LEER ROLLITUP | Fits 2014-2018 Chevy Silverado/GMC Sierra with 5.8' Bed | Soft Roll Up Truck Bed Tonneau Cover | 4R120 | Low-Profile, Sturdy, Easy 15-Minute Install (Black)
Asin: B08156HPJ4 | Model: Parent | PartNumber: Parent | Ean: 0812227028954 | UPC: 812227028954
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.100 Percent Bed Access – When You’Re Ready To Access Your Bed, The Rollitup Allows You The Ability To Have Full Access To Your Bed, Without The Removal Of Your Tonneau. Each Rollitup Cover Uses A Velcro Brand Hook & Loop Strip On The Sides And A One-Step Cable Release To Unlock The Cover..
Fitment – Please Double Check That Your Truck’S Year, Make, Model, And Bed Length Fit This Application Before Purchasing..
No-Drill Installation – With An Easy And Fast Installation Process, Our Rollitup Comes With The Tools And Instructions To Install Your Tonneau In Minutes..
Built To Last – Our Cover Is Made Out Of Heavy-Duty 24-Ounce Tear-Resistant, Marine-Grade Vinyl, With 3 Built-In Crossbars That Offer Support When The Cover Is Lying Flat. Our Side Rails And Clamps Are Made Of 6063 Aluminum, Which Is Corrosion-Resistant..
Features
- FITS PERFECT/EASY TO LATCH ROLLITUP tonneau covers fit perfectly on your bed rails and each part number is specifically designed for your model truck! Our ROLLITUP has an easy to latch mechanism that closes and locks at the end of the tailgate. Each cover has an adjustable tension system, keeping your ROLLITUP tight and wrinkle-free in any weather condition.
- BUILT TO LAST Our cover is made out of heavy-duty 24-ounce tear-resistant, marine-grade vinyl, with 3 built-in crossbars that offer support when the cover is lying flat. Our side rails and clamps are made of 6063 aluminum, which is corrosion-resistant.
- 100 PERCENT BED ACCESS When you re ready to access your bed, the ROLLITUP allows you the ability to have full access to your bed, without the removal of your tonneau. Each ROLLITUP cover uses a Velcro Brand hook & loop strip on the sides and a one-step cable release to unlock the cover.
- NO-DRILL INSTALLATION With an easy and fast installation process, our ROLLITUP comes with the tools and instructions to install your tonneau in minutes.
- FITMENT Please double check that your truck s year, make, model, and bed length fit this application before purchasing.
- See more on Amazon...
Brand: LEER | Manufacturer: LEER
Warranty: Parent
See On Amazon Similar To LEER ROLLITUP Fits 20142018 Chevy
#1
LEER Twist Handle Kit 113436-100XQ, 700, 100XL & Latches 83514/83515
Asin: B0871VMGN5 | Ean: 0643934301609 | UPC: 643934301609
Genuine Leer Twist Lock.
Drivers Side & Passenger Side Striker Latches (83514 / 83515).
Features
- Mounting hardware included (including 2 keys)
- Drivers side & passenger side striker latches (83514 / 83515)
- Genuine Leer twist lock
- See more on Amazon...
Brand: LEER | Manufacturer: Leer
See On Amazon #2
C1608055 19.7 inch 120Lbs Shock Struts for are Leer Truck Bed Tonneau Cover RV Bed Lift Camper Shell, Shed Window Floor Hatch Door, and Other DIY Applications, Set of 2 Vepagoo.
Asin: B078T6SCW8 | Model: vepa0205A | PartNumber: vepa0205A | Ean: 0603728610836 | UPC: 603728610836
[Need Know] If You Used These Gas Shocks As A Replacement For The Truck Tonneau Cover Or Trailer Cover, You Have To Compare The Length Of Your Original Gas Spring' Compression And Extension, Type Of Connector, And Lift Capability Before Purchasing..
[12+1 Month Replacement Service] Welcome To Click "Ask Seller" Beside Your Order For In-Time Assistance If Any Problem Occurs..
[Tips] 120Lb Per Strut, Two Are 240Lb. Super Strong!! You Couldn’T Compress It By Your Hand! Suitable For Lids Or Doors Weighing Between 100B And 150Lb. Don't Buy For A Lightweight Project Less Than 80Lb. If You Think These 120Lb Gas Shocks Are Too Strong Or Too Heavy For Your Project, Please Contact Us For A More Suitable One..
[Parameter] Interchange Part Number C16-08055 C1608055. Extended Length:19.69", Compressed Length: 12.20"; End Fittings:10Mm Nylon Ball Sockets. Mounting Bracket Needed (Not Included ): 10Mm Ball Stud Mounting Bracket..
Features
- [APPLICATION] 20in 120lb per gas shock compatible with queen bed oversize mattress, ARE Leer truck pickup bed tonneau Cover, camper bed, travel trailer bed, murphy bed, shed window, and other heavy-duty DIY appliacation.
- [PARAMETER] Interchange Part Number C16-08055 C1608055. Extended Length:19.69, compressed Length: 12.20; End Fittings:10mm Nylon Ball Sockets. Mounting bracket needed (Not INCLUDED ): 10mm Ball Stud Mounting Bracket.
- [NEED KNOW] If you used these gas shocks as a replacement for the Truck Tonneau Cover or Trailer cover, you have to compare the length of your original gas spring' compression and extension, type of connector, and lift capability before purchasing.
- [TIPS] 120lb Per strut, two are 240lb. Super strong!! You couldn t compress it by your hand! Suitable for lids or doors weighing between 100b and 150lb. Don't buy for a lightweight project less than 80LB. If you think these 120lb gas shocks are too STRONG or too HEAVY for your PROJECT, please contact us for a more suitable one.
- [12+1 MONTH REPLACEMENT SERVICE] Welcome to Click Ask Seller BESIDE YOUR ORDER for In-time Assistance if any problem occurs.
- See more on Amazon...
Brand: Vepagoo | Manufacturer: Vepagoo
See On Amazon #3
2 Truck Upfitters 16" Gas Props (15.7" Extended, 9.4" Compressed, 38 pounds of Pressure ea) for are, ATC, Snugtop, Leer Camper Shell/Truck Cap Rear Door. Measurement Required! Incl 4 Ball mounts!
Asin: B01K1I47J0 | Model: 16”, 38 lbs | PartNumber: 16”, 38 lbs | Ean: 0709832096419 | UPC: 709832096419
These Gas Lift Cylinders Do Not Fit All Truck Cap/Camper Shell Brands/Models. Measure Your Strut From Center Of Socket To Center Of Socket When Fully Opened & Fully Closed To Get Accurate Measurement. See Pictures To Determine How To Measure. Do Not Measure From End To End. Measurement Must Be From The Center Of Plastic Ball Mount On Each End Of The Gas Spring Lift. Measurement Is Important To Ensure They Open Properly And Get A Good Camper Shell Seal Against The Camper Shell Gasket When Closed..
Equivalent To Suspa # C16-09209 Or Stabilus # 01824. These Camper Shell Shocks Are Compatible With Many Truck Canopy Types, Including Leer Truck Cap Parts, Are Truck Topper Parts, Glasstite Parts, Century Parts, Snugtop Replacement Parts Astro Tops, Atc Campers, And Many Other Fiberglass Brands That Utilize Gas Shocks / Gas Springs / Gas Lift Cylinders. Compatible With Many Gas Lift Brands, Including Stabilus, Lift O Mat, And Suspa. These Are Oem Quality And Perfect Fit For Your Topper!.
Comes With Four 10Mm Ball Mounts For Alternate 'Other Than Truck Camper Shell' Applications, Such As In Camper / Canopy Windoors, Rv Doors And Awnings, Boat Hatch Spring Lifts, Gas Struts For Cabinets, Storage Bed Lifts, Toolbox Struts, Etc. These Gas Shock Lift Supports Cannot Be Compressed By Hand. These Gas Props Must Be Installed In The Extended / Open Position. It Is Nearly Impossible To Install Them In The Closed Position. Please Refer To The Install Video For Guidance On How To Install..
Truck Upfitters Pair Of 38 Pound (Each) Gas Struts. 15.7" Extended Length And 9.4" Compressed Length. This Size Of Door Shock Absorber Is For Tall Medium Weight Rear Or Side Camper Shell Doors. Each Canopy Shock Has 38 Lbs Of Pressure, For A Total Of 76 Lbs Of Pressure. Please Note That This Does Not Mean That It Can Lift Something That Is 76 Lbs. The Typical Hinged-Style Door Weight For This Prop Is Approximately 50-70 Lbs, Including The Weight Of The Camper Shell Locks And Keys..
Features
- CHECK LENGTHS AND PRESSURE BEFORE ORDERING. THESE DO NOT FIT ALL CANOPY and COVERS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE! Use a measuring tape to measure the door gas strut that you are replacing. Measure from the CENTER of the gas prop head (little plastic end), to the other side. DO NOT measure from the end of the gas prop, your measurement will be too long. Note that most applications allow for 1-5% size variation.
- Truck Upfitters Pair of 38 pound (each) gas struts. 15.7 extended length and 9.4 compressed length. This size of door shock absorber is for tall medium weight rear or side camper shell doors. Each canopy shock has 38 lbs of pressure, for a total of 76 lbs of pressure. Please note that this does not mean that it can lift something that is 76 lbs. the typical hinged-style door weight for this prop is approximately 50-70 lbs, including the weight of the camper shell locks and keys.
- These gas lift cylinders do not fit all truck cap/camper shell brands/models. Measure your strut from center of socket to center of socket when fully opened & fully closed to get accurate measurement. See pictures to determine how to measure. Do NOT measure from end to end. Measurement must be from the center of plastic ball mount on each end of the gas spring lift. Measurement is important to ensure they open properly and get a good camper shell seal against the camper shell gasket when closed.
- Comes with four 10mm ball mounts for alternate 'other than truck camper shell' applications, such as in camper / canopy windoors, RV doors and awnings, boat hatch spring lifts, gas struts for cabinets, storage bed lifts, toolbox struts, etc. These gas shock lift supports CANNOT be compressed by hand. These gas props MUST be installed in the EXTENDED / OPEN position. It is nearly impossible to install them in the CLOSED position. Please refer to the install video for guidance on how to install.
- Equivalent to Suspa # c16-09209 or Stabilus # 01824. These camper shell shocks are compatible with many truck canopy types, including LEER truck cap parts, ARE truck topper parts, Glasstite parts, Century parts, Snugtop replacement parts Astro tops, ATC campers, and many other fiberglass brands that utilize gas shocks / gas springs / gas lift cylinders. Compatible with many gas lift brands, including stabilus, lift o mat, and Suspa. These are OEM quality and perfect fit for your topper!
- See more on Amazon...
Brand: Truck Upfitters | Manufacturer: Truck Upfitters
Dimensions: 0.50 x 16.00 x 0.50 inches | Weight: 0.75 Pounds
See On Amazon #4
Vanshly 1 Pair 83515 & 83514 Truck Cap Rotary Latch Compatible with Leer 100XL/XR/XQ/180XL 700 tonneau
Asin: B0CMCM77MJ | Model: Leer 100XL/XR/XQ/180XL 700 tonneau | PartNumber: Leer 100XL/XR/XQ/180XL 700 tonneau
√【Fitment Type】Direct Replacement.
√【Service】If You Encounter Problems During The Installation Process, Please Contact Us Immediately..
√【Package Include】This Kit Will Come With A Both Driver Side And Passenger Side Latch And No Hardware.
√【Compatible With 】These Are Used On Leer 100Xr, 100Xl And 100Xq 180Xl Truck Caps. They Are Also Used On The Leer 700 Fiberglass Tonneau Cover..
Features
- Part Number 83515 driver side and #83514 passenger side
- Compatible with These are used on Leer 100XR, 100XL and 100XQ 180XL truck caps. They are also used on the Leer 700 fiberglass tonneau cover.
- Fitment Type Direct Replacement
- Package Include This kit will come with a both driver side and passenger side latch and no hardware
- Service If you encounter problems during the installation process, please contact us immediately.
- See more on Amazon...
Brand: Vanshly | Manufacturer: Vanshly
See On Amazon #5
2 Truck Upfitters 16" Gas Props (15.7" Extended, 9.4" Compressed, 45 pounds of Pressure ea) for are, ATC, Snugtop, Leer Camper Shell/Truck Cap Rear Door. Measurement Required! Incl 4 Ball mounts!
Asin: B07F946Z1V | Model: 157094-45-10 | PartNumber: 157094-45-10
These Gas Lift Cylinders Do Not Fit All Camper Shell Brands / Models. Measure Your Strut From Center Of Socket To Center Of Socket When Fully Opened & Fully Closed To Get Accurate Measurement. Please See Pictures To Determine How To Measure. Do Not Measure From End To End. Measurement Must Be From The Center Of Plastic Ball Mount On Each End Of The Gas Spring Lift. Measurement Is Important To Ensure They Open Properly And Get A Good Camper Shell Seal Against The Camper Shell Gasket When Closed..
Equivalent To Suspa # C16-23993 Or Stabilus #14269. These Camper Shell Shocks Are Compatible With Many Truck Canopy Types, Including Leer Truck Cap Parts, Are Truck Topper Parts, Glasstite Parts, Century Parts, Snugtop Replacement Parts Astro Tops, Atc Campers, And Many Other Fiberglass Brands That Utilize Gas Shocks / Gas Springs / Gas Lift Cylinders. Compatible With Many Gas Lift Brands, Including Stabilus, Lift O Mat, And Suspa. These Are Oem Quality And Perfect Fit For Your Topper!.
Comes With Four 10Mm Ball Mounts For Alternate 'Other Than Truck Camper Shell' Applications, Such As In Camper / Canopy Windoors, Rv Doors And Awnings, Boat Hatch Spring Lifts, Gas Struts For Cabinets, Storage Bed Lifts, Toolbox Struts, Etc. These Gas Shock Lift Supports Cannot Be Compressed By Hand. These Gas Props Must Be Installed In The Extended / Open Position. It Is Nearly Impossible To Install Them In The Closed Position. Please Refer To The Install Video For Guidance On How To Install..
Truck Upfitters Pair Of 45 Pound (Each) Gas Struts. 15.7" Extended Length And 9.4" Compressed Length. This Size Of Door Shock Absorber Is For Medium Height And Weight Rear Or Side Camper Shell Doors. Each Canopy Shock Has 45 Lbs Of Pressure, For A Total Of 90 Lbs Of Pressure. Please Note That This Does Not Mean That It Can Lift Something That Is 90 Lbs. The Typical Hinged-Style Door Weight For This Prop Is Approximately 60-80 Lbs, Including The Weight Of The Camper Shell Locks And Keys..
Features
- CHECK LENGTHS AND PRESSURE BEFORE ORDERING. THESE DO NOT FIT ALL CANOPY and COVERS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE! Use a measuring tape to measure the door gas strut that you are replacing. Measure from the CENTER of the gas prop head (little plastic end), to the other side. DO NOT measure from the end of the gas prop, your measurement will be too long. Note that most applications allow for 1-5% size variation.
- Truck Upfitters Pair of 45 pound (each) gas struts. 15.7 extended length and 9.4 compressed length. This size of door shock absorber is for medium height and weight rear or side camper shell doors. Each canopy shock has 45 lbs of pressure, for a total of 90 lbs of pressure. Please note that this does not mean that it can lift something that is 90 lbs. the typical hinged-style door weight for this prop is approximately 60-80 lbs, including the weight of the camper shell locks and keys.
- These gas lift cylinders do not fit all camper shell brands / models. Measure your strut from center of socket to center of socket when fully opened & fully closed to get accurate measurement. Please see pictures to determine how to measure. Do NOT measure from end to end. Measurement must be from the center of plastic ball mount on each end of the gas spring lift. Measurement is important to ensure they open properly and get a good camper shell seal against the camper shell gasket when closed.
- Comes with four 10mm ball mounts for alternate 'other than truck camper shell' applications, such as in camper / canopy windoors, RV doors and awnings, boat hatch spring lifts, gas struts for cabinets, storage bed lifts, toolbox struts, etc. These gas shock lift supports CANNOT be compressed by hand. These gas props MUST be installed in the EXTENDED / OPEN position. It is nearly impossible to install them in the CLOSED position. Please refer to the install video for guidance on how to install.
- Equivalent to Suspa # c16-23993 or Stabilus #14269. These camper shell shocks are compatible with many truck canopy types, including LEER truck cap parts, ARE truck topper parts, Glasstite parts, Century parts, Snugtop replacement parts Astro tops, ATC campers, and many other fiberglass brands that utilize gas shocks / gas springs / gas lift cylinders. Compatible with many gas lift brands, including stabilus, lift o mat, and Suspa. These are OEM quality and perfect fit for your topper!
- See more on Amazon...
Brand: Truck Upfitters | Manufacturer: Truck Upfitters
Dimensions: 0.50 x 16.00 x 0.50 inches
See On Amazon #6
C1620651 18.5" 40 Lb Gas Strut Shock Spring Lift Support for Leer ARE ATC Camper Topper Rear Window Truck Cap Camper Shell Canopy, Pack of 2PCS.
Asin: B08X4NJCRX | Ean: 0746827168034 | UPC: 746827168034
🌳18.5 Inch 40Lbs/178N Window Struts🌳--Vepagoo Gas Shock Struts Fit For Leer/Are/Tonneau Camper Shell Rear Window Topper Door Tonneau Cover Lift Supports Rv Truck Car's Window And So On..
🌳18.5 Inch 40Lbs/178N Window Struts🌳--End Fiting: 10Mm Ball Stud Sockets.
🌳18.5 Inch 40Lbs/178N Window Struts🌳---Interchange Part Number C1620651. Easy To Install, No Special Tools Required..
🌳18.5 Inch 40Lbs/178N Window Struts🌳--Compressed Length (Center-To-Center): 10.7In (275Mm), Extended Length (Center-To-Center): 18.5In (475Mm), Force: 40 Lbs (178 N) (Per Strut).
Features
- 18.5 inch 40Lbs/178N Shocks Struts --A NEW PACKAGE will be offered if any quality defects occur. Welcome to Click "Ask Seller" Besides Your Order for In-time Assistance!
- 18.5 inch 40Lbs/178N Window Struts --Compressed Length (Center-to-Center): 10.7in (275mm), Extended Length (Center-to-Center): 18.5in (475mm), Force: 40 Lbs (178 N) (Per Strut)
- 18.5 inch 40Lbs/178N Window Struts --Vepagoo gas shock struts fit for Leer/ARE/Tonneau Camper shell rear window topper door Tonneau Cover lift supports RV Truck Car's window and so on.
- 18.5 inch 40Lbs/178N Window Struts ---Interchange Part Number C1620651. Easy to install, no special tools required.
- 18.5 inch 40Lbs/178N Window Struts --End Fiting: 10mm Ball Stud Sockets
- See more on Amazon...
Brand: Vepagoo | Manufacturer: Vepagoo
See On Amazon #7
C16-06389 14 inch 24Lbs/108N Gas Shocks Struts Lift Support for Leer Camper Shell Truck Topper Rear Window, Pickup Toolbox Lid Door, Set of 2 Vepagoo.
Asin: B088HCRLKY | Model: SH051000202A:ST | PartNumber: SH051000202A:ST | Ean: 0603728610621 | UPC: 603728610621
✅[Note] Please Confirm The Length Before Ordering. Measure The Distance From The Center Of The Upper Socket To The Center Of The Lower Socket Respectively..
✅[12+1 Month Replacement Service] Welcome To Click "Ask Seller" Beside Your Order For In-Time Assistance If Any Problem Occurs..
✅[Interchange Part Number ] C16-06389 Stabilus #025647. Easy To Install, No Special Tools Required. End Fiting: 10Mm Ball Stud Sockets..
✅[Parameter] Compressed Length (Center-To-Center): 8.9" (226Mm), Extended Length (Center-To-Center): 13.98" (355Mm), Force: 24 Lbs, Both Are 48Lb..
Features
- [Most used for]14 inch 24Lbs/108N gas shock struts compatible with Leer ARE camper shell truck canopy topper rear window, truck pickup toolbox lid door.
- [Parameter] Compressed Length (Center-to-Center): 8.9 (226mm), Extended Length (Center-to-Center): 13.98 (355mm), Force: 24 Lbs, both are 48lb.
- [Note] Please confirm the length before ordering. Measure the distance from the center of the upper socket to the center of the lower socket respectively.
- [Interchange Part Number ] C16-06389 Stabilus #025647. Easy to install, no special tools required. End Fiting: 10mm Ball Stud Sockets.
- [12+1 Month Replacement Service] Welcome to Click Ask Seller BESIDE YOUR ORDER for In-time Assistance if any problem occurs.
- See more on Amazon...
Brand: Vepagoo | Manufacturer: Vepagoo
See On Amazon #8
(2 Pcs) Truck Cap Replace for LEER # 92579 Rotary Latch Cables for Leer 100XL/100XR/100XQ and for Century
Asin: B0CD45QZT7 | Model: 92579 | PartNumber: 92579
✅Manufacturer Part Number: 92579.
✅High Quality And Perfect Matching.Cable Length Is Approximately 36" Long And You Will Receive 2 Cables With This Listing.
✅Service:All Products Have Been Inspected And Tested.If Any Issue Arises With The Product,Rest Assured That We Are Here To Assist You Promptly And Without Hesitation.
✅Fitment Type: Direct Replacement.
✅Item Type: 2 Rotary Latch Cables！.
Features
- Color: Black
- Item Type: 2 Rotary Latch Cables
- Manufacturer Part Number: 92579
- Fitment Type: Direct Replacement
- High quality and perfect matching.Cable length is approximately 36 long and you will receive 2 cables with this listing
- Service:All products have been inspected and tested.If any issue arises with the product,rest assured that we are here to assist you promptly and without hesitation
- See more on Amazon...
Brand: Camotokiit | Manufacturer: Camotokiit
Warranty: 90 Days
See On Amazon #9
C1602622 17 inch 28lb/124N Gas Struts Shocks Spring Lift Support for Leer Camper Shell Topper Rear Windows Door Truck Cap Toolbox Canopy Struts Replacement Part, C1615041 c1615070, Set of 2 by HUOPO
Asin: B0B7RTHL8T | Ean: 0746827176909 | UPC: 746827176909
【17 Inch Gas Shock Interchange Number】 Find The Below Interchange Number On Your Oem Gas Shock Cylinders For A Exact Match: C1602622 C1615041 C1615070 C16-15070 C16-02622 C16-15041 012187 10382 1591Er 1651Eh 2146Ba 2944Ex 3044Ey 3355Hh 3416Ee 3497Yg 3529Ed 3813Lr 3818La 4383Kg 4527Br 5003022812 5152Ki 520030 5375Ru 6126Kz 6147Br 6323Ih 6909 72090 74820Sca003 7856Im 8195518 8392Qd 901218 9570 Bpg3012..
【13 Months Replacement Warranty】 Huopo Offer A 13-Month Replacement Service. Let Us Know Your Concerns About Huopo Products. Contact Us Via Amazon Mail. Our Customer Service Team Will Respond Quickly And Within 12 Hours To Give You A Pleasant Shopping Experience..
【C16-02622 Gas Struts Package Content】Package Contains 17In Gas Springs*2. Installation With A Flat Screwdriver, No Special Tools Required..
【C1602622 Struts Specifications】 17In 28Lb/124N Gas Struts Shocks Spring Lift Support. Extended Length 17Inch. Compressed Length 10.80Inch. The 17 Inch Gas Struts Connector Is 10Mm Nylon Socket Type. End Fitting 10Mm Ball Stud. Warm Tips: The 28Lb Gas Struts Is So Strong That You Can't Compress It By Hand..
Features
- Truck Camper Shell Replacement Part Gas shock spring strut for leer camper shell topper rear windows door truck cap toolbox canopy cover. Please compare the interchange number and dimensions with the OEM gas spring before purchasing.
- C1602622 Struts Specifications 17in 28lb/124N Gas Struts Shocks Spring Lift Support. Extended Length 17inch. Compressed Length 10.80inch. The 17 inch gas struts connector is 10mm Nylon Socket type. End fitting 10mm ball stud. WARM TIPS: The 28lb gas struts is so strong that you can't compress it by hand.
- 17 inch Gas Shock Interchange Number Find the below Interchange number on your OEM Gas shock Cylinders for a exact match: C1602622 C1615041 C1615070 C16-15070 C16-02622 C16-15041 012187 10382 1591ER 1651EH 2146BA 2944EX 3044EY 3355HH 3416EE 3497YG 3529ED 3813LR 3818LA 4383KG 4527BR 5003022812 5152KI 520030 5375RU 6126KZ 6147BR 6323IH 6909 72090 74820SCA003 7856IM 8195518 8392QD 901218 9570 BPG3012.
- C16-02622 Gas Struts Package Content Package contains 17in gas springs*2. Installation with a flat screwdriver, no special tools required.
- 13 Months Replacement Warranty HUOPO offer a 13-month replacement service. Let us know your concerns about Huopo products. Contact us via Amazon Mail. Our customer service team will respond quickly and within 12 hours to give you a pleasant shopping experience.
- See more on Amazon...
Brand: HUOPO | Manufacturer: HUOPO
See On Amazon #10
2 Truck Upfitters 17" Gas Props (17.1" Extended, 9.9" Compressed, 45 pounds of Pressure ea) for are, ATC, Snugtop, Leer Camper Shell/Truck Cap Rear Door. Measurement Required! Incl 4 Ball mounts!
Asin: B074MF3HMP | Model: 17”, 45 lbs | PartNumber: 17”, 45 lbs | Ean: 0709832096785 | UPC: 709832096785
These Gas Lift Cylinders Do Not Fit All Camper Shell Brands / Models. Measure Your Strut From Center Of Socket To Center Of Socket When Fully Opened & Fully Closed To Get Accurate Measurement. Please See Pictures To Determine How To Measure. Do Not Measure From End To End. Measurement Must Be From The Center Of Plastic Ball Mount On Each End Of The Gas Spring Lift. Measurement Is Important To Ensure They Open Properly And Get A Good Camper Shell Seal Against The Camper Shell Gasket When Closed..
Equivalent To Suspa # C16-04270 Or Stabilus # 1822. These Camper Shell Shocks Are Compatible With Many Truck Canopy Types, Including Leer Truck Cap Parts, Are Truck Topper Parts, Glasstite Parts, Century Parts, Snugtop Replacement Parts Astro Tops, Atc Campers, And Many Other Fiberglass Brands That Utilize Gas Shocks / Gas Springs / Gas Lift Cylinders. Compatible With Many Gas Lift Brands, Including Stabilus, Lift O Mat, And Suspa. These Are Oem Quality And Perfect Fit For Your Topper!.
Comes With Four 10Mm Ball Mounts For Alternate 'Other Than Truck Camper Shell' Applications, Such As In Camper / Canopy Windoors, Rv Doors And Awnings, Boat Hatch Spring Lifts, Gas Struts For Cabinets, Storage Bed Lifts, Toolbox Struts, Etc. These Gas Shock Lift Supports Cannot Be Compressed By Hand. These Gas Props Must Be Installed In The Extended / Open Position. It Is Nearly Impossible To Install Them In The Closed Position. Please Refer To The Install Video For Guidance On How To Install..
Truck Upfitters Pair Of 45 Pound (Each) Gas Struts. 17.1" Extended Length And 9.9" Compressed Length. This Size Of Door Shock Absorber Is For Tall Medium Weight Rear Or Side Camper Shell Doors. Each Canopy Shock Has 45 Lbs Of Pressure, For A Total Of 90 Lbs Of Pressure. Please Note That This Does Not Mean That These Gas Lift Shocks Can Lift Something That Is 90 Lbs. The Typical Hinged-Style Door Weight For This Prop Is Approx 60-80 Lbs, Including The Weight Of The Camper Shell Locks & Keys..
Features
- CHECK LENGTHS AND PRESSURE BEFORE ORDERING. THESE DO NOT FIT ALL CANOPY and COVERS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE! Use a measuring tape to measure the door gas strut that you are replacing. Measure from the CENTER of the gas prop head (little plastic end), to the other side. DO NOT measure from the end of the gas prop, your measurement will be too long. Note that most applications allow for 1-5% size variation.
- Truck Upfitters Pair of 45 pound (each) gas struts. 17.1 extended length and 9.9 compressed length. This size of door shock absorber is for tall medium weight rear or side camper shell doors. Each canopy shock has 45 lbs of pressure, for a total of 90 lbs of pressure. Please note that this does not mean that these gas lift shocks can lift something that is 90 lbs. the typical hinged-style door weight for this prop is approx 60-80 lbs, including the weight of the camper shell locks & keys.
- These gas lift cylinders do not fit all camper shell brands / models. Measure your strut from center of socket to center of socket when fully opened & fully closed to get accurate measurement. Please see pictures to determine how to measure. Do NOT measure from end to end. Measurement must be from the center of plastic ball mount on each end of the gas spring lift. Measurement is important to ensure they open properly and get a good camper shell seal against the camper shell gasket when closed.
- Comes with four 10mm ball mounts for alternate 'other than truck camper shell' applications, such as in camper / canopy windoors, RV doors and awnings, boat hatch spring lifts, gas struts for cabinets, storage bed lifts, toolbox struts, etc. These gas shock lift supports CANNOT be compressed by hand. These gas props MUST be installed in the EXTENDED / OPEN position. It is nearly impossible to install them in the CLOSED position. Please refer to the install video for guidance on how to install.
- Equivalent to Suspa # C16-04270 or Stabilus # 1822. These camper shell shocks are compatible with many truck canopy types, including LEER truck cap parts, ARE truck topper parts, Glasstite parts, Century parts, Snugtop replacement parts Astro tops, ATC campers, and many other fiberglass brands that utilize gas shocks / gas springs / gas lift cylinders. Compatible with many gas lift brands, including stabilus, lift o mat, and Suspa. These are OEM quality and perfect fit for your topper!
- See more on Amazon...
Brand: Truck Upfitters | Manufacturer: Truck Upfitters
Dimensions: 1.00 x 18.00 x 2.00 Inches | Weight: 0.81 pounds
See On Amazon #11
2 Truck Upfitters 12" Gas Props (12.2" ext, 7.5" comp, 40 lbs ea) for are Snugtop Leer Camper Doors & ONLY Aluminum Weatherguard ONLY Toolboxes. Measurement REQ'D! Incl 4 Ball mounts!
Asin: B074PYKFCY | Model: 12”, 40 lbs | PartNumber: 12”, 40 lbs | Ean: 0709832096709 | UPC: 709832096709
These Gas Lift Cylinders Do Not Fit All Camper Shell Brands / Models. Measure Your Strut From Center Of Socket To Center Of Socket When Fully Opened & Fully Closed To Get Accurate Measurement. Please See Pictures To Determine How To Measure. Do Not Measure From End To End. Measurement Must Be From The Center Of Plastic Ball Mount On Each End Of The Gas Spring Lift. Measurement Is Important To Ensure They Open Properly And Get A Good Camper Shell Seal Against The Camper Shell Gasket When Closed..
Not For Steel Toolboxes- Will Not Hold Up Lid. Fit Most Weatherguard Aluminum Truck Bed Toolboxes Only, Models 121-0-01, 121-5-01, 123-0-01, 123-5-01, 127-0-01, 127-5-01, 131-0-01, 131-5-01, 137-0-01, 137-5-01, 147-0-01, 147-5-01, 154-0-01, 154-5-01. Compatible With Many Truck Canopy Types, Including Leer, Are, Century, Snugtop, And Atc Tops, & Many Other Brands That Utilize Gas Shocks / Gas Springs / Gas Lifts. Compatible With Many Gas Lift Brands, Including Stabilus, Lift O Mat, & Suspa..
Equivalent To Suspa #C16-11028, Stabilus #19068, Or Weatherguard 7009-2Pk . Comes With Four 10Mm Ball Mounts For Alternate 'Other Than Truck Camper Shell' Applications, Such As In Camper / Canopy Windoors, Rv Doors & Awnings, Boat Hatch Spring Lifts, Gas Struts For Cabinets, Storage Bed Lifts, Other Toolbox Struts, Etc. These Gas Shock Lift Supports Can't Be Compressed By Hand. They Must Be Installed In The Extended / Open Position. It Is Nearly Impossible To Install Them In The Closed Position..
Truck Upfitters Pair (2 Total) Of 40 Pound (Each) Gas Struts. 12.2" Extended Length And 7.5" Compressed Length. This Size Of Door Shock Absorber Is For Tall Medium Weight Rear Or Side Camper Shell Doors. Each Canopy Shock Has 40 Lbs Of Pressure, For A Total Of 80 Lbs Of Pressure. Please Note That This Does Not Mean That It Can Lift Something That Is 80 Lbs. The Typical Hinged-Style Door Weight For This Prop Is Approximately 50-70 Lbs, Including The Weight Of The Camper Shell Locks And Keys..
Features
- CHECK LENGTHS AND PRESSURE BEFORE ORDERING. THESE DO NOT FIT ALL CANOPY and COVERS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE! Use a measuring tape to measure the door gas strut that you are replacing. Measure from the CENTER of the gas prop head (little plastic end), to the other side. DO NOT measure from the end of the gas prop, your measurement will be too long. Note that most applications allow for 1-5% size variation.
- Truck Upfitters Pair (2 total) of 40 pound (each) gas struts. 12.2 extended length and 7.5 compressed length. This size of door shock absorber is for tall medium weight rear or side camper shell doors. Each canopy shock has 40 lbs of pressure, for a total of 80 lbs of pressure. Please note that this does not mean that it can lift something that is 80 lbs. the typical hinged-style door weight for this prop is approximately 50-70 lbs, including the weight of the camper shell locks and keys.
- These gas lift cylinders do not fit all camper shell brands / models. Measure your strut from center of socket to center of socket when fully opened & fully closed to get accurate measurement. Please see pictures to determine how to measure. Do NOT measure from end to end. Measurement must be from the center of plastic ball mount on each end of the gas spring lift. Measurement is important to ensure they open properly and get a good camper shell seal against the camper shell gasket when closed.
- Equivalent to Suspa #C16-11028, Stabilus #19068, or Weatherguard 7009-2PK . Comes with four 10mm ball mounts for alternate 'other than truck camper shell' applications, such as in camper / canopy windoors, RV doors & awnings, boat hatch spring lifts, gas struts for cabinets, storage bed lifts, other toolbox struts, etc. These gas shock lift supports CAN'T be compressed by hand. They MUST be installed in the EXTENDED / OPEN position. It is nearly impossible to install them in the CLOSED position.
- NOT FOR STEEL TOOLBOXES- WILL NOT HOLD UP LID. Fit most Weatherguard ALUMINUM truck bed toolboxes ONLY, models 121-0-01, 121-5-01, 123-0-01, 123-5-01, 127-0-01, 127-5-01, 131-0-01, 131-5-01, 137-0-01, 137-5-01, 147-0-01, 147-5-01, 154-0-01, 154-5-01. Compatible with many truck canopy types, including LEER, ARE, Century, Snugtop, and ATC tops, & many other brands that utilize gas shocks / gas springs / gas lifts. Compatible with many gas lift brands, including stabilus, lift o mat, & Suspa.
- See more on Amazon...
Brand: Truck Upfitters | Manufacturer: Truck Upfitters
Dimensions: 2.00 x 12.50 x 0.50 Inches | Weight: 0.69 Pounds
See On Amazon #12
LEER ROLLITUP | Fits 2010-2023 GM Chevy Silverado/GMC Sierra 2500/3500 with 6'9" Bed | Soft Rolling Truck Bed Tonneau Cover | Easy Install | 4R320
Asin: B09235DGJL | Model: 4R320 | PartNumber: 4R320 | Ean: 0810059880092 | UPC: 810059880092
Full Visibility: Allows Full Rear Visibility And Easy To Remove For Full Truck Bed Access.
Fitment – Please Double Check That Your Truck’S Year, Make, Model, And Bed Length Fit This Application Before Purchasing..
High Quality Construction: Made Of Weather Resistant, Padded Polymer Bonded To Aluminum Panels For Ultimate Look And Security. Cover Is Gloss Black Powder Coat With Flush, Low-Profile Rails..
Features
- EASY TO OPERATE: Convenient pull strap with Continuous Tension Spring that helps the cover retract smoothly in seconds. Opens by pinch latch. Locks in open or closed position.
- HIGH QUALITY CONSTRUCTION: Made of weather resistant, padded polymer bonded to aluminum panels for ultimate look and security. Cover is gloss black powder coat with flush, low-profile rails.
- FULL VISIBILITY: Allows full rear visibility and easy to remove for full truck bed access
- FITMENT Please double check that your truck s year, make, model, AND bed length fit this application before purchasing.
- See more on Amazon...
Brand: LEER | Manufacturer: LEER
See On Amazon #13
Fit LEER Tonneau Cover 700 and 550 Series Pair of Black C Striker Plates # 80351
Asin: B0CD7RZN5G | Model: tonneau cover hardware | PartNumber: tonneau cover hardware
Manufacturer Part Number: 80351.
Includes (2) # 80351 C Striker Plates.
Mounting Hardware Included: No.
Color: Black.
Features
- Item Type: tonneau cover hardware
- Color: Black
- Manufacturer Part Number: 80351
- Mounting Hardware Included: No
- Includes (2) # 80351 C striker plates
- See more on Amazon...
Brand: Camotokiit | Manufacturer: Camotokiit
Warranty: 90 Days
See On Amazon #14
C16-04445 17" 55Lbs/244N Gas Shocks Struts for Leer are Camper Shell Truck Topper Rear Window, Pickup Cab Canopy Door, Set of 2 Vepagoo
Asin: B08JYZ33JL | Model: SUVELAM | PartNumber: SUVELAM | Ean: 0746827165156 | UPC: 746827165156
🍎[Note] Please Compare The Length Of Your Original Gas Spring' Compression And Extension, Type Of Connector, And Lift Capability Before Purchasing..
🍎[12+1 Months Replacement Service] Welcome To Click "Ask Seller" Beside Your Order For In-Time Assistance If Any Problem Occurs..
🍎[Interchange Number] C16-04445 C16-04445, 1595Ey, 4514, 8195565, Ah8650, Ml1650, Ml16-50, Ml-16-50, Ml3650, Ml36-50, Ml-36-50, P2032, Se172p55, Se618a45ps130pm3, Se630v55, Se630v-55, Sl1650, Sl16-50, Sl-1650, Sl-16-50, Sl16501, Sl16-50-1, Sl-16501, Sl-16-50-1, Sl16505, Sl16-50-5, Sl-16505. Easy To Install, No Special Tools Required. End Fitting: 10Mm Sockets..
🍎[Parameter] Compressed Length (Center-To-Center):)10.6" (269Mm), Extended Length (Center-To-Center): 17.2"(437Mm, Force: 55 Lbs Per Strut, Two Are 110Lb..
Features
- [Most used for] C16-04445,17.2 inch 55Lbs/244N gas shock strut compatible with Leer ARE Top camper shell truck topper rear window, Truck Pickup Cab Canopy Door and other custom Applications.
- [Parameter] Compressed Length (Center-to-Center):)10.6 (269mm), Extended Length (Center-to-Center): 17.2(437mm, Force: 55 Lbs Per Strut, two are 110LB.
- [Note] Please compare the length of your original gas spring' compression and extension, type of connector, and lift capability before purchasing.
- [INTERCHANGE NUMBER] C16-04445 C16-04445, 1595EY, 4514, 8195565, AH8650, ML1650, ML16-50, ML-16-50, ML3650, ML36-50, ML-36-50, P2032, SE172P55, SE618A45PS130PM3, SE630V55, SE630V-55, SL1650, SL16-50, SL-1650, SL-16-50, SL16501, SL16-50-1, SL-16501, SL-16-50-1, SL16505, SL16-50-5, SL-16505. Easy to install, no special tools required. End Fitting: 10mm Sockets.
- [12+1 MONTHS REPLACEMENT SERVICE] Welcome to Click Ask Seller BESIDE YOUR ORDER for In-time Assistance if any problem occurs.
- See more on Amazon...
Brand: Vepagoo | Manufacturer: Vepagoo
See On Amazon #15
2 Truck Upfitters 16" Gas Props (15.7" ext, 9.4" Compressed, 55 lbs of Pressure ea) Compatible with are, ATC, Snugtop, Leer Campers. Measurement REQ'D! Incl 4 Ball mounts+Angled & Straight Fittings!
Asin: B07PRZKWY8 | Model: 16”, 55 lbs | PartNumber: 16”, 55 lbs
These Gas Lift Cylinders Do Not Fit All Camper Shell Brands / Models. Measure Your Strut From Center Of Socket To Center Of Socket When Fully Opened & Fully Closed To Get Accurate Measurement. Please See Pictures To Determine How To Measure. Do Not Measure From End To End. Measurement Must Be From The Center Of Plastic Ball Mount On Each End Of The Gas Spring Lift. Measurement Is Important To Ensure They Open Properly And Get A Good Camper Shell Seal Against The Camper Shell Gasket When Closed..
Compatible With Suspa # C16-23994 & Compatible With Stabilus # 025657 These Camper Shell Shocks Are Compatible With Many Truck Canopy Types, Including Leer Truck Cap Parts, Are Truck Topper Parts, Century Parts, Snugtop Replacement Parts Astro Tops, Atc Campers, And Many Other Fiberglass Brands That Utilize Gas Shocks / Gas Springs / Gas Lift Cylinders. Compatible With Many Gas Lift Brands, Including Stabilus, Lift O Mat, And Suspa. These Are Oem Quality And Perfect Fit For Your Topper!.
Comes With Four 10Mm Ball Mounts For Alternate 'Other Than Truck Camper Shell' Applications, Such As In Camper / Canopy Windoors, Rv Doors And Awnings, Boat Hatch Spring Lifts, Gas Struts For Cabinets, Storage Bed Lifts, Toolbox Struts, Etc. These Gas Shock Lift Supports Cannot Be Compressed By Hand. These Gas Props Must Be Installed In The Extended / Open Position. It Is Nearly Impossible To Install Them In The Closed Position. Please Refer To The Install Video For Guidance On How To Install..
Truck Upfitters Pair Of 55 Pound (Each) Gas Struts. 15.7" Extended Length And 9.4" Compressed Length. This Size Of Door Shock Absorber Is For Tall Medium/Heavy Weight Rear Or Side Camper Shell Doors. Each Canopy Shock Has 55 Lbs Of Pressure, For A Total Of 110 Lbs Of Pressure. Please Note That This Does Not Mean That It Can Lift Something That Is 110 Lbs. The Typical Hinged-Style Door Weight For This Prop Is Approximately 70-90 Lbs, Including The Weight Of The Camper Shell Locks And Keys..
Features
- CHECK LENGTHS AND PRESSURE BEFORE ORDERING. THESE DO NOT FIT ALL TOPS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE! Use a measuring tape to measure the door gas strut that you are replacing. Measure from the CENTER of the gas prop head (little plastic end), to the other side. DO NOT measure from the end of the gas prop, your measurement will be too long. Note that most applications allow for 1-5% size variation.
- Truck Upfitters Pair of 55 pound (each) gas struts. 15.7 extended length and 9.4 compressed length. This size of door shock absorber is for tall medium/heavy weight rear or side camper shell doors. Each canopy shock has 55 lbs of pressure, for a total of 110 lbs of pressure. Please note that this does not mean that it can lift something that is 110 lbs. the typical hinged-style door weight for this prop is approximately 70-90 lbs, including the weight of the camper shell locks and keys.
- These gas lift cylinders do not fit all camper shell brands / models. Measure your strut from center of socket to center of socket when fully opened & fully closed to get accurate measurement. Please see pictures to determine how to measure. Do NOT measure from end to end. Measurement must be from the center of plastic ball mount on each end of the gas spring lift. Measurement is important to ensure they open properly and get a good camper shell seal against the camper shell gasket when closed.
- Comes with four 10mm ball mounts for alternate 'other than truck camper shell' applications, such as in camper / canopy windoors, RV doors and awnings, boat hatch spring lifts, gas struts for cabinets, storage bed lifts, toolbox struts, etc. These gas shock lift supports CANNOT be compressed by hand. These gas props MUST be installed in the EXTENDED / OPEN position. It is nearly impossible to install them in the CLOSED position. Please refer to the install video for guidance on how to install.
- Compatible with Suspa # c16-23994 & compatible with Stabilus # 025657 These camper shell shocks are compatible with many truck canopy types, including LEER truck cap parts, ARE truck topper parts, Century parts, Snugtop replacement parts Astro tops, ATC campers, and many other fiberglass brands that utilize gas shocks / gas springs / gas lift cylinders. Compatible with many gas lift brands, including stabilus, lift o mat, and Suspa. These are OEM quality and perfect fit for your topper!
- See more on Amazon...
Brand: Truck Upfitters | Manufacturer: Truck Upfitters
Dimensions: 0.70 x 15.70 x 0.70 Inches | Weight: 1.00 Pounds
See On Amazon #16
2 Truck Upfitters 14" Gas Props (13.98" ext, 8.9" comp, 24 lbs ea) for are, Snugtop, Leer, ATC, Century Camper Doors. Measurement Required! Includes 4 Ball mounts!
Asin: B07FJHZK7K | Model: 139089-24-10 | PartNumber: 139089-24-10
These Gas Lift Cylinders Do Not Fit All Truck Cap/Camper Shell Brands/Models. Measure Your Strut From Center Of Socket To Center Of Socket When Fully Opened & Fully Closed To Get Accurate Measurement. See Pictures To Determine How To Measure. Do Not Measure From End To End. Measurement Must Be From The Center Of Plastic Ball Mount On Each End Of The Gas Spring Lift. Measurement Is Important To Ensure They Open Properly And Get A Good Camper Shell Seal Against The Camper Shell Gasket When Closed..
Compatible W/ Suspa #C16-06389 & C16-21682, Stabilus #025647. These Camper Shell Shocks Are Compatible With Many Truck Canopy Types, Including Leer Truck Cap Parts, Are Truck Topper Parts, Glasstite Parts, Century Parts, Snugtop Replacement Parts Astro Tops, Atc Campers, And Many Other Fiberglass Brands That Utilize Gas Shocks / Gas Springs / Gas Lift Cylinders. Compatible With Many Gas Lift Brands, Including Stabilus, Lift O Mat, And Suspa. These Are Oem Quality And Perfect Fit For Your Topper!.
Comes With Four 10Mm Ball Mounts For Alternate 'Other Than Truck Camper Shell' Applications, Such As In Camper / Canopy Windoors, Rv Doors And Awnings, Boat Hatch Spring Lifts, Gas Struts For Cabinets, Storage Bed Lifts, Toolbox Struts, Etc. These Gas Shock Lift Supports Cannot Be Compressed By Hand. These Gas Props Must Be Installed In The Extended / Open Position. It Is Nearly Impossible To Install Them In The Closed Position. Please Refer To The Install Video For Guidance On How To Install..
Truck Upfitters Pair (2 Total) Of 24 Pound (Each) Gas Struts. 13.9" Extended Length And 8.9" Compressed Length. This Size Of Door Shock Absorber Is For Short Light Weight Rear Or Side Camper Shell Doors. Each Canopy Shock Has 24 Lbs Of Pressure, For A Total Of 48 Lbs Of Pressure. Please Note That This Does Not Mean That It Can Lift Something That Is 48 Lbs. The Typical Hinged-Style Door Weight For This Prop Is Approximately 25-40 Lbs, Including The Weight Of The Camper Shell Locks And Keys..
Features
- CHECK LENGTHS AND PRESSURE BEFORE ORDERING. THESE DO NOT FIT ALL CANOPY and COVERS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE! Use a measuring tape to measure the door gas strut that you are replacing. Measure from the CENTER of the gas prop head (little plastic end), to the other side. DO NOT measure from the end of the gas prop, your measurement will be too long. Note that most applications allow for 1-5% size variation.
- Truck Upfitters Pair (2 total) of 24 pound (each) gas struts. 13.9 extended length and 8.9 compressed length. This size of door shock absorber is for short light weight rear or side camper shell doors. Each canopy shock has 24 lbs of pressure, for a total of 48 lbs of pressure. Please note that this does not mean that it can lift something that is 48 lbs. the typical hinged-style door weight for this prop is approximately 25-40 lbs, including the weight of the camper shell locks and keys.
- These gas lift cylinders do not fit all truck cap/camper shell brands/models. Measure your strut from center of socket to center of socket when fully opened & fully closed to get accurate measurement. See pictures to determine how to measure. Do NOT measure from end to end. Measurement must be from the center of plastic ball mount on each end of the gas spring lift. Measurement is important to ensure they open properly and get a good camper shell seal against the camper shell gasket when closed.
- Comes with four 10mm ball mounts for alternate 'other than truck camper shell' applications, such as in camper / canopy windoors, RV doors and awnings, boat hatch spring lifts, gas struts for cabinets, storage bed lifts, toolbox struts, etc. These gas shock lift supports CANNOT be compressed by hand. These gas props MUST be installed in the EXTENDED / OPEN position. It is nearly impossible to install them in the CLOSED position. Please refer to the install video for guidance on how to install.
- Compatible w/ Suspa #C16-06389 & c16-21682, Stabilus #025647. These camper shell shocks are compatible with many truck canopy types, including LEER truck cap parts, ARE truck topper parts, Glasstite parts, Century parts, Snugtop replacement parts Astro tops, ATC campers, and many other fiberglass brands that utilize gas shocks / gas springs / gas lift cylinders. Compatible with many gas lift brands, including stabilus, lift o mat, and Suspa. These are OEM quality and perfect fit for your topper!
- See more on Amazon...
Brand: Truck Upfitters | Manufacturer: Truck Upfitters
Dimensions: 0.50 x 13.89 x 0.50 inches
See On Amazon #17
LEER ROLLITUP | Fits 2007-2013 GM Chevy Silverado/GMC Sierra with 6'5" Bed | Soft Roll Up Truck Bed Tonneau Cover | 4R159 | Low-Profile, Sturdy, Easy 15-Minute Install
Asin: B0C91RP838 | Model: Rolling | PartNumber: Rolling | Ean: 0810059881488 | UPC: 810059881488
101 Percent Bed Access – When You’Re Ready To Access Your Bed, The Rollitup Allows You The Ability To Have Full Access To Your Bed, Without The Removal Of Your Tonneau. Each Rollitup Cover Uses A Velcro Brand Hook & Loop Strip On The Sides And A One-Step Cable Release To Unlock The Cover..
Fitment – Please Double Check That Your Truck’S Year, Make, Model, And Bed Length Fit This Application Before Purchasing..
No-Drill Installation – With An Easy And Fast Installation Process, Our Rollitup Comes With The Tools And Instructions To Install Your Tonneau In Minutes..
Built To Last – Our Cover Is Made Out Of Heavy-Duty 24-Ounce Tear-Resistant, Marine-Grade Vinyl, With 3 Built-In Crossbars That Offer Support When The Cover Is Lying Flat. Our Side Rails And Clamps Are Made Of 6063 Aluminum, Which Is Corrosion-Resistant..
Features
- FITS PERFECT/EASY TO LATCH ROLLITUP tonneau covers fit perfectly on your bed rails and each part number is specifically designed for your model truck! Our ROLLITUP has an easy to latch mechanism that closes and locks at the end of the tailgate. Each cover has an adjustable tension system, keeping your ROLLITUP tight and wrinkle-free in any weather condition.
- BUILT TO LAST Our cover is made out of heavy-duty 24-ounce tear-resistant, marine-grade vinyl, with 3 built-in crossbars that offer support when the cover is lying flat. Our side rails and clamps are made of 6063 aluminum, which is corrosion-resistant.
- 101 PERCENT BED ACCESS When you re ready to access your bed, the ROLLITUP allows you the ability to have full access to your bed, without the removal of your tonneau. Each ROLLITUP cover uses a Velcro Brand hook & loop strip on the sides and a one-step cable release to unlock the cover.
- NO-DRILL INSTALLATION With an easy and fast installation process, our ROLLITUP comes with the tools and instructions to install your tonneau in minutes.
- FITMENT Please double check that your truck s year, make, model, and bed length fit this application before purchasing.
- See more on Amazon...
Brand: LEER | Manufacturer: LEER
Warranty: Limited Lifetime Warranty
See On Amazon #18
LEER HF650M | Fits 2015-2022 Ford F-150 with 5.6 FT Bed | Hard, Quad-Folding, Low Profile Tonneau Cover | SKU 650112
Asin: B082FMG6QK | Model: 650112 | PartNumber: 650112 | Ean: 0812227028725 | UPC: 812227028725
Four Lightweight Panels - The Hf650m Offers Ultimate Flexibility With Four Lightweight, Durable, Dent-Resistant Panels Made Of Fiberglass Reinforced Plastic Polymer. When Opened, The Quad-Fold Design Keeps The Third Brake Light And Window Visible And Protects The Back Of Your Cab And Window By Locking Into Position Away From The Cab. 450 Lbs. Evenly Distrusted Load Rating..
Fits The F150 Lightning - This Tonneau Cover Fits The New F150 Lightning Electric Truck..
No-Drill Installation – With An Easy And Fast Installation Process, The Hf650m Comes With The Tools And Instructions To Install Your Tonneau. This Allows You The Ability To Easily Take Your Cover Off Or Put It Back On..
Sleek Look – The Patented Hf650m Hard Folding Cover Has A Sleek, 12Mm Low-Profile Design With Thinner Rails, Allowing For A True Flush Mount And More Cargo Space Inside The Bed..
Features
- FITS PERFECT/EASY TO LATCH LEER s industry exclusive CYNC latching system allows easily opening the cover with two fingers from either side of the truck bed. Latches with open or closed tailgate.
- SLEEK LOOK The patented HF650M Hard Folding Cover has a sleek, 12MM low-profile design with thinner rails, allowing for a true flush mount and more cargo space inside the bed.
- FOUR LIGHTWEIGHT PANELS - The HF650M offers ultimate flexibility with four lightweight, durable, dent-resistant panels made of fiberglass reinforced plastic polymer. When opened, the quad-fold design keeps the third brake light and window visible and protects the back of your cab and window by locking into position away from the cab. 450 lbs. evenly distrusted load rating.
- NO-DRILL INSTALLATION With an easy and fast installation process, the HF650M comes with the tools and instructions to install your tonneau. This allows you the ability to easily take your cover off or put it back on.
- FITS THE F150 LIGHTNING - This tonneau cover fits the new F150 Lightning Electric Truck.
- See more on Amazon...
Brand: LEER | Manufacturer: Leer
Dimensions: 5.70 x 68.00 x 25.00 inches | Weight: 72.00 Pounds
Warranty: Manufactuer Warranty
See On Amazon #19
2 Truck Upfitters 16" Gas Props (15.7" Extended, 9.4" Compressed, 28 lbs of Press ea) Compatible with are, ATC, Snugtop, Leer Camper Shell/Truck Cap Rear Door. Measurement REQ'D! Incl 4 Ball mounts!
Asin: B07L43M829 | Model: 16”, 28 lbs | PartNumber: 16”, 28 lbs
These Gas Lift Cylinders Do Not Fit All Truck Cap/Camper Shell Brands/Models. Measure Your Strut From Center Of Socket To Center Of Socket When Fully Opened & Fully Closed To Get Accurate Measurement. See Pictures To Determine How To Measure. Do Not Measure From End To End. Measurement Must Be From The Center Of Plastic Ball Mount On Each End Of The Gas Spring Lift. Measurement Is Important To Ensure They Open Properly And Get A Good Camper Shell Seal Against The Camper Shell Gasket When Closed..
Equivalent To Suspa # C16-09841 These Camper Shell Shocks Are Compatible With Many Truck Canopy Types, Including Leer Truck Cap Parts, Are Truck Topper Parts, Glasstite Parts, Century Parts, Snugtop Replacement Parts Astro Tops, Atc Campers, And Many Other Fiberglass Brands That Utilize Gas Shocks / Gas Springs / Gas Lift Cylinders. Compatible With Many Gas Lift Brands, Including Stabilus, Lift O Mat, And Suspa. These Are Oem Quality And Perfect Fit For Your Topper!.
Comes With Four 10Mm Ball Mounts For Alternate 'Other Than Truck Camper Shell' Applications, Such As In Camper / Canopy Windoors, Rv Doors And Awnings, Boat Hatch Spring Lifts, Gas Struts For Cabinets, Storage Bed Lifts, Toolbox Struts, Etc. These Gas Shock Lift Supports Cannot Be Compressed By Hand. These Gas Props Must Be Installed In The Extended / Open Position. It Is Nearly Impossible To Install Them In The Closed Position. Please Refer To The Install Video For Guidance On How To Install..
Truck Upfitters Pair Of 28 Pound (Each) Gas Struts. 15.7" Extended Length And 9.4" Compressed Length. This Size Of Door Shock Absorber Is For Short & Light Weight Rear Or Side Camper Shell Doors. Each Canopy Shock Has 28 Lbs Of Pressure, For A Total Of 56 Lbs Of Pressure. Please Note That This Does Not Mean That It Can Lift Something That Is 56 Lbs. The Typical Hinged-Style Door Weight For This Prop Is Approximately 30-40 Lbs, Including The Weight Of The Camper Shell Locks And Keys..
Features
- CHECK LENGTHS AND PRESSURE BEFORE ORDERING. THESE DO NOT FIT ALL CANOPY and COVERS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE! Use a measuring tape to measure the door gas strut that you are replacing. Measure from the CENTER of the gas prop head (little plastic end), to the other side. DO NOT measure from the end of the gas prop, your measurement will be too long. Note that most applications allow for 1-5% size variation.
- Truck Upfitters Pair of 28 pound (each) gas struts. 15.7 extended length and 9.4 compressed length. This size of door shock absorber is for short & light weight rear or side camper shell doors. Each canopy shock has 28 lbs of pressure, for a total of 56 lbs of pressure. Please note that this does not mean that it can lift something that is 56 lbs. the typical hinged-style door weight for this prop is approximately 30-40 lbs, including the weight of the camper shell locks and keys.
- These gas lift cylinders do not fit all truck cap/camper shell brands/models. Measure your strut from center of socket to center of socket when fully opened & fully closed to get accurate measurement. See pictures to determine how to measure. Do NOT measure from end to end. Measurement must be from the center of plastic ball mount on each end of the gas spring lift. Measurement is important to ensure they open properly and get a good camper shell seal against the camper shell gasket when closed.
- Comes with four 10mm ball mounts for alternate 'other than truck camper shell' applications, such as in camper / canopy windoors, RV doors and awnings, boat hatch spring lifts, gas struts for cabinets, storage bed lifts, toolbox struts, etc. These gas shock lift supports CANNOT be compressed by hand. These gas props MUST be installed in the EXTENDED / OPEN position. It is nearly impossible to install them in the CLOSED position. Please refer to the install video for guidance on how to install.
- Equivalent to Suspa # c16-09841 These camper shell shocks are compatible with many truck canopy types, including LEER truck cap parts, ARE truck topper parts, Glasstite parts, Century parts, Snugtop replacement parts Astro tops, ATC campers, and many other fiberglass brands that utilize gas shocks / gas springs / gas lift cylinders. Compatible with many gas lift brands, including stabilus, lift o mat, and Suspa. These are OEM quality and perfect fit for your topper!
- See more on Amazon...
Brand: Truck Upfitters | Manufacturer: Truck Upfitters
Dimensions: 0.50 x 16.00 x 0.50 inches
See On Amazon #20
Bzumperyz Replacement Part for LEER Twist Handle Kit 113436-100XQ, 700, 100XL & Latches 83514/83515
Asin: B0CPF5VMBZ | Model: A-113436-100XQ | PartNumber: A-113436-100XQ
✴️【Quality】Made Of High-Quality Material, This Kit Ensures Its Reliability With No Compromise To Its Performance..
✴️【Friendly Service】 A Full Refund Is Available Within 30 Days If You Are Not Satisfied; We Also Offer A 12-Month Warranty From The Date Of Purchase To Make Sure That You Have Good Experience..
✴️【Package】1* Twist Handle; 1* D/S And P/S Striker Latches 83514 / 83515 Combo; 2*Key; 1*Cable.
✴️【Fitment】Replace For Leer 100Xl, Leer 100Xq And Leer 700 For Your Topper Or Tonneau..
Features
- Application Lock mechanism broken? Lock is jammed? Find it difficult to lock/unlock Keys get missing? ----such locking problems of your truck caps could be easily solved. Change it and better protect your property with this easy lock.
- Fitment Replace for Leer 100XL, Leer 100XQ and Leer 700 for your topper or tonneau.
- Quality Made of high-quality material, this kit ensures its reliability with no compromise to its performance.
- Package 1* twist handle; 1* D/S and P/S striker latches 83514 / 83515 combo; 2*key; 1*cable
- Friendly Service A full refund is available within 30 days if you are not satisfied; we also offer a 12-month warranty from the date of purchase to make sure that you have good experience.
- See more on Amazon...
Brand: Bzumperyz | Manufacturer: Bzumperyz
Dimensions: 1.00 x 1.50 x 1.00 inches | Weight: 1.50 Pounds
See On Amazon
Looking For Something Else?
Search