix and match!
- See more on Amazon...
Brand: Meafeng | Manufacturer: Meafeng
Dimensions: 3.94 x 3.94 x 3.94 inches
See On Amazon #12
Official Creality K1C Silicone Sock, 3PCS Ender 3 V3 Silicone Cover, Hotend Heat Insulation Case Cover Heating Block Cover for Creality Ender 3 V3/Ender 3 V3 Plus/Ender 3 V3 KE/K1C/K1/K1 Max/CR 10 SE
Asin: B0CSKHT7ZD
【Heat Insulation】Ender 3 V3 Plus Silicone Socks Can Accelerate The Heating Process, Avoid Heat Dissipation At The Heating End, Stabilize The Temperature At The Heating End, And Is Not Affected By Any Environment..
【After-Sales Support】We Are The Official Creality Store And Pay Great Attention To The Buyer’S User Experience. We Provide Professional After - Sale Support, More Than 20 Engineers Provide Customer Service 24 Hours / 7 Days, Please Contact Us Directly (Seller) Via "Ask A Question"..
【Package】3Pcs Creality Ender 3 V3 Ke Silicone Socks For Daily Replacement.Sock Blocker Is Flexible, Can Be Placed Close To The Home Heater Block, Solid And Not Easy To Fall Off, Easy To Install..
【Keep Clean】Not Only Can It Effectively Protect The Creality Hotend From Wear And Tear, But Also Keep It Clean And Prolong Its Service Life. Also Clean The Insulation Around The Nozzle To Prevent Burns..
Features
- Quality Assurance 100% original Creality heater block silicone sock for Creality K1C/Ender 3 V3/Ender 3 V3 Plus/Ender 3 V3 KE/K1 /K1 Max/CR-10 SE. Creality Ender 3 V3 silicone socks are made of heat-resistant, non-stick silicone material, much more durable.
- Keep Clean Not only can it effectively protect the Creality hotend from wear and tear, but also keep it clean and prolong its service life. Also clean the insulation around the nozzle to prevent burns.
- Heat Insulation Ender 3 V3 Plus silicone socks can accelerate the heating process, avoid heat dissipation at the heating end, stabilize the temperature at the heating end, and is not affected by any environment.
- Package 3PCS Creality Ender 3 V3 KE silicone socks for daily replacement.Sock blocker is flexible, can be placed close to the home heater block, solid and not easy to fall off, easy to install.
- After-Sales Support We are the Official Creality Store and pay great attention to the buyer s user experience. We provide professional after - sale support, more than 20 engineers provide customer service 24 hours / 7 days, please contact us directly (seller) via ask a question.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
Dimensions: 0.91 x 0.73 x 1.02 inches
See On Amazon #13
Official Creality 3D Printer Ender 3 0.4mm 5PCS Brass Hotend Nozzles for Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 Max/Ender 5 Series and CR 10 Series
Asin: B09W2J7P5X | Model: CR-NOZZLES-0.4MM | PartNumber: CR-NOZZLES-0.4MM
【Applicability And Compatibility】Mk8 Extruder Nozzles Fit For 3D Printers Like Creality Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 Max/Ender 5 Series/Cr 10 Series, Compatible With All 1.75Mm Pla Abs 3D Printers. Fit Exactly Like The Original..
【After Sales Service】We Pay Great Attention To The Buyer’S User Experience. If You Have Unsolvable Problems During Installation And Use, Please Feel Free To Contact Us, Our After-Sales Technical Team Will Provide You With Detailed Solutions Within 24 Hours..
【Package Include】Printer Nozzles Come With 5 Pieces Of Mk8 Nozzles In 0.4Mm.
【Precise Design】3D Printer Nozzles Can Prevent The Print Head Leakage Effectively And Produce Consistent Prints With Smooth And Glossy Polish. Reduce The Resistance From The Corners And Avoid Blocking The Filament With A Rounded Chamfer. Easy To Identify With Engraving The Size On Each Nozzle..
Features
- Quality Assurance MK8 nozzles are made of high-quality brass material. Heavy duty and provide a long service life. Easy to install and change.
- Precise Design 3d printer nozzles can prevent the print head leakage effectively and produce consistent prints with smooth and glossy polish. Reduce the resistance from the corners and avoid blocking the filament with a rounded chamfer. Easy to identify with engraving the size on each nozzle.
- Applicability and Compatibility MK8 extruder nozzles fit for 3D Printers like Creality Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 Max/Ender 5 Series/CR 10 Series, compatible with all 1.75mm PLA ABS 3D printers. Fit exactly like the original.
- Package Include Printer nozzles come with 5 pieces of MK8 nozzles in 0.4mm
- After Sales Service We pay great attention to the buyer s user experience. If you have unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.
- See more on Amazon...
Brand: Creality
See On Amazon #14
Ender 3 Hotend, Authentic Creality Assembled Hotend Kit 3D Printer Parts with 5X 0.4mm Nozzles for Ender 3 Ender 3 V2 and Ender 3 Pro
Asin: B082XXRT78 | Model: Sprinkler Kit -01 | PartNumber: Sprinkler Kit -01 | Ean: 8711459631234
Mk8 Extruder Hot End Kit, White Wire Was Temperature Thermistor, Braided Wire Was Heating Tube 24V 40W. Tip Of The Nozzle, Aluminum Heating Block, Throat Pipe (Built-In Teflon)..
Silicone Cover Is Provided To Help Keep Temperatures On The Hotend Much More Stable And This Will Result In Higher Print Quality And Consistency..
Five 0.4Mm Brass Nozzle Are Included In This Hotend Kit. This Kit Can Work With Different Sizes Of Mk8 Nozzle: 0.2Mm/0.3Mm/0.4Mm/0.5Mm /0.6Mm/0.8Mm/1.0Mm..
Pluggable: The Heating Tube And Temperature Thermistor That From Control Box, Connect Them With Terminal Housing And Pin. Then You Could Plug The Hotend Kit, Easier To Replace Hotend Kit..
Features
- Compatibility: 100% Creality Original. This assembled hotend kit from Creality is a plug and play replacement for Ender 3/ Ender 3 V2 /Ender 3 Pro/ Ender 3S.
- Pluggable: the heating tube and temperature thermistor that from control box, connect them with terminal housing and pin. Then you could plug the hotend kit, easier to replace hotend kit.
- MK8 extruder hot end kit, white wire was temperature thermistor, braided wire was heating tube 24V 40W. Tip of the nozzle, aluminum heating block, throat pipe (built-in teflon).
- Five 0.4mm brass nozzle are included in this hotend kit. This kit can work with different sizes of MK8 nozzle: 0.2mm/0.3mm/0.4mm/0.5mm /0.6mm/0.8mm/1.0mm.
- Silicone Cover is provided to help keep temperatures on the hotend much more stable and this will result in higher print quality and consistency.
- See more on Amazon...
Brand: ORTHLAND | Manufacturer: Orthland
See On Amazon #15
Official Creality Ender 3 Direct Drive Extruder Kit, Comes with 42-40 Stepper Motor Hotend Kit, Support Flexible TPU Filament, BL Touch, Compatible with Ender 3 Pro/Ender 3 V2
Asin: B08J7N2LNL | Model: US4-ENDER3JINDUANJICHU-FBA | PartNumber: US4-ENDER3JINDUANJICHU-FBA
Direct Extruding Smooth Feed-In - Lower Torque Requirements On The Stepper Motor, Reducing The Possibility Of The Nozzle Blockage When Retracting Filament And Malfunction When Loading New Filament. There Is More Even Feed-In With Direct Extruding Than Bowden Tube Extruding..
Printing At High - Temperature, Strong Compatibility: Compatible With More Types Of Filament Like Pla Filament, Petg Filament And Tpu Filemnt. When Printing Flexible Tpu Under High Temperature, It Can Optimize Tpu Printing Performance..
Integrated All Metal Hotend - It's Sturdy And Wear-Resistant With An All-Metal Shell And Surface Oxidation Treatment; An Integrated Structure Is Convenient For Wiring And Replacing..
Easy To Install And Use - Switch Bowden Extrusion To Direct Extruder At Any Time And Easy To Disassembly. It Doesn't Affect The Inherent Function Of The Printer Because It's A Complete Extrusion Kit. With Longer Extruder Motor Connecting Cable, Tools, Accessories, And Wiring Diagram Instruction For Installation, Easy To Assemble..
Features
- Compatibility with - Creality Ender 3/Ender 3 V2/Ender 3 Pro 3D Printer.
- Easy to Install and Use - Switch Bowden extrusion to direct extruder at any time and easy to disassembly. It doesn't affect the inherent function of the printer because it's a complete extrusion kit. With longer Extruder motor connecting cable, tools, accessories, and wiring diagram instruction for installation, easy to assemble.
- Direct Extruding Smooth Feed-in - Lower torque requirements on the stepper motor, reducing the possibility of the nozzle blockage when retracting filament and malfunction when loading new filament. there is more even feed-in with direct extruding than Bowden tube extruding.
- Integrated All Metal Hotend - It's sturdy and wear-resistant with an all-metal shell and surface oxidation treatment; an Integrated structure is convenient for wiring and replacing.
- Printing at High - Temperature, Strong Compatibility: Compatible with more types of filament like PLA filament, PETG filament and TPU filemnt. When printing flexible TPU under high temperature, it can optimize TPU printing performance.
- See more on Amazon...
Brand: Wolias | Manufacturer: Creality 3D
Weight: 0.80 Pounds
See On Amazon #16
Creality Upgrade Ender 3 Hotend, Assembled Extruder with Capricorn Bowden PTFE Tubing for Creality Ender 3 Pro/Ender 3 V2 with Silicone Cover 3, 0.4mm Ender 3 Nozzle 3 and 2 Pair Pneumatic Couplers
Asin: B082PGCF2B | Model: ENDER3-PT | PartNumber: ENDER3-PT
Pluggable: The Heating Tube And Temperature Thermistor That From Control Box, Connect Them With Terminal Housing And Pin. Then You Could Plug The Hotend Kit, Easier To Replace Hotend Kit..
Mk8 Extruder Hot End Kit, White Wire Was Temperature Thermistor, Braided Wire Was Heating Tube 24V40w..
With More Terminal Housing And Pins As Spare Parts, In Case Fail Installation And Waste..
Original Capricorn Xs Serious Bowden Ptfe Tubing With Lowest Friction On The Market. Less Friction Means More Responsiveness, Less Retraction, More Accurate Prints, Less Slippage, Wear, And Tear On The Extruder, And Less Clogging When Printing Chunky Filaments Such As Some Woodfills Or Ironfills..
Features
- It's 100% Creality Original Upgrade Assembled Extruder Hotend.
- Original Capricorn XS Serious Bowden PTFE tubing with lowest friction on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills.
- Pluggable: the heating tube and temperature thermistor that from control box, connect them with terminal housing and pin. Then you could plug the hotend kit, easier to replace hotend kit.
- With more terminal housing and pins as spare parts, in case fail installation and waste.
- MK8 Extruder Hot End kit, white wire was temperature thermistor, braided wire was heating tube 24V40W.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Weight: 0.30 Pounds
See On Amazon #17
XIFOWE MK8 Nozzles 24 pcs 3D Printer Extruders Brass Nozzles 0.2mm, 0.4mm,0.6mm, 0.8mm, 1.0mm CR-10 Nozzle with DIY Tools and Metal Storage Box for CR-8 / CR-10 / Ender 3 / Ender 3S / 5/6 and so on
Asin: B0969LK4ZT | Model: NZ-0 | PartNumber: NZ-0 | Ean: 0717288217753 | UPC: 717288217753
【Convenient】✔Easy To Install, Easy To Use, No Processing, High Precision, Low Cost Diy Engraving Machine, 3D Printer Preferred. Designed In Smooth Feeding Chamfer With A Perfect Round Aperture. It Significantly Reduces Frictional Resistance On The Feed And Makes The Feeding Process Smoother..
【Universal】✔Suitable For 3D Printer Mk8 A6 A8, Compatible With Cr-10, Cr-10Mini, Cr-6, Cr-10S, Mk8 I3, Ender 2, Ender 3, Ender 5 And Ender 6. Compatible With Most 1.75Mm 3D Printer..
【What You Receive】✔2Pcs (0.2Mm) Printer Nozzles, 16Pcs (0.4Mm) Printer Nozzles, 2Pcs (0.6Mm) Printer Nozzles, 2Pcs (0.8Mm) Printer Nozzles, 2Pcs (1.0Mm) Printer Nozzles. 10Pcs Stainless Steel Needles. A Ten-Grid Parts Box. A 6Mm Inner Hexagon Wrench..
【Dimension】✔Input Diameter: 2.00Mm; Output Diameter: Size; Out Thread: M6; Thread Length: 5Mm; The Outer Surface Is Marked With A Size, You Can Easily Identify The Specifications Of The Nozzle..
Features
- Material High quality brass. It has good thermal conductivity and high wear resistance, reducing oxidation reactions at high temperatures and achieving excellent printing results.
- Dimension Input diameter: 2.00mm; Output diameter: Size; Out thread: M6; Thread length: 5mm; The outer surface is marked with a size, You can easily identify the specifications of the nozzle.
- Convenient Easy to install, easy to use, no processing, high precision, low cost DIY engraving machine, 3D printer preferred. Designed in smooth feeding chamfer with a perfect round aperture. It significantly reduces frictional resistance on the feed and makes the feeding process smoother.
- What you receive 2pcs (0.2mm) Printer Nozzles, 16pcs (0.4mm) Printer Nozzles, 2pcs (0.6mm) Printer Nozzles, 2pcs (0.8mm) Printer Nozzles, 2pcs (1.0mm) Printer Nozzles. 10pcs stainless steel needles. A Ten-Grid Parts Box. A 6MM inner hexagon wrench.
- Universal Suitable for 3D Printer MK8 A6 A8, Compatible with CR-10, CR-10mini, CR-6, CR-10S, MK8 I3, Ender 2, Ender 3, Ender 5 and Ender 6. Compatible with most 1.75mm 3D printer.
- See more on Amazon...
Brand: XIFOWE | Manufacturer: XIFOWE
See On Amazon #18
Mudder Hardened Steel Nozzle 0.4 Mm/ 1.75 mm 3D Printer Mk8 Nozzles High Temperature Wear Resistant Compatible with Ender 3/ Ender3 Pro, Prusa I3, Makerbot Creality Cr-10 All Metal Hotend
Asin: B089ZY11DD
High Precision: The Inner Wall Of The Mk8 Nozzles Is Smooth And Has No Burrs, The Viscosity Coefficient Is Small, Extruder Nozzle Diameter Error Less Than 0.02 Mm, Provide You A Accurate And Smooth Extrusion.
What You Get: Package Comes With 5 Pieces Of Black Mk8 Nozzles, The Size Is 0.4 Mm, Sufficient Quantity To Facilitate Your Timely Replacement, Achieving Quality Printing.
Compatibility: These 3D Printer Nozzles Compatible With Mk8 Hotend For Creality 3D Printers, Such As Ender-2/ Ender-3/ Ender-3 Pro/ Ender-5, Also Compatible With Creality Cr-10 All-Metal Hotend, Prusa I3, Anet A8, Reprap, Etc..
Good Performance: This Hardened Tool Steel Nozzle Has Higher Toughness And Hardness, Not Only Suitable For Common 1.75 Mm 3D Printer Filaments, But Also Can Print Filaments Of Carbon Fiber, Fiberglass, Etc..
Features
- Durable material: MK8 extruder nozzles are made of hardened tool steel, good abrasion resistance, heat resistance and corrosion resistance, sturdy construction makes them durable to serve you for long time, suitable for 3D printing at high temperature
- Good performance: this hardened tool steel nozzle has higher toughness and hardness, not only suitable for common 1.75 mm 3D printer filaments, but also can print filaments of carbon fiber, fiberglass, etc.
- High precision: the inner wall of the MK8 nozzles is smooth and has no burrs, the viscosity coefficient is small, extruder nozzle diameter error less than 0.02 mm, provide you a accurate and smooth extrusion
- Compatibility: these 3D printer nozzles compatible with MK8 hotend for Creality 3D printers, such as Ender-2/ Ender-3/ Ender-3 pro/ Ender-5, also compatible with Creality CR-10 all-metal hotend, Prusa i3, Anet A8, Reprap, etc.
- What you get: package comes with 5 pieces of black MK8 nozzles, the size is 0.4 mm, sufficient quantity to facilitate your timely replacement, achieving quality printing
- See more on Amazon...
Brand: Mudder | Manufacturer: Mudder
See On Amazon #19
Redrex Dual Gear Ender 3 Extruder with Two Washers Metal Drive Feeder Upgrade Kit Compatible with Creality Ender 3 V2 Pro,Ender 3 Neo Series,CR10 3D Printer TPU Filament Supported(Motor Shaft>21.5mm)
Asin: B09H6T3NNT | Model: RDX3D032 | PartNumber: RDX3D032
【Spring Adjustable Extruder】The Extrusion Spring Tension Could Be Adjusted By Tighten The Screw,Which Greatly Improves The Printing Accuracy And Feeding Issue..
【Kindly Reminder】:Please Calibrate The E-Steps From 100 To 139; Please Lubricate The Gears Before First Use;For 3D Printers With Filament Detector,As The Height Of Our Dual Gear Extruder May Be Different From The Original One, Please Print The Model To Rise Up The Filament Detector To Make Them At The Same Height;For Vyper Users,Please Swap The Motor Wire Sequence To Make It Turn Forward Instead Of Reverse.
【Application】:This All Metal Dual Drive Extruder Is Compatible With Ender 3 V2,Ender 3 Pro,Ender 3,Ender 3 Neo,Ender 3 V2 Neo,Ender 3 Max Neo,Ender 5 Pro,Cr10 S Series 3D Printer.Only Suit For 3D Printers With Motor Shaft Over 20Mm,Please Measure The Shaft Length Before Placing The Order..
【Upgraded Idler Gear Design】This Idler Gear Is Upgraded With Two Washers On Both Sides, So The Sharp Gear Will Not Ride Against The Bottom Of The Arm Or Chew It Up..
Features
- Double Gear Extrusion Mechanism :The filament is gripped by the dual drive much more firmly with less deformation, so it doesn't jam as much in the tube, nozzle or hotend.
- Upgraded Idler Gear Design This idler gear is upgraded with two washers on both sides, so the sharp gear will NOT ride against the bottom of the arm or chew it up.
- Spring Adjustable Extruder The extrusion spring tension could be adjusted by tighten the screw,which greatly improves the printing accuracy and feeding issue.
- Application :This all metal dual drive extruder is compatible with Ender 3 V2,Ender 3 Pro,Ender 3,Ender 3 Neo,Ender 3 V2 Neo,Ender 3 Max Neo,Ender 5 Pro,CR10 S series 3D printer.ONLY suit for 3d printers with motor shaft over 20mm,please measure the shaft length before placing the order.
- Kindly Reminder :Please calibrate the E-steps from 100 to 139; Please lubricate the gears before first use;for 3d printers with filament detector,as the height of our dual gear extruder may be different from the original one, please print the model to rise up the filament detector to make them at the same height;for Vyper users,please swap the motor wire sequence to make it turn forward instead of reverse
- See more on Amazon...
Brand: REDREX | Manufacturer: Redrex
Dimensions: 1.96 x 0.98 x 2.20 inches | Weight: 0.13 Pounds
See On Amazon #20
Creality Official MK8 Ender 3 Nozzles 24 pcs 3D Printer Brass Nozzles Extruder for Ender 3 Series and Creality CR-10 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm Printer Nozzle Kit
Asin: B093SKXHL3 | Model: AMEU-LD-3D-AC-Nozzles | PartNumber: AMEU-LD-3D-AC-Nozzles | Ean: 0752004599003 | UPC: 752004599003
Applicability And Compatibility--Mk8 Extruder Nozzles Fit For 3D Printer Makerbot Creality Cr-10, Mk8 Makerbot Reprap Prusa I3, Compatible With All 1.75Mm Pla Abs 3D Printer. Fit Exactly Like The Original..
After-Sale Service--There Are More Than 20 Engineers For After-Sales Service And Provide 24/7 Customer Service With 1-Year Limited And Lifetime Technical Assistance. Please Contact Us Via “Ask A Question”Directly To Get The Professional Assistance..
Package Include--Printer Nozzles Come With 24 Pieces Mk8 Nozzles In 7 Sizes, Input Diameter 1.75Mm (Quantity X Output Diameter): 2 X 0.2Mm, 2 X 0.3Mm, 12 X 0.4Mm, 2 X 0.5Mm, 2 X 0.6Mm, 2 X 0.8Mm, 2 X 1.0Mm, Screw Thread: M6, Hexagon Diameter: 6 Mm..
Precise Design--3D Printer Nozzles Can Prevent Print Head From Leakage Effectively And Produce Consistent Prints With Smooth And Glossy Polish.Reduce The Resistance From The Corners And Avoid Blocking Of The Filament With Rounded Chamfer.Easy To Identify With Engraving The Size On Each Nozzle..
Features
- 100% Creality Original--MK8 nozzles are made of high quality brass material.Heavy duty and provide a long service life.Easy to install and change.
- Precise Design--3d printer nozzles can prevent print head from leakage effectively and produce consistent prints with smooth and glossy polish.Reduce the resistance from the corners and avoid blocking of the filament with rounded chamfer.Easy to identify with engraving the size on each nozzle.
- Applicability and Compatibility--MK8 extruder nozzles fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer. Fit exactly like the original.
- Package Include--Printer nozzles come with 24 pieces MK8 nozzles in 7 sizes, Input diameter 1.75mm (quantity x output diameter): 2 x 0.2mm, 2 x 0.3mm, 12 x 0.4mm, 2 x 0.5mm, 2 x 0.6mm, 2 x 0.8mm, 2 x 1.0mm, Screw thread: M6, Hexagon diameter: 6 mm.
- After-sale Service--There are more than 20 engineers for after-sales service and provide 24/7 customer service with 1-year limited and lifetime technical assistance. Please contact us via ask a question directly to get the professional assistance.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
Weight: 0.13 pounds
See On Amazon
Looking For Something Else?
Search