Smatree Portable Charging Case Compatible for Apple Watch Series 8/7/6, Apple Series 8 Watch 45mm Hard Protective Travel Case, Original Magnetic Charging Cable NOT Included
Asin: B0811CZ36L | Model: A100 | PartNumber: A100
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Perfect Protection】:The Shell Is Made Of Premium Pu+ Abs And Pc Material, Protect Your Apple Watch Series 8 From Shocking And Scratching, Provides Excellent Protection From Dirt, Shocks And Other Daily Damages..
【Small And Portable】It Is Convenient To Place In Your Bag And Carry It Wherever You Go. Easy To Carry On Trips Or To Use In Home Or Office..
【Rapid Charging & Large Capacity】: 3000 Mah Battery Inside, Fully Charged About 3 Hours, It Can Charge 4-6 Times For Apple Watch Series 8..
【Adapter For Watch Series 8】Comes With Three Different Adapters So You Can Match Different Models Of Apple Watches.Type C-Connector Fit With Watch Series 7,Small Usb Connector Compatible For Watch Series Se/6/5 And Big Usb Compatible For Watch Series 4/3/2/1..
Features
- Broad Compatibility Fit for Apple Watch Series 8, Series 7, Series 5-1, 44mm, 42mm, 40mm, 38mm. Notice:When charging the charging box, you can only use the charging cable that comes with the charging box, other charging cables are not suitable for charging.And not fit with Apple Power Adapter.If you encounter any problems while charging, please feel free to contact us and we will do our best to help you.
- Adapter for watch series 8 Comes with three different adapters so you can match different models of Apple Watches.Type c-connector fit with Watch Series 7,Small USB connector compatible for Watch Series SE/6/5 and Big USB compatible for Watch Series 4/3/2/1.
- Perfect Protection :The shell is made of premium PU+ ABS and pc material, protect your Apple Watch Series 8 from shocking and scratching, provides excellent protection from dirt, shocks and other daily damages.
- Rapid Charging & Large Capacity : 3000 mAh Battery inside, fully charged about 3 hours, it can charge 4-6 times for Apple Watch Series 8.
- Small and Portable It is convenient to place in your bag and carry it wherever you go. Easy to carry on trips or to use in home or office.
- See more on Amazon...
Brand: Smatree | Manufacturer: Smatree
Dimensions: 4.20 x 4.20 x 2.40 Inches | Weight: 0.53 pounds
See On Amazon Similar To Smatree Portable Charging Case Compatible
#1
Smatree Carrying Case for New Nintendo 3DS XL/New 2DS XL, Hard Protective Shell Travel Case for Nintendo New 3DS/Nintendo New 3DS XL-Super NES Edition- Black/Red
Asin: B00Y824ZZ2 | Model: Smatree-SC022 | PartNumber: Smatree-SC022 | Ean: 0712322148437 | UPC: 712322148437
『Unique Interior Pouch Design』: The Removable Console Pouch Makes It Easier For You To Take Out Your Console From The Case Or Put It In The Case And Avoid Unnecessary Damage. Carabiner Loop For Conveniently Carrying..
『Risk-Free Purchase』: Totally Tailored For Your Nintendo New 2Ds Xl And 3Ds Console..
『Large Capacity』: 8 Slots Store Up To 8 Ds/3Ds Game Cartridges.Mesh Pocket With A Zipper Enlarges The Storage Space For The Standard Ds Wall Charger Or Other Accessories And Keep Them In Good Condition.Size: (7.7 X 4.8 X 3.1 Inches). Carabiner Loop For Conveniently Carrying..
『Multiple Compatibility』: This Case Well Fits For Nintendo New 3Ds Xl - Super Nes Edition, Nintendo New 2Ds Xl, Nintendo New 3Ds Xl, New 3Ds Ll, 3Ds Xl, 3Ds Ll, New 3Ds Or 3Ds ,Gpd Win 5.5 Inch Gamepad Tablet. It Will Not Worry You Anymore That The Ds Wall Charger Has No Place To Put When You Get The Smacase.(Not Compatible With Nintendo 2Ds).
Features
- Excellent protection& water resistant : Most cases of the same type use an inferior nylon shell, which doesn't protect your equipment very well.The appearance of this case is in High-quality PU material which looks more smooth and High-grade. The soft micro fiber interior will keep your console away from scratching.(More durable and water resistant than nylon cases)
- Multiple compatibility : This case well fits for Nintendo New 3DS XL - Super NES Edition, Nintendo New 2DS XL, Nintendo NEW 3DS XL, NEW 3DS LL, 3DS XL, 3DS LL, NEW 3DS or 3DS ,GPD WIN 5.5 Inch Gamepad Tablet. It will NOT worry you anymore that the DS wall charger has no place to put when you get the Smacase.(Not compatible with Nintendo 2DS)
- Unique interior pouch design : The Removable Console Pouch makes it easier for you to take out your Console from the case or put it in the case and avoid unnecessary damage. Carabiner loop for conveniently carrying.
- Large capacity : 8 slots store up to 8 DS/3DS game cartridges.Mesh pocket with a zipper enlarges the storage space for the standard DS wall charger or other accessories and keep them in good condition.Size: (7.7 x 4.8 x 3.1 inches). Carabiner loop for conveniently carrying.
- Risk-free purchase : Totally tailored for your Nintendo New 2DS XL and 3DS Console.
- See more on Amazon...
Brand: Smatree | Manufacturer: Smatree
Dimensions: 2.80 x 8.40 x 5.30 inches
See On Amazon #2
Smatree P100L Carrying Case Compatible for PS Vita 1000, PSV 2000, PS Vita PCH-2000,PSP 3000 with Cover (Console,Accessories and Cover NOT Included)
Asin: B01JUEWS4W | Model: P100L | PartNumber: P100L | Ean: 0611559196108 | UPC: 611559196108
『Unique Zippered Design』: Mesh Pocket With A Zipper For Charger Or Other Small Accessories And Keep Them In Good Condition.
『Easy-Carry』: Demention:8X 4.7X 2.7 Inches.With A Wrist Strap For Easy Carrying..
『Enough Slots』: 12 Slots For Game Cartridges Or Memory Card..
『Safe And Beautiful Materiall』: Waterproof Hard Shell Provides Perfect Protection.The Soft Micro Fiber Interior Will Keep Your Device Away From Scratching.Black And Red Combination Makes The Case Look More High-Grade. The Belt Within The Bottom Of Case Helps You To Take Out Your Console Easier..
Features
- LARGER SPACE : NOTE: If your console is equippd with a crystal protective shell, please choose P100L case. If you use bare console, you can choose Smatree P100 case, which is more compact. P100L case is larger than P100, there is more space for your crystal protective shell.
- SAFE AND BEAUTIFUL MATERIALl : Waterproof hard shell provides perfect protection.The soft micro fiber interior will keep your device away from scratching.Black and Red combination makes the case look more High-grade. The belt within the bottom of case helps you to take out your console easier.
- Unique Zippered Design : Mesh pocket with a zipper for charger or other small accessories and keep them in good condition
- Enough Slots : 12 slots for game cartridges or memory card.
- EASY-CARRY : Demention:8x 4.7x 2.7 inches.With a wrist strap for easy carrying.
- See more on Amazon...
Brand: Smatree | Manufacturer: Smatree
Weight: 0.00 pounds
See On Amazon #3
Smatree P100 Carrying Case Compatible for PS Vita, PS Vita Slim,PSP 3000(Without Cover) (Not Fit with PS Vita PCH 2000!)(Console and Accessories NOT Included)
Asin: B01B2FAWG8 | Model: Smatree-SC033 | PartNumber: Smatree-SC033
『Unique Zippered Design』: Mesh Pocket With A Zipper For Charger Or Other Small Accessories And Keep Them In Good Condition.(Console And Accessories Are Not Included).
『Easy-Carry』: Demention:7.8X 4.4X 2.4 Inches.With A Wrist Strap For Easy Carrying..
『Enough Slots』: 10 Slots For Game Cartridges Or Memory Card..
『Safe And Beautiful Material』: Waterproof Hard Shell Provides Perfect Protection.The Soft Micro Fiber Interior Will Keep Your Device Away From Scratching.Black And Red Combination Makes The Case Look More High-Grade..
Features
- PERFECT SHAPE : The Smatree P100 well fits for PS Vita , PS Vita Slim , PSP3000(Only for console WITHOUT soft cover).The belt within the bottom of case helps you to take out your console easier.
- SAFE AND BEAUTIFUL MATERIAL : Waterproof hard shell provides perfect protection.The soft micro fiber interior will keep your device away from scratching.Black and Red combination makes the case look more High-grade.
- Unique Zippered Design : Mesh pocket with a zipper for charger or other small accessories and keep them in good condition.(Console and accessories are not included)
- Enough Slots : 10 slots for game cartridges or memory card.
- EASY-CARRY : Demention:7.8x 4.4x 2.4 inches.With a wrist strap for easy carrying.
- See more on Amazon...
Brand: Smatree | Manufacturer: Smatree
Dimensions: 2.40 x 7.80 x 4.40 inches
See On Amazon #4
Smatree Hard Carrying Case Compatible with DJI Osmo Pocket 2/DJI Osmo Pocket (XS)
Asin: B07MYW76HL | Model: D60 | PartNumber: D60
With Comfortable Hand Strap For Easy Carrying. The Hand Strap Can Be Easily Attached To A Belt Or Large Bag..
We Offer 100% Money Back Or Replacement Guarantee If There Is Any Quality Problem..
Mesh Pocket With A Zipper Enlarges The Storage Space For Cables Or Small Other Accessories And Keep Them In Good Condition..
Nice Shaped Compartments Fit For Osmo Pocket, It Can Holds 1 X Osmo Pocket,4 X Neutral Density Filters,2 X Sd Cards,2 X Smartphone Adapter(Refer To Pictures)..
Features
- Size: Small, Dimensions: 7.6" x3.5" x2.8" compact and easy to store in backpacks or carry-on luggage; recommend for traveling and home storage.
- Nice shaped compartments fit for osmo pocket, it can holds 1 x osmo pocket,4 x Neutral density filters,2 x SD Cards,2 x Smartphone Adapter(Refer to pictures).
- With comfortable hand strap for easy carrying. The hand strap can be easily attached to a belt or large bag.
- Mesh pocket with a zipper enlarges the storage space for cables or small other accessories and keep them in good condition.
- We offer 100% money back or replacement guarantee if there is any quality problem.
- See more on Amazon...
Brand: Smatree | Manufacturer: Smatree
Dimensions: 0.59 x 7.48 x 3.15 inches
See On Amazon #5
Smatree Portable Osmo Pocket 2 PowerStick(Power Bank) Compatible for DJI Osmo Pocket 2 / DJI Osmo Pocket 1, Handheld Smartphone Holder Mount Bracket for Osmo Pocket Camera
Asin: B07QX492BL | Model: DP20 DH5 | PartNumber: DP20 DH5
High-Speed Charging : 5V/2A Type-C Output Port For Osmo Pocket Or Smartphone .Fully Charging The Osmo Pocket Need About 90 Mins ,Shorter Than Original Charging Case .Fully Charges Itself About 4 Hours (Not Use The Osmo Pocket )..
Note:1.The Knob Is Connected To The Smatree Charging Stick And Cannot Be Reomved. Besides, There Is No Need To Remove The Knob, For You Can Tighten Or Loosen The Holder For Osmo Pocket & Phone/ Charing Base To The Left/Right. 2.If You Want To Change The Charging Base To The Phone/Osmo Pocket Holder, All You Need To Do Is To Loosen The Charging Base By Turning The Knob(Instead Of Taking It Off) To The Right, And Then Insert The Holder And Tighten It To The Left..
Durable Material: 180Mm Soft Silicone Rubber Hand Grip With 1/4 Standard Screw Port At The Bottom Allows Universal Tripod To Be Attached. The Powerstick Built-In Safety System Fully Protects The Charger From Short Circuit, Over-Current ,Low- Voltage And Overheat.（Non-Stretchable）.
Large Capacity:Built-In Rechargeable 5000Mah Battery Supply, It Can Charge About 2 Times For Dji Osmo Pocket. Efficiently Extend Your Shooting Time.（Please Fully Insert The Pocket / Pocket 2 Into The Charger Base When Charging.）.
Features
- There are two combinations: Combination 1 - PowerStick + Convertible charging base for pocket 1/2; Combination 2 - PowerStick + Convertible knob + OSMO Pocket phone holder set for pocket 1/2 and phone.
- Large Capacity:Built-in rechargeable 5000mAh battery supply, It can charge about 2 times for DJI OSMO Pocket. efficiently extend your shooting time. Please fully insert the Pocket / Pocket 2 into the charger base when charging.
- High-Speed Charging : 5V/2A Type-C output port for OSMO Pocket or Smartphone .Fully charging the OSMO Pocket need about 90 mins ,Shorter than original charging case .Fully charges itself about 4 hours (not use the OSMO Pocket ).
- Durable Material: 180mm Soft Silicone rubber hand grip with 1/4 Standard Screw port at the bottom allows universal tripod to be attached. The PowerStick built-in safety system fully protects the charger from short circuit, over-current ,Low- voltage and overheat. Non-stretchable
- NOTE:1.The knob is connected to the smatree charging stick and cannot be reomved. Besides, there is no need to remove the knob, for you can tighten or loosen the holder for osmo pocket & phone/ charing base to the left/right. 2.If you want to change the charging base to the phone/osmo pocket holder, all you need to do is to loosen the charging base by turning the knob(instead of taking it off) to the right, and then insert the holder and tighten it to the left.
- See more on Amazon...
Brand: Smatree | Manufacturer: Smatree
Weight: 0.84 pounds
See On Amazon #6
Smatree Charging Case Compatible for Beats Solo2/ Solo3/ Studio3 Headphone(Headphone is NOT Included)
Asin: B01FVZ68YA | Model: S200 | PartNumber: S200
Mesh Pockets: Elastic Mesh Pocket For Storing Cables Or Other Small Accessories And Keep Them In Good Condition.
Long Warranty And Patent Design: We Provide 1 Year Warranty And This Item Is In Patent Design.
Easy Carry And Noble Look: Convenient Carabiner Loop For Easy Carrying. The Loop Can Be Easily Attached To A Belt Or Large Bag; High-Graded Pu Leather With Unique Oval Shape Make It Looks More Noble And Attracting.
Large Capacity: The Power Bank's Capacity Is 2000 Mah. You Can Charge Your Wireless Headphone 6-8 Times Which Depends On Your Headphone Types . It Greatly Saves Your Time And Provide More Convenience No Matter At Home Or Traveling.
Features
- Built-in Power bank: A power case (8.77 inch * 6.7 inch * 2.95 inch) with built-in power bank (Headphone is NOT included) enables you to carry /storage and charge your wireless headphones at the same time
- Large Capacity: The power bank's capacity is 2000 mAH. You can charge your wireless headphone 6-8 times which depends on your headphone types . It greatly saves your time and provide more convenience no matter at home or traveling
- Mesh Pockets: Elastic mesh pocket for storing cables or other small accessories and keep them in good condition
- Easy Carry and Noble Look: Convenient carabiner loop for easy carrying. The loop can be easily attached to a belt or large bag; High-graded PU leather with unique oval shape make it looks more noble and attracting
- Long Warranty and Patent Design: We provide 1 year warranty and this item is in patent design
- See more on Amazon...
Brand: Smatree | Manufacturer: Smatree
Dimensions: 2.95 x 8.77 x 6.70 Inches | Weight: 0.66 pounds
See On Amazon #7
Smatree Headphone Hard Case Compatible with BeatsX, Beats Flex, Powerbeats2, Powerbeats3 Earphones, Bluetooth Sports Headphones,Portable Carrying Case Storage Bag for Earphone, Earbud(Black)
Asin: B074DW6NJ7 | Model: 4330151277 | PartNumber: 4330151277
Mesh Pocket Enlarges The Storage Space For Cables Or Other Small Accessories And Keep Them In Good Condition..
Risk-Free Purchase:We Offer 100% Money Back Or Replacement Guarantee If There Is Any Problem..
A Multifunctional And Portable Small Case,Not Only For Earphones,But Also Storage Bags For Earbud,Charger,Phone Cable,Key,Change,Coin,Mp3,Usb Flash Drive And So On.
Come With A Carabiner To Attach With Belt Or Large Bag For Easy Carrying On The Go..
Features
- This hard case provides complete protection for your phone charger and earphones, recommended for travelling and home storage.
- Come with a carabiner to attach with belt or large bag for easy carrying on the go.
- Mesh pocket enlarges the storage space for cables or other small accessories and keep them in good condition.
- A multifunctional and portable small case,not only for earphones,but also storage bags for earbud,charger,phone cable,key,change,coin,MP3,USB flash drive and so on
- RISK-FREE PURCHASE:We offer 100% Money back or Replacement Guarantee If there is any problem.
- See more on Amazon...
Brand: Smatree | Manufacturer: Ｓｍａｔｒｅｅ
Dimensions: 1.60 x 5.30 x 3.50 inches | Weight: 0.15 Pounds
See On Amazon #8
Smatree 3.6L Hard Carrying Case Compatible with DJI Osmo Pocket 2/Osmo Pocket - Fit for Osmo Pocket Charging Case
Asin: B07NWH6JSL | Model: Smatree-SA506 | PartNumber: Smatree-SA506
【Portable】-Ideal For Travel Or Home Storage, Built In Carry Handle And Carabiner.It Is Very Convenient To Carry Outside.This Travel Storage Bag Loop Keeps Your Osmo Pocket 2/Pocket And Accessories Secure..
【Quality Assurance】-Exterior Dimensions:25*18*8Cm/9.8*7*3.1Inch.We Offer 100% Money Back Or Replacement Guarantee If There Are Any Quality Problem..
【Large Capacity】-Mesh Pocket With A Zipper Enlarges The Storage Space For Cables Or Small Other Accessories And Keep Them In Good Condition..
【Upgrade Protection】-Compared With Similar Carrying Cases, This Case Uses A More Robust Shell Material. Thicker Shell With Stronger Protection More Durable.Made Of High-Density Material For More Durable,Which Is Waterproof And Anti-Scratch.Perfectly Protect Your Osmo Pocket Safety..
Features
- Compatible -Specially desiged for DJI Osmo Pocket 2/Pocket and it can holds 1 x Osmo Pocket 2/Pocket ,1 x Osmo Pocket Charging Case,1 x Wireless Module,1 x Controller Wheel,1 x Accessory Mount,1 x Audio Adapter,2 x Smartphone Adapter,2 x SD Cards,4 x Neutral Density Filters and more others acccessories.
- Upgrade protection -Compared with similar Carrying cases, this case uses a more robust shell material. Thicker shell with stronger protection more durable.Made of High-density Material for More Durable,which is waterproof and Anti-scratch.Perfectly protect your osmo pocket safety.
- Portable -Ideal for travel or home storage, built in carry handle and carabiner.It is very convenient to carry outside.This Travel Storage Bag loop keeps your osmo pocket 2/pocket and accessories secure.
- Large capacity -Mesh pocket with a zipper enlarges the storage space for cables or small other accessories and keep them in good condition.
- Quality Assurance -Exterior Dimensions:25*18*8cm/9.8*7*3.1inch.We offer 100% money back or replacement guarantee if there are any quality problem.
- See more on Amazon...
Brand: Smatree
Weight: 1.04 Pounds
See On Amazon #9
Smatree Portable Osmo Pocket 2 PowerStick(PowerBank) Compatible for DJI Osmo Pocket 2/ Pocket 1, Handheld Smartphone Holder Mount Pocket Bracket Set with Tripod for Osmo Pocket
Asin: B07QV5KK6R | Model: DP20 DH7 | PartNumber: DP20 DH7
High-Speed Charging : 5V/2A Type-C Output Port For Osmo Pocket Or Smartphone .Fully Charging The Osmo Pocket Need About 90 Mins ,Shorter Than Original Charging Case .Fully Charges Itself About 4 Hours..
Note:1.The Knob Is Connected To The Smatree Charging Stick And Cannot Be Reomved. Besides, There Is No Need To Remove The Knob, For You Can Tighten Or Loosen The Holder For Osmo Pocket & Phone/ Charing Base To The Left/Right. 2.If You Want To Change The Charging Base To The Phone/Osmo Pocket Holder, All You Need To Do Is To Loosen The Charging Base By Turning The Knob(Instead Of Taking It Off) To The Right, And Then Insert The Holder And Tighten It To The Left..
Unique Design : Tripod Part Made Of Aluminum Alloy,You Could Choose Any Angle Or Situation For Footage And Video Vlog. The Powerstick Built-In Safety System Fully Protects The Charger From Short Circuit, Over-Current ,Low- Voltage And Overheat ..
Large Capacity :Extension Rod Charging Stick Built-In Rechargeable 5000Mah Battery Supply, It Can Charge About 2 Times For Dji Osmo Pocket 2. Efficiently Extend Your Shooting Time.（Please Fully Insert The Pocket / Pocket 2 Into The Charger Base When Charging.）.
Features
- There are two combinations: Combination 1 - PowerStick + Convertible charging base for pocket 1/2; Combination 2 - PowerStick + Convertible knob + OSMO Pocket phone holder set for pocket 1/2 and phone.
- Large Capacity :Extension Rod Charging Stick Built-in rechargeable 5000mAh battery supply, It can charge about 2 times for DJI OSMO Pocket 2. efficiently extend your shooting time. Please fully insert the Pocket / Pocket 2 into the charger base when charging.
- High-Speed Charging : 5V/2A Type-C output port for OSMO Pocket or Smartphone .Fully charging the OSMO Pocket need about 90 mins ,Shorter than original charging case .Fully charges itself about 4 hours.
- Unique Design : Tripod part made of Aluminum alloy,you could choose any angle or situation for footage and video vlog. The PowerStick built-in safety system fully protects the charger from short circuit, over-current ,Low- voltage and overheat .
- NOTE:1.The knob is connected to the smatree charging stick and cannot be reomved. Besides, there is no need to remove the knob, for you can tighten or loosen the holder for osmo pocket & phone/ charing base to the left/right. 2.If you want to change the charging base to the phone/osmo pocket holder, all you need to do is to loosen the charging base by turning the knob(instead of taking it off) to the right, and then insert the holder and tighten it to the left.
- See more on Amazon...
Brand: Smatree | Manufacturer: Smatree
Weight: 1.27 Pounds
See On Amazon #10
Smatree 10.2L Waterproof Carrying Case Compatible for DJI Spark, Portable Hard Case for DJI Spark Fly More Combo
Asin: B076SRPJPF | Model: N180-16 | PartNumber: N180-16 | Ean: 0714485871146 | UPC: 714485871146
Tough Exterior Provide Maximum Protection For Your Spark And Accessories, Keep Them Well Organized While Traveling Or Transporting.
Exterior Dimensions:35.5X 27.2X 10.6Cm(13.9X10.7X 4.2Inch).
Ideal For Traveling With Rugged Exterior,Waterproof, Compact,Built In Carry Handle To Portable Secure Use.
Made Of High-Density Abs Material,Ideal Waterproof Case, Support Anti-Crash And Anti-Scratch When In Emergency, Give Your A Happy And Comfortable Trip.
Features
- With customized-cut form for 1x DJI Spark, 4x intelligent flight batteries,1x remote controller, 1x ac adapter charger,1x charging hub, 1x propeller guard bumper, keep it protected appropriately on vacation or outdoor activities
- Made of high-density ABS material,ideal waterproof case, support anti-crash and anti-scratch when in emergency, give your a happy and comfortable trip
- Tough exterior provide maximum protection for your Spark and accessories, keep them well organized while traveling or transporting
- Ideal for traveling with rugged exterior,waterproof, compact,built in carry handle to portable secure use
- Exterior Dimensions:35.5x 27.2x 10.6cm(13.9x10.7x 4.2inch)
- See more on Amazon...
Brand: Smatree | Manufacturer: Smatree
Dimensions: 4.20 x 13.90 x 10.70 Inches
See On Amazon
Looking For Something Else?
Search