Frontpage > Product > Diymalls Be-220 Gps Receiver Module Ttl 10Th Chip 38400Bps For Arduino Fpv Aircraft Cc3d Flight Cont...

DIYmalls BE-220 GPS Receiver Module TTL 10th Chip 38400bps for Arduino FPV Aircraft CC3D Flight Control, Replace BN-220 GPS

Asin: B0BTM41627

As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.

DIYmalls BE-220 GPS Receiver Module TTL 10th Chip 38400bps for Arduino FPV Aircraft CC3D Flight Control, Replace BN-220 GPS

...click image to see more on Amazon

-Be 220 Module Connection With Flight Control, Usb To Ttl And Develop Board: Gnd To Gnd, Tx To Rx, Rx To Tx, Vcc To 5V..
-The Blue (Tx) Light Flashes When Power On, Indicating There Is Data Output..
-Be-220 Gps Should Be Used Outdoor, And The Antenna Side Facing To The Sky..
-Baud Rate: 4800Bps To 921600Bps, Default 38400Bps( Remember It Is Not 9600Bps)..

Features

-be220 GPS equiped with 10th chip to replace the bn220 gps, more accurate and receiving signal faster.
-Baud Rate: 4800bps to 921600bps, default 38400bps( Remember it is NOT 9600bps).
-be 220 module connection with flight control, usb to ttl and develop board: gnd to gnd, tx to rx, rx to tx, vcc to 5v.
-be-220 gps should be used outdoor, and the antenna side facing to the sky.
-The blue (TX) light flashes when power on, indicating there is data output.
See more on Amazon...

Brand: DIYmalls | Manufacturer: DIYmalls

Warranty: 30 days

Amazon Price: $19.98 | as of 05/23/2024 (2:27pm pst) *DETAILS
Availability: In Stock

See On Amazon

Similar To DIYmalls BE220 GPS Receiver Module

Name: DIYmalls BE-220 GPS Receiver Module TTL 10th Chip 38400bps for Arduino FPV Aircraft CC3D Flight Control, Replace BN-220 GPS
Price: 19.98 USD

HiLetgo GY-NEO6MV2 NEO-6M GPS Flight Controller Module 3V-5V with Super Strong Ceramic Antenna for Arduino EEPROM APM 2.5

Asin: B01D1D0F5M | Model: 3-01-1087 | PartNumber: 3-01-1087

...click image to see more on Amazon

With Data Backup Battery;With Led Signal Indicator.
Compatible With A Variety Of Flight Control Module.
Default Baud Rate: 9600, Interface: Rs232 Ttl.
Save The Configuration Parameter Data Eeprom Down.

Features

Module with a ceramic antenna, superior signal
Save the configuration parameter data EEPROM Down
With data backup battery;With LED signal indicator
Default baud rate: 9600, Interface: RS232 TTL
Compatible with a variety of flight control module
See more on Amazon...

Brand: HiLetgo | Manufacturer: HiLetgo

Amazon Price: $8.99 | as of 05/23/2024 (2:27pm pst) *DETAILS

See On Amazon

GPS Module GPS NEO-6M(Ar duino GPS Drone Microcontroller GPS Receiver) Compatible with 51 Microcontroller STM32 Ar duino UNO R3 with IPEX Antenna High Sensitivity for Navigation Satellite Positioning

Asin: B07P8YMVNT | Model: SN12SF83QOH11452IC | PartNumber: SN12SF83QOH11452IC | Ean: 0608603912524, 0673400165183 | UPC: 673400165183, 608603912524

...click image to see more on Amazon

Gps Baud Needs To Be Set To 9600 Instead Of 4800; Pps Pin Is Not Needed Unless Using The Gps To Drive A Hardware High Precision Clock; Gt-U7 Main Module Gps Module Using The Original Ublox 7Th Generation Chip, Software Is Compatible With Neo-6M. Gt-U7 Module, With High Sensitivity, Low Power Consumption, Miniaturization, Its Extremely High Tracking Sensitivity Greatly Expanded Its Positioning Of The Coverage.
Usb Directly Connected To The Computer, That Is, With The Host Computer-Owned Serial Port Function, No Need For External Serial Module, Send Ipx Interface Active Antenna.
With A Usb Interface, You Can Directly Use The Phone Data Cable On The Computer Point Of View Positioning Effect; With Ipex Antenna Interface, The Default Distribution Of Active Antenna, Can Be Quickly Positioned.
Note: Please Use The Gt-U7 Gps Module In An Open Place, The Led Will Flash After The Satellite Signal Is Found. Bad Weather And Indoor Use Will Affect The Accuracy Of Positioning.

Features

How to use the GPS module better, the link is obtained in the Product guides and documents, please download it before use
Note: Please use the GT-U7 GPS module in an open place, the LED will flash after the satellite signal is found. Bad weather and indoor use will affect the accuracy of positioning
GPS baud needs to be set to 9600 instead of 4800; PPS pin is not needed unless using the GPS to drive a hardware high precision clock; GT-U7 main module GPS module using the original UBLOX 7th generation chip, Software is compatible with NEO-6M. GT-U7 module, with high sensitivity, low power consumption, miniaturization, its extremely high tracking sensitivity greatly expanded its positioning of the coverage
With a USB interface, you can directly use the phone data cable on the computer point of view positioning effect; With IPEX antenna interface, the default distribution of active antenna, can be quickly positioned
USB directly connected to the computer, That is, with the host computer-owned serial port function, no need for external serial module, send IPX interface active antenna
See more on Amazon...

Brand: MakerFocus | Manufacturer: MakerFocus

Dimensions: 0.39 x 1.09 x 3.94 inches | Weight: 0.01 pounds

Amazon Price: $12.99 | as of 05/23/2024 (2:27pm pst) *DETAILS

See On Amazon

GPS Module Receiver,Navigation Satellite Positioning NEO-6M (Arduino GPS, Drone Microcontroller, GPS Receiver) Compatible with 51 Microcontroller STM32 Arduino UNO R3 with Antenna High Sensitivity

Asin: B084MK8BS2 | Ean: 0608603912524 | UPC: 608603912524

...click image to see more on Amazon

Usb Directly Connected To The Computer, That Is, With The Host Computer-Owned Serial Port Function, No Need For External Serial Module, Send Ipx Interface Active Antenna;.
If You Have Any Issue When Using Our Product,Or You Need Product Use Documentation, Please Contact Us Directly For Assistance.We Will Reply Your Problem In 24 Hours.We Try Our Best To Provide The Most Professional Service For Each Customer..
Gt-U7 Main Module Gps Module Using The Original Ublox 7Th Generation Chip, Software Is Compatible With Neo-6M. Gt-U7 Module, With High Sensitivity, Low Power Consumption, Miniaturization, Its Extremely High Tracking Sensitivity Greatly Expanded Its Positioning Of The Coverage;.

Features

With a USB interface, you can directly use the phone data cable on the computer point of view positioning effect; With IPEX antenna interface, the default distribution of active antenna, can be quickly positioned;
GT-U7 main module GPS module using the original UBLOX 7th generation chip, Software is compatible with NEO-6M. GT-U7 module, with high sensitivity, low power consumption, miniaturization, its extremely high tracking sensitivity greatly expanded its positioning of the coverage;
USB directly connected to the computer, That is, with the host computer-owned serial port function, no need for external serial module, send IPX interface active antenna;
If you have any issue when using our product,or you need product use documentation, please contact us directly for assistance.we will reply your problem in 24 hours.We try our best to provide the most professional service for each customer.
See more on Amazon...

Brand: Deegoo-FPV | Manufacturer: Deegoo-FPV

Amazon Price: $12.99 | as of 05/23/2024 (2:27pm pst) *DETAILS

See On Amazon

Stemedu VK172 GPS Module USB G-Mouse Dongle Receiver GPS/GLONASS Tracker for Windows 10/8/7/vista/XP for Goo.gle Earth/Andorid/Linux/Raspberry Pi System

Asin: B07QRGK7ZK | Model: 10 | PartNumber: 10 | Ean: 0768390744552 | UPC: 768390744552

...click image to see more on Amazon

🚩 Plugged This Vk 172 Usb Gps Module Into Linux Machine, Detected As Ttyacm0. No Additional Drivers Or Configuration Required.
🚩 Please Find The User Manual [Pdf ] Of Vk172 / User Guide [Pdf ] On This Listing Page - Technical Specification.
🚩 You Need Install The Driver Before Use This Usb Gps Dongle.
🚩 The Default Output Of Vk 172 G-Mouse Is The Product Gps Protocol Data. You Can Test The Software Or Serial Commands To Modify Switch Ps / Glonass Protocol Data..

Features

This VK-172 usb gps receiver module can support Windows, Andorid, Linux sytem, Raspberry PI and EMGRAND car and Goo()gle Earth.
The default output of Vk 172 g-mouse is the product GPS protocol data. You can test the software or serial commands to modify switch PS / GLONASS protocol data.
Plugged this VK 172 USB GPS module into linux machine, detected as ttyACM0. No additional drivers or configuration required
You need install the driver before use this USB GPS dongle
Please find the User Manual [pdf ] of VK172 / User Guide [pdf ] on this listing page - Technical Specification
See more on Amazon...

Brand: Stemedu | Manufacturer: Stemedu

Dimensions: 0.39 x 2.36 x 1.18 inches

Amazon Price: $12.99 | as of 05/23/2024 (2:27pm pst) *DETAILS

See On Amazon

DIYmalls BN-220 GPS Module TTL Dual GPS Glonass w/Flash NMEA-0183 9600bps 1Hz for Arduino RC FPV Drone Flight Control

Asin: B086ZK9BT4 | Ean: 0747356637565 | UPC: 747356637565

...click image to see more on Amazon

Bn220 Gps Has Flash To Save Configuration, So You Do Not Need To Reset Data Next Time When You Use It. But Bn220 Gps Doesn't Have Compass. If You Need Gps With Flash And Compass, Please Check Bn-880 Gps Via "Visit The Diymalls Store".
If You Have Any Problem, Please Do As Follow: Click "Diymalls"(You Can Find "Sold By Diymalls" Under Buy Now Button), In The New Page, Click "Ask A Question"..
Data Level : Ttl Or Rs-232,Default Ttl Level. To Make It Be Rs232 Output, You Need To Use One Ttl To Rs232 Converter Cable.
When You Power Up Bn 220 Gps Module The First Time In A New Location, It Always Takes Longer To Find Satillites. This Is Referred To As “Cold Start”. Once You’Ve Done It The First Time, Later When You Restart Bn220 Gps Module, It Will Get A Lock Much Faster..

Features

When you use it for pi, there is no driver installation needed but you need to install software
When you power up bn 220 GPS module the first time in a new location, it always takes longer to find satillites. This is referred to as cold start . Once you ve done it the first time, later when you restart bn220 GPS module, it will get a lock much faster.
bn220 gps has flash to save configuration, so you do not need to reset data next time when you use it. But bn220 gps doesn't have compass. If you need gps with flash and compass, please check bn-880 gps via Visit the DIYmalls Store
Data Level : TTL or RS-232,Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable
If you have any problem, please do as follow: click DIYmalls(you can find Sold by DIYmalls under Buy Now button), in the new page, click Ask a question.
See more on Amazon...

Brand: DIYmalls | Manufacturer: DIYmalls

Dimensions: 0.59 x 7.48 x 3.15 inches | Weight: 0.02 pounds

Amazon Price: $20.98 | as of 05/23/2024 (2:27pm pst) *DETAILS

See On Amazon

Geekstory BN-220 Dual GPS Glonass Module Navigation TTL Level 9600bps + GPS Passive Antenna for Arduino Raspberry Pi Pixhawk F3 CC3D Betaflight F4 Flight Control

Asin: B07PRDY6DS | Ean: 0747356629621 | UPC: 747356629621

...click image to see more on Amazon

The Tx Led Flash Means Gps Module Output Normally.The Pps Led Flash Means Gps Module Locate Your Place..
Bn 220 Gps Module Documentation Link Cannot Be Displayed. If You Need Technical Documentation, Please Click “Ask A Question” To Em-Ail Us.
Data Level : Ttl Or Rs-232,Default Ttl Level. To Make It Be Rs232 Output, You Need To Use One Ttl To Rs232 Converter Cable.
When You Use It For Raspberry Pi, There Is No Driver Needed But You Need To Install Software.

Features

BN-220 gps module has flash to save configuration, so you do not need to reset data next time when you use it. But it has no compass. If you need gps with flash and compass, please buy bn-880 from Geekstory.
When you use it for Raspberry Pi, there is no driver needed but you need to install software
The TX LED flash means gps module output normally.The PPS LED flash means gps module locate your place.
Data Level : TTL or RS-232,Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable
BN 220 gps module documentation link cannot be displayed. If you need technical documentation, please click Ask a question to em-ail us
See more on Amazon...

Brand: Geekstory | Manufacturer: Geekstory

Dimensions: 0.87 x 0.79 x 0.79 inches | Weight: 0.01 pounds

Amazon Price: $21.98 | as of 05/23/2024 (2:27pm pst) *DETAILS
List Price: $24.98

See On Amazon

Geekstory BN-880 GPS Module U8 with Flash HMC5883L Compass + GPS Active Antenna Support GPS Glonass Beidou Car Navigation for Arduino Raspberry Pi Aircraft Pixhawk APM Flight Controller

Asin: B078Y6323W | Model: FZ2920 | PartNumber: FZ2920 | Ean: 0702795764043 | UPC: 702795764043

...click image to see more on Amazon

Bn 880 Gps Module Has Flash To Save Configuration. So You Do Not Need To Reset Next Time When You Use It.
When You Use It For Raspberry Pi, There Is No Driver Needed But You Need To Install Software.
Dits Data Level Is Ttl Or Rs-232, Default Ttl Level. To Make It Be Rs232 Output, You Need To Use One Ttl To Rs232 Converter Cable.
Bn 880 Gps Module Is Dual Module Compass, With And Electronic Compass Ic Hmc5883l.

Features

BN-880 is suitable for Open source flight controller, not for flight control with SCM
Bn 880 gps module is dual module compass, with and electronic compass IC HMC5883L
Bn 880 gps module has flash to save configuration. So you do not need to reset next time when you use it
DIts data Level is TTL or RS-232, Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable
When you use it for Raspberry Pi, there is no driver needed but you need to install software
See more on Amazon...

Brand: Geekstory | Manufacturer: Geekstory

Dimensions: 0.39 x 1.18 x 1.18 inches | Weight: 0.04 pounds

Amazon Price: $33.98 | as of 05/23/2024 (2:27pm pst) *DETAILS

See On Amazon

Geekstory BE-280 GPS Module M10050 Chip with Ceramic Antenna Positioning Tracking TTL Level 38400bps Beidou GPS Antenna for Arduino Raspberry Pi Aircraft Pixhawk APM Flight Controller

Asin: B0BV6295F9 | Model: GR6062 | PartNumber: GR6062

...click image to see more on Amazon

Data Level : Ttl Or Rs-232, Default Ttl Level. To Make It Be Rs232 Output, You Need To Use One Ttl To Rs232 Converter Cable..
What You Will Get: 1*Be-280 Gps Module; 1*1.25Mm 6Pins Cable; 1* 1.25Mm 6P Connector Male Cable; 1*1.25Mm 6P Connector Female Cable.
The Tx Led Flash Means Gps Module Output Normally. The Pps Led Flash Means Gps Module Locate Your Place. Baud Rate : 4800Bps To 921600Bps, Default 38400Bps..
This Be-280 Gps Module Using The Latest 10Th Generation Chip. When You Use It For Raspberry Pi, There Is No Driver Needed. Here Is Connection With Rpi, Red To 3.3V, Black To Gnd, Green To Txd, White To Rxd..

Features

BE-280 gps module without flash memory to save configuration, so you need to reset data next time when you use it. And it has no compass. If you need gps with flash and compass, please buy bn-880 bn-880q or be-880 be-880q from Geekstory
This BE-280 GPS Module using the latest 10th generation chip. When you use it for Raspberry Pi, there is no driver needed. Here is connection with RPi, red to 3.3v, black to gnd, green to txd, white to rxd.
Data Level : TTL or RS-232, Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable.
The TX LED flash means gps module output normally. The PPS LED flash means gps module locate your place. Baud Rate : 4800bps to 921600bps, Default 38400bps.
What you will get: 1*BE-280 GPS Module; 1*1.25mm 6pins Cable; 1* 1.25mm 6P Connector Male Cable; 1*1.25mm 6P Connector Female Cable
See more on Amazon...

Brand: Geekstory | Manufacturer: Geekstory

Dimensions: 0.39 x 1.18 x 1.18 inches

Warranty: Six Months

Amazon Price: $21.98 | as of 05/23/2024 (2:27pm pst) *DETAILS

See On Amazon

2PCs Beitian BE220 M8N GPS Module Support GPS GLONASS BeiDou for RC Long Range FPV Racing Drone Airplane

Asin: B081YTBNLY | Model: BN-220 | PartNumber: BN-220 | Ean: 0727161343462 | UPC: 727161343462

...click image to see more on Amazon

When It Is Used On Raspberry Pi, It Is Not Necessary To Install The Driver, But The Software Must Be Installed.
If You Have Any Questions, You Can Contact Us At Any Time.
If The Tx Led Indicator Flashes, It Means That The Be220 M8n Gps Module Is Operating Normally, And The Pps Led Indicator Flashes To Indicate That The Gps Module Has Found Your Location.
Note: It Does Not Have A Compass.

Features

The BE220 M8N GPS module has a flash memory function to save the configuration, which can help you do not need to reset the data next time you use it.
Note: it does not have a compass
When it is used on Raspberry Pi, it is not necessary to install the driver, but the software must be installed
If the TX LED indicator flashes, it means that the BE220 M8N GPS module is operating normally, and the PPS LED indicator flashes to indicate that the GPS module has found your location
If you have any questions, you can contact us at any time
See more on Amazon...

Brand: SoloGood | Manufacturer: Beitian

Dimensions: 0.02 x 0.03 x 0.03 inches

Amazon Price: $25.99 | as of 05/23/2024 (2:27pm pst) *DETAILS

See On Amazon

#10

DIYmalls BE-180 GPS Receiver Module TTL 10th Chip 38400bps for Arduino FPV Aircraft CC3D Flight Control, Replace BN-180 GPS

Asin: B0BTM3QRDJ

...click image to see more on Amazon

-Be 180 Module Connection With Flight Control, Usb To Ttl And Develop Board: Gnd To Gnd, Tx To Rx, Rx To Tx, Vcc To 5V..
-The Blue (Tx) Light Flashes When Power On, Indicating There Is Data Output..
-Be-180 Gps Should Be Used Outdoor, And The Antenna Side Facing To The Sky..
-Baud Rate: 4800Bps To 921600Bps, Default 38400Bps( Remember It Is Not 9600Bps)..

Features

-be180 GPS equiped with 10th chip to replace the bn180 gps, more accurate and receiving signal faster.
-Baud Rate: 4800bps to 921600bps, default 38400bps( Remember it is NOT 9600bps).
-be 180 module connection with flight control, usb to ttl and develop board: gnd to gnd, tx to rx, rx to tx, vcc to 5v.
-be-180 gps should be used outdoor, and the antenna side facing to the sky.
-The blue (TX) light flashes when power on, indicating there is data output.
See more on Amazon...

Brand: DIYmalls | Manufacturer: DIYmalls

Warranty: 30 days

Amazon Price: $16.98 | as of 05/23/2024 (2:27pm pst) *DETAILS

See On Amazon

#11

Geekstory DY-180TTL GPS Receiver Module Dual Glonass GPS Navigation Module TTL Level 9600bps with GPS Antenna for Arduino FPV Aircraft,Replace BN-180 GPS

Asin: B0CGQXNW35

...click image to see more on Amazon

Data Level : Ttl Or Rs-232, Default Ttl Level. To Make It Be Rs232 Output, You Need To Use One Ttl To Rs232 Converter Cable..
What You Will Get: 1 X Dy-180Ttl Gps Module, 3 X 4P 1.0Mm Pitch Cable.
This Dy-180Ttl Gps Module Does Not Have Flash And Cannot Be Saved. 72 Searching Channel Support Rate : 4800Bps To 921600Bps, Default 9600Bps..
The Pw Led Flash Means Gps Module Output Normally. The Pps Led Flash Means Gps Module Locate Your Place. Note: Without Pps Output, Only Pps Indicator.

Features

This DY-180 TTL GPS Module can show your speed. When you use it for Raspberry Pi, there is no driver needed. Here is connection with RPi, red to 3.3v, black to gnd, green to txd, white to rxd.
The PW LED flash means gps module output normally. The PPS LED flash means gps module locate your place. Note: without PPS output, only PPS indicator
Data Level : TTL or RS-232, Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable.
This DY-180TTL GPS Module does not have FLASH and cannot be saved. 72 Searching Channel Support Rate : 4800bps to 921600bps, Default 9600bps.
What you will get: 1 X DY-180TTL GPS Module, 3 X 4P 1.0mm Pitch Cable
See more on Amazon...

Brand: Geekstory | Manufacturer: Geekstory

Dimensions: 0.32 x 2.72 x 1.81 inches

Amazon Price: $16.99 | as of 05/23/2024 (2:27pm pst) *DETAILS

See On Amazon

#12

Beitian GPS Module with Antenna UAV Drone M10050 M9140 chip Ultra-Low Power GNSS Receiver for Track GPS BE-180 BK-180 BN-180 BE-220 BK-220 BN-220

Asin: B0C8HW6QQ7

...click image to see more on Amazon

With Flash, The Configuration Can Be Changed, And The Power Will Not Be Lost.
Note: Please Use The Gps Module In An Open Place, The Led Will Flash After The Satellite Signal Is Found. Bad Weather And Indoor Use Will Affect The Accuracy Of Positioning..
Not Positioned, The Light Is Off; After 3D Positioning, The Blue Light Flashes.
The Red Light, The Pps Light, Does Not Light Up If It Is Not Positioned; After 3D Positioning, It Starts To Flash..

Features

Update rate: 0.25Hz-18Hz,default 10Hz
The red light, the PPS light, does not light up if it is not positioned; after 3D positioning, it starts to flash.
With FLASH, the configuration can be changed, and the power will not be lost
Not positioned, the light is off; after 3D positioning, the blue light flashes
Note: Please use the GPS module in an open place, the LED will flash after the satellite signal is found. Bad weather and indoor use will affect the accuracy of positioning.
See more on Amazon...

Brand: Beitian | Manufacturer: Beitian

Amazon Price: $15.88 | as of 05/23/2024 (2:27pm pst) *DETAILS

See On Amazon

#13

Geekstory BN-220 Dual GPS Glonass Module Navigation TTL Level 9600bps with GPS Passive Antenna+CP2102 6 in 1 USB-UART Serial Adapter Module with 4P Dupont Cable Jumper Wire,Female to Female for Window

Asin: B0B76DLH3N

...click image to see more on Amazon

Data Level : Ttl Or Rs-232,Default Ttl Level. To Make It Be Rs232 Output, You Need To Use One Ttl To Rs232 Converter Cable.
Cp2102 Serial Adapter Module Compatible With Windows 7/8/10, Linux, Arduino, Nextion Display, Beitian Gps Module, Esp8266 Transceiver Indicator : When The Serial Line To Send Or Receive Data Lines , The Board Will Receive Indicator Lights For Easy Debugging.
6 In 1 Multifunctional Interface Module Supports Usb To Ttl, Usb To 232, Usb To 485, Ttl To 232, Ttl To 485, 232 To 485. Serial Interface Module Cp2102 Usb Ttl 485 232 Mutual Transfer, Before Using The 6 In 1 Multifunctional Interface Module, You Need To Install The Cp2102 Driver.
When You Use It For Raspberry Pi, There Is No Driver Needed But You Need To Install Software. The Tx Led Flash Means Gps Module Output Normally.The Pps Led Flash Means Gps Module Locate Your Place..

Features

BN-220 gps module has flash to save configuration, so you do not need to reset data next time when you use it. But it has no compass. If you need gps with flash and compass, please buy bn-880 from Geekstory.
When you use it for Raspberry Pi, there is no driver needed but you need to install software. The TX LED flash means gps module output normally.The PPS LED flash means gps module locate your place.
Data Level : TTL or RS-232,Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable
6 in 1 Multifunctional interface module supports USB to TTL, USB to 232, USB to 485, TTL to 232, TTL to 485, 232 to 485. Serial Interface Module CP2102 USB TTL 485 232 Mutual Transfer, Before using the 6 in 1 Multifunctional interface module, you need to install the CP2102 driver
CP2102 serial adapter module compatible with Windows 7/8/10, Linux, Arduino, nextion display, beitian gps module, ESP8266 Transceiver indicator : When the serial line to send or receive data lines , the board will receive indicator lights for easy debugging
See more on Amazon...

Brand: Geekstory

Amazon Price: $35.98 | as of 05/23/2024 (2:27pm pst) *DETAILS

See On Amazon

#14