Manual Vent Gas Cap,Outboard 12L/24L Universal Fuel Gas Tank Cap Cover Replacement for Yamaha Boat Engine
Asin: B084RK3VCG | Model: Qii lumfs8dheagv | PartNumber: Qii lumfs8dheagv | Ean: 0738604223876 | UPC: 738604223876
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Great Replacement:Outboard Fuel Tank ,Direct And Great Replacement For The Old Or Damaged One, Perfectly Match.Made In Strict Accordance With Standard Requirements..
Standard Specification:Gas For Plastic Boat Gas Tank Conform To Strict Quality Control Standards, Dependable To Use.Boat Motor Gas Manufactured According To The Original Specifications.Built To Meet Standard Specification, Strictly Follow Factory Quality Control..
Excellent Performance:Fuel Tank Gas ,Fantastic Sealing Effect, Avoid Fuel Leakage And Prevent Dirt From Entering Into The Fuel Tank..
Feature:Fuel Gas Tank ,Professional Workmanship, Superior Performance, High Reliability.Developed With Super Quality Material For Long-Lasting Durability..
Features
- Brilliant Compatibility:Fuel Tank Cover Easy to install, for 12L/24L oil tank, fit for Boat Engine.Manufactured according to the original specifications, which are very compatible with your model.
- Feature:Fuel Gas Tank ,Professional workmanship, superior performance, high reliability.Developed with super quality material for long-lasting durability.
- Great Replacement:Outboard Fuel Tank ,Direct and great replacement for the old or damaged one, perfectly match.Made in strict accordance with standard requirements.
- Excellent Performance:Fuel Tank Gas ,Fantastic sealing effect, avoid fuel leakage and prevent dirt from entering into the fuel tank.
- Standard Specification:Gas for plastic boat gas tank Conform to strict quality control standards, dependable to use.Boat motor gas Manufactured according to the original specifications.Built to meet standard specification, strictly follow factory quality control.
- See more on Amazon...
Brand: Qiilu
Dimensions: 3.94 x 3.94 x 3.94 inches
See On Amazon Similar To Manual Vent Gas CapOutboard 12L
#1
10 Pack Universal Large Yellow Fuel Gas Can Vent Caps Chilton Briggs Rotopax Gott
Asin: B00MNC6L24 | Model: GV-Big-YELLOW-10 | PartNumber: GV-Big-YELLOW-10 | Ean: 5133330326986, 7225830185908, 5133330271231, 7131405157570
Vent Caps Are Installed Onto Any Non-Vented Plastic Fuel Cans ~ Allows A Leak Free, Faster Flow.
Fits Plastic And Metal Fuel Jugs Such As Blitz, Wedco, Scepter, Essence, Midwest, Eagle, Chilton, Briggs & Stratton, Rotopax, Gott, Rubbermaid, Sears Craftsman, Anchor And Koplin..
Fits Both Plastic And Metal Fuel Jugs ~ You Will Have To Drill A 31/64" (One Size Below 1/2") Hole Into The Can, Then Push The Vent Into The Hole..
New And Improved With Retaining Lip To Hold The Vent In Place After Installation ~ Made In Usa!.
Features
- New JSP Brand Aftermarket Universal Fuel Can Large Yellow Vent Cap ~ 10 Pack
- NEW and IMPROVED with retaining lip to hold the vent in place after installation ~ Made in USA!
- Vent Caps are installed onto any non-vented plastic fuel cans ~ Allows a leak free, faster flow
- Fits both Plastic and Metal Fuel Jugs ~ You will have to drill a 31/64 (one size below 1/2) hole into the can, then push the vent into the hole.
- Fits Plastic and Metal Fuel Jugs such as Blitz, Wedco, Scepter, Essence, Midwest, Eagle, Chilton, Briggs & Stratton, Rotopax, Gott, Rubbermaid, Sears Craftsman, Anchor and Koplin.
- See more on Amazon...
Brand: JSP Manufacturing | Manufacturer: JSP Manufacturing
Dimensions: 4.00 x 4.00 x 4.00 inches
See On Amazon #2
JSP Manufacturing Pick a Pack Yellow Fuel Gas Can Vent Cap Chilton Briggs Rotopax Gott Anchor Multipack Pricing (10)
Asin: B00U7YLKNU | Model: GV-Big-YELLOW-10-FBA | PartNumber: GV-Big-YELLOW-10-FBA | Ean: 5133330326986
Vent Caps Are Installed Onto Any Non-Vented Plastic Fuel Cans ~ Allows A Leak Free, Faster Flow.
Fits Plastic And Metal Fuel Jugs Such As Blitz, Wedco, Scepter, Essence, Midwest, Eagle, Chilton, Briggs & Stratton, Rotopax, Gott, Rubbermaid, Sears Craftsman, Anchor And Koplin..
Fits Both Plastic And Metal Fuel Jugs ~ You Will Have To Drill A 31/64" (One Size Below 1/2") Hole Into The Can, Then Push The Vent Into The Hole..
New And Improved With Retaining Lip To Hold The Vent In Place After Installation ~ Made In Usa!.
Features
- New JSP Brand Aftermarket Universal Fuel Can Large Yellow Vent Cap ~ 10 Pack
- NEW and IMPROVED with retaining lip to hold the vent in place after installation ~ Made in USA!
- Vent Caps are installed onto any non-vented plastic fuel cans ~ Allows a leak free, faster flow
- Fits both Plastic and Metal Fuel Jugs ~ You will have to drill a 31/64 (one size below 1/2) hole into the can, then push the vent into the hole.
- Fits Plastic and Metal Fuel Jugs such as Blitz, Wedco, Scepter, Essence, Midwest, Eagle, Chilton, Briggs & Stratton, Rotopax, Gott, Rubbermaid, Sears Craftsman, Anchor and Koplin.
- See more on Amazon...
Brand: JSP Manufacturing | Manufacturer: JSP Manufacturing
Dimensions: 4.00 x 4.00 x 4.00 inches
See On Amazon #3
Magicfour Fuel Gas Can Vent Caps, 6 Pack Fuel Gas Tank Vent Caps Gas Can Replacement Vent Plug Gas Jug Vent Caps for Gas Fuel Water Can Jug to Allow Faster Flowing
Asin: B08747LWC4 | Ean: 0793740144720 | UPC: 793740144720
Vent Cap: Fuel Can Air Vent Caps Can Be Used For All Kinds Of 3 Or 5 Gallon Gas Can Or Other Plastic Gas Or Water Can, Provide A Vent And Make The Fuel Or Water Pour Out Quickly And Smoothly..
Packing List: The Package Will Come With 6 Pieces Gas Can Vent Caps, 1 Piece Drill, 1 Piece Wire,1 Piece Wrench And 6 Pieces Stickers..
Easy Operation: Simple To Install The Valve Stem And Rubber Sealing Ring Onto The Can Via A Wire After Drilling A Hole Through The Can, Then Screw On The Dust Cap Finished.(It's Better To Drill A Hole On High And Back Of The Can, Avoiding The Handle Because It's Thicker.).
Leak Proof Design: Gas Can Replacement Vent Cap Is Designed With Screw Caps And Double Rubber Sealing Rings That Can Ensure Leak Proof..
Features
- Premium Material: Universal gas can vent cap is made of premium stainless steel and premium rubber, rustproof and durable.
- Leak Proof Design: Gas can replacement vent cap is designed with screw caps and double rubber sealing rings that can ensure leak proof.
- Vent Cap: Fuel can air vent caps can be used for all kinds of 3 or 5 gallon gas can or other plastic gas or water can, provide a vent and make the fuel or water pour out quickly and smoothly.
- Easy Operation: Simple to install the valve stem and rubber sealing ring onto the can via a wire after drilling a hole through the can, then screw on the dust cap finished.(It's better to drill a hole on high and back of the can, avoiding the handle because it's thicker.)
- Packing List: The package will come with 6 pieces gas can vent caps, 1 piece drill, 1 piece wire,1 piece wrench and 6 pieces stickers.
- See more on Amazon...
Brand: Magicfour | Manufacturer: Magicfour
Dimensions: 0.50 x 4.72 x 2.36 inches
See On Amazon #4
JSP Manufacturing 5 Yellow Fuel Gas Can Jug Vent Cap
Asin: B00SEK6XN6 | Model: GV-Big-YELLOW-5-FBA | PartNumber: GV-Big-YELLOW-5-FBA | Ean: 5509005552736
Vent Caps Are Installed Onto Any Non-Vented Plastic Fuel Cans ~ Allows A Leak Free, Faster Flow.
Fits Plastic And Metal Fuel Jugs Such As Blitz, Wedco, Scepter, Essence, Midwest, Eagle, Chilton, Briggs & Stratton, Rotopax, Gott, Rubbermaid, Sears Craftsman, Anchor And Koplin..
Fits Both Plastic And Metal Fuel Jugs ~ You Will Have To Drill A 31/64" (One Size Below 1/2") Hole Into The Can, Then Push The Vent Into The Hole..
New And Improved With Retaining Lip To Hold The Vent In Place After Installation ~ Made In Usa!.
Features
- New JSP Brand Aftermarket Universal Fuel Can Large Yellow Vent Cap ~ 5 Pack
- NEW and IMPROVED with retaining lip to hold the vent in place after installation ~ Made in USA!
- Vent Caps are installed onto any non-vented plastic fuel cans ~ Allows a leak free, faster flow
- Fits both Plastic and Metal Fuel Jugs ~ You will have to drill a 31/64 (one size below 1/2) hole into the can, then push the vent into the hole.
- Fits Plastic and Metal Fuel Jugs such as Blitz, Wedco, Scepter, Essence, Midwest, Eagle, Chilton, Briggs & Stratton, Rotopax, Gott, Rubbermaid, Sears Craftsman, Anchor and Koplin.
- See more on Amazon...
Brand: JSP Manufacturing | Manufacturer: JSP Manufacturing
Dimensions: 2.00 x 6.00 x 4.00 Inches
See On Amazon #5
6PCS Gas Can Vent Caps Kits Fuel Gas Can Vent Replacement Cap Compatible with Most Gasoline/Fuel Jug Gas Tank Vent Caps
Asin: B0CCS5XF9T | Ean: 0766157391933 | UPC: 766157391933
【Easy To Install】 You Need To Drill A 31/64" Or 15/32" Hole(Which Is Slightly Smaller Than 1/2") Into The Can, Or Used A Step Drill Bit With A 18 Normal Drill Bit As A Pilot Drill And Drilled The Step Bit To One Half Inch Hole. Put Soapy Water On The Vent And Tapped The Gas Can Cap Replacement Into The Hole With A Small Mallet. (Be Careful Not To Get Debris Inside Your Gas Can).
【Warranty Service】Use The Vent Cap Insert To Retrofit These Inconvenient Gas Cans In Order For Them To Function Properly And No More Spill Gas On Your Mower. 12 Months Warranty Provided..
【Easy To Operate】If The Hole Of The Gas Tank Vent Cap Is Drilled A Little Bigger, It Is Recommended To Use A Touch Of Sealant/Silicon Or Fuel Grade Epoxy To The Outer Rim Of The Vent Cap Insert, It Needs To Be Securely Fastened To The Gas Tank To Provide A Good Leak-Proof Seal..
【High Quality】Jdiag Gas Tank Vent Caps Are Made Of "High Density Polyethylene"(Hdpe) Plastic, Which Is Fastened And Durable. Do Not Need A Pair Of Pliers To Open When The Gas Can Is Vacuumed And Do Not Pop When The Can Is Pressurized Either..
Features
- Widely Applicable JDIAG gas can vent caps kit fit any 3 gal/5 gal non-vented plastic fuel/gas cans, provides vents and allows for quick and smooth flow of gas.
- High Quality JDIAG gas tank vent caps are made of High Density Polyethylene(HDPE) plastic, which is fastened and durable. Do not need a pair of pliers to open when the gas can is vacuumed and do not pop when the can is pressurized either.
- Easy to Install You need to drill a 31/64 or 15/32 hole(which is slightly smaller than 1/2) into the can, or used a step drill bit with a 18 normal drill bit as a pilot drill and drilled the step bit to one half inch hole. Put soapy water on the vent and tapped the gas can cap replacement into the hole with a small mallet. (Be careful not to get debris inside your gas can)
- Easy to Operate If the hole of the gas tank vent cap is drilled a little bigger, it is recommended to use a touch of sealant/silicon or fuel grade epoxy to the outer rim of the vent cap insert, it needs to be securely fastened to the gas tank to provide a good leak-proof seal.
- Warranty Service Use the vent cap insert to retrofit these inconvenient gas cans in order for them to function properly and no more spill gas on your mower. 12 months warranty provided.
- See more on Amazon...
Brand: JDIAG
See On Amazon #6
Gas Can Vent Caps | 6 Pack Fuel Gas Tank Vent Caps | Metal Gas Can Replacement Vent Plug | Leak-Proof Gas Jug Vent Caps| Gas Tank Exhaust Caps for Faster Flow
Asin: B09NVHYJRK | Ean: 0764735789592 | UPC: 764735789592
💧 【Durable Material】: The Replacement Vent Caps Are Made Of High Quality Stainless Steel. The Other Accessories Of The Fuel Can Air Vent Caps Is Designed With Premium Brass Components And Reliable Rubber Seals Which Can Combine The Firm Construction And Leak-Resistant, Rustproof And Wear Resistant..
💧【What's In The Box】: You Will Receive 6 Pieces Air Vent Replacement Cap Plug With 1 Piece Drill, 1 Piece Wire And 2 Piece Wrench.The Gas Jug Vent Caps Are Suitable For Any Fuel, Diesel, Kerosene, Gas, Water Can Or Any Can You Want To Make It Flow More Faster And Smoother..
💧 【Easy To Assemble】：Simply Drill An Hole In The Jerry Can Or Container, And Use The Wire With The Attached Valve Stem And Rubber Sealing Ring, Then Secure The Nozzle By Using The Provided Cap. It Can Be Easily Complete In 12 Minutes Even Without Any Manual Skills..
💧 【Double Leak-Proof Design】: The Gas Can Replacement Vent Caps Come With The Longer Stainless Steel Gas Can Caps And Quality Rubber Seals, Double Leak Resistant Protection To Prevent The Liquid Of The Can From Splashing And Spilling..
Features
- Faster Flowing The upgraded gas tank vent caps can turn the gas container into vented gas can to make it have an equal air pressure for constant flow. Our gas tank exhaust caps kit can make sure your fuel gas can more smoother and faster flowing to save your time.
- Double Leak-Proof Design : The gas can replacement vent caps come with the longer stainless steel gas can caps and quality rubber seals, double leak resistant protection to prevent the liquid of the can from splashing and spilling.
- Durable Material : The replacement vent caps are made of high quality stainless steel. The other accessories of the fuel can air vent caps is designed with premium brass components and reliable rubber seals which can combine the firm construction and leak-resistant, rustproof and wear resistant.
- Easy To Assemble Simply drill an hole in the jerry can or container, and use the wire with the attached valve stem and rubber sealing ring, then secure the nozzle by using the provided cap. It can be easily complete in 12 minutes even without any manual skills.
- What's In the Box : You will receive 6 pieces air vent replacement cap plug with 1 piece drill, 1 piece wire and 2 piece wrench.The gas jug vent caps are suitable for any fuel, diesel, kerosene, gas, water can or any can you want to make it flow more faster and smoother.
- See more on Amazon...
Brand: TaoTazon | Manufacturer: TaoTazon
See On Amazon #7
Attwood 911526-1 Replacement Cover for P-Trap Fuel Tank Vent Black
Asin: B001HBX2RO | Model: 911526-1 | PartNumber: 911526-1 | Ean: 0022697915269 | UPC: 022697915269
P-Trap Vents Eliminate The Need For An Anti-Siphon Loop In The Vent Hose..
Vents Air From Your Boat's Fuel Tank As You Fill The Fuel Tank..
Splash-Resistant, Corrosion Resistant.
These Vents Help Prevent Water From Entering The Fuel Tank, Yet Allow Air To Vent Freely, During Normal Sea Conditions And Washdowns..
Features
- Replacement cover for standard mount P-trap fuel tank vent.
- These vents help prevent water from entering the fuel tank, yet allow air to vent freely, during normal sea conditions and washdowns.
- P-trap vents eliminate the need for an anti-siphon loop in the vent hose.
- Splash-resistant, corrosion resistant
- Vents air from your boat's fuel tank as you fill the fuel tank.
- See more on Amazon...
First Available: 10/24/2018
Brand: Attwood | Manufacturer: Attwood
Dimensions: 1.25 x 3.00 x 2.25 Inches | Weight: 0.02 pounds
See On Amazon #8
2PCS Gas Fuel Cap Air Vent Hose Universal CNC Tank Valve Vent Tube with Chekc Ball Aluminum Breather for 50cc 110cc 70cc 125cc ATV Motorcycle Dirt Pit Quad Bike Motocross Black
Asin: B09TY41Y36 | Model: 1 | PartNumber: 1 | Ean: 0797444421385 | UPC: 797444421385
High Quality:This Atv Gas Cap Vent Tube Is Made Of 6061 T-6 Aluminum,Perfect Anodize Surface Treatment,While The Breather Tube Is Made From Plastic.Easy To Install And Convenient To Carry.
What You Get:2 X Fuel Tank Vent Tube,Our 12 Month Extended Warranty & 30 Days Money Back And 24/7 Friendly Customer Service.Please Feel Free To Contact Us For Help.
Protection:Fuel Tank Cap Vent Can Protect Your Gas Tank From Filling With Dirt,Dust And Debris In Everyday Use Or More Extreme Motocross Environments,Keeps Air In And Gas From Coming Out.
Fuction:This Atv Breather Tube Can Replaces Awkward Fuel Tank Breather Hoses,One Way Vent Allows The Tank To Breath While Preventing Fuel From Splashing Out And Making A Mess.There Is A Check Ball Inside The Hose.
Features
- Fitment:Our fuel cap breather is fit for most of dirt pit monkey bike ATV Quad 50cc 110cc 70cc 125cc Motorcycle XR CRF RM KX SSR EXC XC SX SXF XCF XCW Dirt Pit Quad Bike Atv
- Fuction:This atv breather tube can replaces awkward fuel tank breather hoses,one way vent allows the tank to breath while preventing fuel from splashing out and making a mess.There is a check ball inside the hose
- High Quality:This atv gas cap vent tube is made of 6061 T-6 aluminum,perfect anodize surface treatment,while the breather tube is made from plastic.Easy to install and convenient to carry
- PROTECTION:Fuel tank cap vent can protect your gas tank from filling with dirt,dust and debris in everyday use or more extreme motocross environments,keeps air in and gas from coming out
- WHAT YOU GET:2 x fuel tank vent tube,our 12 month extended warranty & 30 days money back and 24/7 friendly customer service.Please feel free to contact us for help
- See more on Amazon...
Brand: APPYU | Manufacturer: Rudear store
See On Amazon #9
Moeller Tempo Manual Vent Gas Cap, Black (621501-10)
Asin: B00BN67792 | Model: 621501-10 | PartNumber: 621501-10 | Ean: 0739729011713 | UPC: 739729011713
Simply Twist The Top And Allow Your Tank To Vent.
Country Of Origin: United States.
This Cap Is Manually Vented.
Features
- This Cap Will Fit The Old Style Portable Moeller And Tempo Fuel Tanks
- This Cap Is Manually Vented
- Simply Twist The Top And Allow Your Tank To Vent
- Country Of Origin: United States
- See more on Amazon...
Brand: Moeller | Manufacturer: Moeller Marine Products
Dimensions: 7.01 x 4.25 x 3.50 Inches | Weight: 0.10 pounds
Warranty: Manufacturer
See On Amazon #10
20 Yellow Fuel Gas Can Jug Vent Cap Compatible Chilton Briggs Rotopax Gott Anchor
Asin: B00U7XWRS8 | Model: GV-Big-YELLOW-20-FBA | PartNumber: GV-Big-YELLOW-20-FBA
Vent Caps Are Installed Onto Any Non-Vented Plastic Fuel Cans ~ Allows A Leak Free, Faster Flow.
Fits Plastic And Metal Fuel Jugs Such As Blitz, Wedco, Scepter, Essence, Midwest, Eagle, Chilton, Briggs & Stratton, Rotopax, Gott, Rubbermaid, Sears Craftsman, Anchor And Koplin..
Fits Both Plastic And Metal Fuel Jugs ~ You Will Have To Drill A 31/64" (One Size Below 1/2") Hole Into The Can, Then Push The Vent Into The Hole..
You Will Have To Drill A 31/64" (One Size Below 1/2") Hole Into The Can, Then Push The Vent Into The Hole. New And Improved With Retaining Lip To Hold The Vent In Place After Installation ~ Made In Usa!.
Features
- New JSP Brand Aftermarket Universal Fuel Can Large Yellow Vent Cap ~ 20 Pack
- You will have to drill a 31/64 (one size below 1/2) hole into the can, then push the vent into the hole. NEW and IMPROVED with retaining lip to hold the vent in place after installation ~ Made in USA!
- Vent Caps are installed onto any non-vented plastic fuel cans ~ Allows a leak free, faster flow
- Fits both Plastic and Metal Fuel Jugs ~ You will have to drill a 31/64 (one size below 1/2) hole into the can, then push the vent into the hole.
- Fits Plastic and Metal Fuel Jugs such as Blitz, Wedco, Scepter, Essence, Midwest, Eagle, Chilton, Briggs & Stratton, Rotopax, Gott, Rubbermaid, Sears Craftsman, Anchor and Koplin.
- See more on Amazon...
Brand: JSP Manufacturing | Manufacturer: JSP Manufacturing
Dimensions: 6.00 x 6.00 x 6.00 Inches
See On Amazon
Looking For Something Else?
Search