DIYmalls BN-220 GPS Module TTL Dual GPS Glonass w/Flash NMEA-0183 9600bps 1Hz for Arduino RC FPV Drone Flight Control
Asin: B086ZK9BT4 | Ean: 0747356637565 | UPC: 747356637565
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Bn220 Gps Has Flash To Save Configuration, So You Do Not Need To Reset Data Next Time When You Use It. But Bn220 Gps Doesn't Have Compass. If You Need Gps With Flash And Compass, Please Check Bn-880 Gps Via "Visit The Diymalls Store".
If You Have Any Problem, Please Do As Follow: Click "Diymalls"(You Can Find "Sold By Diymalls" Under Buy Now Button), In The New Page, Click "Ask A Question"..
Data Level : Ttl Or Rs-232,Default Ttl Level. To Make It Be Rs232 Output, You Need To Use One Ttl To Rs232 Converter Cable.
When You Power Up Bn 220 Gps Module The First Time In A New Location, It Always Takes Longer To Find Satillites. This Is Referred To As “Cold Start”. Once You’Ve Done It The First Time, Later When You Restart Bn220 Gps Module, It Will Get A Lock Much Faster..
Features
- When you use it for pi, there is no driver installation needed but you need to install software
- When you power up bn 220 GPS module the first time in a new location, it always takes longer to find satillites. This is referred to as cold start . Once you ve done it the first time, later when you restart bn220 GPS module, it will get a lock much faster.
- bn220 gps has flash to save configuration, so you do not need to reset data next time when you use it. But bn220 gps doesn't have compass. If you need gps with flash and compass, please check bn-880 gps via Visit the DIYmalls Store
- Data Level : TTL or RS-232,Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable
- If you have any problem, please do as follow: click DIYmalls(you can find Sold by DIYmalls under Buy Now button), in the new page, click Ask a question.
- See more on Amazon...
Brand: DIYmalls | Manufacturer: DIYmalls
Dimensions: 0.59 x 7.48 x 3.15 Inches | Weight: 0.02 Pounds
See On Amazon Similar To DIYmalls BN220 GPS Module TTL
#1
HiLetgo GY-NEO6MV2 NEO-6M GPS Flight Controller Module 3V-5V with Super Strong Ceramic Antenna for Arduino EEPROM APM 2.5
Asin: B01D1D0F5M | Model: 3-01-1087 | PartNumber: 3-01-1087
With Data Backup Battery;With Led Signal Indicator.
Compatible With A Variety Of Flight Control Module.
Default Baud Rate: 9600, Interface: Rs232 Ttl.
Save The Configuration Parameter Data Eeprom Down.
Features
- Module with a ceramic antenna, superior signal
- Save the configuration parameter data EEPROM Down
- With data backup battery;With LED signal indicator
- Default baud rate: 9600, Interface: RS232 TTL
- Compatible with a variety of flight control module
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #2
Geekstory BN-220 Dual GPS Glonass Module Navigation TTL Level 9600bps + GPS Passive Antenna for Arduino Raspberry Pi Pixhawk F3 CC3D Betaflight F4 Flight Control
Asin: B07PRDY6DS | Ean: 0747356629621 | UPC: 747356629621
The Tx Led Flash Means Gps Module Output Normally.The Pps Led Flash Means Gps Module Locate Your Place..
Bn 220 Gps Module Documentation Link Cannot Be Displayed. If You Need Technical Documentation, Please Click “Ask A Question” To Em-Ail Us.
Data Level : Ttl Or Rs-232,Default Ttl Level. To Make It Be Rs232 Output, You Need To Use One Ttl To Rs232 Converter Cable.
When You Use It For Raspberry Pi, There Is No Driver Needed But You Need To Install Software.
Features
- BN-220 gps module has flash to save configuration, so you do not need to reset data next time when you use it. But it has no compass. If you need gps with flash and compass, please buy bn-880 from Geekstory.
- When you use it for Raspberry Pi, there is no driver needed but you need to install software
- The TX LED flash means gps module output normally.The PPS LED flash means gps module locate your place.
- Data Level : TTL or RS-232,Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable
- BN 220 gps module documentation link cannot be displayed. If you need technical documentation, please click Ask a question to em-ail us
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
Dimensions: 0.87 x 0.79 x 0.79 inches | Weight: 0.01 Pounds
See On Amazon #3
Geekstory BN-880 GPS Module U8 with Flash HMC5883L Compass + GPS Active Antenna Support GPS Glonass Beidou Car Navigation for Arduino Raspberry Pi Aircraft Pixhawk APM Flight Controller
Asin: B078Y6323W | Model: FZ2920 | PartNumber: FZ2920 | Ean: 0702795764043 | UPC: 702795764043
Bn 880 Gps Module Has Flash To Save Configuration. So You Do Not Need To Reset Next Time When You Use It.
When You Use It For Raspberry Pi, There Is No Driver Needed But You Need To Install Software.
Dits Data Level Is Ttl Or Rs-232, Default Ttl Level. To Make It Be Rs232 Output, You Need To Use One Ttl To Rs232 Converter Cable.
Bn 880 Gps Module Is Dual Module Compass, With And Electronic Compass Ic Hmc5883l.
Features
- BN-880 is suitable for Open source flight controller, not for flight control with SCM
- Bn 880 gps module is dual module compass, with and electronic compass IC HMC5883L
- Bn 880 gps module has flash to save configuration. So you do not need to reset next time when you use it
- DIts data Level is TTL or RS-232, Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable
- When you use it for Raspberry Pi, there is no driver needed but you need to install software
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
Dimensions: 0.39 x 1.18 x 1.18 inches | Weight: 0.04 pounds
See On Amazon #4
Readytosky M8N GPS Module Built-in Compass with GPS Antenna Mount for Standard Pixhawk 2.4.6 2.4.8 APM 2.6 2.8 Flight Controller
Asin: B01KK9A8QG | Model: XGT60-BLACK | PartNumber: XGT60-BLACK | Ean: 0757450335106 | UPC: 757450335106
★A New Generation M8n Gps,With Low Power Consumption And High Precision..
★★★ Attention: The Gps Can Only Use In Pixhawk And Apm Flight Controller,It Can't Work With Other Flight Controller..
★The Gps Light Only Can Light Up When It Search The Satellite Signal Outdoor; Rom Already Been Fix,It Cannot Be Flash And Change..
★The Ultimate Accuracy Is 0.6 Meters, Actually Almost 0.9 Meters, Greater Than The Previous Generation Neo-7N 1.4-1.6 Meters Accuracy..
Features
- Special designed for Pixhawk 2.4.6 2.4.8 flight controller,ASIN:B07CHQ7SZ4.(Note:If you use it to APM Flight Controller, Please replace the connect by yourself.)
- The ultimate accuracy is 0.6 meters, actually almost 0.9 meters, greater than the previous generation NEO-7N 1.4-1.6 meters accuracy.
- A new generation M8N GPS,with low power consumption and high precision.
- The GPS light only can light up when it search the satellite signal outdoor; ROM already been fix,it cannot be flash and change.
- Attention: the GPS can only use in Pixhawk and APM Flight controller,it can't work with other flight controller.
- See more on Amazon...
Brand: Readytosky | Manufacturer: Readytosky
Dimensions: 0.79 x 8.27 x 5.91 inches | Weight: 0.12 pounds
See On Amazon #5
DIYmalls BN-880 GPS Module HMC5883 Compass Support GPS Glonass Beidou NMEA-0183 9600bps 1Hz for Arduino RC FPV Drone Flight Control
Asin: B086ZKFFY4 | Ean: 0747356637572 | UPC: 747356637572
Bn 880 Gps Module Has Flash To Save Configuration. So You Do Not Need To Reset Data When You Use It Next Time..
If You Have Any Problem, Please Do As Follow: Click "Diymalls"(You Can Find "Sold By Diymalls" Under Buy Now Button), In The New Page, Click "Ask A Question"..
You Can Check Bn180 Bn220 Gps Module Via "Visit The Diymalls Store".
Bn880 Gps Module Is Suitable For Open Source Flight Controller, Not For Flight Control With Scm. When You Use It For R Pi, There Is No Driver Needed But You Need To Install Software.
Features
- bn 880 gps module is dual module compass, with and electronic compass IC HMC5883L
- bn880 gps module is suitable for Open source flight controller, not for flight control with SCM. When you use it for r pi, there is no driver needed but you need to install software
- bn 880 gps module has flash to save configuration. So you do not need to reset data when you use it next time.
- You can check bn180 bn220 gps module via Visit the DIYmalls Store
- If you have any problem, please do as follow: click DIYmalls(you can find Sold by DIYmalls under Buy Now button), in the new page, click Ask a question.
- See more on Amazon...
Brand: DIYmalls | Manufacturer: DIYmalls
Weight: 0.04 pounds
See On Amazon #6
Beitian GPS Module with Antenna UAV Drone M10050 M9140 chip Ultra-Low Power GNSS Receiver for Track GPS BE-180 BK-180 BN-180 BE-220 BK-220 BN-220
Asin: B0C8HW6QQ7
With Flash, The Configuration Can Be Changed, And The Power Will Not Be Lost.
Note: Please Use The Gps Module In An Open Place, The Led Will Flash After The Satellite Signal Is Found. Bad Weather And Indoor Use Will Affect The Accuracy Of Positioning..
Not Positioned, The Light Is Off; After 3D Positioning, The Blue Light Flashes.
The Red Light, The Pps Light, Does Not Light Up If It Is Not Positioned; After 3D Positioning, It Starts To Flash..
Features
- Update rate: 0.25Hz-18Hz,default 10Hz
- The red light, the PPS light, does not light up if it is not positioned; after 3D positioning, it starts to flash.
- With FLASH, the configuration can be changed, and the power will not be lost
- Not positioned, the light is off; after 3D positioning, the blue light flashes
- Note: Please use the GPS module in an open place, the LED will flash after the satellite signal is found. Bad weather and indoor use will affect the accuracy of positioning.
- See more on Amazon...
Brand: Beitian | Manufacturer: Beitian
See On Amazon #7
REC Technology REC DIY GPS Module with Mount for Pixhawk Flight Controller
Asin: B0CXMSFRYH | Ean: 0850017888227 | UPC: 850017888227
Display Size: 0.0 Inches.
Special Feature: Waterproof.
Features
- GPS module with built-in compass Compatible with Pixhawk Flight Controller
- Special feature: Waterproof
- Display size: 0.0 inches
- See more on Amazon...
Brand: REC Technology | Manufacturer: REC Technology
Warranty: 2 year manufacturer
See On Amazon #8
DIYmalls BN-180 GPS Glonass Module TTL NMEA-0183 1Hz 9600bps for Arduino Aircraft RC FPV Drone Flight Control
Asin: B086ZKWYP5 | Ean: 0747356637558 | UPC: 747356637558
Data Level : Ttl Or Rs-232,Default Ttl Level. To Make It Be Rs232 Output, You Need To Use One Ttl To Rs232 Converter Cable.
If You Have Any Problem, Please Do As Follow: Click "Diymalls"(You Can Find "Sold By Diymalls" Under Buy Now Button), In The New Page, Click "Ask A Question"..
Bn 180 Gps Doesn't Have Flash And Compass. If You Need It, Please Check Bn-880 Gps Module Via "Visit The Diymalls Store".
When You Power Up Bn 180 Gps Module The First Time In A New Location, It Always Takes Longer To Find Satillites. This Is Referred To As “Cold Start”. Once You’Ve Done It The First Time, Later When You Restart Bn180 Gps Module, It Will Get A Lock Much Faster..
Features
- BN180 GPS Module can be used with pi, esp32 development board, pc (driver required), drone flight controller etc.
- When you power up bn 180 GPS module the first time in a new location, it always takes longer to find satillites. This is referred to as cold start . Once you ve done it the first time, later when you restart bn180 GPS module, it will get a lock much faster.
- Data Level : TTL or RS-232,Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable
- BN 180 gps doesn't have flash and compass. If you need it, please check bn-880 gps module via Visit the DIYmalls Store
- If you have any problem, please do as follow: click DIYmalls(you can find Sold by DIYmalls under Buy Now button), in the new page, click Ask a question.
- See more on Amazon...
Brand: DIYmalls | Manufacturer: DIYmalls
Dimensions: 0.24 x 0.71 x 0.71 inches | Weight: 0.02 pounds
See On Amazon #9
Geekstory BE-220 GPS Module with Flash Navigation TTL Level 38400bps for Arduino Raspberry Pi Aircraft Pixhawk APM Flight Controller
Asin: B0BV2MV2GN | Model: GR6059 | PartNumber: GR6059
Data Level : Ttl Or Rs-232, Default Ttl Level. To Make It Be Rs232 Output, You Need To Use One Ttl To Rs232 Converter Cable..
What You Will Get: 1*Be-220 Gps Module; 2*Cable.
This Be-220 Gps Module Has 4M Flash To Save Configuration, So You Do Not Need To Reset Data Next Time When You Use It. Baud Rate : 4800Bps To 921600Bps, Default 38400Bps..
The Tx Led Flash Means Gps Module Output Normally. The Pps Led Flash Means Gps Module Locate Your Place..
Features
- This BE-220 GPS Module using the latest 10th generation chip When you use it for Raspberry Pi, there is no driver needed. Here is connection with RPi, red to 3.3v, black to gnd, green to txd, white to rxd.
- The TX LED flash means gps module output normally. The PPS LED flash means gps module locate your place.
- Data Level : TTL or RS-232, Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable.
- This BE-220 GPS Module has 4M Flash to save configuration, so you do not need to reset data next time when you use it. Baud Rate : 4800bps to 921600bps, Default 38400bps.
- What you will get: 1*BE-220 GPS Module; 2*Cable
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
Dimensions: 0.39 x 1.18 x 1.18 Inches
Warranty: Six Months
See On Amazon #10
2PCs Beitian BE220 M8N GPS Module Support GPS GLONASS BeiDou for RC Long Range FPV Racing Drone Airplane
Asin: B081YTBNLY | Model: BN-220 | PartNumber: BN-220 | Ean: 0727161343462 | UPC: 727161343462
When It Is Used On Raspberry Pi, It Is Not Necessary To Install The Driver, But The Software Must Be Installed.
If You Have Any Questions, You Can Contact Us At Any Time.
If The Tx Led Indicator Flashes, It Means That The Be220 M8n Gps Module Is Operating Normally, And The Pps Led Indicator Flashes To Indicate That The Gps Module Has Found Your Location.
Note: It Does Not Have A Compass.
Features
- The BE220 M8N GPS module has a flash memory function to save the configuration, which can help you do not need to reset the data next time you use it.
- Note: it does not have a compass
- When it is used on Raspberry Pi, it is not necessary to install the driver, but the software must be installed
- If the TX LED indicator flashes, it means that the BE220 M8N GPS module is operating normally, and the PPS LED indicator flashes to indicate that the GPS module has found your location
- If you have any questions, you can contact us at any time
- See more on Amazon...
Brand: SoloGood | Manufacturer: Beitian
Dimensions: 0.02 x 0.03 x 0.03 Inches
See On Amazon #11
BN-180 GPS Module UART TTL Dual Glonass GPS Car Navigation with GPS Antenna for Arduino Raspberry Pi Pixhawk Aircraft CC3D F3 Flight Controller Geekstory
Asin: B078Y4XZN9 | Model: FZ2917 | PartNumber: FZ2917 | Ean: 0702795764029 | UPC: 702795764029
Data Level : Ttl Or Rs-232, Default Ttl Level. To Make It Be Rs232 Output, You Need To Use One Ttl To Rs232 Converter Cable..
What You Will Get: 1 X Bn-180 Gps Module.
This Bn-180 Gps Module Does Not Have Flash And Cannot Be Saved. 72 Searching Channel Support Rate : 4800Bps To 921600Bps, Default 9600Bps..
The Tx Led Flash Means Gps Module Output Normally. The Pps Led Flash Means Gps Module Locate Your Place..
Features
- This BN-180 GPS Module can show your speed. When you use it for Raspberry Pi, there is no driver needed. Here is connection with RPi, red to 3.3v, black to gnd, green to txd, white to rxd.
- The TX LED flash means gps module output normally. The PPS LED flash means gps module locate your place.
- Data Level : TTL or RS-232, Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable.
- This BN-180 GPS Module does not have FLASH and cannot be saved. 72 Searching Channel Support Rate : 4800bps to 921600bps, Default 9600bps.
- What you will get: 1 X BN-180 GPS Module
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
Dimensions: 0.35 x 2.72 x 1.81 inches
See On Amazon #12
DIYmalls BE-220 GPS Receiver Module TTL 10th Chip 38400bps for Arduino FPV Aircraft CC3D Flight Control, Replace BN-220 GPS
Asin: B0BTM41627
-Be 220 Module Connection With Flight Control, Usb To Ttl And Develop Board: Gnd To Gnd, Tx To Rx, Rx To Tx, Vcc To 5V..
-The Blue (Tx) Light Flashes When Power On, Indicating There Is Data Output..
-Be-220 Gps Should Be Used Outdoor, And The Antenna Side Facing To The Sky..
-Baud Rate: 4800Bps To 921600Bps, Default 38400Bps( Remember It Is Not 9600Bps)..
Features
- -be220 GPS equiped with 10th chip to replace the bn220 gps, more accurate and receiving signal faster.
- -Baud Rate: 4800bps to 921600bps, default 38400bps( Remember it is NOT 9600bps).
- -be 220 module connection with flight control, usb to ttl and develop board: gnd to gnd, tx to rx, rx to tx, vcc to 5v.
- -be-220 gps should be used outdoor, and the antenna side facing to the sky.
- -The blue (TX) light flashes when power on, indicating there is data output.
- See more on Amazon...
Brand: DIYmalls | Manufacturer: DIYmalls
Warranty: 30 days
See On Amazon #13
DIYmall Micro GPSV5 GPS Module GNSS HMC5983/IST8310 Saw LNA Triple Band Antenna ANT for Arduino Raspberry Pi Pixhawk
Asin: B012RNLG0K | Model: FZ1474 | PartNumber: FZ1474 | Ean: 7739988582095
Triple Band Gps, Glonass And Beidou Antenna.
What You Will Get: 1Pcs Gpsv5 Gps Module ,1Pcs Antenna, 1Pcs Cable.
1 Ttl Uart Port, 1 I2c Port, Build-In Hmc5983/Ist8310 Compass.
On-Board Ultra Low Noise 3.3V Voltage Regulator And Rf Filter For Noise Blocking.
Features
- VCC to 3.3V or 5V, voltage is 3V-5V
- On-board Ultra low noise 3.3V voltage regulator and RF filter for noise blocking
- Triple band GPS, Glonass and BeiDou antenna
- 1 TTL UART port, 1 I2C port, Build-in HMC5983/IST8310 Compass
- What you will get: 1pcs GPSV5 GPS module ,1pcs antenna, 1pcs cable
- See more on Amazon...
Brand: DIYmall | Manufacturer: DIYmall
Dimensions: 0.98 x 1.18 x 0.39 Inches
See On Amazon #14
Geekstory BN-220 Dual GPS Glonass Module Navigation TTL Level 9600bps with GPS Passive Antenna+CP2102 6 in 1 USB-UART Serial Adapter Module with 4P Dupont Cable Jumper Wire,Female to Female for Window
Asin: B0B76DLH3N
Data Level : Ttl Or Rs-232,Default Ttl Level. To Make It Be Rs232 Output, You Need To Use One Ttl To Rs232 Converter Cable.
Cp2102 Serial Adapter Module Compatible With Windows 7/8/10, Linux, Arduino, Nextion Display, Beitian Gps Module, Esp8266 Transceiver Indicator : When The Serial Line To Send Or Receive Data Lines , The Board Will Receive Indicator Lights For Easy Debugging.
6 In 1 Multifunctional Interface Module Supports Usb To Ttl, Usb To 232, Usb To 485, Ttl To 232, Ttl To 485, 232 To 485. Serial Interface Module Cp2102 Usb Ttl 485 232 Mutual Transfer, Before Using The 6 In 1 Multifunctional Interface Module, You Need To Install The Cp2102 Driver.
When You Use It For Raspberry Pi, There Is No Driver Needed But You Need To Install Software. The Tx Led Flash Means Gps Module Output Normally.The Pps Led Flash Means Gps Module Locate Your Place..
Features
- BN-220 gps module has flash to save configuration, so you do not need to reset data next time when you use it. But it has no compass. If you need gps with flash and compass, please buy bn-880 from Geekstory.
- When you use it for Raspberry Pi, there is no driver needed but you need to install software. The TX LED flash means gps module output normally.The PPS LED flash means gps module locate your place.
- Data Level : TTL or RS-232,Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable
- 6 in 1 Multifunctional interface module supports USB to TTL, USB to 232, USB to 485, TTL to 232, TTL to 485, 232 to 485. Serial Interface Module CP2102 USB TTL 485 232 Mutual Transfer, Before using the 6 in 1 Multifunctional interface module, you need to install the CP2102 driver
- CP2102 serial adapter module compatible with Windows 7/8/10, Linux, Arduino, nextion display, beitian gps module, ESP8266 Transceiver indicator : When the serial line to send or receive data lines , the board will receive indicator lights for easy debugging
- See more on Amazon...
Brand: Geekstory
See On Amazon #15
Geekstory BN-180 GPS Module UART TTL Dual Glonass GPS Car Navigation + BN-220 Dual GPS Glonass Module Navigation TTL Level 9600bps + GPS Passive Antenna
Asin: B0B1877R4K
The Tx Led Flash Means Gps Module Output Normally. The Pps Led Flash Means Gps Module Locate Your Place. This Bn-180 Gps Module Does Not Have Flash And Cannot Be Saved. 72 Searching Channel Support Rate : 4800Bps To 921600Bps, Default 9600Bps..
Bn 880 Gps Module Has Flash To Save Configuration. So You Do Not Need To Reset Next Time When You Use It. When You Use It For Raspberry Pi, There Is No Driver Needed But You Need To Install Software..
Bn-880 Is Suitable For Open Source Flight Controller, Not For Flight Control With Scm, Bn 880 Gps Module Is Dual Module Compass, With And Electronic Compass Ic Hmc5883l..
This Bn-180 Gps Module Can Show Your Speed. When You Use It For Raspberry Pi, There Is No Driver Needed. Here Is Connection With Rpi, Red To 3.3V, Black To Gnd, Green To Txd, White To Rxd..
Features
- 1 PCS BN-180 GPS Module + 1 PCS BN-220 Dual GPS module
- This BN-180 GPS Module can show your speed. When you use it for Raspberry Pi, there is no driver needed. Here is connection with RPi, red to 3.3v, black to gnd, green to txd, white to rxd.
- The TX LED flash means gps module output normally. The PPS LED flash means gps module locate your place. This BN-180 GPS Module does not have FLASH and cannot be saved. 72 Searching Channel Support Rate : 4800bps to 921600bps, Default 9600bps.
- BN-880 is suitable for Open source flight controller, not for flight control with SCM, Bn 880 gps module is dual module compass, with and electronic compass IC HMC5883L.
- Bn 880 gps module has flash to save configuration. So you do not need to reset next time when you use it. When you use it for Raspberry Pi, there is no driver needed but you need to install software.
- See more on Amazon...
Brand: Geekstory
See On Amazon #16
DIYmalls BN-220 GPS Module + CP2102 USB to TTL Adapter
Asin: B09BZGQR8Q
Brand: DIYmalls
See On Amazon #17
DIYmalls BN-880 GPS Module with Cables + 1 Set Alligator Clip Wire
Asin: B0D4DYLLVD
1X10pin Alligator Clip Wire Female + 1X10pin Alligator Clip Wire Male.
Features
- 1pcs bn 880 gps module with wires
- 1x10pin alligator clip wire female + 1x10pin alligator clip wire male
- See more on Amazon...
Brand: DIYmalls
See On Amazon #18
DIYmalls BE-880 GPS with Cables + Breadboard Power Module Jumper Wire
Asin: B0D4DXR5XP
1Pcs 400 Breadboard + 1Pcs Power Module + 1Pcs Alligator Clip To Jumper Wire 5P Male & Female.
Features
- 1pcs be880 gps module with cables
- 1pcs 400 breadboard + 1pcs power module + 1pcs alligator clip to jumper wire 5p male & female
- See more on Amazon...
Brand: DIYmalls
See On Amazon #19
DIYmalls BE-880 GPS Module with Cables + Alligator Clip Wire
Asin: B0D4DXGMBP
1X10pin Alligator Clip Wire Female + 1X10pin Alligator Clip Wire Male.
Features
- 1pcs be880 gps module with cables
- 1x10pin alligator clip wire female + 1x10pin alligator clip wire male
- See more on Amazon...
Brand: DIYmalls
See On Amazon
Looking For Something Else?
Search